Textination Newsline

Reset
192 results
Image: Udo Jandrey
22.03.2024

New model for sustainable structures of textile-reinforced concrete

By reinforcing concrete with textiles instead of steel, it is possible to use less material and create slender, lightweight structures with a significantly lower environmental impact. The technology to utilise carbon fibre textiles already exists, but it has been challenging, among other things, to produce a basis for reliable calculations for complex and vaulted structures. Researchers from Chalmers University of Technology, in Sweden, are now presenting a method that makes it easier to scale up analyses and thus facilitate the construction of more environmentally friendly bridges, tunnels and buildings.

By reinforcing concrete with textiles instead of steel, it is possible to use less material and create slender, lightweight structures with a significantly lower environmental impact. The technology to utilise carbon fibre textiles already exists, but it has been challenging, among other things, to produce a basis for reliable calculations for complex and vaulted structures. Researchers from Chalmers University of Technology, in Sweden, are now presenting a method that makes it easier to scale up analyses and thus facilitate the construction of more environmentally friendly bridges, tunnels and buildings.

"A great deal of the concrete we use today has the function to act as a protective layer to prevent the steel reinforcement from corroding. If we can use textile reinforcement instead, we can reduce cement consumption and also use less concrete − and thus reduce the climate impact," says Karin Lundgren, who is Professor in Concrete Structures at the Department of Architecture and Civil Engineering at Chalmers.

Cement is a binder in concrete and its production from limestone has a large impact on the climate. One of the problems is that large amounts of carbon dioxide that have been sequestered in the limestone are released during production. Every year, about 4.5 billion tonnes of cement are produced in the world and the cement industry accounts for about 8 percent of global carbon dioxide emissions. Intensive work is therefore underway to find alternative methods and materials for concrete structures.

Reduced carbon footprint with thinner constructions and alternative binders
By using alternative binders instead of cement, such as clay or volcanic ash, it is possible to further reduce carbon dioxide emissions. But so far, it is unclear how well such new binders can protect steel reinforcement in the long term.

"You could get away from the issue of corrosion protection, by using carbon-fibres as reinforcement material instead of steel, because it doesn't need to be protected in the same way. You can also gain even more by optimising thin shell structures with a lower climate impact," says Karin Lundgren.

In a recently published study in the journal Construction and Building Materials, Karin Lundgren and her colleagues describe a new modelling technique that was proved to be reliable in analyses describing how textile reinforcement interacts with concrete.

"What we have done is to develop a method that facilitates the calculation work of complex structures and reduces the need for testing of the load-bearing capacity," says Karin Lundgren.

One area where textile reinforcement technology could significantly reduce the environmental impact is in the construction of arched floors. Since the majority of a building’s climate impact during production comes from the floor structures, it is an effective way to build more sustainably. A previous research study from the University of Cambridge shows that textile reinforcement can reduce carbon dioxide emissions by up to 65 percent compared to traditional solid floors.

Method that facilitates calculations
A textile reinforcement mesh consists of yarns, where each yarn consists of thousands of thin filaments (long continuous fibres). The reinforcement mesh is cast into concrete, and when the textile-reinforced concrete is loaded, the filaments slip both against the concrete and against each other inside the yarn. A textile yarn in concrete does not behave as a unit, which is important when you want to understand the composite material's ability to carry loads. The modelling technique developed by the Chalmers researchers describes these effects.

"You could describe it as the yarn consisting of an inner and an outer core, which is affected to varying degrees when the concrete is loaded. We developed a test and calculation method that describes this interaction. In experiments, we were able to show that our way of calculating is reliable enough even for complex structures," says Karin Lundgren.

The work together with colleagues is now continuing to develop optimisation methods for larger structures.

"Given that the United Nations Environment Programme (UNEP) expects the total floor area in the world to double over the next 40 years due to increased prosperity and population growth, we must do everything we can to build as resource-efficiently as possible to meet the climate challenge," says Karin Lundgren.

Source:

Chalmers | Mia Halleröd Palmgren

Smart glove teaches new physical skills Image: Alex Shipps/MIT CSAIL
18.03.2024

Smart glove teaches new physical skills

Adaptive smart glove from MIT CSAIL researchers can send tactile feedback to teach users new skills, guide robots with more precise manipulation, and help train surgeons and pilots.

You’ve likely met someone who identifies as a visual or auditory learner, but others absorb knowledge through a different modality: touch. Being able to understand tactile interactions is especially important for tasks such as learning delicate surgeries and playing musical instruments, but unlike video and audio, touch is difficult to record and transfer.

Adaptive smart glove from MIT CSAIL researchers can send tactile feedback to teach users new skills, guide robots with more precise manipulation, and help train surgeons and pilots.

You’ve likely met someone who identifies as a visual or auditory learner, but others absorb knowledge through a different modality: touch. Being able to understand tactile interactions is especially important for tasks such as learning delicate surgeries and playing musical instruments, but unlike video and audio, touch is difficult to record and transfer.

To tap into this challenge, researchers from MIT’s Computer Science and Artificial Intelligence Laboratory (CSAIL) and elsewhere developed an embroidered smart glove that can capture, reproduce, and relay touch-based instructions. To complement the wearable device, the team also developed a simple machine-learning agent that adapts to how different users react to tactile feedback, optimizing their experience. The new system could potentially help teach people physical skills, improve responsive robot teleoperation, and assist with training in virtual reality.

Will I be able to play the piano?
To create their smart glove, the researchers used a digital embroidery machine to seamlessly embed tactile sensors and haptic actuators (a device that provides touch-based feedback) into textiles. This technology is present in smartphones, where haptic responses are triggered by tapping on the touch screen. For example, if you press down on an iPhone app, you’ll feel a slight vibration coming from that specific part of your screen. In the same way, the new adaptive wearable sends feedback to different parts of your hand to indicate optimal motions to execute different skills.

The smart glove could teach users how to play the piano, for instance. In a demonstration, an expert was tasked with recording a simple tune over a section of keys, using the smart glove to capture the sequence by which they pressed their fingers to the keyboard. Then, a machine-learning agent converted that sequence into haptic feedback, which was then fed into the students’ gloves to follow as instructions. With their hands hovering over that same section, actuators vibrated on the fingers corresponding to the keys below. The pipeline optimizes these directions for each user, accounting for the subjective nature of touch interactions.

“Humans engage in a wide variety of tasks by constantly interacting with the world around them,” says Yiyue Luo MS ’20, lead author of the paper, PhD student in MIT’s Department of Electrical Engineering and Computer Science (EECS), and CSAIL affiliate. “We don’t usually share these physical interactions with others. Instead, we often learn by observing their movements, like with piano-playing and dance routines.

“The main challenge in relaying tactile interactions is that everyone perceives haptic feedback differently,” adds Luo. “This roadblock inspired us to develop a machine-learning agent that learns to generate adaptive haptics for individuals’ gloves, introducing them to a more hands-on approach to learning optimal motion.”

The wearable system is customized to fit the specifications of a user’s hand via a digital fabrication method. A computer produces a cutout based on individuals’ hand measurements, then an embroidery machine stitches the sensors and haptics in. Within 10 minutes, the soft, fabric-based wearable is ready to wear. Initially trained on 12 users’ haptic responses, its adaptive machine-learning model only needs 15 seconds of new user data to personalize feedback.

In two other experiments, tactile directions with time-sensitive feedback were transferred to users sporting the gloves while playing laptop games. In a rhythm game, the players learned to follow a narrow, winding path to bump into a goal area, and in a racing game, drivers collected coins and maintained the balance of their vehicle on their way to the finish line. Luo’s team found that participants earned the highest game scores through optimized haptics, as opposed to without haptics and with unoptimized haptics.

“This work is the first step to building personalized AI agents that continuously capture data about the user and the environment,” says senior author Wojciech Matusik, MIT professor of electrical engineering and computer science and head of the Computational Design and Fabrication Group within CSAIL. “These agents then assist them in performing complex tasks, learning new skills, and promoting better behaviors.”

Bringing a lifelike experience to electronic settings
In robotic teleoperation, the researchers found that their gloves could transfer force sensations to robotic arms, helping them complete more delicate grasping tasks. “It’s kind of like trying to teach a robot to behave like a human,” says Luo. In one instance, the MIT team used human teleoperators to teach a robot how to secure different types of bread without deforming them. By teaching optimal grasping, humans could precisely control the robotic systems in environments like manufacturing, where these machines could collaborate more safely and effectively with their operators.

“The technology powering the embroidered smart glove is an important innovation for robots,” says Daniela Rus, the Andrew (1956) and Erna Viterbi Professor of Electrical Engineering and Computer Science at MIT, CSAIL director, and author on the paper. “With its ability to capture tactile interactions at high resolution, akin to human skin, this sensor enables robots to perceive the world through touch. The seamless integration of tactile sensors into textiles bridges the divide between physical actions and digital feedback, offering vast potential in responsive robot teleoperation and immersive virtual reality training.”

Likewise, the interface could create more immersive experiences in virtual reality. Wearing smart gloves would add tactile sensations to digital environments in video games, where gamers could feel around their surroundings to avoid obstacles. Additionally, the interface would provide a more personalized and touch-based experience in virtual training courses used by surgeons, firefighters, and pilots, where precision is paramount.

While these wearables could provide a more hands-on experience for users, Luo and her group believe they could extend their wearable technology beyond fingers. With stronger haptic feedback, the interfaces could guide feet, hips, and other body parts less sensitive than hands.

Luo also noted that with a more complex artificial intelligence agent, her team's technology could assist with more involved tasks, like manipulating clay or driving an airplane. Currently, the interface can only assist with simple motions like pressing a key or gripping an object. In the future, the MIT system could incorporate more user data and fabricate more conformal and tight wearables to better account for how hand movements impact haptic perceptions.

Luo, Matusik, and Rus authored the paper with EECS Microsystems Technology Laboratories Director and Professor Tomás Palacios; CSAIL members Chao Liu, Young Joong Lee, Joseph DelPreto, Michael Foshey, and professor and principal investigator Antonio Torralba; Kiu Wu of LightSpeed Studios; and Yunzhu Li of the University of Illinois at Urbana-Champaign.

The work was supported, in part, by an MIT Schwarzman College of Computing Fellowship via Google and a GIST-MIT Research Collaboration grant, with additional help from Wistron, Toyota Research Institute, and Ericsson.

Source:

Alex Shipps, MIT CSAIL

Empa researcher Simon Annaheim is working to develop a mattress for newborn babies. Image: Empa
11.03.2024

Medical textiles and sensors: Smart protection for delicate skin

Skin injuries caused by prolonged pressure often occur in people who are unable to change their position independently – such as sick newborns in hospitals or elderly people. Thanks to successful partnerships with industry and research, Empa scientists are now launching two smart solutions for pressure sores.

If too much pressure is applied to our skin over a long period of time, it becomes damaged. Populations at high risk of such pressure injuries include people in wheelchairs, newborns in intensive care units and the elderly. The consequences are wounds, infections and pain.

Skin injuries caused by prolonged pressure often occur in people who are unable to change their position independently – such as sick newborns in hospitals or elderly people. Thanks to successful partnerships with industry and research, Empa scientists are now launching two smart solutions for pressure sores.

If too much pressure is applied to our skin over a long period of time, it becomes damaged. Populations at high risk of such pressure injuries include people in wheelchairs, newborns in intensive care units and the elderly. The consequences are wounds, infections and pain.

Treatment is complex and expensive: Healthcare costs of around 300 million Swiss francs are incurred every year. "In addition, existing illnesses can be exacerbated by such pressure injuries," says Empa researcher Simon Annaheim from the Biomimetic Membranes and Textiles laboratory in St. Gallen. According to Annaheim, it would be more sustainable to prevent tissue damage from occurring in the first place. Two current research projects involving Empa researchers are now advancing solutions: A pressure-equalizing mattress for newborns in intensive care units and a textile sensor system for paraplegics and bedridden people are being developed.

Optimally nestled at the start of life
The demands of our skin are completely different depending on age: In adults, the friction of the skin on the lying surface, physical shear forces in the tissue and the lack of breathability of textiles are the main risk factors. In contrast, the skin of newborns receiving intensive care is extremely sensitive per se, and any loss of fluid and heat through the skin can become a problem. "While these particularly vulnerable babies are being nursed back to health, the lying situation should not cause any additional complications," says Annaheim. He thinks conventional mattresses are not appropriate for newborns with very different weights and various illnesses. Annaheim's team is therefore working with researchers from ETH Zurich, the Zurich University of Applied Sciences (ZHAW) and the University Children's Hospital Zurich to find an optimal lying surface for babies' delicate skin. This mattress should be able to adapt individually to the body in order to help children with a difficult start in life.

In order to do this, the researchers first determined the pressure conditions in the various regions of the newborn's body. "Our pressure sensors showed that the head, shoulders and lower spine are the areas with the greatest risk of pressure sores," says Annaheim. These findings were incorporated into the development of a special kind of air-filled mattress: With the help of pressure sensors and a microprocessor, its three chambers can be filled precisely via an electronic pump so that the pressure in the respective areas is minimized. An infrared laser process developed at Empa made it possible to produce the mattress from a flexible, multi-layered polymer membrane that is gentle on the skin and has no irritating seams.

After a multi-stage development process in the laboratory, the first small patients were allowed to lie on the prototype mattress. The effect was immediately noticeable when the researchers filled the mattress with air to varying degrees depending on the individual needs of the babies: Compared to a conventional foam mattress, the prototype reduced the pressure on the vulnerable parts of the body by up to 40 percent.

Following this successful pilot study, the prototype is now being optimized in the Empa labs. Simon Annaheim and doctoral student Tino Jucker will soon be starting a larger-scale study with the new mattress with the Department of Intensive Care Medicine & Neonatology at University Children's Hospital Zurich.

Intelligent sensors prevent injuries
In another project, Empa researchers are working on preventing so-called pressure ulcer tissue damage in adults. This involves converting the risk factors of pressure and circulatory disorders into helpful warning signals.

If you lie in the same position for a long time, pressure and circulatory problems lead to an undersupply of oxygen to the tissue. While the lack of oxygen triggers a reflex to move in healthy people, this neurological feedback loop can be disrupted in people with paraplegia or coma patients, for example. Here, smart sensors can help to provide early warning of the risk of tissue damage.

In the ProTex project, a team of researchers from Empa, the University of Bern, the OST University of Applied Sciences and Bischoff Textil AG in St. Gallen has developed a sensor system made of smart textiles with associated data analysis in real time. "The skin-compatible textile sensors contain two different functional polymer fibers," says Luciano Boesel from Empa's Biomimetic Membranes and Textiles laboratory in St. Gallen. In addition to pressure-sensitive fibers, the researchers integrated light-conducting polymer fibers (POFs), which are used to measure oxygen. "As soon as the oxygen content in the skin drops, the highly sensitive sensor system signals an increasing risk of tissue damage," explains Boesel. The data is then transmitted directly to the patient or to the nursing staff. This means, for instance, that a lying person can be repositioned in good time before the tissue is damaged.

Patented technology
The technology behind this also includes a novel microfluidic wet spinning process developed at Empa for the production of POFs. It allows precise control of the polymer components in the micrometer range and smoother, more environmentally friendly processing of the fibers. The microfluidic process is one of three patents that have emerged from the ProTex project to date.

Another product is a breathable textile sensor that is worn directly on the skin. The spin-off Sensawear in Bern, which emerged from the project in 2023, is currently pushing ahead with the market launch. Empa researcher Boesel is also convinced: "The findings and technologies from ProTex will enable further applications in the field of wearable sensor technology and smart clothing in the future."

Source:

Dr. Andrea Six, Empa

Feathers from waterfowl (c) Daunen- und Federnverbände Mainz
05.03.2024

Adhesives: Feathers replace petroleum

Adhesives are almost always based on fossil raw materials such as petroleum. Researchers at Fraunhofer have recently developed a process that allows to utilize keratin for this purpose. This highly versatile protein compound can be found, for instance, in chicken feathers. Not only can it be used to manufacture a host of different adhesives for a variety of applications, but the processes and end products are also sustainable and follow the basic principles underlying a bioinspired circular economy. The project, developed together with Henkel AG & Co. KGaA, addresses a billion-dollar market.

Adhesives are almost always based on fossil raw materials such as petroleum. Researchers at Fraunhofer have recently developed a process that allows to utilize keratin for this purpose. This highly versatile protein compound can be found, for instance, in chicken feathers. Not only can it be used to manufacture a host of different adhesives for a variety of applications, but the processes and end products are also sustainable and follow the basic principles underlying a bioinspired circular economy. The project, developed together with Henkel AG & Co. KGaA, addresses a billion-dollar market.

Adhesives are found nearly everywhere: in sports shoes, smartphones, floor coverings, furniture, textiles or packaging. Even auto windshields are glued into place using adhesives. Experts recognize more than 1,000 different types of adhesives. These can bond almost every imaginable material to another. Adhesives weigh very little and so lend themselves to lightweight design. Surfaces bonded with adhesive do not warp because, unlike with screw fastenings, the load is distributed evenly. Adhesives do not rust, and seal out moisture. Surfaces bonded with adhesive are also less susceptible to vibration. Added to which, adhesives are inexpensive and relatively easy to work with.

Feathers from poultry meat production
Traditionally, adhesives have almost always been made from fossil raw materials such as petroleum. The Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB has recently adopted a different approach. Researchers there have been using feathers as a base material instead of petroleum. Feathers are a by-product of poultry meat production. They are destroyed or mixed into animal feed. But feathers are far too valuable to go to waste because they contain the structural protein keratin. This biopolymer is found in animals and makes up talons, claws, hooves or feathers. Its fibrous structure is extremely strong.

Why keratin is perfect for manufacturing adhesives
Keratin is a biodegradable and thus eco-friendly material whose structure has specific properties that make it particularly suitable for the manufacture of adhesives. Keratin's polymer structure, i.e., its very long-chain molecules, as well as its ability to undergo cross-linking reactions predestine it for the manufacture of various adhesives. “The properties required for adhesives are to some extent already inherent in the base material and only need to be unlocked, modified and activated,” explains project manager Dr. Michael Richter.

Platform chemical and specialty adhesives
Over the past three years, Fraunhofer IGB has been working with Henkel AG & Co. KGaA on the KERAbond project: “Specialty chemicals from customized functional keratin proteins” — Kera being short for keratin, combined with the English word bond. Henkel is a global market leader in the adhesives sector.

The partners in the project have recently developed and refined a new process. In the first stage, feathers received from the slaughterhouse are sterilized, washed and mechanically shredded. Next, an enzyme process splits the long-chain biopolymers or protein chains into short-chain polymers by means of hydrolysis.

The output product is a platform chemical that can serve as a base material for further development of specially formulated adhesives. “We use the process      and the platform chemical as a “toolbox” to integrate bio-enhanced properties into the end product,” says Richter. This means parameters can be specified for the target special adhesive such as curing time, elasticity, thermal properties or strength. Also, it’s not just adhesives that are easy to manufacture but also related substances such as hardeners, coatings or primers.

In the next stage, the Fraunhofer team set about converting the feathers on a large scale. Ramping up the process fell to the Fraunhofer Center for Chemical-Biotechnological Processes CBP in Leuna. The aim was to prove that the keratin-based platform chemicals can also be manufactured cost-efficiently on an industrial scale. This involved processing several kilograms of chicken feathers, with the material produced being used for promising initial material trials at Fraunhofer IGB and Henkel.

Foundations of a bioinspired economy
This bioinspired process is of particular significance for the Fraunhofer-Gesellschaft. Biotechnology is in fact one of the main fields of research for the Fraunhofer-Gesellschaft: “We draw our inspiration from functionality or properties that already exist in nature or in natural raw materials. And we attempt to translate these properties into products through innovative manufacturing methods. This generates a bioinspired cycle for valuable raw materials, Richter explains.

The project carries some economic weight. According to Statista, around one million tons of adhesives were manufactured in Germany alone in 2019. Total value is around 1.87 billion euros.

A patent application has been filed for the new process and an article published in a scientific journal. Two PhD students who have conducted extensive research on the project at Henkel and Fraunhofer are expected to complete their theses in the first quarter of 2024. This new keratin-based technology will allow a host of platform chemicals to be produced in a sustainable, bioinspired way.

The KERAbond project has been funded and supported over the past three years by Fachagentur Nachwachsende Rohstoffe (FNR) in Gülzow on behalf of the Federal Ministry of Food and Agriculture (BMEL) under the Renewable Resources Funding funding program (grant number 22014218).

Source:

Fraunhofer IBG

Wearable Robots for Parkinson’s Disease Image: Tom Claes, unsplash
19.02.2024

Wearable Robots for Parkinson’s Disease

Freezing is one of the most common and debilitating symptoms of Parkinson’s disease, a neurodegenerative disorder that affects more than 9 million people worldwide. When individuals with Parkinson’s disease freeze, they suddenly lose the ability to move their feet, often mid-stride, resulting in a series of staccato stutter steps that get shorter until the person stops altogether. These episodes are one of the biggest contributors to falls among people living with Parkinson’s disease.

Today, freezing is treated with a range of pharmacological, surgical or behavioral therapies, none of which are particularly effective. What if there was a way to stop freezing altogether?

Freezing is one of the most common and debilitating symptoms of Parkinson’s disease, a neurodegenerative disorder that affects more than 9 million people worldwide. When individuals with Parkinson’s disease freeze, they suddenly lose the ability to move their feet, often mid-stride, resulting in a series of staccato stutter steps that get shorter until the person stops altogether. These episodes are one of the biggest contributors to falls among people living with Parkinson’s disease.

Today, freezing is treated with a range of pharmacological, surgical or behavioral therapies, none of which are particularly effective. What if there was a way to stop freezing altogether?

Researchers from the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) and the Boston University Sargent College of Health & Rehabilitation Sciences have used a soft, wearable robot to help a person living with Parkinson’s walk without freezing. The robotic garment, worn around the hips and thighs, gives a gentle push to the hips as the leg swings, helping the patient achieve a longer stride.

The device completely eliminated the participant’s freezing while walking indoors, allowing them to walk faster and further than they could without the garment’s help.

“We found that just a small amount of mechanical assistance from our soft robotic apparel delivered instan-taneous effects and consistently improved walking across a range of conditions for the individual in our study,” said Conor Walsh, the Paul A. Maeder Professor of Engineering and Applied Sciences at SEAS and co-corresponding author of the study.

The research demonstrates the potential of soft robotics to treat this frustrating and potentially dangerous symptom of Parkinson’s disease and could allow people living with the disease to regain not only their mobility but their independence.

For over a decade, Walsh’s Biodesign Lab at SEAS has been developing assistive and rehabilitative robotic technologies to improve mobility for individuals’ post-stroke and those living with ALS or other diseases that impact mobility. Some of that technology, specifically an exosuit for post-stroke gait retraining, received support from the Wyss Institute for Biologically Inspired Engineering, and Harvard’s Office of Technology Development coordinated a license agreement with ReWalk Robotics to commercialize the technology.

In 2022, SEAS and Sargent College received a grant from the Massachusetts Technology Collaborative to support the development and translation of next-generation robotics and wearable technologies. The research is centered at the Move Lab, whose mission is to support advances in human performance enhancement with the collaborative space, funding, R&D infrastructure, and experience necessary to turn promising research into mature technologies that can be translated through collaboration with industry partners. This research emerged from that partnership.

“Leveraging soft wearable robots to prevent freezing of gait in patients with Parkinson’s required a collaboration between engineers, rehabilitation scientists, physical therapists, biomechanists and apparel designers,” said Walsh, whose team collaborated closely with that of Terry Ellis,  Professor and Physical Therapy Department Chair and Director of the Center for Neurorehabilitation at Boston University.

Leveraging soft wearable robots to prevent freezing of gait in patients with Parkinson’s required a collaboration between engineers, rehabilitation scientists, physical therapists, biomechanists and apparel designers.

The team spent six months working with a 73-year-old man with Parkinson’s disease, who — despite using both surgical and pharmacologic treatments — endured substantial and incapacitating freezing episodes more than 10 times a day, causing him to fall frequently. These episodes prevented him from walking around his community and forced him to rely on a scooter to get around outside.

In previous research, Walsh and his team leveraged human-in-the-loop optimization to demonstrate that a soft, wearable device could be used to augment hip flexion and assist in swinging the leg forward to provide an efficient approach to reduce energy expenditure during walking in healthy individuals.

Here, the researchers used the same approach but to address freezing. The wearable device uses cable-driven actuators and sensors worn around the waist and thighs. Using motion data collected by the sensors, algorithms estimate the phase of the gait and generate assistive forces in tandem with muscle movement.

The effect was instantaneous. Without any special training, the patient was able to walk without any freezing indoors and with only occasional episodes outdoors. He was also able to walk and talk without freezing, a rarity without the device.

“Our team was really excited to see the impact of the technology on the participant’s walking,” said Jinsoo Kim, former PhD student at SEAS and co-lead author on the study.

During the study visits, the participant told researchers: “The suit helps me take longer steps and when it is not active, I notice I drag my feet much more. It has really helped me, and I feel it is a positive step forward. It could help me to walk longer and maintain the quality of my life.”

“Our study participants who volunteer their time are real partners,” said Walsh. “Because mobility is difficult, it was a real challenge for this individual to even come into the lab, but we benefited so much from his perspective and feedback.”

The device could also be used to better understand the mechanisms of gait freezing, which is poorly understood.

“Because we don’t really understand freezing, we don’t really know why this approach works so well,” said Ellis. “But this work suggests the potential benefits of a ’bottom-up’ rather than ’top-down’ solution to treating gait freezing. We see that restoring almost-normal biomechanics alters the peripheral dynamics of gait and may influence the central processing of gait control.”

The research was co-authored by Jinsoo Kim, Franchino Porciuncula, Hee Doo Yang, Nicholas Wendel, Teresa Baker and Andrew Chin. Asa Eckert-Erdheim and Dorothy Orzel also contributed to the design of the technology, as well as Ada Huang, and Sarah Sullivan managed the clinical research. It was supported by the National Science Foundation under grant CMMI-1925085; the National Institutes of Health under grant NIH U01 TR002775; and the Massachusetts Technology Collaborative, Collaborative Research and Development Matching Grant.

Source:

The research is published in Nature Medicine.
Source Leah Burrows
Harvard John A. Paulson. School of Engineering and Applied Sciences

Researchers led by Bernd Nowack have investigated the release of nanoparticles during the washing of polyester textiles. Image: Empa Image: Empa
14.02.2024

Release of oligomers from polyester textiles

When nanoplastics are not what they seem ... Textiles made of synthetic fibers release micro- and nanoplastics during washing. Empa researchers have now been able to show: Some of the supposed nanoplastics do not actually consist of plastic particles, but of water-insoluble oligomers. The effects they have on humans and the environment are not yet well-understood.

Plastic household items and clothing made of synthetic fibers release microplastics: particles less than five millimetres in size that can enter the environment unnoticed. A small proportion of these particles are so small that they are measured in nanometers. Such nanoplastics are the subject of intensive research, as nanoplastic particles can be absorbed into the human body due to their small size – but, as of today, little is known about their potential toxicity.

When nanoplastics are not what they seem ... Textiles made of synthetic fibers release micro- and nanoplastics during washing. Empa researchers have now been able to show: Some of the supposed nanoplastics do not actually consist of plastic particles, but of water-insoluble oligomers. The effects they have on humans and the environment are not yet well-understood.

Plastic household items and clothing made of synthetic fibers release microplastics: particles less than five millimetres in size that can enter the environment unnoticed. A small proportion of these particles are so small that they are measured in nanometers. Such nanoplastics are the subject of intensive research, as nanoplastic particles can be absorbed into the human body due to their small size – but, as of today, little is known about their potential toxicity.

Empa researchers from Bernd Nowack's group in the Technology and Society laboratory have now joined forces with colleagues from China to take a closer look at nanoparticles released from textiles. Tong Yang, first author of the study, carried out the investigations during his doctorate at Empa. In earlier studies, Empa researchers were already able to demonstrate that both micro- and nanoplastics are released when polyester is washed. A detailed examination of the released nanoparticles released has now shown that not everything that appears to be nanoplastic at first glance actually is nanoplastic.

To a considerable extent, the released particles were in fact not nanoplastics, but clumps of so-called oligomers, i.e. small to medium-sized molecules that represent an intermediate stage between the long-chained polymers and their individual building blocks, the monomers. These molecules are even smaller than nanoplastic particles, and hardly anything is known about their toxicity either. The researchers published their findings in the journal Nature Water.

For the study, the researchers examined twelve different polyester fabrics, including microfiber, satin and jersey. The fabric samples were washed up to four times and the nanoparticles released in the process were analyzed and characterized. Not an easy task, says Bernd Nowack. "Plastic, especially nanoplastics, is everywhere, including on our devices and utensils," says the scientist. "When measuring nanoplastics, we have to take this 'background noise' into account."

Large proportion of soluble particles
The researchers used an ethanol bath to distinguish nanoplastics from clumps of oligomers. Plastic pieces, no matter how small, do not dissolve in ethanol, but aggregations of oligomers do. The result: Around a third to almost 90 percent of the nanoparticles released during washing could be dissolved in ethanol. "This allowed us to show that not everything that looks like nanoplastics at first glance is in fact nanoplastics," says Nowack.

It is not yet clear whether the release of so-called nanoparticulate oligomers during the washing of textiles has negative effects on humans and the environment. "With other plastics, studies have already shown that nanoparticulate oligomers are more toxic than nanoplastics," says Nowack. "This is an indication that this should be investigated more closely." However, the researchers were able to establish that the nature of the textile and the cutting method – scissors or laser – have no major influence on the quantity of particles released.

The mechanism of release has not been clarified yet either – neither for nanoplastics nor for the oligomer particles. The good news is that the amount of particles released decreases significantly with repeated washes. It is conceivable that the oligomer particles are created during the manufacturing of the textile or split off from the fibers through chemical processes during storage. Further studies are also required in this area.

Nowack and his team are focusing on larger particles for the time being: In their next project, they want to investigate which fibers are released during washing of textiles made from renewable raw materials and whether these could be harmful to the environment and health. "Semi-synthetic textiles such as viscose or lyocell are being touted as a replacement for polyester," says Nowack. "But we don't yet know whether they are really better when it comes to releasing fibers."

Source:

Empa

Bacteria, eating Plastic and producing Multipurpose Spider Silk Photo: Kareni, Pixabay
05.02.2024

Bacteria, eating Plastic and producing Multipurpose Spider Silk

For the first time, researchers have used bacteria to “upcycle” waste polyethylene: Move over Spider-Man: Researchers at Rensselaer Polytechnic Institute have developed a strain of bacteria that can turn plastic waste into a biodegradable spider silk with multiple uses.

Their new study marks the first time scientists have used bacteria to transform polyethylene plastic — the kind used in many single-use items — into a high-value protein product.

That product, which the researchers call “bio-inspired spider silk” because of its similarity to the silk spiders use to spin their webs, has applications in textiles, cosmetics, and even medicine.

For the first time, researchers have used bacteria to “upcycle” waste polyethylene: Move over Spider-Man: Researchers at Rensselaer Polytechnic Institute have developed a strain of bacteria that can turn plastic waste into a biodegradable spider silk with multiple uses.

Their new study marks the first time scientists have used bacteria to transform polyethylene plastic — the kind used in many single-use items — into a high-value protein product.

That product, which the researchers call “bio-inspired spider silk” because of its similarity to the silk spiders use to spin their webs, has applications in textiles, cosmetics, and even medicine.

“Spider silk is nature’s Kevlar,” said Helen Zha, Ph.D., an assistant professor of chemical and biological engineering and one of the RPI researchers leading the project. “It can be nearly as strong as steel under tension. However, it’s six times less dense than steel, so it’s very lightweight. As a bioplastic, it’s stretchy, tough, nontoxic, and biodegradable.”

All those attributes make it a great material for a future where renewable resources and avoidance of persistent plastic pollution are the norm, Zha said.

Polyethylene plastic, found in products such as plastic bags, water bottles, and food packaging, is the biggest contributor to plastic pollution globally and can take upward of 1,000 years to degrade naturally. Only a small portion of polyethylene plastic is recycled, so the bacteria used in the study could help “upcycle” some of the remaining waste.

Pseudomonas aeruginosa, the bacteria used in the study, can naturally consume polyethylene as a food source. The RPI team tackled the challenge of engineering this bacteria to convert the carbon atoms of polyethylene into a genetically encoded silk protein. Surprisingly, they found that their newly developed bacteria could make the silk protein at a yield rivaling some bacteria strains that are more conventionally used in biomanufacturing.

The underlying biological process behind this innovation is something people have employed for millennia.

“Essentially, the bacteria are fermenting the plastic. Fermentation is used to make and preserve all sorts of foods, like cheese, bread, and wine, and in biochemical industries it’s used to make antibiotics, amino acids, and organic acids,” said Mattheos Koffas, Ph.D., Dorothy and Fred Chau ʼ71 Career Development Constellation Professor in Biocatalysis and Metabolic Engineering, and the other researcher leading the project, and who, along with Zha, is a member of the Center for Biotechnology and Interdisciplinary Studies at Rensselaer.

To get bacteria to ferment polyethylene, the plastic is first “predigested,” Zha said. Just like humans need to cut and chew our food into smaller pieces before our bodies can use it, the bacteria has difficulty eating the long molecule chains, or polymers, that comprise polyethylene.

In the study, Zha and Koffas collaborated with researchers at Argonne National Laboratory, who depolymerized the plastic by heating it under pressure, producing a soft, waxy substance. Next, the team put a layer of the plastic-derived wax on the bottoms of flasks, which served as the nutrient source for the bacteria culture. This contrasts with typical fermentation, which uses sugars as the nutrient source.

“It’s as if, instead of feeding the bacteria cake, we’re feeding it the candles on the cake,” Zha said.

Then, as a warming plate gently swirled the flasks’ contents, the bacteria went to work. After 72 hours, the scientists strained out the bacteria from the liquid culture, purified the silk protein, and freeze dried it. At that stage, the protein, which resembled torn up cotton balls, could potentially be spun into thread or made into other useful forms.

“What’s really exciting about this process is that, unlike the way plastics are produced today, our process is low energy and doesn’t require the use of toxic chemicals,” Zha said. “The best chemists in the world could not convert polyethylene into spider silk, but these bacteria can. We’re really harnessing what nature has developed to do manufacturing for us.”

However, before upcycled spider silk products become a reality, the researchers will first need to find ways to make the silk protein more efficiently.

“This study establishes that we can use these bacteria to convert plastic to spider silk. Our future work will investigate whether tweaking the bacteria or other aspects of the process will allow us to scale up production,” Koffas said.

“Professors Zha and Koffas represent the new generation of chemical and biological engineers merging biological engineering with materials science to manufacture ecofriendly products. Their work is a novel approach to protecting the environment and reducing our reliance on nonrenewable resources,” said Shekhar Garde, Ph.D., dean of RPI’s School of Engineering.

The study, which was conducted by first author Alexander Connor, who earned his doctorate from RPI in 2023, and co-authors Jessica Lamb and Massimiliano Delferro with Argonne National Laboratory, is published in the journal “Microbial Cell Factories.”

Source:

Samantha Murray, Rensselaer

Photo: Walmart Inc.
15.01.2024

What is a Virtual Fitting Room? Advantages and Early Adopters

One of the major concerns of online shopping is a consumer’s inability to touch, feel and experience products. This concern is more problematic for fashion products, when the right fit is critical for purchase decisions. Virtual Fitting Room (VFR), a technology that allows consumers to test size and fit without having to try clothing on themselves, eases this concern.

What is a Virtual Fitting Room (VFR)?
A Virtual Fitting Room (VFR) is a function that shows and visualizes a shopper’s outfit without physically trying on and touching items. VFR utilizes Augmented Reality (AR) and Artificial Intelligence (AI). By using AR for VFR, a webcam scans the body shape of shoppers and creates a 360-degree, 3D model based on their body shape.

One of the major concerns of online shopping is a consumer’s inability to touch, feel and experience products. This concern is more problematic for fashion products, when the right fit is critical for purchase decisions. Virtual Fitting Room (VFR), a technology that allows consumers to test size and fit without having to try clothing on themselves, eases this concern.

What is a Virtual Fitting Room (VFR)?
A Virtual Fitting Room (VFR) is a function that shows and visualizes a shopper’s outfit without physically trying on and touching items. VFR utilizes Augmented Reality (AR) and Artificial Intelligence (AI). By using AR for VFR, a webcam scans the body shape of shoppers and creates a 360-degree, 3D model based on their body shape.

AI further operates VFR by using algorithms and machine learning to design a full-body 3D model of a shopper standing in front of the camera. A combination of AR and AI technology allows VFR to place items on real-time images as a live video so that customers can check the size, style and fit of the products they’re considering purchasing.

Shoppers can try on clothes and shoes at home without visiting a physical store. In order to do this, customers need to first make sure they have the right settings on their phone. Then, they download a brands’ mobile applications with the Virtual Fitting Room function or visit apparel brands’ websites that support this VFR function and upload a photo of their body shape. Some brands allow a customer to create an avatar using their body shape to test out the fashion items virtually, instead of uploading a photo of themselves.

How does using a Virtual Fitting Room benefit fashion retailers?

  • Provides a convenient shopping experience
    Research conducted by the National Retail Federation in 2020 stated that 97% of consumers have ended a shopping trip or stopped searching for the item they had in mind because the process was inconvenient.
    Shoppers surveyed not only said that in-person shopping was inconvenient but that online shopping felt even more inconvenient to them.
    VFR eliminates all of these processes. Shoppers can walk over to the VFR and see what the clothes look like quickly without needing to change them.
     
  • Overcomes the limitations of online shopping
    As of 2017, 62% of shoppers preferred to shop at physical apparel stores because they could see, touch, feel and experience products. This was a major problem that online shopping could not overcome.
    VFR solves this problem effectively. According to a Retail Perceptions Report, about 40% of buyers said they would be willing to pay more if they could experience the product through AR technology. By incorporating new technologies, VFR makes shopping fun and offers a personalized shopping experience to customers, which can attract more people to online channels.
     
  • Reduces the return rate
    High return rates are a big administrative headache for fashion brands. Moreover, it threatens to cut into the profits of fashion brands if they offer free returns. 30% of the return rate in e-commerce fashion shopping is due to purchases of small-sized products, and another 22% happens due to purchases of too large-sized products.
    However, VFR alleviates this problem. Whether in store or online, people can check the fit and size of items without having to wear them themselves.

Which brands are already using Virtual Fitting Room (VFR) technology?
Gucci

Gucci is the first luxury brand which adopted VFR. They partnered with Snapchat to launch an augmented reality shoe try-on campaign. It created a virtual lens that superimposed and overlaid a digital version of the shoe on the shopper’s foot when the foot was photographed using a cell phone camera.

Along with the Shop Now button, which guides shoppers to its online store, Gucci achieved 18.9 million Snapchat users and reported positive return on ad spend, which is a marketing metric that measures the amount of revenue earned on all dollars spent on advertising from this campaign.

Otero Menswear
Otero Menswear is a brand focused on apparel for men shorter than 5’10” (1,78 m). Otero added VFR software to its online store to provide perfect fitting sizes to its customers. First, it asks customers four quick questions about their height, leg length, waist size and body type. Then, it offers a virtual avatar corresponding with the answers. Shoppers then use this avatar to see how different sizes of Otero clothing would look on them.
 
Walmart
In May 2021, Walmart announced that they plan to acquire Zeekit, a virtual fitting room platform, to provide enhanced and social shopping experiences for customers during the pandemic.

When customers upload pictures of themselves and enter their body dimensions, Zeekit builds a virtual body and then customers can dress it accordingly. Customers will simply post their photos or choose virtual models on the platform that represent the best fitting of their height, body and skin tone. Shoppers can even share their virtual clothes with others to get various opinions. Walmart brings a comprehensive and social experience to digital shopping for customers through this acquisition of VFR.

According to research by Valuates Reports, it is expected that sales of the global virtual fitting room market will grow to $6.5 million by 2025. By adopting VFR, consumers will be able to experience convenience in an advanced shopping environment. At the same time, fashion retailers will be able to increase online sales and reduce return rates by offering customers personalized online shopping experiences using VFR technology.

Source:

Heekyeong Jo and B. Ellie Jin
This article was originally published by members of the Wilson College of Textiles’ Fashion Textile and Business Excellence Cooperative.

Chemist Unlocks Plastic Alternatives Using Proteins and Clothing Scraps Photo: Challa Kumar, professor emeritus of chemistry, in his lab. (Contributed photo)
21.12.2023

Chemist Unlocks Plastic Alternatives Using Proteins and Clothing Scraps

Challa Kumar has developed methods to create novel plastic-like materials using proteins and fabric.

Every year, 400 million tons of plastic waste are generated worldwide. Between 19 and 23 million tons of that plastic waste makes its way into aquatic ecosystems, and the remaining goes into the ground. An additional 92 million tons of cloth waste is generated annually.

Challa Kumar, professor emeritus of chemistry, “fed up” with the tremendous amount of toxic waste people continually pump into the environment, felt compelled to do something. As a chemist, doing something meant using his expertise to develop new, sustainable materials.

“Everyone should think about replacing fossil fuel-based materials with natural materials anywhere they can to help our civilization to survive,” Kumar says. “The house is on fire, we can’t wait. If the house is on fire and you start digging a well – that is not going to work. It’s time to start pouring water on the house.”

Challa Kumar has developed methods to create novel plastic-like materials using proteins and fabric.

Every year, 400 million tons of plastic waste are generated worldwide. Between 19 and 23 million tons of that plastic waste makes its way into aquatic ecosystems, and the remaining goes into the ground. An additional 92 million tons of cloth waste is generated annually.

Challa Kumar, professor emeritus of chemistry, “fed up” with the tremendous amount of toxic waste people continually pump into the environment, felt compelled to do something. As a chemist, doing something meant using his expertise to develop new, sustainable materials.

“Everyone should think about replacing fossil fuel-based materials with natural materials anywhere they can to help our civilization to survive,” Kumar says. “The house is on fire, we can’t wait. If the house is on fire and you start digging a well – that is not going to work. It’s time to start pouring water on the house.”

Kumar has developed two technologies that use proteins and cloth, respectively, to create new materials. UConn’s Technology Commercialization Services (TCS) has filed provisional patents for both technologies.

Inspired by nature’s ability to construct a diverse array of functional materials, Kumar and his team developed a method to produce continuously tunable non-toxic materials.

“Chemistry is the only thing standing in our way,” Kumar says. “If we understand protein chemistry, we can make protein materials as strong as a diamond or as soft as a feather.”

The first innovation is a process to transform naturally occurring proteins into plastic-like materials. Kumar’s student, Ankarao Kalluri ’23 Ph.D., worked on this project.

Proteins have “reactor groups” on their surfaces which can react with substances with which they come into contact. Using his knowledge of how these groups work, Kumar and his team used a chemical link to bind protein molecules together.

This process creates a dimer – a molecule composed to two proteins. From there, the dimer is joined with another dimer to create tetramer, and so on until it becomes a large 3D molecule. This 3D aspect of the technology is unique, since most synthetic polymers are linear chains.

This novel 3D structure allows the new polymer to behave like a plastic. Just like the proteins of which it is made, the material can stretch, change shape, and fold. Thus, the material can be tailored via chemistry for a variety of specific applications.

Unlike synthetic polymers, because Kumar’s material is made of proteins and a bio-linking chemical, it can biodegrade, just like plant and animal proteins do naturally.

“Nature degrades proteins by ripping apart the amide bonds that are in them,” Kumar says. “It has enzymes to handle that sort of chemistry. We have the same amide linkages in our materials. So, the same enzymes that work in biology should also work on this material and biodegrade it naturally.”

In the lab, the team found that the material degrades within a few days in acidic solution. Now, they are investigating what happens if they bury this material in the ground, which is the fate of many post-consumer plastics.

They have demonstrated that the protein-based material can form a variety of plastic-like products, including coffee cup lids and thin transparent films. It could also be used to make fire-resistant roof tiles, or higher-end materials like, car doors, rocket cone tips, or heart valves.

The next steps for this technology are to continue testing their mechanical properties, like strength or flexibility, as well as toxicity.

“I think we need to have social consciousness that we cannot put out materials into the environment that are toxic,” Kumar says. “We just cannot. We have to stop doing that. And we cannot use materials derived from fossil fuels either.”

Kumar’s second technology uses a similar principle, but instead of just proteins, uses proteins reinforced with natural fibers, specifically cotton.

“We are creating a lot of textile waste each year due to the fast-changing fashion industry” Kumar says. “So why not use that waste to create useful materials – convert waste to wealth.”

Just like the plastic-like protein materials (called “Proteios,” derived from original Greek words), Kumar expects composite materials made from proteins and natural fibers will biodegrade without producing toxic waste.

In the lab, Kumar’s former student, doctoral candidate Adekeye Damilola, created many objects with protein-fabric composites, which include small shoes, desks, flowers, and chairs. This material contains textile fibers which serve as the linking agent with the proteins, rather than the cross-linking chemical Kumar uses for the protein-based plastics.

The crosslinking provides the novel material with the strength to withstand the weight that would be put on something like a chair or a table. The natural affinity between fibers and proteins is why it’s so hard to get food stains out of clothing. This same attraction makes strong protein-fabric materials.

While Kumar’s team has only worked with cotton so far, they expect other fiber materials, like hemp fibers or jute, would behave similarly due to their inherent but common chemical properties with cotton.

“The protein naturally adheres to the surface of the protein,” Kumar says. “We used that understanding to say ‘Hey, if it binds so tightly to cotton, why don’t we make a material out of it.’ And it works, it works amazingly.”

With the support of TCS, Professor Kumar is currently seeking industry partners to bring these technologies to market. For more information contact Michael Invernale at michael.invernale@uconn.edu.

Source:

Anna Zarra Aldrich '20 (CLAS), Office of the Vice President for Research

JUMBO-Textil production © JUMBO-Textil GmbH & Co. KG
28.11.2023

JUMBO-Textil: "For us, leadership means team development."

With its high-quality technical narrow textiles, JUMBO-Textil stands for high-tech - whether woven, braided or knitted. As an elastic specialist and solution partner, the company develops and produces individual innovations for customers worldwide. The 70-strong team must be as diverse and flexible as the products it designs. Textination spoke to industrial engineer Carl Mrusek about the current challenges facing family businesses. Carl Mrusek, who has been Chief Sales Officer (CSO) at Textation Group GmbH & Co. KG, to which JUMBO-Textil belongs, for almost a year now, is in charge of strategic corporate development as well as other areas of responsibility.

 

With its high-quality technical narrow textiles, JUMBO-Textil stands for high-tech - whether woven, braided or knitted. As an elastic specialist and solution partner, the company develops and produces individual innovations for customers worldwide. The 70-strong team must be as diverse and flexible as the products it designs. Textination spoke to industrial engineer Carl Mrusek about the current challenges facing family businesses. Carl Mrusek, who has been Chief Sales Officer (CSO) at Textation Group GmbH & Co. KG, to which JUMBO-Textil belongs, for almost a year now, is in charge of strategic corporate development as well as other areas of responsibility.

 

"In a family business, tradition is the foundation, innovation is the way forward," they say. The image of family-run companies has changed significantly in recent years - old-fashioned values and outdated business concepts have given way to a strong corporate culture, a strong sense of regional responsibility and sustainable planning. How does JUMBO-Textil combine its corporate values and traditions with a contemporary management style?

Carl Mrusek: As a family business, there is a close bond between the employees and the company and vice versa; the continuity of human relationships is important and valuable. JUMBO-Textil also has a tradition of one thing in particular: contemporary corporate management, both technically and professionally, as well as in terms of management style and values. Especially in a family business, which is often managed by the same person for decades, it is crucial to question corporate values and management style and to promote change. A company that has been operating successfully internationally for almost 115 years must be adaptable. For us, reacting quickly to changes, even anticipating them and moving forward accordingly, is at the heart of smart business practices. The specialization in elastics in the 1920s is an example of the foresighted power of change, as is the strategically important turn to technical textiles in the 1970s. A recent example is the merger with vombaur under the umbrella of the Textation Group.

The most important thing in any company is its employees. We would not be able to attract and retain them with outdated traditions and working methods. For us, the focus is not on the company management, but on joint success, and in a complex world, this is usually the result of successful cooperation and not an announcement from the boss. Leadership clearly means setting and pursuing strategic goals, but today it also means team development. Finding the best people, bringing them together and motivating them to achieve the goal.

 

Team spirit and vision development: How do you achieve this at JUMBO-Textil?

Carl Mrusek: As a team! JUMBO-Textil has systematically expanded its management team. In addition to the Managing Director, our CEO Andreas Kielholz, the Chief Operational Officer Patrick Kielholz, the Chief Financial Officer Ralph Cammerath, the Chief Technology Officer Dr. Sven Schöfer and myself as Chief Sales Officer work here. This shows that we are convinced of the idea of cooperation: We also work together on corporate development and strategic issues. The same applies to the individual teams - in organizational specialist teams or in interdisciplinary project teams. The tasks for which we are responsible may be different, but each is equally important.

 

Is that why you start the introduction of contact persons on your website with the Junior Sales Manager? And the C-level representatives are at the end?

Carl Mrusek: Yes, all JUMBO-Textil heads are the head of the company for us. All JUMBO-Textil faces represent the company. This is also reflected in the order of the contact persons on the website. Visitors should be able to quickly find the person who can help them and not find out who runs the company. That's what the legal notice is for. (laughs)

 

What is JUMBO-Textil's mission statement and vision for the future, and what needs to change in order to achieve this vision?

Carl Mrusek: We are currently working on the strategic direction of the Textation Group, which JUMBO-Textil GmbH & Co. KG and vombaur GmbH & Co. KG are part of. In this context, we have developed the Group's corporate vision and mission and updated our mission statement. This serves as a foundation for strategy development and is only sustainable if employees are involved in this process through surveys and workshops. I don't want to give too much away yet, but this much is already clear: strong teams, the right people in the right place, taking responsibility at all levels, sustainability as the basis for innovation - these will be the four cornerstones. You can already see from this: To achieve our vision, we cannot flip a switch. We must always remain open to change, always new - from product development to personnel recruitment. But as I said, we have a tradition of doing this.

 

JUMBO-Textil is not an industry specialist, but combines expertise for demanding high-tech narrow textiles. Who is in charge of challenging customer projects - do you decide in a team or rather top-down, where is the responsibility for an order placed?

Carl Mrusek: As a team, we decide which projects to implement and how to prioritize them. The corporate strategy determines the "direction of travel". In addition to the sales side, the development side of new projects also plays a decisive role. I therefore coordinate intensively with Dr. Sven Schöfer (CTO) and his team, as the focus here is on the technical development and implementation of our products. In the end, project processing is always a team effort between Sales and Development in close cooperation with Production..

 

Between above-standard pay, a 4-day week and the much-vaunted work-life balance in the current situation on the job market, companies are more likely to be in the position of applicants than vice versa. What are you doing to remain attractive as an employer for new colleagues? And how do you keep the enthusiasm of your skilled employees at a consistently high level?

Carl Mrusek: An important approach for us is education. Training young people and proving to them during their apprenticeship: JUMBO-Textil is your place to be. We therefore already start recruiting skilled workers through our school visits and school internships. As a state-of-the-art company, we offer an attractive salary level and a pleasant and healthy working environment.

Applicants today also often want to organize their working hours and work arrangements individually and flexibly, for a variety of reasons. With modern working models and thanks to our ongoing progress in digitalization, we support them wherever possible. People also want to work for a company that they can identify with. Environmental and climate protection are just as important to our employees and applicants as social standards in our supply chain. The fact that we have set ourselves ambitious goals with our sustainability strategy and are consistently pursuing them with firmly scheduled steps - our climate-neutral energy generation is a concrete example that has already been implemented. Furthermore, we vigorously encourage our business partners to respect human and employee rights and are committed to the Code of Conduct of the German textile and fashion industry. All of this helps us to recruit staff.

 

What larger, more capital-intensive companies can partially make up for with financial resources, SMEs have to manage through agility and adaptability - especially in situations of crisis. To what extent are these requirements also reflected in your organizational structure and the requirements profile for employees?

Carl Mrusek: Exactly, that is the advantage that family businesses have over large corporations: We can make decisions quickly and react on a daily basis if necessary. Hierarchies are flat and coordination processes are short. An exciting suggestion doesn't have to be prepared by agencies and coordinated across several levels before it is approved by the management and can be implemented. The go-ahead can also come immediately over lunch: "Great idea, we'll do it." In a corporate group, this fails because only very few employees have the opportunity to have lunch with the management. - And we only talk about business in exceptional cases. Most of the time, the break is about family, the weather, sports and leisure plans - lunch topics, in other words. - We need responsible team players who are willing to make a change. People who work with others on an equal footing, who are committed to the company and its goals with drive and expertise and who are keen to try new things.

 

It now takes much more than a fruit basket and a gym to motivate current and potential employees. Working in a meaningful way and participating in a climate-friendly transformation is particularly important to many people. What does JUMBO-Textil do specifically to not just quote SDGs in a statement, but to live them in everyday company life?

Carl Mrusek: We have set ourselves a specific climate target: By 2035, our administrative and production operations at our headquarters will be climate-neutral. Realistic steps have been defined to achieve this. We have already achieved an important interim goal: at our headquarters in Sprockhövel, we only use green electricity from the sun, wind and water. We offset the unavoidable emissions for our heat generation with CO2 compensation services. We are also developing more and more products from recyclable and recycled materials. Our vehicle fleet is currently being converted to purely electric or hybrid models.

 

Diversification and internationalization are part of every corporate strategy these days. But what do these terms mean for the management style of a medium-sized company in Sprockhövel? Do you consciously build interdisciplinary international teams?

Carl Mrusek: We live in a hyper-diverse society. This is also reflected in our company. Our teams consist of people with different international backgrounds, without us having to actively control this. The age structure is now also very mixed. We see the different perspectives as an asset, an opportunity and a success factor. We - and that ultimately means our customers and their projects - benefit from the variety of perspectives that flow into our solutions. As with many companies in the technical textiles sector, the proportion of women in some teams is still somewhat unbalanced. However, it is fortunately increasing steadily.

 

Generational change and succession planning are core issues for family-run companies. How important is it for JUMBO-Textil to professionalize its management team and to what extent is the company open to external specialists and managers?

Carl Mrusek: A company that closes its doors to external specialists and managers is also closing a door to success. That would be foolish. At JUMBO-Textil, we try to combine and balance the close ties, personal continuity and flexibility of a family-run company, the passion and innovative spirit of a start-up and the solidity and financial strength of a group. With Patrick Kielholz as COO, the next generation of the family is represented at management level, as is the external view and the diversity of perspectives provided by the other new members at C-level. The Textation Group, which also includes Patrick Kielholz's brother Kevin Kielholz, supports the company and enables it to think and act bigger than medium-sized family businesses often do. JUMBO-Textil is an elastic specialist. And what distinguishes our product also distinguishes us as an organization. We span the advantages of a family business as well as those of a start-up and a group. If I may use the image of elasticity here and not stretch it too far. (laughs)

LED Dress Fuses 3D Printing with Futuristic Fashion Photography by Natalie Cartz , Model Perpetua Sermsup Smith, Make-Up Artist Yaying Zheng
20.11.2023

LED Dress Fuses 3D Printing with Futuristic Fashion

  • Designer Anouk Wipprecht Collaborates with Chromatic 3D Materials for a Shining, Motion-Activated Display

Chromatic 3D Materials, a 3D-printing technology company, and high-tech Dutch fashion designer Anouk Wipprecht have unveiled a new futuristic 3D-printed dress that responds to its environment through LEDs. The motion-activated design is among the first garments in the world to directly embed electronics within 3D-printed elastomers. It highlights what the future of creative expression and social interaction may look like as humankind further integrates with technology. Wipprecht’s design was presented at Formnext, the 3D-printing event in Germany.

  • Designer Anouk Wipprecht Collaborates with Chromatic 3D Materials for a Shining, Motion-Activated Display

Chromatic 3D Materials, a 3D-printing technology company, and high-tech Dutch fashion designer Anouk Wipprecht have unveiled a new futuristic 3D-printed dress that responds to its environment through LEDs. The motion-activated design is among the first garments in the world to directly embed electronics within 3D-printed elastomers. It highlights what the future of creative expression and social interaction may look like as humankind further integrates with technology. Wipprecht’s design was presented at Formnext, the 3D-printing event in Germany.

Wipprecht’s avant-garde design highlights the potential of Chromatic’s 3D-printing technology and ChromaFlow 70™ material for commercial use. The designer used 3D printing to adhere nearly 75 flexible, 3D-printed LED domes to the fabric of the dress without adhesive or stitching. That capability could be used to create innovative running apparel, bags, footwear and other products including automotive and aerospace interiors, outdoor recreational equipment and personal protective equipment.  

The unique garment also demonstrates the flexibility of Chromatic’s materials. Unlike other 3D-printed materials, which tend to be brittle and hard, the dress features ChromaFlow 70™, a pliable, heat-resistant material that can drape and stretch more than four times its length without breaking. That flexibility makes it suitable for adding soft and seamless structural, functional and aesthetic elements that are useful for intimate and leisure apparel, sportswear, swimwear and other garments where comfort, silhouette and durability are crucial.

"Using Chromatic’s 3D materials to print offers numerous possibilities for the fashion industry. For designers like me, who incorporate electronics into our creations, it provides a unique opportunity of embedding and securing electronic parts within the printing process,“ says Anouk Wipprecht. “This is my most wearable — and washable — 3D-printed dress yet! As the electronics are enclosed, the material allows me to diffuse my LED lights, and the elastomer is both flexible and strong — making it excellent to bond to fabrics.”

“This collaboration is more than a partnership — it's a vision coming to life. By merging the genius of Anouk Wipprecht with our innovative 3D printing, we're setting the precedent for the future of fashion. We are embarking on a journey that amplifies the boundless integration of tech and art, opening doors for endless possibilities and applications in textiles and fashion,” said Cora Leibig, founder and CEO of Chromatic 3D Materials.

Source:

Chromatic 3D Materials

06.11.2023

Shape-shifting fiber can produce morphing fabrics

The low-cost FibeRobo, which is compatible with existing textile manufacturing techniques, could be used in adaptive performance wear or compression garments.

Researchers from MIT and Northeastern University developed a liquid crystal elastomer fiber that can change its shape in response to thermal stimuli. The fiber, which is fully compatible with existing textile manufacturing machinery, could be used to make morphing textiles, like a jacket that becomes more insulating to keep the wearer warm when temperatures drop.

The low-cost FibeRobo, which is compatible with existing textile manufacturing techniques, could be used in adaptive performance wear or compression garments.

Researchers from MIT and Northeastern University developed a liquid crystal elastomer fiber that can change its shape in response to thermal stimuli. The fiber, which is fully compatible with existing textile manufacturing machinery, could be used to make morphing textiles, like a jacket that becomes more insulating to keep the wearer warm when temperatures drop.

Instead of needing a coat for each season, imagine having a jacket that would dynamically change shape so it becomes more insulating to keep you warm as the temperature drops.
A programmable, actuating fiber developed by an interdisciplinary team of MIT researchers could someday make this vision a reality. Known as FibeRobo, the fiber contracts in response to an increase in temperature, then self-reverses when the temperature decreases, without any embedded sensors or other hard components.

The low-cost fiber is fully compatible with textile manufacturing techniques, including weaving looms, embroidery, and industrial knitting machines, and can be produced continuously by the kilometer. This could enable designers to easily incorporate actuation and sensing capabilities into a wide range of fabrics for myriad applications.

The fibers can also be combined with conductive thread, which acts as a heating element when electric current runs through it. In this way, the fibers actuate using electricity, which offers a user digital control over a textile’s form. For instance, a fabric could change shape based on any piece of digital information, such as readings from a heart rate sensor.

“We use textiles for everything. We make planes with fiber-reinforced composites, we cover the International Space Station with a radiation-shielding fabric, we use them for personal expression and performance wear. So much of our environment is adaptive and responsive, but the one thing that needs to be the most adaptive and responsive — textiles — is completely inert,” says Jack Forman, a graduate student in the Tangible Media Group of the MIT Media Lab, with a secondary affiliation at the Center for Bits and Atoms, and lead author of a paper on the actuating fiber.

He is joined on the paper by 11 other researchers at MIT and Northeastern University, including his advisors, Professor Neil Gershenfeld, who leads the Center for Bits and Atoms, and Hiroshi Ishii, the Jerome B. Wiesner Professor of Media Arts and Sciences and director of the Tangible Media Group. The research will be presented at the ACM Symposium on User Interface Software and Technology.

Morphing materials
The MIT researchers wanted a fiber that could actuate silently and change its shape dramatically, while being compatible with common textile manufacturing procedures. To achieve this, they used a material known as liquid crystal elastomer (LCE).

A liquid crystal is a series of molecules that can flow like liquid, but when they’re allowed to settle, they stack into a periodic crystal arrangement. The researchers incorporate these crystal structures into an elastomer network, which is stretchy like a rubber band.

As the LCE material heats up, the crystal molecules fall out of alignment and pull the elastomer network together, causing the fiber to contract. When the heat is removed, the molecules return to their original alignment, and the material to its original length, Forman explains.

By carefully mixing chemicals to synthesize the LCE, the researchers can control the final properties of the fiber, such as its thickness or the temperature at which it actuates.

They perfected a preparation technique that creates LCE fiber which can actuate at skin-safe temperatures, making it suitable for wearable fabrics.

“There are a lot of knobs we can turn. It was a lot of work to come up with this process from scratch, but ultimately it gives us a lot of freedom for the resulting fiber,” he adds.
However, the researchers discovered that making fiber from LCE resin is a finicky process. Existing techniques often result in a fused mass that is impossible to unspool.

Researchers are also exploring other ways to make functional fibers, such as by incorporating hundreds of microscale digital chips into a polymer, utilizing an activated fluidic system, or including piezoelectric material that can convert sound vibrations into electrical signals.

Fiber fabrication
Forman built a machine using 3D-printed and laser-cut parts and basic electronics to overcome the fabrication challenges. He initially built the machine as part of the graduate-level course MAS.865 (Rapid-Prototyping of Rapid-Prototyping Machines: How to Make Something that Makes [almost] Anything).

To begin, the thick and viscous LCE resin is heated, and then slowly squeezed through a nozzle like that of a glue gun. As the resin comes out, it is cured carefully using UV lights that shine on both sides of the slowly extruding fiber.

If the light is too dim, the material will separate and drip out of the machine, but if it is too bright, clumps can form, which yields bumpy fibers.

Then the fiber is dipped in oil to give it a slippery coating and cured again, this time with UV lights turned up to full blast, creating a strong and smooth fiber. Finally, it is collected into a top spool and dipped in powder so it will slide easily into machines for textile manufacturing.
From chemical synthesis to finished spool, the process takes about a day and produces approximately a kilometer of ready-to-use fiber.

“At the end of the day, you don’t want a diva fiber. You want a fiber that, when you are working with it, falls into the ensemble of materials — one that you can work with just like any other fiber material, but then it has a lot of exciting new capabilities,” Forman says.

Creating such a fiber took a great deal of trial and error, as well as the collaboration of researchers with expertise in many disciplines, from chemistry to mechanical engineering to electronics to design.

The resulting fiber, called FibeRobo, can contract up to 40 percent without bending, actuate at skin-safe temperatures (the skin-safe version of the fiber contracts up to about 25 percent), and be produced with a low-cost setup for 20 cents per meter, which is about 60 times cheaper than commercially available shape-changing fibers.

The fiber can be incorporated into industrial sewing and knitting machines, as well as nonindustrial processes like hand looms or manual crocheting, without the need for any process modifications.
The MIT researchers used FibeRobo to demonstrate several applications, including an adaptive sports bra made by embroidery that tightens when the user begins exercising.

They also used an industrial knitting machine to create a compression jacket for Forman’s dog, whose name is Professor. The jacket would actuate and “hug” the dog based on a Bluetooth signal from Forman’s smartphone. Compression jackets are commonly used to alleviate the separation anxiety a dog can feel while its owner is away.

In the future, the researchers want to adjust the fiber’s chemical components so it can be recyclable or biodegradable. They also want to streamline the polymer synthesis process so users without wet lab expertise could make it on their own.

Forman is excited to see the FibeRobo applications other research groups identify as they build on these early results. In the long run, he hopes FibeRobo can become something a maker could buy in a craft store, just like a ball of yarn, and use to easily produce morphing fabrics.

“LCE fibers come to life when integrated into functional textiles. It is particularly fascinating to observe how the authors have explored creative textile designs using a variety of weaving and knitting patterns,” says Lining Yao, the Cooper-Siegel Associate Professor of Human Computer Interaction at Carnegie Mellon University, who was not involved with this work.

This research was supported, in part, by the William Asbjornsen Albert Memorial Fellowship, the Dr. Martin Luther King Jr. Visiting Professor Program, Toppan Printing Co., Honda Research, Chinese Scholarship Council, and Shima Seiki. The team included Ozgun Kilic Afsar, Sarah Nicita, Rosalie (Hsin-Ju) Lin, Liu Yang, Akshay Kothakonda, Zachary Gordon, and Cedric Honnet at MIT; and Megan Hofmann and Kristen Dorsey at Northeastern University.

Source:

MIT and Northeastern University

From MIT to Burning Man: The Living Knitwork Pavilion Credit Irmandy Wicaksono
24.10.2023

From MIT to Burning Man: The Living Knitwork Pavilion

Set against the vast and surreal backdrop of the Black Rock Desert in Nevada, Burning Man is an annual gathering that transforms the flat, barren expanse into a vibrant playground for artistic and creative expression. Here, "Burners" come to both witness and contribute to the ephemeral Black Rock City, which participants build anew each year. With its myriad art installations and performances, Black Rock City is a temporary home for creative minds from around the world.

Set against the vast and surreal backdrop of the Black Rock Desert in Nevada, Burning Man is an annual gathering that transforms the flat, barren expanse into a vibrant playground for artistic and creative expression. Here, "Burners" come to both witness and contribute to the ephemeral Black Rock City, which participants build anew each year. With its myriad art installations and performances, Black Rock City is a temporary home for creative minds from around the world.

This year among the large-scale art stood the Living Knitwork Pavilion, an unusual architectural piece crafted from knitted textiles and a lattice network of wood. Developed and built by a team of researchers from the MIT Media Lab and MIT School of Architecture and Planning, and led by PhD student Irmandy Wicaksono, the installation received a 2023 Black Rock City Honorarium. For the team, it was a highly challenging and fulfilling project, full of learning and surprises. Seeing it emerge and illuminate in the middle of the desert was truly magical.

In the Living Knitwork Pavilion, 12 modular fabric panels, known as Knitwork petals, are connected through a central tower. The whole installation stood as a dodecagonal pyramid shade structure, 18 feet tall and 26 feet wide, resembling a teepee. The fabrics were developed using digital machine knitting and a collection of functional and common yarns, including photochromic, luminous, and conductive yarns. Taking inspiration from the intricacy of textile patterns and temple carvings of Indonesia, Wicaksono leveraged the tension between knitted polyester and spandex yarns to create textural textile patterns or reliefs. The fusion of parametric and hand-designed motifs transforms the "Living Knitwork" into a narrative artwork, reflecting both a reverence for ancient artistry and a vision of the future. These reliefs, full of symbols and illustrations, depict 12 stories of the future — from solarpunk cities and bio-machine interfaces to the deep ocean and space exploration.

Burning Man and the Black Rock Desert are famed for their climbing enthusiasts and intense winds. Given that strong winds can make the fabrics behave like sails, exerting significant force, the team designed a structure capable of supporting the weight of many climbers, and withstanding wind speeds of up to 70 mph.

The finalized central structure of the pavilion consists of an asymptotic lattice network of lumber and joint elements, optimized for structural integrity while minimizing material use. The knitwork petals, integrated with double-knit structure and mesh openings, and thermoformed through melting yarns, maintain structural stability. Tailored channels for ropes and cables were also incorporated into the knitting design, ensuring each fabric and electrical component is securely anchored and protected, without compromising visual elegance. Facing winds that reached 36 mph this year, the Living Knitwork Pavilion remained steadfast throughout the Burning Man event, demonstrating its resilience in extreme desert conditions.

In support of Burning Man's push for more sustainable art, the Living Knitwork Pavilion utilized additive manufacturing of digital knitting. This method allowed for the creation of custom multi-layer textiles that are both aesthetic and functional, all while minimizing raw material use and waste. The team incorporated recycled materials in their fabrics, with 60 percent of the yarns coming from recycled plastic bottles. The pavilion also runs entirely on battery power and solar cells. The team worked together with the Solar Library, a sculptural solar panel that distributes energy to other arts on the playa, to eliminate generators and noise while promoting the use of renewable energy sources.

By day, the Living Knitwork Pavilion served as a shade structure, while providing a communal space for meditation and discovery. As the sun shifts through the day, hidden-encrypted textile patterns and visual experience are revealed through photochromism and luminescent glow. As dusk descended upon the desert, the pavilion underwent a metamorphosis, illuminating its surroundings through an immersive lighting and audio system. Through a distributed network of antennas embedded within the central structure and each knitwork petal, the team’s ultimate goal was to create an intimate experience that allows individual and collective movement and activity to influence the overall ambience of the space, involving sound and illumination.

Throughout Burning Man, the pavilion also hosted pop-up events, from yoga sessions, dance performances, live music, and even a wedding ceremony. Unfortunately, in the last two days of the event, a heavy rainstorm hit the Black Rock Desert — a rarity for the event. Yet, this climatic twist worked in favor of the pavilion, helping cleanse its textile surface from the accumulated dust and reviving its vivid blue color.

The result of this grand project is a collaboration that transcends disciplinary boundaries. The research team aims to exemplify the remarkable possibilities that arise when architecture, technology, and textile arts converge and bring communities together.

The interdisciplinary group behind the Living Knitwork Pavilion includes researchers from across the Media Lab, the MIT Center for Bits and Atoms, and the Department of Architecture: Irmandy Wicaksono, Sam Chin, Alfonso Parra Rubio, Nicole Bakker, Erik Strand, Gabriela Advincula, Manaswi Mishra, Age van der Mei, Judyta Cichoka, Tongge Yu, and Angelica Zhang.

Source:

Massachusetts Institute of Technology MIT News

A quick check with a smartphone, and the integrated spectrum analyzer recognizes the fabric the garment is made from. Photo: © Fraunhofer IPMS. A quick check with a smartphone, and the integrated spectrum analyzer recognizes the fabric the garment is made from.
10.10.2023

Checking clothing using a smartphone, AI and infrared spectroscopy

Researchers at Fraunhofer have developed an ultra-compact near-infrared spectrometer suitable for recognizing and analyzing textiles. Mixed fabrics can also be reliably identified through the combination of imaging, special AI (artificial intelligence) algorithms and spectroscopy. The technology could be used to optimize recycling old clothing, so old apparel could be sorted according to type. A highly miniaturized version of the system can even fit into a smartphone. This could lead to a host of new applications for end-users in everyday life — from checking clothes when out shopping to detecting counterfeits.

Researchers at Fraunhofer have developed an ultra-compact near-infrared spectrometer suitable for recognizing and analyzing textiles. Mixed fabrics can also be reliably identified through the combination of imaging, special AI (artificial intelligence) algorithms and spectroscopy. The technology could be used to optimize recycling old clothing, so old apparel could be sorted according to type. A highly miniaturized version of the system can even fit into a smartphone. This could lead to a host of new applications for end-users in everyday life — from checking clothes when out shopping to detecting counterfeits.

Infrared spectrometers are powerful measuring instruments when it comes to non-destructive analysis of organic materials. The Fraunhofer Institute for Photonic Microsystems IPMS in Dresden has recently developed a spectral analyzer system that recognizes and analyzes textile fabrics. The system can also reliably recognize mixed fabrics. Possible applications range from checking fabrics when out shopping to cleaning garments correctly, and even sustainable, sorted recycling. The spectrometer is so tiny, it can be integrated into a smartphone.

Researchers at Fraunhofer rely on near-infrared (NIR) spectroscopy to achieve the required reliability and accuracy when identifying textiles. The system works for wavelengths between 950 and 1900 nanometers, which is close to the visible spectrum. Advantages of near-infrared technology include being easy to use and having a wide range of applications. “We combine NIR spectroscopy with imaging and AI to achieve higher accuracy when recognizing and analyzing objects,” explains Dr. Heinrich Grüger, research scientist in the Sensoric Micromodules department at Fraunhofer IPMS.

How textile analysis works
Firstly, a conventional camera module captures an image of the garment. The AI selects a specific point from the fabric’s image data to be examined by the spectral analyzer module. Light reflected from the fabric is captured by the spectrometer module. There, it passes through an entrance slit, is transformed into parallel light beams using a collimating mirror and projected onto a grating using a scanning mirror. Depending on the angle of incidence and exit, the grating splits the light beams into different wavelengths. Light reflected from the grating is directed by the scanner mirror to a detector which captures the light as an electrical signal. An A/D converter then digitizes these signals, which are subsequently analyzed in the signal processor. The resulting spectrometric profile for the textile fabric reveals which fibers it is made from by comparing to a reference database.“ The optical resolution is 10 nanometers. This high resolution means the NIR spectrometer can also use AI to identify mixed fabrics such as items of clothing made from polyester and cotton,” says Grüger. Measuring just 10 mm × 10 mm and being 6.5 mm thick, the system is so compact it could easily be integrated into a standard smartphone.

Recycling old clothing
Grüger sees an important application for the AI-controlled spectrometer when it comes to recycling. According to the Federal Statistical Office of Germany, approximately 176,200 tons of textile and clothing waste was collected from private homes in Germany in 2021. NIR spectroscopy could improve recycling efficiency and reduce the mountain of old clothing. This would enable companies that recycle old clothing to sort it more efficiently and faster. Textiles that are still in one piece, for instance, go to the second-hand trade. Damaged textiles are sorted for recycling, and the fibers they are made from, such as linen, silk, cotton or lyocell, can be reused. Severely soiled textiles would be incinerated or processed into insulation mats, for example. Spectroscopic identifies and sorts textiles more accurately and much faster than a human can.

If NIR spectroscopy was to be integrated into a smartphone, end-users might also benefit from the Fraunhofer institute’s technology. When buying clothes, a quick check with a smartphone reveals whether that expensive silk scarf is genuinely made from silk, or whether that exclusive dress from the fashion label is not instead a counterfeit, exposed through an alternative mix of fabrics. And should the label with the cleaning instructions no longer be legible, the smartphone has a textile scanner to identify the fabric and so determine the appropriate wash cycle.

Food check and dermatology
Researchers at Fraunhofer IPMS can even envisage applications beyond the textile industry. Smartphones fitted with spectrometers might be used to provide information about the quality of groceries such as fruit and vegetables when out shopping. The technology might conceivably also be used to examine skin. A quick scan with the cell phone spectrometer could identify particularly dry or greasy patches. Perhaps applications in medical diagnostics might even be conceivable — examining patches of skin where a melanoma is suspected, for example — but this would need professional involvement too.

Source:

Fraunhofer Institute for Photonic Microsystems

TiHive Wins RISE® Innovation Award for their SAPMonit Technology Photo INDA
03.10.2023

TiHive Wins RISE® Innovation Award for their SAPMonit Technology

Business leaders, product developers, and technology scouts convened at the RISE® (Research, Innovation & Science for Engineered Fabrics) Conference, Sept. 26-27, Raleigh, NC for two days of valuable insights in material science, process and sustainability innovations. RISE is co-organized by INDA and The Nonwovens Institute, North Carolina State University.

Industry, academic, and government experts shared their expertise in these key areas:

Business leaders, product developers, and technology scouts convened at the RISE® (Research, Innovation & Science for Engineered Fabrics) Conference, Sept. 26-27, Raleigh, NC for two days of valuable insights in material science, process and sustainability innovations. RISE is co-organized by INDA and The Nonwovens Institute, North Carolina State University.

Industry, academic, and government experts shared their expertise in these key areas:

  • The future of nonwoven manufacturing
  • Real-world applications and advances in filter media
  • rPolymers and sustainability
  • Innovative strategies and circular solutions
  • Advancements in sustainable nonwoven applications
  • Market statistics and data trends

A highlight of RISE was a poster presentation of fundamental nonwovens research by The Nonwovens Institute’s graduate students. As an added value, The Nonwovens Institute offered RISE participants a tour of its world-class facilities located on the Centennial Campus of North Carolina State University, featuring the most extensive set of lab- and pilot-scale equipment found anywhere including all the nonwovens platform and testing technologies.

RISE® Innovation Award Winner
TiHive won the 2023 RISE Innovation Award for their SAPMonit technology. TiHive’s innovation, SAPMonit – a technology breakthrough, inspects millions of diapers weekly. SAPMonit delivers lightning-speed inline inspection of superabsorbents’ weight and distribution, optimizes resources, detects flaws, and accelerates R&D. SAPMonit utilizes advanced see-through cameras, high-speed vision algorithms, and secure cloud integration, revolutionizing industry norms. SAPMonit has great potential for sustainability, cost reduction, and enhanced customer satisfaction as it avoids hundreds of tons of plastic waste per year per machine.

The RISE Innovation Award finalists included Curt. G. Joa, Inc. for their ESC-8 – The JOA® Electronic Size Change, Fiberpartner Aps for their BicoBio Fiber, and Reifenhäuser REICOFIL GmbH & Co. KG for their Reifenhäuser Reicofil RF5 XHL.  Together, these finalists’ innovations have the potential to reduce plastic waste by millions of kgs.

DiaperRecycle won the 2022 RISE® Innovation Award for its innovative technology to recycle used diapers into absorbent and flushable cat litter. By diverting used diapers from households and institutions, and separating the plastic and fiber, DiaperRecycle strives to decrease the climate-changing emissions of diapers from landfills.

2023 INDA Lifetime Technical Achievement Award
Ed Thomas, President, Nonwoven Technology Associates, LLC, received the 2023 INDA Lifetime Technical Achievement Award for his decades of nonwoven contributions to the growth and success of the nonwoven industry.

RISE 2024 will be held October 1-2, 2024 at the James B. Hunt Jr. Library at North Carolina State University in Raleigh, NC.

More information:
INDA RISE® nonwovens
Source:

INDA

Carbon U Profil (c) vombaur GmbH & Co. KG
19.09.2023

"After all, a spaceship is not made off the peg."

Interview with vombaur - pioneers in special textiles
Technical narrow textiles, custom solutions, medium-sized textile producer and development partner for filtration textiles, composite textiles and industrial textiles: vombaur. Digitalisation, sustainability, energy prices, pioneering work and unbroken enthusiasm – Textination spoke to two passionate textile professionals: Carl Mrusek, Chief Sales Officer (CSO), and Johannes Kauschinger, Sales Manager for Composites and Industrial Textiles, at vombaur GmbH, which, as well as JUMBO-Textil, belongs to the Textation Group.
 

Interview with vombaur - pioneers in special textiles
Technical narrow textiles, custom solutions, medium-sized textile producer and development partner for filtration textiles, composite textiles and industrial textiles: vombaur. Digitalisation, sustainability, energy prices, pioneering work and unbroken enthusiasm – Textination spoke to two passionate textile professionals: Carl Mrusek, Chief Sales Officer (CSO), and Johannes Kauschinger, Sales Manager for Composites and Industrial Textiles, at vombaur GmbH, which, as well as JUMBO-Textil, belongs to the Textation Group.
 
If you look back at your history and thus to the beginnings of the 19th century, you will see a ribbon manufactory and, from 1855, a production of silk and hat bands. Today you produce filtration textiles, industrial textiles and composites textiles. Although you still produce narrow textiles today, the motto "Transformation as an opportunity" seems to be a lived reality at vombaur.
 
Carl Mrusek, Chief Sales Officer: Yes, vombaur has changed a few times in its almost 220-year history.  Yet the company has always remained true to itself as a narrow textiles manufacturer. This testifies to the willingness of the people in the company to change and to their curiosity. Successful transformation is a joint development, there is an opportunity in change. vombaur has proven this many times over the past almost 220 years: We have adapted our product portfolio to new times, we have built new factory buildings and new machinery, we have introduced new materials and developed new technologies, we have entered into new partnerships – as most recently as part of the Textation Group. We are currently planning our new headquarters. We are not reinventing ourselves, but we will go through a kind of transformation process with the move into the brand new, climate-friendly high-tech space.

 

Could you describe the challenges of this transformation process?
 
Johannes Kauschinger, Sales Manager for Composites and Industrial Textiles: A transformation usually takes place technically, professionally, organisationally and not least – perhaps even first and foremost – culturally. The technical challenges are obvious. Secondly, in order to manage and use the new technologies, appropriate expertise is needed in the company. Thirdly, every transformation entails new processes, teams and procedures have to be adapted. And finally, fourthly, the corporate culture also changes. Technology can be procured, expertise acquired, the organisation adapted. Time, on the other hand, cannot be bought. I therefore consider the greatest challenge to be the supply of human resources: In order to actively shape the transformation and not be driven by development, we need sufficient skilled workers.

 

Visiting your website, the claim "pioneering tech tex" immediately catches the eye. Why do you see your company as a pioneer, and what are vombaur's groundbreaking or pioneering innovations?

Carl Mrusek: With our unique machine park, we are pioneers for seamless circular woven textiles. And as a development partner, we break new ground with every order. We are always implementing new project-specific changes: to the end products, to the product properties, to the machines. It happens regularly that we adapt a weaving machine for a special seamless woven shaped textile, sometimes even develop a completely new one.
 
With our young, first-class and growing team for Development and Innovation led by Dr. Sven Schöfer, we repeatedly live up to our promise of "pioneering tech tex" by developing special textile high-tech solutions with and for our customers. At the same time, we actively explore new potentials. Most recently with sustainable materials for lightweight construction and research into novel special filtration solutions, for example for the filtration of microplastics. A state-of-the-art textile technology laboratory is planned for this team in the new building.

 

The development of technical textiles in Germany is a success story. From a global perspective, we manage to succeed with mass-produced goods only in exceptional cases. How do you assess the importance of technical textiles made in Germany for the success of other, especially highly technological industries?

Carl Mrusek: We see the future of industry in Europe in individually developed high-tech products. vombaur stands for high-quality, reliable and durable products and made-to-order products. And it is precisely this – custom-fit products, instead of surplus and throwaway goods – that is the future for sustainable business in general.

 

What proportion of your production is generated by being project-based as opposed to a standard range, and to what extent do you still feel comfortable with the term "textile producer"?

Johannes Kauschinger: Our share of special solutions amounts to almost 90 percent. We develop technical textile solutions for our customers' current projects. For this purpose, we are in close contact with the colleagues from our customers' product development departments. Especially in the field of composite textiles, special solutions are in demand. This can be a component for space travel – after all, a spaceship is not manufactured off the peg. We also offer high-quality mass-produced articles, for example in the area of industrial textiles, where we offer round woven tubulars for conveyor belts. In this sense, we are a textile producer, but more than that: we are also a textile developer.

 

In August, Composites Germany presented the results of its 21st market survey. The current business situation is viewed very critically, the investment climate is becoming gloomier and future expectations are turning negative. vombaur also has high-strength textile composites made of carbon, aramid, glass and hybrids in its portfolio. Do you share the assessment of the economic situation as reflected in the survey?

Carl Mrusek: We foresee a very positive development for vombaur because we develop in a very solution-oriented way and offer our customers genuine added value. This is because future technologies in particular require individual, reliable and lightweight components. This ranges from developments for the air taxi to wind turbines. Textiles are a predestined material for the future. The challenge here is also to offer sustainable and recyclable solutions with natural raw materials such as flax and recycled and recyclable plastics and effective separation technologies.

 

There is almost no company nowadays that does not use the current buzzwords such as climate neutrality, circular economy, energy efficiency and renewable energies. What is your company doing in these areas and how do you define the importance of these approaches for commercial success?

Carl Mrusek: vombaur pursues a comprehensive sustainability strategy. Based on the development of our mission statement, we are currently working on a sustainability declaration. Our responsibility for nature will be realised in a very concrete and measurable way through our new building with a green roof and solar system. In our product development, the high sustainability standards – our own and those of our customers – are already flowing into environmentally friendly and resource-saving products and into product developments for sustainable projects such as wind farms or filtration plants.

 

Keyword digitalisation: medium-sized businesses, to which vombaur belongs with its 85 employees, are often scolded for being too reluctant in this area. How would you respond to this accusation?

Johannes Kauschinger:

We often hear about the stack crisis at the present time. Based on this, we could speak of the stack transformation. We, the small and medium-sized enterprises, are transforming ourselves in a number of different dimensions at the same time: Digital transformation, climate neutrality, skilled labour market and population development, independence from the prevailing supply chains. We are capable of change and willing to change. Politics and administration could make it a bit easier for us in some aspects. Key words: transport infrastructure, approval times, energy prices. We do everything we can on our side of the field to ensure that small and medium-sized enterprises remain the driving economic force that they are.

 

 

How do you feel about the term shortage of skilled workers? Do you also take unconventional paths to find and retain talent and skilled workers in such a specialised industry? Or does the problem not arise?

Carl Mrusek: Of course, we are also experiencing a shortage of skilled workers, especially in the industrial sector. But the development was foreseeable. The topic played a major role in the decision to move together with our sister company JUMBO-Textil under the umbrella of the Textation Group. Recruiting and promoting young talent can be better mastered together – for example with cross-group campaigns and cooperations.

 

If you had to describe a central personal experience that has shaped your attitude towards the textile industry and its future, what would it be?

Johannes Kauschinger: A very good friend of my family pointed out to me that we live in an area with a very active textile industry, which at the same time has problems finding young talents. I visited two companies for an interview and already on the tour of each company, the interaction of people, machines and textiles up to the wearable end product was truly impressive. In addition, I was able to learn a profession with a very strong connection to everyday life. To this day, I am fascinated by the wide range of possible uses for textiles, especially in technical applications, and I have no regrets whatsoever about the decision I made back then.

Carl Mrusek: I came into contact with the world of textiles and fashion at a young age. I still remember the first time I went through the fully integrated textile production of a company in Nordhorn with my father Rolf Mrusek. Since then, the subject has never left me. Even before I started my studies, I had made a conscious decision to pursue a career in this industry and to this day I have never regretted it, on the contrary. The diversity of the special solutions developed in the Textation Group fascinates me again and again.

 

vombaur is a specialist for seamless round and shaped woven narrow textiles and is known throughout the industry as a development partner for filtration textiles, composite textiles and industrial textiles made of high-performance fibres. Technical narrow textiles from vombaur are used for filtration – in the food and chemical industries, among others. As high-performance composite materials, they are used, for example, in aircraft construction or medical technology. For technical applications, vombaur develops specially coated industrial textiles for insulation, reinforcement or transport in a wide range of industrial processes – from precision mechanics to the construction industry. The Wuppertal-based company was founded in 1805. The company currently employs 85 people.

Sectors

  • Aviation & Automotive
  • Sports & Outdoor   
  • Construction & Water Management
  • Safety & Protection   
  • Chemistry & Food
  • Plant construction & electronics   
  • Medicine & Orthopaedics

 

Heimtextil Trends 24/25 © SPOTT trends & business for Heimtextil
12.09.2023

Heimtextil Trends 24/25: New Sensitivity

Under the theme "New Sensitivity", textile transformation is the focus of Heimtextil Trends 24/25. Three approaches show ways to a more sensitive world of textiles: the plant-based production of textiles, the support of textile cycles by technology and the bioengineered use of natural ingredients. In addition, Future Materials curates regenerative materials and designs.
 
After last year's focus on circular solutions, Heimtextil Trends 24/25 will once again shed light on transformative textile innovations.
Under the title "New Sensitivity," the focus is on innovations and changes in the composition of textiles, in addition to aesthetic aspects. "In this context, sensitivity means considering the impact on the environment when making a decision or creating a product. Understanding how natural ecosystems work and prioritising balance as the default are key," says Anja Bisgaard Gaede, Founder of SPOTT trends & business.

Under the theme "New Sensitivity", textile transformation is the focus of Heimtextil Trends 24/25. Three approaches show ways to a more sensitive world of textiles: the plant-based production of textiles, the support of textile cycles by technology and the bioengineered use of natural ingredients. In addition, Future Materials curates regenerative materials and designs.
 
After last year's focus on circular solutions, Heimtextil Trends 24/25 will once again shed light on transformative textile innovations.
Under the title "New Sensitivity," the focus is on innovations and changes in the composition of textiles, in addition to aesthetic aspects. "In this context, sensitivity means considering the impact on the environment when making a decision or creating a product. Understanding how natural ecosystems work and prioritising balance as the default are key," says Anja Bisgaard Gaede, Founder of SPOTT trends & business.

How does New Sensitivity translate into something concrete in the lifestyle industry, and what does having a sensitive approach to design and products mean? Also the adoption of Artificial General Intelligence (AGI) is transforming current times. AGI has the potential to bring innovative solutions and help tackle significant challenges, also in the textile industry. However, AGI can have the opposite effect on society. AGI needs the mindset of New Sensitivity that helps simplify complexity, expand creativity, and find unseen solutions, also within the world of textiles.
     
"With Heimtextil Trends 24/25: New Sensitivity, we encourage the textile industry to approach the future with thoughtfulness and consideration. Specifically, we see this change in three different trends for a more sensitive world of textiles: biotechnical, plant-based and technological," Bisgaard Gaede continues.

Plant-based: textiles made from plant crops or plant by-products
Plant-based textiles mean that the fibres are derived from something that grows rather than being synthetically produced. The sustainable advantage of plant-based textiles is that their origin is natural and, therefore, more able to recirculate in existing ecosystems. They can be divided into two groups. The first group of textiles are made from plant crops. New resilient crops like cactus, hemp, abaca, seaweed, and rubber offer new sustainable textile solutions. Because of mechanical extraction, they can grow despite climate changes and require fewer chemicals in their development. The second group consists of textiles made of plant by-products which are leftover raw materials from production such as banana, olive, persimmon and hemp.

Technological: technology and technical solutions transforming textiles
Technology can support the transformation of textiles through the use of different methods: upcycling and recycling of textiles, textile construction, and textile design. Due to decades of production, textiles are now a material available in abundance. Developing technologies for recycling textile waste and methods for upcycling textiles increases the circular usage of existing textiles. Furthermore, old textile construction techniques also offer pathways to sustainable solutions: For instance, using knitting technology for furniture upholstery produces less fabric waste; alternatively, weaving technique allows the creation of several colours using only a few coloured yarns. Textile Design Thinking is another method that addresses critical issues such as energy usage and durability of natural fibres and enhances these through technological textile advancement.

Bio-engineered: engineered to enhance bio-degrading
To a certain degree, bio-engineered textiles represent a fusion of plant-based and technological textiles. Bio-engineering bridges nature and technology and transforms the way textiles are made. They can be divided into two directions: fully bio-engineered and bio-degradable textiles. In the production of fully bio-engineered textiles nature-inspired strategies are adopted. Instead of growing plants and extracting their fibres, textiles are made from the protein, carbohydrates, or bacteria in corn, grass, and cane sugar. Manufacturing involves a bio-molecular process that creates filaments which are made into yarn. The sustainable advantage of bio-engineered textiles is that they can have some of the same functionalities as synthetically produced textiles, while still being biodegradable because of their natural origin. Biodegradable fibres can be added to conventional textiles like polyester to enhance the conventional textiles’ ability to revert to materials found in nature and hence biodegrade in natural environments such as water or soil. Although not biodegrading completely, these bio-enhanced textiles will biodegrade up to 93 % compared to conventional textiles.

Heimtextil Trends 24/25: new colourways
A sensitive approach to colouring methods is expressed by a dynamic yet subtle colour palette created through natural pigments deriving from the earth, as traditional colouring processes are brought to the next level through innovative bioengineering technology. In pursuit of creating colours that evoke emotions in our senses while at the same time respecting our values in protecting the environment, we see colour bacteria growing pigments generating hues with great richness and depth.
               
This New Sensitivity includes acceptance of natural colour flows, as colours may fade with time or morph into new colourways. The colourways for Heimtextil Trends 24/25 were inspired by natural colours deriving from avocado seeds, algae, living bacteria, antique pigments such as raw sienna, and bio-engineered indigo and cochineal. The high black component in most colours allows for widespread application and a greater variety of combinations. The punchy saturated accents enhance our senses as they lift our spirits. In contrast, the grounding neutrals in different shades of grey, terra and even dark purple allow for calmness and tranquillity.

Future Materials: regenerative design
How are regenerative textiles and materials defined? Regenerative design is dedicated to developing holistic creative practices that restore or renew resources, have a positive impact on the environment, and encourage communities to thrive. For Heimtextil 2024, design futures consultancy FranklinTill is curating a global showcase of cutting-edge textiles and materials to illustrate the principles of regenerative design and recognize pioneering designers, producers and manufacturers who are at the forefront of regenerative design.
The Trend Space at Heimtextil in Frankfurt, Germany, January 9-12, 2023, will showcase these pioneering solutions in an inspiring way. In addition, Heimtextil Trends will offer visitors orientation and insights into the future of home and contract textiles in the form of workshops, lectures and other interactive formats.

Source:

Heimtextil, Messe Frankfurt

sportswear Stocksnap, Pixabay
30.08.2023

Detecting exhaustion with smart sportswear

Researchers at ETH Zurich have developed an electronic yarn capable of precisely measuring how a person’s body moves. Integrated directly into sportswear or work clothing, the textile sensor predicts the wearer’s exhaustion level during physical exertion.

Exhaustion makes us more prone to injury when we’re exercising or performing physical tasks. A group of ETH Zurich researchers led by Professor Carlo Menon, Head of the Biomedical and Mobile Health Technology Lab, have now developed a textile sensor that produces real-time measurements of how exhausted a person gets during physical exertion. To test their new sensor, they integrated it into a pair of athletic leggings. Simply by glancing at their smartphone, testers were able to see when they were reaching their limit and if they ought to take a break.

Researchers at ETH Zurich have developed an electronic yarn capable of precisely measuring how a person’s body moves. Integrated directly into sportswear or work clothing, the textile sensor predicts the wearer’s exhaustion level during physical exertion.

Exhaustion makes us more prone to injury when we’re exercising or performing physical tasks. A group of ETH Zurich researchers led by Professor Carlo Menon, Head of the Biomedical and Mobile Health Technology Lab, have now developed a textile sensor that produces real-time measurements of how exhausted a person gets during physical exertion. To test their new sensor, they integrated it into a pair of athletic leggings. Simply by glancing at their smartphone, testers were able to see when they were reaching their limit and if they ought to take a break.

This invention, for which ETH Zurich has filed a patent, could pave the way for a new generation of smart clothing: many of the products currently on the market have electronic components such as sensors, batteries or chips retrofitted to them. In addition to pushing up prices, this makes these articles difficult to manufacture and maintain.

By way of contrast, the ETH researchers’ stretchable sensor can be integrated directly into the material fibres of stretchy, close-fitting sportswear or work clothing. This makes large-scale production both easier and cheaper. Menon highlights another benefit: “Since the sensor is located so close to the body, we can capture body movements very precisely without the wearer even noticing.”

An extraordinary yarn
When people get tired, they move differently – and running is no exception: strides shorten and become less regular. Using their new sensor, which is made of a special type of yarn, the ETH researchers can measure this effect. It’s all thanks to the yarn’s structure: the inner fibre is made of a conductive, elastic rubber. The researchers wrapped a rigid wire, which is clad in a thin layer of plastic, into a spiral around this inner fibre. “These two fibres act as electrodes and create an electric field. Together, they form a capacitor that can hold an electric charge,” says Tyler Cuthbert, a postdoc in Menon’s group, who was instrumental in the research and development that led to the invention.

Smart running leggings
Stitching this yarn into the thigh section of a pair of stretchy running leggings means that it will stretch and slacken at a certain rhythm as the wearer runs. Each movement alters the gap between the two fibres, and thus also the electric field and the capacitor’s charge.

Under normal circumstances, these charge fluctuations would be much too small to help measure the body’s movements. However, the properties of this yarn are anything but normal: “Unlike most other materials, ours actually becomes thicker when stretched,” Cuthbert says. As a result, the yarn is considerably more sensitive to minimal movements. Stretching it even a little produces distinctly measurable fluctuations in the sensor’s charge. This makes it possible to measure and analyse even subtle changes in running form.

But how can this be used to determine a person’s exhaustion level? In previous research, Cuthbert and Menon observed a series of testers, who ran while wearing athletic leggings equipped with a similar sensor. They recorded how the electric signals changed as the runners got more and more tired. Their next step was to turn this pattern into a model capable of predicting runners’ exhaustion which can now be used for their novel textile sensor.  But ensuring that the model can make accurate predictions outside the lab will require a lot of additional tests and masses of gait pattern data.

Textile antenna for wireless data transfer  
To enable the textile sensor to send electrical signals wirelessly to a smartphone, the researchers equipped it with a loop antenna made of conducting yarn, which was also sewn directly onto the leggings. “Together, the sensor and antenna form an electrical circuit that is fully integrated into the item of clothing,” says Valeria Galli, a doctoral student in Menon’s group.

The electrical signal travels from the stretchable sensor to the antenna, which transmits it at a certain frequency capable of being read by a smartphone. The wearer runs and the sensor moves, creating a signal pattern with a continuously fluctuating frequency, which a smartphone app then records and evaluates in real time. But the researchers still have quite a bit of development work to do to make this happen.

Applications include sport and workplace
At the moment, the researchers are working on turning their prototype into a market-ready product. To this end, they are applying for one of ETH Zurich’s sought-after Pioneer Fellowships. “Our goal is to make the manufacture of smart clothing cost-effective and thus make it available to a broader public,” Menon says. He sees the potential applications stretching beyond sport to the workplace – to prevent exhaustion-related injuries – as well as to rehabilitation medicine.

BioKnit mycelium vault BioKnit mycelium vault © Hub or Biotechnology in the Built Environment
11.08.2023

Knitted futuristic eco-building designs using fungal networks

Scientists hoping to reduce the environmental impact of the construction industry have developed a way to grow building materials using knitted moulds and the root network of fungi.

Although researchers have experimented with similar composites before, the shape and growth constraints of the organic material have made it hard to develop diverse applications that fulfil its potential. Using the knitted molds as a flexible framework or ‘formwork’, the scientists created a composite called ‘mycocrete’ which is stronger and more versatile in terms of shape and form, allowing the scientists to grow lightweight and relatively eco-friendly construction materials.

Scientists hoping to reduce the environmental impact of the construction industry have developed a way to grow building materials using knitted moulds and the root network of fungi.

Although researchers have experimented with similar composites before, the shape and growth constraints of the organic material have made it hard to develop diverse applications that fulfil its potential. Using the knitted molds as a flexible framework or ‘formwork’, the scientists created a composite called ‘mycocrete’ which is stronger and more versatile in terms of shape and form, allowing the scientists to grow lightweight and relatively eco-friendly construction materials.

“Our ambition is to transform the look, feel and wellbeing of architectural spaces using mycelium in combination with biobased materials such as wool, sawdust and cellulose,” said Dr Jane Scott of Newcastle University, corresponding author of the paper in Frontiers in Bioengineering and Biotechnology. The research was carried out by a team of designers, engineers, and scientists in the Living Textiles Research Group, part of the Hub for Biotechnology in the Built Environment, a joint venture between Newcastle and Northumbria Universities which is funded by Research England.
 
Root networks
To make composites using mycelium, part of the root network of fungi, scientists mix mycelium spores with grains they can feed on and material that they can grow on. This mixture is packed into a mold and placed in a dark, humid, and warm environment so that the mycelium can grow, binding the substrate tightly together. Once it’s reached the right density, but before it starts to produce the fruiting bodies we call mushrooms, it is dried out. This process could provide a cheap, sustainable replacement for foam, timber, and plastic. But mycelium needs oxygen to grow, which constrains the size and shape of conventional rigid molds and limits current applications.
Knitted textiles offer a possible solution: oxygen-permeable molds that could change from flexible to stiff with the growth of the mycelium. But textiles can be too yielding, and it is difficult to pack the molds consistently. Scott and her colleagues set out to design a mycelium mixture and a production system that could exploit the potential of knitted forms.

“Knitting is an incredibly versatile 3D manufacturing system,” said Scott. “It is lightweight, flexible, and formable. The major advantage of knitting technology compared to other textile processes is the ability to knit 3D structures and forms with no seams and no waste.”

Samples of conventional mycelium composite were prepared by the scientists as controls, and grown alongside samples of mycocrete, which also contained paper powder, paper fiber clumps, water, glycerin, and xanthan gum. This paste was designed to be delivered into the knitted formwork with an injection gun to improve packing consistency: the paste needed to be liquid enough for the delivery system, but not so liquid that it failed to hold its shape.

Tubes for their planned test structure were knitted from merino yarn, sterilized, and fixed to a rigid structure while they were filled with the paste, so that changes in tension of the fabric would not affect the performance of the mycocrete.

Building the future
Once dried, samples were subjected to strength tests in tension, compression and flexion. The mycocrete samples proved to be stronger than the conventional mycelium composite samples and outperformed mycelium composites grown without knitted formwork. In addition, the porous knitted fabric of the formwork provided better oxygen availability, and the samples grown in it shrank less than most mycelium composite materials do when they are dried, suggesting more predictable and consistent manufacturing results could be achieved.
The team were also able to build a larger proof-of-concept prototype structure called BioKnit - a complex freestanding dome constructed in a single piece without joins that could prove to be weak points, thanks to the flexible knitted form.

“The mechanical performance of the mycocrete used in combination with permanent knitted formwork is a significant result, and a step towards the use of mycelium and textile biohybrids within construction,” said Scott. “In this paper we have specified particular yarns, substrates, and mycelium necessary to achieve a specific goal. However, there is extensive opportunity to adapt this formulation for different applications. Biofabricated architecture may require new machine technology to move textiles into the construction sector.”

 

Source:

Press release adapted with thanks to Frontiers in Bioengineering and Biotechnology

(c) NC State
07.08.2023

Wearable Connector Technology - Benefits to Military, Medicine and beyond

What comes to mind when you think about “wearable technology?” In 2023, likely a lot, at a time when smartwatches and rings measure heart rates, track exercise and even receive text messages. Your mind might even drift to that “ugly” light-up sweater or costume you saw last Halloween or holiday season.

At the Wilson College of Textiles, though, researchers are hard at work optimizing a truly new-age form of wearable technology that can be proven useful in a wide range of settings, from fashion and sports to augmented reality, the military and medicine.

Currently in its final stages, this grant-funded project could help protect users in critical situations, such as soldiers on the battlefield and patients in hospitals, while simultaneously pushing the boundaries of what textiles research can accomplish.

What comes to mind when you think about “wearable technology?” In 2023, likely a lot, at a time when smartwatches and rings measure heart rates, track exercise and even receive text messages. Your mind might even drift to that “ugly” light-up sweater or costume you saw last Halloween or holiday season.

At the Wilson College of Textiles, though, researchers are hard at work optimizing a truly new-age form of wearable technology that can be proven useful in a wide range of settings, from fashion and sports to augmented reality, the military and medicine.

Currently in its final stages, this grant-funded project could help protect users in critical situations, such as soldiers on the battlefield and patients in hospitals, while simultaneously pushing the boundaries of what textiles research can accomplish.

“The goals set for this research are quite novel to any other literature that exists on wearable connectors” says Shourya Dhatri Lingampally, Wilson College of Textiles graduate student and research assistant involved in the project alongside Wilson College Associate Professor Minyoung Suh.

Ongoing since the fall of 2021, Suh and Lingampally’s work focuses on textile-integrated wearable connectors, a unique, high-tech sort of “bridge” between flexible textiles and external electronic devices. At its essence, the project aims to improve these connectors’ Technology Readiness Level — a key rating used by NASA and the Department of Defense used to assess a particular technology’s maturity.

To do this, Lingampally and her colleagues’ research examines problems that have, in the past, affected the performance of wearable devices.

Sure, these advances may benefit fashion, leading to eccentric shirts, jackets, or accessories — “to light up or change its color based on the wearer’s biometric data,” Lingampally offers — the research has roots in a much deeper mission.

Potential benefits to military, medicine and beyond
The project is funded through more than $200,000 in grant money from Advanced Functional Fabrics of America (AFFOA), a United States Manufacturing Innovation Institute (MII) located in Cambridge, Massachusetts. The mission of AFFOA is to support domestic manufacturing capability to support new technical textile products, such as textile-based wearable technologies.

A key purpose of the research centers around improving the functionality of wearable monitoring devices with which soldiers are sometimes outfitted to monitor the health and safety of their troops remotely.

Similar devices allow doctors and other medical personnel to remotely monitor the health of patients even while away from the bedside.

Though such technology has existed for years, it’s too often required running wires and an overall logistically-unfriendly design. That could soon change.

“We have consolidated the electronic components into a small snap or buckle, making the circuits less obtrusive to the wearer,” Lingampally says, explaining the team’s innovations, which include 3D printing the connector prototypes using stereolithography technology.

“We are trying to optimize the design parameters in order to enhance the electrical and mechanical performance of these connectors,” she adds.

To accomplish their goals, the group collaborated with NC State Department of Electrical and Computer Engineering Assistant Research Professor James Dieffenderfer. The team routed a variety of electrical connections and interconnects like conductive thread, epoxy and solder through textile materials equipped with rigid electronic devices.

They also tested the components for compatibility with standard digital device connections like USB 2.0 and I2C.

Ultimately, Lingampally hopes their work will make wearable technology not only easier and more comfortable to use, but available at a lower price, too.

“I would like to see them scaled, to be mass manufactured, so they can be cost efficient for any industry to use,” she explains.

In a bigger-picture sense, though, her team’s work is reinforcing the far-reaching boundaries of what smart textile research can accomplish; a purpose that stretches far beyond fashion or comfort.

Pushing the boundaries of textiles research
Suh and Lingampally’s work is just the latest breakthrough research originating from the Wilson College of Textiles that’s aimed at solving critical problems in the textile industry and beyond.

“The constant advancements in technology and materials present immense potential for the textile industry to drive positive change across a range of fields from fashion to healthcare and beyond,” Lingampally, a graduate student in the M.S. Textiles program, says, noting the encouragement she feels in her program to pursue innovation and creativity in selecting and advancing her research.

Additionally, in the fiber and polymer science doctoral program, which Suh does research with, candidates focus their research on a seemingly endless array of STEM topics, ranging from forensics to medical textiles, nanotechnology and, indeed, smart wearable technology (just to name a few).

In this case, Suh says, the research lent itself to “unexpected challenges” that required intriguing adaptations “at every corner.” But, ultimately, it led to breakthroughs not previously seen in the wearable technology industry, attracting interest from other researchers outside the university, and private companies, too.

“This project was quite exploratory by nature as there hasn’t been any prior research aiming to the same objectives,” Suh says.

Meanwhile, the team has completed durability and reliability testing on its textile-integrated wearable connectors. Eventually, the group would like to increase the sample size for testing to strengthen and validate the findings. The team also hopes to evaluate new, innovative interconnective techniques, as well as other 3D printing techniques and materials as they work to further advance wearable technologies.

Source:

North Carolina State University, Sean Cudahy