From the Sector

Reset
03.10.2024

Italian textile machinery industry at ITMA ASIA + CITME 2024

About 50 Italian companies will exhibit at ITMA ASIA + CITME 2024, taking place from October 14 to 18 in Shanghai. With an area of around 1,400 square meters, Italy ranks among the top exhibiting countries, as in previous editions. 29 Italian exhibitors will show their innovations within the National Sector Groups, organized by ACIMIT (Association of Italian Textile Machinery Manufacturers) and Italian Trade Agency.

ITMA ASIA + CITME show has always been the main showcase for textile machinery manufacturers in Asia, that absorbs over 50% of global exports. Moreover China is the world’s largest market in the sector (the value of imported textile machinery in 2023 was around 2.6 billion euro).

For Italian manufacturers as well, the Chinese market is the top foreign destination. In 2023, Italian sales to China amounted to 222 million euro. In the first six months of this year, exports to China increased by 38%, while the performance of total Italian exports declined slightly in the same period.

About 50 Italian companies will exhibit at ITMA ASIA + CITME 2024, taking place from October 14 to 18 in Shanghai. With an area of around 1,400 square meters, Italy ranks among the top exhibiting countries, as in previous editions. 29 Italian exhibitors will show their innovations within the National Sector Groups, organized by ACIMIT (Association of Italian Textile Machinery Manufacturers) and Italian Trade Agency.

ITMA ASIA + CITME show has always been the main showcase for textile machinery manufacturers in Asia, that absorbs over 50% of global exports. Moreover China is the world’s largest market in the sector (the value of imported textile machinery in 2023 was around 2.6 billion euro).

For Italian manufacturers as well, the Chinese market is the top foreign destination. In 2023, Italian sales to China amounted to 222 million euro. In the first six months of this year, exports to China increased by 38%, while the performance of total Italian exports declined slightly in the same period.

“We hope that the recovery of the Chinese market, observed in this first half of the year, may be an early indication of a more general upturn in global demand for machinery,” says ACIMIT President Marco Salvadè. Over the past few years, demand from Chinese companies has turned to technologies that combine savings in production costs and environmental friendliness, as also demanded by brands and end consumers. “Today, Italian manufacturers can offer highly customized solutions that are particularly suited to making textile production more sustainable,” confirms Salvadè. “The Chinese textile machinery market is rapidly evolving, and the level of innovation in the technology requested has risen due to the growing international competition that even Chinese companies face. In Shanghai, Italian manufacturers will display their latest innovations, essential for making textile production more efficient and sustainable.”

More information:
ITMA Asia + CITME ACIMIT
Source:

ACIMIT

Award ceremony at Cinte (c) Dilo Systems GmbH
02.10.2024

DILO receives award for the new development “MicroPunch”

At this year's CINTE Techtextil fair in Shanghai, DILO received the innovation award for its intensive needling technology “MicroPunch”. Recent developments in energy costs, particularly for electricity and gas, and given the increasing shortage of water resources, have led to a shift in thinking over the past few years. Together with economic efficiency, the evaluation of the environmental impact of production has become increasingly important.

At this year's CINTE Techtextil fair in Shanghai, DILO received the innovation award for its intensive needling technology “MicroPunch”. Recent developments in energy costs, particularly for electricity and gas, and given the increasing shortage of water resources, have led to a shift in thinking over the past few years. Together with economic efficiency, the evaluation of the environmental impact of production has become increasingly important.

For DILO, this meant focusing on needling technology for the fine and lightweight nonwoven sector over the last years. The individual elements of the intensive needling technology underwent a complete revision. It became clear that the high production rates could only be achieved using the two-dimensional kinematics of the needle beam of "HyperPunch" or "CycloPunch." The necessary high feed rates of around 50 mm per stroke, coupled with the highest stitching densities to achieve good abrasion resistance, led to a need of a significant increase of the number of needles and needle density—almost doubling from approximately 20,000 needles/meter/board to around 45,000 needles/meter/board. It also became obvious that ensuring a high efficiency rate in production also required the careful attention to a quick assembly of the needle boards with needle modules. A completely new approach was needed in the design and construction of the needle boards to enable rapid module exchange and achieve a very high mechanical precision.

Previously, needling technology was primarily used for a surface weight range starting at 100 g/m² up to several kilograms per m². The expansion into the range below 100 g/m², and potentially down to 30 g/m², now completes the applicability of needling technology. The intensive needling technology "MicroPunch" opens up an economical field for a wide variety of lightweight nonwoven fabrics that can be produced by a pure mechanical processes. The product characteristics achieved, such as abrasion resistance, are comparable to those of hydroentangeld nonwovens. Needled fabrics tend to have more volume and more stretch while offering similar tensile strength values. These special quality characteristics are particularly interesting for applications in hygiene, medicine, cosmetics, and for technical products.

With this new development, the energy required to produce lightweight nonwoven fabrics has been reduced up to approximately 75% compared to other bonding technologies of this segment.

Source:

Dilo Systems GmbH

OUTLOOK24 Conference Photo Edana
01.10.2024

OUTLOOK24: Successful conference and exhibition

OUTLOOK™ 2024 took place on 24-26 September 2024 in Rome, gathering a record of 549 delegates from 212 companies and 37 countries across the nonwovens personal care, hygiene & wipes products value chain.

OUTLOOK24 Conference
The conference, structured across five key sessions, featured 26 speakers covering a diverse array of critical topics impacting not only the nonwovens industry but society at large. These topics included cutting-edge innovations and eco-design, evolving market dynamics, navigating new EU regulations, the future of absorbent hygiene products, sustainability, retail strategies, and the challenges posed by China's influence on European commerce.

The event's first day opened with a compelling presentation by Joachim De Vos, Managing Partner and Founder of Living Tomorrow & TomorrowLab. As an expert in strategic innovation and scenario planning, he shared valuable insights on guiding organizations towards future-readiness. He highlighted the emerging success factors, emphasizing how Generative AI can be leveraged to develop scenarios for the nonwovens industry, serving as a powerful roadmap for future innovation.

OUTLOOK™ 2024 took place on 24-26 September 2024 in Rome, gathering a record of 549 delegates from 212 companies and 37 countries across the nonwovens personal care, hygiene & wipes products value chain.

OUTLOOK24 Conference
The conference, structured across five key sessions, featured 26 speakers covering a diverse array of critical topics impacting not only the nonwovens industry but society at large. These topics included cutting-edge innovations and eco-design, evolving market dynamics, navigating new EU regulations, the future of absorbent hygiene products, sustainability, retail strategies, and the challenges posed by China's influence on European commerce.

The event's first day opened with a compelling presentation by Joachim De Vos, Managing Partner and Founder of Living Tomorrow & TomorrowLab. As an expert in strategic innovation and scenario planning, he shared valuable insights on guiding organizations towards future-readiness. He highlighted the emerging success factors, emphasizing how Generative AI can be leveraged to develop scenarios for the nonwovens industry, serving as a powerful roadmap for future innovation.

On the second day, James Kynge, the Europe-China correspondent for the Financial Times, delivered a keynote address., "The China Challenge", emphasizing China's rapid rise as a global tech superpower, noting that the country produced more than half of the world's robots last year. He explored the far-reaching impact of this growth on European commerce, highlighting the challenges and outlined strategies for European companies.

The final day of OUTLOOK™ Jack Stratten, Director of Insider Trends. highlighted in his presentation, “The polarization of choice: How retailers and brands are responding to market and product saturation,” in an unprecedented market saturation that leaves 64% of consumers feeling overwhelmed by choices. He discussed how massive retail platforms drive product saturation, influencing both quality and variety and concluded that differentiation in this crowded landscape occurs by focusing on high-quality, curated selections.

OUTLOOK24 Exhibition
As part of its commitment to fostering connections within the industry, OUTLOOK™ 2024 continued its tradition of offering extensive networking opportunities to its delegates. This year’s event featured a tabletop exhibition, where 20 companies had the chance to showcase their expertise over the 3 days.

The next edition of OUTLOOK™ will take place from 23-25 September 2025, in Budapest, Hungary at the Marriott Hotel, Budapest.

 

More information:
Edana outlook nonwovens
Source:

Edana

Drupa (c) Messe Düsseldorf / ctillmann
24.09.2024

drupa 2028 shortened to nine days

Staying true to its four-year cycle, drupa will be held again in May 2028, this time as a nine-day event. As the world’s leading platform for printing technology, the trade fair is adjusting to the changing needs and expectations of exhibitors and visitors and reflecting the continued transformation of the industry. The conceptual direction, new key visual and future claim of drupa 2028 will be presented to the industry in 2025.

Staying true to its four-year cycle, drupa will be held again in May 2028, this time as a nine-day event. As the world’s leading platform for printing technology, the trade fair is adjusting to the changing needs and expectations of exhibitors and visitors and reflecting the continued transformation of the industry. The conceptual direction, new key visual and future claim of drupa 2028 will be presented to the industry in 2025.

“drupa 2024 was more international than ever, and the positive atmosphere throughout the halls reflected our industry’s determination to drive profound change in order to make the printing and packaging industry more sustainable through automation, artificial intelligence and strategic partnerships. And these are exactly the kind of important goals that will continue to require a reliable platform such as drupa in future. What was also apparent, however, was that, as a B2B trade fair with a very high proportion of decision-makers from all over the world, the length of stays at drupa has become shorter. That’s why we want to facilitate trade fair visits with maximum efficiency”, Wolfram N. Diener, Chairman and CEO of Messe Düsseldorf, explains the decision. At this year’s drupa, 76 percent of visitors were part of top and middle management. “We believe that this adjustment is also confirmed by the experience we have gathered at our leading global trade fairs in the fields of machinery, plants and equipment, interpack and K, that address comparable customer profiles and do very well with a similar duration.”

The presentation of cutting-edge technology and machines in operation remains a USP of drupa. The new rules for trade fair duration will continue to allow exhibitors to effectively present and stage wide-ranging product portfolios, machines and workflows as well as an impressive stage programme.

More information:
drupa
Source:

Messe Düsseldorf

11.09.2024

SHIMA SEIKI at Garfab-TX Surat

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Indian sales representative Universal MEP Projects & Engineering Services, Ltd., will participate in the upcoming Garfab-TX Surat exhibition, an international trade show on embroidery apparel technology, fiber, yarn fabrics and accessories, to be held in Surat, India from 13th to 15th September 2024.

Surat is known as the textile hub of India, especially in terms of man-made fibers, and while it has been mainly an industrial center for wovens, there has been recent interest by manufacturers in the region to expand into new areas, including knitting.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Indian sales representative Universal MEP Projects & Engineering Services, Ltd., will participate in the upcoming Garfab-TX Surat exhibition, an international trade show on embroidery apparel technology, fiber, yarn fabrics and accessories, to be held in Surat, India from 13th to 15th September 2024.

Surat is known as the textile hub of India, especially in terms of man-made fibers, and while it has been mainly an industrial center for wovens, there has been recent interest by manufacturers in the region to expand into new areas, including knitting.

As inventor and pioneer of WHOLEGARMENT®, the company is exhibiting its MACH2®XS WHOLEGARMENT® knitting machine. Featuring 4 needle beds and SHIMA SEIKI’s original SlideNeedle™, MACH2®XS is capable of producing high-quality fine gauge WHOLEGARMENT® products in all needles. Representing the cutting edge in conventional shaped knitting is the N.SVR®123SP machine featuring a loop presser bed that permits inlay technique for producing hybrid fabrics with both knit and weave characteristics. N.SVR®123SP furthermore features i-Plating® inverse-plating capability for increased patterning capability, including the production of jacquard-like patterns in light-weight plain jersey stitch. Both machines feature such SHIMA SEIKI innovations as DSCS® Digital Stitch Control System (with “intelligence” on MACH2®XS), spring-type moveable sinker system, stitch presser, yarn gripper and cutter, and takedown comb.

SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will be available for demonstrations on the creative side of fashion, from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual sampling is a digitized version of sample making, accurate enough to be  used effectively as prototypes. By replacing physical samples, virtual samples reduce time, cost and material that otherwise go to waste. Digital prototyping using virtual samples on SDS®-ONE APEX4 help to digitally transform the fashion supply chain for realizing sustainable manufacturing. Simulations are available not only for flat knitting, but for weaving, pile weaving, circular knitting and embroidery as well.

Source:

SHIMA SEIKI MFG., LTD.

11.09.2024

KARL MAYER GROUP at ITMA ASIA + CITME 2024

Under the motto "Master the Change", the KARL MAYER GROUP presents innovations from its brands KARL MAYER, STOLL and KM.ON at to ITMA ASIA + CITME, from October 14 to 18, 2024. Visitors can expect an exhibition of solutions from the fields of mechanical engineering, digitalization, textile products, applications and customer support.

A range of warp knitting and flat knitting machines from the Group's product portfolio and textile trends will also be on display at an accompanying in-house show at KARL MAYER (CHINA). The event in Changzhou starts the day before the trade fair opens. One highlight will be the opening of the new showroom of the KARL MAYER subsidiary in China with solutions from all areas of technology.

 

Under the motto "Master the Change", the KARL MAYER GROUP presents innovations from its brands KARL MAYER, STOLL and KM.ON at to ITMA ASIA + CITME, from October 14 to 18, 2024. Visitors can expect an exhibition of solutions from the fields of mechanical engineering, digitalization, textile products, applications and customer support.

A range of warp knitting and flat knitting machines from the Group's product portfolio and textile trends will also be on display at an accompanying in-house show at KARL MAYER (CHINA). The event in Changzhou starts the day before the trade fair opens. One highlight will be the opening of the new showroom of the KARL MAYER subsidiary in China with solutions from all areas of technology.

 

Source:

Karl Mayer Group

Sixth edition of Texhibition Istanbul (c) Texhibition İstanbul
11.09.2024

Sixth edition of Texhibition Istanbul

The sixth edition of Texhibition Istanbul from 11 to 13 September 2024 will once again bring together all components of the textile industry and offer an overview of all product groups in the textile preliminary stage: from woven goods to knitwear, from yarns and denim to artificial leather and textile accessories.

Texhibition Istanbul Fabric and Textile Accessories Fair, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), is following on from this year's March event with the upcoming edition.

Highlights:

The sixth edition of Texhibition Istanbul from 11 to 13 September 2024 will once again bring together all components of the textile industry and offer an overview of all product groups in the textile preliminary stage: from woven goods to knitwear, from yarns and denim to artificial leather and textile accessories.

Texhibition Istanbul Fabric and Textile Accessories Fair, organised by İTKİB Fuarcılık A.Ş. in cooperation with the Istanbul Textile Exporters Association (İTHİB), is following on from this year's March event with the upcoming edition.

Highlights:

  • Over 500 exhibitors will be presenting a wide range of products such as woven fabrics, knitwear, denim, accessories, artificial leather and yarns covering 35,000 square metres
  • Over 25,000 trade visitors are expected from more than 100 countries, including the European Union, Great Britain, the USA, North Africa and the Middle East
  • Yarn Hall completes the range of the preliminary stage and has firmly established itself at Texhibition with 41 exhibitors
  • BlueBlackDenim showcases Türkiye's leading 25 denim manufacturers and inspires with creative denim installations
  • Texhibition Trend Areas: The trend areas are created by combination of quality and creative themes of fabrics, yarns, denims and accessory products from the participants
  • Texhibition Art Events: digital art, accessoires and yarn installations
More information:
Texhibition Istanbul
Source:

Texhibition İstanbul / JANDALI MODE.MEDIEN.MESSEN