From the Sector

Reset
80 results
STFI: Finalisten im Wettbewerb um Landesbaupreis 2024 (c) STFI
Verleihung des sächsischen Landesbaupreises 2024 in Dresden: Staatsminister Thomas Schmidt überreicht die Anerkennungsurkunden an Vertreter und Vertreterinnen des IHD, des STFI und der Firma Holzbau Meyer GmbH, Stollberg
25.03.2024

STFI: Finalisten im Wettbewerb um Landesbaupreis 2024

Im Rennen um den sächsischen Landespreis „Baupraxis der Zukunft – nachhaltig, innovativ, zirkulär“ gehören zu den zehn Finalisten zwei Entwicklungen, die aus sächsischen Industrieforschungsprojekten erwachsen sind. Zum einen überzeugte das Holz-Textil-Faltwerk die Jury als innovatives Raumkonzept für modulares Arbeiten und Wohnen. Zum anderen fand die Jury Gefallen an einem Hybridbauteil für Holz-Beton-Verbunddecken, bei dem ein biobasiertes Hanffaserkunststofflaminat als Balkenverstärkung größere Spannweiten ermöglicht. Beide Projekte wurden am 8. März 2024 zur Preisverleihung im Rahmen der Baumesse HAUS in Dresden mit einer undotierten Anerkennung gewürdigt.

Im Rennen um den sächsischen Landespreis „Baupraxis der Zukunft – nachhaltig, innovativ, zirkulär“ gehören zu den zehn Finalisten zwei Entwicklungen, die aus sächsischen Industrieforschungsprojekten erwachsen sind. Zum einen überzeugte das Holz-Textil-Faltwerk die Jury als innovatives Raumkonzept für modulares Arbeiten und Wohnen. Zum anderen fand die Jury Gefallen an einem Hybridbauteil für Holz-Beton-Verbunddecken, bei dem ein biobasiertes Hanffaserkunststofflaminat als Balkenverstärkung größere Spannweiten ermöglicht. Beide Projekte wurden am 8. März 2024 zur Preisverleihung im Rahmen der Baumesse HAUS in Dresden mit einer undotierten Anerkennung gewürdigt.

Holz-Textil-Faltwerke
Ein interdisziplinäres Entwicklerteam hat Holz-Textil-Faltwerke (HTF) konzipiert, die temporär zum Zweck des Schallschutzes, Sichtschutzes oder der räumlichen Abgrenzung aufstellbar sind. Die HTF sind selbsttragend und zeichnen sich durch kleines Packvolumen und Leichtbauweise aus. Unter Nutzung der Origami-Mathematik wurden mehrschichtige Holz-Textil-Verbunde entwickelt. Das Textil dient als zweidimensionales Scharnier der fertigen Konstruktion. Auf der Oberseite des Textils ist je nach technischer Anforderung eine entsprechende funktionale Schicht (z. B. Holz- oder Kunststoffelemente) zu fixieren. Dabei wird die Faltkinematik durch die Geometrie der biegesteifen Holzelemente bestimmt. Durch den Verbund aus biegeschlaffen textilen Materialien mit biegesteifen Holzelementen sind Faltbewegungen möglich, die eine selbsttragende Struktur entstehen lassen. Ein wahlweiser Einbau von Funktionselementen erhöht die Schallabsorption und -dämmung. Insgesamt entsteht durch die Origamifaltung von Holz und Textil ein ästhetisches Design. An der Entwicklung waren das Ressort Physik und Bauteile des Instituts für Holztechnologie Dresden gemeinnützige GmbH (IHD), die Hochschule für nachhaltige Entwicklung Eberswalde (HNEE) mit seinem Fachbereich Holzingenieurwesen sowie das Sächsische Textilforschungsinstitut e.V. (STFI) (Chemnitz) beteiligt.
Das IGF-Vorhaben 20946BR der Forschungsvereinigung Trägerverein Institut für Holztechnologie Dresden e.V. (TIHD) wurde unter dem Titel „Akustisch wirksame Origami-Faltwerke mit bedarfsgerecht anpassbarer Raumgeometrie auf Basis von Holz/Textilverbunden“ über die AiF im Rahmen des Programms zur Förderung der Industriellen Gemeinschaftsforschung (IGF) vom Bundesministerium für Wirtschaft und Klimaschutz auf Grund eines Beschlusses des Deutschen Bundestages gefördert

Gro-Coce – Zukunftsfähiges Hybridbauteil aus Holz, Beton und Hanffasern
Zukunftsweisende Materialien bieten die Entwicklungen aus dem Bereich nachwachsender Rohstoffe in Kombination mit biobasierten Harzsystemen. Ein interdisziplinäres Team modifizierte die Herstellungstechnologie von Holz-Beton-Verbunddecken. Das Forschungsprojekt Gro-Coce verfolgte das Ziel, durch die Verbindung nachhaltiger Bauprodukte und -weisen ein innovatives Deckensystem zu entwickeln, welches auf Grundlage der Holz-Beton-Verbundbauweise (HBV-Bauweise) als ökonomische und ökologisch vorteilhafte Alternative zu den momentan vorherrschenden, energie- und ressourcenintensiven Deckenkonstruktionen aus Stahlbeton funktioniert. Das Deckensystem besteht aus Holzstegen, deren Zugzone durch hochleistungsfähige hanffaserbasierte Armierungstextilien verstärkt wird. Dadurch gelingt eine deutliche Reduktion des notwendigen Holzquerschnittes und eine anforderungsgerechtere sowie verantwortungsvollere Nutzung des Querschnitts für alle üblichen Spannweiten des Hoch- und Geschossbaus. Ziel war die Nutzbarmachung bisher nicht erreichter mechanischer Kennwerte der Hanfbastfasern, durch die Entwicklung neuartiger Bastfasergewinnungs- und Aufbereitungsmethoden. Für die Entwicklung des neuartigen Deckensystems kooperierten die Partner Hanffaser Uckermark (Prenzlau), Holzbau Meyer (Stollberg/Erzgebirge), Hochschule für Technik, Wirtschaft und Kultur (Leipzig) sowie das Sächsische Textilforschungsinstitut e.V. (STFI), Fachbereich Web- und Maschenwaren, Verstärkungsstrukturen (Chemnitz). Das Forschungsprojekt ZIM KF4013848KI9 wurde unter dem Titel „Green organic reinforced high performance Timber Concrete Ceilings – Hanffaserkunststoffverstärkte, hochleistungsfähige und ressourceneffiziente Holz-Beton-Verbund-Decken“ über das Zentrale Innovationsprogramm Mittelstand (ZIM) vom Bundesministerium für Wirtschaft und Klimaschutz auf Grund eines Beschlusses des Deutschen Bundestages gefördert.

Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year Photo: DITF
The Flexidress in its various forms
22.03.2024

HEREWEAR is winner of the Cellulose Fibre Innovation of the Year

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

At the "International Conference on Cellulose Fibers 2024" in Cologne, Germany, the Nova Institute for Ecology and Innovation awarded first place in the Innovation Prize to the project partners of the EU-funded HEREWEAR project. They presented a dress made of cellulose fibers, which is entirely made of straw pulp.

HEREWEAR is an EU-wide research project that brings together partners from research and industry. They are working to establish a European circular economy for locally produced textiles and clothing made from bio-based raw materials.
The HEREWEAR consortium consists of small and medium-sized enterprises and research institutions. HEREWEAR covers all the necessary expertise and infrastructure from academic and applied research and industry from nine EU countries.

The HEREWEAR approach includes technical and ecological innovations in the production of fibers, yarns, fabrics, knitwear and garments, as well as the use of regional value chains and the circular development of fashion items.

New technologies for wet and melt spinning of cellulose and bio-based polyesters, e.g. PLA, from which yarns and fabrics are produced, form the technical basis. Coating and dyeing processes have been developed and tested as part of the project. In addition to reducing the carbon footprint of the product, another environmental goal is to reduce the release of microfibers throughout the textile manufacturing process and life cycle.

Improving the sustainability and recyclability of the developed garments is ensured by design for circularity and digitally networked production means. On-demand production is realized in so-called "microfactories", which are individualized and produce only for actual demand. This production method can be achieved through regional, networked value chains and enables the traceability of materials and manufacturing processes.

The dress presented at the award ceremony is an example of the cooperation and the different qualifications of the project partners: TNO (Netherlands Organization for Applied Scientific Research) provided sustainably produced pulp. The HighPerCell fibers were produced in DITF's spinning facilities. At the same time, designers from the fashion label Vretena created the design for the flexible, two-piece dress, which can be knitted without cutting waste. DITF textile experts worked with the designers to develop the knitting pattern. DITF textile engineers and technicians produced the knitted fabric and assembled the dress at the institutes’ technical center. DITF computer scientists and engineers created the "value chain" and "digital twins" for digital traceability of the production processes.

The innovation prize was awarded to the HEREWEAR consortiu for their joint achievement. Representatives of DITF Denkendorf and Vretena accepted the award on behalf of the EU project partners.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

DITF: CO2-negative construction with new composite material Photo: DITF
Structure of the wall element
20.03.2024

DITF: CO2-negative construction with new composite material

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO2 from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO2 balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO2 from the atmosphere.

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO2 from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO2 balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO2 from the atmosphere.

Carbon fibers in the form of technical fabrics reinforce the side walls of the wall elements. They absorb tensile forces and are intended to stabilize the building material in the same way as reinforcing steel in concrete. The carbon fibers used are bio-based, produced from biomass. Lignin-based carbon fibers, which have long been technically optimized at DITF Denkendorf, are particularly suitable for this application: They are inexpensive due to low raw material costs and have a high carbon yield. In addition, unlike reinforcing steel, they are not susceptible to oxidation and therefore last much longer. Although carbon fibers are more energy-intensive to produce than steel, as used in reinforced concrete, only a small amount is needed for use in building materials. As a result, the energy and CO2 balance is much better than for reinforced concrete. By using solar heat and biomass to produce the carbon fibers and the weathering of the stone dust, the CO2 balance of the new building material is actually negative, making it possible to construct CO2-negative buildings.

The third component of the new building material is biochar. This is used as a filler between the two rock slabs. The char acts as an effective insulating material. It is also a permanent source of CO2 storage, which plays a significant role in the CO2 balance of the entire wall element.

From a technical point of view, the already realized demonstrator, a wall element for structural engineering, is well developed. The natural stone used is a gabbro from India, which has a high-quality appearance and is suitable for high loads. This has been proven in load tests.  Bio-based carbon fibers serve as the top layer of the stone slabs. The biochar from Convoris GmbH is characterized by particularly good thermal insulation values.

The CO2 balance of a house wall made of the new material has been calculated and compared with that of conventional reinforced concrete. This results in a difference in the CO2 balance of 157 CO2 equivalents per square meter of house wall. A significant saving!

* (Methods for removing atmospheric carbon dioxide (Carbon Dioxide Removal) by Direct Air Carbon Capture, Utilization and Sustainable Storage after Use (DACCUS).

Source:

Deutsche Institute für Textil- und Faserforschung

Konzept Recycling Center Grafik: Sächsisches Textilforschungsinstitut e.V. (STFI)
20.03.2024

Abschlussmeeting im SmartERZ-Projekt TRICYCLE

Im Februar fand im Sächsischen Textilforschungsinstitut e. V. (STFI) in Chemnitz das Abschlussmeeting des Verbundprojekts „TRICYCLE – Entwicklung und Konzeptionierung eines SmartERZ Smart Composites Recycling Centers“ statt. TRICYCLE ist ein Projekt des disziplinübergreifenden Innovationsvorhaben SmartERZ aus dem Erzgebirge, welches durch das Bundesministerium für Bildung und Forschung (BMBF) im Programm „WIR! – Wandel durch Innovation in der Region“ gefördert wird. SmartERZ ist ein branchenübergreifendes Technologiebündnis zur Entwicklung von funktionsintegrierten Faserverbundwerkstoffen.

Im Februar fand im Sächsischen Textilforschungsinstitut e. V. (STFI) in Chemnitz das Abschlussmeeting des Verbundprojekts „TRICYCLE – Entwicklung und Konzeptionierung eines SmartERZ Smart Composites Recycling Centers“ statt. TRICYCLE ist ein Projekt des disziplinübergreifenden Innovationsvorhaben SmartERZ aus dem Erzgebirge, welches durch das Bundesministerium für Bildung und Forschung (BMBF) im Programm „WIR! – Wandel durch Innovation in der Region“ gefördert wird. SmartERZ ist ein branchenübergreifendes Technologiebündnis zur Entwicklung von funktionsintegrierten Faserverbundwerkstoffen.

Im Vorhaben wurde ein technologisches Recyclingkonzept für die zukünftig entstehenden smarten Produkte sowie die in der Produktion entstehenden Abfälle in der Region entwickelt. Ziel war die Entwicklung standardisierter, skalierbarer Verfahren, mit größtmöglichem Automatisierungsgrad unter Einhaltung der geltenden Gesetze, Verordnungen und Normen. Das Projekt lief vom 01.09.2021 bis 31.12.2023. Im Abschlussmeeting einer 28-monatigen Projektarbeit wurden den Teilnehmenden die Ergebnisse vorgestellt. Die Arbeit beinhaltet das Centerkonzept sowie eine Datenerhebung zu potenziell regional verfügbaren Mengen und anschließenden Verwertungsoptionen sowie die Entwicklung gewisser Designrichtlinien für das Recycling.

Eingegossen in die bestehenden Strukturen der SmartERZ Region und darüber hinaus, ist das Konzept für ein Center entstanden, welches als eine Art Drehkreuz für regionale Abfälle rund um diese Thematik fungieren soll. Darüber können Abfallströme gesammelt, erstbehandelt und für das rohstoffliche Recycling vorbereitet werden. Die Erstbehandlung schließt Technologien der Qualitätskontrolle/Qualitätsmanagement, Zerkleinerung, Pelletierung und Kompaktierung ein. Über dieses Drehkreuz sollen auch Kleinstmengen wirtschaftlich attraktiven Verwertungswegen und einer Weiterverwendung zugänglich gemacht werden.

Neben der stofflichen Vernetzung beinhaltet das Konzept für das Recycling Center die Voraussetzungen um als Vernetzungsstelle rund um die Thematik (textiler) Kreislaufwirtschaft zu fungieren. Unternehmen, Forschung, Lehre und öffentliche Einrichtungen können und sollen in Diskurs treten, um die bestmöglichen Verwertungsoptionen für entsprechende Abfälle zu finden, aber auch die Vermeidung und Wiederverwendung von Abfällen voranzutreiben, langlebige Produkte zu schaffen und Wissen zu teilen.

Die Projektpartner stimmen überein, dass nun nach Wegen gesucht werden muss, um das entstandene Konzept umzusetzen. Zusätzlich bahnen sich bereits Kooperationen mit anderen Forschungsvorhaben an. Johannes Leis als Projektleiter TRICYCLE und Dr. Stefan Minar seitens des Projekts WIRreFa sehen nun die Chance, gar die Notwendigkeit, die offensichtlichen Schnittstellen beider Projekte so schnell wie möglich zusammenzubringen. Vielleicht noch während der zweiten Phase des Projektes WIReFa.

More information:
SmartErz TRICYCLE STFI BMBF Recycling
Source:

P3N MARKETING GMBH

Robot system (c) STFI
20.03.2024

STFI: Highlights of textile research at Techtextil 2024

STFI will be presenting high-end textile products and solutions at Techtextil 2024. The highlights from current research results and innovations provide an insight into the digitalisation of textile production, show applications for 3D printing and smart technical textiles and provide examples of particularly sustainably designed products as well as innovative approaches for protective and medical textiles.

The central highlight of STFI's presence at Techtextil is a robot system that demonstrates the automated processing of a bobbin frame on a small scale. The pick-and-place application demonstrates camera-supported gripping of the bobbins. The robot is part of the STFI's “Textile Factory of the Future” which demonstrates automation solutions for the textile industry in a laboratory environment.

STFI will be presenting high-end textile products and solutions at Techtextil 2024. The highlights from current research results and innovations provide an insight into the digitalisation of textile production, show applications for 3D printing and smart technical textiles and provide examples of particularly sustainably designed products as well as innovative approaches for protective and medical textiles.

The central highlight of STFI's presence at Techtextil is a robot system that demonstrates the automated processing of a bobbin frame on a small scale. The pick-and-place application demonstrates camera-supported gripping of the bobbins. The robot is part of the STFI's “Textile Factory of the Future” which demonstrates automation solutions for the textile industry in a laboratory environment.

From the field of sustainable products and solutions, a sleeping bag with bio-based and therefore vegan filling material and a natural fibre-based composite element for furniture construction, in which LEDs and capacitive proximity sensors for contactless function control have been applied using embroidery technology, will be on show. Printed heating conductor structures demonstrate current research work for the e-mobility of the future, as the individually controllable seat and interior heating should ultimately reduce weight and save energy compared to conventional heating systems.

While a protective suit for special task forces protects against the dangers of a Molotov cocktail attack, a shin guard and a knee brace with patellar ring illustrate the process combination of 3D printing and UV LED cross-linking. Other highlights from lightweight textile construction include the rib of a vertical rudder of an Airbus A320 and a green snowboard made from recycled carbon fibres.

More information:
STFI Techtextil Smart textiles
Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

Professor Dr.-Ing. Markus Milwich Photo: DITF
Professor Dr.-Ing. Markus Milwich.
19.03.2024

Markus Milwich represents "Lightweight Design Agency for Baden-Württemberg"

Lightweight design is a key enabler for addressing the energy transition and sustainable economy. Following the liquidation of the state agency Leichtbau BW GmbH, a consortium consisting of the Allianz Faserbasierter Werkstoffe Baden-Württtemberg (AFBW), the Leichtbauzentrum Baden-Württemberg (LBZ e.V. -BW) and Composites United Baden-Württemberg (CU BW) now represents the interests of the lightweight construction community in the State.

The Lightweight Design Agency for Baden-Württemberg is set up for this purpose on behalf of and with the support of the State. The Lightweight Construction Alliance BW is the central point of contact for all players in the field of lightweight construction in the State and acts in their interests at national and international level. Professor Markus Milwich from the German Institutes of Textile and Fiber Research Denkendorf (DITF) represents the agency.

Lightweight design is a key enabler for addressing the energy transition and sustainable economy. Following the liquidation of the state agency Leichtbau BW GmbH, a consortium consisting of the Allianz Faserbasierter Werkstoffe Baden-Württtemberg (AFBW), the Leichtbauzentrum Baden-Württemberg (LBZ e.V. -BW) and Composites United Baden-Württemberg (CU BW) now represents the interests of the lightweight construction community in the State.

The Lightweight Design Agency for Baden-Württemberg is set up for this purpose on behalf of and with the support of the State. The Lightweight Construction Alliance BW is the central point of contact for all players in the field of lightweight construction in the State and acts in their interests at national and international level. Professor Markus Milwich from the German Institutes of Textile and Fiber Research Denkendorf (DITF) represents the agency.

The use of lightweight materials in combination with new production technologies will significantly reduce energy consumption in transportation, the manufacturing industry and the construction sector. Resources can be saved through the use of new materials. As a cross-functional technology, lightweight construction covers entire value chain from production and use to recycling and reuse.

The aim of the state government is to establish Baden-Württemberg as a leading provider of innovative lightweight construction technologies in order to strengthen the local economy and secure high-quality jobs.

Among others, the "Lightweight Construction Alliance Baden-Württemberg" will continue the nationally renowned "Lightweight Construction Day", which acts as an important source of inspiration for a wide range of lightweight construction topics among business and scientific community.

Professor Milwich, an expert with many years of experience and an excellent network beyond the State's borders, has been recruited for this task. In his role, Milwich also represents the state of Baden-Württemberg on the Strategy Advisory Board of the Lightweight Construction Initiative of the Federal Ministry for Economic Affairs and Climate Action, which supports the cross functional-technology and efficient transfer of knowledge between the various nationwide players in lightweight construction and serves as a central point of contact for entrepreneurs nationwide for all relevant questions.

From 2005 to 2020, Professor Milwich headed the Composite Technology research at the DITF, which was integrated into the Competence Center Polymers and Fiber Composites in 2020. He is also an honorary professor at Reutlingen University, where he teaches hybrid materials and composites. "Lightweight design is an essential aspect for sustainability, environmental and resource conservation. I always showcase this in research and teaching and now also as a representative of the lightweight construction community in Baden-Württemberg," emphasizes Professor Milwich.

Source:

Deutsche Institute für Textil- und Faserforschung

STFI: Lightweight construction innovations at JEC World in Paris (c) silbaerg GmbH and STFI (see information on image)
23.02.2024

STFI: Lightweight construction innovations at JEC World in Paris

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

VliesComp
The aim of the industrial partners Tenowo GmbH (Hof), Siemens AG (Erlangen), Invent GmbH (Braunschweig) and STFI united in the VliesComp project is to bring recycled materials back onto the market in various lightweight construction solutions. The application fields "Innovative e-machine concepts for the energy transition" and "Innovative e-machine concepts for e-mobility" were considered as examples. On display at JEC World in Paris will be a lightweight end shield for electric motors made from hybrid nonwovens - a mixture of thermoplastic fibre components and recycled reinforcing fibres - as well as nonwovens with 100% recycled reinforcing fibres. The end shield was ultimately manufactured with a 100% recycled fibre content. The tests showed that, compared to the variant made from primary carbon fibres using the RTM process, a 14% reduction in CO2 equivalent is possible with the same performance. The calculation for the use of the prepreg process using a bio-resin system shows a potential for reducing the CO2 equivalent by almost 70 %.

Bast fibre reinforcement
To increase stability in the plant stem, bast fibres form in the bark area, which support the stem but, in contrast to the rigid wood, are very flexible and allow slender, tall plants to move in the wind without breaking.A new process extracts the bast bark from hemp by peeling.The resulting characteristic values, such as tensile modulus of elasticity, breaking strength and elongation, are very promising in comparison with the continuous rovings made of flax available on the market.The material could be used as reinforcement in lightweight construction.At JEC World, STFI will be exhibiting reinforcing bars that have been processed into a knitted fabric using a pultrusion process based on bio-based reinforcing fibres made from hemp bast for mineral matrices.

Source:

Sächsische Textilforschungsinstitut e.V. (STFI)

DITF: Biopolymers from bacteria protect technical textiles Photo: DITF
Charging a doctor blade with molten PHA using a hot-melt gun
23.02.2024

DITF: Biopolymers from bacteria protect technical textiles

Textiles for technical applications often derive their special function via the application of coatings. This way, textiles become, for example wind and water proof or more resistant to abrasion. Usually, petroleum-based substances such as polyacrylates or polyurethanes are used. However, these consume exhaustible resources and the materials can end up in the environment if handled improperly. Therefore, the German Institutes of Textile and Fiber Research Denkendorf (DITF) are researching materials from renewable sources that are recyclable and do not pollute the environment after use. Polymers that can be produced from bacteria are here of particular interest.

Textiles for technical applications often derive their special function via the application of coatings. This way, textiles become, for example wind and water proof or more resistant to abrasion. Usually, petroleum-based substances such as polyacrylates or polyurethanes are used. However, these consume exhaustible resources and the materials can end up in the environment if handled improperly. Therefore, the German Institutes of Textile and Fiber Research Denkendorf (DITF) are researching materials from renewable sources that are recyclable and do not pollute the environment after use. Polymers that can be produced from bacteria are here of particular interest.

These biopolymers have the advantage that they can be produced in anything from small laboratory reactors to large production plants. The most promising biopolymers include polysaccharides, polyamides from amino acids and polyesters such as polylactic acid or polyhydroxyalkanoates (PHAs), all of which are derived from renewable raw materials. PHAs is an umbrella term for a group of biotechnologically produced polyesters. The main difference between these polyesters is the number of carbon atoms in the repeat unit. To date, they have mainly been investigated for medical applications. As PHAs products are increasingly available on the market, coatings made from PHAs may also be increasingly used in technical applications in the future.

The bacteria from which the PHAs are obtained grow with the help of carbohydrates, fats and an increased CO2 concentration and light with suitable wavelength.

The properties of PHA can be adapted by varying the structure of the repeat unit. This makes polyhydroxyalkanoates a particularly interesting class of compounds for technical textile coatings, which has hardly been investigated to date. Due to their water-repellent properties, which stem from their molecular structure, and their stable structure, polyhydroxyalkanoates have great potential for the production of water-repellent, mechanically resilient textiles, such as those in demand in the automotive sector and for outdoor clothing.

The DITF have already carried out successful research work in this area. Coatings on cotton yarns and fabrics made of cotton, polyamide and polyester showed smooth and quite good adhesion. The PHA types for the coating were both procured on the open market and produced by the research partner Fraunhofer IGB. It was shown that the molten polymer can be applied to cotton yarns by extrusion through a coating nozzle. The molten polymer was successfully coated onto fabric using a doctor blade. The length of the molecular side chain of the PHA plays an important role in the properties of the coated textile. Although PHAs with medium-length side chains are better suited to achieving low stiffness and a good textile handle, their wash resistance is low. PHAs with short side chains are suitable for achieving high wash and abrasion resistance, but the textile handle is somewhat stiffer.

The team is currently investigating how the properties of PHAs can be changed in order to achieve the desired resistance and textile properties in equal measure. There are also plans to formulate aqueous formulations for yarn and textile finishing. This will allow much thinner coatings to be applied to textiles than is possible with molten PHAs.

Other DITF research teams are investigating whether PHAs are also suitable for the production of fibers and nonwovens.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

DITF: Modular cutting tool recognized with JEC Composites Innovation Award Photo: Leitz
Hermann Finckh (DITF) and Andreas Kisselbach (Leitz GmbH & Co. KG)
16.02.2024

DITF: Modular cutting tool recognized with JEC Composites Innovation Award

Hermann Finckh received the JEC Composites Innovation Award in the category Equipment Machinery & Heavy Industries for the innovation MAXIMUM WEIGHT REDUCTION OF COMPOSITE TOOLS. The research team from the German Institutes of Textile and Fiber Research Denkendorf (DITF) developed a new modular cutting tool for woodworking machines, which was produced and successfully tested by the industrial partner Leitz GmbH & Co. KG.

The extremely lightweight planing tool was made from carbon fiber-reinforced plastics (CFRPs) instead of aluminum using a completely new modular construction principle. As a result, it weighs 50 percent less than conventional tools. It enables significantly higher working speed, which enables a one-and-a-half-fold increase in productivity. The development of the extreme-lightweight principle was performed by numerical simulation and every solution was virtually tested in advance. A patent application has been filed for the concept.

Hermann Finckh received the JEC Composites Innovation Award in the category Equipment Machinery & Heavy Industries for the innovation MAXIMUM WEIGHT REDUCTION OF COMPOSITE TOOLS. The research team from the German Institutes of Textile and Fiber Research Denkendorf (DITF) developed a new modular cutting tool for woodworking machines, which was produced and successfully tested by the industrial partner Leitz GmbH & Co. KG.

The extremely lightweight planing tool was made from carbon fiber-reinforced plastics (CFRPs) instead of aluminum using a completely new modular construction principle. As a result, it weighs 50 percent less than conventional tools. It enables significantly higher working speed, which enables a one-and-a-half-fold increase in productivity. The development of the extreme-lightweight principle was performed by numerical simulation and every solution was virtually tested in advance. A patent application has been filed for the concept.

Testfahrt im Erzgebirge (c) silbaerg GmbH
09.02.2024

Grünes Snowboard mit JEC Innovation Award ausgezeichnet

Naturfasern und Rezyklate sind die Grundlage der neuesten Produktlinie von silbaerg Snowboards. silbaerg fertigt seit 2011 hochwertige Snowboards mittels patentierter A.L.D.-tech®. A.L.D. steht für anisotropic layer design und ermöglicht eine bisher ungesehene Anpassungsfähigkeit an verschiedene Fahrsituationen.  

Handgefertigte A.L.D.tech®-Lagen umgeben den Holzkern und nicht, wie bei anderen Anbietern üblich, klassische industriell gefertigte Bi-, Tri- oder Quadraxialgelege. Bereits 2015 wurden dabei erstmals Naturfasern in Form von Tapes verwendet.

Naturfasern und Rezyklate sind die Grundlage der neuesten Produktlinie von silbaerg Snowboards. silbaerg fertigt seit 2011 hochwertige Snowboards mittels patentierter A.L.D.-tech®. A.L.D. steht für anisotropic layer design und ermöglicht eine bisher ungesehene Anpassungsfähigkeit an verschiedene Fahrsituationen.  

Handgefertigte A.L.D.tech®-Lagen umgeben den Holzkern und nicht, wie bei anderen Anbietern üblich, klassische industriell gefertigte Bi-, Tri- oder Quadraxialgelege. Bereits 2015 wurden dabei erstmals Naturfasern in Form von Tapes verwendet.

silbaerg setzt auf den Einsatz regionaler Produkte. So kommen Hanffasertapes von Sachsenleinen GmbH (Markkleeberg, Sachsen) zum Einsatz, deren Rohstoff seinen Ursprung auf den Feldern zwischen Chemnitz und Leipzig hat. Für die Versteifung der Boards werden weiterhin Carbonfasertapes benötigt. Hier greift silbaerg auf Forschungsergebnisse des Sächsischen Textilforschungsinstitutes e. V. (STFI) in Chemnitz zurück: Carbonfaserabfälle von silbaerg werden in Form von Recyclingvliesstoffen wiedereingesetzt. Die Verschnittreste, die bei silbaerg in der Produktion anderer Boards anfallen, werden am STFI auf der Anlagentechnik des Zentrums für Textilen Leichtbau aufbereitet und zu Carbonfaservliesstoffen verarbeitet. Diese werden anschließend zu Carbonfasertapes konfektioniert und dienen zusammen mit Hanffasertapes als Verstärkungsstruktur im grünen Snowboard, die damit absolut made in Saxony sind.

Aktuell werden erste Boards von silbaerg-Teamfahrern im Schnee getestet. Diese Testboards nutzen ein neues biobasiertes Harzsystem der bto-epoxy GmbH (Amstetten, Österreich), welches einen Bio-Anteil von 31 % im Harz und 54 % im Härter aufweist. Es ist geplant, die neue Produktlinie noch im Jahr 2024 auf den Markt zu bringen.  

Durch den Einsatz von Hanffasern und recycelten Carbonfasern und die damit verbundene Substitution von Primärmaterial werden Ziele für eine nachhaltige Entwicklung erfüllt. Durch die Nutzung von hauseigenen Rezyklaten lässt sich zudem die Abfallmenge von Carbonfasern im Unternehmen um ca. 75 % reduzieren. Welchen Einfluss dies auf die LCA der Produkte hat, wird aktuell berechnet. 

Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

DITF: Recyclable event and trade fair furniture made of paper (c) DITF
Structurally wound paper yarn element with green sensor yarn.
26.01.2024

DITF: Recyclable event and trade fair furniture made of paper

A lot of waste is generated in the trade fair and event industry. It makes sense to have furniture that can quickly be dismantled and stored to save space - or simply disposed of and recycled. Paper is the ideal raw material here: locally available and renewable. It also has an established recycling process. The German Institutes of Textile and Fiber Research (DITF) and their project partners have jointly developed a recycling-friendly modular system for trade fair furniture. The "PapierEvents" project was funded by the German Federal Environmental Foundation (DBU).

Once the paper has been brought into yarn form, it can be processed into a wide variety of basic elements using the structure winding process, creating a completely new design language.

A lot of waste is generated in the trade fair and event industry. It makes sense to have furniture that can quickly be dismantled and stored to save space - or simply disposed of and recycled. Paper is the ideal raw material here: locally available and renewable. It also has an established recycling process. The German Institutes of Textile and Fiber Research (DITF) and their project partners have jointly developed a recycling-friendly modular system for trade fair furniture. The "PapierEvents" project was funded by the German Federal Environmental Foundation (DBU).

Once the paper has been brought into yarn form, it can be processed into a wide variety of basic elements using the structure winding process, creating a completely new design language.

The unusual look is created in the structure winding process. In this technology developed at the DITF, the yarn is deposited precisely on a rotating mandrel. This enables high process speeds and a high degree of automation. After the winding process, the individual yarns are fixed, creating a self-supporting component. A starch-based adhesive, which is also made from renewable and degradable raw materials, was used in the project for the fixation.

The recyclability of all the basic elements developed in the project was investigated and confirmed. For this purpose the research colleagues at the project partner from the Department of Paper Production and Mechanical Process Engineering at TU Darmstadt (PMV) used the CEPI method, a new standard test procedure from the Confederation of European Paper Industries.

Sensor and lighting functions were also implemented in a recycling-friendly manner. The paper sensor yarns are integrated into the components and detect contact.

Also, a modular system for trade fair and event furniture was developed. The furniture is lightweight and modular. For example, the total weight of the counter shown is well under ten kilograms and individual parts can easily be shipped in standard packages. All parts can be used several times, making them suitable for campaigns lasting several weeks.

A counter, a customer stopper in DIN A1 format and a pyramid-shaped stand were used as demonstrators. The research work of the DITF (textile technology) and PMV (paper processing) was supplemented by other partners: GarnTec GmbH developed the paper yarns used, the industrial designers from quintessence design provided important suggestions for the visual and functional design of the elements and connectors and the event agency Rödig GmbH evaluated the ideas and concepts in terms of usability in practical use.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

Symposium"All about cellulose" Grafik: Thüringisches Institut für Textil- und Kunststoff-Forschung Rudolstadt e.V.
08.01.2024

Rudolstädter Kunststofftage: Symposium "All about cellulose"

As part of the "RUDOLSTÄDTER KUNSTSTOFFTAGE" series, the TITK - Thüringisches Institut für Textil- und Kunststoff-Forschung e.V. invites you to the symposium "All about cellulose: How we can use a native polymer for intelligent, innovative and sustainable products".

In their presentations, speakers from industry and research will highlight the potential and diverse applications of the sustainable platform polymer cellulose for clothing, hygiene and medical textiles, battery and storage technology or as a meltable material for 3D printing.
The conference language is English.

The conference is aimed at textile manufacturers and processors as well as materials scientists and SMEs from the industry in general. As in previous years, there will be the opportunity to visit the technical centres and laboratories of the business-oriented research institute.

Event details and registration options can be found under DATES.

As part of the "RUDOLSTÄDTER KUNSTSTOFFTAGE" series, the TITK - Thüringisches Institut für Textil- und Kunststoff-Forschung e.V. invites you to the symposium "All about cellulose: How we can use a native polymer for intelligent, innovative and sustainable products".

In their presentations, speakers from industry and research will highlight the potential and diverse applications of the sustainable platform polymer cellulose for clothing, hygiene and medical textiles, battery and storage technology or as a meltable material for 3D printing.
The conference language is English.

The conference is aimed at textile manufacturers and processors as well as materials scientists and SMEs from the industry in general. As in previous years, there will be the opportunity to visit the technical centres and laboratories of the business-oriented research institute.

Event details and registration options can be found under DATES.

Source:

Thüringisches Institut für Textil- und Kunststoff-Forschung Rudolstadt e.V.

Per Ultraschallschweißverfahren hergestellter Demonstrator. Foto: feelSpace
Per Ultraschallschweißverfahren hergestellter Demonstrator.
05.12.2023

E-Textiles: Navigationsgürtel für Sehbehinderte

Vibrationen weisen den Weg: Ein Navigationsgürtel hilft Sehbehinderten, ihr Ziel zu erreichen. Man gibt über eine App die Strecke ein, die man zurücklegen möchte, drückt auf „Start“ und der Gürtel führt wie ein Kompass in die richtige Richtung. Die Deutschen Institute für Textil- und Faserforschung Denkendorf (DITF) haben ein Kontaktierverfahren entwickelt, womit diese Orientierungshilfe - und E-Textiles allgemein -wirtschaftlicher und komfortabler hergestellt werden können.

Wenn man in eine Straße abbiegen muss, vibriert der naviGürtel® der Firma feelSpace. Er signalisiert, in welcher Richtung man steht und hilft so nicht nur draußen, sondern auch in geschlossenen Räumen bei der Orientierung. Dafür sorgen 16 Vibrationselemente, die rings um den Gürtel angeordnet sind. Der Projektpartner AMOHR entwickelte hierzu ein spezielles leitfähiges Band, das einerseits durch seine hohe Elastizität einen angenehmen Tragekomfort bietet und andererseits durch eingearbeitete Versteifungen die Kontaktierung der Vibrationselemente ermöglicht.

Vibrationen weisen den Weg: Ein Navigationsgürtel hilft Sehbehinderten, ihr Ziel zu erreichen. Man gibt über eine App die Strecke ein, die man zurücklegen möchte, drückt auf „Start“ und der Gürtel führt wie ein Kompass in die richtige Richtung. Die Deutschen Institute für Textil- und Faserforschung Denkendorf (DITF) haben ein Kontaktierverfahren entwickelt, womit diese Orientierungshilfe - und E-Textiles allgemein -wirtschaftlicher und komfortabler hergestellt werden können.

Wenn man in eine Straße abbiegen muss, vibriert der naviGürtel® der Firma feelSpace. Er signalisiert, in welcher Richtung man steht und hilft so nicht nur draußen, sondern auch in geschlossenen Räumen bei der Orientierung. Dafür sorgen 16 Vibrationselemente, die rings um den Gürtel angeordnet sind. Der Projektpartner AMOHR entwickelte hierzu ein spezielles leitfähiges Band, das einerseits durch seine hohe Elastizität einen angenehmen Tragekomfort bietet und andererseits durch eingearbeitete Versteifungen die Kontaktierung der Vibrationselemente ermöglicht.

Im herkömmlichen Verfahren werden Kontaktierungen gelötet. Das Team um Tobias Hecht hat für die Herstellung von E-Textiles ein Verfahren erschlossen, das bisher bei der Kontaktierung von Mikrochips verwendet wird: das Ultraschallschweißen. Damit können die Kontaktstellen verglichen mit einem Lötverfahren deutlich verkleinert werden, die Kontaktierungen werden punktgenau fixiert. Beim Löten wird das Lötmaterial aufgeschmolzen und die Kontaktstellen werden erhitzt. Das heiße Lot zerfließt, wodurch man einen relativ großflächigen Wärmeeintrag erhält. Durch das Fließen des Lotes entstehen auch abseits der Kontaktstelle ungewollte Versteifungen, die vor allem bei E-Textiles die Funktion beeinträchtigen. Beim Ultraschallschweißen entsteht weniger Hitze, was das Material schont.

Darüber hinaus hat das Ultraschweißen gegenüber dem Lötverfahren Vorteile für Gesundheit und Umwelt. Lötzinn ist mit Flussmittel versetzt, das gesundheitsschädliche Dämpfe erzeugt, die abgesaugt und gefiltert werden müssen.

Das Forschungsprojekt wurde im Rahmen des Zentralen Innovationsprogrammes Mittelstand (ZIM) gefördert.

Source:

Deutsche Institute für Textil- und Faserforschung

DITF: Lignin coating for Geotextiles Photo: DITF
Coating process of a cellulose-based nonwoven with the lignin compound using thermoplastic processing methods on a continuous coating line.
27.10.2023

DITF: Lignin coating for Geotextiles

Textiles are a given in civil engineering: they stabilize water protection dams, prevent runoff containing pollutants from landfills, facilitate the revegetation of slopes at risk of erosion, and even make asphalt layers of roads thinner. Until now, textiles made of highly resistant synthetic fibers have been used for this purpose, which have a very long lifetime. For some applications, however, it would not only be sufficient but even desirable for the auxiliary textile to degrade in the soil when it has done its job. Environmentally friendly natural fibers, on the other hand, often decompose too quickly. The German Institutes of Textile and Fiber Research Denkendorf (DITF) are developing a bio-based protective coating that extends their service life.

Textiles are a given in civil engineering: they stabilize water protection dams, prevent runoff containing pollutants from landfills, facilitate the revegetation of slopes at risk of erosion, and even make asphalt layers of roads thinner. Until now, textiles made of highly resistant synthetic fibers have been used for this purpose, which have a very long lifetime. For some applications, however, it would not only be sufficient but even desirable for the auxiliary textile to degrade in the soil when it has done its job. Environmentally friendly natural fibers, on the other hand, often decompose too quickly. The German Institutes of Textile and Fiber Research Denkendorf (DITF) are developing a bio-based protective coating that extends their service life.

Depending on humidity and temperature, natural fiber materials can degrade in the soil in a matter of months or even a few days. In order to significantly extend the degradation time and make them suitable for geotextiles, the Denkendorf team researches a protective coating. This coating, based on lignin, is itself biodegradable and does not generate microplastics in the soil. Lignin is indeed biodegradable, but this degradation takes a very long time in nature.

Together with cellulose, Lignin forms the building materials for wood and is the "glue" in wood that holds this composite material together. In paper production, usually only the cellulose is used, so lignin is produced in large quantities as a waste material. So-called kraft lignin remains as a fusible material. Textile production can deal well with thermoplastic materials. All in all, this is a good prerequisite for taking a closer look at lignin as a protective coating for geotextiles.

Lignin is brittle by nature. Therefore, it is necessary to blend the kraft lignin with softer biomaterials. These new biopolymer compounds of brittle kraft lignin and softer biopolymers were applied to yarns and textile surfaces in the research project via adapted coating systems. For this purpose, for example, cotton yarns were coated with lignin at different application rates and evaluated. Biodegradation testing was carried out using soil burial tests both in a climatic chamber with temperature and humidity defined precisely according to the standard and outdoors under real environmental conditions. With positive results: the service life of textiles made of natural fibers can be extended by many factors with a lignin coating: The thicker the protective coating, the longer the protection lasts. In the outdoor tests, the lignin coating was still completely intact even after about 160 days of burial.

Textile materials coated with lignin enable sustainable applications. For example, they have an adjustable and sufficiently long service life for certain geotextile applications. In addition, they are still biodegradable and can replace previously used synthetic materials in some applications, such as revegetation of trench and stream banks.

Thus, lignin-coated textiles have the potential to significantly reduce the carbon footprint: They reduce dependence on petroleum-based products and avoid the formation of microplastics in the soil.

Further research is needed to establish lignin, which was previously a waste material, as a new valuable material in industrial manufacturing processes in the textile industry.

The research work was supported by the Baden-Württemberg Ministry of Food, Rural Areas and Consumer Protection as part of the Baden-Württemberg State Strategy for a Sustainable Bioeconomy.

Source:

Deutsche Institute für Textil- und Faserforschung Denkendorf (DITF)

Winners of AVK Innovation Award 2023 (c) AVK
Winners of AVK Innovation Award 2023
25.10.2023

Winners of AVK Innovation Award 2023

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

Third place: “High Performance Recycled Carbon Fibre Materials (HiPeR)” – Composites Technology Center GmbH (CTC GmbH), partners: Faserinstitut Bremen e. V, Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; partners Japan: Faserinstitut Bremen e.V., Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; Partner Japan: CFRI Carbon Fiber Recycle Industry Co., Ltd., IHI Logistics and Machinery Corporation, ICC Kanazawa Institute of Technology

Innovative Processes & Methods category
First place: “Chopped Fibre Direct Processing (CFP)” – KraussMaffei Technologies GmbH, partner: Wirthwein SE

Second place: “CIRC - Complete Inhouse Recycling of Thermoplastic Compounds” – Fraunhofer Institute for Production Engineering and Automation (IPA), partners: Schindler Handhabetechnik GmbH, Vision & Control GmbH

Third place: “CarboScreen – Sensor-Based Monitoring of Carbon-Fibre Production” – CarboScreen GmbH, partner: Institute of Textile Technology at RWTH Aachen University

Research & Science category
First place: “Development of a Stereocomplex PLA Blend on a Pilot Plant Scale” – Faserinstitut Bremen e. V.

Second place: “Fibre-Reinforced Salt as a Robust Lost Core Material” – Technical University of Munich, Chair of Carbon Composites, partners: Apppex GmbH, Haas Metallguss GmbH

Third place: “VliesSMC – Recycled Carbon Fibres with a Second Life in the SMC Process” – Sächsisches Textilforschungsinstitut e.V. (STFI), partner: Fraunhofer Institute for Chemical Technology (ICT)

 

Entries for the next Innovation Award 2024 can be submitted from January 2024 onwards.

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V.

12.10.2023

STFI auf der A+A 2023 in Düsseldorf

Das STFI präsentiert sich vom 24. bis 27. Oktober 2023 mit eigenem Messestand auf der A+A vor Ort. Experten rund um Hendrik Beier, den Leiter der Zertifizierungsstelle PSA (CE 0516), informieren zu Schutzkleidung sowie Produktnormen.

Mit Erfahrung und Kompetenz in der Prüfung und Zertifizierung Persönlicher Schutzausrüstung (PSA) unterstützt das STFI einen wichtigen Bestandteil für die Marktbereitstellung von Schutzkleidung. Die Prüf- und Zertifizierungsstelle des STFI bietet ein breites Spektrum an Dienstleistungen im Bereich textiler PSA. Sowohl für Schutzkleidung gegen Hitze und Flammen gemäß EN ISO 11612 als auch für Schutzkleidung zum Schweißen und verwandte Verfahren nach EN ISO 11611 bietet das sächsische Institut alle Prüfverfahren aus einer Hand. Auch die Prüfung und Bewertung von Schutztextilien gegen die thermischen Risiken elektrischer Störlichtbogen gehört zum Portfolio der Prüf- und Zertifizierungsstelle.

Das STFI präsentiert sich vom 24. bis 27. Oktober 2023 mit eigenem Messestand auf der A+A vor Ort. Experten rund um Hendrik Beier, den Leiter der Zertifizierungsstelle PSA (CE 0516), informieren zu Schutzkleidung sowie Produktnormen.

Mit Erfahrung und Kompetenz in der Prüfung und Zertifizierung Persönlicher Schutzausrüstung (PSA) unterstützt das STFI einen wichtigen Bestandteil für die Marktbereitstellung von Schutzkleidung. Die Prüf- und Zertifizierungsstelle des STFI bietet ein breites Spektrum an Dienstleistungen im Bereich textiler PSA. Sowohl für Schutzkleidung gegen Hitze und Flammen gemäß EN ISO 11612 als auch für Schutzkleidung zum Schweißen und verwandte Verfahren nach EN ISO 11611 bietet das sächsische Institut alle Prüfverfahren aus einer Hand. Auch die Prüfung und Bewertung von Schutztextilien gegen die thermischen Risiken elektrischer Störlichtbogen gehört zum Portfolio der Prüf- und Zertifizierungsstelle.

Von der Verfahrensentwicklung bis zur internationalen Normung tragen die Fachleute dazu bei, die Arbeit im Bereich elektrischer Anlagen sicherer machen. Für die Bewertung elektrostatisch ableitfähiger Schutzkleidung beschäftigen sich die Experten des STFI neben der Prüfung und Zertifizierung intensiv mit der Erforschung elektrostatischer Phänomene und der daraus abgeleiteten Entwicklung geeigneter Prüfverfahren. Wurde bereits vor vielen Jahren die EN 1149-3 als europaweit harmonisierter Prüfstandard für Textilien mit eingebauten leitfähigen Fasersystemen maßgeblich im Institut entwickelt, arbeiten die Spezialisten heute an Methoden zur Prüfung und Bewertung kompletter Kleidungssysteme.

More information:
STFI A+A
Source:

Sächsisches Textilforschungsinstitut e.V.

Frankfurt Skyline Foto Tobias Rehbein, Pixabay
10.10.2023

6. Symposium ADDITIVE FERTIGUNG in der Textilindustrie

Am 8. November 2023 findet das 6. Symposium ADDITIVE FERTIGUNG in der Textilindustrie in Frankfurt für Interessierte aus Textilindustrie, Kunststoffverarbeitung, Forschung und Praxis statt. Neue Materialien, innovative Fertigungstechnologien und zukunftsweisende Anwendungen sind Themen der Vorträge aus Wissenschaft und Wirtschaft.

Das Programm umfasst die neuesten Entwicklungen beim thermoplastischen Fused Layer Modeling, dem Druck mittels Dispenser oder Siebdruck sowie Materialien und Technologien für Schutzanwendungen und Architektur. Ergänzt werden die Vorträge durch eine begleitende Fachausstellung, auf der Unternehmen, die bereits mit additiven Fertigungs-verfahren arbeiten, ihre Produkte und Dienstleistungen präsentieren.

Veranstalter des Symposiums sind KARL MAYER STOLL R&D GmbH, das Textilforschungsinstitut Thüringen Vogtland e. V. (TITV Greiz) und das Sächsische Textilforschungsinstitut e.V. (STFI).

Am 8. November 2023 findet das 6. Symposium ADDITIVE FERTIGUNG in der Textilindustrie in Frankfurt für Interessierte aus Textilindustrie, Kunststoffverarbeitung, Forschung und Praxis statt. Neue Materialien, innovative Fertigungstechnologien und zukunftsweisende Anwendungen sind Themen der Vorträge aus Wissenschaft und Wirtschaft.

Das Programm umfasst die neuesten Entwicklungen beim thermoplastischen Fused Layer Modeling, dem Druck mittels Dispenser oder Siebdruck sowie Materialien und Technologien für Schutzanwendungen und Architektur. Ergänzt werden die Vorträge durch eine begleitende Fachausstellung, auf der Unternehmen, die bereits mit additiven Fertigungs-verfahren arbeiten, ihre Produkte und Dienstleistungen präsentieren.

Veranstalter des Symposiums sind KARL MAYER STOLL R&D GmbH, das Textilforschungsinstitut Thüringen Vogtland e. V. (TITV Greiz) und das Sächsische Textilforschungsinstitut e.V. (STFI).

Das Symposium ist eingebettet in die internationale Fachmesse für additive Fertigungstechnologien Formnext, der Branchenplattform für Additive Fertigung und industriellen 3D-Druck. Dank einer Vereinbarung der Veranstalter erhalten Teilnehmende des Symposiums den 4-Tage Expo Pass zur Formnext vom 7. - 10. November 2023.

Veranstaltungsort: Messe Frankfurt GmbH, Portalhaus, Ebene VIA, Raum Frequenz 2, Ludwig-Erhard-Anlage 1, 60327 Frankfurt am Main

Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

11.09.2023

Project and technology study: Trends and Design Factors for Hydrogen Pressure Vessels

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.


AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.


AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

The AZL team, renowned for its high reputation in providing market and technology insights as well as developing component and production concepts in the format of Joint Partner Projects seeks for companies along the whole composite value chain interested in further developing their application know how in this economically highly relevant field.

The project will provide an in depth exploration of market insights, regulatory standards, and intellectual property landscapes. Beyond this, there is a dedicated focus on staying updated with state of the art and advancements in design, materials, and man ufacturing techniques.

An integral component of the project involves the creation of reference designs by AZL´s engineering team. The reference designs will encompass a variety of pressure vessel configurations and will consider a diverse range of materials and production concep ts.

With the scheduled project start in October 2023, and a project timeline of approximately nine months, AZL encourages companies active across the composite value chain to participate. Companies interested in participating or seeking further information should reach out directly to the AZL expert team.

Source:

Aachener Zentrum für integrativen Leichtbau

25.08.2023

Exist research transfer project FoxCore successfully launched

The FoxCore founding team and the ITM at TU Dresden aim to usher in a new era for fastening solutions in lightweight construction with the start of the Exist research transfer project FoxCore. The project started on June 1, 2023, and will run until November 30, 2024, with support from the German Federal Ministry of Economics and Climate Protection (BMWK) and the European Social Fund (ESF).

The innovative company is to develop and offer new and customer-oriented fastening solutions for lightweight construction applications. Safety and performance of lightweight solutions in various industries are to be increased. FoxCore's objective is to take a leading role in fastening technology.

Daniel Weise, Philipp Schegner, Michael Vorhof and Cornelia Sennewald form the FoxCore team; they will work closely with the Institute of Textile Machinery and Textile High Performance Materials (ITM) at TU Dresden. Together, they will develop optimal manufacturing technologies and establish a widespread network of customers and suppliers.

The FoxCore founding team and the ITM at TU Dresden aim to usher in a new era for fastening solutions in lightweight construction with the start of the Exist research transfer project FoxCore. The project started on June 1, 2023, and will run until November 30, 2024, with support from the German Federal Ministry of Economics and Climate Protection (BMWK) and the European Social Fund (ESF).

The innovative company is to develop and offer new and customer-oriented fastening solutions for lightweight construction applications. Safety and performance of lightweight solutions in various industries are to be increased. FoxCore's objective is to take a leading role in fastening technology.

Daniel Weise, Philipp Schegner, Michael Vorhof and Cornelia Sennewald form the FoxCore team; they will work closely with the Institute of Textile Machinery and Textile High Performance Materials (ITM) at TU Dresden. Together, they will develop optimal manufacturing technologies and establish a widespread network of customers and suppliers.

Source:

Institute of Textile Machinery and High Performance Material Technology (ITM)
TU Dresden

Grafik Sächsisches Textilforschungsinstitut e.V. (STFI)
22.08.2023

Sächsische Textilbranche wirbt um Quereinsteiger beim Frühstück

STFI Akademie-Frühstück informiert Textilbranche am 23. August 2023. Neue Wege für die textile Fachkräftequalifizierung.

Derzeit arbeiten in Deutschland rund 120.000 Menschen für 1.400 Unternehmen in der Textilbranche, in Sachsen sind es ca. 12.000 Mitarbeitende. Längst ist auch die Textilbranche vom Fachkräftemangel betroffen und sucht nach Lösungen.

Erneut wird ein Verlust an Fachwissen befürchtet. Wechselten in längerer Vergangenheit gut ausgebildete Fachkräfte in andere Berufe, steht heute die Babyboomergeneration vor der Pensionierung. Diese Lücke sollen vermehrt Quereinsteiger schließen. Nun gilt es für Unternehmen Fachwissen zu bewahren und an die Quereinsteiger weiterzugeben, um weiterhin fortschrittlich und innovationsorientiert am Markt agieren zu können.

Am 23. August 2023 bringt das STFI Ansprechpartner der IHK und der Agentur für Arbeit und Unternehmen der Textilbranche an einen Tisch zum ersten STFI-Akademie-Frühstück, um sich mit den Akteuren über Chancen für hervorragend qualifizierten Fachkräfte von morgen auszutauschen.

STFI Akademie-Frühstück informiert Textilbranche am 23. August 2023. Neue Wege für die textile Fachkräftequalifizierung.

Derzeit arbeiten in Deutschland rund 120.000 Menschen für 1.400 Unternehmen in der Textilbranche, in Sachsen sind es ca. 12.000 Mitarbeitende. Längst ist auch die Textilbranche vom Fachkräftemangel betroffen und sucht nach Lösungen.

Erneut wird ein Verlust an Fachwissen befürchtet. Wechselten in längerer Vergangenheit gut ausgebildete Fachkräfte in andere Berufe, steht heute die Babyboomergeneration vor der Pensionierung. Diese Lücke sollen vermehrt Quereinsteiger schließen. Nun gilt es für Unternehmen Fachwissen zu bewahren und an die Quereinsteiger weiterzugeben, um weiterhin fortschrittlich und innovationsorientiert am Markt agieren zu können.

Am 23. August 2023 bringt das STFI Ansprechpartner der IHK und der Agentur für Arbeit und Unternehmen der Textilbranche an einen Tisch zum ersten STFI-Akademie-Frühstück, um sich mit den Akteuren über Chancen für hervorragend qualifizierten Fachkräfte von morgen auszutauschen.

Nico Teutsch, Geschäftsführer der OTEX Textilveredlung GmbH, Flöha, wird von seinen Erfahrungen rund um die Qualifizierung von Quereinsteigern berichten. Die OTEX Textilveredlung GmbH in Flöha fördert ihre mittlerweile 110 Mitarbeiter seit einigen Jahren gezielt und schöpft so aus einem profunden Erfahrungsschatz zur Fachkräftequalifizierung und Personalentwicklung.

Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)