From the Sector

Looking back, 2021 was a positive year for the Albstadt-based circular knitting machine and braiding machine manufacturer Mayer & Cie. After two tough years, sales exceeded Euro 100 million again last year, and the outlook for this year is promising, with production working at long-term full capacity in the circular knitting machine sector.

In order to maintain its market edge Mayer & Cie. continues to rely on digitisation of both its processes and its products. Substantial investment at its headquarters location, especially in machinery, is on the Mayer & Cie. agenda for 2022. In the years ahead a range of production machinery – lathes, gear cutting and grinding machines – is to be replaced at a scheduled cost running into low double-digit millions. Last year saw an investment in a robot-controlled laser hardening system for heat-treating machine components. The company passes an energy upgrade milestone these days with launching its new CHP cogeneration units.  
 
“Compared with 2020, our Group sales were up by about 40 per cent in 2021,” said Mayer & Cie. Managing Director Benjamin Mayer. After two difficult years in 2019 and 2020 the circular knitting machine manufacturer was able last year to restore sales to a stable level of about 103 million Euro. And it could have achieved an even better result. “Supply chain problems hampered production perceptibly,” the company’s managing director said. “In view of the order situation up to five per cent more might have been possible.” The Albstadt textile machinery manufacturer’s order position has stayed at a sound, high level since the fourth quarter of 2020, and orders in hand will already keep the circular knitting machine division busy until the end of the year, with orders coming in from all over the world, but especially, and with no change, from the company’s core markets Turkey, China and India.

The Management views with concern, however, the conflict in the Ukraine, which at first glance may not affect the sales market directly but might lead to general purchasing restraint in the capital goods sector that like the trade war between the United States and China, which began in 2018, would also affect Mayer & Cie. In addition, effects of the conflict such as high energy prices and interruptions in material supplies and logistics pose a genuine challenge in the further course of the year.

In the braiding machine division, the order position recovered in 2021. Sales of new machines and, especially, spare parts exceeded the 2020 figures significantly. Mayer & Cie. has once more won an award for its in-house and external digitisation measures as one of the most innovative German SMEs. The textile machinery manufacturer won a 2022 Top 100 award for its innovative processes in particular.

TEXO AB, a member of TMAS, the Swedish textile machinery association, is currently seeing a surge in demand for its Compfelt weaving looms for press felt base fabrics.

“These are far from standard machines,” explains TEXO President Anders Svensson. “Off-the-shelf industrial weaving machines generally range in their working widths from 1.9 to 3.2 metres, with those purpose-built for technical applications such as geotextiles extending to wider widths of six metres and beyond. Meanwhile, one of the machines we have recently successfully delivered and commissioned has a working width of 23 metres and is not even the widest of the many such machines the company has engineered and delivered worldwide since its formation.”

A second recently-delivered line has a more modest working width – in relative terms – of 13 metres.

Paper machines
The demand for such machines comes from the suppliers of paper machine clothing (PMC) to paper mills, who in turn operate colossal machines for paper manufacturing.
On of the largest paper making machines is currently believed to be located on Hainan Island off the southern coast of China and is 428 metres long – roughly the length of four football pitches. Naturally, such machines require equally large-scale components, which is where TEXO comes in. All paper machines require a regular supply of PMC fabrics which are employed in three separate areas of the paper machine – the forming section, the press section and the drying section.

Press felts
TEXO Compfelt weaving machines are specifically employed for the production of endless (tubular) woven base fabrics for the press section of paper machines, where water is mechanically removed from the newly formed sheet of fibres. In the simplest press, the sheet is carried by the PMC fabric between two rolls, where water is squeezed out by the application of load and pressure. This can also be assisted by the use of vacuum and heat. The PMC fabrics here need to be replaced regularly, with a maximum lifespan of six months.

Press felts have become increasingly sophisticated over the years, consisting of complex woven base structures which are subsequently combined with nonwovens via needlepunching on equally huge machines. The woven base fabrics are primarily made from polyamide for its strength and hygroscopic and elastic properties.

Dobby harness
“A major refinement of the machine has been the ability to equip it with up to 24 dobby harness frames to meet the demand for sophisticated structures from the PMC manufacturers. Although the PMC business represents a small proportion of the total cost of manufacturing paper, it can have a significant impact on the quality of the paper, the efficiency of a machine and machine production rates.”

Another significant development has been that of a self supporting base pre-filled with concrete, which has eliminated the need to dig out foundations in a plant to support the machine.

Retrofits
TEXO’s looms are built to last, but technology moves forward, and the company is also currently active in the retrofitting of existing machines built as far back as the 1970s.

Integration
TEXO has also just integrated its offices and production centre at its base in Älmhult, Sweden, to create a unified 5,000 square metre site.

Over 600 delegates from 58 countries subscribed to the latest VDMA textile machinery webinar on sustainable dyeing held on February 3rd, 2022 – a record since the monthly online series started in June 2020. The webinar, entitled ‘Resource-saving in Textile Processing – Continuous Dyeing and Washing’, involved the three companies Monforts, DyStar® and Goller.

In outlining the capabilities of Monforts Thermex hotflue lines for the Econtrol® continuous dyeing process, the company’s Textile Technologies Engineer Jonas Beisel observed that the current industry focus is very much on cleaner processes and products in accordance with the Corporate Social Responsibility (CSR) commitments of the major fashion brands, and with further regulations to be expected.

Cellulosics
Econtrol® is a continuous process for the dyeing of woven cellulosic fabrics that has already been well proven on the market, with over 150 Monforts Thermex lines already in operation at mills worldwide.

Reactive dyestuffs are fixed into the fabric in a one-step dyeing and drying process with a controlled combination of steam and air. The entire pad-dry process takes just two-to-three minutes at a temperature of between 120-130°C and a relative humidity volume of 25-30%.

Benefits
The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step.

Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

Complementary services and systems
Complementing the Monforts presentation during the webinar, Bertram Seuthe, Global Business Development Manager at DyStar, outlined the importance of specific Levafix® /Remazol® reactive dyes and Dianix® disperse dyes for sustainable dyeing processes such as Econtrol®, Cadira® Continuous and CPB knit. In these processes Sera® auxiliaries are also employed for optimised wash-off results.

Guido Seiler, Area Sales Manager at Fong's Europe, also introduced the latest developments of the Goller brand for the washing process, which can reduce water consumption by between 10 to 20%, as well as reductions in both heating energy and waste generation, depending on the specific fabric construction and required shade.

In January 2022, international technology group ANDRITZ successfully started up its latest-generation tearing line for spinning grade fibers delivered to Sasia at its Ribeirão premises, Portugal.

The scope of supply includes a seven-cylinder Jumbo tearing machine dedicated to spinning grade fibers. As the first of its kind in Portugal, the machine contains the latest ANDRITZ Laroche innovation for fiber opening, featuring a new-generation pinning configuration.

ANDRITZ has worked closely with Sasia for more than half a century, offering both cutting-edge solutions for recycling as well as every possible fine-tuning customization to support Sasia’s goals. Sasia’s plant now has four state-of-the-art ANDRITZ Laroche tearing lines.

A pioneer in the textile recycling industry since its foundation in 1952, Sasia is engaged in the circular economy with the aim of reducing textile waste by turning it into usable raw material again, increasing ability to compete as well as promoting innovation and sustainability.

This order not only underlines ANDRITZ’s position as the leading supplier worldwide of textile recycling lines, but also highlights its ability to bring continuous improvement with sustainable solutions and versatility to its customers.

Comber machines from Trützschler are already trusted by customers across the textiles industry and around the globe. The TCO 21 is the latest addition to their portfolio and was built to boost productivity,  ensure quality and support increased automation.

High productivity and raw material savings
One of the key benefits of the TCO 21 is its advanced processing speed. This next-generation combing machine is able to produce at a rate of up to 600 nips per minute. the TCO 21 can also be coordinated with Trützschler’s JUMBO CANS (Ø 1.200 mm). They not only reduce yarn defects due to fewer piecings which leads to quality improvements, but also offer a higher efficiency because of their larger dimensions. This, for example, has positive effects on the number of necessary cans and can transports – and results in lower personnel costs.

Excellent yarn quality
The TCO 21 comes with COUNT MONITORING as standard. This feature makes it possible for the machine operator to define limits for count variations via an easy-to-use display. Trützschler’s DISC MONITOR system of sensors measures the count continuously, and the machine alerts the operator and switches off if the limit is exceeded. In addition, the COUNT MONITORING function also includes spectrogram analysis.

Customers can further strengthen their focus on quality by choosing to add the COUNT CONTROL function to the TCO 21. It is managed via the same easy-to-use display, and offers automatic sliver count measurement, as well as spectrogram analysis. It also automatically regulates the main draft during production to balance count variations and ensure the desired sliver count. This feature is particularly attractive for customers who manufacture blends of cotton and synthetic, as it can also be used to avoid variations in the overall yarn composition.

Automatic optimization
The TCO 21 joins the TCO 12 from Trützschler as an combing machine that offers automatic PIECING OPTIMIZER technology, and that finds the right piecing setting without a single laboratory test, because of two functions: First by adjusting the piecing time in the combing cycle (timing function). Whereas the resetting of the detaching point (piecing time) is usually a very time-consuming task, it now takes only a few minutes and is performed automatically at a push on a button. Second the customer is helped to select specific detaching curve types (curve function) for their unique requirements.

Easy operation
The TCO 21 is simple to operate and maintain. The SMART TOUCH display is fast and intuitive, and a Radio-Frequency Identification (RFID) sensor quickly identifies each user and adapts the information on the display to their individual needs. The multi-colored T-LED display provides visual indications of the machine’s status or quality parameters over large distances which enables the operator recognizing them at a glance in the entire spinning mill. The TCO 21 is built with original Trützschler electronics that ensure high performance and durability: Their intelligent cooling system, that has already proven itself in the draw frame TD 10, contributes to a longer service life by reducing the operating temperature of electronic power components. Even if components have to be replaced at some point, the customer can keep their spare parts inventory small, because they can switch also electronics spare parts flexibly between different machine types, e.g. cards and draw frames. The option to add an automatic greasing function completes the easy operation of the TCO 21.

Members of TMAS – the Swedish textile machinery association – are proving instrumental in pioneering new sustainable processes for the dyeing, finishing and decoration of textiles.

The wasteful processes involved in these manufacturing stages are only one component in the development of viable circular supply chains for textiles that are now being established in Sweden.

At the recent Conference on Sustainable Finishing of Textiles, held across three separate afternoons on September 30^th, October 1^st and October 7^th, delegates heard that Sweden will introduce extended producer responsibility (EPR) for waste textiles and clothing at the beginning of 2022, ahead of the adoption of a similar European Union-wide EPR system in 2025.

New fibers
Swedish companies are also active in the development of new fibers derived from waste clothing, building on the country’s legacy leadership in pulp and paper production.

At the Sustainable Finishing of Textiles Conference, however, it was said that all of the environmental gains made by such sustainable new fibers can potentially be cancelled out in the further processing they are subjected to – and especially in resource-intensive conventional dyeing, finishing and decoration.

TMAS members Baldwin Technology and Coloreel have both developed solutions to address this issue.

TexCoat G4
During the conference, Baldwin’s VP of Global Business Development Rick Stanford explained that his company’s TexCoat G4 non-contact spray technology significantly reduces water, chemistry and energy consumption in the finishing process. It consistently and uniformly sprays chemistry across a fabric surface and applies it only where needed, on one or both sides.

Instant coloring
Coloreel’s CEO Mattias Nordin outlined the benefits of his company’s technology which enables the high-quality and instant coloring of a textile thread on-demand and can be paired with any existing embroidery machine without modification. This enables unique effects like shades and gradient to be achieved in an embroidery for the first time.

WEIDMANN GmbH in Süßen is known worldwide as a specialist for the finishing of fiber and down-proof articles and woven industrial fabrics. Customers particularly appreciate the company's reliability and flexibility with regard to their individu-al requirements, and consistently high quality of its products. The Swabian textile manufacturer finishes premium fabrics, mainly for the bedding industry, using the latest technology and in an environmentally conscious manner.

The complex production and finishing processes for high-quality fabrics require a reliable and efficient machine technology. With this in mind, WEIDMANN has always relied on the proven stenter technolo-gy from BRÜCKNER. For many decades, the German textile machinery manufacturer has been a world leader in the con-struction of production lines for the finishing of classical textiles, woven industrial  fabrics, nonwovens, glass fabrics and floor coverings. In addition to stenters, the company's production program also in-cludes coating lines, relaxation dryers, sanfor lines, continuous dyeing lines as well as ovens for the bonding of nonwovens and other special lines. All machines are produced 100% in-house in Germany.

Both companies continuously invest in new and innovative technology in order to be successful and competitive today and in the future. Only Recently, a completely newly developed BRÜCKNER stenter was installed in the ultra-modern plant at WEIDMANN. During the intensive project engineering phase it soon became clear which features are of special importance for their daily production requirements:

• uniform moisture distribution in the machine entry and during pick-up of the specialized   chemicals in the finishing padder before the thermoprocess
• weft-straight fabric flow with minimized residual distortion
• very good accessibility for maintenance and daily cleaning
• sensor technology and automation of setting parameters for energy optimization
• heat-recovery with hot water generation for the dye house
• the line must be fully Industry 4.0 capable

Originally conceived as a low-cost, high-volume alternative to knitting and weaving, nonwovens was already expanding its market boundaries by the 1970s with new applications in ‘disposables’ such as diapers, hygiene and teabags.

In the past five decades, the nonwovens business has exploded in all directions, reaching a global market worth USD 40.5 billion in 2020, projected to grow to USD 53.5 billion by 2025. This annual growth rate of 5.7% (MarketsandMarkets, Nonwoven Fabric Market Report) is based on countless new applications and expansion into durable, as well as additional disposable, products.

Major growth drivers include the hygiene sector, and filtration media for power plants and air conditioning systems. Especially during the peak of the COVID pandemic in 2020 and 2021, demand in the hygiene sector multiplied. Worldwide capacities for both meltblown and spunlace production rocketed compared to a normal business year. Swiss Autefa Solutions, for example, significantly benefited from this trend, notably with the launch of a fully-automatic machine for producing face masks.

The automotive industry is the second big growth area, with many new applications being pioneered. The trend to electric and hybrid vehicles has helped this, as nonwovens reinforced with carbon fibres are widely used as battery housings.

Swiss nonwovens competence
Innovative applications across all sectors have driven the rapid evolution of sophisticated nonwovens machinery. Today’s trends demand higher productivity, sustainability and Industry 4.0 compatibility – demonstrated by the full equipment portfolio of Swiss Textile Machinery member Autefa Solutions. With V-Jet Futura, the company recently sealed the link in its product range between web forming and drying technology. This latest Hydroentanglement Machine, together with the SQ-V Square Drum Dryer, embodies advanced technology combined with significant reductions in energy consumption compared to other process solutions.

A vital contribution to nonwovens production is offered by Rieter subsidiary Graf, a leading supplier of clothing and combs for carding and combing processes in spinning and nonwovens. Graf's Hipro card clothings – suitable for any man-made fibres in the nonwovens sector – are focussing on higher productivity. Their superior performance delivers up to 10% higher throughput and greater carding efficiency compared to conventional clothings. These reliable card clothing elements also ensure a consistently reproducible high web quality, as well as 20% fewer failures in the web, thanks to the precise fibre transfer to and from the cylinder.

Another constant trend in nonwovens today is the drive for better quality. Manufacturers want to take charge of contamination levels in their processes, as well as eradicating defects which may arise during production. Uster Technologies, a leading provider of quality management solutions from fibre to fabric, offers a combined solution to achieve both these required quality standards. At the fibre preparation stage, Uster Jossi Vision Shield N ensures the best possible initial inspection and removal of contamination. Then, at the end of the production sequence, Uster EVS Fabriq Vision N handles automated detection and marking of all the main defects caused during production. This combined solution avoids material waste and takes full advantage of the potential for process optimization.

The new series of webinars of the Swiss Oerlikon Group’s Manmade Fibers Solutions business unit will be focusing on services for manmade fiber systems.

Short Overview of the webinars:

• How ceramics within the yarn path improve the quality of your yarn on September 01
• myOerlikon – tailored digital services provide a comprehensive overview on September 13
• Always by your side – with Oerlikon Remote Services on September 22
• Better safe than sorry – maximize productivity and minimize downtimes with regular machine check-ups on September 29

For more information click here, where we keep you informed about upcoming events.

Fibre Extrusion Technology Ltd, UK has completed the installation and commissioning of a new FET Laboratory Spunbond system for the University of Leeds.

This FET spunbond system is now an integral part of the research facilities of the CCTMIH (Clothworkers’ Centre for Textile Materials Innovation for Healthcare), led by Prof. Stephen Russell based in the School of Design, University of Leeds, who commented “The new spunbond system is perfectly suited to our academic research work, and is already proving itself to be extremely versatile and intuitive to use”.
 
This spunbond system complements existing research lab facilities at the university, which covers all areas of fibre and fabric processing, physical testing and characterisation. It forms part of a wider investment in facilities to support fundamental, academic research on ‘future manufacturing’ for medical devices, where the focus is on studying small-scale processing of unconventional polymers and additive mixes to form spunbond fabrics with multifunctional properties.
 
Key to this research is developing the underlying process-structure-performance relationships, based on the measured data, to provide detailed understanding of how final fabric performance can be controlled during processing.

As a rule, many exciting materials developed in academic research struggle to progress beyond the bench, because of compatibility issues with key manufacturing processes such as spunbond. By leveraging mono, core-sheath and island-in-the-sea bicomponent technology, the Leeds University team is working with polymer and biomaterial research scientists, engineers and clinicians to explore the incorporation of unusual materials in spunbond fabrics, potentially widening applications.
 
FET has built on its melt spinning expertise to develop a true laboratory scale spunbond system and is currently working on a number of other such projects globally with research institutions and manufacturers.