From the Sector

Reset
191 results
05.02.2019

The 10 Startups shaking the Composites Industry at JEC World 2019

After the success of the two first editions, JEC World organizes the third edition of Startup Booster, the leading startup competition in Composites, where ten startups will present their innovation in front of a jury of experts.

EC Group launched Startup Booster programme in 2017 to get closer to the startup world, to attract the new generation of composites entrepreneurs and put them at the forefront of the industry.

The program gives the floor to 10 startups, each of them having five minutes to present their innovation, on March 12, 2019, from 10.30 AM in Agora Stage (Hall 5) in front of a jury of experts from the composites industry.

These 10 startups will be also showcasing within the Startup Booster Village, during the three days, and will benefit from a dedicated program, including workshops with Startup Booster Main Innovation partners’ Airbus & Daimler, and Innovation partner’s Altair.

After the success of the two first editions, JEC World organizes the third edition of Startup Booster, the leading startup competition in Composites, where ten startups will present their innovation in front of a jury of experts.

EC Group launched Startup Booster programme in 2017 to get closer to the startup world, to attract the new generation of composites entrepreneurs and put them at the forefront of the industry.

The program gives the floor to 10 startups, each of them having five minutes to present their innovation, on March 12, 2019, from 10.30 AM in Agora Stage (Hall 5) in front of a jury of experts from the composites industry.

These 10 startups will be also showcasing within the Startup Booster Village, during the three days, and will benefit from a dedicated program, including workshops with Startup Booster Main Innovation partners’ Airbus & Daimler, and Innovation partner’s Altair.

“Daimler being one of the main Innovation Partner of the Startup Booster, we are looking for innovations, in particular sustainable technologies and processes”, said Dr. Karl-Heinz FUELLER, Responsible for material innovations and BIW concept development, Daimler AG.

“As a main Innovation Partner of the Startup Booster competition we get fantastic direct engagement with the innovators who are defining solutions for the future”, said Jelle BLOEMHOF, Head of Manufacturing Technologies of Composite at Airbus.

More information:
JEC World JEC World 2019
Source:

Agence APOCOPE

Martin Greenfield premium suits made with Bemberg™ lining (c) Bemberg™
Martin Greenfield premium suits made with Bemberg™ lining
17.12.2018

Asahi Kasei Bemberg™ Excited to Return to Première Vision New York 15 - 16 January, 2019 Booth

Since 1931, Bemberg™ is a new material definition for responsible luxury. The one for cool exquisite comfort, whose smart heritage is born in a circular economy. Made by Asahi Kasei, the company is the sole maker of this one-of-a-kind, matchless, high-tech natural material, with a unique and precious touch and feel.

Starting from September 2018, Asahi Kasei has launched the Bemberg™ brand in Europe, with an openness and positive approach that facilitates a stronger, more focused role in the market while supporting our partner’s strengths too.

Since 1931, Bemberg™ is a new material definition for responsible luxury. The one for cool exquisite comfort, whose smart heritage is born in a circular economy. Made by Asahi Kasei, the company is the sole maker of this one-of-a-kind, matchless, high-tech natural material, with a unique and precious touch and feel.

Starting from September 2018, Asahi Kasei has launched the Bemberg™ brand in Europe, with an openness and positive approach that facilitates a stronger, more focused role in the market while supporting our partner’s strengths too.

Source:

GB Network Marketing & Communication

Fast Concept - Paper leather jacket, by Prof Kay Politowicz and Dr Kate Goldsworthy UAL (c) RISE AB
Fast Concept - Paper leather jacket, by Prof Kay Politowicz and Dr Kate Goldsworthy UAL
23.11.2018

New research pushing the limits for ‘fast’ and ‘slow’ fashion towards a sustainable, circular future

  • conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

  • conceptual and commercial garments presented at exhibition in London

After two years of research Mistra Future Fashion is honoured to present, in collaboration with Centre for Circular Design at University of the Arts London and Filippa K, an exhibition pushing the limits of ‘fast’ and ‘slow’ fashion. Started in 2017, the industry-embedded project Circular Design Speeds takes a unique systemic approach, showcasing what could be accomplished using existing value chains as well as what the future of sustainable fashion holds. Ground-breaking textile research from University of the Arts London is questioning normative use and design of garments in creating prototypes to be worn across a spectrum of 24 hours to 50 years. By implementing research into existing value chains, Filippa K have produced a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The research results and garments will be presented at the launch event at the University of the Arts London, on November 23rd and open to public on the 24th and 25th of November.

On Friday November 23rd the exhibition Disrupting Patterns: Designing for Circular Speeds opens up at University of the Arts London. The exhibition is the results of a two-year research project called Circular Design Speeds aiming at pushing the limits of ‘fast’ and ‘slow’ fashion by testing new concepts for sustainable design in an industry setting. On display are exploratory prototypes, as well as commercial garments produced by industry partner Filippa K using existing value chains. In addition, research results on innovative materials, consumer acceptance, composting studies and Life Cycle Assessments are presented. The aim of this project is to implement research results in a real fashion industry context, focusing on speed of use and maximising fabric value retention in products.

The Service Shirt developed by Professor Rebecca Earley is designed to last for over 50 years. The concept garment explores the multiple complexities, challenges and opportunities associated with design for circular business models in extended use contexts. The Service Shirt was designed as a ‘deliberate extreme’ to have a total lifecycle of 50 years. This lifecycle includes in-house and external remanufacturing processes, as well as various use cycles – often moving between single ownership and rental and sharing contexts. It becomes the lining for a jacket and then crafted in to fashion accessories, before finally being chemically regenerated in the year 2068.

On the opposite side of the spectrum the Fast-Forward concept, developed by Prof Kay Politowicz and Dr Kate Goldsworthy, explores alternative modes of production and use for a sustainable ‘fast-fashion’ application. Advantages with regards to climate impact are enabled through lighter material choices, nonwoven fabric production, no launder, clear routes to recovery and redistributed manufacturing systems. A sliding scale of ‘speed’ from ultra-fast forward through to a more widely accepted length of use, with adaptations to production processes and end of life, is presented. The prototypes are made from a new bio-based nonwoven material co-developed with Dr Hjalmar Granberg at RISE Research Institute of Sweden & University of the Arts London. The composition of the paper is a mix of cellulose pulp and bio-based PLA fibre, making the garment 100% biodegradable or recyclable in existing paper recycling systems.

Working closely with industry partner Filippa K made commercial testing possible. By implementing research into existing value chains, Filippa K was able to produce a coat that is 100% recycled and recyclable, as well as a concept dress that is 100% bio-based and biodegradable. The garments are a part of Filippa K’s Front Runner series and will be available in selected stores on November 26th. With a focus on products’ length of use and maximizing fabric value retention, Filippa K are dedicated to becoming fully circular by 2030.

“Being part of the fashion industry comes with many challenges, especially when considering the fact that we are the second most polluting industry after oil. Our industry needs to change and we believe adapting to circular models, like nature’s ecosystem, is one important solution. We want to be able to offer beautiful clothing and to make business within the planetary boundaries.”
- Elin Larsson, Sustainability Director, Filippa K

To validate the design research presented, a Life Cycle Assessment was performed on the prototypes. Mistra Future Fashion affiliated Dr. Greg Peters, Chalmers University of Technology, together with additional LCA Researchers at RISE, conclude that the production of fibres and fabrics are the main processes impacting the environment during the garment life cycles. Therefore, to extend the lifetime of existing garments and design for re-use, as done in the Service Shirt, is indeed the superior alternative compared to a reference garment.

“Compared with garments of the same mass, the extended life garments represent a large improvement in environmental performance over the reference garments, outperforming the reference garments in all effect categories. This superiority is primarily a consequence of avoiding garment production via reprinting and reassembly of the initial garment to extend its useful life.”
- Dr Greg Peters, LCA Researcher at Chalmers University of Technology

Another way to circumvent the impacts of fast fashion is to develop materials with considerably lower impacts during production, and which also avoid the barriers to recycling faced by conventional garments. Instead of hinder consumers from buying new, the act of acquiring a new garment could in fact be sustainable. The paper-based short life garments considered in this assessment show considerable impact savings when compare to the benchmark garment. Dr. Peters says,

“The paper-based garments benefit from the lower impacts of the material (fibre production, spinning and knitting) compared with conventional cotton, from their relatively light weight and also on account of the lower impacts in garment production and use.”

(c) TRSA
08.11.2018

Hospitality Expert to Headline TRSA’s Inaugural Hospitality Conference

Feb. 2019 Event Targets Laundry Execs, Upper Management Teams Serving Hospitality and Hotel Lodging Markets

Anthony Melchiorri, the renowned hospitality expert, creator and host of The Travel Channel shows Hotel Impossible, Hotel Impossible: Five Star Secrets and Hotel Impossible: Showdown once thought of opening his own hotel laundry when he was fresh out of the Air Force and entering the hospitality industry. Attendees at TRSA’s inaugural Hospitality Conference, Feb. 20-21, 2019, will hear about that and more when Melchiorri delivers the keynote address at the Walt Disney World’s Coronado Springs Resort in Lake Buena Vista, FL. Melchiorri’s 20 years of hospitality industry experience and resultant successes has provided a wealth of insights and actionable steps that he will share during his presentation, How to Build Your Personal Brand.

Feb. 2019 Event Targets Laundry Execs, Upper Management Teams Serving Hospitality and Hotel Lodging Markets

Anthony Melchiorri, the renowned hospitality expert, creator and host of The Travel Channel shows Hotel Impossible, Hotel Impossible: Five Star Secrets and Hotel Impossible: Showdown once thought of opening his own hotel laundry when he was fresh out of the Air Force and entering the hospitality industry. Attendees at TRSA’s inaugural Hospitality Conference, Feb. 20-21, 2019, will hear about that and more when Melchiorri delivers the keynote address at the Walt Disney World’s Coronado Springs Resort in Lake Buena Vista, FL. Melchiorri’s 20 years of hospitality industry experience and resultant successes has provided a wealth of insights and actionable steps that he will share during his presentation, How to Build Your Personal Brand.

TRSA has added the Hospitality Conference to its growing professional-development opportunities in response to member requests for enrichment specific to this rapidly-growing market. Attendees for this event, which is targeted to laundry executives and their upper management teams who serve the hospitality and hotel lodging markets, will benefit from opportunities to build skills, learn best practices from industry leaders and spend time collaborating and sharing information. Agenda highlights include these general session topics:

  • Contracting with Group Purchasing Organizations (GPOs)
  • Hospitality Market Research
  • Understanding Hospitality Textiles

Panel discussions pay professional growth dividends in the form of networking and information-sharing. The TRSA Hospitality Conference’s agenda includes these interactive opportunities:

  • CEO Panel: Hospitality Market Trends
  • Customer Perspectives: Benefits and Challenges of In-House (OPLs) and Outsourcings
  • Making the Case for Outsourcing Laundry Services and Closing In-House or On-Premise Laundries (OPLs)

Day two of the agenda will consist of tours at these state-of-the art central Florida plants: Walt Disney World Textile Services Resort Linen Plant and Hotelier Linen Service. Following the plant tours, management teams will offer debriefing sessions that allow for comparison of operations, thereby enriching the discussion of alternative approaches to similar tasks among conference attendees.

Early-bird registration pricing for this event is open now through Jan. 11, 2019. An additional 10% off registration for three or more who register from the same company is also available. Visit www.trsa.org/hospitality for additional information. The full TRSA professional development calendar for 2019 can be viewed at www.trsa.org/calendar.

 

More information:
TRSA TRSA Conference
Source:

TRSA

28.08.2018

480 international exhibitors ready for Cinte Techtextil 2018

Cinte Techtextil China opens its doors next week, with around 480 exhibitors from 22 countries and regions preparing for another successful showcase of the world’s leading textile innovations. Leading international and domestic brands will feature in halls N1 – N3 at Shanghai New International Expo Centre from 4 – 6 September, making Cinte Techtextil the ideal place to make connections and gain insight into Chinese and Asian market trends.

The technical textile industry in the Asia region, and China in particular, has been growing steadily and is predicted to continue doing so. China’s total output of technical textiles and nonwoven products is estimated to account for 30% of global production by 2020, and double that of 2013. This high potential for growth, achieved through investments worth billions of dollars, has drawn attention from European exhibitors, who are set to travel to the region for Cinte Techtextil.

Cinte Techtextil China opens its doors next week, with around 480 exhibitors from 22 countries and regions preparing for another successful showcase of the world’s leading textile innovations. Leading international and domestic brands will feature in halls N1 – N3 at Shanghai New International Expo Centre from 4 – 6 September, making Cinte Techtextil the ideal place to make connections and gain insight into Chinese and Asian market trends.

The technical textile industry in the Asia region, and China in particular, has been growing steadily and is predicted to continue doing so. China’s total output of technical textiles and nonwoven products is estimated to account for 30% of global production by 2020, and double that of 2013. This high potential for growth, achieved through investments worth billions of dollars, has drawn attention from European exhibitors, who are set to travel to the region for Cinte Techtextil.

This year’s European Zone will feature around 30 exhibitors from countries including Austria, France, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, Germany and Italy. In addition to this, the Czech Republic will present its debut pavilion, showcasing exhibitors with solutions for technical yarn, fabric processing and nonwoven fabrics.

In addition to this, exhibitors from 12 more countries and regions will present their latest innovations to the market. These include domestic and international exhibitors from China, Hong Kong, India, Indonesia, Israel, Japan, Korea, Saudi Arabia, Taiwan, Thailand, Turkey and the US.

Belt and Road: a success story for Buildtech
Following higher regulations and quality standards that aim to exceed Western levels, demand is high in China for production machinery. What’s more, with the national nonwovens market displaying particularly fast growth, Cinte Techtextil has attracted some of the world’s leading nonwoven and weaving machinery brands.

The fair will showcase leading global exhibitors across 12 application areas. Two areas to watch out for include Buildtech and Mobiltech, which are both performing well in Asia and specifically in China. The Belt and Road initiative brings Buildtech a great deal of benefits through China’s enormous investments in global infrastructure. Adding to this, China’s automobile production has been increasing 3% year-on-year, with particularly high growth seen in new-energy vehicles, SUVs and commercial vehicles. China has become the world’s largest auto producer, and this has been boosting progress in the Mobiltech category.

Cinte Techtextil fringe programme a hub of industry insight
A comprehensive fringe programme will keep Cinte Techtextil fairgoers up to date with industry news, with standout events including the 7th China International Nonwovens Conference. Focusing on the global nonwovens industry, topic highlights include the latest innovations in China’s nonwovens industry, an insight into the North American nonwovens market, future trends in the global hygiene product market, and more. The conference will also discuss innovations and developments in filter materials and the wipe industry.

The first day of the fringe programme will see a panel discussion in hall N1, moderated by the Taiwan Technical Textiles Association (TTTA), with confirmed panellists including DuPont, IBENA Textilwerke and SGS-CSTC Standards Technical Services. The panel will focus on current trends, developments and standards in the protective textile industry.

Other fringe programme events will include seminars and product presentations led by industry leaders on the latest global technologies and market trends, and an Innovation Showcase Area in a variety of application categories. 

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd

27.08.2018

Intertextile Shanghai Home Textiles: Home textile industry represented by around 1,040 exhibitors and a diverse fringe programme this August

The Autumn Edition of Intertextile Shanghai Home Textiles will open today, returning as a major event for big-name players in the domestic and international home textile industry. Covering six halls, it will accommodate around 1,040 suppliers from around 30 countries & regions. With 40,000 visitors expected to attend, including import & export corporations, wholesalers, distributors, chain stores and home product manufacturers, the fair is anticipated to be an ideal platform for suppliers to introduce new products to the market.

The Autumn Edition of Intertextile Shanghai Home Textiles will open today, returning as a major event for big-name players in the domestic and international home textile industry. Covering six halls, it will accommodate around 1,040 suppliers from around 30 countries & regions. With 40,000 visitors expected to attend, including import & export corporations, wholesalers, distributors, chain stores and home product manufacturers, the fair is anticipated to be an ideal platform for suppliers to introduce new products to the market.

Suppliers set to seize market shares in China’s revitalised home textile market
China’s home textile market has been growing steadily, with both domestic and overseas suppliers determined to take advantage of Intertextile Shanghai as a platform to gain market share. This year, premium editors from China, including Beijing Xinyada, Beijing Euroart, Jasonite, SATI and Hangzhou Antex, will be showcasing their high-end collections while international contract business suppliers, such as JAB Anstoetz and Morphrow, are also present to cater to the growing demand for their quality products.
In addition to a majority of local brands and four domestic pavilions from Shaoxing, Tongxiang, Haining and Yuhang regions, there will also be international country & region pavilions from Belgium, India, Pakistan, Taiwan and Turkey, showcasing their specialised products.

Around 1,040 exhibitors covering every home textile sourcing need
Growing middle and upper classes in China have seen consumers’ buying trends expand to buying combinations of items with particular design trends. Matching this trend, a number of whole home exhibitors that provide one-stop services, from selecting home textile products to giving home decoration ideas, have been reaping the benefits in recent editions of Intertextile Shanghai Home Textiles – and 2018 is set to continue reflecting this trend.

Around 1,040 exhibitors at Intertextile Shanghai Home Textiles will showcase a wide variety of home textile products, including bedding, bath, table & kitchen, curtains & upholstery, textile designs & technology, whole home, sun protection, wall coverings and carpets & rugs. This diverse range of offerings establishes the reason why Intertextile Shanghai attracts genuine, high-quality buyers – across the spectrum, there’s something for every buyer at this fair.  

Fringe programme events to provide insight and inspiration
Intertextile Shanghai Home Textiles aims to provide inspiration for the next season at the same time as providing a platform for business interactions. At this edition’s fringe programme, key events include the InterDesign – Trend Area, displaying three key trend themes for A/W19 in collaboration with the international trendsetter NellyRodiTM Agency. Trend tours and forums will also take place, giving visitors the opportunity to learn and discuss lifestyle trends with designers and trend experts.

At Contract Business 360o, the fair will feature a showcase area at hall 5.1 displaying quality contract upholstery from leading exhibitors, and seminars on current design and market insights of the contract business sector. Catering to popular demand is the return of the Digital Printing Micro Factory, demonstrating a complete production process onsite, alongside forums on the benefits of digital printing & latest production technics. The Andrew Martin International Interior Design Summit will see a forum of experts share their design insights in the new information era, whilst the 2018 Home Furnishing Crossover Exhibition will demonstrate design talent and creativity of interior designers, and present new home living styles.

The show will be held from 27 – 30 August in the National Exhibition and Convention Center in Shanghai. Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

© Techtextil, Messe Frankfurt Exhibition GmbH
06.08.2018

Strong potential in Buildtech and Mobiltech sectors to be displayed at Cinte Techtextil China

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

With a huge boom in national and regional infrastructure projects, the market for Buildtech products, especially geotextiles and construction textiles, is rapidly expanding. In particular, the government’s global Belt & Road project, as well as continued investment at home in highways, high-speed rail and more, is fuelling this expansion. According to CNITA, in 2017 China started 35 new railway projects, with additional private capital investment in this sector totalling some USD 53 billion that year. The same investment in highway construction increased 17.7%, while water conservation project investment by private firms reached a new record of USD 105 billion.

With this potential in the Asian market, it’s no surprise a number of new exhibitors will feature in the Buildtech sector at the fair, including FPC Technical Textile from Saudi Arabia, Kobe-cz from the Czech Republic, as well as Lenzing Plastics, while Johns Manville are one of the returning exhibitors this year.

  • FPC Technical Textile (Saudi Arabia) produce high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics, and will focus on the latter at the fair.
  • Kobe-cz (Czech Republic) will showcase their nonwoven fabrics, mainly from glass fibre with temperature resistance up to 800°C.
  • Exhibiting for the first time at the fair with their Plastics division, Lenzing (Austria) will feature their technical laminates for building industries, roofing membranes, vapour barriers, isolation facings and barrier packaging, as well as PROFILEN® PTFE yarns, films and fibres at Cinte Techtextil.
  • Johns Manville’s (US) products on offer include polyester spunbond, PP & PBT meltblown, glass fibre nonwovens, micro glass fibre nonwovens, hybrid nonwovens, glass fibre needle mat and glass microfibers.

Mobiltech benefits from huge increases in automobile production in China

With new textile innovations and application possibilities spreading throughout the automobile industry, coupled with the fact China is the world’s largest auto producer, Cinte Techtextil is the place to see the latest products and technologies for this sector this September. Automobile production in China reached 29 million units in 2017, an increase of 3% year-on-year. Staggeringly, new-energy vehicle production grew by 53% last year, while SUVs and commercial vehicles increased 13.81% and 13.95% respectively.

With such strong growth in China, a number of leading international Mobiltech producers, as well as top domestic suppliers, will be at Cinte Techtextil this year, including:

  • Abifor (Switzerland): their focus at the fair is on products designed for automotive, construction and other technical applications, in particular their specialty hot-melt powders. The company has its own production unit in Shanghai, and reports that an increasing number of domestic customers are starting to focus on more sophisticated products.
  • SKS Group (Sweden): will showcase high performance single end yarn for automotive and industrial hoses, and single end cord for automotive and industrial belts.
  • Swisstulle (Switzerland): will have a range of products on offer for automotive, rail and aviation uses, including sunshade materials, nets, tube reinforcements and new possibilities for luggage compartment covers.
  • Windel Textile Far East (Germany): with production undertaken in China, this German firm offers textile greige, half-done and finished materials. They offer nonwoven, knitted and woven fabrics (substrates), and glass fibre solutions. At the fair, they will showcase substrates for adhesive tapes / wire harnessing tapes, and Maliwatt- and coagulated microfibre fleece for covering vehicle interiors.
  • Protechnic (France): they will feature hot melt thermoadhesive nets, webs and films, as well as laminating process in automotive and other industrial applications at Cinte 2018.
  • Kuangda Technology Group (China): having supplied products for global brands such as Volkswagen and Audi, this Chinese supplier will offer automotive interiors, including interior fabrics, seat covers and cushions at the fair.
  • Shanghai Shenda (ShanghaiTex Group) (China): specialising in automotive interior textiles, they manufacture a full range of products including grey car carpet, moulding car carpet, head liners (warp-knitting and nonwoven), seat belt, seat fabrics and more, and have supplied the likes of Mercedes-Benz, BMW, Volkswagen and GM.

Cinte Techtextil China is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA). To find out more about the fair, please visit: www.techtextilchina.com.

Source:

Messe Frankfurt Exhibition GmbH

26.07.2018

Archroma to present solutions towards innovative and sustainable denim to India industry

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan. Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.

Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process!
Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.

The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

  • Optisul® C, “soft colors” made easy
    With Optisul® C dyes, denim manufacturers can produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors.
    They are suitable for GOTS and bluesign® approval.
  • Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
    Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
    They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles.
  • Diresul® blacks & greys, a cosmos of greys and deep black and navies
    Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

COATING, A WHOLE UNIVERSE OF COLORS AND EFFECTS
Archroma’s dye and chemical specialties portfolio allows to create exciting colors and effects using coating applications, from exclusive sulfur dyes and pigment specialties that help highlighting the indigo look, to functional finishes that give performance to denim garments - using water-based, formaldehyde-free or ultra-low formaldehyde polymers.

SOLUTION PACKAGES FOR SUSTAINABILITY
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“It is time to make denim in a whole different way; denim that brings together innovation, sustainability and creativity,” says Anjani Prasad, Head of Sales India, Archroma. “Brands around the globe are exploring how to make fashion in a cleaner and safer way, and Archroma has the solutions to do just that, to create denim with a soul.”
Visit Archroma at DenimsandJeans India 2018 at t at Hotel Lalit, Bangalore, India, on August 1 & 2, 2018.
* Below limits of detection

(1) Arjen Y. Hoekstra, The Water Footprint of Modern Consumer Society
(2) American Chemical Society, www.sciencedaily.com/releases/2012/06/120619123753.htm.
Denisol®, Optisul®, Diresul® are trademarks of Archroma registered in many countries.
© 2018 Archroma

More information:
Archroma
Source:

Archroma

16.07.2018

Leading nonwovens & weaving machinery brands sign up for Cinte Techtextil China

Asia’s largest biennial event for the entire technical textiles and nonwovens sector will feature some of the industry’s biggest overseas machinery brands. Held on the earlier date of 4 – 6 September this year, the fair will feature an expected 500-plus total exhibitors from around 20 countries & regions.

As the world’s largest producer of technical textiles and nonwovens, China’s demand for production machinery is insatiable. As such, this September’s Cinte Techtextil China has attracted some of the world’s leading machinery brands, particularly in the nonwovens and sewing machinery sectors, ensuring a wide range of sourcing options for both domestic and international buyers.

Asia’s largest biennial event for the entire technical textiles and nonwovens sector will feature some of the industry’s biggest overseas machinery brands. Held on the earlier date of 4 – 6 September this year, the fair will feature an expected 500-plus total exhibitors from around 20 countries & regions.

As the world’s largest producer of technical textiles and nonwovens, China’s demand for production machinery is insatiable. As such, this September’s Cinte Techtextil China has attracted some of the world’s leading machinery brands, particularly in the nonwovens and sewing machinery sectors, ensuring a wide range of sourcing options for both domestic and international buyers.

Overseas producers respond to strong Chinese demand
As the Chinese domestic and export markets’ demand for quality technical textiles and nonwovens products continues to increase, overseas machinery brands continue to enter the country, using Cinte Techtextil China as their starting-out platform. ANDRITZ Nonwoven is just one of those who see the growing potential. “Chinese nonwovens manufacturers are increasingly requiring higher capacities and top-class quality for their nonwovens products for local and export markets,” Mr Laurent Jallat explained. “China is the biggest market in terms of installed capacity, and shows quite promising potential for the future. In the past years, we’ve seen rapid growth in products such as disposable face masks.” ANDRITZ responds to this demand with their neXline spunlace eXcelle line which features state-of-the-art TT card web forming and JetlaceEssentiel hydro entanglement units for high capacity and speed.

The DiloGroup also report an increase in demand for their products in China. “China is one of our biggest markets,” explains Mr Dominik Foshag. “We have procured huge orders from China, as Chinese customers are considering German technology more frequently nowadays. The visitor quality of Cinte Techtextil has been very good in this past, and we think this year’s fair will be also successful as we know many of our customers are going to visit.”

Oerlikon will introduce its spunbond technology to the Chinese market this year, and is expecting to conclude initial contracts at the fair due to increased demand for overseas products. “The Chinese market for nonwovens products is by far the largest and fastest growing national market. Chinese manufacturers are no longer satisfied with lower product quality, but want to exceed Western quality levels, for example. The products must now meet stricter customer requirements and legal standards, some of which are significantly higher than other international standards,” Ms Lena Kachelmaier said.

Truetzschler Nonwovens has also noticed this trend. Ms Jutta Stehr commented: “In the last two or three years, China became one of the pacemakers in the field of nonwovens used in beauty, skin care and hygiene applications. Asian markets have set new standards concerning quality in nonwovens. For instance, making disposable wipes from cotton fibres is a trend originating in Asia. The luxurious feeling of cotton combined with the requirement for eco-friendly products will further drive demand in China and elsewhere. Accordingly, Truetzschler Nonwovens anticipates more inquiries at Cinte Techtextil for its proven carding and spunlacing solutions for cotton nonwovens.”

Weaving machine supplier Itema has also noticed strong demand in China for products made in Italy. “Generally speaking, and especially for technical fabrics, imported machinery is highly evaluated and appreciated by Chinese customers. In recent years, Itema experienced significant growth in the sale of its Made-in-Italy weaving machines in China, and in other APAC countries. Imported machines are synonymous with quality and reliability, and we believe this positive trend will be constant in the future,” Mr Matteo De Micheli outlined.

Weaving machinery exhibitor highlights

  • ANDRITZ Nonwoven: their specialty is technologies for drylaid, wetlaid, spunbond, spunlace, needlepunch and textile calendering. At Cinte Techtextil, they will highlight their aXcess product portfolio, which has been especially designed for medium-capacity production. ANDRITZ has developed this range to fit the demands of producers with medium-capacity requirements, particularly in emerging markets. It includes lines and individual machines for needlepunch, spunlace, wetlaid and calendering processes.
  • Autefa Solutions: visitors to their booth will experience the company’s expertise as a full line supplier for carded- crosslapped needlepunch lines, aerodynamic web forming technology, spunlace and thermobonding lines. Their nonwovens lines meet customers’ requirements for quality web formation, bonding, active weight regulation and minimal maintenance.
  • DILO Systems: a leader in the field of staple fibre nonwoven production lines, DiloGroup will present their latest developments at the fair, including staple fibre production lines, card feeding and cards and crosslappers & needlelooms.
  • Oerlikon: they will showcase spunbond solution lines for the production of polypropylene geotextiles. According to the company, spunbond geotextile applications are on the rise as the market is increasingly demanding more efficient processes and products, which means the product requirements are often the same or greater, but with a lower raw material input. Spunbonds are progressively replacing classical carded nonwovens due to their technical and commercial benefits.
  • Truetzschler Nonwovens: concentrating on solutions for producing a broad range of hygiene nonwovens including wipes at the fair, they will focus on thermobonding & spunlacing processes and the respective machinery, from fibre preparation down to winding.

Sewing machinery exhibitor highlights

  • Itema: making their debut at Cinte Techtextil, they are a leading supplier of weaving machines for technical fabrics production. According to the company, they are the only weaving machine producer to offer technical textile manufacturers the top three technologies for weft insertion: Rapier, Projectile and Airjet.
  • Picanol: they use their leading position as producers of weaving machines for other textile products to expand into machines for woven technical textiles by investing heavily in state-of-the-art technology, as well through the modular design of their machine platforms which allow them to serve different industry sectors effectively.
  • Lindauer Dornier: featuring in the German Pavilion this edition, they offer a number of weaving machine varieties including rapier, air-jet, open reed weave (ORW) and more. Their rapier weaving machines have set the technological standard in the high quality wool textiles market for decades, and this quality will be on display at their booth with the DORNIER P1 rapier weaving machine.

Domestic brands to watch out for

In addition to these leading overseas brands, a strong line-up of Chinese machinery producers will also feature at the fair, including Changshu Weicheng Non-Woven Equipment and Shijiazhuang Textile Machinery.

 

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd

Photo: (c) Premium Group Berlin
09.07.2018

The Art of connecting the fashion industry

"The atmosphere at all four shows and also the #FASHIONTECH BERLIN Conference was more successful than last summer. The exhibitors repeatedly praised the range of visitors – international buyers, well-founded fashion experts, people that love experiencing new trends and with a high level of awareness for our beautiful world. All of them took the chance to exchange and get inspired by the shows and events. Our strength is the concept of creating content, commerce and community – we connect the right people at the right time and at the right touchpoints. The entire network benefits from that. Furthermore the new digital b2b platform veee.com was featured on the PREMIUM and SEEK and received a very positive feedback."
– Anita Tillmann, Managing Partner PREMIUM GROUP

"The atmosphere at all four shows and also the #FASHIONTECH BERLIN Conference was more successful than last summer. The exhibitors repeatedly praised the range of visitors – international buyers, well-founded fashion experts, people that love experiencing new trends and with a high level of awareness for our beautiful world. All of them took the chance to exchange and get inspired by the shows and events. Our strength is the concept of creating content, commerce and community – we connect the right people at the right time and at the right touchpoints. The entire network benefits from that. Furthermore the new digital b2b platform veee.com was featured on the PREMIUM and SEEK and received a very positive feedback."
– Anita Tillmann, Managing Partner PREMIUM GROUP

On three days the PREMIUM GROUP once again showed and linked the most important international brands with buyers, influencers and other media representatives. Outcome: The real face-to-face exchange 2.0 is and remains important.
 
A total of 1,038 brands exhibited on the four formats. On top the #FASHIONTECH BERLIN offered the group's extensive and varied program as a conference. In addition to networking and trend scouting, the main focus was also on points of experience – an important aspect for the fashion industry, to which the PREMIUM GROUP increasingly relies. The halls of STATION Berlin, the Kühlhaus and the Arena Berlin were filled accordingly throughout the three days. The terrific summer weather contributed to the constantly positive atmosphere and invited all guests to enjoy all outdoor offers.

 

Source:

Premium Group Berlin

coldblack®: Schoeller + Südwolle Group (c) Schoeller Textil AG
16.06.2018

coldblack®: Schoeller cooperates with Südwolle Group

OutDoor2018: Schoeller’s coldblack® technology has been specifically optimized for use on knitted and woven fabrics so brands can now expand their product application uses. Under the blazing sun, textiles with coldblack® heat up less and stay cool to the touch. Südwolle Group, a leading manufacturer of high quality yarns, has also recognized the ideal combination of merino and coldblack®. With this, the wear comfort of wool apparel can be tangibly improved.

Wool is well known for its various property benefits, including insulation, natural antibacterial protection, odor control, light weight and nearly wrinkle free composition. Not only in the winter time, but also in summer particularly merino wool, a special high-quality type of wool, regulates moisture balance and thus the body temperature. The fibers can absorb a great deal of moisture or sweat and transport it away from the body. Warm ambient air quickly dries the material and causes a cooling evaporation, which makes it very comfortable to wear merino apparel in the summer time.

OutDoor2018: Schoeller’s coldblack® technology has been specifically optimized for use on knitted and woven fabrics so brands can now expand their product application uses. Under the blazing sun, textiles with coldblack® heat up less and stay cool to the touch. Südwolle Group, a leading manufacturer of high quality yarns, has also recognized the ideal combination of merino and coldblack®. With this, the wear comfort of wool apparel can be tangibly improved.

Wool is well known for its various property benefits, including insulation, natural antibacterial protection, odor control, light weight and nearly wrinkle free composition. Not only in the winter time, but also in summer particularly merino wool, a special high-quality type of wool, regulates moisture balance and thus the body temperature. The fibers can absorb a great deal of moisture or sweat and transport it away from the body. Warm ambient air quickly dries the material and causes a cooling evaporation, which makes it very comfortable to wear merino apparel in the summer time.

coldblack® technology from Schoeller supports the natural properties of wool because it reliably reduces heat build-up when exposed to the sun. Together with the help of Südwolle Group, the finish has been optimized specifically for the use in merino apparel. The yarn manufacturer chooses coldblack® for a variety of uses, especially for knitting and weaving yarns for sports and outdoor apparel and develops such products individually according to its customers’ requirements.

Stéphane Thouvay, Managing Director Product Management & Innovation at Südwolle Group, summarizes the use of the technology as follows: “coldblack® is part of our product range for the summer time, which we will be presenting at OutDoor show in Friedrichshafen. The technology reduces not only heat build-up, but also enhances the natural UV protection of wool without affecting the look and feel of the fabric. Therefore coldblack® perfectly fits into our yarn selection for sports and outdoor apparel, for example in our collection ʻYarn in Motion’. For end consumers garments made of coldblack® yarns can optionally be labeled with hangtags.”

When used in high-quality woolen fabrics, coldblack® has already proven its performance and is being used by renowned brands in various collections of men’s suits. Since 2008, the technology has been licensed by more than 200 brands, in sports particularly in the field of cycling, triathlon and golf. All components of the finish are bluesign® approved.

Source:

Schoeller Textil AG

02.05.2018

Demand for European technical textiles attracts leading companies to Cinte Techtextil China

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

“In the Chinese market, buyers want good quality products, so overseas companies, and products with recognised quality certifications, have a lot of potential,” Ms Ping Chen, General Manager of IBENA Shanghai Technical Textiles commented. “As a leading German company in the industry, our products are welcomed by many buyers at this fair. It is also important to be in the German Pavilion as this signals to buyers that we have quality products, and it attracts more attention.” Swiss firm Sanitized AG had the same experience. “As a Swiss company in the European Zone I believe it’s an advantage, as some local buyers have more confidence towards imported products,” Mr Steven Liu, Sales Manager said.

Other exhibitors commented on the long-term trends in the Chinese market. “There’s a definite shift to more high-quality machinery in China that isn’t affected by what’s happening in the overall economy. Moreover, there are opportunities for overseas suppliers as there is still a gap between us and what Chinese companies produce,” Dr Joachim Binnig, Vice President, Head of Development & Technology, Autefa Solutions Germany GmbH explained.

Mr Roger Zhang, Sales Manager for German firm J.H. Ziegler Nonwovens and New Materials commented: “Our products are mainly for high-end Chinese customers, such as BMW and Audi. The Chinese market has gradually matured, but the production capability for high-performance products which are energy efficient and eco-friendly is still developing, so there is a lot of space for overseas brands to develop here.”

European Zone highlights
This year’s European Zone will feature around 30 exhibitors from eight countries, including Austria, Belgium, the Czech Republic, France, Italy, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, the Czech Republic, Germany and Italy. Some of the exhibitor highlights in the European Zone include:

  • Arkema (France): with brands including PMMA Altuglas, Rilsan, Pebax, Kynar PVDF and Bostik, they will present polymer resin for fibres and yarns, which apply to a wide range of applications, at the fair.
  • Dakota Coating (Belgium): specialists in thermoplastic and thermosetting adhesives, their polymer products, based on polyethylene, polyolefin or mixtures, ethylene vinyl acetates, co-polyamides, polyurethanes and co-polyesters, are suitable for automotive, building, heat transfer and sound insulation uses.
  • Lenzing Plastics (Austria): a new exhibitor at the fair, they are a leading manufacturer of polyolefin and fluoropolymer products, such as Thermoplast and PTFE products. One of their core competencies lies in the monoaxial stretching of films and filaments, and they offer special solutions in the fields of construction & insulation, medicine & hygiene, packaging and cables, as well as automotive and technical textiles. They will highlight their PROFILEN® PTFE product at the fair, and with its extreme durability and very smooth surface, it is highly valued in many niche applications in the technical and medical sectors.
  • Protechnic (France): leading manufacturers of hot-melt adhesives and plastic printed films, they will showcase hot melt thermo-adhesive nets, webs and films at the fair.
  • Trelleborg Coated Systems (Italy): another new exhibitor this edition, they produce high-performance, engineered coated fabrics. They offer a wide variety of substrates – from Kevlar® to silk – with a choice of weaving methods.
09.04.2018

Heimtextil India and Ambiente India 2018 launch Bespoke Living in their fifth edition

  • Special display arena will showcase exquisite signature collections from interior décor and home textile sectors

India’s premium fairs for home textiles, homeware and interior décor, Heimtextil India and Ambiente India have launched Bespoke Living, an exclusive product showcase space dedicated to companies dealing with signature collections at Pragati Maidan, New Delhi from 27th – 29th June 2018.

With four successful editions in a row, Heimtextil India and Ambiente India also slated on the same dates, have become the country’s leading business trade fairs to showcase the finest quality of dining, living, giving and home textiles. The launch of Bespoke Living aims to highlight one of a kind brands who deal with uniquely crafted designs that will range from plush statement pieces to extensive signature collections for home and retail furnishing.

  • Special display arena will showcase exquisite signature collections from interior décor and home textile sectors

India’s premium fairs for home textiles, homeware and interior décor, Heimtextil India and Ambiente India have launched Bespoke Living, an exclusive product showcase space dedicated to companies dealing with signature collections at Pragati Maidan, New Delhi from 27th – 29th June 2018.

With four successful editions in a row, Heimtextil India and Ambiente India also slated on the same dates, have become the country’s leading business trade fairs to showcase the finest quality of dining, living, giving and home textiles. The launch of Bespoke Living aims to highlight one of a kind brands who deal with uniquely crafted designs that will range from plush statement pieces to extensive signature collections for home and retail furnishing.

The term luxury décor is not restricted to brand names anymore. With trends like fully furnished luxury houses, theme dominated homes and tastefully designed retail showrooms rapidly picking up in the country, consumers are open to different styles and unique designs.
Be it the very popular Scandinavian themed houses to colourful cultural artefacts creating a soothing aura, Indians now want their homes and businesses to reflect their personal style with statement interiors.

Halls dedicated to Bespoke Living will feature selected designer brands from India and around the world showcasing their premium collections. This product showcase arena will be beneficial for interior designers, architects, hotel buyers, buyers of luxury goods and luxury homes developers. Business visitors can gain knowledge about the upcoming trends, source timeless pieces, build new connections with people sharing the same interest and experience the quality of the products in person. Exposure to best in class products and latest trends presented here will help them create a better home design experience for their clients.

Excelling in statement leather pieces the brand Three Sixty will showcase their latest leather collection that comprises of rugged travel accessories and signature furniture pieces. Inspired by the world’s deserts and explorers who traversed them, the brand designs fully customisable handmade products which are available in beautiful shades of tan, sure to up the sophistication quotient of home and retail interiors.     
        
“Our latest collection at Bespoke Living will showcase our ever evolving tastes and designs. We believe luxury need not be synonymous with breaking open the bank. Traditional Indian craftsmen can craft the most beautiful signature pieces and provide quality beyond compare, shared Mr Vikash Gupta, CEO, Three Sixty. International exhibitors present at the show will showcase exquisite artefacts like decorative ceramics with glaze, handmade clay wreaths with metal leaves, ceramic vases and other decorative items to make every home unique.

Apart from this specially curated design platform, Heimtextil India and Ambiente India 2018 will host the Interior Lifestyle Awards that will bring creative masters from the interior decor and home textile sectors together by recognising their art and giving them an international platform to showcase their designs.
The trade fair will also organise the Hospitality Day, a hospitality and retail procurement programme that will bring top class purchase managers from the industry to build new contacts and source quality products. Together, Heimtextil India and Ambiente India together will host over 100 companies from countries like India, Indonesia, Switzerland and Thailand showcasing trendsetting designs in the interior décor and home textile industry.

Source:

Messe Frankfurt

Final Report - Yarn Expo Spring 2018 (c) Messe Frankfurt
23.03.2018

Final Report - Yarn Expo Spring 2018

  • Yarn Expo Spring’s status as Asia’s leading industry event attracts 15% more buyers
  • National Exhibition and Convention Center (Shanghai)
  • Shanghai, China, 14 – 16 March

Yarn Expo continued its evolution into the industry’s most comprehensive and effective business platform with its Spring Edition which concluded last week with a large increase in the buyer figure, as well as another year of growth in the exhibitor number. Strong demand was evident for recent growth areas of the fair such as synthetic, fancy and specialty yarns as well as chemical fibres, while exhibitors in the more traditional cotton product group also fared well. In total, 435 exhibitors from 10 countries & regions took part (2017: 393, 12 countries & regions), attracting 25,966 trade buyers from 88 countries & regions (2017: 22,579, 94 countries & regions).

  • Yarn Expo Spring’s status as Asia’s leading industry event attracts 15% more buyers
  • National Exhibition and Convention Center (Shanghai)
  • Shanghai, China, 14 – 16 March

Yarn Expo continued its evolution into the industry’s most comprehensive and effective business platform with its Spring Edition which concluded last week with a large increase in the buyer figure, as well as another year of growth in the exhibitor number. Strong demand was evident for recent growth areas of the fair such as synthetic, fancy and specialty yarns as well as chemical fibres, while exhibitors in the more traditional cotton product group also fared well. In total, 435 exhibitors from 10 countries & regions took part (2017: 393, 12 countries & regions), attracting 25,966 trade buyers from 88 countries & regions (2017: 22,579, 94 countries & regions).

“Once again, Yarn Expo proved itself as the ideal trade fair for the industry to benefit from changing demands and product trends, especially in the Chinese and wider Asian markets,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd explained. “The fair has evolved in recent editions to have a much bigger focus on synthetic, fancy & specialty yarns and chemical fibres, and based on the exhibitor feedback during the fair, there was an increase in buyers sourcing these products this year. What’s more, local buyers were showing strong interest in the offerings from Southeast Asian countries such as Indonesia and Thailand, while Vietnamese cotton exhibitors reported increased orders from China due to the favourable trade policies between these countries.”

As one of the industry’s leading players, Birla Jingwei Fibres naturally plays a big role at Yarn Expo, with their Birla Planet pavilion proving highly successful for the company. Senior Vice President Mr Sachin Malik, explained: “Yarn Expo is a very important platform for Birla, to be visible to our value chain, to connect with our customers, and our own clients’ customers. We value Yarn Expo as a long-term partner for showcasing our products and connecting with the value chain. Each edition we connect with more and more buyers, and more customers in the industry recognise the importance of this fair. It has developed into a premium event in the global textile industry calendar. Usually this edition is quieter than the autumn fair, but the results this year saw the spring edition reach the same level. Our booth was always packed with buyers, and we also received more high-quality and international buyers. Our pavilion members are also very satisfied with the buyers and their results this time.”

Exhibitor comments

Indonesia

“Yarn Expo is an ideal platform to meet not only Chinese but also global buyers. The fair attracts so many good-quality buyers, and compared to other fairs attracts more of our target buyers. The results this edition have been good. After four years of doing business in China, we’ve found many Chinese customers who are willing to pay for quality. The demand in the China market for high-quality products is growing, in particular because of the shortage of spinning capacity which is made up for by imports. We’ve seen more serious and meaningful buyers that have strong desire for further cooperation this time, and I think the potential of this market will continue to grow.” Mr Anupam Agrawal, Director Spun Yarn Business, PT. Indo-Rama Synthetics Tbk

Korea

“Our booth was so crowded throughout the fair. We had more than 300 buyers visit us, and I guess approximately 30% of them will turn into business after the fair. Our target buyers are fabric and garment manufacturers, and we found a lot of good quality ones here. A wide range of worldwide buyers from different market sectors sourced at our booth, especially big-brand sportswear manufacturers and sourcing offices. We’ve had visitors from China, Europe and many other countries. We are very satisfied with our first Yarn Expo experience, and we expect a very good outcome after the show.” Mr Joo Son, International Sales Team, HJLite

Pakistan

“Yarn Expo is the global meeting platform for all yarn industry players. You have buyers from all over the world here, so it is the best trade platform in Asia to connect with worldwide buyers. We’ve met people from Argentina, Columbia, Korea, Indonesia, the UK and the US. Around 40% of them are new to us. We’ve noticed that everyone is looking for new products nowadays, so we always bring new items. Fancy yarn is getting more common in China, and demand is growing steadily. China is definitely a huge market for us to develop.” Mr Mohammad Saad, Director of Abtex Intl Ltd

India

“Yarn Expo is really helpful in that it has a diverse buyer profile and attracts buyers from around the world. We managed to talk to customers from Pakistan, India and Colombia, as well as potential Chinese buyers who are very interested in our products. The buyers have been genuine with specific sourcing needs, and some of them have already placed orders.” Mr N. Sarawgi, Representative of Madhusudan Rayons Pvt. Ltd

Thailand

“This edition we brought our new Kapok material to the fair for the first time. It has been the most popular product at our booth. In recent editions, we’ve also met more and more garment factories asking for customised fancy yarn to make their products competitive and unique, while eco-friendly and natural yarns are also more popular. Yarn Expo is the platform we announce our new products and technologies, and the feedback from buyers from around the world can help us improve them and learn the latest market trends. The fair is of great value for our market strategy.” Mr Warakorn Bunkanokwong, Export Sales Manager, Kongkiat Textile Co Ltd

Singapore

“We are here to explore the China market, but are also glad more customers from Europe and America visited our booth. Many of the buyers here are at the decision-making level, so can give us clear requirements and advice about our products. This is a highly effective fair to meet Chinese buyers to learn first-hand what the market needs.” Mr Rahul Gupta, Marketing Manager, Texvista Intl Pte Ltd

Vietnam

“Yarn Expo is a great chance to meet our existing partners and find new buyers. Compared to China cotton yarn, we still have an advantage in price and quality which attracts a lot of buyers to our booth. Yarn Expo provides us with a quick way to tap into the Chinese and Asian markets.” Mr Du Xuan Cuu, Trade Director, Hanam Textile Co

Uzbekistan

“The Chinese market is important to us, so we chose to exhibit in Yarn Expo. We have met many buyers here, and each year we can find new customers through Yarn Expo. The international nature of this fair is also beneficial for our business.” Mr Dilshod, Export Manager, Exoeast Trade LLP

China

“Yarn Expo is the largest platform in Asia. Compared to other fairs, the buyers here are of higher quality; genuine buyers make up a large portion and most of them come with sourcing intentions. Currently, fancy yarn is in great demand in the market. The number of customers looking for such products is significantly higher this year, and Yarn Expo can effectively help us capture this demand.”
Ms Stella Gan, Sales Manager, Jin Dun Textile

Buyer comments

“We can find all ranges of cotton yarn, fancy yarn and chemical fibres at Yarn Expo. Most of the famous brands are here, and they bring the latest technologies and products, including debut products. Yarn Expo always catches the latest trends in the industry and presents them at the fair. This year the quantity and quality of fancy yarn exhibitors has increased, so I’ve found some products to source already.” Mr Wang Gaofeng, Deputy General Manager, Jiaxing Jinqie Fashion Co Ltd, China

“We mainly came to source fancy yarn this time, and we found many new options. This international show greatly expands our sourcing options. Many of our existing suppliers, including from Indonesia, exhibit at this fair so that’s why we source here. We’re satisfied with the exhibitor quality, and intend to place orders afterwards. There have been a number of new technologies presented here that left a deep impression on us.” Ms Linggar Jati Halim, Director, PT. Kartika Sinar Mulia, Indonesia

“I like this fair as it gathers exhibitors from the entire industry supply chain. As the demand for functional fabrics continues to increase, we can also see this trend in Yarn Expo. Therefore, the fair helps us to learn about the industry’s developments.” Mr Jiang Chang, Marketing Manager, Hangzhou Gaoxi Technology Co Ltd, China

The next Yarn Expo fair, the Autumn Edition, will be held at the earlier date of 27 – 29 September 2018, once again at the National Exhibition and Convention Center. 

Intertextile Shanghai Home Textiles – Autumn Edition 2018 (c) 'Messe Frankfurt / Intertextile Shanghai Home Textiles'
07.03.2018

Intertextile Shanghai Home Textiles – Autumn Edition 2018

August’s Intertextile Shanghai Home Textiles embraces the revitalised home textile market in China
As China’s economy is getting back on track with the GDP growth rate standing at 6.9% in 2017, the home textile market is also showing strong signs of recovery before Intertextile Shanghai Home Textiles returns this August.

With 23 years’ history, the show is well regarded as the most influential home textile trade fair in Asia. Over 1,000 suppliers from around 30 countries and regions will showcase a wide variety of home textile products ranging from bedding, bath, table & kitchen, curtains & upholstery and textile designs & technology to editors, whole home, sun protection, wallcoverings and carpets & rugs. In turn, over 38,000 trade buyers are expected to source at the fair.

August’s Intertextile Shanghai Home Textiles embraces the revitalised home textile market in China
As China’s economy is getting back on track with the GDP growth rate standing at 6.9% in 2017, the home textile market is also showing strong signs of recovery before Intertextile Shanghai Home Textiles returns this August.

With 23 years’ history, the show is well regarded as the most influential home textile trade fair in Asia. Over 1,000 suppliers from around 30 countries and regions will showcase a wide variety of home textile products ranging from bedding, bath, table & kitchen, curtains & upholstery and textile designs & technology to editors, whole home, sun protection, wallcoverings and carpets & rugs. In turn, over 38,000 trade buyers are expected to source at the fair.

According to Askci Consulting, one of the leading Chinese industry research institutions, China’s home textile market has been growing steadily with an average rate of around 10% between 2010 and 2015. The overall size has increased from USD 18.4 billion in 2010 to USD 29.5 billion in 2015, and is expected to reach USD 38.3 billion in 2020. What’s more, the consumption of home textiles only accounts for about 29% of the total textile consumption of the country. Given the fact that the relevant ratio in developed countries such as the US and Japan is between 33 to 38%, there still lies huge room for the Chinese market to expand. Foreign analysts share this optimism, with Euromonitor expecting an annual increase of 5.3% and 5.9% for China’s entire home textile and bedding product markets respectively.

Thanks to the improving quality and competitive price, there is also growing demand for China’s home textile products from buyers around the world. Customs statistics show that the export value for home textile products increased 2.25% to USD 39.5 billion in 2017. Among all China’s export countries and regions, the US has the largest share, followed by the EU, ASEAN and Japan.
With all these favourable conditions in place, Intertextile Shanghai Home Textiles, to be held from 27 – 30 August, serves as an ideal platform for industry players to capture these business opportunities. “The rapid urbanisation and the consumption upgrade is unleashing unprecedented purchasing power in China. Participants can expect to benefit from this huge potential at our show,” Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd added.

Contract business sees big potential in Chinese market
The constant growth of Chinese consumers’ disposable income not only results in increased spending on home textile products, but also stimulates the development of tourism. A report from the General Office of the State Council of China stated that the annual number of domestic trips has nearly doubled, from 2.1 billion in 2010 to 4.4 billion in 2016. It is expected that domestic travel-related consumption will reach USD 869 billion in 2020 and contribute to over 5% of GDP.

The hotel industry in particular has benefited from this development, with the number of limited service hotels increasing 30% in the past seven years. This also implies remarkable opportunities for the home textile industry players doing contract business since quality products including furnishing fabrics, bedding & towelling and more will be sought after by the hotels.
Intertextile Shanghai Home Textiles – Autumn Edition is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Home Textile Association (CHTA).

To find out more about this fair, please visit: www.intertextilehome.com.
For more information about Messe Frankfurt textile fairs worldwide, please visit: http://texpertise-network.messefrankfurt.com.

26.02.2018

Hexcel’s Product Innovations for Aerospace, Automotive, Wind Energy and Marine at JEC WORLD 2018

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

More information:
Hexcel JEC World 2018 Aircraft
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE

Intertextile Shanghai Apparel Fabrics The Premium Wool Zone is the fair’s epicentre of high-end wool fabrics
08.02.2018

Intertextile Shanghai’s Premium Wool Zone with innovations and new-season styles

Buyers looking for premium wool fabrics will be spoilt for choice at next month’s Intertextile Shanghai Apparel Fabrics. The epicentre for those with this product on their sourcing checklist is the Premium Wool Zone, with mills from the UK, Italy, France, Peru and elsewhere located here, while the Italy Pavilion also includes a number of quality wool suppliers. Rounding out the sourcing options, and adding further quality and price variety, are the 180-plus domestic wool suppliers in hall 6.1.

Some of the notable overseas brands participating this edition include Abraham Moon & Sons, Aris Industrial, Dechamps, Dormeuil, Dugdale Bros & Co, Ferla, Fratelli Piacenza, Holland & Sherry, Huddersfield Fine Worsteds, Lanificio F.lli Cerruti DAL 1881 and Scabal. The Spring Edition of the industry’s most comprehensive sourcing platform for the spring / summer season, Intertextile Shanghai Apparel Fabrics, will feature some 3,300 exhibitors from around 20 countries covering all apparel fabrics and accessories product groups.

Growing affluence in China drives demand for premium wool fabrics

Buyers looking for premium wool fabrics will be spoilt for choice at next month’s Intertextile Shanghai Apparel Fabrics. The epicentre for those with this product on their sourcing checklist is the Premium Wool Zone, with mills from the UK, Italy, France, Peru and elsewhere located here, while the Italy Pavilion also includes a number of quality wool suppliers. Rounding out the sourcing options, and adding further quality and price variety, are the 180-plus domestic wool suppliers in hall 6.1.

Some of the notable overseas brands participating this edition include Abraham Moon & Sons, Aris Industrial, Dechamps, Dormeuil, Dugdale Bros & Co, Ferla, Fratelli Piacenza, Holland & Sherry, Huddersfield Fine Worsteds, Lanificio F.lli Cerruti DAL 1881 and Scabal. The Spring Edition of the industry’s most comprehensive sourcing platform for the spring / summer season, Intertextile Shanghai Apparel Fabrics, will feature some 3,300 exhibitors from around 20 countries covering all apparel fabrics and accessories product groups.

Growing affluence in China drives demand for premium wool fabrics

While a true global marketplace for the industry’s order writers with buyers from around 100 countries expected at Intertextile Shanghai next month, much of the demand for high-end wool at the fair comes from Chinese buyers thanks to growing affluence in the country. This is evidenced by the fact that Australian wool prices are at record highs this season, with China accounting for over 70% of Australian wool exports[1]. What’s more, whereas 15 to 20 years ago most wool imported by China was re-exported, nowadays around 60% is used to produce garments for the domestic market.

Intertextile’s number one position in China ensures that high-end domestic buyers are in abundance. “The buyer professionalism here is surprisingly high,” Mr Bob McAuley, Huddersfield Fine Worsteds’ President, explained last October. “We’re looking specifically for tailors and menswear specialty stores, and these type of buyers are definitely present.” Speaking about domestic market trends, he continued: “Retailers are not able to put all fashion in stores, so the made-tomeasure market is growing, especially in China. I’m surprised each edition how many new high-end Chinese brands we meet at this fair. There’s more menswear specialty stores opening here, whereas in the US, for example, the move is more towards going direct-to-consumer and online.”

Innovation and new-season styles added to heritage brands’ collections  

Precious metals such as gold and silver are known to have been worked into garments as long as 3,000 years ago, when they were hammered into extremely thin sheets then cut into ribbons. Modern technology has made this process much more straightforward, as well as opening up new opportunities. One of these is combining wool and silver, which Holland & Sherry will exhibit at Intertextile Shanghai. Their Argento collection of Super 200's wool fabrics applies a state of the art silver ion technology finish to superfine 13.5µ merino wool. This combination provides effective antibacterial protection, counteracting bacterial odour formation and keeping the fabrics hygienic and fresh. And because the conductive properties of silver prevent the build-up of static charge, the fabrics also benefit from anti-static properties.

While most collections in the Premium Wool Zone emphasise the brands’ heritage and tradition, like Holland & Sherry, some will be introducing new or updated collections. Dugdale Bros & Co refreshed its Royal Classic superfine Australian merino wool collection last year for the first time since 1987, adding around 30 patterns drawn directly from its original archive. Abraham Moon & Sons will showcase new fabrics at the fair for spring / summer ‘19 designed by Creative Director Martin Aveyard, which take in categories of classic, casual and contemporary, with a unique use of worsted, linen and cashmere combinations.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

SITIP and ROICA™ introduce new Heat Generating technology at the ISPO Munich © SITIP and ROICA™
BeHOT with ROICA™ for Modern Action Living
28.01.2018

SITIP and ROICA™ introduce new Heat Generating technology at the ISPO Munich

At the upcoming ISPO exhibition, SITIP are pleased to introduce BEHOT, a SITIP Heat Generating Technology for fabrics that has been licensed from the unique ROICA™ StretchEnergy™ System by Asahi Kasei and is already adopted by Santini that is offering Premium cycle wear Made in Italy since 1965.

SITIP is a leading Italian textile company specialized in high-tech and function-rich innovations for sport, technical underwear, shapewear, beachwear, footwear components, protective helmets, and in particular Velcro-receptive fabrics for mechanical fastening systems and a number of innovative technical fabrics for other industrial end-uses, all made through key manufacture technologies that include weft & warp knit fabric innovations.

Further, SITIP has more recently launched 16 unique trade brands, each one specialized in highly advanced innovation solutions designed to fit both market and the discerning needs of the contemporary consumer.

At the upcoming ISPO exhibition, SITIP are pleased to introduce BEHOT, a SITIP Heat Generating Technology for fabrics that has been licensed from the unique ROICA™ StretchEnergy™ System by Asahi Kasei and is already adopted by Santini that is offering Premium cycle wear Made in Italy since 1965.

SITIP is a leading Italian textile company specialized in high-tech and function-rich innovations for sport, technical underwear, shapewear, beachwear, footwear components, protective helmets, and in particular Velcro-receptive fabrics for mechanical fastening systems and a number of innovative technical fabrics for other industrial end-uses, all made through key manufacture technologies that include weft & warp knit fabric innovations.

Further, SITIP has more recently launched 16 unique trade brands, each one specialized in highly advanced innovation solutions designed to fit both market and the discerning needs of the contemporary consumer.

Santini is offering to the market a multi-panel thermal bib tight for the coldest winter training. Made with the special BeHot fabric by Sitip, constructed with the ROICA™ StretchEnergy™ active performance material, it not only insulates, but generates up to 2 degrees of heat as you workout as certified by CeRism, Outdoor Sport Research Centre at Verona University. Complete comfort and protection thanks to the Acquazero by Sitip treatment that ensures you stay dry even in the most challenging conditions.

The design is completed with breathable mesh braces for added comfort and a reflective pixel detail on the leg to improve visibility in low light conditions. BeHOT represents a special combination of a highly refined type of knitted construction combined with this unique ROICA™ Premium Stretch yarn function, and has been especially developed for this new high-function concept.

More information:
ISPO Munich SITIP ROICA
Source:

GB Network Marketing Communication

Messe Frankfurt
26.01.2018

Intertextile Shanghai Apparel Fabrics’ Spring / Summer 2019 trends

The need for real dialogue becomes ever more crucial
Amid reconstruction, the world is facing severe realities. In the midst of political disorder, environmental problems, and social scandals, how do we seek the light within the darkness of chaos? As societies become inundated with global waves of conflicting news, the need for real dialogue becomes ever more crucial. Personal interaction is irreplaceable – communicating with nature, reading the signs, and sensing the wind. Creating emotional connections with others and opening the mind to rationality. Now is the time to solidify core values with responsibility and identify key essences of life.

The need for real dialogue becomes ever more crucial
Amid reconstruction, the world is facing severe realities. In the midst of political disorder, environmental problems, and social scandals, how do we seek the light within the darkness of chaos? As societies become inundated with global waves of conflicting news, the need for real dialogue becomes ever more crucial. Personal interaction is irreplaceable – communicating with nature, reading the signs, and sensing the wind. Creating emotional connections with others and opening the mind to rationality. Now is the time to solidify core values with responsibility and identify key essences of life.

The view from a fashion perspective: toughness and resilience
How will fashion respond to these ever-changing turbulent times? Will fashion allow other elements to penetrate our lives whilst innumerable other issues make their presence felt? Fashion is meant to console, to provide a retreat during unpredictable times. At its core, fashion represents unhindered confidence and allows us to freely express ourselves. Let us address how to best confront negative forces through fashion and mindful resilience.

Intertextile Directions Spring / Summer 2019 Trend Forum
Developed by renowned trend experts from Tokyo, New York, Milan and Paris, the Intertextile Directions Trend Forum will present three trends for Spring / Summer 2019 under the overall theme ‘Dialogue’: @ sense, # couture and e. native. Exhibitors’ fabrics will illustrate the colour, fabric and print styles of each trend.

Overall colour trends
This season witnesses an enriched palette, encapsulating a refined and premium feel. Refreshing and vivid colours introduce a sense of vitality and elicit creativity.

As well as the international trends for Spring / Summer 2019, three Fabrics China Trend Forums will illustrate the domestic trends for ladieswear and menswear, as well as a ‘Fashion Focus’ area. A number of seminars will also be held to give more insight into the S/S 19 trends.

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

More information:
Intertextile Shanghai
Source:

Messe Frankfurt

Unique ROICA™ Premium Stretch Innovations @ ISPO Brandnew Village © ROICA™
18.12.2017

Unique ROICA™ Premium Stretch Innovations @ ISPO Brandnew Village

  • Unique ROICA™ Premium Stretch Innovations for the Active Wardrobe Debuts @ ISPO Brandnew Village
  • Hall B4, Booth No. B4.430 BN 02 Munich 28th-31th January 2018

Come and enjoy a real dedication to Responsible Innovation and Wellbeing in our new ROICA™  booth experience for Fabric Innovation inspiring the ROICA™ Active Wardrobe and the international ROICA™ Closet. Together, they will guide you to new hi-tech performance solutions in our partners unique stretch ideas, designed to meet both contemporary business and astute consumer desires. These latest ROICA™ innovations will be presented within the special ISPO BrandNew arena, a new high visibility concept of creativity revealed inside ISPO that truly matches the core DNA and values of the ROICA™ premium stretch brand.

ROICA™ will present The Modern Wardrobe concept in 3 distinct dimensions.

Together they bring to life our new stretch solutions that fit the supply chain for our target consumer confirming a clear brand identity that redefines performance creativity.

  • Unique ROICA™ Premium Stretch Innovations for the Active Wardrobe Debuts @ ISPO Brandnew Village
  • Hall B4, Booth No. B4.430 BN 02 Munich 28th-31th January 2018

Come and enjoy a real dedication to Responsible Innovation and Wellbeing in our new ROICA™  booth experience for Fabric Innovation inspiring the ROICA™ Active Wardrobe and the international ROICA™ Closet. Together, they will guide you to new hi-tech performance solutions in our partners unique stretch ideas, designed to meet both contemporary business and astute consumer desires. These latest ROICA™ innovations will be presented within the special ISPO BrandNew arena, a new high visibility concept of creativity revealed inside ISPO that truly matches the core DNA and values of the ROICA™ premium stretch brand.

ROICA™ will present The Modern Wardrobe concept in 3 distinct dimensions.

Together they bring to life our new stretch solutions that fit the supply chain for our target consumer confirming a clear brand identity that redefines performance creativity.

1 ROICA™ ACTIVE WARDROBE: Come and see leading commercial fashion ranges ready for the Summer 2018, that include the ROICA™ Eco Smart family and the ROICA™ Feel Good family of unique premium stretch yarn solutions.

2 ROICA™ INNOVATION: Here you can find the latest textile performance innovations from our partner mills to inspire even more brand creativity.

The ROICA™ Fabric Gallery is a rich and varied fabric offer that focuses on:
•    The revolutionary ROICA™ Eco Smart family of sustainably designed stretch yarns. These yarns are either GRS certified, or have the Cradle-to-Cradle Innovation Institute GOLD LEVEL certificate for material health, plus the Hohenstein Environment Certificate, where at its end-of-life, it smartly breaks down releasing less harmful materials. These unique commercialized solutions suites for intimates, athleisure, sportswear, and more.
•    The unique ROICA™ Feel Good family promises a new level of performance with ‘feel-good comfort’ and freshness. The ROICA™ CF yarn delivers an odor-neutralizing durable function in wash and wear because its active ingredient is locked inside the yarn and only requires a modest % to perform in most fabric structures.
•    A new ROICA™ Stretch Energy™ is a truly verified heat-generating system that combines a customised ROICA™ polymer with special fabric structures where a stretch and recovery action produces real warmth, maintaining support during exercise.

3 ROICA™ CLOSET: In this zone you can explore new ROICA™ garment designs from our experimental laboratory, using innovative Japanese fabric creativity.

Also at our ROICA™ booth, you will be able to explore sister brand Cupro innovations, designed responsibly for a new, luxe view of athleisure sportswear.

Today, the ROICA™ premium stretch brand sets the highest quality standards that are uniquely specialized and certificated perfectly focused on responsible performance for the active sportswear, swimwear and athliesure wear categories, making it the ‘smart-fit’ for the ISPO BrandNew Village presentation.

More information:
ROICA ISPO Brandnew Village
Source:

GB Network Marketing & Communication