Textination Newsline

Reset
6 results
wind energy Photo: Carlos / Saigon - Vietnam, Pixabay
21.02.2024

Composites' hopes are pinned on wind energy and aviation sectors

Composites Germany - Results of the 22nd Composites Market Survey

  • Critical assessment of the current business situation
  • Future expectations brighten
  • Investment climate remains subdued
  • Different expectations of application industries
  • Growth drivers with slight shifts
  • Composites index points in different directions

For the 22nd time, Composites Germany has collected current key figures on the market for fiber-reinforced plastics. All member companies of the supporting associations of Composites Germany: AVK and Composites United as well as the associated partner VDMA were surveyed.
In order to ensure that the different surveys can be compared without any problems, no fundamental changes were made to the survey. Once again, mainly qualitative data was collected in relation to current and future market developments.

Composites Germany - Results of the 22nd Composites Market Survey

  • Critical assessment of the current business situation
  • Future expectations brighten
  • Investment climate remains subdued
  • Different expectations of application industries
  • Growth drivers with slight shifts
  • Composites index points in different directions

For the 22nd time, Composites Germany has collected current key figures on the market for fiber-reinforced plastics. All member companies of the supporting associations of Composites Germany: AVK and Composites United as well as the associated partner VDMA were surveyed.
In order to ensure that the different surveys can be compared without any problems, no fundamental changes were made to the survey. Once again, mainly qualitative data was collected in relation to current and future market developments.

Critical assessment of the current business situation
After consistently positive trends were seen in the assessment of the current business situation in 2021, this has slipped since 2022. There is still no sign of a trend reversal in the current survey. The reasons for the negative sentiment are manifold and were already evident in the last survey.

At present, politicians do not seem to be able to create a more positive environment for the industry with appropriate measures. Overall, Germany in particular, but also Europe, is currently experiencing a very difficult market environment.

However, the main drivers of the current difficult situation are likely to be the persistently high energy and commodity/raw material prices. In addition, there are still problems in individual areas of the logistics chains, for example on the main trade/container routes, as well as a cautious consumer climate. A slowdown in global trade and uncertainties in the political arena are currently fueling the negative mood in the market.

Despite rising registration figures, the automotive industry, the most important application area for composites, has not yet returned to its former volume. The construction industry, the second most important key area of application, is currently in crisis. Although the order books are still well filled, new orders are often failing to materialize. High interest rates and material costs coupled with the high cost of living are having a particularly negative impact on private construction, but public construction is also currently unable to achieve the targets it has set itself. According to the ZDB (Zentralverband Deutsches Baugewerbe), the forecasts in this important sector remain gloomy: "The decline in the construction industry is continuing. Turnover will fall by 5.3% in real terms this year and we expect a further 3% drop next year. Residential construction remains responsible for the decline, which will slump by 11% in real terms this year and continue its downward trajectory at -13% in 2024."

It is not only the assessment of the general business situation that remains pessimistic. The situation of their own companies also continues to be viewed critically. The picture is particularly negative for Germany. Almost 50% of respondents are critical of the current business situation in Germany. The view of global business and Europe is somewhat more positive. Here, "only" 40% and 35% of respondents respectively assess the situation rather negatively.

Future expectations brighten
Despite the generally rather subdued assessment of the business situation, many of those surveyed appear to be convinced that the mood is improving, at least in Europe. When asked about their assessment of future general business development, the values for Europe and the world are more optimistic than in the last survey. The survey participants do not currently expect the situation in Germany to improve.

Respondents were more optimistic about their own company's future expectations for Europe and the global market.

The participants seem to be assuming a moderate short to medium-term recovery of the global economy. The forecasts are more optimistic than the assessment of the current situation. It is striking that the view of the German region is more critical in relation to Europe and the global economy. 28% of those surveyed expect the general market situation in Germany to develop negatively. Only 13% expect the current situation to improve. The figures for Europe and the world are better.

Investment climate remains subdued
The current rather cautious assessment of the economic situation continues to have an impact on the investment climate.

While 22% of participants in the last survey still assumed an increase in personnel capacity (survey 1/2023 = 40%), this figure is currently only 18%. In contrast, 18% even expect a decrease in personnel.

The proportion of respondents planning to invest in machinery is also declining. While 56% of respondents in the last survey still expected to make such investments, this figure has now fallen to 46%.

Different expectations of application industries
The composites market is characterized by a high degree of heterogeneity in terms of both materials and applications. In the survey, the participants are asked to give their assessment of the market development of different core areas.

The expectations are extremely varied. The two most important application areas are the mobility and construction/infrastructure sectors. Both are currently undergoing major upheavals or are affected by declines, which is also clearly reflected in the survey. Growth is expected above all in the wind energy and aviation sectors.

Growth drivers with slight shifts
In terms of materials, there has been a change in the assessment of growth drivers. While the respondents in the last 9 surveys always named GRP as the material from which the main growth impetus for the composites sector is to be expected, the main impetus is now once again expected to come from CFRP or across all materials.

There is a slight regional shift. Germany is seen less strongly as a growth driver. In contrast, Europe (excluding Germany) and Asia are mentioned significantly more.

Composites index points in different directions
The numerous negative influences of recent times continue to be reflected in the overall Composites Index. This continues to fall, particularly when looking at the current business situation. On the other hand, there is a slight improvement in expectations for future market development, although this remains at a low level.

The total volume of processed composites in Europe in 2022 was already declining, and a further decline must also be expected for 2023. This is likely to be around 5% again.

It remains to be seen whether it will be possible to counteract the negative trend. Targeted intervention, including by political decision-makers, would be desirable here. However, this cannot succeed without industry/business. Only together will it be possible to maintain and strengthen Germany as a business/industry location. For composites as a material group in general, there are still very good opportunities to expand the market position in both new and existing markets due to the special portfolio of properties. However, the dependency on macroeconomic developments remains. It is now important to develop new market areas through innovation, to consistently exploit opportunities and to work together to further implement composites in existing markets. This can often be achieved better together than alone. With its excellent network, Composites Germany offers a wide range of opportunities.

The next composites market survey will be published in July 2024.

Source:

Composites Germany

DIGITALE PROZESSKETTE SICHERT ZUKUNFT DES LEICHTBAUS © Reed Exhibitions Deutschland GmbH
10.09.2019

DIGITAL PROCESS CHAIN SECURES THE FUTURE OF LIGHTWEIGHT CONSTRUCTION

  • At COMPOSITES EUROPE from 10 to 12 September
     
  • Incubator of ideas for multi-material lightweight construction
     
  • „Ultralight in Space“: Market study examines lightweight construction trends in aerospace

Whenever there’s movement, mass and weight quickly become destroyers of energy. From 10 to 12 September, the Lightweight Technologies Forum (LTF) at COMPOSITES EUROPE in Stuttgart will show how lightweight construction contributes to more efficient and better cars, airplanes and machines. The focus at the Forum will be on the commercially viable implementation of cross-material and holistic lightweight construction systems. The way to get there is through the digitalisation of the process chain.

  • At COMPOSITES EUROPE from 10 to 12 September
     
  • Incubator of ideas for multi-material lightweight construction
     
  • „Ultralight in Space“: Market study examines lightweight construction trends in aerospace

Whenever there’s movement, mass and weight quickly become destroyers of energy. From 10 to 12 September, the Lightweight Technologies Forum (LTF) at COMPOSITES EUROPE in Stuttgart will show how lightweight construction contributes to more efficient and better cars, airplanes and machines. The focus at the Forum will be on the commercially viable implementation of cross-material and holistic lightweight construction systems. The way to get there is through the digitalisation of the process chain.

From the idea to the component – that’s the path the Lightweight Technologies Forum aims to illuminate and support. To that end, the forum will gather current lightweight construction projects in Stuttgart, including from automotive engineering, aerospace and mechanical engineering – precisely those industries whose stringent material, safety and reliability demands make them idea generators for many other industries.
The commonality that runs through all the projects: a consistently digital process chain contributes significantly to the implementation of innovations. Another focus area is connecting and joining technology in multi-material lightweight construction.

"The Lightweight Technologies Forum is conceived as a cross-industry and cross-material incubator of ideas, a place where all stakeholders can consider new concepts. For that, we’re bringing successful flagship projects to Stuttgart”, says Olaf Freier, who on behalf of organiser Reed Exhibitions is responsible for the programme of the forum.

The growing significance of digitalisation and bionics
Support in putting together the forum programme comes from Automotive Management Consulting (AMC). The consulting company specialises in lightweight construction strategies, processes and structures in the automotive industry. “Lightweight construction requires comprehensive, systematic thinking”, says Rainer Kurek, the managing director of AMC. “The most important key factor, though, is the digitalisation of the process chain. Only virtual and simulation-driven design work can bring about competitive lightweight construction products, because they’re launched faster and ensure process safety while costing far less in development”, Kurek adds.

„Ultralight in Space“: Market study on lightweight construction trends in the aerospace industry
When it comes to ultra-lightweight construction, space travel has played a pioneering role since its inception, having driven many disciplines to new record performances. In cooperation with the Luxembourg-based aerospace suppliers GRADEL, AMC are currently conducting a market study to examine the latest technological trends. The results will be revealed at the LTF in Stuttgart on 10 September.
"Even though aerospace is a niche business: technical solutions that meet the stringent material demands here lead the way into the future, which in turn impacts other industries. That’s why it’s important to know the customer’s needs as well as the lightweight strategies, processes, structures and material decision-making of this market”, Rainer Kurek says assuredly.

Also underlining how important space travel is for the development of new technologies is Claude Maack, managing director of GRADEL: “All components are exposed to extreme conditions. Right from the launch of the rocket, they have to withstand enormous acceleration forces. In space, material must resist radiation exposure – and for many years. Then there are the high temperature differences from minus 185 to plus 200 degrees Celsius – alternating every couple of hours from one extreme to the other.“

The material question: Composites with biggest growth potential
Metals currently hold the largest market share among lightweight materials – but fibre-reinforced composites are said to have the biggest growth potential. More and more often they get to apply their strengths in lightweight construction. In the exhibition area, the LTF demonstrates how glass-fibre reinforced (GFRP) and carbon-fibre reinforced plastics (CFRP) play to their strengths in hybrid structural components.
On display, among other things, will be an ultra-lightweight seat by Automotive Management Consulting (AMC), Alba tooling & engineering and csi entwicklungstechnik GmbH, which was presented as a feasibility study – based on the lightweight construction innovation xFK in 3D – and virtual prototype at the 2018 LTF.

The innovative ultra-lightweight seat, which only weighs 10 kg, is based on a special winding process for fibre-composite components. The  “xFK in 3D process” uses a resin-impregnated continuous fibre from which components are wound and produced without waste to match the load. Conceivable uses for the concept seat include the so-called hypercars, sports cars and the air taxis of the future. Just a few weeks ago, the prototype was presented to the public and swiftly recognised with the German Innovation Award.

Exhibitors will be presenting additional lightweight construction solutions in the adjacent Lightweight Area. Some examples include structural components, semi-finished goods, technical textiles, adhesives and resins for automotive engineering and aerospace.

Altogether, visitors of the Lightweight Technologies Forum and COMPOSITES EUROPE will meet 300 exhibitors from 30 countries who will come to Stuttgart to showcase the entire process chain of fibre-reinforced plastics – from materials to machines for processing to concrete application examples from automotive engineering, aerospace, mechanical engineering, construction, wind power, and the sports and leisure sector. Besides new products, a special focus of the trade fair will be on advances in process technologies for large-scale series production.  
 

Composites Europe 2019 (c) Photos: Reed Exhibitions/ Oliver Wachenfeld
30.07.2019

COMPOSITES EUROPE 2019: Digital Process Chain makes Fibre Composites Competitive

  • Strong Triple: COMPOSITES EUROPE, International Composites Conference and Lightweight Technologies Forum
  • “Process live” special areas showcase technological progress
  • Co-located event: Foam Expo Europe

The composites industry provides important impetus – for lightweight construction and material innovations in automotive, aviation, mechanical engineering, construction, wind power as well as in the sports and leisure sectors. So in international competition it is solutions with a high degree of automation that are in demand. COMPOSITES EUROPE from 10 to 12 September will present the trends and advances in the production and processing of fibre-reinforced plastics in Stuttgart. The trade fair will be accompanied by the International Composites Conference and the Lightweight Technologies Forum. Also held in parallel at the Messe Stuttgart premises will be Foam Expo Europe.

  • Strong Triple: COMPOSITES EUROPE, International Composites Conference and Lightweight Technologies Forum
  • “Process live” special areas showcase technological progress
  • Co-located event: Foam Expo Europe

The composites industry provides important impetus – for lightweight construction and material innovations in automotive, aviation, mechanical engineering, construction, wind power as well as in the sports and leisure sectors. So in international competition it is solutions with a high degree of automation that are in demand. COMPOSITES EUROPE from 10 to 12 September will present the trends and advances in the production and processing of fibre-reinforced plastics in Stuttgart. The trade fair will be accompanied by the International Composites Conference and the Lightweight Technologies Forum. Also held in parallel at the Messe Stuttgart premises will be Foam Expo Europe.

Trade fair visitors will meet with over 300 exhibitors from 30 nations who will be displaying materials, technical solutions and innovative application examples in Stuttgart. Apart from novel products the trade fair will place special emphasis on innovative process engineering. Visitors will learn about the state of play in serial production and new applications in the composites industry in the exhibition area as well as on numerous special areas, on themed guided tours, at the accompanying International Composites Conference and at the Lightweight Technologies Forum, which is dedicated to the trends in multi-material lightweight construction.

“Process live”: Technologies in Synergy
Perfectly coordinated processing and manufacturing processes will be centre stage at the “Process live” event. On shared exhibition space machinery and equipment manufacturers will exhibit their technologies in concert and – what’s more – in operation so as to show the different individual processes in a real context.  

On display, to name but one exhibit, is VAP®, the Vacuum Assisted Process patented by Airbus, which will be in the limelight in the Trans-Textil and Composyst special area. This process permits the one-step production of large-surface and geometrically complex components without an autoclave, which is why it is particularly suitable for structural components in aviation, wind power, shipbuilding, in rail and road transport, in machinery and device manufacturing as well as in architecture and in the leisure industry.

The “Process live” special area care of cutting specialists GUNNAR from Switzerland specifically targets the DACH region (Germany, Austria, Switzerland) with its small and medium-sized companies. Jointly with laser projection expert LAP and composites engineering expert SCHEURER Swiss, GUNNAR introduces a connected overall process that fuses modern machinery and software with specialists’ manual jobs. The point of departure here is an automated manufacturing process for sorted layer placement in small and medium quantities involving a certain degree of skilled labour.

Fibre composite specialist Hacotech will present CNC-controlled cutting processes and various finishing possibilities in cooperation with Aristo Graphic Systeme and Lavesan. Alongside cutting, production preparation and customised sizing, the production of dimensionally correct templates and the cutting and custom-sizing of composite materials and prepregs will be on show.

Cutting technology is also centre stage in the special area of Rebstock Consulting, Broetje-Automation and Zünd Systemtechnik, which will be taking part in “Process live” with “Automated Sorting and Kitting”.

Composite producer Saertex and chemical company Scott Bader will demonstrate the RTM process for producing and curing a laminate that complies with the highest fire protection requirements in as little as 1 hour.   

5th International Composites Conference (ICC)
Serial production, stable processes, new markets – the International Composites Conference (ICC) is set to inject a fresh breeze for innovations into the market and to this end brings together processors and users of fibre-reinforced plastics from all over Europe. For the first time, this renowned Conference will be held in parallel with COMPOSITES EUROPE. The lecture programme put together by the trade association Composites Germany and the trade fair will also move closer in terms of content.  

One of tomorrow’s cross-cutting themes keeping the entire industry on its toes are multi-material solutions in nearly all industrial applications. In the construction sector the Conference also deals with the rising use of carbon concrete. Process engineering will focus on processing thermoplastic materials for serial production and stable processes for thermoset plastic processing.  

The partner country of the Conference is the United Kingdom. Especially against the backdrop of the current Brexit debate the ICC aims to foster exchange among all European countries. After all, the UK is among the biggest producers of composites components in Europe.

Themed Tours on Digitalisation, Fibre Glass, Thermoplastics, Automotive and Wind Power
Guided tours and hands-on demonstrations in the exhibition halls complement the conference programme. Themed guided tours revolving around composites application, materials and markets guide trade fair visitors and congress delegates right to the stands of selected exhibitors, who will share with visitors their innovations in the fields of digitalisation of composites production, automotive manufacturing, building and construction, fibreglass, new mobility, thermoplastic materials and wind power.  

New ideas on special areas and joint stands
“Material and Production Technology” is the name of the new special area set up under the guidance of the Institute of Plastics Processing (IKV) of the RWTH Aachen University. In cooperation with other institutes such as the Aachen Center for Integrative Lightweight Production (AZL) the IKV will place manufacturing technology centre stage at the trade fair. In particular, the special area will trace the path from scientific development to practical, industrial implementation.

Tomorrow’s automotive experts will also be given a separate forum: under the heading “Formula Student” students and trainees will present to visitors racing cars and bikes they have engineered.

Lightweight Technologies Forum: platform for multi-material lightweight construction
Lightweight construction remains a driver across the board for many developments in the composites sector. The Lightweight Technologies Forum (LTF) held as part of COMPOSITES EUROPE makes it clear how lightweight construction can be achieved in an economical and resource-efficient manner. This Forum views itself as a cross-industry and multi-material think tank where all parties involved can reflect on these new concepts.

To this end, the Forum in Stuttgart pools lightweight construction projects from automotive manufacturing, aviation and aerospace and mechanical engineering, to name but a few industries that serve as a driving force for many sectors with high demands made on materials, security and reliability.  

This year’s keynote speakers include Airbus Innovation Manager Peter Pirklbauer, lightweight construction expert Prof. Jörg Wellnitz (TU Ingolstadt), Dutch racing driver Jeroen Bleekemolen and lightweight construction, aviation and aerospace specialist Claus Georg Bayreuther (AMC). In their talks they will provide an overview of reference projects and novel manufacturing and joining technologies.  

Combining its own exhibition space with a lecture forum, the LTF demonstrates how glass-fibre reinforced plastics (GRP) and carbon fibre reinforced plastics (CFRP) leverage their strengths mixed with other materials in hybrid structural components. Exhibitors at the Forum and in the neighbouring Lightweight Area include “Leichtbau-Zentrum Sachsen” (Lightweight Construction Center Saxony), Chem-Trend, Gößl + Pfaff, Krempel, Mitsui Chemicals Europe, Leichtbau BW, the VDMA, Gustav Gerster, Potters Ballotini (UK), Yuho (Japan), Riba Composites (Italy) and Stamixco (Switzerland) as well as the journals Lightweight Design (Springer Fachmedien) and Automobil Industrie (Vogel Communications Group), to name but a few.

“Ultralight in Space”: market study on lightweight construction trends in the aerospace industry
The aerospace industry has always served as a pioneer for ultra-lightweight construction pushing many disciplines to their limits as a driver of innovation. The latest technical trends are currently under scrutiny via a market study carried out by consultancy Automotive Management Consulting (AMC) in cooperation with the Luxembourg-based aerospace OEM GRADEL. The results will be presented for the first time at the LTF in Stuttgart on 10 September.  

Presentation of the AVK Innovation Prize
Innovative products and applications in fibre-reinforced plastics, manufacturing processes and the latest insights from research and science, will again be recognised by the German trade association AVK – Industrievereinigung Verstärkte Kunststoffe e. V. with its renowned Innovation Prize. The winners will be announced as part of the trade fair on 10 September and the award-winning products and projects will be on display in a special area.

Presentation of the SMB-BMC Design Award
The European Alliance for SMC BMC will announce the winners of the SMC BMC Design Award 2019 – also on 10 September. The contest already held for the second time now, honours and promotes the design excellence of students or young design professionals who use SMC and BMC components (sheet and bulk moulding compounds) in their designs. This year saw sustainable mobility take centre stage as a theme.

COMPOSITES Night
The event to celebrate the midway point of the trade fair: the COMPOSITES Night at the end of the second trade fair day offers visitors and exhibitors additional opportunities for networking. Participants are in for buffets and live music at the Stage Palladium Theater in Stuttgart.

Matchmaking programme makes trade fair visit more efficient
Thanks to the complimentary networking & meeting platform “matchmaking” visitors and exhibitors can already reach out to contacts in the run-up to COMPOSITES EUROPE. Who is at the trade fair? Who has answers to your specific questions? Who can you team up with to turn new ideas into practice? The matchmaking platform allows you to “filter” and make direct appointments with potential cooperation partners by product category, industry, country, or company.

Career & Composites
With its career&composites stand COMPOSITES EUROPE targets students and graduates who can come here to establish contact with potential employers. On the special area the exhibitors present their companies to interested junior employees and attract attention to vacancies and career opportunities via a Job Wall.

Co-located with Foam Expo Europe
COMPOSITES EUROPE will be co-located with Foam Expo Europe for the first time. This trade fair covers the supply chain of technical foam production and presents moulded, rigid and soft foam solutions – from raw materials to equipment and machinery. The parallel exhibition dates generate special synergies for gaining an overview of lightweight construction materials for such shared applications as the automotive, aviation, construction and sports & leisure industries.

Show Preview COMPOSITES EUROPE 2018: Focus on process technologies (c) COMPOSITES EUROPE
09.10.2018

SHOW PREVIEW COMPOSITES EUROPE 2018: FOCUS ON PROCESS TECHNOLOGIES

  • Premiere: “Process live” format
  • Lightweight Technologies Forum to present hybrid lightweight construction
  • Trade fair kick-off event: International Composites Congress (ICC)

In the competition of lightweight construction and design materials, composites are among the winners – automotive engineering, aerospace, wind energy, boatbuilding and construction can no longer do without glass- and carbon-fibre reinforced plastics (GFRP & CFRP). Nevertheless, the greatest impetus right now is coming from the composites industry itself: technological advancements in the process chain. From 6 to 8 November, COMPOSITES EUROPE in Stuttgart will drive home that point.

  • Premiere: “Process live” format
  • Lightweight Technologies Forum to present hybrid lightweight construction
  • Trade fair kick-off event: International Composites Congress (ICC)

In the competition of lightweight construction and design materials, composites are among the winners – automotive engineering, aerospace, wind energy, boatbuilding and construction can no longer do without glass- and carbon-fibre reinforced plastics (GFRP & CFRP). Nevertheless, the greatest impetus right now is coming from the composites industry itself: technological advancements in the process chain. From 6 to 8 November, COMPOSITES EUROPE in Stuttgart will drive home that point.

Trade fair visitors will meet more than 350 exhibitors from 30 countries who in Stuttgart will present state-of-the-art technology and the potential of fibre-reinforced composites – in the exhibition area as well as in numerous event areas, lecture forums and themed tours.

With the new “Process live” format, coordinated processing and manufacturing processes will become the visible focus of this year’s COMPOSITES EUROPE. Mechanical and plant engineering companies will get together in group exhibits to showcase their technologies in live interactions – thus enabling visitors to experience sub-processes presented in a larger context.

Partnerships in the process chain accelerate growth in the industry
Among others, the cutting specialists Gunnar (Switzerland), the composites automation experts Airborne (Netherlands) and the gripping systems providers Schmalz (Germany) will join forces to create a combined production cell in a process-safe depiction of the entire value chain from roller materials to the finished layer structure of a composite component. In this setup, interlocking hardware components are fully connected with each other via software. “Cooperation among processors is getting closer and closer. These partnerships within the process chain are accelerating the growth of the composites industry; that’s what we want to show with the new ‘Process live’ format”, says Olaf Freier, event director of COMPOSITES EUROPE.

Lightweight Technologies Forum: Platform for multi-material lightweight construction
Besides the optimisation of the process chain, industry research today is heavily focused on the use of GFRP and CFRP in multi-material systems. The Lightweight Technologies Forum will once again demonstrate how composites play to their strengths alongside other materials in the material mix for hybrid structural components. A total of 16 exhibitors will present materials, tools and exhibits here – from fillers to bonding agents and presses for laminating different materials to semi-finished hybrid products.

In various presentations, experts will provide an overview of new products in manufacturing and joining technology as well as applications and lightweight engineering references from the automotive, aerospace and construction sectors. Support for the Lightweight Technologies Forum is provided by the German Federal Ministry for Economic Affairs and Energy.

From digitalisation to recycling: Know-how in the supporting programme
A presentation programme, themed tours and special areas complete the COMPOSITES EUROPE lineup. Manufacturing technology, recycling, digitalisation and thermoplastics will be central themes in the programme of the COMPOSITES Forum, which will also feature exhibitors presenting application examples from automotive engineering, aerospace, construction, mechanical engineering, wind energy and shipbuilding.

Themed guided tours, meanwhile, will lead visitors straight to the stands of selected exhibitors ready to explain the latest innovations in fibreglass, thermoplastics, automotive engineering, wind energy and construction.

Special areas and group stands to highlight new ideas
Hosting the special area “Industry meets Science”, the Institute of Plastics Processing (IKV), the leading European research institute for plastics technology based in Aachen, will showcase developments in process technology, design, quality assurance and repair.

The exhibitors at the “Bio-Based Composites Pavilion”, which will again be set up in cooperation with the nova-Institute, will reflect the development of the market for green composites. The focus will be on application options of wood-polymer composites (WPC), natural fibre composites (NFC), bio-based thermoplastics and thermosets for composites, and bio-based plastics.

Moreover, numerous young companies will thrill visitors with fresh ideas: the industry newcomers will present themselves at a group stand funded by the Federal Ministry for Economic Affairs and Energy (BMWi). They will cover a wide range of topics from semi-finished carbon-fibre products to metal foams to production lines for multi-material 3D fibre laminates.

Even the automotive experts of tomorrow will have their own forum at the trade fair: under the banner of “Formula Student”, students and apprentices will show visitors racecars they themselves have designed.

Kick-off event: 4th International Composites Congress (ICC)
The International Composites Congress (ICC) will once again kick off COMPOSITES EUROPE. In a series of presentations starting the day before the trade fair (5 and 6 November), international experts at the event with the headline topic “Composites – On the Path to Becoming a Key Industry?” will speak about and discuss applications, materials, process technologies and market prospects.

More information:
Composites Composites Europe
Source:

Reed Exhibitions Deutschland GmbH

Composites Europe © COMPOSITES EUROPE
05.09.2017

COMPOSITES EUROPE 2017: Lightweight automotive construction propels use of fibre-reinforced plastics

  • Market study “Lightweight Construction as Innovation Factor”: Presentation at COMPOSITES EUROPE
  • 21 September: Focus Day Automotive

No other industry has drawn more public attention to glass- and carbon-fibre reinforced plastics (GFRP/CFRP) than the automotive indus-
try. Next to the aerospace industry, it’s one of the innovation and growth drivers for composites. The great significance of composites for the automotive industry must be credited to the continuing lightweight construction trend. From 19 to 21 September, COMPOSITES EUROPE in Stuttgart will show how the composites industry can support automakers and their suppliers in this area. Programme highlights include the Focus Day Automotive and the Lightweight Technologies Forum.

  • Market study “Lightweight Construction as Innovation Factor”: Presentation at COMPOSITES EUROPE
  • 21 September: Focus Day Automotive

No other industry has drawn more public attention to glass- and carbon-fibre reinforced plastics (GFRP/CFRP) than the automotive indus-
try. Next to the aerospace industry, it’s one of the innovation and growth drivers for composites. The great significance of composites for the automotive industry must be credited to the continuing lightweight construction trend. From 19 to 21 September, COMPOSITES EUROPE in Stuttgart will show how the composites industry can support automakers and their suppliers in this area. Programme highlights include the Focus Day Automotive and the Lightweight Technologies Forum.

Presentation of the study “Lightweight Construction as Innovation Factor”
When it comes to composites in the automotive sector, modern lightweight construction is the No. 1 topic, according to industry expert Rainer Kurek, CEO of AUTOMOTIVE MANAGEMENT CONSULTING GmbH (AMC) from Penzberg near Munich. After all, he says, it comprises all the aspects of lightweight automotive construction – from concept, functions and joining technologies to materials. The training and consulting company specialises in auto-industry strategies, processes and structures; together with COMPOSITES EUROPE organiser Reed Exhibitions, they will, on 21 September, present the study “Lightweight Construction as Innovation Factor” (“Leichtbau als Innovationsfaktor” in the original German), which takes a holistic and detailed look at the issue. “Created in cooperation with Reed Exhibitions, the market study ‘Lightweight Construction as Innovation Factor’ synthesises the German automotive industry’s knowledge from nearly 150 years of experience”, explains Kurek. “Against the backdrop of increasing environmental and climate-protection requirements, a fragile energy supply and the resulting more stringent resource-conservation targets, it serves to sustainably enhance and strengthen Germany’s role as a centre of innovation.” The developer says he used to think in terms of materials first, but “design engineers today approach lightweight construction with an integrative mindset – with other joining and production technologies as well as with new materials. These days, the typical tasks we get from OEMs are almost always based on integrative lightweight construction.”
 
Positive Outlook
With about a third of the GFRP materials produced in Europe being used in the transport sector, innovations and the current development status of composites for the automotive market will be emphasised in the exhibition halls of COMPOSITES EUROPE 2017, as well. The future looks bright, according to Composites Germany’s latest market survey. No fewer than 46 per cent of responding companies expect this segment to grow. Only 15 per cent anticipate a downturn. The automotive industry isn’t just one of the biggest buyers of thermoplastic composites, it’s also a major purchaser of thermoset materials like SMC. Exhibitors such as Saint Gobain Performance Plastics, capricorn COMPOSITE, Lange+Ritter, SGL TECHNOLOGIES GmbH, ARKEMA France, Cevotec and EMS will be onsite to address the automotive industry’s composites requirements.

Theme day for “motorists”: Focus Day Automotive
What’s more, the entire third day of the trade fair – dubbed the Focus Day Automotive – will be dedicated to visitors predominantly interested in composites for the vehicle industry. A free one-hour guided tour at 11 am on 21 September, for example, will give visitors a comprehensive overview. Stops include the stands of industry-leading companies such as Evonik Industries, Huntsman, the Institute of Aircraft Design at the University of Stuttgart, PHP Fibers, Toho Tenax Europe and Vosschemie. Since the number of participants is limited, it would be advisable to register in a timely manner by visiting: www.composites-europe.com/guided-tours.

The subsequent Automotive Business Lunch taking place at the stand of sponsor Hexion (Hall C2, BO6) at 12 pm will provide an excellent networking opportunity. In addition, expert lectures at the COMPOSITES Forum in Hall 6, Stand B76, will cover automotive basics, trends and innovations. Admission is free of charge for trade fair visitors.
 
Hybrid lightweight construction: The best from different material worlds
Hybrid lightweight construction, which combines metallic materials with composites, is another trend in automotive engineering, as Kurek confirms. In his estimation, it’s imperative to intelligently leverage the strengths of each respective material. “We need to think very carefully about how the different materials can be used in line with the required strength.” Composites, for instance, are great at absorbing tensile forces, while metallic materials are better suited for compressive forces.” This is exactly the issue Kurek sees as COMPOSITES EUROPE’s most critical task: “Even with composites, we long ago moved from ‘either-or’ to ‘both’. Metallic materials have a right to exist just as composites do.”
That’s why the Lightweight Technologies Forum at COMPOSITES EUROPE will provide answers to questions revolving around lightweight construction with other materials like aluminium or steel. The combined exhibition and presentation forum featuring exhibitors such as Kunststoffwerk AG Buchs, Linn High Therm, Schütze, OCSiAL Group, Hexcel Composites and ar engineers will serve as the cross-material interface between metal and composite technologies in structural components.

Trade fair opening event: 3rd International Composites Congress (ICC)
Kicking off COMPOSITES EUROPE 2017 on 18 and 19 September 2017 will be the “3rd International Composites Congress (ICC)” hosted by the trade association Composites Germany in Stuttgart. Current trends, new applications and technologies, and a comprehensive overview of market developments in Europe and worldwide will be the centre of attention at the 3rd ICC. This year’s partner country, South Korea, will be represented with several exclusive speakers.

 

Wind energy plant © Timo Klostermeier / pixelio.de
11.10.2016

WIND POWER INDUSTRY AT COMPOSITES EUROPE 2016

Offshore expansion and onshore repowering ensure growth

  • Wind theme day with guided tour November 29th
  • Lectures about material trends

With an investment volume of EUR 14 billion in the offshore sector alone, the European wind power industry has set a new record high in the first half of 2016. This figure and the view on the still open approval procedures in this segment as well as the onshore upcoming generational change from existing to modern facilities (repowering) show that the potential for growth is far from being exploited. Also in America as well as in Asia and the Pacific area a new emerging wind energy sector is also driving demand for fiber composites. The COMPOSITES EUROPE exhibition will be showing in Dusseldorf from November 29th to December 1st 2016 the latest trends and developments.

Theme Day: Wind meets Composites

Offshore expansion and onshore repowering ensure growth

  • Wind theme day with guided tour November 29th
  • Lectures about material trends

With an investment volume of EUR 14 billion in the offshore sector alone, the European wind power industry has set a new record high in the first half of 2016. This figure and the view on the still open approval procedures in this segment as well as the onshore upcoming generational change from existing to modern facilities (repowering) show that the potential for growth is far from being exploited. Also in America as well as in Asia and the Pacific area a new emerging wind energy sector is also driving demand for fiber composites. The COMPOSITES EUROPE exhibition will be showing in Dusseldorf from November 29th to December 1st 2016 the latest trends and developments.

Theme Day: Wind meets Composites

Sector specialists such as Gaugler & Lutz, DD Compound, 3D Core, LAP and Power & Composite Technology will be showing current technologies at the COMPOSITES EUROPE, latest machine tools and manufacturing processes for the wind power industry. A highlight for all wind experts: On November 29th will be the theme day „Wind meets Composites" at the fair. This day will be sponsored by GUNNAR International, Weissenberger, Hexion and SAERTEX. Engineers of aerodynamics, materials science, lightweight construction and production technology will be able to exchange ideas with purchasers, exhibitors and wind energy specialists in the composite sector. The focus will be, among other things, on topics such as the influence of material selection, on design, weight, stability, processing or production processes as well as on certification, standardization and automation in rotor blade construction.
 
Guided theme walks

An optimal overview of exhibitors' offer on the topic wind is given to visitors by the opportunity of taking part at guided tours. Here they will specifically directed to various exhibitors from the wind segment, where they can get within 10 minutes information about their products and innovations. There will be two guided tours on November 29th: tour 1 will take place between 12:00 AM and 01.00 PM and tour 2 in the afternoon between 02:00 and 03:00 PM. Participating exhibitors include Airtech, GUNNAR International, Agilent Technologies, RH Cutting Technology, Granta Design, DD Compound and Armacell Benelux. The lecture is in English. Participation is free, but the number of participants is limited. Between the two round trips the participants have the opportunity to strengthen themselves at the "Wind Lunch" at the booth of Hexion (Hall 8a / booth G31).
Click here to register for the guided tours: www.composites-europe.com/guided-tours

 
Lectures at COMPOSITES Forum

On the afternoon of the wind theme day the COMPOSITES Forum provides an overview of the latest challenges in research, design, quality management, transportation and production of rotor blades. Starting at 3:00 PM Sinoi will discuss "Challenges and approaches in the construction of large onshore blades". Euros will hold a lecture on "Potentials and limits of composites in rotor blade construction" and the Fraunhofer Institute for Wind Energy and Energy System Technology will be presenting "Composite trends for wind turbine blades". Pontis Engineering also has a slot in the lecture program. From 04.00 PM it will be about "Challenges in design and manufacturing of large wind turbine blades". Access to the lecture area is free of charge for visitors. The COMPOSITES Forum is located in Hall 8, Booth B45.

Click here for a complete overview on the topic wind:
https://www.composites-europe.com/windenergie_527.html

About COMPOSITES EUROPE:
350 exhibitors from 30 countries will attend the COMPOSITES EUROPE, European Trade Fair and Forum for Composite Materials, Technology and Applications from November 29th to December 1st in Dusseldorf. The exhibition shows the entire range of fiber-reinforced plastics, from raw materials to manufacturing processes, to lightweight construction innovations in automotive engineering, aviation, boat building, wind power industry and construction. COMPOSITES EUROPE is organized by Reed Exhibitions in cooperation with the European sector association EuCIA and the economic association Composites Germany, a consortium of branch associations and clusters AVK, CCeV, CFK-Valley Stade and VDMA AG Hybrid Light Construction Technologies.