From the Sector

Reset
13 results
Seite 4 von 5 Schematische Darstellung der von Kelheim und Gebr. Otto entwickelten Periodenunterwäsche. Grafik Kelheim Fibres
Seite 4 von 5 Schematische Darstellung der von Kelheim und Gebr. Otto entwickelten Periodenunterwäsche.
27.03.2024

Techtextil: Kelheim Fibres und Gebr. Otto präsentieren nachhaltige Periodenunterwäsche

Zur Techtextil, die Ende April 2024 in Frankfurt stattfindet, werden die Unternehmen Kelheim Fibres und Gebr. Otto ihr gemeinsames Konzept präsentieren, das Periodenunterwäsche nachhaltiger und leistungsfähiger macht. Auf dem BW-i-Gemeinschaftsstand bzw. auf dem Gemeinschaftsstand des IVGT zeigen die Innovationspartner ihre Lösung einer Periodenunterwäsche aus biobasierten Materialien, die sich durch Performancewerte hervorsticht. Die verschiedenen Viskosespezialfasern, die dabei zum Einsatz kommen, stammen von Kelheim. In der jeweils passenden Zusammensetzung verspinnt sie Gebr. Otto.

Zur Techtextil, die Ende April 2024 in Frankfurt stattfindet, werden die Unternehmen Kelheim Fibres und Gebr. Otto ihr gemeinsames Konzept präsentieren, das Periodenunterwäsche nachhaltiger und leistungsfähiger macht. Auf dem BW-i-Gemeinschaftsstand bzw. auf dem Gemeinschaftsstand des IVGT zeigen die Innovationspartner ihre Lösung einer Periodenunterwäsche aus biobasierten Materialien, die sich durch Performancewerte hervorsticht. Die verschiedenen Viskosespezialfasern, die dabei zum Einsatz kommen, stammen von Kelheim. In der jeweils passenden Zusammensetzung verspinnt sie Gebr. Otto.

Rund 15.000 Produkte zur Monatshygiene verbraucht eine Frau durchschnittlich in ihrem Leben. Dabei handelt es sich hauptsächlich um Einwegprodukte, durch die viele Tonnen Müll entstehen, und deren Plastikkomponenten bis zu 500 Jahre brauchen, bis sie – nachdem sie in immer kleinere und kleinste Teile zerfallen sind - abgebaut sind. Produkte zur weiblichen Monatshygiene, Einweg- wie Mehrwegprodukte, nachhaltiger zu gestalten, ist seit einigen Jahren Trend. In diese Kategorie gehören nicht nur biologisch abbaubare Einwegprodukte, sondern auch waschbare Periodenslips, die etablierte Wäschehersteller ebenso wie Start-ups anbieten.

Die Periodenunterwäsche ist aus mehreren Lagen mit unterschiedlichen Funktionen aufgebaut –das Topsheet muss Flüssigkeit schnell aufnehmen und vom Körper wegleiten, die anschließende Verteilerschicht (Acquisition-Distribution-Layer, ADL) sorgt für eine zügige und ideale Verteilung der Flüssigkeit im Saugkörper. Dieser schließt die Flüssigkeit ein und hält sie in seinem Inneren fest und verhindert so ein mögliches Rücknässen. Das Ergebnis ist ein Prototyp, der bei Schnelligkeit und Kapazität der Flüssigkeitsaufnahme sowie Rücknässung deutlich bessere Werte erzielt als handelsübliche Lösungen.

Source:

Kelheim Fibres

Composites production volume in Europe since 2011 (in kt) Graphik AVK – Industrievereinigung Verstärkte Kunststoffe e. V.
Composites production volume in Europe since 2011 (in kt)
06.03.2024

European composites market on the level of 2014

After a long phase of continuous growth, the composites market has seen strong fluctuations since 2018. In 2023, the overall market for composites in Europe fell by 8%.

The current mood on the markets in Germany and Europe is rather negative within the industry. The main drivers are the persistently high energy and raw material prices. Added to this are problems in logistics chains and a cautious consumer climate. A slowdown in global trade and uncertainties in the political arena are fueling the negative sentiment. Despite rising registration figures, the automotive industry, the most important application area for composites, has not yet returned to its pre-2020 volume. The construction industry, the second key application area, is currently in crisis. These factors have already caused the Eu-ropean composites production volume to fall significantly in recent years. There has now been another decline in Europe for 2023.

After a long phase of continuous growth, the composites market has seen strong fluctuations since 2018. In 2023, the overall market for composites in Europe fell by 8%.

The current mood on the markets in Germany and Europe is rather negative within the industry. The main drivers are the persistently high energy and raw material prices. Added to this are problems in logistics chains and a cautious consumer climate. A slowdown in global trade and uncertainties in the political arena are fueling the negative sentiment. Despite rising registration figures, the automotive industry, the most important application area for composites, has not yet returned to its pre-2020 volume. The construction industry, the second key application area, is currently in crisis. These factors have already caused the Eu-ropean composites production volume to fall significantly in recent years. There has now been another decline in Europe for 2023.

Overall development of the composites market
The volume of the global composites market totalled 13 million tons in 2023. Compared to 2022, with a volume of 12.3 million tons, growth was around 5%. In comparison, the European composites production volume fell by 8% in 2023. The total European composites market thus comprises a volume of 2,559 kilotons (kt) after 2,781 kt in 2022.

The market is therefore declining and falling back to the level of 2014. Overall, market momentum in Europe was lower than in the global market. Europe's share of the global market is now around 20%.

As in previous years, development within Europe is not uniform. The differences are due to very different regional core markets, the high variability of the materi-als used, a wide range of different manufacturing processes and widely differing areas of application. Accordingly, there are different regional trends, especially with regard to the individual processes, although there were declines in all re-gions and for almost all processes in 2023. At almost 50% of the market volume, the transportation sector accounts for the largest share of total composites pro-duction in terms of volume. The next two largest areas are the electri-cal/electronics sector and applications in construction and infrastructure.

The entire market report 2023 is available for download: https://www.avk-tv.de/publications.php.

nominees Graphic: nova Institut
19.01.2024

Nominated Innovations for Cellulose Fibre Innovation of the Year 2024 Award

From Resource-efficient and Recycled Fibres for Textiles and Building Panels to Geotextiles for Glacier Protection: Six award nominees present innovative and sustainable solutions for various industries in the cellulose fibre value chain. The full economic potential of the cellulose fibre industry will be introduced to a wide audience that will vote for the winners in Cologne (Germany), and online.

Again nova-Institute grants the “Cellulose Fibre Innovation of the Year” award in the context of the “Cellulose Fibres Conference”, that will take place in Cologne on 13 and 14 March 2024. In advance, the conferences advisory board nominated six remarkable products, including cellulose fibres from textile waste and straw, a novel technology for dying cellulose-based textiles and a construction panel as well as geotextiles. The innovations will be presented by the companies on the first day of the event. All conference participants can vote for one of the six nominees and the top three winners will be honoured with the “Cellulose Fibre Innovation of the Year” award. The Innovation award is sponsored by GIG Karasek (AT).

From Resource-efficient and Recycled Fibres for Textiles and Building Panels to Geotextiles for Glacier Protection: Six award nominees present innovative and sustainable solutions for various industries in the cellulose fibre value chain. The full economic potential of the cellulose fibre industry will be introduced to a wide audience that will vote for the winners in Cologne (Germany), and online.

Again nova-Institute grants the “Cellulose Fibre Innovation of the Year” award in the context of the “Cellulose Fibres Conference”, that will take place in Cologne on 13 and 14 March 2024. In advance, the conferences advisory board nominated six remarkable products, including cellulose fibres from textile waste and straw, a novel technology for dying cellulose-based textiles and a construction panel as well as geotextiles. The innovations will be presented by the companies on the first day of the event. All conference participants can vote for one of the six nominees and the top three winners will be honoured with the “Cellulose Fibre Innovation of the Year” award. The Innovation award is sponsored by GIG Karasek (AT).

In addition, the ever-growing sectors of cellulose-based nonwovens, packaging and hygiene products offer conference participants insights beyond the horizon of traditional textile applications. Sustainability and other topics such as fibre-to-fibre recycling and alternative fibre sources are the key topics of the Cellulose Fibres Conference, held in Cologne, Germany, on 13 and 14 March 2024 and online. The conference will showcase the most successful cellulose-based solutions currently on the market or those planned for the near future.

The nominees:

The Straw Flexi-Dress: Design Meets Sustainability – DITF & VRETENA (DE)
The Flexi-Dress design was inspired by the natural golden colour and silky touch of HighPerCell® (HPC) filaments based on unbleached straw pulp. These cellulose filaments are produced using environmentally friendly spinning technology in a closed-loop production process. The design decisions focused on the emotional connection and attachment to the HPC material to create a local and circular fashion product. The Flexi-Dress is designed as a versatile knitted garment – from work to street – that can be worn as a dress, but can also be split into two pieces – used separately as a top and a straight skirt. The top can also be worn with the V-neck front or back. The HPC textile knit structure was considered important for comfort and emotional properties.

HONEXT® Board FR-B (B-s1, d0) – Flame-retardant Board made From Upcycled Fibre Waste From the Paper Industry – Honext Material (ES)
HONEXT® FR-B board (B-s1, d0) is a flame-retardant board made from 100 % upcycled industrial waste fibres from the paper industry. Thanks to innovations in biotechnology, paper sludge is upcycled – the previously “worthless” residue from paper making – to create a fully recyclable material, all without the use of resins. This lightweight and easy-to-handle board boasts high mechanical performance and stability, along with low thermal conductivity, making it perfect for various applications in all interior environments where fire safety is a priority. The material is non-toxic, with no added VOCs, ensuring safety for both people and the planet. A sustainable and healthy material for the built environment, it achieves Cradle-to-Cradle Certified GOLD, and Material Health CertificateTM Gold Level version 4.0 with a carbon-negative footprint. Additionally, it is verified in the Product Environmental Footprint.

LENZING™ Cellulosic Fibres for Glacier Protection – Lenzing (AT)
Glaciers are now facing an unprecedented threat from global warming. Synthetic fibre-based geotextiles, while effective in slowing down glacier melt, create a new environmental challenge: microplastics contaminating glacial environments. The use of such materials contradicts the very purpose of glacier protection, as it exacerbates an already critical environmental problem. Recognizing this problem, the innovative use of cellulosic LENZING™ fibres presents a pioneering solution. The Institute of Ecology, at the University of Innsbruck, together with Lenzing and other partners made first trials in 2022 by covering small test fields with LENZING™ fibre-based geotextiles. The results were promising, confirming the effectiveness of this approach in slowing glacier melt without leaving behind microplastic.

The RENU Jacket – Advanced Recycling for Cellulosic Textiles – Pangaia (UK) & Evrnu (US)
PANGAIA LAB was born out of a dream to reduce barriers between people and the breakthrough innovations in material science. In 2023, PANGAIA LAB launched the RENU Jacket, a limited edition product made from 100% Nucycl® – a technology that recycles cellulosic textiles by breaking them down to their molecular building blocks, and reforming them into new fibres. This process produces a result that is 100% recycled and 100% recyclable when returned to the correct waste stream – maintaining the strength of the fibre so it doesn’t need to be blended with virgin material.
Through collaboration with Evrnu, the PANGAIA team created the world’s first 100% chemically recycled denim jacket, replacing a material traditionally made from 100% virgin cotton. By incorporating Nucycl® into this iconic fabric construction, dyed with natural indigo, the teams have demonstrated that it’s possible to replace ubiquitous materials with this innovation.

Textiles Made from Easy-to-dye Biocelsol – VTT Technical Research Centre of Finland (FI)
One third of the textile industry’s wastewater is generated in dyeing and one fifth in finishing. But the use of chemically modified Biocelsol fibres reduces waste water. The knitted fabric is made from viscose and Biocelsol fibres and is only dyed after knitting. This gives the Biocelsol fibres a darker shade, using the same amount of dye and no salt in dyeing process. In addition, an interesting visual effect can be achieved. Moreover, less dye is needed for the darker colour tone in the finished textile and the possibility to use the salt-free dyeing is more environmentally friendly.
These special properties of man-made cellulosic fibres will reassert the fibres as a replacement for the existing fossil-based fibres, thus filling the demand for more environmentally friendly dyeing-solutions in the textile industry. The functionalised Biocelsol fibres were made in Finnish Academy FinnCERES project and are produced by wet spinning technique from the cellulose dope containing low amounts of 3-allyloxy-2-hydroxypropyl substituents. The functionality formed is permanent and has been shown to significantly improve the dyeability of the fibres. In addition, the functionalisation of Biocelsol fibres reduces the cost of textile finishing and dyeing as well as the effluent load.

A New Generation of Bio-based and Resource-efficient Fibre – TreeToTextile (SE)
TreeToTextile has developed a unique, sustainable and resource efficient fibre that doesn't exist on the market today. It has a natural dry feel similar to cotton and a semi-dull sheen and high drape like viscose. It is based on cellulose and has the potential to complement or replace cotton, viscose and polyester as a single fibre or in blends, depending on the application.
TreeToTextile Technology™ has a low demand for chemicals, energy and water. According to a third party verified LCA, the TreeToTextile fibre has a climate impact of 0.6 kg CO2 eq/kilo fibre. The fibre is made from bio-based and traceable resources and is biodegradable.

More information:
Nova Institut nova Institute
Source:

nova Institut

ElasTool in a lifting unit, e.g. for logistics, transport or mining Grafik JUMBO-Textil
ElasTool in a lifting unit, e.g. for logistics, transport or mining
22.08.2023

JUMBO-Textil: Lubricant-free tensioning and clamping system

From mechanical engineering to the construction industry, from logistics to rescue technology – tensioning and clamping systems fulfil important tasks in a number of industries. The possible uses of technical textiles for industrial applications of this kind are manifold.

Patented and precisely configured
The ElasTool system from the elastics expert consists of a connection tool and a rubber rope connected to this tool via integrated locking elements. The stainless steel, aluminium or plastic connection tool and the rubber rope – with a thickness of between 12 and 38 mm – are each configured to fit precisely. The highlight of the patented connection solution: the more tensile force is exerted, the more the rope is jammed. Thanks to the locking system, ElasTool still provides a secure hold even when the diameter of the rubber rope narrows to up to 60 percent due to the tensile load. A crucial advantage over conventional end connections by pressing.

From mechanical engineering to the construction industry, from logistics to rescue technology – tensioning and clamping systems fulfil important tasks in a number of industries. The possible uses of technical textiles for industrial applications of this kind are manifold.

Patented and precisely configured
The ElasTool system from the elastics expert consists of a connection tool and a rubber rope connected to this tool via integrated locking elements. The stainless steel, aluminium or plastic connection tool and the rubber rope – with a thickness of between 12 and 38 mm – are each configured to fit precisely. The highlight of the patented connection solution: the more tensile force is exerted, the more the rope is jammed. Thanks to the locking system, ElasTool still provides a secure hold even when the diameter of the rubber rope narrows to up to 60 percent due to the tensile load. A crucial advantage over conventional end connections by pressing.

Economical and low maintenance
The system has further advantages: the textile solution runs quietly. Unlike clamping systems with steel cable springs, there is no creaking here. In addition, textiles, plastic and aluminium are particularly lightweight materials. ElasTool therefore saves energy. Another benefit: the connection system works without lubricating oil. While conventional tensioning and clamping solutions in industrial plants and products have to be oiled regularly, the JUMBO textile system works completely maintenance-free.

Versatile and easily interchangeable
Depending on the area of application of the ElasTool, the interchangeable head can be exchanged: Plastic hook instead of aluminium eyelet, stainless steel flange instead of aluminium hook – for example. The interchangeable head can be replaced effortlessly and without special tools.

"A lifting system in a high-bay warehouse, a trolley in a crane, damping for compressors or crash systems – these are just three of the many possible applications. We adapt the dimensions, material, force-stretch behaviour, flame retardancy – like all properties – specifically to the respective project," emphasises Carl Mrusek, Chief Sales Officer of JUMBO-Textil. "Thus, with ElasTool, we offer a safe load connection for a wide variety of applications in industry."

ElasTool from JUMBO-Textil

  • Lightweight and flexible alternative to conventional tensioning and clamping systems
  • Suitable even in small installation spaces
  • With individual specifications and infinitely customisable dimensions
  • Connection tool optionally made of plastic, aluminium or stainless steel
  • Rubber rope in a thickness of 12 to 38 mm
  • Rubber rope made of polyamide, polyester, recycled PES, polypropylene, aramid, Dyneema, monofilament, natural fibres
  • Different interchangeable head shapes possible
  • As an end connection or for coupling with other machine elements
  • Tensile load up to 600 N, in individual cases more than this
  • Individually configurable e.g. with hook, eyelet or flange
Source:

JUMBO-Textil

Graphik Freudenberg Performance Materials
10.01.2023

Freudenberg: Technical packaging textiles with less CO2 emissions

By using a high share of recycled content in its Evolon® materials, Freudenberg Performance Materials (Freudenberg) offers technical packaging textiles with a carbon footprint decreased by 35%. An independent LCA study showed additional benefits such as energy resource savings and lower water use. Furthermore, Evolon® fabrics provide sustainability benefits over the packaging entire life cycle thanks to high end performance and durability.

By replacing virgin PET with recycled PET, the cradle-to-gate carbon footprint of Evolon® packaging textile materials decreased by 35%. This is the result of a study by an independent LCA and eco-design consultancy firm, which made a Cradle-to-Gate assessment of several Evolon® products using virgin PET or recycled PET. The study was finalized in 2022 and conducted according to the principles of ISO 14040/ ISO 14044 standards, following the recommendations of the Product Environmental Footprint and the Circular Footprint Formula.

By using a high share of recycled content in its Evolon® materials, Freudenberg Performance Materials (Freudenberg) offers technical packaging textiles with a carbon footprint decreased by 35%. An independent LCA study showed additional benefits such as energy resource savings and lower water use. Furthermore, Evolon® fabrics provide sustainability benefits over the packaging entire life cycle thanks to high end performance and durability.

By replacing virgin PET with recycled PET, the cradle-to-gate carbon footprint of Evolon® packaging textile materials decreased by 35%. This is the result of a study by an independent LCA and eco-design consultancy firm, which made a Cradle-to-Gate assessment of several Evolon® products using virgin PET or recycled PET. The study was finalized in 2022 and conducted according to the principles of ISO 14040/ ISO 14044 standards, following the recommendations of the Product Environmental Footprint and the Circular Footprint Formula.

Evolon® microfilament textiles have a small carbon footprint because their manufacturing process uses low CO2 energy sources. The fabrics are lightweight and can be reused throughout entire production programs, e.g. of a car model when it is about the automotive industry. Furthermore, the new Evolon® RE fabrics contain up to 85% of recycled PET which is produced in-house out of post-consumer PET bottles.

Evolon® textiles are suitable for reusable technical packaging, which eliminate the use of thousands of disposable packaging materials. Evolon® fabrics offer scratch-free, lint-free, high-end surface protection for molded plastic parts, painted parts and other sensitive industrial and automotive parts during transport. This contributes to lower the scrap rate of parts and provide both financial and ecological benefits. By using Evolon® reusable packaging to transport highly-sensitive parts, customers can increase their efficiency and save resources.

Source:

Freudenberg Performance Materials

Grafik BVMed
08.12.2022

Bevölkerungsumfrage: Nur 10 Prozent der Deutschen wechseln Masken nach jedem Gebrauch

BVMed: „Masken müssen korrekt angewendet werden“

Nur 10 Prozent der Deutschen wechseln ihre FFP2-Maske nach jedem Gebrauch. 9 Prozent der Bevölkerung wechseln die Maske so selten wie möglich, über 18 Prozent tragen überhaupt keine Maske. Das ergab eine repräsentative Befragung des Meinungsforschungsunternehmens Civey im Auftrag des Bundesverbandes Medizintechnologie (BVMed). 2.500 Personen wurden zwischen dem 28. und 29. November 2022 befragt. Die Ergebnisse sind repräsentativ für die Einwohner Deutschlands ab 18 Jahren. Der statistische Fehler der Gesamtergebnisse liegt bei 3,3 Prozent.

„Medizinische Masken schützen bei richtiger Anwendung sehr gut vor Infektionen. Wichtig ist, die Hinweise der Profis zum richtigen Umgang mit Masken und die Hygieneregeln zu beachten“, kommentiert BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

BVMed: „Masken müssen korrekt angewendet werden“

Nur 10 Prozent der Deutschen wechseln ihre FFP2-Maske nach jedem Gebrauch. 9 Prozent der Bevölkerung wechseln die Maske so selten wie möglich, über 18 Prozent tragen überhaupt keine Maske. Das ergab eine repräsentative Befragung des Meinungsforschungsunternehmens Civey im Auftrag des Bundesverbandes Medizintechnologie (BVMed). 2.500 Personen wurden zwischen dem 28. und 29. November 2022 befragt. Die Ergebnisse sind repräsentativ für die Einwohner Deutschlands ab 18 Jahren. Der statistische Fehler der Gesamtergebnisse liegt bei 3,3 Prozent.

„Medizinische Masken schützen bei richtiger Anwendung sehr gut vor Infektionen. Wichtig ist, die Hinweise der Profis zum richtigen Umgang mit Masken und die Hygieneregeln zu beachten“, kommentiert BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll.

In Teilen des öffentlichen Raumes gilt weiterhin die Pflicht zum Tragen einer medizinischen bzw. einer FFP2-Maske. Nach der BVMed-Umfrage sind die häufigsten Wechselgründe: Wenn die Maske verschmutzt ist (50,8 Prozent), kaputt gegangen ist (41,3 Prozent), schlecht riecht bzw. unhygienisch ist (37,0 Prozent) oder wenn die Maske durchfeuchtet ist (35,6 Prozent).

Unterschieden werden OP-Masken bzw. medizinische Masken (Mund-Nasen-Schutz) und Atemschutzmasken.

  • OP-Masken dienen vor allem dem Schutz der Umgebung vor Keimen, die Träger:innen beispielsweise durch Atmen oder Niesen verteilen könnte.
  • Atemschutzmasken hingegen dienen dem Schutz der Träger:innen vor Viren. Bei den Atemschutzmasken gibt es wiederum verschiedene Gruppen. Zum Schutz vor Viren und Mikroorganismen sind grundsätzlich Masken mit einem Partikelfilter geeignet. Dazu zählen unter anderem sogenannte Partikelfiltrierende Halbmasken, besser bekannt als FFP-Masken.

Genutzt werden von den Menschen aktuell vor allem FFP2-Masken. Sie sind nur dann wirksam, wenn sie korrekt angelegt werden.

  • Vor dem Aufsetzen der Maske sollten die Hände gründlich mit Wasser und Seife oder einem geeigneten Desinfektionsmittel gereinigt werden.
  • Die Maske muss gemäß der ihr beiliegenden Anleitung aufgesetzt werden. Sie muss Mund und Nase vollständig abdecken.
  • Es muss sichergestellt sein, dass keine Lücken zwischen Gesicht und Maske vorhanden sind.
  • FFP2-Masken sollten grundsätzlich nicht mehrfach verwendet werden, da es sich i.d.R. um Einmalprodukte handelt.
More information:
BVMed FFP-2 Masken Einwegmasken
Source:

BVMed | Bundesverband Medizintechnologie e.V.

31.10.2022

Cinte Techtextil China announces exhibitors for December Edition

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

  • TESTEX, an international, independent Swiss institute which specialises in the testing and certification of textile and leather products. The organisation is a founding member and official representative of the OEKO-TEX® Association, and will present their certification services at the fairground.
  • Cotton Council International (CCI) is a non-profit trade association that promotes US cotton fibre and manufactured cotton products, with their COTTON USA™ Mark. At this year’s fair they will showcase cotton spunlace fabric, wipes, kitchen tissues, facial masks, cosmetic removers, and more, with their products particularly applicable to Agrotech, Clothtech, Medtech, and Sporttech.
  • Graf + Cie AG is a subsidiary of the Rieter Group, and a leading supplier of clothing for carding and combs for combing machines in the short- and long-staple spinning industry. This year, the Swiss company will showcase stationary flats, and metallic card clothing for roller cards.
  • At the returning German Pavilion, buyers can source sought-after technical textiles and nonwovens that are renowned for their quality. The companies and expertise on display at this pavilion are endorsed by the Federal Republic of Germany, with several exhibitors highlighted below:
  • Brückner Textile Technologies GmbH & Co KG has developed machinery for the textile industry since 1949. Today, the company offers complete line systems for the dry finishing of both woven and knitted fabric, as well as for technical textiles, glass fibres, and floor coverings.
  • Perlon (Zhejiang) Co Ltd is part of a global group of companies that specialises in the manufacture of synthetic filaments, with factories in China, Germany, Poland, and the US. Their products have a diverse range of potential uses, largely categorised in the Agrotech and Indutech application areas.
  • IBENA Textilwerke GmbH produces various functional fabrics for Protech. At the fair, the company will be showcasing insulative, flame retardant (FR) textiles for firefighting and search & rescue services. Developed with DuPont™ aramid material, their FR properties will not diminish after washing or repeated use.

This year’s fair also sees the return of the Taiwan Zone. With support from the Taiwan Nonwoven Fabrics Industry Association, the area will showcase a range of industry leading nonwoven products and services, by brands such as KNH Enterprise, Nan Liu Enterprise, Unique Pretty Ind, and Web-Pro Corporation.

As a world’s largest manufacturer of technical textiles, China is home to a vast array of companies responsible for innovative products. Some domestic exhibitors to look out for are:

  • CTA Hi-Textiles Co Ltd, a high-tech enterprise controlled by China Textile Science Research Institute. In recent years, the company has developed several new textile composite materials, and their products are widely used in sectors such as national defence, policing and public security, medical protection, and engineering and manufacturing.
  • Sateri is one of the world’s largest producers of viscose fibre, with an annual capacity of 1.8 million metric tonnes. At their mills, they make yarn and fibre products applicable to sectors such as beauty, hygiene and personal care, medical, wipes, and protective wear.

To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations. Further information on Match Plus will be available at a later stage.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

(c) Weissengruber Fotografie für Röfix
30.06.2022

Erstmals in Österreich: Einsatz von Textilbeton für statische Betoninstandsetzung

  • Röfix nutzt Produktinnovation für Brückensanierung im Bregenzerwald

In einem Pilotprojekt zur Verstärkung der Betonkonstruktion einer Brücke im Bregenzerwald wird erstmals in Österreich Textilbeton eingesetzt. Durch die Forschungs-und Entwicklungsarbeit der Universität Innsbruck mit dem Vorarlberger Baustoffhersteller Röfix und der Firma Texible aus Dornbirn wurde das Produkt „Textilbeton“ zur Marktreife gebracht. Textilbeton trägt wesentlich zur Materialreduktion bei und ist dadurch nachhaltiger als herkömmliche Lösungen.

Im Mai 2022 startete die umfangreiche Instandsetzung der Krumbachbrücke im Bregenzerwald. Röfix liefert für das Sanierungsprojekt rund 100 Tonnen Nassspritzreparaturmörtel und die Firma Texible ca. 6.600 m2 gesticktes Textilgewebe. Erstmals in Österreich kommt dabei Textilbeton als Betoninstandsetzung zum Einsatz. Mitte Mai wurden auf der Baustelle zwei Versuchsfelder mit dem neuen Verfahren durchgeführt, die nach ca. 28 Tagen von der Universität Innsbruck umfangreich geprüft wurden.

  • Röfix nutzt Produktinnovation für Brückensanierung im Bregenzerwald

In einem Pilotprojekt zur Verstärkung der Betonkonstruktion einer Brücke im Bregenzerwald wird erstmals in Österreich Textilbeton eingesetzt. Durch die Forschungs-und Entwicklungsarbeit der Universität Innsbruck mit dem Vorarlberger Baustoffhersteller Röfix und der Firma Texible aus Dornbirn wurde das Produkt „Textilbeton“ zur Marktreife gebracht. Textilbeton trägt wesentlich zur Materialreduktion bei und ist dadurch nachhaltiger als herkömmliche Lösungen.

Im Mai 2022 startete die umfangreiche Instandsetzung der Krumbachbrücke im Bregenzerwald. Röfix liefert für das Sanierungsprojekt rund 100 Tonnen Nassspritzreparaturmörtel und die Firma Texible ca. 6.600 m2 gesticktes Textilgewebe. Erstmals in Österreich kommt dabei Textilbeton als Betoninstandsetzung zum Einsatz. Mitte Mai wurden auf der Baustelle zwei Versuchsfelder mit dem neuen Verfahren durchgeführt, die nach ca. 28 Tagen von der Universität Innsbruck umfangreich geprüft wurden.

Textilbeton ist ein künstlicher Verbundwerkstoff, der aus zwei Komponenten, Beton bzw. Mörtel und einer textilen Bewehrung, besteht. Das Textilgewebe aus Kohlestofffasern (Carbon) wird anschließend zu gitterartigen Matten verarbeitet. Bei der Anwendung wird zunächst der schadhafte Beton mittels Hochdruckwasserstrahlen von den zu sanierenden Betonflächen entfernt. Danach wird die Textilbewehrung mit einem Nassspritzmörtel maschinell eingespritzt und die Betonoberfläche glatt abgezogen. Ein Vorteil beim Einsatz von Textilbeton ist, dass nur eine relativ dünne Betonschicht notwendig ist und die Brücke weniger zusätzliches Gewicht tragen muss als bei einer üblichen Ausführung. Mit nur etwa 3 cm Textilbeton können fast die gleichen Festigkeitswerte erreicht werden wie bei 10 bis 12 cm herkömmlich bewehrtem Beton. Da deutlich weniger Material erforderlich ist, lassen sich Transportkosten und CO2-Emissionen vermeiden. Beim Einsatz von Textilgewebe findet zudem im Gegensatz zu Stahl keine Bewehrungskorrosion statt. Für die Instandsetzung der Brücke werden bis Ende 2023 ca. 100 Tonnen Mörtel und 6.600 m2 Textilgewebe eingesetzt werden.

More information:
Textilbeton Röfix Texible
Source:

Röfix AG

Grafik: STFI
22.03.2022

STFI startet Akademie

Mit der STFI Akademie startet das Sächsische Textilforschungsinstitut e.V (STFI) ab April 2022 den hauseigenen Bereich Fachkräftequalifizierung in drei Modulen. Das Modul Weiterbildung | Qualifizierung bietet Kurse für die Mitarbeiterqualifikation an. Die ersten Kurse finden Anfang April statt. Die Verbundausbildung währenddessen unterstützt Ausbildungsbetriebe und ihre Auszubildenden. Unter Textil-Info bündelt das STFI Angebote für Schüler, wie das beliebte Rucksack-Projekt und die Doppelstunde „Textile Welt“, die an die Schulen kommt.

Die Verbundausbildung unterstützt Ausbildungsbetriebe und ihre Auszubildenden. Die Auszubildenden erhalten einen breiten Einblick in die Textilbranche. Die fachbezogenen Module können wichtige Ausbildungsschwerpunkte ergänzen oder vertiefen, sofern es den Unternehmen aufgrund ihrer Spezialisierung selbst nicht möglich ist. Alle Module offeriert das STFI als Basisprogramm, Intensivprogramm oder individuell, zeitlich und inhaltlich nach Kundenwunsch ausgerichtet.

Mit der STFI Akademie startet das Sächsische Textilforschungsinstitut e.V (STFI) ab April 2022 den hauseigenen Bereich Fachkräftequalifizierung in drei Modulen. Das Modul Weiterbildung | Qualifizierung bietet Kurse für die Mitarbeiterqualifikation an. Die ersten Kurse finden Anfang April statt. Die Verbundausbildung währenddessen unterstützt Ausbildungsbetriebe und ihre Auszubildenden. Unter Textil-Info bündelt das STFI Angebote für Schüler, wie das beliebte Rucksack-Projekt und die Doppelstunde „Textile Welt“, die an die Schulen kommt.

Die Verbundausbildung unterstützt Ausbildungsbetriebe und ihre Auszubildenden. Die Auszubildenden erhalten einen breiten Einblick in die Textilbranche. Die fachbezogenen Module können wichtige Ausbildungsschwerpunkte ergänzen oder vertiefen, sofern es den Unternehmen aufgrund ihrer Spezialisierung selbst nicht möglich ist. Alle Module offeriert das STFI als Basisprogramm, Intensivprogramm oder individuell, zeitlich und inhaltlich nach Kundenwunsch ausgerichtet.

Im Akademiebaustein Qualifizierung oder Weiterbildung bietet das STFI umfangreiche Kurse zur Mitarbeiterqualifikation an. Gerade wenn Unternehmen spezialisiert sind, kann es von Interesse sein, andere textile Teilgebiete theoretisch oder praktisch kennen gelernt und erfahren zu haben. Die Kurse werden je nach Umfang und Inhalt als Grundlagen- oder Intensivkurse durchgeführt. Die Kursteilnehmer erhalten umfangreiches Schulungs- und Informationsmaterial. Die theoretischen Ausführungen finden in modern ausgestatteten Beratungsräumen statt und werden direkt an den Anlagen oder in den Labors mit praktischen Übungen und Vorführungen untersetzt.

Im Akademiebaustein Textil-Info möchten die Kollegen des STFI Schüler für Textil begeistern. Dafür stehen zwei Projekte zur Verfügung. Zum Beispiel stellen Mitarbeiter des STFI in einer Doppelstunde die „Textile Welt“, die Ausbildungsberufe Textillaborant, Produktionsmechaniker Textil, Produktveredler und Chemielaborant sowie Aufstiegs- und Qualifizierungsmöglichkeiten vor. Dieses Angebot richtet sich insbesondere an Schulen mit den Abschlussjahrgängen 9. und 10. Klasse. Im Rucksackprojekt erleben junge Teilnehmer eindrucksvoll, wie aus einfachen Fäden ihr individueller Rucksack entsteht. Dieses Projekt vermittelt einen breiten Überblick über die textile Welt. Dieses Angebot richtet sich an Schüler und Gruppen von Berufsschullehrern, Mitarbeiter von Textilunternehmen oder Interessierte. Das Projekt eignet sich darüber hinaus als Teambuilding-Maßnahme oder als betriebliches Event-Angebot.

Grafik VDI Zentrum Ressourceneffizienz
25.02.2022

VDI: Ressourcen-sparende Herstellung von Industrietextilien

Industrietextilien müssen in der Nutzung hohen Anforderungen gerecht werden, was eine komplexe und oft auch ressourcenintensive Herstellung bedeutet. Wie sich in diesem Prozess Material und Energie sparen lassen, zeigt die Prozesskette „Industrietextilien“ des VDI Zentrums Ressourceneffizienz (VDI ZRE) anhand von Beispielen und aktuellen Forschungsvorhaben.

Die Anforderungen an Industrietextilien sind deutlich höher und vielfältiger als an solche Textilien, die im Alltag verwendet werden. Im industriellen Kontext eingesetzte Filterstoffe, Verpackungsmaterialien oder Beschichtungsträger werden meist aus hochspezialisierten Chemiefasern und unter hohem Einsatz von Energie und Wasser hergestellt. Oft besteht ein großes Einsparpotenzial.

Industrietextilien müssen in der Nutzung hohen Anforderungen gerecht werden, was eine komplexe und oft auch ressourcenintensive Herstellung bedeutet. Wie sich in diesem Prozess Material und Energie sparen lassen, zeigt die Prozesskette „Industrietextilien“ des VDI Zentrums Ressourceneffizienz (VDI ZRE) anhand von Beispielen und aktuellen Forschungsvorhaben.

Die Anforderungen an Industrietextilien sind deutlich höher und vielfältiger als an solche Textilien, die im Alltag verwendet werden. Im industriellen Kontext eingesetzte Filterstoffe, Verpackungsmaterialien oder Beschichtungsträger werden meist aus hochspezialisierten Chemiefasern und unter hohem Einsatz von Energie und Wasser hergestellt. Oft besteht ein großes Einsparpotenzial.

Unternehmen bilden in der Regel nicht den kompletten Herstellungsprozess von der Faserherstellung bis zum fertigen textilen Produkt ab. Vielmehr spezialisieren sich die Unternehmen zunehmend auf einzelne Aktivitäten entlang der textilen Kette. Die Online-Prozesskette des VDI ZRE veranschaulicht den gesamten Herstellungsprozess und gibt gezielt Einblicke in die Einzelschritte. Beispiele verdeutlichen, welche Einsparungen andere Unternehmen bereits in einem ähnlichen Umfeld erreicht haben. Forschungsvorhaben zeigen, auf welche zukünftigen technischen Entwicklungen sich die Unternehmen einstellen sollten, um diese für ihre eigenen Innovationen nutzen zu können.

Natürliche Ressourcen sparen
Entlang des gesamten Herstellungsprozesses lassen sich Verbräuche von natürlichen Ressourcen reduzieren, unter anderem durch die Anpassung von Produktionsschritten oder den intelligenten Einsatz von Mess- und Regelungstechniken. Ein Beispiel zeigt, dass sich Schlichtemittel im Abwasser durch Ultrafiltration soweit anreichern lässt, dass es dem Schlichtmittelvorgang wieder zugeführt werden kann. Die Rückgewinnungsquote des Schlichtemittels beträgt in diesem Beispiel ca. 80 %. Dies hat zur Folge, dass auch der Chemische Sauerstoffbedarf (CSB-Fracht) im Abwasser um 30 bis 70 % sinkt.

Neben der konkreten Einsparung der Rohstoffe behandelt die Prozesskette auch, wie die eingesetzten Chemikalien verfolgt und analysiert werden können. So lässt sich ermitteln, auf welche Chemikalien aus Gründen des Umweltschutzes verzichtet werden sollte und welche Alternativen es gibt.

Die Prozesskette wird regelmäßig aktualisiert. Dabei ist das Kompetenzzentrum offen für einen Austausch mit Unternehmen, die Industrietextilien bzw. Teile davon herstellen. Erstellt wurde die Prozesskette im Auftrag des Bundesumweltministeriums.

Link zum Tool

Source:

VDI Zentrum Ressourceneffizienz

13.10.2021

Sales partnership for Switzerland starts at Fakuma 2021

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

"GRAFE fits perfectly into our product portfolio," says Thomas Weigl, co-owner and responsible for business development at the Swiss distribution company, whose employees recently underwent intensive training in Blankenhain. "Our customers come from the sports goods, housing technology, automotive supplier and medical technology sectors - there are many synergies with GRAFE." Weigl himself has extensive experience in the masterbatch sector and has worked for two companies in the industry - Sukano and Americhem - as managing director. "Swiss companies want Swiss contact persons. We speak the languages German, Italian and French, are on site in the shortest possible time, offer direct contact and understand the needs of the customers and the requirements of the market," he explains. "Polynova is thus faster, closer and more direct." "The Swiss market is large and important for us," reports Theuerkauf and Weigl explains the background: "There are over 300 plastics processors, many are family-run and very technically oriented. The origins of the companies are often in the watch industry and in the production of the smallest precision parts such as gear wheels. In addition, coffee machine manufacturers, medical technology providers and automotive suppliers are important market players. A large number of well-known OEMs are located here."

Even though there are already masterbatch manufacturers in the Alpine country, says the sales expert, no one has the know-how to adjust compounds and masterbatches as perfectly and precisely as the company from Thuringia. In addition to a complete range of colours on practically all plastic substrates, flame retardants, UV additives, thermal stabilisers or lubricants are further examples of the extensive product portfolio. GRAFE is one of the specialists in the modification of thermoplastics and is an innovation driver in the production of colour masterbatches. "The technical possibilities in terms of a state-of-the-art technical centre and production machinery, as well as one of the largest research and development departments in the industry, are also not to be found elsewhere on the Swiss market. Our task now is to bring these to the attention of domestic customers," says Thomas Weigl, co-owner of Polynova AG together with founder Renato R. Huebscher.

Source:

GRAFE Advanced Polymers GmbH

Photo: Hexcel Corporation
14.09.2020

True Temper Sports partners with Hexcel

True Temper Sports, leading designers and manufacturers of golf shafts, has chosen to partner with Hexcel on its latest product line, the HZRDUS Smoke Black RDX. The HZRDUS Smoke Black RDX is the first golf shaft to use Hexcel’s new HexTow® HM54 carbon fiber, which is ideal for recreational applications.

HZRDUS has emerged as one of the most dominant shafts at all levels of golf over the past 50 years, and the RDX is the next evolution in the HZRDUS line. By partnering with Hexcel to incorporate HexTow HM54, True Temper has taken its designs to the next level. HZRDUS Smoke Black RDX is the first golf shaft to use HexTow HM54 high modulus carbon fiber and combines it with high tensile strength HexTow® IM2C carbon fiber to provide the ideal blend of stiffness and stability desired by engineers to build into the HZRDUS shafts.

True Temper Sports is the No. 1 shaft in golf. It has been used to win more professional golf tournaments than any other shaft manufacturer. True Temper Sports offer shafts under the True Temper, Project X, ACCRA, Aerotech, and Grafalloy brands.

True Temper Sports, leading designers and manufacturers of golf shafts, has chosen to partner with Hexcel on its latest product line, the HZRDUS Smoke Black RDX. The HZRDUS Smoke Black RDX is the first golf shaft to use Hexcel’s new HexTow® HM54 carbon fiber, which is ideal for recreational applications.

HZRDUS has emerged as one of the most dominant shafts at all levels of golf over the past 50 years, and the RDX is the next evolution in the HZRDUS line. By partnering with Hexcel to incorporate HexTow HM54, True Temper has taken its designs to the next level. HZRDUS Smoke Black RDX is the first golf shaft to use HexTow HM54 high modulus carbon fiber and combines it with high tensile strength HexTow® IM2C carbon fiber to provide the ideal blend of stiffness and stability desired by engineers to build into the HZRDUS shafts.

True Temper Sports is the No. 1 shaft in golf. It has been used to win more professional golf tournaments than any other shaft manufacturer. True Temper Sports offer shafts under the True Temper, Project X, ACCRA, Aerotech, and Grafalloy brands.

More information:
Hexcel Golf
Source:

Hexcel Corporation

23.01.2020

SGL Carbon product finder supports selection of optimum graphite sealing material

  • New product finder "Flexible Graphite" finds optimum solutions for the respective customer requirements
  • Identification of the best SIGRAFLEX® graphite gasket material for a specific application

With the help of SGL Carbon’s new product finder "Flexible Graphite", users can quickly select exactly the sealing product that best suits their application requirements - from the range of SIGRAFLEX graphite gasket sheets available. The product finder is accessible free of charge on the company's website and guides the user to the optimum sealing material - online, easily and accurately.

The product finder "Flexible Graphite" can be found on the website at www.sigraflex.com/productfinder

  • New product finder "Flexible Graphite" finds optimum solutions for the respective customer requirements
  • Identification of the best SIGRAFLEX® graphite gasket material for a specific application

With the help of SGL Carbon’s new product finder "Flexible Graphite", users can quickly select exactly the sealing product that best suits their application requirements - from the range of SIGRAFLEX graphite gasket sheets available. The product finder is accessible free of charge on the company's website and guides the user to the optimum sealing material - online, easily and accurately.

The product finder "Flexible Graphite" can be found on the website at www.sigraflex.com/productfinder

More information:
SGL Carbon
Source:

SGL Carbon