Textination Newsline

Reset
4 results
LED Dress Fuses 3D Printing with Futuristic Fashion Photography by Natalie Cartz , Model Perpetua Sermsup Smith, Make-Up Artist Yaying Zheng
20.11.2023

LED Dress Fuses 3D Printing with Futuristic Fashion

  • Designer Anouk Wipprecht Collaborates with Chromatic 3D Materials for a Shining, Motion-Activated Display

Chromatic 3D Materials, a 3D-printing technology company, and high-tech Dutch fashion designer Anouk Wipprecht have unveiled a new futuristic 3D-printed dress that responds to its environment through LEDs. The motion-activated design is among the first garments in the world to directly embed electronics within 3D-printed elastomers. It highlights what the future of creative expression and social interaction may look like as humankind further integrates with technology. Wipprecht’s design was presented at Formnext, the 3D-printing event in Germany.

  • Designer Anouk Wipprecht Collaborates with Chromatic 3D Materials for a Shining, Motion-Activated Display

Chromatic 3D Materials, a 3D-printing technology company, and high-tech Dutch fashion designer Anouk Wipprecht have unveiled a new futuristic 3D-printed dress that responds to its environment through LEDs. The motion-activated design is among the first garments in the world to directly embed electronics within 3D-printed elastomers. It highlights what the future of creative expression and social interaction may look like as humankind further integrates with technology. Wipprecht’s design was presented at Formnext, the 3D-printing event in Germany.

Wipprecht’s avant-garde design highlights the potential of Chromatic’s 3D-printing technology and ChromaFlow 70™ material for commercial use. The designer used 3D printing to adhere nearly 75 flexible, 3D-printed LED domes to the fabric of the dress without adhesive or stitching. That capability could be used to create innovative running apparel, bags, footwear and other products including automotive and aerospace interiors, outdoor recreational equipment and personal protective equipment.  

The unique garment also demonstrates the flexibility of Chromatic’s materials. Unlike other 3D-printed materials, which tend to be brittle and hard, the dress features ChromaFlow 70™, a pliable, heat-resistant material that can drape and stretch more than four times its length without breaking. That flexibility makes it suitable for adding soft and seamless structural, functional and aesthetic elements that are useful for intimate and leisure apparel, sportswear, swimwear and other garments where comfort, silhouette and durability are crucial.

"Using Chromatic’s 3D materials to print offers numerous possibilities for the fashion industry. For designers like me, who incorporate electronics into our creations, it provides a unique opportunity of embedding and securing electronic parts within the printing process,“ says Anouk Wipprecht. “This is my most wearable — and washable — 3D-printed dress yet! As the electronics are enclosed, the material allows me to diffuse my LED lights, and the elastomer is both flexible and strong — making it excellent to bond to fabrics.”

“This collaboration is more than a partnership — it's a vision coming to life. By merging the genius of Anouk Wipprecht with our innovative 3D printing, we're setting the precedent for the future of fashion. We are embarking on a journey that amplifies the boundless integration of tech and art, opening doors for endless possibilities and applications in textiles and fashion,” said Cora Leibig, founder and CEO of Chromatic 3D Materials.

Source:

Chromatic 3D Materials

(c) DITF
20.12.2022

New 3D printing process for sustainable fiber composite components

Nature works often with fiber composites. The construction principles of nature require little material and energy and thus ensure the survival of animals and plant species. Examples include wood, plant stalks, chitinous shells, bones or tissues such as tendons and skin. Mussel shells or spider silk are also composite tissues. We can take advantage of these principles to design and manufacture bio-based, sustainable fiber reinforced composites, which are currently in high demand. Bio-based fiber reinforced composites consist of natural fibers or cellulose fibers embedded in a bio-based matrix. The bio-based components offer properties comparable to those of commonly used glass fiber composites. The German Institutes of Textile and Fiber Research (DITF), together with Arburg GmbH + Co KG, are developing an energy- and material-efficient 3D printing process for manufacturing of such lightweight bio-based fiber composites.

Nature works often with fiber composites. The construction principles of nature require little material and energy and thus ensure the survival of animals and plant species. Examples include wood, plant stalks, chitinous shells, bones or tissues such as tendons and skin. Mussel shells or spider silk are also composite tissues. We can take advantage of these principles to design and manufacture bio-based, sustainable fiber reinforced composites, which are currently in high demand. Bio-based fiber reinforced composites consist of natural fibers or cellulose fibers embedded in a bio-based matrix. The bio-based components offer properties comparable to those of commonly used glass fiber composites. The German Institutes of Textile and Fiber Research (DITF), together with Arburg GmbH + Co KG, are developing an energy- and material-efficient 3D printing process for manufacturing of such lightweight bio-based fiber composites.

In fiber composites, which occur naturally, reinforcing fibers such as collagen or cellulose fibrils are embedded in a matrix of lignin, hemicellulose or collagen. The fiber strands align with the stress patterns. Tissues are formed mostly via solution-based physio-chemical processes that take place at ambient temperature. Similar to nature, new 3D printing processes with continuous fiber reinforcement also allow the deposition of fiber strands in the right place (topology optimization) and in the appropriate direction in accordance to the load. However, natural fibers such as cellulose fibers are sensitive to higher temperatures. Therefore, they cannot be processed in the commonly employed thermoplastic 3D printing process.

The result of the research work is 3D-printed fiber composite components consisting of cellulose continuous fibers embedded in a cellulose-based matrix. Newly developed 3D-printing process enables to manufacture the composites at ambient temperature. This means that - as in nature - the material and component can be produced simultaneously in a single operation at ambient temperature.

The cellulose fiber strand is first stabilized with a binder for processing in the printer. The specially designed print head transforms the binder into a matrix with which the cellulose continuous fibers are encased. Since the cellulose fibers and the matrix have similar chemical structures, the composite component is particularly stable. The mechanical properties, such as breaking strength, are exceptionally good. The solution-based and energy-efficient manufacturing method developed by the research team can also be used in other composite materials manufacturing processes. It is particularly suitable for processing temperature-sensitive materials that are in high demand, such as natural or cellulose fibers.

The " CellLoes-3D-Druck" research project is funded by the German Federal Ministry of Education and Research as part of the "Biologisierung der Technik" ideas competition.

Source:

Deutsche Institute für Textil- und Faserforschung Denkendorf

Graphik: Pixabay
11.01.2022

FIMATEC innovation network enters second funding phase

The network for the development of fiber materials technology for healthcare and sports will receive funding from the Central Innovation Programme for SMEs (ZIM) for another two years.

The Federal Ministry for Economic Affairs and Climate Action (BMWi) approved a corresponding application in December 2021. This will continue to provide funding for the development of innovative functional fibers, smart textiles and application-optimized fiber composite materials until June 2023 and strengthen the technological competitiveness and innovative strength of small and medium-sized enterprises (SMEs).

The network for the development of fiber materials technology for healthcare and sports will receive funding from the Central Innovation Programme for SMEs (ZIM) for another two years.

The Federal Ministry for Economic Affairs and Climate Action (BMWi) approved a corresponding application in December 2021. This will continue to provide funding for the development of innovative functional fibers, smart textiles and application-optimized fiber composite materials until June 2023 and strengthen the technological competitiveness and innovative strength of small and medium-sized enterprises (SMEs).

For this purpose, the FIMATEC innovation network combines competences from different engineering and scientific disciplines with small and medium-sized manufacturers and service providers from the target sectors in medicine and sports (e.g. orthopaedics, prosthetics, surgery, smart textiles) as well as players from the textile and plastics industry.      

This interdisciplinary combination of industrial partners and application-oriented research institutions increases competitiveness and enables the players to realise their technical research and development projects quickly and in a targeted manner. The focus for the joint R&D projects of the companies and research institutions is on the development of innovative materials and efficient manufacturing technologies. 
          
Fiber-based materials have become indispensable in many applications in medicine and sports. As a pure fiber, processed into a textile or as a fiber composite plastic, they offer an almost unlimited variety for adjusting property and functional profiles. At the same time, the demands on the range of functions, performance and cost-effectiveness are constantly increasing, so that there is great potential for innovation. Developments are driven on the one hand by new materials and manufacturing processes, and on the other by innovative applications. Products with new and superior functions create a technological advantage over international competitors and enable higher sales revenues. In addition, efficient processes, application-optimized materials or even the integration of functions into the basic structure of textile materials lead to lower production costs and improved marketing opportunities in the future.
For developments in this context, the partners have joined forces in the FIMATEC innovation network, thus combining their expertise. Within the network, innovative materials and processes are being developed jointly in the following areas and tested in future-oriented products and services:

  • Functional fibers
    Innovative fiber materials with integrated functionalities
  • Preforming
    Highly load path optimized fiber orientations for complex fiber composite components.    
  • Smart Textiles
    Textile-based sensors and actuators
  • Hybrid material and manufacturing technologies
    Application-optimized components through cross-technology solution approaches.    
  • Fiber composites  
    Intelligent matrix systems and function-optimized fiber materials.    
  • Fiber-reinforced 3D printing  
    High-quality additive manufacturing processes for the efficient production of individualized products.

 
17 network partners are researching fiber-based materials for medical and sports technologyCurrently, ten companies and seven research institutions are involved in FIMATEC. Interested companies and research institutions as well as potential users can continue to participate in the cooperation network or R&D projects. In the course of membership, the partners are actively supported in identifying and initiating innovation projects as well as securing financing through funding acquisition. One application for ZIM project funding has already been approved by FIMATEC in its first year.

The aim of the already approved project "CFKadapt" is to develop a thermoformable fiber-plastic composite material for optimally adaptable orthopedic aids such as prostheses and orthoses. In the "Modul3Rad" project, which is currently being worked out in detail, the project partners intend to develop a modular lightweight frame system for the construction of user-friendly therapy tricycles, suitable for everyday use by severely and very severely disabled children. Three further collaborative projects are already in the planning stage.

The technology and knowledge transfer enables in particular small and medium-sized enterprises (SMEs) to access cutting-edge technological research, especially these are often denied access to innovations due to the lack of their own research departments. The IWS GmbH has taken over the network management for FIMATEC and supports the partners from the first idea to the search for suitable project partners and the preparation and coordination of funding applications. The aim is to obtain funding from the Central Innovation Programme for SMEs (ZIM), which offers companies funding opportunities for a wide range of technical innovation projects in cooperation with research institutions.

FIMATEC-netzwork partners
all ahead composites GmbH | Veitshöchheim | www.bike-ahead-composites.de
Altropol Kunststoff GmbH | Stockelsdorf | www.altropol.de
Diondo GmbH | Hattingen | www.diondo.com
Mailinger innovative fiber solutions GmbH | Sontra | www.mailinger.de
Sanitätshaus Manfred Klein GmbH & Co. KG | Stade | www.klein-sanitaetshaus.de
STREHL GmbH & Co KG | Bremervörde | www.rehastrehl.de
WESOM Textil GmbH | Olbersdorf | www.wesom-textil.de
Faserinstitut Bremen e.V. (FIBRE) | www.faserinstitut.de
E.F.M. GmbH | Olbersdorf | www.efm-gmbh.de
REHA-OT Lüneburg Melchior und Fittkau GmbH | Olbersdorf | www.rehaot.de
Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung IFAM | Bremen | www.ifam.fraunhofer.de
Leibniz-Institut für Polymerforschung Dresden e.V. (IPF) | www.ipfdd.de
Institut für Polymertechnologien Wismar e.V. (IPT) | www.ipt-wismar.de
Institut für Verbundwerkstoffe GmbH | Kaiserslautern | www.ivw.uni-kl.de

Associated network partners
9T Labs AG | Zürich, Schweiz | www.9tlabs.com
Fachhochschule Nordwestschweiz, Institut für Kunststofftechnik (FHNW) | www.fhnw.ch
KATZ - Kunststoff Ausbildungs- und Technologie-Zentrum | Aarau, Schweiz | www.katz.ch

Source:

Textination / IWS Innovations- und Wissensstrategien GmbH

Protective masks for Augsburg University Hospital (c) Fraunhofer IGCV
14.04.2020

Protective equipment from 3d printers

  • Fraunhofer IGCV supplies protective equipment made via 3d printers to university hospital Augsburg

For more than a week, the Institute for Materials Resource Management at the University of Augsburg has been supplying the University Hospital Augsburg with protective masks from 3D printers. In order to meet the enormous demand for absolutely necessary protective equipment for the the needs of hospital staff, a call for support was sent to cooperation partners - Augsburg University of Applied Sciences and Fraunhofer IGCV are stepping in.
 

  • Fraunhofer IGCV supplies protective equipment made via 3d printers to university hospital Augsburg

For more than a week, the Institute for Materials Resource Management at the University of Augsburg has been supplying the University Hospital Augsburg with protective masks from 3D printers. In order to meet the enormous demand for absolutely necessary protective equipment for the the needs of hospital staff, a call for support was sent to cooperation partners - Augsburg University of Applied Sciences and Fraunhofer IGCV are stepping in.
 

Fast communication in the research network:
Production of 3D-printed parts accelerates in the shortest possible time
Without further ado, an internal university group searched for possibilities of manufacturing via 3D printing. Prof. Dr. Markus Sause and Prof. Dr. Kay Weidenmann of the Institute for Materials Resource Management at the University of Augsburg immediately agreed and pulled out all the stops to start production as quickly as possible. In order to provide as many protective masks as possible in the shortest possible time, an appeal was also made to existing cooperation partners. They found what they were looking for in their direct colleague Prof. Dr. Johannes Schilp, Professor of Production Informatics at the University of Augsburg and Head of the Processing Technology Department at the Augsburg Fraunhofer IGCV: Max Horn, research associate at the Fraunhofer Institute, and Paul Dolezal from the FabLab (production laboratory) at Augsburg University of Applied Sciences immediately promised their help. "Thanks to the excellent cooperation of our team, the first parts were produced in our laboratory for additive manufacturing just a few hours after the first telephone call," Max Horn recalls. "With the support of the Augsburg University of Applied Sciences and the Fraunhofer IGCV, the production capacity of 50 masks per day could be significantly increased," Markus Sause is pleased to report.
          

Printing masks with Fused Deposition Modeling (FDM)
Fused Deposition Modeling (FDM) was selected as the manufacturing process for the face protection. This means that the mask is created by forcing fusible plastic through a nozzle and applying it in layers in individual lanes. In addition to an extensive laboratory for metal-based additive manufacturing, the Fraunhofer IGCV operates a new laboratory unit with various FDM printers. Due to the simplicity of the process and its great flexibility, it is particularly suitable for prototypes and sample components. "However, the masks produced are by no means only illustrative objects", adds Georg Schlick, Head of the Components and Processes Department at the Fraunhofer IGCV. The team processed durable polymers for the parts, which have good resistance to the disinfectants used in the hospital. This results in high-quality components that are ideally suited for multiple use.
 
Additive manufacturing for flexible production
In the meantime, some bottlenecks have been overcome: The Institute for Materials Resource Management at the University of Augsburg is switching back to production processes for the manufacture of face masks that are better suited for the production of large quantities. "The great strength of additive manufacturing lies rather in the production of very complex components with smaller quantities," explains Matthias Schmitt, group leader for additive manufacturing at the Fraunhofer IGCV. "But 3D printing also enables us to act at very short notice and to compensate for lack of capacity for almost any component as required," Schmitt continues. Thanks to the flexibility, motivation and expertise of all cooperation partners, a complete production and supply chain for the face masks was implemented within a few days. Georg Schlick therefore emphasizes the need for good networking and rapid exchange between the research institutions. "The close networking within the 3D printing community enables short communication channels and fast action. This can save lives in this case."

Source:

Fraunhofer Institute for Casting, Composite and Processing Technology IGCV