From the Sector

Reset
124 results
19.11.2021

GOTS appoints Protection Officer North America

Travis Wells, JD, MBA, has been appointed as GOTS Protection Officer North America. In this newly created position, he will be identifying and advising companies that are making unsubstantiated claims regarding GOTS signage.

An increasing number of companies are eager to use GOTS certified materials and want to make claims regarding GOTS content on their finished products. However, the correct use of the trademarked logo is strictly regulated in CUGS 3.1. – The conditions for the use of GOTS signs. A GOTS claim on finished products guarantees the consumer that every single step in the textile processing supply chain was certified. As soon as one stage in the supply chain is not certified, a company may not label or mention GOTS on their final product.

Travis Wells, JD, MBA, has been appointed as GOTS Protection Officer North America. In this newly created position, he will be identifying and advising companies that are making unsubstantiated claims regarding GOTS signage.

An increasing number of companies are eager to use GOTS certified materials and want to make claims regarding GOTS content on their finished products. However, the correct use of the trademarked logo is strictly regulated in CUGS 3.1. – The conditions for the use of GOTS signs. A GOTS claim on finished products guarantees the consumer that every single step in the textile processing supply chain was certified. As soon as one stage in the supply chain is not certified, a company may not label or mention GOTS on their final product.

As a Sustainable Supply Chain Director, Travis has more than 20 years of experience advising fashion and apparel-related businesses on sustainable sourcing, product development and manufacturing in domestic and global markets. He earned his Bachelor of Arts (B.A.) in International Studies from Vassar College, his Juris Doctorate (J.D.) in Corporate Law from George Washington University Law School and his Master of Business Administration (MBA) in Global Sustainability and Finance from the Gabelli School of Business at Fordham University.  

(c) Kai-Chieh Kuo
17.11.2021

ITA PhD student Kai-Chieh Kuo was awarded Best Master’s Thesis Award of Walter Reiners-Stiftung

Kai-Chieh Kuo, PhD student at the Institut für Textiltechnik (ITA) of RWTH Aachen University, was awarded the German Textile Mechanical Engineering 2021 Best Master's Thesis Award for his master's thesis entitled "Modification of the tube weaving process of fine yarns for the production of woven ultra-low profile stent grafts". The prize is endowed with 3,500€. Peter D. Dornier, Chairman of the Board of the Walter Reiners-Stiftung (Foundation), virtually presented the award on the occasion of the ADD International Textile Conference on 9 November 2021.

Kai-Chieh Kuo, PhD student at the Institut für Textiltechnik (ITA) of RWTH Aachen University, was awarded the German Textile Mechanical Engineering 2021 Best Master's Thesis Award for his master's thesis entitled "Modification of the tube weaving process of fine yarns for the production of woven ultra-low profile stent grafts". The prize is endowed with 3,500€. Peter D. Dornier, Chairman of the Board of the Walter Reiners-Stiftung (Foundation), virtually presented the award on the occasion of the ADD International Textile Conference on 9 November 2021.

Minimally invasive endovascular aortic repair (EVAR) with textile stent-graft systems is nowadays a clinically established therapy procedure for the treatment of abdominal aortic aneurysms (AAA) – pathological bulges of the aorta. Due to the thick profile of the folded stent graft systems, there is currently a high risk of injuring narrowed or highly angulated access vessels from the inside during implantation. Stent graft systems with smaller profiles could provide an improvement, which could overcome complicated access routes through a lower bending stiffness. One possible approach for reducing the system profiles is the use of thin-walled tubular woven fabrics made of ultrafine multifilament yarns (≤20 dtex) as graft material.

Up to now, it has not been possible to process the fine yarns with the required high thread density (>200 threads/cm) and the available weaving technology in order to guarantee sufficient tightness against blood.

In his master's thesis, Kai-Chieh Kuo made high-density tubular weaving of ultra-fine filament yarns possible for the first time by means of suitable modifications to a shuttle loom as well as adaptations in the weaving preparation. In particular, he developed a new innovative reed technology that reduces warp thread friction during the shedding process and thus improves the process stability of the dense tube weaving process of fine yarns.

With the help of the process modification, it was then possible to produce high-density, thin-walled tubular woven fabrics, which were positively evaluated with regard to their suitability for a stent graft. Above all the potential of these tubular fabrics lies in their extremely thin-walled fabric profile, which seals well against blood. By using these new types of tubular fabrics as graft material for stent grafts, the system profile of the folded stent graft system can be reduced without having to compromise the blood tightness of the implant. The technology developed by Mr Kuo is not only applicable to stent graft systems, but also offers great possibilities for use in all other endovascular implants such as trans catheter heart valves, covered stents and small-lumen vascular prostheses.

Mahlo: Two heads of subsidiaries celebrate anniversaries (c) Mahlo
Michel Bruni, CEO of Mahlo Italia
16.11.2021

Mahlo: Two heads of subsidiaries celebrate anniversaries

At the subsidiaries of the German Mahlo GmbH + Co KG, two branch managers are celebrating anniversaries this year. Alan Lavore, CEO of Mahlo America Inc., has been with the machine builder for 25 years. Michel Bruni, CEO of Mahlo Italia, has been part of the Mahlo family for 40 years.

Bruni began his career at Mahlo in 1981 as a service technician in the French branch Mahlo Ouest. Just one year later, he moved to Mahlo Italia, where he was appointed branch manager in 1996. He still holds this position today. Bruni is also sales manager for the Benelux countries, the Maghreb countries and Madagascar. The Mahlo Italia CEO's recipe for success includes expertise paired with experience and passion. To remain loyal to a company for so many years also testifies to a special relationship. "Then as now, I work with a dynamic and committed team. We also have a very good relationship with the employees of the parent company in Germany," says Bruni.

At the subsidiaries of the German Mahlo GmbH + Co KG, two branch managers are celebrating anniversaries this year. Alan Lavore, CEO of Mahlo America Inc., has been with the machine builder for 25 years. Michel Bruni, CEO of Mahlo Italia, has been part of the Mahlo family for 40 years.

Bruni began his career at Mahlo in 1981 as a service technician in the French branch Mahlo Ouest. Just one year later, he moved to Mahlo Italia, where he was appointed branch manager in 1996. He still holds this position today. Bruni is also sales manager for the Benelux countries, the Maghreb countries and Madagascar. The Mahlo Italia CEO's recipe for success includes expertise paired with experience and passion. To remain loyal to a company for so many years also testifies to a special relationship. "Then as now, I work with a dynamic and committed team. We also have a very good relationship with the employees of the parent company in Germany," says Bruni.

The culture and integrity with which business is conducted in the family-owned company were among the reasons why Mahlo America Inc. CEO Alan Lavore has also been with Mahlo for 25 years. "I just love working with all the great people at Mahlo." Lavore joined Mahlo in 1996 as a territory sales manager and took over as CEO in 2005. During this time, he drove the company's expansion from a textile specialist to a supplier for various production sectors such as film, paper, coating and converting or nonwovens.

More information:
Mahlo nonwovens Automation
Source:

Mahlo GmbH + Co. KG

Montalvo promotes Bryon Williams to Chief Executive Officer (c) Montalvo
Bryon Williams, Chief Executive Officer
12.11.2021

Montalvo promotes Bryon Williams to Chief Executive Officer

Montalvo has promoted Bryon Williams to Chief Executive Officer (CEO). Having previously served as Montalvo’s Chief Operating Officer (COO), Mr. Williams will continue to develop, expand, and execute Montalvo’s short-term and long-term growth strategies expanding into new markets, developing Montalvo’s product line, strengthening Montalvo’s international presence, and growing Montalvo’s market.  

Montalvo has promoted Bryon Williams to Chief Executive Officer (CEO). Having previously served as Montalvo’s Chief Operating Officer (COO), Mr. Williams will continue to develop, expand, and execute Montalvo’s short-term and long-term growth strategies expanding into new markets, developing Montalvo’s product line, strengthening Montalvo’s international presence, and growing Montalvo’s market.  

Mr. Williams says “It has been such an honor working at this company over the past 11 years, and I only see greater success for the company as Montalvo has one of the strongest teams in its history, with a focus on innovation and achieving our vision of becoming the global leader in Web Control Systems and solutions. We are expanding our reach into new industries and will be coming out with new products and solutions that reset expectations on Web Control, while at the same time branching out to offer customers complete solutions for their Web Handling needs through in-house capabilities and a strong partner network. We continue to provide one of the highest levels of application, product, and process knowledge, and are constantly recognized by our customers for providing levels of support and service that others simply can’t.”

Source:

Montalvo

DiloGroup: successful INDEX exhibition (c) DiloGroup
DiloGroup at the INDEX
10.11.2021

DiloGroup: successful INDEX exhibition

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

Dilo presented its latest developments in industry 4.0. Systematic plant monitoring and analysis of machine data allows simplified operation and more effective production. This smart system was illustrated with the aid of live analysis of the performance, quality and availability parameters of the production lines in our Textile Research Centre. The new production systems Hyperpunch Alpha, HyperTex and 3D-Lofter were explained with the aid of videos which led to a very positive responsive from the many different producers which are interested in running trials at the Dilo Textile Research Centre to further explore these subjects. These highlights and further new developments were the basis for fruitful technical discussions.

Source:

Oskar Dilo Maschinenfabrik KG

VDMA: Top young talent with cutting-edge topics  (c) VDMA
The 2021 winners (from top left to right): Dr Martin Hengstermann, Irina Kuznik, Kai-Chieh Kuo.
10.11.2021

VDMA: Top young talent with cutting-edge topics

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

Mr Kai-Chieh Kuo was awarded the diploma/master's thesis promotion prize of 3,500 euros. With his master's thesis, which was written at RWTH Aachen University, Mr Kuo contributes to the production of vital components used in medicine. The stents made of ultra-fine yarns are made possible by an innovative modification of the classic tube weaving process.

The Walter Reiners Foundation rewarded the doctoral thesis of Dr. Martin Hengstermann with the promotional prize in the dissertation category, endowed with 5,000 euros. The thesis deals with the production of recycled carbon fibres. These can be used to produce lightweight components for motor vehicle and aircraft construction or the wind energy sector.

New Prize Sustainability / Circular Economy
The environmental conditions of the textile industry and machine construction are changing. Topics such as climate protection and the circular economy are becoming central. From this perspective, the board of the Walter Reiners Foundation has decided to further develop the foundation's prize system.

In 2022, the foundation will for the first time offer a prize with a focus on design / sustainability. Peter D. Dornier, Chairman of the Foundation, explained: "Already in the design phase, one can set the parameters so that a textile product can be reintroduced after use into the economic cycle for a high-quality application. For example, through the appropriate use of materials and finishing. We are looking for solutions for resource-saving design, technology and manufacturing processes."   

(c) TMAS
The new TMAS board members (left to right) Sven Öquist, Jerker Krabbe and Semir Pavlica.
08.11.2021

TMAS has appointed three new members to its board

Jerker Krabbe of Eton Systems, Semir Paclica of Baldwin Technology and Sven Öquist of Coloreel will contribute a wealth of experience from a wide range of industries to the Swedish Textile Machinery Association.

Jerker Krabbe joined Eton Systems, one of the leaders in intelligent overhead conveyor systems, as CEO six months ago, and has more than 25 years of commercial, operational and international experience within several well-known companies such as Electrolux, Husqvarna, Gunnebo and Assa Abloy, and most recently as CEO of Sector Alarm AB.

Semir Pavlica has a master’s in finance and started his career at the SEB banking group before joining Baldwin Technology five ago. He is now managing the company’s process improvement and performance.

Sven Öquist joined Coloreel as Vice President of Sales in April this year. He has an international background with previous positions as Managing Director/CEO for a number of Swedish companies. He has also led the global sales team at Polestar, the electrified brand of Volvo Cars.

 

Jerker Krabbe of Eton Systems, Semir Paclica of Baldwin Technology and Sven Öquist of Coloreel will contribute a wealth of experience from a wide range of industries to the Swedish Textile Machinery Association.

Jerker Krabbe joined Eton Systems, one of the leaders in intelligent overhead conveyor systems, as CEO six months ago, and has more than 25 years of commercial, operational and international experience within several well-known companies such as Electrolux, Husqvarna, Gunnebo and Assa Abloy, and most recently as CEO of Sector Alarm AB.

Semir Pavlica has a master’s in finance and started his career at the SEB banking group before joining Baldwin Technology five ago. He is now managing the company’s process improvement and performance.

Sven Öquist joined Coloreel as Vice President of Sales in April this year. He has an international background with previous positions as Managing Director/CEO for a number of Swedish companies. He has also led the global sales team at Polestar, the electrified brand of Volvo Cars.

 

Indorama Ventures strengthens its management council with new role rotations (c) Indorama Ventures Public Company Limited
02.11.2021

Indorama Ventures strengthens its management council with new role rotations

Indorama Ventures Public Company Limited announced it has strengthened its Indorama Management Council (IMC) – the company’s highest operational management committee – by rotating experienced executives and adding the COOs of the Fibers and Integrated Oxides & Derivatives (IOD) segments.

The elevation of Mr Christopher Kenneally, COO of Fibers, and Mr Alastair Port, COO of IOD, to the IMC – will enable more agile decision making as they build their high-growth segments into self-sustaining organizations that maximize value for IVL stakeholders. The appointments are effective immediately.

Indorama Ventures Public Company Limited announced it has strengthened its Indorama Management Council (IMC) – the company’s highest operational management committee – by rotating experienced executives and adding the COOs of the Fibers and Integrated Oxides & Derivatives (IOD) segments.

The elevation of Mr Christopher Kenneally, COO of Fibers, and Mr Alastair Port, COO of IOD, to the IMC – will enable more agile decision making as they build their high-growth segments into self-sustaining organizations that maximize value for IVL stakeholders. The appointments are effective immediately.

In a rotation of roles, Mr Sanjay Ahuja, the current CFO of IVL, will switch to Interim COO of Combined PET (CPET) for a period of 2 years, effective January 2022, as part of a rotation of senior expertise across the IMC. He will report to Mr D K Agarwal as CEO, who will take on additional broader responsibilities as CFO. The CPET role rotation will enable new dynamism in this largest segment of IVL and establish a self-sustaining organization for the permanent successor that IMC selects over this period. Mr Agarwal will be supported by Mr Ashok Jain in an enhanced role as Controller, covering Banking & Finance, Global Consolidation, Taxation and M&A.

Further, Mr Klaus Holz will join the IMC as Chief Human Resources Officer, effective 1 January 2022. He replaces Mr Roberto Bettini who will retire at the end of 2021.

Source:

Indorama Ventures Public Company Limited

(c) Montalvo
Mike Cunningham, Europe Director of Sales and Service
28.10.2021

Montalvo names new European Director of Sales and Service

Montalvo, international specialist in web tension control, has hired Mr. Mike Cunningham as their new Europe Director of Sales and Service. Mr. Cunningham will oversee Montalvo’s European sales and service efforts, implementing Montalvo’s regional strategy, increasing and developing the sales service, and support for Montalvo across EMEA. Mr. Cunningham’s primary responsibilities include: developing and coordinating partnerships, forming new alliances with key players while bringing new innovations into the market, and leading both Montalvo’s direct sales, technical, and customer service teams, as well as their resellers and distributors.

Montalvo Chief Executive Officer Bryon Williams said, “This is very exciting for all of us here at Montalvo, as we are expanding our European foothold and market. Mike brings an exciting energy to the team and the market, with a unique perspective and customer focus to which our customers are already responding well. In addition, Mike is bringing new ideas and innovations to our growing business while expanding our reach and responsiveness in the EMEA region. We look forward to what the future holds.”

Montalvo, international specialist in web tension control, has hired Mr. Mike Cunningham as their new Europe Director of Sales and Service. Mr. Cunningham will oversee Montalvo’s European sales and service efforts, implementing Montalvo’s regional strategy, increasing and developing the sales service, and support for Montalvo across EMEA. Mr. Cunningham’s primary responsibilities include: developing and coordinating partnerships, forming new alliances with key players while bringing new innovations into the market, and leading both Montalvo’s direct sales, technical, and customer service teams, as well as their resellers and distributors.

Montalvo Chief Executive Officer Bryon Williams said, “This is very exciting for all of us here at Montalvo, as we are expanding our European foothold and market. Mike brings an exciting energy to the team and the market, with a unique perspective and customer focus to which our customers are already responding well. In addition, Mike is bringing new ideas and innovations to our growing business while expanding our reach and responsiveness in the EMEA region. We look forward to what the future holds.”

Mr. Cunningham has a background in product design and engineering and complex bespoke industrial solutions with a bias towards computing and networking solutions in the manufacturing industry. Mr. Cunningham holds an engineering degree from the prestigious Brunel University School in London.

Source:

The Montalvo Corporation

With the "SmartTex" shirt, astronauts can wear the necessary sensors comfortably on their bodies. © DLR
SmartTex Shirt
27.10.2021

Research for cosmic missions: SmartTex provides data on vital functions

It looks like a normal shirt, but it has it all: The new SmartTex shirt uses integrated sensors to transfer physiological data from astronauts to Earth via a wireless communication network. In this way, the effects of the space environment on the human cardiovascular system will be evaluated and documented, especially with regard to long-term manned space missions. Developed by the German Aerospace Center (DLR) in cooperation with DSI Aerospace Technology, the Medical Faculty of Bielefeld University and textile research partner Hohenstein, SmartTex will be tested for the first time as part of the Wireless Compose-2 (WICO2) project by German ESA astronaut Dr. Matthias Maurer, who will leave for his ‘Cosmic Kiss’ mission on the International Space Station (ISS) for six months on October 30, 2021.

It looks like a normal shirt, but it has it all: The new SmartTex shirt uses integrated sensors to transfer physiological data from astronauts to Earth via a wireless communication network. In this way, the effects of the space environment on the human cardiovascular system will be evaluated and documented, especially with regard to long-term manned space missions. Developed by the German Aerospace Center (DLR) in cooperation with DSI Aerospace Technology, the Medical Faculty of Bielefeld University and textile research partner Hohenstein, SmartTex will be tested for the first time as part of the Wireless Compose-2 (WICO2) project by German ESA astronaut Dr. Matthias Maurer, who will leave for his ‘Cosmic Kiss’ mission on the International Space Station (ISS) for six months on October 30, 2021.

"We were already able to gain valuable insights into the interaction of the body, clothing and climate under microgravity conditions during the previous projects Spacetex (2014) and Spacetex2 (2018)," explains Hohenstein Senior Scientific Expert Dr. Jan Beringer. The insights provided at the time by the mission of ESA astronaut Dr. Alexander Gerst have now been directly incorporated into the development of the new SmartTex shirt at Hohenstein. "Matthias Maurer can wear his tailor-made shirt comfortably on his body during his everyday work on the International Space Station. For this, we used his body measurements as the basis for our cut development and the production of the shirt. We integrated the necessary sensors as well as data processing and communication modules into the shirt's cut in such a way that they interfere as little as possible and are always positioned in the right place, regardless of the wearing situation. This is the prerequisite for reliably measuring the relevant physiological data." The SmartTex shirt is intended to provide a continuous picture of the vital functions of astronauts. This will be particularly relevant for future long-term manned space missions to the Moon and Mars.

For example, during the BEAT experiment (Ballistocardiography for Extraterrestrial Applications and long-Term missions), Matthias Maurer will be the first astronaut to wear a T-shirt equipped with sensors that measure his ballistocardiographic data such as pulse and relative blood pressure. For this purpose, the sensors were calibrated in the :envihab research facility at the DLR Institute of Aerospace Medicine in Cologne. Details on the contraction rate and opening and closing times of the heart valves, which are normally only accessible via sonography or computer tomography, can also be read from the data material. The goal is to study the effects of the space environment on the human cardiovascular system. To be able to analyse these effects realistically, Matthias Maurer's ballistocardiographic data will be recorded before, during and after his stay on the ISS. For the future, a technology transfer of the SmartTex shirt for application in the field of fitness or even in telemedicine is conceivable.

Wireless Compose-2 (WICO2)
The project was planned and prepared by the German Aerospace Center (DLR) and its cooperation partners DSI Aerospace Technology, Hohenstein and the University of Bielefeld. The wireless communication network reads sensor data and can determine the position of people and objects in space by propagation times of radio pulses. It is also available as a platform for several experiments on the ISS. The determined data is temporarily stored within the network and read out at regular intervals by the astronauts. These data packets are then transferred to Earth via the ISS link and analysed by the research teams. It can generate its own energy from artificial light sources via solar cells.

 

 

ESA astronaut Dr. Matthias Maurer in summer 2021 during preliminary talks on the Cosmic Kiss mission in DLR's :envihab in Cologne. © DLR


Sensors measure physiological data during a test run on Earth. © DLR


With the "SmartTex" shirt, astronauts can wear the necessary sensors comfortably on their bodies. © DLR

Dr. Jan Beringer, Hohenstein Senior Scientific Expert. © Hohenstein

(c) Montalvo Corporation
Russ Hall, North America Director of Sales & Service
20.10.2021

Montalvo names new North America Director of Sales & Service

Montalvo, international specialists in web tension control, has promoted Russ Hall to North America Director of Sales & Service.  Mr. Hall’s primary responsibilities are overseeing Montalvo’s North America sales team by building, managing, and maintaining new business strategies. In addition, Mr. Hall will be developing relationships with our existing and new industry partners.

Mr. Hall holds an undergraduate degree in Biomedical Technology and a graduate degree in NGO Leadership & Development. Over the last 30 years, Mr. Hall has held service, sales, and management positions with multiple technology companies. Mr. Hall joined the Montalvo technical and sales team two years ago.

Montalvo, international specialists in web tension control, has promoted Russ Hall to North America Director of Sales & Service.  Mr. Hall’s primary responsibilities are overseeing Montalvo’s North America sales team by building, managing, and maintaining new business strategies. In addition, Mr. Hall will be developing relationships with our existing and new industry partners.

Mr. Hall holds an undergraduate degree in Biomedical Technology and a graduate degree in NGO Leadership & Development. Over the last 30 years, Mr. Hall has held service, sales, and management positions with multiple technology companies. Mr. Hall joined the Montalvo technical and sales team two years ago.

More information:
Montalvo web tension control
Source:

Montalvo Corporation

During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever. (c) PREMIUM GROUP
SEEK
06.10.2021

SAVE THE DATE: Frankfurt, January 2022

  • HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

  • HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

„No city in Germany - no city in Europe - stands for business relevance and trading power as much as Frankfurt am Main,“ explains Tillmann. „We now have a unique opportunity to actively shape the future together. PREMIUM GROUP provides the industry with the platform, the brands with the creative content. In addition, we do what we do best, introduce the right players to each other and connect them. We bring together the movers and shakers who have the same drive as we do. With this new mix of location, entertainment, creative industry and trading focus, we are creating a unique momentum after the pandemic - January is when the big deals are made and the c ourse is set for the future.“

To achieve this goal, the PREMIUM GROUP teams have also given the proven successful formats PREMIUM and SEEK a new coat of paint. More space, new areas and shorter distances provide visitors with a completely new trade event experience. Trends, brands and events can be discovered together with new and well-known partners - for the first time all in one place!

And PREMIUM, which is already entering its 19th year in January, is also showing a new side in Frankfurt. Instead of being spread out like in Station-Berlin, in Frankfurt all brands show their collections in one big hall. „We are so excited to finally unite all exhibitors in one hall. This way we create a universe with many different worlds - colorful and exciting,“ says Wiebus. „We are in close exchange with all the protagonists throughout the year and continue to develop the concepts together. The entire industry is positive about coming together in Frankfurt. Everyone is keen to experience and create something completely new! We offer the framework for this - that is our strength.“

And the Berliners have another surprise in store for the Frankfurt debut: With THE GROUND, they are organizing a large fashion festival for young end consumers for the first time. Responsible for the event concept, in addition to Tillmann, Arntz and the PREMIUM GROUP- team, is B2C expert Kai Zollhöfer, who already made the Bread & Butter by Zalando a crowd puller. “THE GROUND is a B2C festival aimed at a young, purpose-driven generation. This new generation has a strong stance on current social and environmental challenges and expects brands to reflect them. The overriding themes at THE GROUND are therefore sustainability, diversity and equality”, said Zollhöfer.

The 3-day event offers brands the opportunity to interactively exhibit purpose-driven stories and products. In addition to the thematic focus on fashion, brands from the fields of wellbeing, beauty, mobility and technology will also present innovative products and solutions.

Rieter CAMPUS – Foundation Stone Laid (c) Rieter
Rieter Campus Winterthur
09.09.2021

Rieter CAMPUS – Foundation Stone Laid

  • Rieter CAMPUS strengthens innovation strategy and technology leadership position
  • Customer and technology center and administration building ready for occupancy in 2024
  • Commitment to the Winterthur site and to Switzerland as a business location

On September 8, 2021, the foundation stone was laid for the Rieter CAMPUS on the western part of the Rieter site at the Winterthur location, which includes a customer and technology center as well as an administration building. The Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position. At the same time, the investment of around CHF 80 million is a commitment to the Winterthur site and to Switzerland as a business location. 

  • Rieter CAMPUS strengthens innovation strategy and technology leadership position
  • Customer and technology center and administration building ready for occupancy in 2024
  • Commitment to the Winterthur site and to Switzerland as a business location

On September 8, 2021, the foundation stone was laid for the Rieter CAMPUS on the western part of the Rieter site at the Winterthur location, which includes a customer and technology center as well as an administration building. The Rieter CAMPUS will make an important contribution to the implementation of the innovation strategy and to the enhancement of the company’s technology leadership position. At the same time, the investment of around CHF 80 million is a commitment to the Winterthur site and to Switzerland as a business location. 

With a floor area of over 30 000 m2, the Rieter CAMPUS offers space for around   700 ultra-modern workplaces. For this purpose, Rieter and a specialist in office architecture have developed a contemporary space concept for the “Open Space Office” that is tailored to the needs of the company, divided into meeting rooms, focus rooms and some individual offices. The underground car park provides   88 parking spaces, and a further 12 outdoor parking spaces are being created   in front of the technology center.  “In the course of its 225-year company history, Rieter has helped shape the city of Winterthur. The foundation for the future as a leading technology company is now being created with the new CAMPUS. In this way, Rieter is giving a clear indication   of its commitment to the Winterthur site and to Switzerland as a business location”, commented Bernhard Jucker, Chairman of the Board of Directors of Rieter Holding AG.

Innovation is an important part of Rieter’s strategy and crucial for the company’s success. For this reason, Rieter invests more than CHF 50 million annually in research and development. Thanks to this commitment, Rieter is making a   decisive contribution to the further development of systems for sustainable yarn production and their digitization. The Rieter CAMPUS will provide an attractive working environment that promotes creativity and innovation.  The new CAMPUS is a showcase project in terms of economic feasibility, energy efficiency and sustainability. Rieter relies on renewable energy for construction. This includes heat generation via geothermal probes and a photovoltaic system on around 1 300 m2 of roof area. “In this way, the entrepreneurial focus on sustainable and energy-efficient solutions for yarn production is reflected in the overall concept of the CAMPUS,” emphasized Rieter CEO Norbert Klapper.  The move into the new building is planned for 2024.

Source:

Rieter Management AG

07.09.2021

Lenzing AG: Early termination of contract with Stefan Doboczky

  • CEO Stefan Doboczky will not extend contract and will step down at end of third quarter 2021

The Supervisory Board of Lenzing AG, a world’s leading producer of wood-based cellulosic fibers, has come to a mutual agreement with its longstanding Chief Executive Officer Stefan Doboczky to end his contract. Doboczky has informed the Supervisory Board that he will not be available for another extension of his contract. With great regret the Supervisory Board of Lenzing AG accepts his resignation and the parties mutually agreed to end the contract effective September 30, 2021.

  • CEO Stefan Doboczky will not extend contract and will step down at end of third quarter 2021

The Supervisory Board of Lenzing AG, a world’s leading producer of wood-based cellulosic fibers, has come to a mutual agreement with its longstanding Chief Executive Officer Stefan Doboczky to end his contract. Doboczky has informed the Supervisory Board that he will not be available for another extension of his contract. With great regret the Supervisory Board of Lenzing AG accepts his resignation and the parties mutually agreed to end the contract effective September 30, 2021.

“My sincere thanks go to Stefan Doboczky for his exceptional achievements at Lenzing. The design and implementation of the transformation of Lenzing AG into a global specialty fiber leader and the positioning of the company as a recognized sustainability champion have been major accomplishments of Stefan Doboczky over the last years”, said Chairman of the Supervisory Board, Peter Edelmann. “Thanks to his leadership, Lenzing AG finds itself today on a stable and profitable growth track with a clear commitment to become climate-neutral by 2050. And all of that in spite of the challenging environment of the COVID-19 pandemic”, said Edelmann.

Stefan Doboczky: “Developing and consistently implementing the Lenzing strategy has been the cornerstone of my work in recent years. After extensive consideration, I have decided that this is the right time for a personal change. The strategy is in place, the company is well on track – now is the ideal moment to pass on the baton. And one thing is certain: Lenzing will always have a very special place in my heart.”

Lenzing AG remains on track with its guidance for the full year 2021 as announced with the half-year results. Cord Prinzhorn has been appointed interim CEO. Prinzhorn is Member of the Supervisory Board of Lenzing AG and will be available until a successor is found. The Supervisory Board will immediately start the search process.

More information:
Lenzing AG Stefan Doboczky
Source:

Lenzing AG

MUNICH FABRIC START AUTUMN.WINTER 22/23 & BLUEZONE Review (c) Munich Fabric Start Exhibitions GmbH
07.09.2021

MUNICH FABRIC START AUTUMN.WINTER 22/23 & BLUEZONE Review

  • Parade Example for physical Trade Shows

A whole year without physical trade fairs, long months without personal exchange: last week the physical International Textile Trade Show MUNICH FABRIC START and the International Denim Trade Show BLUEZONE took place for the textile industry in Munich. The team at Munich Fabric Start Exhibitions GmbH is bringing a bit of normality back to the industry, but also to event management. Thanks to detailed, Covid-19 compliant fair formats, the organisers show that trade fairs are possible and can be successfully implemented with the appropriate measures.

More than 600 international suppliers presented their new collections and developments for Autumn.Winter 22/23 in around 1000 collections in the Fabrics, Additionals, Design Studios, Sourcing, ReSource and Sustainable Innovations areas at MUNICH FABRIC START as well as denim, sportswear and KEYHOUSE at BLUEZONE.

A winning fusion of BLUEZONE & KEYHOUSE well-attended events

  • Parade Example for physical Trade Shows

A whole year without physical trade fairs, long months without personal exchange: last week the physical International Textile Trade Show MUNICH FABRIC START and the International Denim Trade Show BLUEZONE took place for the textile industry in Munich. The team at Munich Fabric Start Exhibitions GmbH is bringing a bit of normality back to the industry, but also to event management. Thanks to detailed, Covid-19 compliant fair formats, the organisers show that trade fairs are possible and can be successfully implemented with the appropriate measures.

More than 600 international suppliers presented their new collections and developments for Autumn.Winter 22/23 in around 1000 collections in the Fabrics, Additionals, Design Studios, Sourcing, ReSource and Sustainable Innovations areas at MUNICH FABRIC START as well as denim, sportswear and KEYHOUSE at BLUEZONE.

A winning fusion of BLUEZONE & KEYHOUSE well-attended events

Under the motto "BACK TO THE FUTURE", BLUEZONE offered a way back to the tactile experience of textiles and the reunion of the denim community. In addition to international denim weavers and manufacturers, visitors to the Zenith Hall also saw a qualitative selection of KEYHOUSE exhibitors who presented their futuristic innovations for the fashion industry.

Positive visitor & exhibitor echo despite Covid-19 measures

In keeping with the season's title "RISE", the visitors were greeted by inspiring, colourful trend forums with unique highlights for Autumn.Winter 22/23 collection development. In the halls, the industry was able to discover a trade show with the well-known and proven pre-pandemic quality with manufacturers and suppliers presenting in all 8 areas. Non-European suppliers were represented by agencies and offered well-attended show in show concepts.

The newly formed ReSOURCE x SUSTAINABLE INNOVATIONS Area also drew in the crowds. In a modern atmosphere, information was shared on sourcing sustainable textiles and additionals as well as innovative concepts. Another highlight was the launch of FABRIC.iD, the innovative process for the complete digitisation of fabrics to greater serve the industry's digital future.

(c) Autoneum
Claudia Güntert
27.08.2021

Autoneum appoints new Head of Corporate Communications

Claudia Güntert has been appointed Head of Corporate Communications at Autoneum as of November 1, 2021. She succeeds the Corporate Communications Head, Dr. Anahid Rickmann, who will be leaving the company per end of August 2021.

Claudia Güntert studied Jurisprudence at the University of Basel, Switzerland, as well as German and Eastern European Literature at the Universities of Basel and Zurich, Switzerland.

From 2008 to 2013, she was Marketing & Product Communications Manager at Von Roll Management AG in Wädenswil, Switzerland. She thereby gained broad experience in marketing and customer communications in the industry and a deep understanding of the industrial relations between suppliers and their customers. From 2013 until 2021, she was Head of Corporate Communications & Investor Relations at Von Roll Holding AG in Wädenswil and Breitenbach, Switzerland. In this leading position, she expanded her expertise in internal and external communication with a focus on company vision and strategy, branding, global change management, and social media presence. Claudia Güntert will report to Matthias Holzammer, CEO.

Claudia Güntert has been appointed Head of Corporate Communications at Autoneum as of November 1, 2021. She succeeds the Corporate Communications Head, Dr. Anahid Rickmann, who will be leaving the company per end of August 2021.

Claudia Güntert studied Jurisprudence at the University of Basel, Switzerland, as well as German and Eastern European Literature at the Universities of Basel and Zurich, Switzerland.

From 2008 to 2013, she was Marketing & Product Communications Manager at Von Roll Management AG in Wädenswil, Switzerland. She thereby gained broad experience in marketing and customer communications in the industry and a deep understanding of the industrial relations between suppliers and their customers. From 2013 until 2021, she was Head of Corporate Communications & Investor Relations at Von Roll Holding AG in Wädenswil and Breitenbach, Switzerland. In this leading position, she expanded her expertise in internal and external communication with a focus on company vision and strategy, branding, global change management, and social media presence. Claudia Güntert will report to Matthias Holzammer, CEO.

Dr. Anahid Rickmann leaves Autoneum at the end of August at her own request. After almost nine years of service, she has decided to take on a new professional challenge. Anahid Rickmann strategically realigned the Company's communications after it became independent in 2011 and significantly shaped Autoneum's external perception and reputation. Her particular achievements include the measurable success of external communications, brand positioning and the launch of Autoneum's corporate responsibility strategy. CEO Matthias Holzammer and the Board of Directors would like to thank Anahid Rickmann sincerely for her successful, always dedicated and loyal service to Autoneum and wish her the best for her personal and professional future.

For September and October 2021, Luzia Schoeck, Communications Manager, will act as interim Head of Corporate Communications.

More information:
Autoneum Autoneum Management AG
Source:

Autoneum

Jason Kent, BTMA
26.08.2021

New CEO at British Textile Machinery Association (BTMA)

Jason Kent has been appointed as Chief Executive Officer of the BTMA Group, which also includes subsidiaries nw texnet and The Textile Recorder (Machinery & Accessories) Exhibitions Ltd (TREX), effective from Monday 23rd August 2021.

Jason has been a non-executive member of the BTMA board for over eight years and brings a wealth of experience with him, having spent 35 years working in the carpet tufting machinery industry.

As a time-served mechanical technician engineer, he ascended through a series of positions of greater responsibility with Cobble Blackburn until its acquisition in 2013 by the Vandewiele Group, where he undertook the role of Managing Director for the tufting machinery business.

He also studied part-time for his MBA back in 2011 and is also a Chartered Fellow of the Chartered Management Institute.

“I am very privileged to be joining the BTMA,” said Jason Kent. “I believe there are many generational changes ahead that our members must face and the BTMA needs to be ready and capable of supporting such challenges.”

Jason Kent has been appointed as Chief Executive Officer of the BTMA Group, which also includes subsidiaries nw texnet and The Textile Recorder (Machinery & Accessories) Exhibitions Ltd (TREX), effective from Monday 23rd August 2021.

Jason has been a non-executive member of the BTMA board for over eight years and brings a wealth of experience with him, having spent 35 years working in the carpet tufting machinery industry.

As a time-served mechanical technician engineer, he ascended through a series of positions of greater responsibility with Cobble Blackburn until its acquisition in 2013 by the Vandewiele Group, where he undertook the role of Managing Director for the tufting machinery business.

He also studied part-time for his MBA back in 2011 and is also a Chartered Fellow of the Chartered Management Institute.

“I am very privileged to be joining the BTMA,” said Jason Kent. “I believe there are many generational changes ahead that our members must face and the BTMA needs to be ready and capable of supporting such challenges.”

 “As I see it, we have three initial goals in providing better business outcomes for our members through active engagement in addressing industry skills deficits, ensuring we are at the forefront of the industrial digitalisation revolution, and leveraging opportunities brought about through innovation and the associated global focus on sustainability.”
Founded in 1940, the British Textile Machinery Association actively promotes British textile machinery manufacturers and their products to the world. The non-profit organisation acts as a bridge between its members and the increasingly diverse industries within the textile manufacturing sector.

More information:
BTMA
Source:

AWOL Media for BTMA

Thomas Reutter new Vice President Product Asset Management and Supply Chain (c) Borealis
05.08.2021

Borealis: Thomas Reutter new Vice President Product Asset Management and Supply Chain

Borealis announces the appointment of Thomas Reutter as Vice President Product Asset Management and Supply Chain, effective 1 August 2021.
He holds a Master’s in Business Administration degree from the Martin-Luther University Halle, Germany, with a specialisation in Controlling and Supply Chain.

Thomas Reutter joins Borealis from Dow and brings extensive product asset management and supply chain experience. Since joining Dow in 2008, he has held various positions with increasing responsibilities in product management, supply chain management and sales in the Netherlands, Mexico and Switzerland. Most recently he has served as Senior Product Director for Linear Low Density Polyethylene, based in Switzerland.

 

Borealis announces the appointment of Thomas Reutter as Vice President Product Asset Management and Supply Chain, effective 1 August 2021.
He holds a Master’s in Business Administration degree from the Martin-Luther University Halle, Germany, with a specialisation in Controlling and Supply Chain.

Thomas Reutter joins Borealis from Dow and brings extensive product asset management and supply chain experience. Since joining Dow in 2008, he has held various positions with increasing responsibilities in product management, supply chain management and sales in the Netherlands, Mexico and Switzerland. Most recently he has served as Senior Product Director for Linear Low Density Polyethylene, based in Switzerland.

 

More information:
Borealis
Source:

Borealis

(c) Schoeller Textil AG
19.07.2021

Change in leadership at Schoeller Textil AG: Kath succeeds Winkelbeiner

Schoeller Textil AG, the Swiss textile and technology company, announces a shift in leadership as Joachim Kath takes over as CEO. Following a 10-year career at the global textile solutions brand, CEO Siegfried Winkelbeiner is moving into his retirement later this month. Joachim Kath, who comes from the chemical industry, has been working closely with Winkelbeiner as COO at Schoeller for the past year and a half.

Schoeller Textil AG, the Swiss textile and technology company, announces a shift in leadership as Joachim Kath takes over as CEO. Following a 10-year career at the global textile solutions brand, CEO Siegfried Winkelbeiner is moving into his retirement later this month. Joachim Kath, who comes from the chemical industry, has been working closely with Winkelbeiner as COO at Schoeller for the past year and a half.

The transition comes after long-term planning. Since February 2020, and in close partnership with Siegfried Winkelbeiner, Joachim Kath (on the left) has been preparing as Schoeller COO to take over its management. Joachim Kath originally comes from Flensburg (DE) and, following his studies of Chemical Engineering in Karlsruhe, shaped his professional career in the chemical industry with Ciba (-Geigy) / BASF in Basel (CH). His career over 30 years has incorporated engineering, production and marketing & sales in diverse management functions – in a wide range of business segments for various industries and areas of application around the globe. Joachim Kath spent 12 years of his career dedicated to textile finishing, with a period of intensive travel in Asia and a 3-year stay in the USA.

Asked how he sees himself, Joachim Kath said: “The common thread running through all my assignments and business activities is process orientation, interest in new paths, and an instinct for what is feasible – with the goal of achieving customer benefits and satisfaction. Kath aims to ensure that Schoeller can continue to face the challenges of changing market requirements with outstanding and exceptional products, while evolving and innovating to stay ahead of consumer needs for the future. High performance capability, sustainable product development, premium quality, reliability, productivity, and keeping the customer as the central focus of all activities continue as essential keys to Schoeller’s continued business success.

Source:

Schoeller Textil AG

Hudson-Sharp welcomes Jason Beauleau as new Regional Sales Executive (c) Hudson-Sharp / Barry-Wehmiller
Jason Beauleau as new Regional Sales Executive
08.07.2021

Hudson-Sharp welcomes Jason Beauleau as new Regional Sales Executive

Bag-converting equipment manufacturer Hudson-Sharp—part of Paper Converting Machine Company (PCMC) and Barry-Wehmiller’s converting equipment platform—is pleased to announce that Jason Beauleau has joined the company as Regional Sales Executive.

In his new role, Beauleau will be responsible for the Midwest region, as well as for serving multiple key customers. He will be replacing longtime Sales Executive John Krebsbach after he retires on Oct. 1, 2021. Beauleau has more than 25 years of experience in the packaging and printing industry, including 20-plus years with PCMC.

Bag-converting equipment manufacturer Hudson-Sharp—part of Paper Converting Machine Company (PCMC) and Barry-Wehmiller’s converting equipment platform—is pleased to announce that Jason Beauleau has joined the company as Regional Sales Executive.

In his new role, Beauleau will be responsible for the Midwest region, as well as for serving multiple key customers. He will be replacing longtime Sales Executive John Krebsbach after he retires on Oct. 1, 2021. Beauleau has more than 25 years of experience in the packaging and printing industry, including 20-plus years with PCMC.