From the Sector

The REACH4texiles project just kicked off. Funded by the European Commission, it aims at exploring solutions for fair and effective market surveillance on textile products.

Every year, about 28 billion of garments circulate across Europe, 80% of which are imported from outside the EU and its jurisdiction.
 
Inevitably, such huge volumes pose enormous challenges for market surveillance authorities which are called to ensure that uncompliant dangerous products are kept away from the EU citizens.

The European Union has the world most comprehensive chemical legislation which is set to protect consumers, the environment and, theoretically, even the competitiveness  of the business.

Such EU chemical legislation evolves constantly, increasing scope and ambition. New restrictions impact authorities and sectors like the European textile value chain and generate new costs for all actors.

Evidence suggests that such advanced regulatory framework is not completed with an equally advanced or effective EU-wide control system capable of ensuring compliance, especially in the case of imported products.

The REACH4texiles project aims at exploring solutions for fair and effective market surveillance on textile products; it pools together the key actors to address three objectives:

• Keep non-compliant products away from the single market.
• Increase skills and knowledge.
• Support a Network addressing chemicals in textiles and applying the EU regulation 2019/1020

The 2 years project will share best practices, identify efficient approaches against non-compliant products, offer training and support for a more effective surveillance and for level playing field.

The project welcomes collaboration with concerned authorities across the EU Member States.

Details:

A well-functioning EU market surveillance system is an essential prerequisite to protect citizen, the environment and competitiveness of responsible business. When it comes to textiles, the broad range of products, the large set of REACH subjected chemicals used in textiles as well as industrial strategies like fast fashion make this a challenging task.

Challenges may include lack of resources, difficulties in identifying higher risk products, cost and management of chemical tests, lack of test methods and knowledge of best practices. These challenges are yet likely to increase with the upcoming REACH restrictions and the growth of e-commerce.

Because of this, products that do not comply with REACH regulations encounter today little or no barriers to enter the market. This creates not only a health risk for Europeans but also undermines the competitivity of responsible businesses that take all necessary measures to comply with these regulations.

Addressing the challenges requires more knowledge at market surveillance and stronger collaboration between these authorities, the textile and clothing industry and testing laboratories. More knowledge about the identification of risk baring textile products and REACH chemicals likely to be used in these products, suitable test methods and strategies such as fast screening on REACH chemicals, trustworthiness of labels, etc can increase the effectiveness of market surveillance considerably.

The REACH4Textiles first objective (keep non-compliant products away from the EU Market) will be pursued by increasing knowledge on market surveillance functioning by and working on a risk-based approach to identify products at higher risk.

The second objective supports a network to address the specificities of chemicals in textiles with market surveillance authorities and involving other relevant stakeholders. The third objective focuses on sharing knowledge with market surveillance actors on textile products and suitable test methodologies.

Supported by the European Commission DG Growth, the project team is coordinated by the Belgian test and research center Centexbel and include the European Textiles and Apparel industry confederation, EURATEX, the German national textile and fashion association Textile und Mode, t+m, the Italian association Tessile e Salute. Several other European industry associations and national authorities are welcomed to become involved through the project activities.   

A sector alliance that was formed to tackle issues relating to microplastics has completed the next phase of its project to develop a harmonised industry standard for the supply chain. The Cross Industry Agreement (CIA) has revealed the results of a fibre fragmentation trial that has been carried out in advance of establishing a CEN Standard (from the European Committee for Standardization). Once confirmed, the standard will also become an ISO standard under the Vienna Agreement, providing apparel manufacturers and policy makers with a vital tool as part of wider work to reduce microfibre shedding into the environment.

In 2018, five industry organisations agreed to join forces to proactively tackle the issue of microplastics, and signed the Cross Industry Agreement. The initial signatories were European industry associations that represent the European and global value chains of garments and their associated maintenance – the International Association for Soaps, Detergents and Maintenance Products (A.I.S.E.), European Man-Made Fibres Association (CIRFS), European Outdoor Group (EOG), EURATEX the European apparel and textile industry confederation, and the Federation of the European Sporting goods Industry (FESI). Together, the five organisations understood that the very first step to enable global action around the topic, was to agree a harmonised test method which would allow the collection and comparison of globally generated data, to aid the identification of solutions.

The microfibre shedding test method was developed thanks to the joint efforts and cooperation of experts from 28 European, American and Asian organisations; the result was handed over to CEN in 2020. Since then, representatives from the CIA have been working with CEN to fine tune details in order to meet the requirements for a CEN Standard. To verify the reproducibility of the method, the partners have carried out a round robin trial (RRT) to determine if the method could be replicated in different laboratories and produce similar results. 10 organisations participated in the RRT, which was co-ordinated by the CIA, sending fabric samples to all of the laboratories involved and then collecting and analysing the data.

The results from the RRT show statistically significant consistency, both within and between participating laboratories, which demonstrates that the method is both repeatable in the same setting and reproducible in other laboratories.

The CIA has submitted the results of the RRT to CEN, with the intention that the CEN Standard is confirmed in the near future. Once that has happened, it will be promoted throughout the apparel industry and will become a key tool for researchers, businesses and governments as they accelerate efforts to reduce microfibre shedding associated with garment production.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, and SABIC, a global leader in the chemical industry, announced a collaboration to create recycled-based Dyneema®. Through a joint pilot with multiple CirculariTeam® members, the manufacturing and usage of Dyneema® using mixed plastic waste as feedstock (via mass balance approach) will be successfully demonstrated. It is an important step toward the future goal of fully closing the loop by delivering Dyneema® made from ultra-high molecular weight polyethylene (UHMwPE) waste. This collaboration underlines DSM’s and SABIC’s efforts to accelerate a circular economy for materials.

By working together with members of CirculariTeam®, DSM will produce recycled-based Dyneema® made using SABIC’s certified circular ethylene as a pilot project in both a sailing rope and a pelagic trawl net application. The circular ethylene, from SABIC’s TRUCIRCLE™ portfolio, uses mixed plastic waste as feedstock (mass balance approach), which not only contributes to preventing valuable plastic from becoming waste and the avoidance of carbon emissions compared to incineration, but it will also help preserve fossil resources. These pilots are an important early-stage milestone in the journey toward making fully circular Dyneema® from HMPE post-production and post-consumer waste.

Jon Mitchell, Managing Director at Marlow Ropes: “We’re proud to be one of the first manufacturers to integrate recycled-based Dyneema® within our products and demonstrate the material’s feasibility. By collaborating with materials science pioneers such as DSM and SABIC, we are able to create products that not only deliver superlative functional performance but also have a lower environmental impact. Our products are trialed and tested by professional offshore sailing teams including 11th Hour Racing Team, a proud partner of ours at Marlow, with whom we share a progressive approach to seeking sustainable solutions: no more business as usual."

Klaus Walther, Managing Director at Gleistein: “Warm congratulations to DSM and SABIC for pushing the boundaries of science to deliver a truly unique product. We’re proud that our ropes can be produced from what once was typical household plastic waste. This is an important stepping stone towards becoming circular. It will enable our customer Maritiem BV to further develop high-tech fishing gear whilst contributing to the circular economy. Not to forget Cornelis Vrolijk Fishing Company, who again illustrate their commitment to Corporate Social Responsibility by introducing this concept in fishery.”

To ensure product protection and prevent brand piracy, GRAFE has developed a simple and elegant solution that also offers a high level of security. The basis is special markers. "The highly complex pigments with special physical properties designed for this purpose are used in minute quantities within the plastic matrix. With an appropriately calibrated detector, products equipped with them can thus be read and authenticated," explains Business Development Manager Florian Ludwig. At the same time no changes in properties can usually be observed. The detectors can use an LED display to check within seconds whether the unique marker is contained in the product and whether this item is the original product.

In general, there are two options: x ray and light fluorescence, i.e. fluorescent X-rays or light. With the first option, the base color has no influence (not even black) and the customer benefits from low addition dosage and batch price, but this method requires higher investment. "With light fluorescence, on the other hand, detection is done by a measuring device, which is preconfigured by our partner or by us directly. Different types are available, from handy hand-held measuring devices to stationary office solutions to inline spectrometers, in order to have a control take place directly during production," Ludwig explains. With this method, the masterbatch dosage is based on the base color, among otherv things. The method of operation is fast and simple, and the necessary investment is also manageable.

From injection molding and extrusion to transparent and fiber applications, almost all areas of plastics processing come into question.

• Textile Exchange report shows growth of preferred fiber and materials market needs to be accelerated
• With post-pandemic fiber production increasing, the transition to preferred fibers and materials must be a non-negotiable decision, notes Textile Exchange.

According to a new Textile Exchange report, the market share for preferred fiber and materials grew significantly in 2020. The Preferred Fiber and Materials Market Report 2021 outlines the market for plant fibers such as cotton, hemp, and linen; animal fibers and materials such as wool, mohair, cashmere, alpaca, down, silk, and leather; manmade cellulosics (MMCFs) such as viscose, lyocell, modal, acetate, and cupro; as well as synthetics such as polyester, polyamide, and more.

The report is a unique annual publication about global fiber and materials production, availability, and trends, including those associated with improved social and environmental impacts, referred to as ”preferred.” The comprehensive report includes quantitative data, industry updates, trend analysis and inspiring insights into the work of leading companies and organizations as they create material change.

The results show that between 2019 and 2020 the market share of preferred cotton increased from 24 to 30 percent and recycled polyester from 13.7 to 14.7 percent. Preferred cashmere increased from 0.8 to 7 percent of all cashmere produced while Responsible Mohair Standard certified fiber expanded from 0 to 27 percent of all mohair produced worldwide in its first year of existence in 2020. The market share of FSC and/or PEFC certified MMCFs increased to approximately 55-60 percent. While the market share of recycled MMCFs is only 0.4 percent, it is expected to increase significantly in the following years.

Brands’ increased interest in the use of preferred fibers and materials was also demonstrated by 75 percent increase in the total number of facilities (to 30,000) around the world becoming certified to the organization’s portfolio of standards in 2020. However, the report also notes that despite the increase, preferred fibers only represent less than one-fifth of the global fiber market. Less than 0.5 percent of the global fiber market was from pre- and post-consumer recycled textiles.

Indeed, global fiber production has almost doubled in the last 20 years from 58 million tonnes in 2000 to 109 million tonnes in 2020. While it is not yet clear how the pandemic and other factors will impact future development, global fiber production is expected to increase by another 34 percent to 146 million tonnes in 2030 if the industry builds back business as usual. If this growth continues, it will be increasingly difficult for the industry to meet science-based targets for climate and nature.

Textile Exchange aims to be the driving force for urgent climate action, and its Climate+ strategy calling for the textile industry to reduce greenhouse gas emissions by 45 percent by 2030 compared to a 2019 baseline in the pre-spinning phase of textile fiber and materials production, while also addressing other impact areas interconnected with climate such as water, biodiversity, and soil health.

• Röhm will be presenting the new PLEXIGLAS® Optical HT special molding compound for increased continuous service temperatures, as well as other products for various application areas
• Highlight: PLEXIGLAS® molding compounds for innovative design of vehicles, luminaires and household appliances

The transition in the automotive industry towards electric vehicles is heralding a change in the design language, just like LEDs did for luminaires. Material manufacturers are adapting to these new conditions and are developing custom materials for the respective applications. Between October 12 and 16, the Molding Compounds business unit will be demonstrating how design elements can be combined with a range of functions at the Fakuma 2021 trade fair in Friedrichshafen.

PLEXIGLAS® molding compounds have proven their worth in many fields of application – from the automotive and lighting industries to the electronics and household appliance sectors.

The brand polymethyl methacrylate (PMMA) from Röhm is an extremely diverse plastic that offers great design freedom and boasts great light-guiding properties. At the same time, it impresses with its low weight and easy to mold and process. The material also stands out thanks to its UV and weather resistance and its resulting durability. At Fakuma 2021, Röhm will be showcasing the material’s versatile properties and present its extensive portfolio based on various application examples of PLEXIGLAS® molding compounds.

• The National Council of Textile Organizations (NCTO) Welcomes Senate Passage of Infrastructure Bill

WASHINGTON—The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished products, issued a statement today welcoming Senate passage of a bipartisan infrastructure bill that will provide billions of dollars in new spending to revitalize the nation’s roads, bridges and railways and help reconstitute a domestic supply chain for personal protective equipment (PPE).

“We commend the Senate for passing the bipartisan infrastructure bill, which will provide critical resources for our nation’s aging infrastructure and at the same time help incentivize the reshoring of personal protective equipment (PPE) production, an important priority of the U.S. textile industry,” said NCTO President and CEO Kim Glas.

NCTO worked with congressional allies to include a version of the Make PPE in America Act, legislation co-sponsored by Senator Rob Portman (R-OH) and Senator Gary Peters (D-MI), in the infrastructure legislative package. The bill ensures all PPE purchased by the Departments of Homeland Security, Health and Human Services and Veterans Affairs are Berry Amendment-compliant; guarantees long-term contracts (a minimum of two years) to U.S. manufacturers; and creates a tiered preference for PPE made in the Western Hemisphere by our free trade partners using U.S. components, after domestic manufacturing capacity has been maximized.

“We sincerely thank Senator Portman and Senator Peters for working to include their Make PPE in America Act in the infrastructure bill,” Glas said. “This bill will help onshore critical production of personal protective equipment (PPE) by guaranteeing long-term contracts for domestically produced PPE and ensuring that taxpayer dollars are utilized to bolster the federal purchase of American-made PPE.

The U.S. manufacturing industry has produced over a billion lifesaving PPE and other medical products over the last year, as NCTO members retooled production chains in response to the nation’s needs. We will continue to urge the government to purchase Berry-compliant products containing 100 percent domestic content for PPE to help bolster the full U.S. production chain in the future.”

Officina+39, an Italian company specialized in research and chemical application in the textile and fashion sector, has joined the BLUESIGN's network of chemical excellences.

This landmark confirms a longstanding pledge to minimize environmental impacts by envisioning and developing forefront solutions and technologies that reduce the use of energy and hazardous chemicals, while increasing waste recycling and water conservation. Together with the high-profile players involved who share BLUESIGN’s purposes, the company will work to ensure a responsible use of resources and to guarantee the highest possible degree of consumer protection.

Eager to constantly grow and improve, Officina+39 has recently extended its commitment to innovation to its own Headquarters too, by moving to a brand new facility in Biella (Italy).

INDA, the Association of the Nonwoven Fabrics Industry, wrapped up its 15th annual World of Wipes® International Conference, July 12-15, with a presentation of the World of Wipes Innovation Award® to Kimberly-Clark Corporation and the highest attendance record in six years.

This year’s WOW conference welcomed 475 enthusiastic professionals from 14 countries to its in-person World of Wipes® (WOW) International Conference to advance their wipes business. Held in Atlanta, GA, the conference was notable as the first in-person conference in the nonwovens and engineered fabrics industry in 500 days due to the pandemic.

Industry professionals from 33 global companies delivered presentations and answered questions in sessions that included Wipes and the Growing Plastics Debate, Regulatory Requirements for Disinfecting and Sanitizing Wipes, Trends in the Wipes Markets and Among Consumers, Wet Wipe Preservative Innovations, Covid-19 Impacts on Wipes Consumption and Cleaning Habits, Sustainable Wipes Packaging and Dispensing, Nonwoven Substrates for More Sustainable Wipes, and Flushable Wipes: Loved by Consumers, Wrongly Accused by Utilities.

Highlights included the announcement of Kimberly-Clark Scott® 24-Hour Sanitizing Wipes as the winner of this year’s World of Wipes Innovation Award®. The annual award recognizes the product that most expands the use of nonwovens and demonstrates creativity, novelty, uniqueness, and technical sophistication within the entire nonwovens wipes value chain.

Other highlights included the presentation of the 2021 INDA Lifetime Technical Achievement Award to John Poccia. The annual award is nominated by INDA’s Technical Advisory Board and presented to an individual whose technical achievements over a long-standing career have significantly contributed to the technical advancement, success, and growth of the nonwovens industry.

Other presentation highlights included:

• Recent Developments Under the EU Green Deal and Plastics Strategy – Pandemic Update – Gyongyi David, Attorney at Law, V V G B Advocaten-Avocats, Director- EHS Regulatory, Steptoe & Johnson LLP
• FDA & EPA Framework of Regulations: Dry Wipes Claims – Tony Herber, Principal Regulatory Consultant/Assistant Federal Team Manager, Scientific & Regulatory Consultants, Inc. (SRC. Inc.)
• Consumer Wipes Usage During Covid-19 and Future Use – Chris Dresselhuys, Business Director-North American Retail Wipes, Rockline Industries
• Sustainable Solutions for Wipes – Vishal Bansai, Vice President, Innovation, and Silke Brand-Kirsch, VP, Marketing and Business Development, Glatfelter Gernsbach GmbH
• Sustainability Impacts Across the Value Chain of Wipes Packaging – Vicky Chang, Marketing Manager, Consumer & Industrial Products, Amcor Flexibles
• Unveiling Wet Wipes Preservation: New Findings on Microbial Risks and Preservative Solution – Paul Salama, Ph.D., CTO& Head of Innovation, Sharon Laboratories

FIMAST 2021, Italian Exhibition Group’s much-awaited B2B trade show event dedicated to the entire hosiery industry, scheduled to take place, with physical attendance, at the Brixia Forum in Brescia from 19th to 22nd October 2021.  
 
FIMAST is “setting off” on a new development route for the trade show which will focus on responsible and sustainable innovation along the supply chain it represents. The first steps in this direction include activating a top-level partnership with the ecohub C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy) and constant dialogue with the sector’s global players.

For the full programme of initiatives: www.fimast.eu