From the Sector

Reset
344 results
(c) Dr. Wieselhuber & Partner GmbH
25.11.2021

W&P: Modebranche - Trendometer 2022

Was sind die angesagten Themen in der Modebranche im Jahr 2022?  Auf einer Skala von 1-10: Welche Trends scheuchen die Player aus ihrer Komfortzone, welchen „Impact“ haben sie?
Branchenexperte Philipp Trompeter von Dr. Wieselhuber & Partner (W&P) wagt eine Prognose – im Trendometer 2022.

Was sind die angesagten Themen in der Modebranche im Jahr 2022?  Auf einer Skala von 1-10: Welche Trends scheuchen die Player aus ihrer Komfortzone, welchen „Impact“ haben sie?
Branchenexperte Philipp Trompeter von Dr. Wieselhuber & Partner (W&P) wagt eine Prognose – im Trendometer 2022.

Engpass Lieferkette und Warenversorgung - IMPACT 10
Nach Ifo-Umfragen leiden fast alle Modehändler unter Lieferproblemen und sie rechnen damit, dass diese Versorgungslücken noch weit in das Jahr 2022 andauern. Während es in Lockdown-Zeiten noch darum ging, die Warenversorgung mit Hinblick auf Unsicherheit bzgl. der Öffnungszeiten im Textileinzelhandel möglichst flexibel zu halten, kämpfen die Lieferanten nun überwiegend damit, die Ware zielgenau aus den Produktionsländern in die Absatzmärkte zu schaffen. Die Hersteller müssen mit Herausforderungen wie Rohstoffverknappung, Containerstaus und Hafenschließungen umgehen. Wer seine Supply-Chain also bestmöglich im Griff hat, verfügt über einen Wettbewerbsvorteil gegenüber Lieferanten, deren Ware nicht zum geplanten Abverkaufszeitpunkt am POS eingetroffen ist. Hierbei gilt es zum einen den Anteil aus Fernost und Nearshore Produktion auszubalancieren. Aber auch operative Spielregeln in der Warenlogistik müssen berücksichtigt werden. Die Digitalisierung spielt auch weiter eine tragende Rolle, wenn es darum geht Prozesse unternehmensweit schlank und fit zu machen, um so den steigenden Einkaufs- und Logistikkosten entgegenzuwirken.

Wirksame Pillen für die Performance – IMPACT 9
Gerade in wirtschaftlich herausfordernden Zeiten mit steigenden Beschaffungskosten kommt es drauf an, die „richtigen Pillen zu schlucken“, die zu einer Verbesserung der Performance beitragen. Pricing ist der eine Hebel. Im hochwertigen Segment wird bereits versucht, durch selektiven Vertrieb die Preise und Margen zu erhöhen. Doch nicht immer sind Preisanpassungen möglich, vor allem wenn Eckpreislagen gehalten werden müssen oder die Macht des Handels zu groß ist. Umso mehr rücken die eigenen Kosten in den Fokus. Viele Einsparpotenziale, die während der Corona-Hochphase eingeführt wurden, können in den „Regelbetrieb“ überführt werden. Dazu gehört z.B. die Senkung der Marketing-/Vertriebskosten durch digitales Ordern und andere Prozessoptimierungen. Doch das allein reicht nicht: Weitere Kostenstellhebel für die operative Exzellenz liegen erfahrungsgemäß im Einkauf, in der Logistik und Supply Chain, im Neuproduktentwicklungsprozess sowie last but noch least in den Gemeinkosten. In allen Segmenten spielt die Digitalisierung eine Schlüsselrolle: Digitale Prozesse und Vernetzung sowie digitale Tools sind erforderlich, um effizienter, robuster und damit renditestärker zu werden.

Konsequente Nachhaltigkeit im gesamten Geschäftsmodell - IMPACT 8
Das Thema „Nachhaltigkeit“ ist durch die Pandemie zunächst in der öffentlichen Wahrnehmung etwas in den Hintergrund gerückt. Gleichzeitig haben die meisten Unternehmen den gesellschaftlichen und politischen Druck sowie die zunehmende Wichtigkeit für den Endverbraucher erkannt und zahlreiche Initiativen und konkrete Maßnahmen in diese Richtung gestartet. Für echte Nachhaltigkeit in der Textilbranche reichen einzelne Projekte jedoch nicht. Die Dimensionen „Planet“, „People“ und „Performance“ müssen konsequent angegangen werden. Umweltfaktoren (Planet) sind z.B. nachhaltige Praktiken in der der Rohstoffgewinnung (inkl. Recyclinganteilen), Verringerung des Wasserverbrauchs in der Produktion oder die Reduktion von Verpackungsabfällen. In der Dimension „People“ sind insbesondere die sozialen Standards in der Produktion im Fokus. Wer nachhaltig am Markt vertreten zu sein will,  braucht zudem ein robustes Geschäftsmodell, das nachhaltig gute Ergebnisse liefert, um auch in die Zukunft investieren zu können (Performance). Nur so sind Unternehmen auch krisenresistent.

Source:

Dr. Wieselhuber & Partner GmbH

Indorama Ventures launches the industry's first report on contributions to UN Sustainable Development Goals (c) Indorama Ventures Public Company Limited
SDGs Report Cover
24.11.2021

Indorama Ventures launches the industry's first report on contributions to UN Sustainable Development Goals

Indorama Ventures Public Company Limited (IVL), a world-class sustainable chemical company, introduced the first independent Sustainable Development Goals (SDGs) Report developed by the private sector in Thailand. The report provides details of the company’s sustainability strategy, aligned with the United Nation’s SDGs.

Renaud Meyer, UN Development Programme (UNDP) Resident Representative to Thailand, said, “We support countries in achieving the UN Sustainable Development Goals through integrated solutions. Achieving the goals at global level requires the partnership of governments, private sector, civil society and citizens alike to make sure we leave a better planet for future generations. The Sustainable Development Goals Report developed by the private sector is one way to urge more constructive collaboration among sectors.”  

Indorama Ventures Public Company Limited (IVL), a world-class sustainable chemical company, introduced the first independent Sustainable Development Goals (SDGs) Report developed by the private sector in Thailand. The report provides details of the company’s sustainability strategy, aligned with the United Nation’s SDGs.

Renaud Meyer, UN Development Programme (UNDP) Resident Representative to Thailand, said, “We support countries in achieving the UN Sustainable Development Goals through integrated solutions. Achieving the goals at global level requires the partnership of governments, private sector, civil society and citizens alike to make sure we leave a better planet for future generations. The Sustainable Development Goals Report developed by the private sector is one way to urge more constructive collaboration among sectors.”  

The report presents IVL’s progress in achieving the UN Sustainable Development Goals. The company outlined five focus areas for contributing to the SDGs: Recycling and the Circular Economy, Climate Change and Energy, Environmental Stewardship, Health Safety and Well-being, and CSR and Collaborations. IVL believes it can have the greatest impact on these areas while also growing its business and bringing about constructive change. Activities in these five areas help IVL align with 13 of the 17 SDGs, totaling 39 targets.

Yash Lohia, Chief Sustainability Officer at Indorama Ventures, said, “Businesses can make a significant contribution to achieving the UN Sustainable Development Goals. IVL, as a responsible industry leader, is committed to contributing to the SDGs and addressing the world's environmental and economic concerns. We need to be accountable to our stakeholders, including our 25,000 employees and their families, our customers and industry partners. Furthermore, we believe that complying with the SDGs will provide us with considerable business prospects.

Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester (c) Marchi & Fildi Group
Linea Gleaming
24.11.2021

Italian spinning group launches new metalloplastic yarns

  • Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester

With the goal to expand the offer of yarns coming from recycled raw materials for a textile more attentive to the consumption of resources, the MFT division of the Marchi & Fildi Group completes the range of metalloplastic yarns of its Gleaming collection with the insertion of 100% recycled polyester yarns coming from post-consumer material and with the GRS (Global Recycle Standard) certification.
Starting from recycled polyester with traceable origin, in compliance with environmental and social criteria extended to all the phases of the supply chain, metalloplastic yarns are obtained with the same esthetic features and performance, compared to similar products based on virgin raw materials.

  • Marchi & Fildi Group presents the selection of metalloplastic yarns with GRS certification of its Gleaming line, coming from 100% post-consumer recycled polyester

With the goal to expand the offer of yarns coming from recycled raw materials for a textile more attentive to the consumption of resources, the MFT division of the Marchi & Fildi Group completes the range of metalloplastic yarns of its Gleaming collection with the insertion of 100% recycled polyester yarns coming from post-consumer material and with the GRS (Global Recycle Standard) certification.
Starting from recycled polyester with traceable origin, in compliance with environmental and social criteria extended to all the phases of the supply chain, metalloplastic yarns are obtained with the same esthetic features and performance, compared to similar products based on virgin raw materials.

“Thanks to our commitment in the research of materials, we are able to propose metalloplastic yarns produced with 100% recycled material; the film used for the production of flat yarns, too, is in recycled polyester, with a quality level that is suitable for cutting – the Company explains -. Till now it was possible to find in the market only metalloplastic yarns with not recycled polyester flat yarn, twisted with certified fibers. This represents an important step forward to implement a circular economy possibility for this kind of products too”.

The Gleaming yarns GRS certified can be supplied in gold and silver, colors and transparent, in various counts, widths and types; they are suitable for use in flat and circular knitting, weaving, hosiery and as a component in fancy yarns.

The Gleaming line, with a wide selection of yarns in stock service, represents a completion of the offer of the Marchi & Fildi Group. The Gleaming yarns are offered in different thicknesses, widths and types with both metallized and transparent, iridescent, refracting and phosphorescent effects. The collection also includes items with special features of resistance to chemical and dyeing treatments. The Gleaming metalloplastic yarns find application in the world of fashion and furniture, for creative and fancy yarns and fabrics, accessories and decorations. Products with refractive features are also used in technical items like uniforms and workwear, sport garments and accessories, external ribbons and labels.

Source:

Marchi & Fildi Group

ISKO champions circularity and biodiversity at the Circular Fashion Summit 2021 (c) ISKO
Denim by ISKO
24.11.2021

ISKO champions circularity and biodiversity at the Circular Fashion Summit 2021

  • The leading denim ingredient brand joins lablaco’s virtual reality Circular Fashion Summit 2021 as an Innovation Partner

ISKO continues to reaffirm its commitment towards circularity by participating as an Innovation Partner in the Circular Fashion Summit 2021 by lablaco. The summit will bring together leaders of change across design, technology and sustainability to share knowledge and take action towards creating a circular future for fashion. The event will be held in a VR version of the Grand Palais Éphémère in Paris and will take place on 9-12 December.

ISKO’s approach to circularity is built on creating a future where no virgin resources are needed to produce beautiful durable and high performing woven fabrics To achieve this, the leading denim ingredient brand is working to remove its reliance on fossil fuels and virgin materials by employing only renewable energy and by setting the challenging target of using 100% recycled or reused materials.

  • The leading denim ingredient brand joins lablaco’s virtual reality Circular Fashion Summit 2021 as an Innovation Partner

ISKO continues to reaffirm its commitment towards circularity by participating as an Innovation Partner in the Circular Fashion Summit 2021 by lablaco. The summit will bring together leaders of change across design, technology and sustainability to share knowledge and take action towards creating a circular future for fashion. The event will be held in a VR version of the Grand Palais Éphémère in Paris and will take place on 9-12 December.

ISKO’s approach to circularity is built on creating a future where no virgin resources are needed to produce beautiful durable and high performing woven fabrics To achieve this, the leading denim ingredient brand is working to remove its reliance on fossil fuels and virgin materials by employing only renewable energy and by setting the challenging target of using 100% recycled or reused materials.

This impressive goal is possible thanks to the cutting edge technologies ISKO is working with such as a one of a kind process which fully separates and recycles cotton and polyester blends at scale, and collaborative partnerships with MoRe Research that are aimed at discovering new possibilities for cellulose based materials. ISKO’s new generation of R TWO™50+ fabrics are also playing a role in moving towards this goal. E ngineered for nature’ they use a minimum of 50% pre and post consumer recycled blend reducing carbon and water footprints by 45% and 65% respectively, and are all GRS certified ISKO also believes that the transition to a circular economy cannot happen without addressing the impact on biodiversity and our ecology. Tackling the over-sourcing of raw materials is key, as the extraction of new natural resources and the impact on carbon emissions in processing them contributes to more than 90% of biodiversity loss.

Source:

Menabò Group

24.11.2021

PERFORMANCE DAYS cancelled in Munich on December 1-2, 2021

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

The new measures are scheduled to come into effect in Munich from the middle of this week, which would lead to very short-term changes. The organizers of PERFORMANCE DAYS therefore see themselves in the responsibility to enable a minimum of planning security as well as a responsible handling of the given situation with this decision.

“Exceptional situations require exceptional decisions – making these all the more difficult. After experiencing a very successful and surprisingly well-attended fair with the Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon last week, we have tried everything possible up to the last moment and firmly believed that we would finally set a further positive milestone with the physical edition of PERFORMANCE DAYS in Munich. We fulfilled all the requirements, updated our hygiene concept several times to comply with the dynamically changing measures and took all the necessary precautions for a safe event. Unfortunately, current developments do not allow us to host the trade fair event next week, since the undisputed top priority is the protection and health of our visitors. Now our focus turns to the full implementation of the Digital Fair on December 1 and 2, 2021”, explains Marco Weichert, CEO of PERFORMANCE DAYS

Focus on digital platform
The PERFORMANCE DAYS team is now investing all its efforts into implementing the Digital Fair on December 1 and 2, 2021. As part of THE LOOP, those interested have the opportunity as of now to view online the fabric innovations and news for the Winter Season 2023/24, this year’s Focus Topic “Sustainable Nylon” and the latest color trends. In the Marketplace, visitors will be able to view the numerous exhibitor products, including the PERFORMANCE FORUM’s curated sustainable fabric highlights. In order to present the fabrics to visitors as realistically as possible in terms of feel, design and structure in digital form, the PERFORMANCE FORUM has been equipped with new 3D-technology, including innovative tools such as 3D images, video animations and downloadable U3M files. Throughout the Digital Fair, exhibitors and fair visitors can look forward to extensive networking opportunities. For example, as part of the extensive digital supporting program on December 1, with various expert talks, discussion rounds and speakers via livestream, moderated by Charles Ross live from the studio. On December 2, the “sustain & innovate” conference on this year’s Focus Topic “The Sustainable Future of Nylon” will kick off with discussions and panels, moderated by Astrid Schlüchter, Editor-in-Chief of SAZsport and SPORTSFASHION by saz.  

A very special thank you goes out to the entire PERFORMANCE DAYS community with its exhibitors, visitors and partners for their active support, trust, loyalty and understanding in these still extraordinary times. The team looks forward to the Digital Fair on December 1 and 2, 2021 and further ahead to meeting you all personally on April 27 and 28, 2022 at the summer edition of PERFORMANCE DAYS live in Munich.

Source:

Performance Days

22.11.2021

Sappi invests in Kirkniemi Mill on decarbonisation journey

Sappi has approved an investment in Kirkniemi Mill in Lohja, Finland which enables a switch in its energy sourcing to renewable bioenergy. With this investment the mill’s direct fossil greenhouse gas emissions will reduce by ca. 90 percent, which is equivalent to 230 000 tons of carbon dioxide annually.

The project, set for completion in early 2023, will contribute significantly to Sappi Europe’s decarbonisation roadmap by exiting coal at one of its last facilities partially using this fuel type. Biomass will then be used in Kirkniemi’s multi-fuel boiler, built in 2015. The move advances Sappi towards its 2025 targets which include reducing specific greenhouse gas emissions (scope 1 and 2) by 25 percent and increasing renewable energy share to 50 percent in Europe compared to 2019.

The investment will establish the equipment needed to receive, store and handle woody biomass like the bark, sawdust and wood chips used for biofuel production. Such biomass types are by-products from the forest-based industry and utilising them for energy production derives further value from the forest resource.

Sappi has approved an investment in Kirkniemi Mill in Lohja, Finland which enables a switch in its energy sourcing to renewable bioenergy. With this investment the mill’s direct fossil greenhouse gas emissions will reduce by ca. 90 percent, which is equivalent to 230 000 tons of carbon dioxide annually.

The project, set for completion in early 2023, will contribute significantly to Sappi Europe’s decarbonisation roadmap by exiting coal at one of its last facilities partially using this fuel type. Biomass will then be used in Kirkniemi’s multi-fuel boiler, built in 2015. The move advances Sappi towards its 2025 targets which include reducing specific greenhouse gas emissions (scope 1 and 2) by 25 percent and increasing renewable energy share to 50 percent in Europe compared to 2019.

The investment will establish the equipment needed to receive, store and handle woody biomass like the bark, sawdust and wood chips used for biofuel production. Such biomass types are by-products from the forest-based industry and utilising them for energy production derives further value from the forest resource.

In addition to increasing share of renewable energy, Sappi’s mills are also focused on reducing energy consumption. Sappi Kirkniemi Mill is party to Finland’s National Energy Efficiency Agreement and consistently reaches their energy saving targets. Kirkniemi’s ISO 50001 certification provides further evidence of the mill’s systematic improvement in energy efficiency.

Source:

Sappi Europe

22.11.2021

ECOSENSOR™ by Asahi Kasei Advance launches its FW 22/23 fabric collection

For its FW 22/23 collection, ECOSENSOR™ by Asahi Kasei Advance presents a high-tech fabric collection, which implements a new generation of values, with the aim of keeping nature, body and mind in harmony.

ECOSENSOR™’s new references meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Furthermore, they are made with certified ingredients, through a completely traceable and transparent production process and supply chain. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™’ stands out as a unique eco-high-tech performance proposition in its market.

The whole collection is focused on advanced technology and environmental responsibility. Thanks to ECOSENSOR™ by Asahi Kasei Advance’s unique value-chain based on recycling technology, most part of its yarns are certified by the renowned GRS (Global Recycled Standard). Even the dyeing and finishing phases - key moments for  performance wear - have been certified by international labels such as bluesign® and OEKO-TEX® Standard 100.

For its FW 22/23 collection, ECOSENSOR™ by Asahi Kasei Advance presents a high-tech fabric collection, which implements a new generation of values, with the aim of keeping nature, body and mind in harmony.

ECOSENSOR™’s new references meet the needs of the contemporary consumer, such as durability, wellbeing and performance. Furthermore, they are made with certified ingredients, through a completely traceable and transparent production process and supply chain. Being capable of combining active climate control, exquisite touch, lightness and comfort with sustainable values, ECOSENSOR™’ stands out as a unique eco-high-tech performance proposition in its market.

The whole collection is focused on advanced technology and environmental responsibility. Thanks to ECOSENSOR™ by Asahi Kasei Advance’s unique value-chain based on recycling technology, most part of its yarns are certified by the renowned GRS (Global Recycled Standard). Even the dyeing and finishing phases - key moments for  performance wear - have been certified by international labels such as bluesign® and OEKO-TEX® Standard 100.

Among the compositions of the fabrics, dominant are the recycled polyamide (58%) and polyester (39%) yarns. The stretch component present in 22 articles of the collection is based on ROICA™ EF by Asahi Kasei - the sustainable recycled stretch yarn made from pre-consumer waste. In addition, 8 fabrics of the FW22/23 collection are made of Bemberg™ by Asahi Kasei - the high-tech yarn born from the transformation of cotton linters through a fully circular, transparent and traceable process with an amazing precious hand, optimal moisture management characteristics,  whose end of life guarantees its biodegradability and it also carries GRS certification.

Featuring a total of 36 fabrics, the collection is composed of:

  • 7 outerwear fabric
  • 22 sportswear fabrics
  • 7 innerwear fabrics
Source:

GB Network

19.11.2021

GOTS appoints Protection Officer North America

Travis Wells, JD, MBA, has been appointed as GOTS Protection Officer North America. In this newly created position, he will be identifying and advising companies that are making unsubstantiated claims regarding GOTS signage.

An increasing number of companies are eager to use GOTS certified materials and want to make claims regarding GOTS content on their finished products. However, the correct use of the trademarked logo is strictly regulated in CUGS 3.1. – The conditions for the use of GOTS signs. A GOTS claim on finished products guarantees the consumer that every single step in the textile processing supply chain was certified. As soon as one stage in the supply chain is not certified, a company may not label or mention GOTS on their final product.

Travis Wells, JD, MBA, has been appointed as GOTS Protection Officer North America. In this newly created position, he will be identifying and advising companies that are making unsubstantiated claims regarding GOTS signage.

An increasing number of companies are eager to use GOTS certified materials and want to make claims regarding GOTS content on their finished products. However, the correct use of the trademarked logo is strictly regulated in CUGS 3.1. – The conditions for the use of GOTS signs. A GOTS claim on finished products guarantees the consumer that every single step in the textile processing supply chain was certified. As soon as one stage in the supply chain is not certified, a company may not label or mention GOTS on their final product.

As a Sustainable Supply Chain Director, Travis has more than 20 years of experience advising fashion and apparel-related businesses on sustainable sourcing, product development and manufacturing in domestic and global markets. He earned his Bachelor of Arts (B.A.) in International Studies from Vassar College, his Juris Doctorate (J.D.) in Corporate Law from George Washington University Law School and his Master of Business Administration (MBA) in Global Sustainability and Finance from the Gabelli School of Business at Fordham University.  

18.11.2021

Seven Senders: Klimaneutraler Versand im Onlinehandel

Nachhaltigkeit wird für Konsumenten beim Onlineshopping immer wichtiger – und damit auch für E-Tailer. Gleichzeitig steigen das Versandaufkommen und die transportbedingten CO2-Emissionen. Doch es geht auch anders: Seven Senders, eine Delivery-Plattform für den Cross-Border-Versand in Europa, begibt sich mit seiner Mission Zero nicht nur selbst auf den Weg zum klimaneutralen Unternehmen, sondern möchte auch Onlinehändler beim Klimaschutz unterstützen.

Orientierung am Pariser Klimaabkommen
Immer mehr Branchen erkennen die Bedeutung von Umwelt- und Klimaschutz. Und viele Unternehmen möchten in diesem Bereich selbst aktiv werden, um ihren Teil beizutragen. Als Orientierung dient dabei das Pariser Klimaabkommen: 2015 haben sich in Paris 196 Nationen dazu verpflichtet, die globale Erwärmung gemeinsam auf maximal 1,5 Grad zu begrenzen. Auch Seven Senders, die führende Delivery-Plattform in Europa, hat sich Nachhaltigkeit auf die Fahne geschrieben und verfolgt das Pariser Klimaziel: „Mit unserer Mission Zero möchten wir auf lange Sicht klimaneutral werden“, so Dr. Johannes Plehn, Gründer und CEO von Seven Senders.

Nachhaltigkeit wird für Konsumenten beim Onlineshopping immer wichtiger – und damit auch für E-Tailer. Gleichzeitig steigen das Versandaufkommen und die transportbedingten CO2-Emissionen. Doch es geht auch anders: Seven Senders, eine Delivery-Plattform für den Cross-Border-Versand in Europa, begibt sich mit seiner Mission Zero nicht nur selbst auf den Weg zum klimaneutralen Unternehmen, sondern möchte auch Onlinehändler beim Klimaschutz unterstützen.

Orientierung am Pariser Klimaabkommen
Immer mehr Branchen erkennen die Bedeutung von Umwelt- und Klimaschutz. Und viele Unternehmen möchten in diesem Bereich selbst aktiv werden, um ihren Teil beizutragen. Als Orientierung dient dabei das Pariser Klimaabkommen: 2015 haben sich in Paris 196 Nationen dazu verpflichtet, die globale Erwärmung gemeinsam auf maximal 1,5 Grad zu begrenzen. Auch Seven Senders, die führende Delivery-Plattform in Europa, hat sich Nachhaltigkeit auf die Fahne geschrieben und verfolgt das Pariser Klimaziel: „Mit unserer Mission Zero möchten wir auf lange Sicht klimaneutral werden“, so Dr. Johannes Plehn, Gründer und CEO von Seven Senders.

Nachhaltigkeit in der Logistik: Relevanz der letzten Meile
Nachhaltigkeit spielt zugleich bei den Kaufentscheidungen der Konsumenten eine immer größere Rolle: Das wirkt sich auch auf den E-Commerce-Markt aus: Für Onlineshops reicht es heutzutage nicht mehr, einfach nur schnell Pakete auszuliefern. Die Konsumenten wünschen sich, dass auch die Logistik den Klimaschutz berücksichtigt. Denn beim Paketversand – insbesondere über Grenzen hinweg – entsteht besonders viel klimaschädliches CO2. Vor allem die Lieferung auf der letzten Meile verursacht eine hohe C02-Belastung. Um hier die Nachhaltigkeit zu erhöhen, gibt es viele Möglichkeiten: beispielsweise eine optimierte Nachtzustellung, dynamische Tourenplanungen und den Ausbau von Paketstationen.

Was bedeutet klimaneutral?
Doch auch Onlinehändler selbst haben die Möglichkeit, etwas zum Umweltschutz beizutragen. „E-Tailer, die den Wunsch ihrer Kunden nach mehr Nachhaltigkeit berücksichtigen möchten, können auf einen klimaneutralen Versand umstellen“, so Dr. Plehn. Ein Versand ist grundsätzlich klimaneutral, wenn dabei kein CO2 entsteht, also zum Beispiel bei einer Zustellung per Fahrrad. Dass auf dem gesamten Lieferweg kein CO2 freigesetzt wird, ist für Onlinehändler in der Praxis jedoch kaum umsetzbar. Eine Alternative ist daher, die entstandenen Emissionen nachträglich auszugleichen. Dazu wird der CO2-Ausstoß der gesamten Lieferkette berechnet, der wiederum mit einer Investition in Umweltschutzprojekte oder klimafördernde Maßnahmen ausgeglichen werden kann. Durch diese Kompensation wird rechnerisch die Klimaneutralität wieder hergestellt. Onlinehändler haben die Möglichkeit, dies entweder direkt durch beispielsweise Baumpflanzungen zu tun oder indirekt, etwa durch die Förderung von Projekten zum Klimaschutz. Der direkte Weg ist für Onlinehändler sehr aufwendig und kostenintensiv. Darüber hinaus hat nicht jeder die Möglichkeit, selbst ein Umweltschutzprojekt zu starten. Hier kommt die Delivery-Plattform Seven Senders ins Spiel: Sie unterstützt E-Tailer mit 7SGreen auf dem Weg zum klimaneutralen Versand.

Unterstützung beim klimaneutralen Versand
Durch das umfassende Logistik-Know-how und den Digitalisierungsschwerpunkt gelingt es Seven Senders, die Lieferprozesse von Onlinehändlern transparent und klimaneutral zu gestalten. Mit 7SGreen hilft der Logistik-Experte E-Tailern zusätzlich, ihre Klimaziele zu erreichen und ermöglicht ihnen, ihren Kunden einen klimaneutralen Versand anzubieten: Mit drei Cent pro Sendung, die in zertifizierte Klimaschutzprojekte fließen, werden die transportbedingten CO2-Emissionen exakt ausgeglichen. „Onlinehändler erhalten zudem jährliche Zertifikate, die einen Überblick über die eingesparten Emissionen geben und mit denen sie ihr Engagement an ihre Kunden kommunizieren können“, so Dr. Plehn.
 
Nachhaltigkeit bei Liefer- und Softwareprozessen
Seven Senders unterstützt E-Tailer nicht nur bei der Umsetzung eines klimaneutralen Versands, sondern sorgt gleichzeitig für klimafreundlichere Liefer- und Softwareprozesse. Bei der Zusammenstellung ihres umfassenden Carrier-Netzwerks hat die Delivery-Plattform ihr Hauptaugenmerk auf verlässliche Zustellung, Transparenz und den entsprechenden CO2-Ausgleich gelegt. „Überall wo es geht, setzen wir zudem auf Carrier, die schon e-mobil unterwegs sind“, ergänzt der Gründer von Seven Senders. Weitere Lösungsansätze, die den Paketversand nachhaltiger gestalten, sind beispielsweise das Zusammenlegen von Sendungen, um so Leerfahrten zu vermeiden, oder die Erhöhung der Zustellrate durch vermehrte Lieferungen an Pick-up Points.

Source:

Seven Senders GmbH / HARTZKOM GmbH

17.11.2021

C.L.A.S.S. welcomes Sensil® BioCare by NILIT into its material hub

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

C.L.A.S.S. MATERIAL HUB is a careful selection of smart ingredients made by cutting-edge companies and innovators across the globe. The wide range includes transparent and traceable products, which can be natural/organic, up or re-cycled/able, or innovative and always representing a new generation of innovation that is minimizing its impact on people, environment, animals and oceans.

Sensil® BioCare sustainable premium Nylon fiber is enhanced with a technology, that helps lessen the persistence of textile waste in sea water and in landfills. With its embedded technology, if any microfibers of Sensil® BioCare garments are released during washing, they will be broken down at a quicker rate compared to conventional Nylon 6.6 fibers when they end up in the oceans. Tests were conducted in both landfill soil and sea water simulations to understand the potential impact of Sensil® BioCare on both ecosystems. Specifically, initial testing following the ASTM D6691 Standard Test Method For Determining Aerobic Biodegradation Of Plastic Materials In The Marine Environment and the ASTM D5511 Standard Test Method For Determining Anaerobic Biodegradation Of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions indicates that Sensil® BioCare yarns break down more rapidly (with a biodegradation of about 40% in 500 days) than conventional nylon. These promising findings point to reduced waste accumulation in both oceans and landfills.

NILIT, owner of the sustainable brand SENSIL®, has also teamed up with The Ocean Foundation’s Blue Resilience Initiative to reestablish and safeguard essential ocean meadows and other coastal habitats. These marine grasslands, which are being damaged at a rate of two football fields every hour, are vital ecosystems for sequestering CO2 from the atmosphere, thus reducing global warming and ocean acidification. In addition, ocean grasslands sustain sea life, defend coast lines against erosion and storm surge, and support economies around the world.

NILIT’s plant in Israel, who produce Sensil ® Biocare boosts, renowned certifications such as GRS (Global Recycled Standard)*, ISO 9001**, ISO 14001*** and ISO 45001****. Moreover, the company has already announced that all other plants in  the USA, China and Brazil will be ISO 14001 certified within 2021 and ISO 45001 certified within 2025. Worth to mention, 40% of Nilit’s team is made up of women.

Source:

C.L.A.S.S.

16.11.2021

RGE: Second Annual Update on Textile Fibre Innovation and Technology

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Amid the COVID-19 pandemic continuing to restrict travel and collaboration, RGE persisted in building upon existing partnerships, while entering into new agreements. Sateri strengthened its strategic collaboration with Infinited Fiber Company, participating in the company’s EUR30 million funding round, which attracted new and existing investors such as H&M Group, Adidas, BESTSELLER and Zalando.

New partnerships formed by RGE included a five-year textile recycling research collaboration with Nanyang Technological University Singapore, and a three-year strategic partnership with the Textile and Fashion Federation Singapore which seeks, among others goals, to advance research and innovation in circular economy approaches to fashion waste in Asia.

RGE’s in-house R&D team has made good progress in advancing its textile-to-textile project, focusing on producing quality viscose using recycled cotton textiles as feedstock. To support plans to build a textile recycling facility in Indonesia, and as part of commercial feasibility analysis, studies examining the availability of textile waste and textile recycling landscapes in China, Indonesia, Sri Lanka and Bangladesh were completed.

Sateri remains on track in developing a product with 50 per cent recycled content by 2023, and to reach 100 per cent by 2030. It also aims for 20 per cent of its feedstock to contain alternative or recycled materials by 2025. In this similar vein, APR will source 20 per cent of its feedstock from alternative or recycled materials by 2030.

Source:

RGE / Omnicom Public Relations Group

16.11.2021

Gina Tricot and We aRe SpinDye in a resource-efficient collaboration

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

Gina Tricot releases its first collection that has been produced with We aRe SpinDye. The collection is part of Gina Tricot's innovation program Gina Lab. and consists of a coat, shirt, trousers and two bags colored with We aRe SpinDye's method.

With the collaboration, Gina Tricot continues to focus on sustainability, now with the coloring process at the center. Of all the resources that arise during the entire lifespan of a garment - from the production of raw materials, to recycling, 80% is used during the production phase itself. To maximize the effects of the sustainability changeover, an increased focus is required on the entire production process and in particular on the most resource-intensive of them all: the dyeing.

One of Gina Tricot's focus is to explore new methods and technologies in sustainability, which makes the collaboration with We aRe Spin Dye feel just right for us. Together we get a product with more durable and circular fibers, in addition with a more sustainable textile production with a focus on minimal water use. We are extremely proud of this collaboration. says Emma Garrote, Global Production & Sustainability Manager at Gina Tricot.

Gina Tricot is a shining example of an agile organization with short decision-making processes. They have managed to enthuse both the design and production department. It has been crucial to reach the launch of this collection that takes place today, says Andreas Andrén, CEO of We aRe SpinDye®.

Gina Tricot
Gina Tricot is a Swedish fashion brand that offers fashion to women in over 30 countries. Today, Gina Tricot has over 160 stores around Sweden, Norway, Denmark and Finland, as well as e-commerce throughout Europe. With around 1,900 employees, 98% of these are girls. For Gina Tricot, it is important to build pride from the inside out, we are a company that chooses to invest in and highlight women.

We aRe Spin Dye
The company is a Swedish cleantech company that provides and offers a process and platform for production and quality control that enables players in the fashion and clothing industry to significantly reduce their environmental impact. The company's business concept is to establish a new, sustainable and transparent standard for dyeing synthetic textiles in the fashion and apparel industry in a simple and user-friendly way.

More information:
We are SpinDye We aRe Spin Dye
Source:

We aRe SpinDye

(c) Deutsche Lichtmiete
15.11.2021

Deutsche Lichtmiete: Nachhaltige Beleuchtungssanierung für IGEFA WEINBRENNER

Energie effizient nutzen – diese Mission verfolgt die IGEFA WEINBRENNER Energy Solutions GmbH mit einer Vielzahl von Innovationen. Als einer der führenden Hersteller von Wärmetauschern konzentriert sich das Handeln des Unternehmens dabei längst nicht nur auf die Wirksamkeit der angebotenen Systeme, sondern auf den gesamten Herstellungsprozess. Das betrifft auch vermeintliche Nebenschauplätze wie die Beleuchtung der Produktionshallen. Nach einer umfassenden Beleuchtungssanierung nutzt IGEFA WEINBRENNER – ebenso wie andere Unternehmen der ZILONIS Gruppe – nicht nur energie- und kostensparende LED-Technik, sondern auch das innovative Light as a Service Konzept der Deutschen Lichtmiete.

Energie effizient nutzen – diese Mission verfolgt die IGEFA WEINBRENNER Energy Solutions GmbH mit einer Vielzahl von Innovationen. Als einer der führenden Hersteller von Wärmetauschern konzentriert sich das Handeln des Unternehmens dabei längst nicht nur auf die Wirksamkeit der angebotenen Systeme, sondern auf den gesamten Herstellungsprozess. Das betrifft auch vermeintliche Nebenschauplätze wie die Beleuchtung der Produktionshallen. Nach einer umfassenden Beleuchtungssanierung nutzt IGEFA WEINBRENNER – ebenso wie andere Unternehmen der ZILONIS Gruppe – nicht nur energie- und kostensparende LED-Technik, sondern auch das innovative Light as a Service Konzept der Deutschen Lichtmiete.

„Als Hersteller von Produkten der Wärme- und Verfahrenstechnik wissen wir, wie wichtig effiziente und kostensparende Systeme in einer zukunftsorientierten Industrie sind“, sagt Musa Smakaj, Geschäftsführer von IGEFA WEINBRENNER. Nachhaltigkeit mitzudenken bestimmt hier sämtliche interne und externe Prozesse auf dem Weg zu maßgeschneiderten, kundenspezifischen Lösungen. „Unser Ziel ist, die CO2-Emissionen unserer Kunden anhaltend zu reduzieren“, so Smakaj und verweist auf eine Vielzahl von Forschungsprojekten bei ZILONIS, bei denen Themen wie Wasserstoffproduktion, Fernwärmeanbindung und Solarstrom im Mittelpunkt stehen.

 

Source:

Deutsche Lichtmiete / HARTZKOM

(c) Abu Dhabi Government Media Office
15.11.2021

Partnership between ADNOC and Borealis to expand Borouge Facility

  • ADNOC and Borealis confirm final investment agreement to build Borouge 4 in Ruwais, United Arab Emirates (UAE), which will produce 1.4 million tons of polyethylene per annum
  • Expansion project includes construction of a 1.5 million tonnes ethane cracker, two state-of-the-art Borstar® polyethylene plants and a cross-linked polyethylene plant
  • Borouge 4 will meet growing customer demand across the Middle East, Africa and Asia with differentiated polyolefin solutions in energy, infrastructure, and advanced packaging
  • New facility will benefit from industry-leading technologies to significantly improve energy efficiency and lower emissions, with carbon capture study underway
  • Upon expansion, Borouge will be the world's largest single-site polyolefin complex and will supply feedstock to TA'ZIZ Industrial Chemicals Zone Body

ADNOC and Borealis AG signed an USD 6.2 billion investment agreement to build the fourth Borouge facility – Borouge 4 – at the polyolefin manufacturing complex in Ruwais, United Arab Emirates (UAE).

  • ADNOC and Borealis confirm final investment agreement to build Borouge 4 in Ruwais, United Arab Emirates (UAE), which will produce 1.4 million tons of polyethylene per annum
  • Expansion project includes construction of a 1.5 million tonnes ethane cracker, two state-of-the-art Borstar® polyethylene plants and a cross-linked polyethylene plant
  • Borouge 4 will meet growing customer demand across the Middle East, Africa and Asia with differentiated polyolefin solutions in energy, infrastructure, and advanced packaging
  • New facility will benefit from industry-leading technologies to significantly improve energy efficiency and lower emissions, with carbon capture study underway
  • Upon expansion, Borouge will be the world's largest single-site polyolefin complex and will supply feedstock to TA'ZIZ Industrial Chemicals Zone Body

ADNOC and Borealis AG signed an USD 6.2 billion investment agreement to build the fourth Borouge facility – Borouge 4 – at the polyolefin manufacturing complex in Ruwais, United Arab Emirates (UAE).

The world-scale expansion confirms both partners’ commitment to the growth of Borouge and to support chemical production, and advanced manufacturing and industry in Ruwais, a key pillar of Abu Dhabi and the UAE’s technology, innovation and industrial development strategy. Borouge produces crucial industrial raw materials, which are exported to customers globally and used by local companies, boosting local industrial supply chains and enhancing In-Country Value.

Borouge 4 will capitalize on the projected growth in customer demand for polyolefins, driven by their use in manufactured products in the Middle East, Africa and Asia. The facility will also enable the next phase of growth at the Ruwais Industrial Complex by supplying feedstock to the TA’ZIZ Industrial Chemicals Zone.

Borouge 4 will have an industry-leading focus on sustainability leveraging the capabilities of both shareholders. The facility will utilize Borealis’ proprietary Borstar technology, to produce a product portfolio focused on durable applications for energy, infrastructure, advanced packaging, and agriculture sectors. This unique technology, in combination with hexene co-monomer, will enable the production of advanced packaging grades with up to 50% recycled polyethylene content.

Subject to an in-depth study, a Carbon Capture unit that would reduce CO2 emissions by 80% could also be operational in time for Borouge 4’s start-up. The facility is also designed to capitalize on ADNOC’s recent initiatives on clean energy, decarbonizing its power supply through access to Abu Dhabi’s clean power sources. These initiatives are aligned with the UAE Net Zero by 2050 Strategic Initiative.

The first Borouge facility, producing 450,000 tons of polyethylene per annum was commissioned in 2001. Borouge 2 and Borouge 3 took capacity to 2 million tons and 4.5 million tons of polyethylene and polypropylene per annum in 2010 and 2014 respectively.  Borouge 4 will boost the company’s annual polyolefin production to 6.4 million tons, making Borouge one of the world’s largest single-site polyolefin facilities.

The new Borouge 4 facility will comprise:

  • An ethane cracker, with 1.5 million tons ethylene output per annum, which will be the fourth cracker in Borouge’s integrated petrochemical complex in Ruwais
  • Two additional Borstar® polyethylene (PE) plants, each with 700 thousand tons per annum capacity, using state-of-the-art Borealis Borstar third generation (3G) technology
  • A cross-linked PE (XLPE) plant of 100 thousand tons per annum capacity.
  • A hexene-1 unit, which will produce co-monomers for certain grades of polyethylene.
Source:

Borealis

12.11.2021

Stahl to set Scope 3 carbon emission targets by mid 2022

Stahl, an active proponent of responsible chemistry, today announces that – by the end of Q2 2022 – it will extend its GHG reduction targets to cover Scope 3 emissions. This step underlines Stahl’s commitment to aligning its strategy with the 2015 Paris Climate Agreement goals, updated at the recent COP26 in Glasgow.

Between 2015 and 2020 Stahl reduced its Scope 1 and 2 (direct) GHG emissions by 37%, and has committed to a further 2% reduction each year to 2030. Scope 3 emissions cover all the indirect emissions that can occur in a company’s value chain, including raw material acquisition, transportation, and the end-of-life impact of its products. By focusing on Scope 3 emissions, Stahl is committing to de-fossilizing its supply chain and ensuring further accountability for its total environmental impact.

Stahl, an active proponent of responsible chemistry, today announces that – by the end of Q2 2022 – it will extend its GHG reduction targets to cover Scope 3 emissions. This step underlines Stahl’s commitment to aligning its strategy with the 2015 Paris Climate Agreement goals, updated at the recent COP26 in Glasgow.

Between 2015 and 2020 Stahl reduced its Scope 1 and 2 (direct) GHG emissions by 37%, and has committed to a further 2% reduction each year to 2030. Scope 3 emissions cover all the indirect emissions that can occur in a company’s value chain, including raw material acquisition, transportation, and the end-of-life impact of its products. By focusing on Scope 3 emissions, Stahl is committing to de-fossilizing its supply chain and ensuring further accountability for its total environmental impact.

Michael Costello, Stahl Group ESG Director: “Only by focusing on reducing Scope 3 emissions can we accurately align our de-fossilization strategy with the global goal of limiting global average temperature increase to 1.5°C, as agreed at the 2015 Paris Climate Agreement and the COP26 in Glasgow. We look forward to working with partners across our industry and value chain to make this happen.”

More information:
Stahl Stahl Group
Source:

Stahl Holdings B.V.

(c) EREMA Group GmbH
11.11.2021

EREMA awarded for the Recycling Machinery Innovation of the Year

EREMA is winner at this year´s Plastics Recycling Awards Europe. At the award ceremony as part of the Plastics Recycling Show Europe at 5th November in Amsterdam, EREMA was awarded for its recycling system INTAREMA® TVEplus® RegrindPro® + ReFresher in the category Recycling Machinery Innovation of the Year. Thanks to the combination of its recycling machine with the ReFresher technology that reduces odour downstream of the extrusion process, EREMA has enabled the PCR-HDPE produced with it to be used in proportions of up to 100 percent for the production of packaging for direct contact with food and beverages, as confirmed by the U.S. Food and Drug Administration (FDA).

The judges recongised this innovation as a step change in eliminating unwanted odour from waste plastics, allowing recyclate to replace virgin palstics in high end applications. This type of innovation is essential for meeting EU targets for recycled content of food contact plastics.
The market also confirms awarding this technology. By the end of 2021, EREMA customers will produce 450,000 tonnes of high-quality, odor-optimized regranulate per year, with it.

EREMA is winner at this year´s Plastics Recycling Awards Europe. At the award ceremony as part of the Plastics Recycling Show Europe at 5th November in Amsterdam, EREMA was awarded for its recycling system INTAREMA® TVEplus® RegrindPro® + ReFresher in the category Recycling Machinery Innovation of the Year. Thanks to the combination of its recycling machine with the ReFresher technology that reduces odour downstream of the extrusion process, EREMA has enabled the PCR-HDPE produced with it to be used in proportions of up to 100 percent for the production of packaging for direct contact with food and beverages, as confirmed by the U.S. Food and Drug Administration (FDA).

The judges recongised this innovation as a step change in eliminating unwanted odour from waste plastics, allowing recyclate to replace virgin palstics in high end applications. This type of innovation is essential for meeting EU targets for recycled content of food contact plastics.
The market also confirms awarding this technology. By the end of 2021, EREMA customers will produce 450,000 tonnes of high-quality, odor-optimized regranulate per year, with it.

More information:
EREMA Recycling
Source:

EREMA Group GmbH

11.11.2021

Berto travels zero km to support B2C brands

In 2021, Berto Industria Tessile embarked on a series of journeys through the denim supply chain, touching both B2B and B2C worlds.

The first journey of this adventure, aimed at discovering and publicizing the world of indigo and, began by talking about the collaboration with the turkish garment maker blue matters creating a green collection to be proposed to the world's top brands, continuing with “su mirura project” in the second chapter.
This project has its objective in supports, with a ready on stock fabrics, (which at this time of difficult availability of product becomes extremely relevant), young emerging talents in the world of fashion that, in our industry, both for problems related to  minimum order quantities and for problems related to financial commitments of startups, would having difficulty in the raw materials research.

In this third chapter of the personal voyage into the world of denim, Berto Industria Tessile talks about two realities that are not only made in Italy, but also made in veneto, for a zero km circularity supports.

In 2021, Berto Industria Tessile embarked on a series of journeys through the denim supply chain, touching both B2B and B2C worlds.

The first journey of this adventure, aimed at discovering and publicizing the world of indigo and, began by talking about the collaboration with the turkish garment maker blue matters creating a green collection to be proposed to the world's top brands, continuing with “su mirura project” in the second chapter.
This project has its objective in supports, with a ready on stock fabrics, (which at this time of difficult availability of product becomes extremely relevant), young emerging talents in the world of fashion that, in our industry, both for problems related to  minimum order quantities and for problems related to financial commitments of startups, would having difficulty in the raw materials research.

In this third chapter of the personal voyage into the world of denim, Berto Industria Tessile talks about two realities that are not only made in Italy, but also made in veneto, for a zero km circularity supports.

Two brands that are part of two different segments of the indigo world of b2c, one operating in the world of clothing and one in the creation of fashion accessories, but who have a common denominator between them, the use of 100% in their collections of denim fabric Berto.*

* See attached document for more information.

Source:

Berto Industria Tessile / EFFE-BI

10.11.2021

AFRY to digitalize Renewcell’s textile recycling processes

The Swedish textile recycling company, Renewcell, has chosen AFRY as partner in order to digitalize production operations in their plants in Kristinehamn and Sundsvall, Sweden. AFRY will deliver an Industrial IT solution, containing AFRY MES and AFRY ProTAK, to manage production information and secure both high quality, as well as high overall efficiency in the production. The delivered solution will serve as a hub for all production process information.

The Swedish textile recycling company, Renewcell, has chosen AFRY as partner in order to digitalize production operations in their plants in Kristinehamn and Sundsvall, Sweden. AFRY will deliver an Industrial IT solution, containing AFRY MES and AFRY ProTAK, to manage production information and secure both high quality, as well as high overall efficiency in the production. The delivered solution will serve as a hub for all production process information.

Renewcell is a multi-award-winning textile recycling company based in Sweden. With the technology they have developed, the company has succeeded in recycling and regenerating textile fiber from old clothes to turn it back into fiber pulp. Renewcell has had a production site in Kristinehamn since 2017 and is now scaling up the production in their new production plant in Sundsvall. The new plant is expected to be operating during the first half of 2022. “Modern production and logistics require a high level of digitalization to meet the demands for, e.g., traceability, and therefore the systems and experience from AFRY will be very important to us,” says Ylva Stjernquist, Supply Chain Manager and Project Leader at Renewcell.

AFRY has a long experience in Industrial IT and will now deliver the two leading, closely integrated digital solutions for production management to Renewcell. The AFRY MES (Manufacturing Execution System) is a highly advanced digital information system that connects, monitors, and controls the complex production systems and data flows of the production processes. AFRY ProTAK is a digital tool that measures the effectiveness of a plant’s production machine performance. The system gathers information from different sources (e.g., DCS, MES, Maintenance) and combines that with the operators’ notes to calculate or present Overall Equipment Efficiency (OEE), which will lead to optimized production and increased profitability.

Together these tools will improve traceability and secure a high production efficiency by integrating data from all production systems and equipment. “We are focusing on improving sustainability within process industries, and it is therefore an honor to be part of Renewcell’s textile recycling through a full-scale digitalized solution. Our modern and competitive digital solution will definitely bring added value to these types of processes,” says David Andersson, Business Segment Manager Digitalization, AFRY Process Industries Sweden.  

AFRY MES and AFRY ProTAK will be installed to both Kristinehamn and Sundsvall plants. The installation is planned to be up and running during Q2 2022.

Source:

Process Industries Sweden

Mainetti bringt innovative Paperform Kleiderbügel auf den Markt (c) Mainetti
Paperform Kleiderbügel Linie
10.11.2021

Mainetti bringt innovative Paperform Kleiderbügel auf den Markt

  • Zeit für ein neues Konzept von nachhaltigen Kleiderbügeln aus Papier, um Kleidung stilvoll zu präsentieren

Mainetti präsentiert die Paperform Kleiderbügel Linie, die Einzelhändlern eine nachhaltige und erneuerbare Option seines Kleiderbügel Portfolios bietet. Hergestellt aus recyceltem Papier, und optionalen Metallelementen, ist der Bügel komplett frei von Plastik und vollständig recyclebar. Die innovative Bandbreite des führenden Lieferketten-Lösungsanbieters bietet verschiedene Kleiderbügel-Varianten.
Mainetti fokussiert sich auf die Innovation des Produkts, mit dem Design im Mittelpunkt. Mainetti Paperform Kleiderbügel weisen herausragende Funktionalität und technische Qualitäten auf, indem sie ein besonderes, hochleistungsfähiges und recyceltes Papier anstelle von Plastik verwenden.

Die Kollektion wurde über einen Zeitraum von zwei Jahren entwickelt und hat neben entsprechenden Investitionen auch drei internationale Patente hervorgebracht. Die Produktion verwendet eigens entwickelte Maschinen und ein einzigartiges Verfahren innerhalb eines Systems, welches komplett im Besitz von Mainetti ist.

  • Zeit für ein neues Konzept von nachhaltigen Kleiderbügeln aus Papier, um Kleidung stilvoll zu präsentieren

Mainetti präsentiert die Paperform Kleiderbügel Linie, die Einzelhändlern eine nachhaltige und erneuerbare Option seines Kleiderbügel Portfolios bietet. Hergestellt aus recyceltem Papier, und optionalen Metallelementen, ist der Bügel komplett frei von Plastik und vollständig recyclebar. Die innovative Bandbreite des führenden Lieferketten-Lösungsanbieters bietet verschiedene Kleiderbügel-Varianten.
Mainetti fokussiert sich auf die Innovation des Produkts, mit dem Design im Mittelpunkt. Mainetti Paperform Kleiderbügel weisen herausragende Funktionalität und technische Qualitäten auf, indem sie ein besonderes, hochleistungsfähiges und recyceltes Papier anstelle von Plastik verwenden.

Die Kollektion wurde über einen Zeitraum von zwei Jahren entwickelt und hat neben entsprechenden Investitionen auch drei internationale Patente hervorgebracht. Die Produktion verwendet eigens entwickelte Maschinen und ein einzigartiges Verfahren innerhalb eines Systems, welches komplett im Besitz von Mainetti ist.

Paperform Kleiderbügel sind weltweit erhältlich und eignen sich gleichermaßen für den Transport wie für die Präsentation. Die Partner im Einzelhandel können sich des Produkts auf eine 100% umweltfreundliche Art und Weise entledigen, indem sie die Bügel am Ende der Nutzung dem jeweils heimischen Recyclingkreislauf hinzufügen. Mainetti Paperform Kleiderbügel sind Teil der langen Innovations-Tradition innerhalb der Firma. Vor 40 Jahren hat Mainetti sein industriebestimmendes Wiederverwertungs- und Recycling System für Kleiderbügel eingeführt. Heute bietet Mainetti dieses Programm seinen weltweiten Einzelhandelspartnern an und unterhält zu diesem Zweck 30 Wiederverwertungs- und Recycling-Zentren auf der ganzen Welt.

Source:

Finn Partners Deutschland

10.11.2021

New JEC Group Publication

  • COMPOSITES SUSTAINABILITY REPORT 2021  

JEC Group in collaboration with EuCIA has published the first edition of the Composites Sustainability report 2021. This report seeks to give highlights about the part composite materials are playing in creating the sustainable European economy of the future.   

The contents of the book are comprehensive: starting with discussions around the widely recognised Life  Cycle  Assessment  methodology  for  calculating  the  environmental  impact  of  products,  it then 
moves through a series of analyses and case studies presenting the Circular Economy approach and ranging from raw materials (including bio-based) to industrial components.    

  • COMPOSITES SUSTAINABILITY REPORT 2021  

JEC Group in collaboration with EuCIA has published the first edition of the Composites Sustainability report 2021. This report seeks to give highlights about the part composite materials are playing in creating the sustainable European economy of the future.   

The contents of the book are comprehensive: starting with discussions around the widely recognised Life  Cycle  Assessment  methodology  for  calculating  the  environmental  impact  of  products,  it then 
moves through a series of analyses and case studies presenting the Circular Economy approach and ranging from raw materials (including bio-based) to industrial components.    

The purpose of the work, rather than results, which quickly become obsolete, is to give examples of approaches contributing to and moving towards sustainability. To do so, JEC Group has arbitrarily split
the value chain into five parts:
• Background, LCA, circular economy ;  
• Concept, design, raw materials ;  
• Production, processes, waste ;  
• Recycling, recovery ;
• Applications. 
 
The book “Composites sustainability Report 2021” is for sale online.