From the Sector

• 10–12 May 2022, Cologne, Germany (hybrid)
• The unique concept of presenting all renewable material solutions at one event hits the mark: bio-based, CO2-based and recycled are the only alternatives to fossil-based chemicals and materials

Ready-to-use fossil-free sustainable material solutions with a low carbon footprint are in fast-growing demand. Innovative brand owners are keeping an eye out for such solutions, in particular those that will soon reach the mainstream.

For the second time, nova-Institute presents numerous market highlights from bio- and CO2-based chemicals and materials as well as from chemical recycling: All material solutions based on renewable carbon. Together, there is sufficient potential to completely replace petrochemicals by 2050. To tackle climate change at its roots, all additional fossil carbon from the ground must be substituted with renewable alternatives. Over the course of three days, participants will get a comprehensive overview of the latest developments in the renewable material sector, with a focus on industry-ready solutions from a wide spectrum of sustainable raw materials and technologies.

In 2021, the new concept of the Renewable Materials Conference generated an outstanding response, which exceeded all expectations: 420 online participants witnessed a firework of innovations of non-fossil material. 60 speakers, 11 panel discussions, 500 public posts and 1,500 networking activities were proof of the lively exchange during the three conference days.

In 2022, nova-Institute plans to host the conference physically in the heart of Germany's fourth largest city, Cologne, just a few hours away from France, Belgium and the Netherlands. Expected are 400 participants on-site and many more online. On-site, the conference will be accompanied by a large exhibition where companies and institutes can showcase their recent developments. The supporting program, networking activities and many secluded spots at the location offers excellent opportunities to make new business contacts and refresh old ones.

The focus of the conference: All material solutions based on renewable carbon – avoiding the use of additional fossil carbon. The entire spectrum of renewable materials is covered: bio-based, CO2- based and recycled.

The program includes a diverse range of bio-based materials such as bio-based polymers, plastics and biocomposites (first and second generation, biowaste), CO2-based materials (from fossil and biogenic point sources, atmosphere) as well as mechanically and chemically recycled materials.

The new, industrial, entry-level EFI™ Reggiani BLAZE scanning printer from Electronics For Imaging, Inc. is making its debut at the ITMA Asia tradeshow, 12-16 June in Shanghai, China. The high-quality printer is an easy-to-use, smart solution to help textile companies blaze their successful trail into the world of efficient, sustainable industrial inkjet printing. It is equipped with EFI Reggiani’s state-of-the-art technology, offering high quality, reliability and flexibility on the widest variety of designs.

Cutting-edge technology in a compact footprint
The EFI Reggiani BLAZE printer is designed to give textile companies the opportunity to enter the digital textile printing market with a compact solution. The new, 1.8-metre wide printer offers an innovative, low-maintenance, continuous recirculation ink system equipped with a level sensor and degassing as well as a printhead crash protective system for longer printhead life and superior uptime.
 
Thanks to its cutting-edge printhead reliability and low maintenance costs for a competitive TCO (total cost of ownership), the BLAZE printer can produce up to 125 linear metres per hour with a printing resolution up to 600x1200 dots per inch (dpi). The printer – which delivers excellent productivity as one of the fastest digital inkjet solutions in its class – has eight 300-dpi dual channel printheads and can print in up to eight colours with full variable drop size.

Flexible fabric feed and handling for higher productivity
The EFI Reggiani BLAZE is equipped with a continuous and switchable belt washing unit to remove water and fabric hairs. An embedded device for adhesive application offers the possibility to use thermoplastic, resin and permanent adhesives.
 
The printer also includes other features for enhanced productivity and value, including a 400-mm roll unwinder, expandable shafts, an air gun and a pneumatic bar for standard fabrics.

Efficient software and electronics technology
The Reggiani BLAZE printer offers a friendly and intuitive user interface with real-time image processing and flexible queue management. The software also runs a WYSIWYG (What You See Is What You Get) job editor, as well as tools to accurately predict printing speed and ink usage.

EFI Reggiani TERRA Silver enhancement
EFI has also released an enhanced version of the EFI Reggiani TERRA Silver printer, a 1.8-metre wide printer operating with EFI Reggiani’s unique TERRA pigment ink with binder solution for high-quality, highly sustainable, direct-to-textile printing without steaming or washing.

Features:

• A new recirculating ink system for superior reliability and minimum maintenance at start up and during production
• Several printing modes to ensure maximum flexibility in terms of design capability
• New, real-time image processing that eliminates time spent in image pre-calculations
• A user friendly, intuitive interface
• A more-efficient polymerisation process that takes place as printed textile goes through the printer’s on-board dryer.

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

At ITMA Asia 2021, Oerlikon will present the next generation of an automatic texturing solution with up to 25 % energy saving and up to 30 % higher production speed, easy maintenance and best yarn quality. The core of this machine, the socalled EvoCooler, will be shown as an exhibit in combination with digital solutions like AIM4DTY. In the field of high-precision flow control solutions components, the two new gear metering pumps developments for the production of aramid and spandex will be presented as well.

The Oerlikon Nonwoven experts will be presenting efficient solutions and comprehensive technology know-how for challenging filtration tasks to an international trade audience at the FiltXPO 2020 in Chicago, USA (Stand # 420), taking place between February 26 and 28.

Meltblown technology is one of the most efficient methods for producing very fine and highly-separating filter media made from manmade fibers. New, unique and highly-sophisticated filter media are easy to manufacture thanks to Oerlikon Nonwoven’s optimized meltblown technology. This process is characterized by its constant melt pressure distribution and consistent dwell time across the entire width of the spinning beam, Furthermore, the novel guidance and distribution of the process air outside the coathanger distributor offered by the Oerlikon Nonwoven technology prevents so-called hotspots, which overall ensures particularly homogeneous nonwoven properties and basis weights even in the case of delicate raw materials.

The Oerlikon Nonwoven charging unit stands out against other concepts currently available on the market. Users can freely choose from a large number of variation possibilities and set the optimum charging method depending on the filter application, allowing the Oerlikon Nonwoven charging unit to also be used for the manufacture of EPA- and HEPA-class filter media.

The new forming section ensures improved nonwoven formation evenness across the entire width, even in the case of high spinning speeds, special polymers and polymer combinations. In addition to this, the newly-designed system also ensures that nonwovens only require minimal edge trimming at the end of the production process. The newly-developed mixedfiber technology enables the combining of various filament cross-sections and polymers, in order to set ideal filtering and pleating performances, for example.

• Comprehensive 3D printing expertise in the automotive, aerospace, consumer goods and medical application sectors
• Hands-on application presentation with a leading RV and trailer manufacturer
• Content-rich Live Talks with industry-leading business partners
• Live demonstration of pigmented plastic filaments with BASF Colors & Effects

BASF 3D Printing Solutions (B3DPS) exhibited for the second time at K 2019 in Düsseldorf, Germany. At the world’s biggest trade show for plastics and rubber industry, B3DPS welcomed visitors from October 16 through 23 at the BASF SE stand C21/D21 in Hall 5 and presented its extensive portfolio of 3D printing materials and service solutions aiming at enabling industrial additive manufacturing at scale. What’s more, the company’s 3D printing experts did offer insights into the latest technological innovations and application developments in the “competencies” section.

Customized 3D printing highly attractive to RV and trailer market
The Concept Caravan at the BASF stand gave visitors hands-on experience of the impressive spectrum of applications offered by B3DPS. Alongside complex samples of printed modular construction elements, over one hundred individual parts have been 3D-printed using advanced photopolymer, filament and powder-based ready-to-print material formulations. The RV and trailer market is exceptionally attractive as it can greatly benefit from unique advantages offered by additive-based manufacturing, namely the high customizability of parts with complex geometries as well as the rapid availability of production parts without incurring tool costs. The very diverse material characteristics of the construction elements meet the production requirements for both vehicle exteriors and interior fittings. In addition, the final coating of manufactured parts plays a decisive role in many application areas, and this is also covered by the comprehensive BASF technology portfolio.

• Empowering fashion with responsible R&D, cutting edge finishing and a Made in Italy design imprint

Paris - “The soul of sustainable fashion is an alchemy, a combined commitment and an act of responsibility”. This is the motto ‘embossed’ in the collections and the values of Italian Converter. At Première Vision, the leading manufacturer celebrates its 25th anniversary and presents E.C.O. KOSMOS, a cross-collection, a brand-new ‘green line’ range’ and a winning formula shining a light on the company’s responsible path and unique ‘blend’ for the fashion of tomorrow.

The acronym E.C.O. stands for Ecologic, Conversion, Optimisation; three unique concepts and values that truly embody Italian Converter DNA: sustainability, transformative process and quality improvement.
For over 25 years, Italian Converter creates high-quality materials for some of the leading fashion and accessories brands. “Made in Italy and sustainability are part of our DNA.” Says Costantino Karazissis, founder of Italian Converter. “We believe that responsible sourcing and processes as well as a deep research into new technology pathways and a market-savvy taste for material design must be the starting point.”

At the core of the company’s responsible alchemy is also the constant research for the perfect balance of 100% Made in Italy materials. “We proudly collaborate with 120 skilled employees producing new hybrid material innovations daily, attracting partnerships from the best high-end brands both in Italy and abroad”.

Toupe and brick red E.C.O. Graffiti (100% linen) on E.C.O. Aurora (cotton and AMNI SOUL ECO®)

E.C.O. KOSMOS is entirely traceable, transparent, 100%made in Italy. The collection walks through a very complete and balanced range sustainable materials - from natural to eco high tech ones- that are transformed, enriched and valued in 9 high-tech cutting-edge innovations thanks to the Italian Converter expertise.
•    The natural line starts from bases of cotton bonded with AMNI SOUL ECO®, an enhanced polyamide 6.6 that degrades within 5 years instead of decades, as other conventional ones do.
•    The stretch innovations start from bases in GRS-certified Newlife™, a cutting-edge premium recycled polyester created using a High-Tech Conversion Model. Thanks to a mechanical process, used plastic bottles are turned into a top-quality polymer and yarn which is 100% traceable and 100% Made in Italy. The whole process takes place within a 100 square km area in Piedmont in Northern Italy.
 
All the references make use only of water-based resins and Standard 100 by OEKO-TEX® certified dying. The result, is resistant and transpiring solutions which come with bold and high-performing features, with a soft touch or even with a silky, yet strong, and enveloping feel. The designs range from rustic to contemporary and nod to jacquard, ‘authentic look’ and ‘drill’ hints. An ideal solution for footwear, apparel and leather goods.

Long story short? No compromises. E.C.O. Kosmos reflects design, innovation and responsible values, as well as 100% Italian Converter know-how.
 
“But this is just the beginning,” adds Karazissis. “The next step we are going to implement in the E.C.O. Kosmos cross-collection is a progressive integration of our triple-expertise, processes and R&D.” A sustainable step forward, a leap woven into a deep expertise a story to-be-continued. For a better future, this is for sure.

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

As the tradition goes, twice a year the functional fabric fair Performance Days selects the most innovative fabrics, accessories and finishes for their Performance Forum. This year, two functional finishes from textile innovator Devan Chemicals (Moov&Cool® & R-Vital™) were chosen. R-Vital™ was awarded with the ‘100% Jury Like’ stamp, meaning all the members of the Jury selected the sample, a recognition only granted to a handful of the 1400 applications.

R-Vital™ – ‘100% Jury Like’
R-Vital™ is a range of microencapsulated active ingredients that boost textiles with anti-oxidative effects. The microcapsules, attached to the fibre, deliver antioxidants to the body upon friction. The ‘100% Jury Like’ sample is treated with a well-chosen blend of Ubiquinol (Q10), Sea kelp and Thyme oil, which enhances recovery after sports performances. As R-Vital™ is also suitable for other market segments, such as bedding textiles, Devan enables its customers to compose their own blend, allowing them to create truly unique products and hence properties.
Marleen Van der Auwera, BU Manager Health & Wellness is happy to see that R-Vital™ is getting some more attention. “When the technology was first launched about a year ago, we noticed people had some difficulties understanding the concept because it was so revolutionary to them”, she says. “But this recognition really indicates more and more people are seeing its potential.”

Moov&Cool®
Moov&Cool® is a patented polymer technology, providing a cool comfort feel through a combination of durable heat absorption capacity and a unique, balanced moisture transfer system. By lowering the body core temperature, the finishing treatment helps professional athletes to take their performance to the next level. Furthermore, the technology is also designed to enhance comfort during physical activities of recreational athletes.
Moov&Cool® was first launched at Performance Days in April and will be presented in full detail at the upcoming edition, which will take place on November 28^th & 29^th in Munich, Germany.

The fourth edition of the ICNF - International Conference on Natural Fibers – Smart Sustainable Solutions will be taking place from 1-3 July 2019 in Porto, Portugal, is accepting extended abstracts of two full pages until 31st January 2019.
The Conference, focused on the latest scientific and technical advances in natural fibers will bring together more than 300 participants from universities, research and technological centers and companies.

Program topics
Following up the success of ICNF2017 held in Braga, Portugal, focusing on the topic ‘Advanced Materials for a Greener World’, next year’s ICNF is devoted to the topic ‘Smart Sustainable Solutions’.
The conference topics include:

•    New processes for natural fiber agriculture extraction and processing;
•    Natural fiber reinforced biopolymers;
•    Innovative natural fibers & structures;
•    Functional natural fibers;
•    Natural fiber modification techniques;
•    Advanced fibrous structures based on natural fibers;
•    Nanodimensional natural fibers;
•    Natural fiber based polymeric composites;
•    Green composites;
•    Natural fiber based cementitious composites;
•    Applications of natural fibers in high end sectors;
•    Analytics, modeling and prediction of properties and behavior;
•    Biomimetics;
•    Product development based on natural fibers;
•    Markets for natural fibers;
•    Sustainability of natural fibers: life cycle assessment studies;
•    Textile processing of natural fibers;
•    Properties & characterization of natural fibers & structures.

Natural Fibrenamics Award 2019
After the success of last editions, the Natural Fibrenamics Award is again included in the ICNF2019 program to award the best innovative products in the field of natural fibers. The innovative product applications will be shown during the Conference in a special showroom and evaluated by a selected jury in terms of innovation, design and functionality. The contest intends to be a showcase of the latest innovations in the field of natural fibers, both for the scientific and industrial communities.

The online abstract submission is open until January 31, 2019 at the official ICNF2019 website: www.icnf2019.fibrenamics.com

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, will be presenting its innovative denim solutions for manufacturers and brands at DenimsandJeans India 2018, on August 1 & 2, in Bangalore, India.

Just two months after the DenimsandJeans Vietnam show, Archroma will again showcase its unique combination of technologies for denim effects and colors, from fiber to finish, from the authentic roots of indigo to the most innovative and eco-advanced solutions.

At the India show, Archroma’s expert team will also present its coatings and washing solutions aiming at bringing denim creativity to a whole new dimension.
Visitors at the booth will be able to see an “illustration collection” of exciting indigo casts.

DENISOL®, BRINGING INDIGO BACK TO ITS ROOTS - NOW ANILINE-FREE*
Archroma’s Denisol® range is a newly developed pre-reduced liquid indigo solution that is manufactured in Archroma’s award winning ‘zero liquid discharge’ manufacturing plant in Pakistan. Denisol® Indigo 30 liq is compliant with major official eco-standards and requirements from retailers, brands and fashion leading companies and helps to produce fabrics suitable for current eco-labeling such as bluesign® and GOTS.

Responding to demands for a non-toxic alternative to the dyes that are used for the iconic and traditional indigo blue that consumers associate with denim and jeans, Archroma just announced the upcoming new Denisol® Pure Indigo 30.

ADVANCED DENIM, TOWARDS WATERLESS DENIM DYEING
Consider this: The water needed to produce one pair of jeans is said to be ~ 11'000 liters(1). With approximately 167 million pairs of jeans produced monthly(2), that is 1,837,000,000,000 liters of water consumed every month in the process!
Based on the Denim-Ox and Pad/Sizing-Ox dyeing processes, Archroma’s multi-awarded ADVANCED DENIM, dyeing technology allows savings of up to 92% in water, 87% in cotton waste and 30% in energy, compared to a conventional denim dyeing process.

The technology has been adopted by brands like Patagonia and received the prestigious 2012 ICIS Innovation Award and Innovation with Best Environmental Benefit Award.

• Optisul® C, “soft colors” made easy
  With Optisul® C dyes, denim manufacturers can produce soft denim colors in continuous dyeing processes, as well as on coating and printing. Optisul® C affinity-free, sulfide-free dyes can easily be combined with each other to create garments suitable for wash-down treatments in a wide array of easily achievable and reproducible soft colors.
  They are suitable for GOTS and bluesign® approval.
• Diresul® RDT Ocean Blues, ocean-themed bright sulfur blue dyes
  Archroma’s Diresul® RDT Ocean Blues are a collection of vibrant, ocean-themed bright sulfur blue dyes. These best-in-class dyes and their auxiliaries bring out the best of indigo, improve workability, dyeing consistency and process safety.
  They can be combined with Denisol® Indigo 30 liq in bottoming/topping manufacturing routes for avant-garde blue styles.
• Diresul® blacks & greys, a cosmos of greys and deep black and navies
  Archroma’s dye portfolio of conventional and black Diresul® specialties allow to create a universe of greys and deep black and navies. From superficial to solid blacks for both extreme wash-down and stay black effects.

EARTHCOLORS, TRACEABLE FROM NATURE TO FASHION
The EarthColors patented range of “biosynthetic” dyes for cotton and cellulose-based fabrics, which are made from waste left over by the agricultural and herbal industry after extraction, such as almond shells, saw palmetto, or rosemary leaves. The latest NFC technology used on the end-product hangtags enables transparency and traceability through the supply chain to consumers.
The EarthColors allow to produce the earth tones that are coming strong: red, brown and green colors. They have been adopted by brands such as Patagonia, Kathmandu and G-Star, and won an OutDoor Industry Award 2017.

COATING, A WHOLE UNIVERSE OF COLORS AND EFFECTS
Archroma’s dye and chemical specialties portfolio allows to create exciting colors and effects using coating applications, from exclusive sulfur dyes and pigment specialties that help highlighting the indigo look, to functional finishes that give performance to denim garments - using water-based, formaldehyde-free or ultra-low formaldehyde polymers.

SOLUTION PACKAGES FOR SUSTAINABILITY
Archroma recently introduced the ONE WAY Process Simulator, the last update of a calculation tool that supports its ONE WAY Sustainability Service introduced back in 2012. The new, online software can be used to mimic and compare products and processes, and thus calculate the ecological and economical profile of the final end-product.
Archroma’s portfolio of ZDHC MRSL-compliant chemicals and dyes is integrated into the ONE WAY calculation tool since 2013.
“It is time to make denim in a whole different way; denim that brings together innovation, sustainability and creativity,” says Anjani Prasad, Head of Sales India, Archroma. “Brands around the globe are exploring how to make fashion in a cleaner and safer way, and Archroma has the solutions to do just that, to create denim with a soul.”
Visit Archroma at DenimsandJeans India 2018 at t at Hotel Lalit, Bangalore, India, on August 1 & 2, 2018.
* Below limits of detection

(1) Arjen Y. Hoekstra, The Water Footprint of Modern Consumer Society
(2) American Chemical Society, www.sciencedaily.com/releases/2012/06/120619123753.htm.
Denisol®, Optisul®, Diresul® are trademarks of Archroma registered in many countries.
© 2018 Archroma