From the Sector

Reset
62 results
Photo AWOL
25.09.2024

Monforts, Archroma and BW Converting’s Baldwin Technology - partnership in sustainable textile finishing

A collaboration that unites Monforts’ dyeing and finishing equipment, BW Converting’s Baldwin TexCoat G4™ digital spray technology and Archroma’s chemistries towards sustainable solutions is charting the course for the future of sustainable textile finishing.

Together, the three companies will support dyeing and finishing manufacturers, a critical part of the textile supply chain, in their development projects, boosting the quality and performance of their finished products, while at the same time maximizing the productivity and resource utilization of the finishing application process.  

Kicking off the partnership in the second half of this year, Monforts will install BW Converting’s full-width Baldwin TexCoat digital spray unit on a stenter frame at its Advanced Technology Center (ATC) at its headquarters in Mönchengladbach, Germany.

A collaboration that unites Monforts’ dyeing and finishing equipment, BW Converting’s Baldwin TexCoat G4™ digital spray technology and Archroma’s chemistries towards sustainable solutions is charting the course for the future of sustainable textile finishing.

Together, the three companies will support dyeing and finishing manufacturers, a critical part of the textile supply chain, in their development projects, boosting the quality and performance of their finished products, while at the same time maximizing the productivity and resource utilization of the finishing application process.  

Kicking off the partnership in the second half of this year, Monforts will install BW Converting’s full-width Baldwin TexCoat digital spray unit on a stenter frame at its Advanced Technology Center (ATC) at its headquarters in Mönchengladbach, Germany.

“Our ATC already houses two full Montex stenter finishing lines engineered to accommodate an extremely diverse range of processes, in addition to a Thermex range for the continuous dyeing of denim and other woven fabrics, a full color kitchen and a number of lab-scale systems for smaller batch trials,” explained Monforts Junior Technologist Saskia Kuhlen. “It enables our customers to test their own textiles and technical fabrics under fully confidential, real production conditions and using the results from these trials we are also able to make recommendations for improving many fabric finishes. The new TexCoat installation will make an important contribution to what we can achieve.”
 
TexCoat G4 revolutionizes the traditional water- and energy-intensive pad-dry-cure finishing process by precisely applying chemistry including softeners, antimicrobials, durable water repellents, flame retardants, resins and most other water-based chemicals across the textile surface only where it is required, on one or both sides of the fabric. The system can therefore reduce water, chemistry and energy consumption by up to 50% compared to traditional pad application processes.

The TexCoat G4 installation brings together the surface functions, fabric transport and thermal processing technology of Monforts stenter frames with Archroma’s specialty chemicals, applied with TexCoat’s contactless precision, to achieve optimum absorption and maximum efficacy, exceeding the performance of traditional pad applications.

“Archroma’s commitment to advancing sustainability solutions for technical textiles has led to a pivotal partnership with Baldwin, where the benefits of contactless precision spray combined with our innovative solutions have helped textile manufacturers achieve greater energy and water savings,” said Michael Schuhmann, Global Marketing Segment Manager for Technical Textiles, Archroma Textile Effects. “We are thrilled to take the partnership to the next level with the integration of a renowned equipment expert. Together, we will bring the best of our expertise in sustainable technologies to our customers around the world.”

“Baldwin has enjoyed a great relationship with Monforts and Archroma over the last few years,” added Rick Stanford, Baldwin’s Vice-President of Business Development for Textiles “Individually, we are working hard to assist our customers to achieve their sustainability and environmental targets but this is the first time the three companies have committed to working together with a focus on bringing transformative change to the dyeing and finishing space. It will result in significantly lower energy, chemical and water consumption with increased productivity and higher quality.  We strongly believe that this partnership will be greater than the sum of its parts.”

Beyond textile finishing, Monforts, Baldwin and Archroma will work together to develop a versatile offering that will include coloration concepts and in the not-too-distant future the partners additionally plan to expand their collaboration to continuous spray dye applications developed by Baldwin.

24.09.2024

Dow: New durable water repellent finishing with 81% bio-based emulsion

Dow has announced the launch of DOWSIL™ IE-9100 Emulsion for durable water repellent (DWR) finishing, the latest addition to the Dow Ecolibrium™ Brand portfolio, as a product for high-performing water repellent fabrics.

An 81% bio-based silicone-organic hybrid formulation honored with both the R&D 100 Award and the SEAL Sustainable Product Award, DOWSIL™ IE-9100 Emulsion is designed to match the water repellency performance of fluoro-containing emulsions, making it a good option for high-performance outerwear fabrics, including athleticwear, outdoor garments and equipment, personal protective equipment, and footwear.

Dow has announced the launch of DOWSIL™ IE-9100 Emulsion for durable water repellent (DWR) finishing, the latest addition to the Dow Ecolibrium™ Brand portfolio, as a product for high-performing water repellent fabrics.

An 81% bio-based silicone-organic hybrid formulation honored with both the R&D 100 Award and the SEAL Sustainable Product Award, DOWSIL™ IE-9100 Emulsion is designed to match the water repellency performance of fluoro-containing emulsions, making it a good option for high-performance outerwear fabrics, including athleticwear, outdoor garments and equipment, personal protective equipment, and footwear.

DOWSIL™ IE-9100 Emulsion offers formulators and brand owners key performance advantages expected of performance apparel and technical textiles, including the ability to tailor the level of water repellency to match the specific end-use needs. It also boasts excellent water-based stain protection and color fastness as well as good tape adhesion and logo printability. It can be applied across a wide range of fibers, both natural and synthetic, and helps maintain the breathability of fabrics and membranes to maximize comfort. Additionally, it is compatible with standard manufacturing processes, allowing for ease of use for finishing mills and is certified OEKO-TEX® ECO PASSPORT.

On October 10th at 10 a.m. CEST / 4 p.m. CST, Isabelle Riff, along with Yusuke Kuwana and Jacob Milne, Dow Scientist, Textiles, will present the specifics of this new product during a dedicated webinar titled “Advancing textiles’ durable water repellency with silicone hybrid, bio-based technology.”

09.07.2024

Asahi Kasei presents fibrillation finishing technology and LCA study report

Bemberg™ by Asahi Kasei presents its Velutine™ Evo brand, a finishing refinement technology developed by the Japanese laboratories of Asahi Kasei for Bemberg™. It offers a new way to generate fibrillation, featuring fabrics with a more “quiet-relaxed” appearance combined with a delicate and sensitive touch. VelutineTM Evo also brings environmental, global warming (CO2 emission) and water profiles for the benefit of BembergTM partners in the manufacture.

Bemberg™ by Asahi Kasei presents its Velutine™ Evo brand, a finishing refinement technology developed by the Japanese laboratories of Asahi Kasei for Bemberg™. It offers a new way to generate fibrillation, featuring fabrics with a more “quiet-relaxed” appearance combined with a delicate and sensitive touch. VelutineTM Evo also brings environmental, global warming (CO2 emission) and water profiles for the benefit of BembergTM partners in the manufacture.

The roll out of the evolved VelutineTM Evo technology will start its journey and activation with Infinity, a BembergTM partner and textile manufacturer located in Rovereto, in the Trentino Alto Adige area of Italy. Research and experimentation with new materials and finishings are part of Infinity’s daily work and results are guaranteed through attention to traceability, the use of certifications, and quality control throughout the process. Each material is closely selected from a sustainability standpoint, while the chemical impact of treating textiles is something that they also take extremely seriously. Infinity guarantees the traceability of every product that they make. Every step of the working process can be traced, thanks to a network of trusted suppliers who share their ethos and values.

Asahi Kasei is also releasing the LCA study report - Life Cycle Assessment. The study evaluated and quantified the environmental impact indicators associated with the technological processes involved in the production of BembergTM dyed fabric through the application of the traditional technology of fibrillation. LCA report study made by Centro Tessile Serico Sostenibile confirms all the projected data savings:

  • Global Warming Potential: 30% reduction in greenhouse gas emissions
  • Water consumption for ennobling process: 40% reduction
Source:

Asahi Kasei / C.L.A.S.S. Eco Hub

31.05.2024

Tintoria Finissaggio 2000 invests in Mahlo's automatic straightening system

Tintoria Finissaggio 2000 is one of the most important Italian companies in the textile finishing sector. Founded in 1973 in Masserano in the textile district of Biella, the company offers the complete range of dyeing of all types of fibres, finishing, digital printing, lamination and membrane lining. These processes are used to give fabrics certain properties, such as colour, pattern, softness, shine or waterproofness.

At Tintoria Finissaggio 2000, customers benefit from the fact that all processes are handled under one roof, from design support to the finishing of fabrics, combining decades of experience with the new possibilities of lamination and digital printing. The dyeing plant in Masserano is a state-of-the-art facility that fulfils the strictest environmental standards. In general, Tintoria Finissaggio 2000 continuously invests in state-of-the-art technologies and production facilities in order to achieve high-quality results while ensuring sustainable production processes.

Tintoria Finissaggio 2000 is one of the most important Italian companies in the textile finishing sector. Founded in 1973 in Masserano in the textile district of Biella, the company offers the complete range of dyeing of all types of fibres, finishing, digital printing, lamination and membrane lining. These processes are used to give fabrics certain properties, such as colour, pattern, softness, shine or waterproofness.

At Tintoria Finissaggio 2000, customers benefit from the fact that all processes are handled under one roof, from design support to the finishing of fabrics, combining decades of experience with the new possibilities of lamination and digital printing. The dyeing plant in Masserano is a state-of-the-art facility that fulfils the strictest environmental standards. In general, Tintoria Finissaggio 2000 continuously invests in state-of-the-art technologies and production facilities in order to achieve high-quality results while ensuring sustainable production processes.

Tintoria Finissagio 2000 also focused on innovation when equipping a new stenter frame. The company opted for the latest development from German machine manufacturer Mahlo GmbH + Co. KG: the Orthopac RXVMC-20 automatic straightening system. The new straightening concept is specially designed for processing textiles with high distortion dynamics, i.e. textiles with highly variable distortion. Two individually controlled and driven straightening modules with a total of three bow and four skew rollers ensure that bow and skew distortions are corrected in small steps. The control concept is also new. A scanner group at the infeed of the straightener detects distortions even before they reach the correction rollers. This means that the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outfeed also recognises any residual distortion, which is then corrected on the second straightening module.

Graniteville Specialty Fabrics installs Baldwin’s TexCoat™ G4 (c) Baldwin Technology Company Inc.
17.04.2024

Graniteville Specialty Fabrics installs Baldwin’s TexCoat™ G4

Graniteville Specialty Fabrics has set new standards by challenging the traditional pad finishing process. With Baldwin Technology’s spray finishing technology, Graniteville Specialty Fabrics has been able to increase production efficiency, and minimize chemical and water waste.
 
Based in Graniteville, South Carolina, Graniteville Specialty Fabrics produces coatings and coated fabrics that are resistant to water, fire, UV and weather for the military, marine and tent markets. The installation of Baldwin’s TexCoat™ G4 is part of a facility upgrade to maximize production efficiency and capacity in the durable water-repellent finishing and coating line to meet growing customer demand for advanced engineered products.

Graniteville Specialty Fabrics has set new standards by challenging the traditional pad finishing process. With Baldwin Technology’s spray finishing technology, Graniteville Specialty Fabrics has been able to increase production efficiency, and minimize chemical and water waste.
 
Based in Graniteville, South Carolina, Graniteville Specialty Fabrics produces coatings and coated fabrics that are resistant to water, fire, UV and weather for the military, marine and tent markets. The installation of Baldwin’s TexCoat™ G4 is part of a facility upgrade to maximize production efficiency and capacity in the durable water-repellent finishing and coating line to meet growing customer demand for advanced engineered products.

With sustainability benefits, tracking and process control, and Industry 4.0 integration, the TexCoat™ G4 provides high-quality fabric finishing, with no chemistry waste, as well as minimal water and energy consumption. This system utilizes non-contact precision-spray technology, ensuring precise finishing coverage with the exact amount of chemistry. Changeovers (pad bath emptying, cleaning and refilling) are reduced, resulting in substantial chemical conservation and increased productivity.

Green Theme Technologies
27.03.2024

Green Theme Technologies partners with Hwasung International

Green Theme Technologies, suppliers of the EMPEL® water-free and PFAS-free textile finishing platform, continues a trajectory of exponential growth by partnering with Korean-based global textile innovator Hwasung International. Hwasung is the first Korean mill to offer the EMPEL® high performance technology to global footwear brands and regional Korean mill customers.
      
Known globally for providing high performance textiles that incorporate functional yarns such as Dyneema, Kevlar and Cordura, Hwasung will now broaden their high performance and sustainable offerings by scaling EMPEL into their global supply chain.
      
Green Theme’s EMPEL® platform can be applied successfully to a wide range of synthetic knit, woven, non-woven and novel fabrics that are traditionally hard to treat. The diverse list of EMPEL® markets include: Outdoor, High Fashion, Footwear, Automotive, Furniture, Workwear, Athleisure Wear and Military. Because no water is used during the treatment application, EMPEL® can remove pollution and waste from any textile manufacturing process.

Green Theme Technologies, suppliers of the EMPEL® water-free and PFAS-free textile finishing platform, continues a trajectory of exponential growth by partnering with Korean-based global textile innovator Hwasung International. Hwasung is the first Korean mill to offer the EMPEL® high performance technology to global footwear brands and regional Korean mill customers.
      
Known globally for providing high performance textiles that incorporate functional yarns such as Dyneema, Kevlar and Cordura, Hwasung will now broaden their high performance and sustainable offerings by scaling EMPEL into their global supply chain.
      
Green Theme’s EMPEL® platform can be applied successfully to a wide range of synthetic knit, woven, non-woven and novel fabrics that are traditionally hard to treat. The diverse list of EMPEL® markets include: Outdoor, High Fashion, Footwear, Automotive, Furniture, Workwear, Athleisure Wear and Military. Because no water is used during the treatment application, EMPEL® can remove pollution and waste from any textile manufacturing process.

Source:

Green Theme Technologies

Active Apparel Group: Partnership with textile finishing brand FUZE Technologies (c) Active Apparel Group
15.03.2024

Active Apparel Group: Partnership with textile finishing brand FUZE Technologies

Active Apparel Group (AAG), manufacturer of performance apparel for the leisure/lifestyle and active market, announces the seventh anniversary of their partnership with the sustainable textile finishing brand FUZE Technologies.

AAG is the first apparel manufacturer to adopt FUZE’s permanent, chemical-free textile finish, and the only company in China able to apply FUZE in a closed-loop system. AAG leverages the platform to provide a range of performance characteristics to customers, including odor control, UV protection, moisture management, and cooling.

The FUZE finish utilizes gold and silver particles permanently bonded to a wide variety of natural and synthetic materials to achieve a range of performance characteristics. AAG customers employing the FUZE finish create apparel for the yoga, active lifestyle, workout, golf, and swimwear markets. 

Active Apparel Group (AAG), manufacturer of performance apparel for the leisure/lifestyle and active market, announces the seventh anniversary of their partnership with the sustainable textile finishing brand FUZE Technologies.

AAG is the first apparel manufacturer to adopt FUZE’s permanent, chemical-free textile finish, and the only company in China able to apply FUZE in a closed-loop system. AAG leverages the platform to provide a range of performance characteristics to customers, including odor control, UV protection, moisture management, and cooling.

The FUZE finish utilizes gold and silver particles permanently bonded to a wide variety of natural and synthetic materials to achieve a range of performance characteristics. AAG customers employing the FUZE finish create apparel for the yoga, active lifestyle, workout, golf, and swimwear markets. 

Source:

Active Apparel Group

Baldwin presents spray finishing system at Techtexil (c) Baldwin Technology Company Inc.
13.03.2024

Baldwin presents spray finishing system at Techtexil

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

With Baldwin’s system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.
 
Furthermore, the system offers automated speed tracking, fabric-width compensation, and real-time monitoring to track system uptime, performance and chemistry usage, as well as active care alerts.
 
In addition, the TexCoat™ G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water repellents, softeners, antimicrobials, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, and no special auxiliaries are required. The recipe is adjusted by increasing the concentration and reducing the pickup by a corresponding amount, so that the same level of solids is applied.
 
Some applications, such as durable water repellents, are only applied on the face of the fabric, instead of the traditional method of saturation through dipping and squeezing. Drier fabric entering the stenter means lower drying temperatures and faster process speeds. Single-side applications also open up the opportunity to process back-coated or laminated fabrics in a single pass of the stenter, instead of two passes.

EMPEL Green Theme Technologies
06.02.2024

PFAS-free and water-free textile finishing enters Japanese market

Green Theme Technologies (GTT), creators of the PFAS-free and water-free EMPEL® textile finishing platform, delivers advanced performance and a long term sustainability solution to the Japanese market. Green Theme Technologies, Inc. (GTT) is a US-based textile innovation company with a global vision to increase performance and eliminate pollution.

EMPEL® is a solution for textile mills looking to provide clean, high-performance finishes, and GTT actively promotes this innovative technology to all relevant Japanese companies, including mills, manufacturers, and brands. YKK, the Japanese global leader in zipper manufacturing, has already adopted the EMPEL® technology into their manufacturing process and promotes the technology globally in their new DynaPel™ collection.

Green Theme Technologies (GTT), creators of the PFAS-free and water-free EMPEL® textile finishing platform, delivers advanced performance and a long term sustainability solution to the Japanese market. Green Theme Technologies, Inc. (GTT) is a US-based textile innovation company with a global vision to increase performance and eliminate pollution.

EMPEL® is a solution for textile mills looking to provide clean, high-performance finishes, and GTT actively promotes this innovative technology to all relevant Japanese companies, including mills, manufacturers, and brands. YKK, the Japanese global leader in zipper manufacturing, has already adopted the EMPEL® technology into their manufacturing process and promotes the technology globally in their new DynaPel™ collection.

GTT’s activities in Japan are supported by the Japan External Trade Organization (JETRO), a government-related organization that works to promote mutual trade and investment between Japan and the rest of the world. GTT has been approved for JETRO’s Invest Japan Support Program, which allows GTT to leverage its resources to set up an office in Japan in the future and for J-Bridge Program to forge relationships with prospective Japanese partners.

Source:

Green Theme Technologies

Devan high cooling Photo: Devan Chemicals
09.01.2024

Devan Chemicals presents latest sustainable textile finishes at Heimtextil 2024

Devan will showcase the newest additions to their R-Vital NTL Range and Thermic High Cooling technology.

R-Vital® NTL enables textile manufacturers to boost their textiles with a range of active, natural ingredients that have a positive effect on the body and mind. Elements such as Chamomile oil and Arnica Montana are absorbed by the skin and have relaxing, moisturizing or hydrating effects. The biobased content of the R-Vital well-being technology is +97%, readily biodegradable (OECD 301B).

R-Vital® NTL Regenight™: Devan and Lucas Meyer Cosmetics join forces to launch a ground-breaking technology, R-Vital NTL Regenight™, a technology which improves sleep quality and also improves nighttime skin recovery. Using an upcycled oil soluble fraction obtained from Australian Tea tree oil distillation process, Regenight™ acts through both inhalation to improve nighttime rest and through topical action to provide skin recovery.

Tested in real-life context using proven biometric technology, the dual action provided individually by Regenight™ proposes a breakthrough approach to reduce the impact of poor-quality sleep on the skin.

Devan will showcase the newest additions to their R-Vital NTL Range and Thermic High Cooling technology.

R-Vital® NTL enables textile manufacturers to boost their textiles with a range of active, natural ingredients that have a positive effect on the body and mind. Elements such as Chamomile oil and Arnica Montana are absorbed by the skin and have relaxing, moisturizing or hydrating effects. The biobased content of the R-Vital well-being technology is +97%, readily biodegradable (OECD 301B).

R-Vital® NTL Regenight™: Devan and Lucas Meyer Cosmetics join forces to launch a ground-breaking technology, R-Vital NTL Regenight™, a technology which improves sleep quality and also improves nighttime skin recovery. Using an upcycled oil soluble fraction obtained from Australian Tea tree oil distillation process, Regenight™ acts through both inhalation to improve nighttime rest and through topical action to provide skin recovery.

Tested in real-life context using proven biometric technology, the dual action provided individually by Regenight™ proposes a breakthrough approach to reduce the impact of poor-quality sleep on the skin.

R-Vital® NTL Chamomile oil: Chamomile oil is known for its moisturizing and soothing properties. Additionally, this oil is believed to have antioxidant and inflammatory properties. Furthermore, chamomile oil is renowned for its calming effects and potential to reduce stress and anxiety, helping improve sleep quality.

R-Vital® NTL Warming: Engineered to deliver a gentle warmth, the R-Vital NTL Warming technology ensures a cozy and comfortable sleeping experience. This blend is a solution that infuses a sense of warmth, promoting physical and emotional well-being.

R-Vital NTL Arnica Montana: Harnessing the natural benefits of Arnica Montana, this ingredient, is celebrated for its potent healing and recovering properties.

At Heimtextil Devan will also present a new high cooling technology that provides an optimal and refreshing sleeping climate, ensuring a cool and restful night's sleep. Thermic High Cooling is based on reactive microencapsulated Phase Change Materials (PCMs). The smart heat exchange mechanism keeps the body within its comfort zone. This makes the body suffer less from night sweats, and results in a longer, healthier and more comfortable sleep with fewer awakenings. This new formulation with high cooling level and high solid content, presents around 30% more cooling than standard PCM formulations. One padding allows to achieve high cooling level (no need to run multiple applications). A Bio-based version is also available - Thermic® Bio, where the PCMs are derived from sustainable, natural sources.

Source:

Devan Chemicals

HeiQ Skin Care Photo HeiQ
21.11.2023

HeiQ launches a probiotics infused textile technology

HeiQ introduces a 100% biobased and long-lasting cosmetic finishing technology for textiles to the market. The newest addition to the HeiQ portfolio harnesses the power of active probiotics and selected prebiotics to enhance the skin microbiome, turning the human’s largest organ into the best-looking one.

HeiQ Skin Care is a synbiotic textile finish aimed at providing a balanced microbiome for glowing skin, even after repeated use and washing of textiles. Unlike conventional products, HeiQ Skin Care utilizes slow-release prebiotics and probiotics seamlessly integrated into a biobased textile matrix, enriching the skin's microbiome diversity, and offering long-lasting cosmetic benefits.

The synergistic combination of prebiotics and probiotics, known as synbiotics, delivers a soothing cosmetic skin treatment while relaxing, working, or sleeping. Probiotics not only restore and improve the skin's natural balance but also enhance its self-repair capabilities. Synbiotics promote skin renewal, rebalancing, and improved appearance, reducing the signs of aging and establishing a favorable environment for the skin's natural repair mechanisms.

HeiQ introduces a 100% biobased and long-lasting cosmetic finishing technology for textiles to the market. The newest addition to the HeiQ portfolio harnesses the power of active probiotics and selected prebiotics to enhance the skin microbiome, turning the human’s largest organ into the best-looking one.

HeiQ Skin Care is a synbiotic textile finish aimed at providing a balanced microbiome for glowing skin, even after repeated use and washing of textiles. Unlike conventional products, HeiQ Skin Care utilizes slow-release prebiotics and probiotics seamlessly integrated into a biobased textile matrix, enriching the skin's microbiome diversity, and offering long-lasting cosmetic benefits.

The synergistic combination of prebiotics and probiotics, known as synbiotics, delivers a soothing cosmetic skin treatment while relaxing, working, or sleeping. Probiotics not only restore and improve the skin's natural balance but also enhance its self-repair capabilities. Synbiotics promote skin renewal, rebalancing, and improved appearance, reducing the signs of aging and establishing a favorable environment for the skin's natural repair mechanisms.

A second skin that takes care of the first
The skin, the largest organ in human body, is home to a diverse community of microorganisms called the skin microbiome. It plays a crucial role in maintaining good skin condition, acting as a protective barrier against harmful agents. However, various factors, such as hormones, diet, smoking, environmental exposures, and excessive UV radiation, can disrupt its balance, leading to skin conditions like rashes, acne, psoriasis, rosacea, skin irritation, redness, eczema, and odor. Maintaining a balanced skin microbiome is essential for preserving skin integrity.

HeiQ Skin Care is suitable for all textile fibers, both natural and synthetic, and can be applied to all textile items that come in direct contact with the skin. This versatility makes it an ideal choice for daily use- at work, during sports, leisure activities, or as bedding items like bed sheets and pillows.

Intensive wear trials conducted during the development stage have proven the consistent release of synbiotics (prebiotics and probiotics) onto the skin, creating conditions to foster a well-balanced microbiome.

 

Source:

HeiQ

06.11.2023

Mahlo presents new solutions at ITMA Asia 2023

Mahlo GmbH + Co. KG will present its systems and solutions for efficient and high-quality textile production and finishing together with Shanghai Kuantex at ITMA Asia (November 19 and 23). The focus will be on the machine manufacturer's new straightening concept, the Orthopac RXVMC.

"In the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the probe system," explains Sales Manager Thomas Höpfl. The control concept is also new. A probe group at the leveler infeed detects distortions even before they reach the correction rolls. In this way, the rolls are brought directly into position and the fabric is corrected from the very first centimeter. A scanner group at the outfeed also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions. The Orthopac RXVMC therefore shows its full strength when straightening knitwear and fabrics sensitive to distortion.

Mahlo GmbH + Co. KG will present its systems and solutions for efficient and high-quality textile production and finishing together with Shanghai Kuantex at ITMA Asia (November 19 and 23). The focus will be on the machine manufacturer's new straightening concept, the Orthopac RXVMC.

"In the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the probe system," explains Sales Manager Thomas Höpfl. The control concept is also new. A probe group at the leveler infeed detects distortions even before they reach the correction rolls. In this way, the rolls are brought directly into position and the fabric is corrected from the very first centimeter. A scanner group at the outfeed also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions. The Orthopac RXVMC therefore shows its full strength when straightening knitwear and fabrics sensitive to distortion.

Also contributing to high-quality textile production and finishing is the Famacont PMC for controlling weft and stitch course density, which will also be on show at ITMA Asia. The Famacont PMC-15 uses a sensor to measure the yarn or stitch density and compares it with the target value stored in the recipe data management system. The detected deviation of the yarn density from the target value is used to fully automatically regulate the leading during the needling process on the stenter frame. Interested parties can have the mode of operation explained to them at the Mahlo booth with the help of a demo tower and their own or provided fabric samples.

Another major topic remains Industry 4.0, because the best measured data is of no use if it cannot be utilized. Mahlo has continuously developed its digital environment mSmart. "Our systems generate data that the customer can use immediately to regulate goods on-line. At the same time, all measured values are backed up in our data management system mLog enhanced and can be retrieved at any time. With this historical data, processes can be optimized and weak points in the process can be minimized," explains Sales Manager Thomas Höpfl.

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System (c) Baldwin Technology Company Inc.
06.11.2023

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

TexCoat G4’s non-contact spray technology offers numerous advantages compared to outdated finishing-chemistry application methods. TexCoat G4 processes a wide range of low-viscosity water-based chemicals, such as durable water-repellents –  including PFAS-free, softeners, anti-microbials, easy-care and flame retardants. The company's technology uses the same chemicals as found in traditional pad baths with no special auxiliaries required.

Testimonial videos from Pincroft Dyeing and Print Works and Graniteville Specialty Fabrics along with a video highlighting Baldwin’s partnership with North Carolina State University will also be screened at their stand.

Source:

Baldwin Technology Company Inc.

(c) Schoeller Textil AG
05.10.2023

Schoeller Textil presents FLEX SHIELD collection at A+A

Modern lifestyles require more than just functionality. Consumers are seeking products that offer a perfect balance between protection and comfort. The FLEX SHIELD collection offers a range of textiles that provide these functions without compromising on freedom of movement to maximize the wearer’s experience.

The Flex Shield Collection reflects Schoeller’s commitment to creating textiles that empower individuals to embrace their activities with confidence, knowing their gear will not fail and is designed for challenging conditions.

Every article in the collection is equipped with at least one of Schoeller’s pioneering textile technologies. These innovations ensure breathability, thermal regulation, as well as wind and water resistance.

Modern lifestyles require more than just functionality. Consumers are seeking products that offer a perfect balance between protection and comfort. The FLEX SHIELD collection offers a range of textiles that provide these functions without compromising on freedom of movement to maximize the wearer’s experience.

The Flex Shield Collection reflects Schoeller’s commitment to creating textiles that empower individuals to embrace their activities with confidence, knowing their gear will not fail and is designed for challenging conditions.

Every article in the collection is equipped with at least one of Schoeller’s pioneering textile technologies. These innovations ensure breathability, thermal regulation, as well as wind and water resistance.

One highlight is the schoeller®-ceraspaceTM technology, which owes its outstanding protective properties to a unique composition of special ceramic particles anchored in a polymer matrix. The ceramic particles are nearly as hard as diamonds and are firmly attached as a 3-dimensional coating to the textile. A textile with schoeller®-ceraspaceTM abrasion resistance performs significantly better than high-quality leather in terms of abrasion resistance. A fabric equipped with schoeller®-ceraspaceTM can also be more engineered to fulfill the required stretch properties, and its production process results in significantly less waste material compared to leather.

Source:

Schoeller Textil AG

14.09.2023

Rudolf commissions Baldwin’s TexCoat™ G4 lab-scale precision spray unit

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

Rudolf GmbH, a provider of chemicals to the textile industry, can now offer side-by-side performance tests of the age-old “dip and squeeze” pad versus precision spray finishing with the delivery of Baldwin Technology Inc.’s TexCoat ™ G4 lab-scale unit.

The new TexCoat lab-scale unit at Rudolf’s Geretsried, Germany-based Customer Solution Center, tests the sprayability of chemicals on fabrics as an additional tool to help the market transition to precision spray with confidence in the performance and sustainability of the end result.
 
With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates.
 
Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry. On wet-on-dry processes, the finish is applied with 50% of the amount of water required for pad finishing. Dryer fabric entering the stenter means less water to evaporate resulting in less energy and higher production speeds.
 
More specifically, with Baldwin’s TexCoat G4, textile finishers can track and control the finishing process. Changeovers are quickly performed thanks to recipe management, including automated chemistry and coverage selection. Furthermore, the system takes speed information from the drying process to insure exact coverage regardless of any change in speed. TexCoat G4 measures every drop of chemical usage ensuring that the amount of chemical add-on is precise.
 
In addition, the TexCoat G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water-repellants including PFAS-free, softeners, anti-microbials, easy care resins, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, with no special auxiliaries required.

Source:

Baldwin Technology Company Inc.

Devan’s R-vital NTL with high durability (c) Devan Chemicals NV
11.08.2023

Devan’s R-vital NTL with high durability

Devan, part of Pulcra Chemicals, has announced its R-Vital NTL technology.

R-Vital NTL enables textile manufacturers to boost textiles with a versatile range of micro-encapsulated active ingredients. This functional finish provides added value for textiles and allows manufacturers to create products that differentiate them from competitors. Furthermore, the bio-based and biodegradable well-being technology achieves a durability of 50 washes.

The main concept behind micro-encapsulation is that active ingredients, present on textiles, are gradually released on the skin. When using the textiles or while wearing the clothing, the microcapsules burst by friction and release their assets. Since not all capsules break at the same time, a continuous and gradual release of the actives is obtained.

The natural range comprises five distinct products, each with specific attributes:

Devan, part of Pulcra Chemicals, has announced its R-Vital NTL technology.

R-Vital NTL enables textile manufacturers to boost textiles with a versatile range of micro-encapsulated active ingredients. This functional finish provides added value for textiles and allows manufacturers to create products that differentiate them from competitors. Furthermore, the bio-based and biodegradable well-being technology achieves a durability of 50 washes.

The main concept behind micro-encapsulation is that active ingredients, present on textiles, are gradually released on the skin. When using the textiles or while wearing the clothing, the microcapsules burst by friction and release their assets. Since not all capsules break at the same time, a continuous and gradual release of the actives is obtained.

The natural range comprises five distinct products, each with specific attributes:

  • Aloe vera: Known for its skin-smoothing and softening properties.
  • Avocado seed oil: Known for its skin-moisturizing capabilities.
  • CBD: Known for its relaxation properties.
  • Multivitamin: A blend of provitamin D, vitamins C and E, and ginger.
  • Vitamin E: Known to offer protection against free radicals and premature aging
Source:

Devan Chemicals NV

(c) Freudenberg Performance Materials Holding GmbH
(From left) Dr. Frank Heislitz, CEO Freudenberg Performance Materials, Andrea Luzi, Mayor of Sant'Omero, Italy, Dr. Tilman Krauch, CTO Freudenberg Group, Christian Cavaletti, Head of Operations Freudenberg Performance Materials Apparel Italy, Jonathan Oh, Senior Vice President & General Manager Global Business Division Apparel, and Dr. Hannah Koeppen, Vice President & General Manager Freudenberg Performance Materials Apparel Europe.
02.06.2023

Freudenberg: New Competence Center for Apparel Interlinings in Italy

Freudenberg Performance Materials Apparel Europe (Freudenberg) has expanded its facility in Sant´Omero, Italy, into a competence center for finishing and coating apparel interlinings. The Competence Center was officially opened on May 26, 2023.

The Freudenberg team in Sant´Omero has over 35 years of expertise in the manufacture of high-quality interlinings for menswear: base materials produced at the site are finished and coated to customers’ specifications. With the new competence center, the facility will now focus on coating and finishing all nonwoven, woven and weft apparel interlinings in Freudenberg’s portfolio. Customers throughout Europe will enjoy the advantages of greater manufacturing flexibility and a more diverse product offering.

Freudenberg Performance Materials Apparel Europe (Freudenberg) has expanded its facility in Sant´Omero, Italy, into a competence center for finishing and coating apparel interlinings. The Competence Center was officially opened on May 26, 2023.

The Freudenberg team in Sant´Omero has over 35 years of expertise in the manufacture of high-quality interlinings for menswear: base materials produced at the site are finished and coated to customers’ specifications. With the new competence center, the facility will now focus on coating and finishing all nonwoven, woven and weft apparel interlinings in Freudenberg’s portfolio. Customers throughout Europe will enjoy the advantages of greater manufacturing flexibility and a more diverse product offering.

Freudenberg installed the necessary finishing and coating technology at the new competence center in Italy over the last few months, building a new production hall for this machinery and equipment. Until recently, the bulk of interlinings were coated and finished in Weinheim, Germany. The facility there will now operate as a further competence center specializing in the production of base materials for apparel interlinings.

In addition to establishing the competence center, Freudenberg has also improved logistics. A new central warehouse in Italy now supplies customers in Southern Europe. It complements the central warehouse in Germany that delivers goods to customers in Northern Europe. As a result, Freudenberg is shortening both delivery routes and delivery times.

Source:

Freudenberg Performance Materials Holding GmbH

Photo: CHT
26.05.2023

BEZAKTIV ONE: New Reactive dyes range by CHT

  • Reactive dyes for water and energy saving dye processes with significantly shortened process time

BEZAKTIV ONE covers a broad color spectrum with tinctorial very strong dyes. This enables a cost-efficient dye process with significantly less dye and salt. The excellent wash-off behavior allows short rinse cycles at lower temperatures and therefore offers further ecological and economic advantages. The dyes are particularly suitable for durable textiles due to their good multiple wash fastness.

Cellulosic fibers are often dyed with reactive dyes, as these are commercially available in a wide range of colors that result in dyeings with high wash fastness. However, reactive dyeings require a lot of water due to the necessary rinsing processes. Due to increased ecological requirements, the development of energy and water saving processes is not just a trend, but rather a core prerequisite for new dyes.

A minimal number of rinsing baths and generally lower temperatures for dye exhaust, rinsing and soaping contribute to an overall efficient water and energy saving dyeing processes.

  • Reactive dyes for water and energy saving dye processes with significantly shortened process time

BEZAKTIV ONE covers a broad color spectrum with tinctorial very strong dyes. This enables a cost-efficient dye process with significantly less dye and salt. The excellent wash-off behavior allows short rinse cycles at lower temperatures and therefore offers further ecological and economic advantages. The dyes are particularly suitable for durable textiles due to their good multiple wash fastness.

Cellulosic fibers are often dyed with reactive dyes, as these are commercially available in a wide range of colors that result in dyeings with high wash fastness. However, reactive dyeings require a lot of water due to the necessary rinsing processes. Due to increased ecological requirements, the development of energy and water saving processes is not just a trend, but rather a core prerequisite for new dyes.

A minimal number of rinsing baths and generally lower temperatures for dye exhaust, rinsing and soaping contribute to an overall efficient water and energy saving dyeing processes.

BEZAKTIV ONE dyes can be dyed, rinsed and soaped between 40 and 60 °C. Therefore, the BEZAKTIV ONE exhaust dyeing process is significantly shorter compared to conventional reactive dyeing processes, where temperatures between 60 and 98 °C are required. This advantage means savings in process time and higher productivity for the textile dyer.

The advantages become particularly clear when dyeing medium to dark shades with the BEZAKTIV ONE process. Due to the high fixation level in combination with good color build-up dark shades can be matched with lower dye concentrations of BEZAKTIV ONE than with conventional bifunctional reactive dyes. The addition of the auxiliary COTOBLANC SEL in the second soap bath has an additional positive effect, so that a washing process with low water and energy consumption generates excellent wet fastness properties on the textile.

(c) A. Monforts Textilmaschinen GmbH & Co. KG
Members and associates of the WasserSTOFF consortium from Monforts, Pleva, NTB Nova Textil, TU Freiberg, Hochschule Niederrhein and Honeywell Thermal Solutions, at the launch meeting of the new project at the Monforts ATC in Mönchengladbach.
28.04.2023

Monforts presents green hydrogen project WasserSTOFF at ITMA 2023

At ITMA 2023 in Milan from June 8-14 this year, Monforts is organising two free-to-attend seminars and discussions on the potential of green hydrogen as a new energy source for textile finishing, drying and related processes.

Monforts is currently leading a consortium of industrial partners and universities in the three-year WasserSTOFF project, launched in November 2022, that is exploring all aspects of this exciting and fast-rising new industrial energy option.
The target of the government-funded project is to establish to what extent hydrogen can be used in the future as an alternative heating source for textile finishing processes. This will first involve tests on laboratory equipment together with associated partners and the results will then be transferred to a stenter frame at the Monforts Advanced Technology Center (ATC).

At ITMA 2023 in Milan from June 8-14 this year, Monforts is organising two free-to-attend seminars and discussions on the potential of green hydrogen as a new energy source for textile finishing, drying and related processes.

Monforts is currently leading a consortium of industrial partners and universities in the three-year WasserSTOFF project, launched in November 2022, that is exploring all aspects of this exciting and fast-rising new industrial energy option.
The target of the government-funded project is to establish to what extent hydrogen can be used in the future as an alternative heating source for textile finishing processes. This will first involve tests on laboratory equipment together with associated partners and the results will then be transferred to a stenter frame at the Monforts Advanced Technology Center (ATC).

To be considered “green”, hydrogen must be produced using a zero-carbon process that is powered by renewable energy sources such as wind or solar. Currently, the cleanest method of hydrogen production is electrolysis, using an electrically-powered electrolyzer to separate water molecules into hydrogen and oxygen. The purity of the hydrogen is also important, and impurities must be removed via a separation process.

“Despite all its advantages, there are obstacles to overcome on the way to widespread, economically-feasible green hydrogen use,” explains Monforts Textile Technologies Engineer Jonas Beisel. “Until there are widely available, reliable and economical sources of this clean power, the cost of producing it will remain prohibitive. The infrastructure is not yet there, and hydrogen also has a tendency to make steel brittle and subject to fracture, which is something that requires further investigation in both its transportation and use in industrial processing.
“Green energy’s potential as a clean fuel source is tremendous, but there is much we need to explore when considering its use in the textile finishing processes carried out globally on our industry-leading Montex stenter dryers and other machines.”

At its Advanced Technology Center (ATC) in Mönchengladbach, Monforts will be carrying out intensive tests and trials to assess the reliability of both processes and final products when different natural gas and hydrogen mixtures – up to 100% green hydrogen – are employed. The results will be closely analysed by the consortium partners because there are many parameters that at this stage remain unknown.

The aim, Beisel adds, is to both reduce CO2 emissions and – following the rising prices and industry turbulence experienced by manufacturers over the past year or so – to further reduce a dependency on natural gas.

The three-year WasserSTOFF project is sponsored by Germany’s Federal Ministry for Economic Affairs and Climate Action, and with Monforts at the helm brings together industrial partners Pleva and NTB Nova Textil, with academic input from the Hochschule Niederrhein and the Technical University of Freiberg.

02.12.2022

Baldwin presents sustainable TexCoat G4 Finishing System at Igatex Pakistan

Baldwin Technology Company Inc. announced that Igatex Pakistan will officially kick off its new partnership with long-established Pakistan textile technology agent Al Ameen Trading Corporation. Representatives from both companies will team up to demonstrate Baldwin’s highly sustainable TexCoat™ G4 finishing system.

Igatex, the International Exhibition for Garment, Textile Machinery and Accessories, takes place December 1-4 at the Expo Centre in Lahore. Baldwin and Al Ameen will demonstrate TexCoat G4 and provide details on Baldwin’s Plasma Pure corona treatment as well as TexMoister G2™ remoistening systems technologies.

Baldwin Technology Company Inc. announced that Igatex Pakistan will officially kick off its new partnership with long-established Pakistan textile technology agent Al Ameen Trading Corporation. Representatives from both companies will team up to demonstrate Baldwin’s highly sustainable TexCoat™ G4 finishing system.

Igatex, the International Exhibition for Garment, Textile Machinery and Accessories, takes place December 1-4 at the Expo Centre in Lahore. Baldwin and Al Ameen will demonstrate TexCoat G4 and provide details on Baldwin’s Plasma Pure corona treatment as well as TexMoister G2™ remoistening systems technologies.

Baldwin’s TexCoat G4 non-contact precision-spray technology helps textile finishers up their game by enabling consistent, high-quality finishing, with zero chemistry waste and drastically minimized water and energy consumption. With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.

Source:

Baldwin Technology Company Inc.