Textination Newsline

Reset
407 results
Photo: pixabay
15.02.2022

Advanced Fibers: When damaged ropes change color

High-performance fibres that have been exposed to high temperatures usually lose their mechanical properties undetected and, in the worst case, can tear precisely when lives depend on them. For example, safety ropes used by fire brigades or suspension ropes for heavy loads on construction sites. Empa researchers have now developed a coating that changes color when exposed to high temperatures through friction or fire.

The firefighter runs into the burning building and systematically searches room by room for people in need of rescue. Attached to him is a safety rope at the other end of which his colleagues are waiting outside in front of the building. In an emergency - should he lose consciousness for any reason - they can pull him out of the building or follow him into the building for rescue. However, if this rope has been exposed to excessive heat during previous operations, it may tear apart. This means danger to life!

High-performance fibres that have been exposed to high temperatures usually lose their mechanical properties undetected and, in the worst case, can tear precisely when lives depend on them. For example, safety ropes used by fire brigades or suspension ropes for heavy loads on construction sites. Empa researchers have now developed a coating that changes color when exposed to high temperatures through friction or fire.

The firefighter runs into the burning building and systematically searches room by room for people in need of rescue. Attached to him is a safety rope at the other end of which his colleagues are waiting outside in front of the building. In an emergency - should he lose consciousness for any reason - they can pull him out of the building or follow him into the building for rescue. However, if this rope has been exposed to excessive heat during previous operations, it may tear apart. This means danger to life!

And up to now there has been no way of noticing this damage to the rope. 2021 a team of researchers from Empa and ETH Zurich has developed a coating which changes color due to the physical reaction with heat, thus clearly indicating whether a rope will continue to provide the safety it promises in the future.

Researchers from ETH Zurich and Empa developed a coating system in 2018 as part of a Master's thesis, which the Empa team was now able to apply to fibers. "It was a process involving several steps," says Dirk Hegemann from Empa's Advances Fibers lab. The first coatings only worked on smooth surfaces, so the method first had to be adapted so that it would also work on curved surfaces. Empa has extensive know-how in the coating of fibers - Hegemann and his team have already developed electrically conductive fibers in the past. The so-called sputtering process has now also been successfully applied to the latest coating.

Three layers are required to ensure that the fiber actually changes color when heated. The researchers apply silver to the fibre itself, in this case PET (i.e. polyester) and VectranTM, a high-tech fibre. This serves as a reflector - in other words, as a metallic base layer. This is followed by an intermediate layer of titanium nitrogen oxide, which ensures that the silver remains stable. And only then follows the amorphous layer that causes the color change: Germanium-antimony tellurium (GST), which is just 20 nanometers thick. When this layer is exposed to elevated temperatures, it crystallizes, changing the color from blue to white. The colour change is based on a physical phenomenon known as interference. Two different waves (e.g. light) meet and amplify or weaken each other. Depending on the chemical composition of the temperature-sensitive layer, this color change can be adjusted to a temperature range between 100 and 400 degrees and thus adapted to the mechanical properties of the fiber type.

Tailor-made solutions
The possible areas of application for the colour-changing fibres are still open, and Hegemann is currently looking for possible project partners. In addition to safety equipment for firefighters or mountaineers, the fibres can also be used for load ropes in production facilities, on construction sites, etc. In any case, research on the subject is far from complete. At present, it is not yet possible to store the fibers for long periods of time without losing their functionality. "Unfortunately, the phase-change materials oxidize over the course of a few months," says Hegemann. This means that the corresponding phase change - crystallization - no longer takes place, even with heat, and the rope thus loses its "warning signal". In any case, it has been proven that the principle works, and durability is a topic for future research, says Hegemann. "As soon as the first partners from industry register their interest in our own products, the fibers can be further optimized according to their needs".

Information:
Dr. Dirk Hegemann
Advanced Fibers
Tel. +41 58 765 7268
Dirk.Hegemann@empa.ch

More information:
Empa Fibers Ropes temperature
Source:

EMPA, Andrea Six

(c) Empa
08.02.2022

Early detection of dementia with a textile belt

Alzheimer's and other dementias are among the most widespread diseases today. Diagnosis is complex and can often only be established with certainty late in the course of the disease. A team of Empa researchers, together with clinical partners, is now developing a new diagnostic tool that can detect the first signs of neurodegenerative changes using a sensor belt.

Forgetfulness and confusion can be signs of a currently incurable ailment: Alzheimer's disease. It is the most common form of dementia that currently affect around 50 million people worldwide. It mainly afflicts older people. The fact that this number will increase sharply in the future is therefore also related to the general increase in life expectancy.

Alzheimer's and other dementias are among the most widespread diseases today. Diagnosis is complex and can often only be established with certainty late in the course of the disease. A team of Empa researchers, together with clinical partners, is now developing a new diagnostic tool that can detect the first signs of neurodegenerative changes using a sensor belt.

Forgetfulness and confusion can be signs of a currently incurable ailment: Alzheimer's disease. It is the most common form of dementia that currently affect around 50 million people worldwide. It mainly afflicts older people. The fact that this number will increase sharply in the future is therefore also related to the general increase in life expectancy.

If dementia is suspected, neuropsychological examinations, laboratory tests and demanding procedures in the hospital are required. However, the first neurodegenerative changes in the brain occur decades before a reduced cognitive ability becomes apparent. Currently, these can only be detected by expensive or invasive procedures. These methods are thus not suitable for extensive early screenings on a larger scale. Empa researchers are working with partners from the Cantonal Hospital and the Geriatric Clinic in St. Gallen on a non-invasive diagnostic method that detects the early processes of dementia.

Signs in the unconscious
For the new method, the researchers Patrick Eggenberger and Simon Annaheim from Empa's Biomimetic Membranes and Textiles lab in St. Gallen relied on a sensor belt that has already been used successfully for ECG measurements and has now been equipped with sensors for other relevant parameters such as body temperature and gait pattern. This is because long before memory starts to deteriorate in dementia, subtle changes appear in the brain, which are expressed through unconscious bodily reactions.

These changes can only be recorded precisely when measurements are taken over a longer period of time, though. "It should be possible to integrate the long-term measurements into everyday life," explains Simon Annaheim. Skin-friendly and comfortable monitoring systems are essential for measurements that are suitable for everyday use. The diagnostic belt is therefore based on flexible sensors with electrically conductive or light-conducting fibers as well as sensors for motion and temperature measurement.

To enable such long-term measurements to be used for monitoring neurocognitive health, the researchers are integrating the collected data into in-house developed mathematical models. The goal: an early warning system that can estimate the progression of cognitive impairment. Another advantage is that the data measurements can be integrated into telemonitoring solutions and can thus improve patient care in their familiar environment.

Suspicious monotony
The human body is able to keep its temperature constant in a range of 1 degree Celsius. The values naturally oscillate in the course of the day. This daily rhythm changes with age and is conspicuous in neurodegenerative diseases such as dementia or Parkinson's disease. In Alzheimer's patients, for example, the core body temperature is elevated by up to 0.2 degrees Celsius. At the same time, the spikes in daily temperature fluctuations are dampened.

In a study, the researchers have now been able to show that altered skin temperature readings measured with the sensor belt actually provide an indication of the cognitive performance of test subjects – and can do so well before dementia develops. The test subjects in the study included healthy people with or without mild brain impairment. This mild cognitive impairment (MCI) does not represent a disability in everyday life, but it is considered a possible precursor to Alzheimer's disease. The subjects took part in long-term measurements and neuropsychological tests. It was found that a lower body temperature, which fluctuated more throughout the day, was linked to a better cognitive performance. In individuals with MCI, body temperature varied less and was slightly elevated overall.

The heartbeat is also subject to natural variations that show how our nervous system adapts to sudden challenges. The small silence between two heartbeats, about one second in duration, has great significance for our health: If this pause always remains the same, our nervous system is not at its best.

A study by researchers from ETH Zurich determined that poorer measurements in older, healthy people can be improved within six months through cognitive-motor dance training. In these "exergames," the test subjects imitated sequences of steps from a video. In contrast, participants who instead only trained in straight lines on a treadmill, but also trained their memory, benefited less.

"The point is to intervene early with appropriate training as soon as the first negative signs can be measured," says Patrick Eggenberger. "With our sensor system, any improvements in cognitive performance can be tracked through movement-based forms of therapy." Studies with long-term monitoring will now be used to clarify how the sensor measurements can be used to predict the progression of mild brain disorders.

Further information
Dr. Simon Annaheim
Biomimetic Membranes and Textiles   
Phone +41 58 765 77 68
Simon.Annaheim@empa.ch

More information:
Empa Membrane Medical & Healthcare
Source:

EMPA, Andrea Six

Photo: pixabay, Hilary Clark
01.02.2022

Cotton Fibers 2.0: Fireproof and comfortable

A new chemical process developed by Empa turns cotton into a fire-resistant fabric, that nevertheless retains the skin-friendly properties of cotton.

Conventional flame retardant cotton textiles suffer from release of formaldehyde and are uncomfortable to wear. Empa scientists managed to circumvent this problem by creating a physically and chemically independent network of flame retardants inside the fibers. This approach retains the inherently positive properties of cotton fibers, which account for three-quarters of the world's demand for natural fibers in clothing and home textiles. Cotton is skin-friendly because it can absorb considerable amounts of water and maintain a favorable microclimate on the skin.

A new chemical process developed by Empa turns cotton into a fire-resistant fabric, that nevertheless retains the skin-friendly properties of cotton.

Conventional flame retardant cotton textiles suffer from release of formaldehyde and are uncomfortable to wear. Empa scientists managed to circumvent this problem by creating a physically and chemically independent network of flame retardants inside the fibers. This approach retains the inherently positive properties of cotton fibers, which account for three-quarters of the world's demand for natural fibers in clothing and home textiles. Cotton is skin-friendly because it can absorb considerable amounts of water and maintain a favorable microclimate on the skin.

For firefighters and other emergency service personnel, protective clothing provides the most important barrier. For such purposes, cotton is mainly used as an inner textile layer that needs additional properties: For example, it must be fireproof or protect against biological contaminants. Nevertheless, it should not be hydrophobic, which would create an uncomfortable microclimate. These additional properties can be built into the cotton fibers by suitable chemical modifications.

Durability vs. toxicity
"Until now, it has always taken a compromise to make cotton fireproof," says Sabyasachi Gaan, a chemist and polymer expert who works at Empa's Advanced Fibers lab. Wash-durable flame retardant cotton in industry is produced by treating the fabric with flame retardants, which chemically links to the cellulose in the cotton. Currently, the textile industry has no other choice than to utilize formaldehyde-based chemicals – and formaldehyde is classified as a carcinogen. This has been an unsolved problem for decades. While formaldehyde-based flame retardant treatments are durable, they have additional drawbacks: The -OH groups of cellulose are chemically blocked, which considerably reduces the capability of cotton to absorb water, which results in an uncomfortable textile.

Gaan knows the chemistry of cotton fibers well and has spent many years at Empa developing flame retardants based on phosphorus chemistry that are already used in many industrial applications. Now he has succeeded in finding an elegant and easy way to anchor phosphorous in form of an independent network inside the cotton.

Independent network between cotton fibers
Gaan and his colleagues Rashid Nazir, Dambarudhar Parida and Joel Borgstädt utilized a tri-functional phosphorous compound (trivinylphosphine oxide), which has the capability of reacting only with specifically added molecules (nitrogen compounds like piperazin) to form its own network inside cotton. This makes the cotton permanently fire-resistant without blocking the favorable -OH groups. In addition, the physical phosphine oxide network also likes water. This flame retardant treatment does not include carcinogenic formaldehyde, which would endanger textile workers during textile manufacturing. The phosphine oxide networks, thus formed, does not wash out: After 50 launderings, 95 percent of the flame retardant network is still present in the fabric.

To render additional protective functionalities to the flame retardant cotton developed at Empa, the researchers also incorporated in situ generated silver nanoparticles inside the fabric. This works nicely in a one-step process together with generating the phosphine oxide networks. Silver nanoparticles provide the fiber with antimicrobial properties and survive 50 laundry cycles, too.

A high-tech solution from the pressure cooker
"We have used a simple approach to fix the phosphine oxide networks inside the cellulose," Gaan says. "For our lab experiments, we first treated the cotton with an aqueous solution of phosphorus and nitrogen compounds and then steamed it in a readily available pressure cooker to facilitate the crosslinking reaction of the phosphorus and the nitrogen molecules." The application process is compatible with equipment used in the textile industry. "Steaming textiles after dyeing, printing and finishing is a normal step in textile industry. So it doesn't require an additional investment to apply our process," states the Empa chemist.

Meanwhile, this newly developed phosphorus chemistry and its application is protected by a patent application. "Two important hurdles remain," Gaan says. "For future commercialization we need to find a suitable chemical manufacturer who can produce and supply trivinylphosphine oxide. In addition, trivinylphosphine oxide has to be REACH-registered in Europe."

Contact:
Dr. Sabyasachi Gaan
Advanced Fibers
Phone: +41 58 765 7611
sabyasachi.gaan@empa.ch
 
Contact:
Prof. Dr. Manfred Heuberger
Advanced Fibers
Phone: +41 58 765 7878
manfred.heuberger@empa.ch

A gel that releases drugs
The novel phosphorus chemistry can also be used to develop other materials, e.g. to make hydrogels that can release drugs upon changes in pH. Such gels could find application in treating wounds that heal slowly. In such wounds, the pH of the skin surface increases and the new phosphorus-based gels can be triggered to release medication or a dye that alerts doctors and nurses to the problem. Empa has also patented the production of such hydrogels.

Source:

EMPA, Rainer Klose

Photo: pixabay
25.01.2022

momox fashion presents Second Hand Fashion Report 2022

  • Representative study with almost 8,000 participants regarding the second hand fashion market in Germany
  • Second hand replaces new: 84 percent have bought less new goods due to second hand shopping
  • 71 percent have spent less money on new goods because they have bought second-hand clothing
  • For just under one in two (45 percent), buying second-hand clothing has become a matter of course
  • When buying second-hand fashion, sustainable production is more important (60 percent) than the brand name (48 percent)

Second hand replaces new - that's what 84 percent of second hand shoppers in Germany say, stating that buying second hand items has replaced buying a new clothing item for them.

  • Representative study with almost 8,000 participants regarding the second hand fashion market in Germany
  • Second hand replaces new: 84 percent have bought less new goods due to second hand shopping
  • 71 percent have spent less money on new goods because they have bought second-hand clothing
  • For just under one in two (45 percent), buying second-hand clothing has become a matter of course
  • When buying second-hand fashion, sustainable production is more important (60 percent) than the brand name (48 percent)

Second hand replaces new - that's what 84 percent of second hand shoppers in Germany say, stating that buying second hand items has replaced buying a new clothing item for them. Another 71 percent state that they have spent less money on clothing because they have bought used items.** These are the results of the current Second Hand Fashion Report 2022, for which the second hand online store momox fashion has conducted two studies for the third time in a row: A representative survey in cooperation with the market research institute Kantar as well as a customer survey among momox fashion customers to get detailed insights into the second hand clothing market. A total of 7,826 people took part in the surveys.

Buying second hand clothes has become a matter of course for every second person
The representative Kantar survey shows that buying second-hand clothing has become routine: 67 percent of Germans have already bought second-hand clothing at some point - an increase of eleven percent on the previous year. More than one in two (56 percent) do so regularly - at least once a year. For 45 percent, buying second-hand clothing has become a matter of course or very much a matter of course. In addition, more than half of Germans (53 percent) estimate that their closet consists of up to 20 percent second-hand clothing.*

Second hand clothing is not only shopped online, but also sold
The most popular way to buy used clothing is online shopping: 44 percent of respondents buy their second-hand fashion pieces online. Around one in three (28 percent) go to second-hand stores in search of their next favorite second-hand item, followed by flea markets with 14 percent. Surprisingly, the 50+ generation in particular likes to buy online (44 percent). Generation Z (under 25s), however, prefers second-hand stores (30 percent).*

But it is not only second-hand online shopping that is popular. Almost one in two (45 percent) resells used clothing, preferably online (76 percent). Only 11 percent sell at flea markets and 8 percent at second-hand stores.*

Sustainability remains main motivation for buying used clothing
To find out more about the reasons for buying second-hand clothing, momox fashion conducted a customer survey among almost 7,000 participants. The main motivation for buying second-hand clothing continues to be the sustainability aspect with 87 percent. 83 percent buy second-hand clothing because of the price savings compared to new goods. Around one in two (49 percent) goes in search of clothing in second-hand stores because the desired items are no longer available in regular stores.**

Almost all respondents (91 percent) generally consider sustainability and environmental protection to be important or very important when buying clothing. This is also reflected in consumer behavior: Around three quarters (85 percent) try to buy second-hand whenever possible. 58 percent make sure to purchase sustainable clothing. And 31 percent use environmentally friendly products for the care and cleaning of clothing.**

Sustainable production or brand name - which is more important?
For more than half (51 percent) of the respondents, the brand name is less important or unimportant when buying used clothing. Whether the clothing was produced sustainably, on the other hand, is considered by 60 percent to be very important or important. Especially for the 60+ generation (75 percent), sustainable production of second-hand clothing is very important or important.**

Second hand clothing is especially popular among parents
However, second-hand clothing is not only bought for oneself, almost every fifth person (18 percent) also buys it for his/her children.* Among the parents of the second-hand shoppers, 85 percent buy second-hand clothing for their children. Online stores (58 percent) and online marketplaces and second-hand online stores (51 percent) are the most popular. 43 percent buy used children's clothing from friends. 33 percent like to go shopping in second-hand stores and another 23 percent in stationary children's clothing stores. At the same time, 63 percent of respondents say they buy more second-hand clothing since becoming parents.**

Jackets and coats are second hand top sellers
Second-hand jackets and coats (70 percent) are the most popular items, followed by sweaters (60 percent), dresses and skirts (56 percent) and pants (49 percent). Pants and sweaters seem to have become more popular among second-hand shoppers compared to the previous year (previous year: 46 percent and 51 percent). Younger shoppers (18-29 year olds) prefer to buy their sweaters second hand even more than jackets and coats (80 percent).**

Sources:
* Kantar survey
** momox fashion survey
 
Method:
Kantar survey: number of cases (n=1,037), target group: 16-64 years; method: online survey in the survey period (13.-16.11.2021), conducted by Kantar Deutschland GmbH on behalf of momox AG.
 
momox fashion survey: number of cases (n=6,789), survey period (21.-26.10.2021), target group: momox fashion customers aged under 18 to over 60; method: online survey, conducted by momox AG

Download of study (in German)

(c) Schoeller Textil AG
18.01.2022

A jacket from a jacket from a jacket ...

Manufacture, wear, wash, incinerate: This typical life cycle of garments, which pollutes the environment, is to be changed in the future – towards principles of circular economy with recycling at its core. Using an outdoor jacket made from PET bottles and recycled materials, Empa researchers have investigated whether the product actually delivers what the idea promises.

At first glance, it's a normal rain jacket: three layers of polyester, a lining on the inside, a water vapor-permeable membrane on top and water-repellent fabric on the outside, with a hood. But the zipper makes you wonder. Instead of ending at collar height, it pulls up over the forehead ... – who would pull it that far?

Manufacture, wear, wash, incinerate: This typical life cycle of garments, which pollutes the environment, is to be changed in the future – towards principles of circular economy with recycling at its core. Using an outdoor jacket made from PET bottles and recycled materials, Empa researchers have investigated whether the product actually delivers what the idea promises.

At first glance, it's a normal rain jacket: three layers of polyester, a lining on the inside, a water vapor-permeable membrane on top and water-repellent fabric on the outside, with a hood. But the zipper makes you wonder. Instead of ending at collar height, it pulls up over the forehead ... – who would pull it that far?

The explanation is given by Annette Mark from textile manufacturer BTK Europe, who contributed to this product. The zipper is intended to be an eye-catcher – and is primarily for recycling: Sewn tight with a thread that dissolves in boiling water, it is easier to remove than two fasteners. "Pull once and you're done," says the expert on textiles and recycling. The light green color is also due to recycling: The raw material, a granule made from a mixture of different but single-variety textiles, is dark green – and melting and spinning out the material for new yarns lightens it.

Circular economy within textile industry
Magnetic buttons, seams, hems: Every detail of the jacket follows the Design2Recycle approach, as it says on the Wear2wear website. Six companies from Europe's textile industry have joined forces in this consortium to promote circular economy. After all, more than 70 percent of all textiles produced worldwide end up in landfills or incinerators without being recycled.

How can circular economy be acheived in this industry? A team from Empa's Technology and Society lab took a closer look at the jacket and its environmental impact using life cycle analyses over a four-year period of use; including washing it three times. The candidates: a jacket produced without circular economy methods, the "starter version" of the jacket available since 2019 in blue – with an outer layer made of polyester derived from used PET bottles – and the green version from the subsequent recycling process, in which unavoidable material losses are replaced by new polyester.

The researchers' analyses show that the recycled products perform better – in eleven environmental risk categories, including global warming, toxicity to ecosystems and water scarcity. There are strikingly large advantages in air pollution, for example, because fewer pollutants are released without incineration, as well as in water scarcity, especially for the green jacket after the first recycling "loop," for which PET bottles are no longer used.

Other insights from the analyses: In terms of greenhouse effect, the maximum benefit is a good 30 percent. And the use of PET bottles does not bring any major ecological benefits. What is decisive, on the other hand, is the number of recycling cycles to produce new jackets: The balance improves from jacket to jacket – provided the quality of the polyester remains high enough.

In practice, this is challenging, as Mark explains: "Depending on the origin, the raw material sometimes differs significantly." If the fibers have been coated with certain additives, the nozzles of the spinning machines can become clogged. And in general, the quality decreases with the number of recycling cycles: more irregular structures of the yarn and lower strength.

Annette Mark's conclusion on the Empa analyses: "very realistic" and useful for improvements. "The cooperation was very good," she says, "full transparency and no compromises." The researchers also found the collaboration fruitful. "Open collaboration between science and industry is enormously important," says former team member Gregor Braun, who has since left Empa and now works as a consultant for sustainability. "Sustainability and circular economy can work well together."

Will the jacket become a market success? "The textile industry is in a state of upheaval. A rethinking is taking place right now that we shouldn't miss," says Annette Mark. But large corporations that are already developing similar products "have completely different options." After all, talks are underway with a sportswear manufacturer – for a fleece jacket, for which the Empa findings could also be useful.

Microplastic fibers from textiles
Textiles made of polyester are making the headlines because of the release microplastic fibers – for instance, during washing – which is sometimes considered a threat to humans and the environment. Empa experts have studied the formation and release of microplastic fibers. Their results: Fibers are released primarily at the fabric's edges. Their formation and release depends, among other things, on the type of fiber, surface treatment and the type of cutting. Compared to other textiles, significantly fewer fibers are released from laser-cut textiles during washing. Empa is conducting studies with industrial partners to further reduce the formation of these fibers during textile production. In Swiss wastewater treatment plants, however, microfibers are largely removed from wastewater and incinerated with the sludge.

More information:
Empa PET Recycling polyester
Source:

EMPA, Norbert Raabe

Graphik: Pixabay
11.01.2022

FIMATEC innovation network enters second funding phase

The network for the development of fiber materials technology for healthcare and sports will receive funding from the Central Innovation Programme for SMEs (ZIM) for another two years.

The Federal Ministry for Economic Affairs and Climate Action (BMWi) approved a corresponding application in December 2021. This will continue to provide funding for the development of innovative functional fibers, smart textiles and application-optimized fiber composite materials until June 2023 and strengthen the technological competitiveness and innovative strength of small and medium-sized enterprises (SMEs).

The network for the development of fiber materials technology for healthcare and sports will receive funding from the Central Innovation Programme for SMEs (ZIM) for another two years.

The Federal Ministry for Economic Affairs and Climate Action (BMWi) approved a corresponding application in December 2021. This will continue to provide funding for the development of innovative functional fibers, smart textiles and application-optimized fiber composite materials until June 2023 and strengthen the technological competitiveness and innovative strength of small and medium-sized enterprises (SMEs).

For this purpose, the FIMATEC innovation network combines competences from different engineering and scientific disciplines with small and medium-sized manufacturers and service providers from the target sectors in medicine and sports (e.g. orthopaedics, prosthetics, surgery, smart textiles) as well as players from the textile and plastics industry.      

This interdisciplinary combination of industrial partners and application-oriented research institutions increases competitiveness and enables the players to realise their technical research and development projects quickly and in a targeted manner. The focus for the joint R&D projects of the companies and research institutions is on the development of innovative materials and efficient manufacturing technologies. 
          
Fiber-based materials have become indispensable in many applications in medicine and sports. As a pure fiber, processed into a textile or as a fiber composite plastic, they offer an almost unlimited variety for adjusting property and functional profiles. At the same time, the demands on the range of functions, performance and cost-effectiveness are constantly increasing, so that there is great potential for innovation. Developments are driven on the one hand by new materials and manufacturing processes, and on the other by innovative applications. Products with new and superior functions create a technological advantage over international competitors and enable higher sales revenues. In addition, efficient processes, application-optimized materials or even the integration of functions into the basic structure of textile materials lead to lower production costs and improved marketing opportunities in the future.
For developments in this context, the partners have joined forces in the FIMATEC innovation network, thus combining their expertise. Within the network, innovative materials and processes are being developed jointly in the following areas and tested in future-oriented products and services:

  • Functional fibers
    Innovative fiber materials with integrated functionalities
  • Preforming
    Highly load path optimized fiber orientations for complex fiber composite components.    
  • Smart Textiles
    Textile-based sensors and actuators
  • Hybrid material and manufacturing technologies
    Application-optimized components through cross-technology solution approaches.    
  • Fiber composites  
    Intelligent matrix systems and function-optimized fiber materials.    
  • Fiber-reinforced 3D printing  
    High-quality additive manufacturing processes for the efficient production of individualized products.

 
17 network partners are researching fiber-based materials for medical and sports technologyCurrently, ten companies and seven research institutions are involved in FIMATEC. Interested companies and research institutions as well as potential users can continue to participate in the cooperation network or R&D projects. In the course of membership, the partners are actively supported in identifying and initiating innovation projects as well as securing financing through funding acquisition. One application for ZIM project funding has already been approved by FIMATEC in its first year.

The aim of the already approved project "CFKadapt" is to develop a thermoformable fiber-plastic composite material for optimally adaptable orthopedic aids such as prostheses and orthoses. In the "Modul3Rad" project, which is currently being worked out in detail, the project partners intend to develop a modular lightweight frame system for the construction of user-friendly therapy tricycles, suitable for everyday use by severely and very severely disabled children. Three further collaborative projects are already in the planning stage.

The technology and knowledge transfer enables in particular small and medium-sized enterprises (SMEs) to access cutting-edge technological research, especially these are often denied access to innovations due to the lack of their own research departments. The IWS GmbH has taken over the network management for FIMATEC and supports the partners from the first idea to the search for suitable project partners and the preparation and coordination of funding applications. The aim is to obtain funding from the Central Innovation Programme for SMEs (ZIM), which offers companies funding opportunities for a wide range of technical innovation projects in cooperation with research institutions.

FIMATEC-netzwork partners
all ahead composites GmbH | Veitshöchheim | www.bike-ahead-composites.de
Altropol Kunststoff GmbH | Stockelsdorf | www.altropol.de
Diondo GmbH | Hattingen | www.diondo.com
Mailinger innovative fiber solutions GmbH | Sontra | www.mailinger.de
Sanitätshaus Manfred Klein GmbH & Co. KG | Stade | www.klein-sanitaetshaus.de
STREHL GmbH & Co KG | Bremervörde | www.rehastrehl.de
WESOM Textil GmbH | Olbersdorf | www.wesom-textil.de
Faserinstitut Bremen e.V. (FIBRE) | www.faserinstitut.de
E.F.M. GmbH | Olbersdorf | www.efm-gmbh.de
REHA-OT Lüneburg Melchior und Fittkau GmbH | Olbersdorf | www.rehaot.de
Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung IFAM | Bremen | www.ifam.fraunhofer.de
Leibniz-Institut für Polymerforschung Dresden e.V. (IPF) | www.ipfdd.de
Institut für Polymertechnologien Wismar e.V. (IPT) | www.ipt-wismar.de
Institut für Verbundwerkstoffe GmbH | Kaiserslautern | www.ivw.uni-kl.de

Associated network partners
9T Labs AG | Zürich, Schweiz | www.9tlabs.com
Fachhochschule Nordwestschweiz, Institut für Kunststofftechnik (FHNW) | www.fhnw.ch
KATZ - Kunststoff Ausbildungs- und Technologie-Zentrum | Aarau, Schweiz | www.katz.ch

Source:

Textination / IWS Innovations- und Wissensstrategien GmbH

photo: pixabay
04.01.2022

EU Project: System Circularity & Innovative Recycling of Textiles

SCIRT stands for System Circularity & Innovative Recycling of Textiles. Coordinated by VITO, an independent Flemish research organisation in the cleantech and sustainable development sector, SCIRT is a three year EU-funded project from the Horizon 2020 Programme.

It aims to demonstrate a complete textile-to-textile recycling system for discarded clothing—or post-consumer textiles—involving stakeholders throughout the value chain and focusing on the recycling of natural fibres, synthetic fibres and fibre blends. To reach this goal, the project has set four main objectives.

SCIRT stands for System Circularity & Innovative Recycling of Textiles. Coordinated by VITO, an independent Flemish research organisation in the cleantech and sustainable development sector, SCIRT is a three year EU-funded project from the Horizon 2020 Programme.

It aims to demonstrate a complete textile-to-textile recycling system for discarded clothing—or post-consumer textiles—involving stakeholders throughout the value chain and focusing on the recycling of natural fibres, synthetic fibres and fibre blends. To reach this goal, the project has set four main objectives.

  • Deliver a closed-loop recycling solution for discarded textiles.
  • Stimulate and encourage conscious design as well as production practices.
  • Create new business opportunities by boosting textile value chain activity.
  • Raise awareness of the environmental and social impacts of buying clothes.

Gathering 18 partners from five countries, the SCIRT project held its virtual kick-off meeting in mid-2021 to begin tackling the issue of clothing waste and recyclability, one of the biggest challenges faced in the fashion industry today.

As clothing brands are setting ambitious targets and making promises to incorporate recycled fibres in their products, discarded textiles are piling up in abundance around the globe. Though it would seem that the stars of supply and demand have aligned for this part of the circular economy, the truth is that less than 1% of textile waste is recycled into new textile fibres, according to an Ellen MacArthur Foundation report published in 2017. This miniscule percentage is indicative of a greater problem-achieving circularity in the fashion industry is not just a question of supply and demand, but of the connection between the two. There is a lack of knowledge surrounding the technological, economic and environmental feasibility of recycling fibre mixtures, and a need to align the quality and cost of recycling processes with the demands of textile companies and fashion brands.

SCIRT will develop solutions to support systemic innovation towards a more circular fashion system and bridge this supply-demand gap. To address the demand side of the equation, SCIRT will demonstrate a complete textile-to-textile recycling system for discarded clothing, otherwise known as post-consumer textiles, involving stakeholders throughout the value chain and focusing on the recycling of natural and synthetic fibres, as well as fibre blends. With the support of technical partners and research institutes, clothing brands Decathlon, Petit Bateau, Bel & Bo, HNST and Xandres, will develop, prototype and produce six different representative types of apparel using post-consumer recycled fibres. These include formal and casual wear, sportswear, underwear and uniforms. Through this endeavour, SCIRT will prioritise quality and cost-effectiveness in order to ensure market confidence and encourage the broad uptake of post-consumer recycled fibres.

From a non-technological perspective, SCIRT will develop supporting policy measures and tools to facilitate the transition towards a circular system for apparel. This includes a framework for an eco-modulated Extended Producer Responsibility (EPR) system and a True Cost Model to quantify circularity and increase value chain transparency. Special attention will also be given to the consumer perspective. To this end, Citizen Labs engaging consumers in various European locations, as well as a wider online engagement platform, will be developed to engage citizens throughout the project in order to understand the perceptions, motivations and emotions shaping their behaviour regarding the purchase, use, and disposal of textiles.

Over the next three years, SCIRT project partners will work to overcome current technological, economic, socio-economic and regulatory barriers faced in textiles recycling to achieve a real, lasting circular fashion economy.

2021:
The SCIRT project kicks off and partners identify the current state-of-the-art in apparel design, production and recycling, challenges and market trends, and stakeholder needs.

2022:
Designing and testing a fibre-to-fibre system by producing recycled yarns and filaments, free from harmful substances.

2023:
Formal wear, casual wear, sportswear, underwear and uniforms will be designed and produced using the optimized yarns developed.

Partners

  • Fashion companies: Bel&Bo, HNST, Decathlon, Xandres, Petit Bateau
  • Research organisations: VITO, CETI, Prospex Institute
  • Universities: BOKU, TU Wien, ESTIA
  • Industry players: Altex, AVS Spinning - A European Spinning Group (ESG) Company, Valvan
  • SMEs: Circular.fashion, FFact
  • Non-profit organisations: Flanders DC, IID-SII

 

ALTEX
ALTEX is a textile recycling company based in Germany that employs state-of-the-art machinery to recycle textile waste into new high-quality products. Its products include teared fibres, natural fibres, synthetic fibres and fibre blends among others.

Bel & Bo
Bel&Bo is a family-owned Belgian business with about 95 retail stores located throughout Belgium. Its mission is to offer colourful, fashionable and sustainably produced clothing for men, women and children at an affordable price.

CETI
The European Center for Innovative Textiles (CETI) is a non-profit organisation dedicated to conceiving, experimenting with and prototyping innovative textile materials and products through both private and collaborative R&D projects.

circular.fashion
circular.fashion offers software for circular design, intelligent textile sorting and closed-loop recycling, including the Circular Design Software and the circularity.ID®, as well as training and hands-on support to fashion brands in their transitions.

Decathlon
With over 315 stores in France, and 1,511 around the world, Decathlon has been innovating since 1976 to become the main player for athletic people. It has been engaged in reducing its environmental impact through a number of actions.

ESG
The European Spinning Group (ESG) is a textile group based in Belgium that offers a range of yarns produced with a highly technological open-end spinning mill for different applications, such as for interiors, fashion and technical textiles.

ESTIA
ESTIA is a French institute that has provided education and training in the areas of industrial technologies for 20 years. Since 2017, ESTIA has had a program focused on new materials and disruptive process in the fashion and textile industry.

FFACT
FFact is a unique group of management consultants that facilitates the implementation of sustainability from a business perspective, and translates facts into useful management information. FFact is based in the Netherlands and Belgium.

Flanders DC
The Flanders District of Creativity, a non-profit organisation based in Belgium, informs, coaches, promotes and inspires creative entrepreneurs in various sectors, including the fashion industry, who want to build or grow their business.

HNST
HNST is a Belgian circular denim brand that recovers post-consumer denim and recycles it into new fabric in the EU, creating durable and 100% recyclable jeans that use 82% less water and emit 76% less carbon dioxide than conventional jeans.

Petit Bateau
Petit Bateau is a French apparel brand that specialises in knit products. As a vertical company, Petit Bateau carries out its own knitting, dyeing, making up and store management with the support of its 3,000 employees.

Prospex Institute
The Prospex Institute aims to promote the participation of citizens and stakeholders in socially relevant decision-making dialogue and development by engaging with theorists and practitioners both in Belgium and abroad.

IID-SII
The Sustainable Innovation Institute is a French non-profit association based in Paris. Initiated by LGI, a French SME, the purpose of IID-SII is to act as a think and do tank on sustainable innovation to support the adoption of novel solutions.

TU Wien
TU Wien is an open academic institution where research, teaching and learning have taken place under the motto “Technology for people” for the past 200 years. One of its key areas of research is on recycling technology and fibre innovation.

BOKU
Research at the Institute for Environmental Biotechnology of BOKU based in Vienna, Austria focus on the exploitation of enzymes as powerful biocatalysts for biomaterials processing within recycling applications.

Valvan
Valvan Baling Systems has 30 years of experience in designing and constructing custom-made machinery, specialising in Baling Machines and Sorting Facilities for fibre producers, collectors, sorters and recyclers of textiles.

VITO
VITO, a leading independent European research and technology organisation in the cleantech and sustainable development sectors, aims to accelerate the transition towards a sustainable society by developing sustainable technologies.

Xandres
Xandres is a brand inspired by and for women. It is rooted in a highly respected tradition of fashion, driven by quality and created for the life women lead today. Xandres offers innovative designs with respect for luxury and the environment.

Es ist unendlich… © Jutta Jung
29.12.2021

Textile Designer Jutta Jung "WOMEN'S STORIES AND DREAMSCAPES"

  • ▪ Painting and Drawing by Jutta Jung
  • ▪ Exhibition in the gallery ART ROOM in Düsseldorf-Gerresheim (Germany) from 05-02-2022 – 04-03-2022
  • ▪ From Neo-Pop Art to Magic Realism

The creative signature of textile designer Jutta Jung cannot be pigeonholed - in her artistic expression, she moves between Neo-Pop Art, Figurative Expressionism and Magical Realism. In her upcoming exhibition at the ART ROOM-Düsseldorf gallery, the Neuss-based artist will be showing new realistic-expressive paintings with motifs of women, in which she combines textile-like structures with luminous pours of paint.

Jutta Jung: "We all live in one world, and yet we do not. We all see the same thing, but perceive it differently. The diversity of external and internal views has always fascinated me."

  • ▪ Painting and Drawing by Jutta Jung
  • ▪ Exhibition in the gallery ART ROOM in Düsseldorf-Gerresheim (Germany) from 05-02-2022 – 04-03-2022
  • ▪ From Neo-Pop Art to Magic Realism

The creative signature of textile designer Jutta Jung cannot be pigeonholed - in her artistic expression, she moves between Neo-Pop Art, Figurative Expressionism and Magical Realism. In her upcoming exhibition at the ART ROOM-Düsseldorf gallery, the Neuss-based artist will be showing new realistic-expressive paintings with motifs of women, in which she combines textile-like structures with luminous pours of paint.

Jutta Jung: "We all live in one world, and yet we do not. We all see the same thing, but perceive it differently. The diversity of external and internal views has always fascinated me."

As a counterpoint to her paintings of women, some of which are autobiographical in origin or can also stimulate the viewer's imagination for stories of their own, she is presenting a current series of surface paintings in the gallery. These are presented in her typical colourfulness and overlapping forms and structures.

This is complemented by an excerpt from her collection of "Women's Stories and Dream Landscapes" with expressive portrait drawings and abstract paintings. On large canvas formats, Jutta Jung works out in a painterly-gestural way what she wants to make visible. Power meets colour. Fine strokes and drawings are combined with painting on paper and in smaller formats - from contemplative to impulsive. Worlds of colour, abstracted landscapes, compositions that take up symbols and signs, figurative elements or depictions of people: Jutta Jung combines a variety of materials and artistic techniques in her paintings to depict her perspectives and ways of seeing. "There are always new worlds to discover," she says.

On the occasion of its 50th anniversary, the Kreismuseum Zons is showing the special event "Art to the Last Corner" from 13 May to 26 June 2022. Jutta Jung is one of seven selected artists and will present works on her theme "Global Ethno". The museum as part of a former castle with buildings from the 17th to the end of the 20th century gives exhibitions a special presentation framework. It also contains the 900 works of Prof. Helmut Hahn's life's work from forty years of activity.

Vita
Jutta Jung lives and works in the Rhineland. She completed her design studies (specialising in textile design) at the Niederrhein University of Applied Sciences in Krefeld with a diploma under Professor Helmut Hahn with the grade "very good". Her main subjects were free drawing, free painting, illustration, colour composition, conception & design, art science, design theory. In addition to her many years of work as a textile designer and collection designer in the Rhineland textile industry, she has been working as a freelance designer and artist in her own studio since 2003:
▪ Textile design and collection design for companies in Europe and Asia. (including fabric designs, porcelain decors and designs for handmade carpets).
▪ Free painting and sale of works to private collectors.
Since 2010, Jutta Jung has concentrated exclusively on free artistic work in painting and drawing. She is a member of Kunst.Neuss e.V. and the artist network crossart international.

Contact:
E-Mail: jutta-jung-artwork@gmx.de
Web: https://juttajungartwork.com/

Photo: Pixabay
21.12.2021

Consumption after Corona: Consumers focus on Quality and Sustainability

Study by Roland Berger and Potloc

  • Consumers expect more quality (67%) and sustainability (51%) from brands and products
  • Small retail stores are trendy and score with exclusive product range
  • Furniture, household and garden articles remain in focus

The Covid pandemic has changed the purchasing behavior. Consumers are focusing primarily on brands with high quality standards (67%) and sustainable products (51%). Even though the trend towards online shopping remains unbroken, small stores in particular can score points with exclusive product ranges. Almost a third (32%) of consumers visit these types of stores more frequently than before the crisis. These are the core findings of the "Decoding Consumer Behavior" study published in fall 2021 by Roland Berger and Potloc, for which 2,100 consumers from twelve countries were surveyed.

Study by Roland Berger and Potloc

  • Consumers expect more quality (67%) and sustainability (51%) from brands and products
  • Small retail stores are trendy and score with exclusive product range
  • Furniture, household and garden articles remain in focus

The Covid pandemic has changed the purchasing behavior. Consumers are focusing primarily on brands with high quality standards (67%) and sustainable products (51%). Even though the trend towards online shopping remains unbroken, small stores in particular can score points with exclusive product ranges. Almost a third (32%) of consumers visit these types of stores more frequently than before the crisis. These are the core findings of the "Decoding Consumer Behavior" study published in fall 2021 by Roland Berger and Potloc, for which 2,100 consumers from twelve countries were surveyed.

"Overall, consumers are much more positive about the future and, for the most part, do not want to cut back further in 2022. This is good news for retailers, who had to overcome an unprecedented cut with the pandemic," says Thorsten de Boer, Partner at Roland Berger. "However, brands and retailers should take into account that consumers have different priorities when making decisions today. They also expect a consistent online presence across platforms and devices more than ever. And when they enter a store, they are looking for an exclusive experience."

Customers focus on goods for their own homes and everyday needs
In the immediate purchasing decision, value for money (68%) and quality (56%) are the most important criteria for consumers. Here, too, sustainability is becoming increasingly important. One-third want to give even greater consideration to this criterion in the future. Sustainability has finally reached the consumer," says Richard Federowski, Partner at Roland Berger.

A look at the shopping baskets shows that the focus continues to be on products for everyday needs and the home (furniture, household and garden articles). 37% have spent more money on food this year, for example, and 29% also want to make additional investments here in 2022. "The trend towards cocooning, i.e. retreating into a private domestic life, continues to have an impact. The demand for business outfits, will tend to remain at a low level in the near future," says Federowski. "Fashion from the sports and leisure sector also continues to be in high demand, and sustainability aspects will increasingly have to be taken into account in collections. However, purchases here will be made primarily online because it is simply more convenient for most people."

City center retailers can score with customer service and product ranges
Online retailing continues to gain ground globally. Online retailing continues to gain ground globally. A third of the people surveyed said they would order more online in 2021 than in the previous year. Above all, free delivery and the ability to return items easily and free of charge are important to customers. "Consumers have learned how convenient and fast online shopping can be, and this is true across all product categories - including groceries to an increasing extent," says de Boer. Services such as (virtual) advice, click-and-collect or live shopping currently play only a minor role in online shopping, but will become essential in the future.

The situation is very different when it comes to shopping in stores. German consumers in particular are flocking to city centers to enjoy the benefits of personal advice (51%). While frequencies are not yet at pre-Corona levels, conversion rates are very good. They also want to access exclusive product ranges (37%) and celebrate their shopping. "Therein lies an opportunity for retailers and city centers," says de Boer. "However, in order to compete, even small retailers can no longer do it without a digital component. To do so, they need to take their exclusive experiences to social platforms. They also know their clientele well and often sit on valuable data - this potential of 'small data' and 'communities' needs to be tapped."

The study in English can be downloaded here.

Source:

Roland Berger and Potloc

(c) STFI
14.12.2021

Funding Project Raw Material Classification of Recycled Fibers

For centuries, old textiles have been used to make tear fibers and processed into new textile products. This effective recycling is one of the oldest material cycles in the world. Today, it is not only clothing that is recycled, but also high-quality technical textiles. As the products of the textile industry evolve, so do the demands on textile recycling. The basis for this is a clear assessment and classification of raw materials.

For centuries, old textiles have been used to make tear fibers and processed into new textile products. This effective recycling is one of the oldest material cycles in the world. Today, it is not only clothing that is recycled, but also high-quality technical textiles. As the products of the textile industry evolve, so do the demands on textile recycling. The basis for this is a clear assessment and classification of raw materials.

In the research project of the German Institutes of Textile and Fiber Research Denkendorf (DITF) and the Sächsisches Textilforschungsinstitut e.V. (STFI - Saxony Textile Research Institute), a methodology is being developed that will make it possible to analyze the tearing as well as the subsequent processes with regard to fiber quality. The systematic analysis should make it possible to optimize the subsequent spinning processes in such a way that the recycled content of the yarn can be increased without the yarn properties differing significantly from those of a yarn consisting of 100% good fibers. These yarns can then be processed into sustainable textile products such as clothing or composite components.

The project, which is funded by the BMWi/IGF, is scheduled to run for two years and will end on December 31, 2022. The main benefits for the participating companies are to enable them to make greater use of secondary raw materials, to open up new markets through technologies or products developed in the project, to initiate synergies and long-term cooperation, and to prepare a joint market presence.    

The project includes several steps:

  • Material selection and procurement
    Cotton fibers to be processed are obtained from used textiles (T-shirts) and waste from the cotton spinning mill. Aramid fibers are processed from used protective clothing and technical textiles.
  • Optimization of the preparation / dissolution of the textiles
    To ensure that the fibers are detached from the corresponding textiles as gently as possible and with a not too high reduction, exact settings have to be found for the tearing process, which are technologically very demanding and require a lot of experience.
  • Determination of the quality criteria for the evaluation of the fiber dissolution
    In order to define the quality criteria, the fibers coming from the tearing mill are determined by means of an MDTA-4 measuring device from Textechno GmbH & Co. KG. The criteria determined are to be used to characterize the (lowest possible) fiber shortening caused by the tearing process.
  • Determination of optimized settings in the spinning process
    In order to determine the optimum settings for producing a yarn from the recycled fibers, they are spun after the rotor spinning process. By adjusting the spinning process, the aim is to produce a yarn that has good uniformity and also appropriate firmness.
  • Production and comparison of yarns from recycled raw materials
    In order that the recycled fibers - consisting of aramid and cotton - can each be used to produce an area-measured material, the material is to be processed at industrial scale. For this purpose, the fibers are processed over a complete blowroom line with following sliver production over adapted cards. After drawing and the following roving production, yarns are produced according to the rotor or ring spinning process. The finished yarns are used to produce knitted fabrics.
  • Coordination, analysis of results and preparation of reports
    The final report is prepared by the DITF and the STFI. The results will be transferred through publications, technical information to associations and trade fair presentations. Regular meetings with the participating companies are planned.

Textination spoke with Stephan Baz, Deputy Head of the Competence Center Staple Fiber, Weaving & Simulation, Head of Staple Fiber Technology and Markus Baumann, Research Associate at the Competence Center Staple Fiber, Weaving & Simulation (both DITF) as well as Bernd Gulich, Head of Department Nonwovens/Recycling and Johannes Leis, Research Associate Focus Nonwovens/Recycling (both STFI) about the current status of the funding project.

What is the current status of the project?
We are currently in the phase of carrying out trials and the iterative optimization of several project components. As expected, several loops are necessary for the mechanical preparation itself and also for the adjustment of the spinning process with the different variants. Ultimately, after all, the project aims at coordinating the processes of mechanical preparation and spinning as processing in order to achieve optimum results. At the same time, determining the quality criteria of the fibers produced is not trivial. This also requires the further development of processes and test methods that can be implemented productively in industry and that allow the quality of the fibers produced to be assessed effectively and unaffected by residual yarns, for example. What is really remarkable is the interest and willingness of the industry to drive the project work forward. The considerable quantities of materials required for our trials were purchased from ReSales Textilhandel und -recycling GmbH, Altex Textil-Recycling GmbH & Co. KG and Gebrüder Otto GmbH & Co. KG. Furthermore, with Temafa Maschinenfabrik GmbH, Nomaco GmbH & Co. KG, Schill + Seilacher GmbH, Spinnerei Neuhof GmbH & Co. KG and Maschinenfabrik Rieter AG, many members of the project-supporting committee are actively involved in the project, from consulting to the providing of technologies. The company Textechno Herbert Stein GmbH & Co. KG has provided a testing device of the type MDTA4 for the duration of the project and supports our work with regard to the evaluation of the mechanically prepared fibers. We are of course particularly pleased about this, as it has allowed us to look at and analyze several technologies in both mechanical preparation, testing and spinning. We expect to be able to make more detailed statements at the beginning of the coming year.

Which approaches do you think are particularly promising?
With regard to technologies, we must refer to the evaluation and analysis of the trials, which are currently still ongoing. We will be able to go into more detail in the first quarter of next year.

Of course, things are already emerging. With meta-aramid waste, promising approaches could be found very quickly; with post-consumer cotton, this is considerably more complex. Obviously, there is a link between the quality of the raw material and the quality of the products. In some cases, we have already been able to determine very low average fiber lengths in the procured goods; to a certain extent, these are of course directly reflected in the output of our processes. From this, and this is not a new finding, a great importance of the design of the textiles is again derived.

What are the challenges?
In addition to the expected high short fiber content, the residual yarns after the tearing process are an issue of particular focus. The proportion of these residual yarns can vary between the materials and preparation technologies, but the further dissolution of the products of the tearing process is essential.

If the processes are considered further in a utilization phase, the question of design naturally also arises for the best possible use of recycled fibers. Many problems, but also the approaches to solutions for the use of comparatively short fibers, can also be expected to apply to the (multiple) use of mechanically recycled fibers.

Can we speak of upcycling in the final product?
We see yarn-to-yarn recycling neither as upcycling nor downcycling, but as closed-loop recycling. The background is that the products are to go into the same application from which they came and have to compete with primary material. This means that certain specific requirements have to be met and at the same time there is considerable price pressure. In the case of downcycling, a significant reduction in properties is accepted, while in the case of upcycling, the higher-priced application can make up for the reprocessing effort. In the attempt to produce yarn material again from yarn material, both are only permissible to a small extent. This represents the particular challenge.

What does a recyclate prepared from used textiles mean for the spinning process?
Part of this question is to be answered in the project by the detailed classification of the processed fibers and is thus the subject of the tests currently underway. It turns out that, in addition to the rather obvious points such as significantly reduced fiber length, process disturbances due to undissolved fabrics and yarn pieces, there are also less obvious aspects to be considered, such as a significantly increased outgoing quantity for processing in the spinning process. The outgoing quantity is of particular interest here, because in the end the newly produced yarn should also contain a considerable proportion of prepared fibers.

What consequences does this have for textile machinery manufacturing?
The consequences that can already be estimated at the present time are that, particularly in the processing of cotton, the machinery in the spinning preparatory mill is specialized in the processing of (new) natural fibers with a certain amount of dirt. In contrast to new fibers, processed fibers are clean fibers with a significantly higher proportion of short fibers. Elements that are good at removing dirt also reject an increased amount of short fibers, which can lead to unintentionally high waste quantities under certain circumstances. It is therefore necessary to adapt the established machine technology to the new requirement profile of the raw material "processed fibers". Analogous adaptations are probably necessary along the entire processing chain up to the yarn. In the drafting system of the spinning machine, of course, this is due more to the high short fiber ratio than to elements that have been optimized for cleaning out dirt and foreign substances.

Source:

Textination GmbH

(c) nova-Institut GmbH
07.12.2021

Finalists for „Cellulose Fibre Innovation of the Year 2022” announced

Cellulose Fibre Innovation of the Year 2022: Cellulose Fibre Solutions are expanding from hygiene and textiles as well as non-wovens up to alternatives for carbon fibres for light-weight applications.

Great submissions made the nomination for the Innovation Award difficult. All of them present promising sustainable solutions in the field of cellulose fibres value chain. Six of them now get the chance to demonstrate their potential to a wide audience in Cologne (Germany), and online.

Cellulose Fibre Innovation of the Year 2022: Cellulose Fibre Solutions are expanding from hygiene and textiles as well as non-wovens up to alternatives for carbon fibres for light-weight applications.

Great submissions made the nomination for the Innovation Award difficult. All of them present promising sustainable solutions in the field of cellulose fibres value chain. Six of them now get the chance to demonstrate their potential to a wide audience in Cologne (Germany), and online.

For the second time, nova-Institute grants the “Cellulose Fibre Innovation of the Year” within the framework of the “International Conference on Cellulose Fibres 2022” (2-3 February 2022). The advisory board of the conference nominated six  products, ranging from cellulose made of orange- and wood pulp to a novel technology for cellulose fibre production. The presentations, election of the winner by the conference audience and the award ceremony will take place on the first day of the conference.

Cellulose fibres show an increasingly expanding wide range of applications, while at the same time markets are driven by technological developments and political framework conditions, especially bans and restrictions on plastics and increasing sustainability requirements. The conference provides rich information on opportunities for cellulose fibres through policy assessment, a session on sustainability, recycling and alternative feedstocks as well as latest development in pulp, cellulose fibres and yarns. This includes application such as non-wovens, packaging and composites.

Here are the nominees:
Carbon Fibres from Wood – German Institutes of Textile and Fiber Research Denkendorf (Germany)
The HighPerCellCarbon® technology is a sustainable and alternative process for the production of carbon fibres made from wood. The technology starts with wet spinning of cellulosic fibres using ionic liquids (IL) as direct solvent in an environmentally friendly, closed loop filament spinning process (HighPerCell® technology). These filaments are directly converted into carbon fibres by a low-pressure stabilisation process, followed by a suitable carbonisation process. No exhaust fumes or toxic by-products are formed during the whole process. Furthermore, the approach allows a complete recycling of solvent and precursor fibres, creating a unique and environmentally friendly process. Carbon fibres are used in many lightweight applications and the fibres are a sustainable alternative to fossil-based ones.

Fibers365, Truly Carbon-Negative Virgin Fibres from Straw – Fibers365 (Germany)
Fibers365 are the first carbon-negative virgin straw fibres on the market. The Fibers365 concept is based on a unique, state of the art process to provide functional, carbon negative, and competitive non-wood biomass products such as virgin fibres for paper, packaging and textile purposes as well as high value process energy, biopolymer and fertilizer side streams. The products are extracted from the stems of annual food plants such as straw by a chemical-free, regional, farm level steam explosion pulping technology, allowing an easy separation of the fibres from sugars, lignin, organic acid and minerals. In the case of annual plants, CO2 emissions are recaptured within 12 months from their production date, offering “instant”, yearly compensation of corresponding emissions.

Iroony® Hemp and Flax Cellulose – RBX Créations (France)
Iroony® is a branded cellulose made by RBX Créations from hemp. This resistant hemp plant grows quickly within in a few months, massively captures carbon and displays a high content of cellulose. The biomass is directly collected from French farmers who cultivate without chemicals or irrigation, in extended rotation cycles, contributing to soil regeneration and biodiversity. For a diversified supply, the hemp can be combined with organically-grown flax. Through its patented process, RBX Créations extracts high-purity cellulose, perfectly suitable for spinning technologies such as HighPerCell® of DITF research centre. The resulting fibres display versatile properties of fineness, tenacity and stretch, for applications like clothing or technical textiles. Iroony® combines low impact, trackability and performance.

SPINNOVA, Sustainable Textile Fibre without Harmful Chemicals – Spinnova (Finland)
Spinnova’s innovative technology enables production of sustainable textile fibres in a mechanical process, without dissolving or any harmful chemicals. The process involves use of paper-grade pulp and mechanical refining to turn pulp into microfibrillated cellulose (MFC). The fibre suspension consisting of MFC is extruded to form textile fibre, without regeneration processes. The Spinnova process does not generate any side waste, and the environmental footprint of SPINNOVA® including 65 % less CO2 emissions and 99 % less water compared to cotton production. Spinnova’s solution is also scalable: Spinnova targets to reach 1 million tonnes annual production capacity in the next 10 to 12 years.    

Sustainable Menstruation Panties: Application-driven Fibre Functionalisation – Kelheim Fibres (Germany)
Kelheim’s plant-based and biodegradable fibres contribute significantly to a sustainable future in the field of reusable hygiene textiles. Through innovative functionalisation they are specifically adjusted to the requirements of the single layers and thereby reach a performance comparable to that of synthetic fibres. A unique duality in fibre technology is created: sustainably manufactured cellulosic fibres that allow for high wearing comfort and reusability with extraordinary, durable performance. Fibre concepts comprise Celliant® Viscose, an in-fibre infrared solution and Danufil® Fibres in the top sheet, Galaxy, a trilobal fibre for the ADL, Bramante, a hollow viscose fibre, in the absorbing core and a water repellent woven fabric, a biodegradable PLA film or a sustainable coating as a back sheet.

TENCEL™ branded Lyocell Fibre made of Orange and Wood Pulp – Orange Fiber (Italy)
Orange Fiber is the world's first company to produce a sustainable textile fibre from a patented process for the extraction of cellulose to be spun from citrus juice leftovers, which are more than 1 million tonnes a year just in Italy. The result of our partnership with Lenzing Group, leading global producer of wood-based specialty fibres, is the first ever TENCEL™ branded lyocell fibre made of orange and wood pulp. A novel cellulosic fibre to further inspire sustainability across the value chain and push the boundaries of innovation. This fibre, part of the TENCEL™ Limited Edition initiative, is characterized by soft appeal and high moisture absorbance and has already obtained the OEKO-TEX Standard 100 certificate and is undergoing a diverse set of other sustainability assessments.

IT solutions for stable supply chains © pixabay
30.11.2021

IT solutions for stable supply chains

Global supply chains comprise complex networks, making them particularly vulnerable. The UK is a prime example of this, where logistics problems are currently resulting in empty supermarket shelves and closed gas stations. Fraunhofer experts provide IT solutions that counteract supply bottlenecks in international goods traffic and maintain robust supply chains.

Earthquakes in South America, floods in Germany or political unrest in Asia: all compromise supply chains. A research team at the Fraunhofer Institute for Industrial Mathematics ITWM is developing mathematical methods that can be used to calculate how to minimize risks to supply chains. “Mathematically speaking,” explains Dr. Heiner Ackermann, Deputy Head of Optimization – Operations Research, “these disruptive events create a multidimensional decision problem.”    

Global supply chains comprise complex networks, making them particularly vulnerable. The UK is a prime example of this, where logistics problems are currently resulting in empty supermarket shelves and closed gas stations. Fraunhofer experts provide IT solutions that counteract supply bottlenecks in international goods traffic and maintain robust supply chains.

Earthquakes in South America, floods in Germany or political unrest in Asia: all compromise supply chains. A research team at the Fraunhofer Institute for Industrial Mathematics ITWM is developing mathematical methods that can be used to calculate how to minimize risks to supply chains. “Mathematically speaking,” explains Dr. Heiner Ackermann, Deputy Head of Optimization – Operations Research, “these disruptive events create a multidimensional decision problem.”    

Cushioning risks without additional costs
Ackermann’s team of experts analyze the properties of supply chains using mathematical models. The failure scenarios simulated on the basis of these calculations show at which points there is a greater need for action. In the second step, the researchers focus on holistic optimization – for a more robust supply chain that can cushion risks without incurring major costs. The experts package all variables into a multicriteria optimization problem. In this way, they determine the best possible solution for the triad of resilience, cost and risk. Algorithms calculate the optimum balance and with it various options for raw materials, suppliers and warehousing. Even the use of alternative materials is considered. The top priority: as few assumptions as possible. “Our work has set the ball rolling – companies that previously relied on Excel spreadsheets and their gut feeling are now engaging in very fruitful discussions,” explains Ackermann, adding: “Whether you are dealing with supply chains or supply networks, mathematics is a universal and very effective tool.”

Early detection of potential supply shortages
The Fraunhofer Institute for Material Flow and Logistics IML also offers highly effective support for testing and optimizing supply chains with its Order-To-Delivery-NETwork (OTD-NET) simulator. Thanks to this tool, planning and material flow processes from order to delivery can be continuously assessed. “OTD-NET maps even highly complex supply chains in full and at all levels, including the planning and information flow processes. Using various parameters, it is possible to accurately model cooperation between supply chain partners on the computer,” specifies Marco Motta, Head of Supply Chain Engineering at Fraunhofer IML.
 
Combining digital twins of supply chains with simulations
The tool set examines networks particularly with regard to customer promises in terms of delivery reliability and quality, etc., costs, environmental considerations and, in the analysis of alternative scenarios, resilience. “In the simulation, I can easily play around with demand peaks, a slump in the respective market or scenarios in which production is disrupted,” explains the Fraunhofer IML expert. In this way, forecasts can be made about how a supply chain will react in a state of emergency. Logistics assistance systems that combine a digital twin of the supply chain with simulations show dispatchers which cargo ships have loaded which parts, where these are located and when the consignment will be available at the required location. Supply for the next 20–30 weeks can thus be depicted for global networks, enabling potential bottlenecks to be detected early on. Tracking is also a distinguishing feature of the solution for demand and capacity management. Not only is the number of parts affected displayed but planners can also directly see the impact of this on the whole of production.
 
Most recently, both the automotive and medical sectors have suffered from supply bottlenecks. Saskia Sardesai, Senior Scientist at Fraunhofer IML, is leading different research projects in which OTD-NET is being used to increase resilience in value creation networks for medical supplies. “Especially smaller and medium-sized companies were addressing this problem using existing spreadsheet analysis tools. However, this approach does not identify dynamics.” This is where OTD-NET comes into play: The simulation dynamically shows over a long period whether all parts will be at the right location at the right time. “If all parts are available except for those from my transatlantic supplier and there is no alternative supplier in Europe, I will quickly have a break in my chain lasting over a month,” outlines the specialist.

Increasing the European manufacturing sector’s resilience to future pandemics In the European research project “CO-VERSATILE”, overseen by Sardesai, participants are doing everything in their power to increase the European manufacturing sector’s resilience to future pandemics. The supply chain should be able to react quickly and effectively to a sudden spike in demand for strategic medical supplies. To that end, experts at Fraunhofer IML have developed a simulation model that takes into account future peaks and fluctuations in demand as well as supplier risks. Companies are immediately given an overview of which effects they will have to face. “We have created very simple models to facilitate rapid feedback and implementation for a variety of companies,” explains the project manager. Particular attention was paid to capacities, lead times, transportation frequency and possible supply restrictions. Users can see how individual factors interplay – an invaluable advantage compared to the long-standing Excel solution.

(c) Toray
23.11.2021

Toray Industries: A Concept to change Lives

Founded in January 1926, Tokyo-based Japanese chemical company Toray Industries, Inc. is known as the world's largest producer of PAN (polyacrylonitrile)-based carbon fibers. But its overall portfolio includes much more. Textination spoke with Koji Sasaki, General Manager of the Textile Division of Toray Industries, Inc. about innovative product solutions, new responsibilities and the special role of chemical companies in today's world.

Toray Industries is a Japanese company that - originating in 1926 as a producer of viscose yarns - is on the home stretch to its 100th birthday. Today, the Toray Group includes 102 Japanese companies and 180 overseas. They operate in 29 countries. What is the current significance of the fibers and textiles business unit for the success of your company?

Founded in January 1926, Tokyo-based Japanese chemical company Toray Industries, Inc. is known as the world's largest producer of PAN (polyacrylonitrile)-based carbon fibers. But its overall portfolio includes much more. Textination spoke with Koji Sasaki, General Manager of the Textile Division of Toray Industries, Inc. about innovative product solutions, new responsibilities and the special role of chemical companies in today's world.

Toray Industries is a Japanese company that - originating in 1926 as a producer of viscose yarns - is on the home stretch to its 100th birthday. Today, the Toray Group includes 102 Japanese companies and 180 overseas. They operate in 29 countries. What is the current significance of the fibers and textiles business unit for the success of your company?

The fibers’ and textiles’ business is both the starting point and the foundation of Toray's business development today. We started producing viscose yarns in 1926 and conducted our own research and development in nylon fibers as early as 1940. And since new materials usually require new processing methods, Toray also began investing in its own process technology at an early stage. On the one hand, we want to increase our sales, and on the other hand, we want to expand the application possibilities for our materials. For this reason, Toray also began to expand its business from pure fibers to textiles and even clothing. This allows us to better respond to our customers' needs while staying at the forefront of innovation.

Over the decades, Toray has accumulated a great deal of knowledge in polymer chemistry and organic synthesis chemistry - and this know-how is the foundation for almost all of our other business ventures. Today, we produce a wide range of advanced materials and high-value-added products in plastics, chemicals, foils, carbon fiber composites, electronics and information materials, pharmaceuticals, medicine and water treatment. However, fibers and textiles remain our most important business area, accounting for around 40% of the company's sales.

What understanding, what heritage is still important to you today? And how do you live out a corporate philosophy in the textile sector that you formulate as "Contributing to society through the creation of new value with innovative ideas, technologies and products"?

Toray has consistently developed new materials that the world has never seen before. We do this by focusing on our four core technologies: Polymer chemistry, organic synthetic chemistry, biotechnology and nanotechnology. We do this by focusing on our four core technologies: Polymer chemistry, organic synthetic chemistry, biotechnology and nanotechnology. For textiles, this means we use new polymer structures, spinning technologies and processing methods to develop yarns with unprecedented properties. We always focus on the needs and problems of the market and our customers.

This approach enables us to integrate textiles with new functions into our everyday lives that natural fibers and materials cannot accomplish. For example, we offer sportswear and underwear that absorb water excellently and dry very quickly, or rainwear and outdoor clothing with excellent water-repellent properties that feature a less bulky inner lining. Other examples include antibacterial underwear, uniforms, or inner linings that provide a hygienic environment and reduce the growth of odor-causing bacteria. People enjoy the convenience of these innovative textiles every day, and we hope to contribute to their daily comfort and improve their lives in some way.

In 2015, the United Nations adopted 17 sustainable development goals – simply known as the 2030 Agenda, which came into force on January 01, 2016. Countries were given 15 years to achieve them by 2030. In your company, there is a TORAY VISION 2030 and a TORAY SUSTAINABILITY VISION. How do you apply these principles and goals to the textile business? What role does sustainability play for this business area?

Sustainability is one of the most important issues facing the world today - not only in the textile sector, but in all industries. We in the Toray Group are convinced that we can contribute to solving various problems in this regard with our advanced materials. At the same time, the trend towards sustainability offers interesting new business approaches. In our sustainability vision, we have set four goals that the world should achieve by 2050. And we have defined which problems need to be addressed to achieve this.

We must:

  1. accelerate measures to combat climate change,
  2. implement sustainable, recycling-oriented solutions in the use of resources and in production,
  3. provide clean water and air, and
  4. contribute to better healthcare and hygiene for people around the world.

We will drive this agenda forward by promoting and expanding the use of materials that respond to environmental issues. In the textile sector, for example, we offer warming and cooling textiles – by eliminating the need for air conditioning or heating in certain situations, they can help reduce energy costs. We also produce environmentally friendly textiles that do not contain certain harmful substances such as fluorine, as well as textiles made from biomass, which use plant-based fibers instead of conventional petrochemical materials. Our product range also includes recycled materials that reduce waste and promote effective use of resources.

The TORAY VISION 2030, on the other hand, is our medium-term strategic plan and looks at the issue of sustainability from a different angle: Toray has defined the path to sustainable and healthy corporate growth in it. In this plan, we are focusing on two major growth areas: Our Green Innovation Business, which aims to solve environmental, resource and energy problems, and the Life Innovation Business, which focuses on improving medical care, public health, personal safety and ultimately a longer expectancy of life.

Innovation by Chemistry is the claim of the Toray Group. In a world where REACH and Fridays for Future severely restrict the scope of the chemical industry, the question arises as to what position chemistry can have in the textile industry. How do chemistry, innovation and sustainability fit together here?

The chemical industry is at a turning point today. The benefits that this industry can bring to civilization are still enormous, but at the same time, disadvantages such as the waste of resources and the negative impact on the environment and ecosystems are becoming increasingly apparent. In the future, the chemical industry will have to work much more towards sustainability - there is no way around it.

As far as textiles are concerned, we believe there are several ways to make synthetic materials more sustainable in the future. One of these, as I said, is materials made from plants instead of petrochemical raw materials. Another is to reduce the amount of raw materials used in production in the first place – this can be achieved, for example, by collecting and recycling waste materials from production or sales. Biodegradable materials that reduce the impact of waste products on the environment are another option worth pursuing, as is the reduction of environmentally harmful substances used in the production process. We are already looking at all of these possibilities in Toray's synthetic textiles business. At the same time, by the way, we make sure to save energy in our own production and minimize the impact on the environment.

Toray's fibers & textiles segment focuses on synthetic fibers such as nylon, polyester and acrylic, as well as other functional fibers. In recent years, there has been a clear trend on the market towards cellulosic fibers, which are also being traded as alternatives to synthetic products. How do you see this development – on the one hand for the Toray company, and on the other hand under the aspect of sustainability, which the cellulosic competitors claim for themselves with the renewable raw material base?

Natural fibers, including cellulose fibers and wool, are environmentally friendly in that they can be easily recycled and are rapidly biodegradable after disposal. However, to truly assess their environmental impact, a number of other factors must also be considered: Primarily, there is the issue of durability: precisely because natural fibers are natural, it is difficult to respond to a rapid increase in demand, and quality is not always stable due to weather and other factors.

Climatic changes such as extreme heat, drought, wind, floods and damages from freezing can affect the quantity and quality of the production of natural fibers, so that the supply is not always secured. In order to increase production, not only does land have to be cleared, but also large amounts of water and pesticides have to be used to cultivate it – all of which is harmful to the environment.

Synthetic fibers, on the other hand, are industrial products manufactured in controlled factory environments. This makes it easier to manage fluctuations in production volume and ensure consistent quality. In addition, certain functional properties such as resilience, water absorption, quick drying and antibacterial properties can be embedded into the material, which can result in textiles lasting longer in use.

So synthetic fibers and natural fibers, including cellulose fibers, have their own advantages and disadvantages – there is no panacea here, at least not at the moment. We believe: It is important to ensure that there are options that match the consumer's awareness and lifestyle. This includes comfort in everyday life and sustainability at the same time.

To what extent has the demand for recycled products increased? Under the brand name &+™, Toray offers a fiber made from recycled PET bottles. Especially with the "raw material base: PET bottles", problems can occur with the whiteness of the fiber. What distinguishes your process from that of other companies and to what extent can you compete with new fibers in terms of quality?

During the production of the "&+" fiber, the collected PET bottles are freed from all foreign substances using special washing and filtering processes. These processes have not only allowed us to solve the problem of fiber whiteness – by using filtered, high-purity recycled polyester chips, we can also produce very fine fibers and fibers with unique cross sections. Our proven process technologies can also be used to incorporate specific textures and functions of Toray into the fiber. In addition, "&+" contains a special substance in the polyester that allows the material to be traced back to the recycled PET bottle fibers used in it.

We believe that this combination of aesthetics, sustainability and functionality makes the recycled polyester fiber "&+" more competitive than those of other companies. And indeed, we have noticed that the number of requests is steadily increasing as companies develop a greater awareness of sustainability as early as the product planning stage.

How is innovation management practiced in Toray's textile division, and which developments that Toray has worked on recently are you particularly proud of?

The textile division consists of three sub-divisions focusing on the development and sale of fashion textiles (WOMEN'S & MEN'S WEAR FABRICS DEPT.), sports and outdoor textiles (SPORTS WEAR & CLOTHING MATERIALS FABRICS DEPT.) and, specifically for Japan, textiles for uniforms used in schools, businesses and the public sector (UNIFORM & ADVANCED TEXTILES DEPT.).

In the past, each division developed its own materials for their respective markets and customers. However, in 2021, we established a collaborative space to increase synergy and share information about textiles developed in different areas with the entire department. In this way, salespeople can also offer their customers materials developed in other departments and get ideas for developing new textiles themselves.

I believe that the new structure will also help us to respond better to changes in the market. We see, for example, that the boundaries between workwear and outdoor are blurring – brands like Engelbert Strauss are a good example of this trend. Another development that we believe will accelerate after the Corona pandemic is the focus on green technologies and materials. This applies to all textile sectors, and we need to work more closely together to be at the forefront of this.

How important are bio-based polyesters in your research projects? How do you assess the future importance of such alternatives?

I believe that these materials will play a major role in the coming years. Polyester is made from purified terephthalic acid (PTA), which again consists of paraxylene (PX) and ethylene glycol (EG). In a first step, we already offer a material called ECODEAR™, which uses sugar cane molasses waste as a raw material for EG production.

About 30% of this at least partially bio polyester fiber is therefore biologically produced, and the material is used on a large scale for sportswear and uniforms. In the next step, we are working on the development of a fully bio-based polyester fiber in which the PTA component is also obtained from biomass raw materials, such as the inedible parts of sugar cane and wood waste.

Already in 2011, we succeeded in producing a prototype of such a polyester fiber made entirely from biomass. However, the expansion of production at the PX manufacturer we are working with has proven to be challenging. Currently, we are only producing small sample quantities, but we hope to start mass production in the 2020s.

Originally starting with yarn, now a leading global producer of synthetic fibers for decades, you also work to the ready-made product. The range extends from protective clothing against dust and infections to smart textiles and functional textiles that record biometric data. What are you planning in these segments?

In the field of protective clothing, our LIVMOA™ brand is our flagship material. It combines high breathability to reduce moisture inside the garment with blocking properties that keep dust and other particles out. The textile is suitable for a wide range of work environments, including those with high dust or grease levels and even cleanrooms. LIVMOA™ 5000, a high quality, also demonstrates antiviral properties and helps to ease the burden on medical personnel. The material forms an effective barrier against bacteria and viruses and is resistant to hygroscopic pressure. Due to its high breathability, it also offers high wearing comfort.

Our smart textile is called hitoe™. This highly conductive fabric embeds a conductive polymer – a polymer compound that allows electricity to pass through - into the nanofiber fabric. hitoe™ is a high-performance material for detecting biosignals, weak electrical signals that we unconsciously emit from our bodies.

In Japan, Toray has developed products for electrocardiographic measurements (ECGs) that meet the safety and effectiveness standards of medical devices. And in 2016, we submitted an application to the Japanese medical administrative authorities to register a hitoe™ device as a general medical device – this registration process is now complete. Overall, we expect the healthcare sector, particularly medical and nursing applications, to grow – not least due to increasing infectious diseases and growing health awareness among the elderly population. We will therefore continue to develop and sell new products for this market.

In 1885, Joseph Wilson Swan introduced the term "artifical silk" for the nitrate cellulose filaments he artificially produced. Later, copper, viscose and acetate filament yarns spun on the basis of cellulose were also referred to as artifical silk. Toray has developed a new innovative spinning technology called NANODESIGN™, which enables nano-level control of the fineness and shape of synthetic fibers. This is expected to create functions, aesthetics and textures that have not existed before. For which applications do you intend to use these products?

In NANODESIGN™ technology, the polymer is split into a number of microscopic streams, which are then recombined in a specific pattern to form a new fiber. By controlling the polymer flow with extreme precision, the fineness and cross-sectional shape of the fiber can be determined much more accurately than was previously possible with conventional microfiber and nanofiber spinning technologies. In addition, this technology enables the combination of three or more polymer types with different properties in one fiber – conventional technologies only manage two polymer types. This technology therefore enables Toray to specify a wide range of textures and functions in the production of synthetic fibers that were not possible with conventional synthetic fibers – and even to outperform the texture and feel of natural fibers. Kinari, our artificial silk developed with NANODESIGN technology, is a prime example here, but the technology holds many more possibilities – especially with regard to our sustainability goals.

What has the past period of the pandemic meant for Toray's textile business so far? To what extent has it been a burden, but in which areas has it also been a driver of innovation? What do you expect of the next 12 months?

The Corona catastrophe had a dramatic impact on the company's results: The Corona catastrophe had a dramatic impact on the company's results: In the financial year 2020, Toray's total sales fell by about 10% to 188.36 billion yen (about 1.44 billion euros) and operating profit by about 28% to 90.3 billion yen (about 690 million euros). The impact on the fiber and textile business was also significant, with sales decreasing by around 13% to 719.2 billion yen (approx. 5.49 billion euros) and operating profit by around 39% to 36.6 billion yen (approx. 280 million euros).

In the financial year 2021, however, the outlook for the fibers and textiles sector is significantly better: So far, the segment has exceeded its goals overall, even if there are fluctuations in the individual areas and applications. In the period from April to June, we even returned to the level of 2019. This is partly due to the recovering sports and outdoor sector. The fashion apparel market, on the other hand, remains challenging due to changing lifestyles that have brought lock-downs and home-office. We believe that a full recovery in business will not occur until the travel and leisure sector returns to pre-Corona levels.

Another side effect of the pandemic that we feel very strongly, is the growing concern about environmental issues and climate change. As a result, the demand for sustainable materials has also increased in the apparel segment. In the future, sustainability will be mandatory for the development and marketing of new textiles in all market segments. Then again, there will always be the question of how sustainable a product really is, and data and traceability will become increasingly important. In the coming years, the textile division will keep a close eye on these developments and develop materials that meet customers' needs.

About the person:
Koji Sasaki joined Toray in 1987. In his more than 30 years with the company, he has held various positions, including a four-year position as Managing Director of Toray International Europe GmbH in Frankfurt from 2016 to 2020. Since 2020, Koji Sasaki has been responsible for Toray's textile division and serves as acting chairman of Toray Textiles Europe Ltd. In these roles, he supervises the company's development, sales and marketing activities in the apparel segment, including fashion, sports and work or school uniforms.

The interview was conducted by Ines Chucholowius, Managing partner Textination GmbH

(c) PERFORMANCE DAYS
16.11.2021

PERFORMANCE DAYS 2021: Hybrid Event in December

From December 1 to 2, 2021, the industry will meet up again live at the trade fair center in Munich. Trade visitors, industry insiders and experts can look forward to inter-personal exchanges, intensive networking, exciting fabric innovations and various other program highlights. The fair will go ahead in strict compliance with the current official hygiene regulations and in close cooperation with the Messe München authorities. Planned as a hybrid event, PERFORMANCE DAYS offers the possibility to follow what is on offer digitally.

From December 1 to 2, 2021, the industry will meet up again live at the trade fair center in Munich. Trade visitors, industry insiders and experts can look forward to inter-personal exchanges, intensive networking, exciting fabric innovations and various other program highlights. The fair will go ahead in strict compliance with the current official hygiene regulations and in close cooperation with the Messe München authorities. Planned as a hybrid event, PERFORMANCE DAYS offers the possibility to follow what is on offer digitally.

Live in Munich: PERFORMANCE DAYS in Hall A6
In Hall A6 on the grounds of the New Trade Center in Munich, trade visitors can look forward to an extensive portfolio of exhibitors showcasing their latest functional textiles and fabric innovations for the upcoming winter season, winter 2023/24. Exhibitors who are unable to present their highlights on site can also be accessed via the PERFORMANCE DAYS LOOP digital platform throughout the course of the fair. As part of the newly developed “remote booths” concept, trade visitors will for the first time also find collections from exhibitors who cannot be in Munich in person for the trade show. Interactive exchanges via chat, call or video call is planned.

Two further PERFORMANCE DAYS fairs are planned as live events: The Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon, USA on November 17-18, 2021 and Functional Textiles Shanghai by PERFORMANCE DAYS on December 6-7, 2021. Registration is open at www.functionalfabricfair.com/ and www.functionaltextilesshanghai.com/

PERFORMANCE FORUM together with USA Fair
As part of the PERFORMANCE FORUM, a select jury of experts assembles for two days prior to the fair to exchange views on the latest fabric innovations for the winter 23/24 season. In order to ensure a more global market overview, the PERFORMANCE FORUM will curate highlights for the first time in conjunction with the US fair in Portland. Consequently, the next fair in Munich will not only feature the latest products from exhibitors at the Munich fair, but also highlights from the fair in Portland. This year’s Focus Topic in cooperation with the Vaude Academy will engage with the topic “The Sustainable Future of Nylon” and a specific hand-chosen selection of fabric materials. Furthermore, as part of the winter fair, the “sustain & innovate” conference on sustainability, organized in close cooperation with SAZsport, will take an in-depth look at the topic comprising all its aspects along with speakers, webinars and discussion rounds. The program will be broadcast live from the fair and thus accessible for all who wish to follow it online in digital form.  

Eco Award and Performance Award for Innovative Winter Fabrics 23/24
This year, in addition to a PERFORMANCE AWARD, the jury also presented an ECO PERFORMANCE AWARD. An integral part of the winter edition of PERFORMANCE DAYS is the presentation of the fabric highlights and accessory trends in the respective categories for the Winter Season 2023/24 at the PERFORMANCE FORUM. The well-known segments will be joined for the first time this winter by the Shoes & Bags category, while the renowned Lifestyle Category will be continued under its new title, “Function Meets Fashion”. The high level of innovation and quality of many of the fabrics submitted this year are particularly striking.

“The fusion of the two PERFORMANCE FORUMs of our fairs in Munich and Portland has lead to a significant increase in quality and innovation. Thanks to the new partnership, not only were we able to get new, exciting manufacturers on board, but there was also a significant increase in participation in general“, says Marco Weichert, CEO of PERFORMANCE DAYS.

Natural fabrics such as organic cotton, wool or canvas remain in demand. These are joined by significantly more plant fibers such as hemp, coconut shell, bamboo or fibers derived from pineapple or banana leaves. The additional use of castor oil, zinc or ginger supports the antibacterial effect, ensures enhanced breathability, optimum temperature management and makes the fabric soft, light and kind to the skin. The topic of recycling presents itself in various new facets and features exciting trends. The portfolio ranges from the recycling of marine waste, such as old buoys, plastic waste or fishing nets, to the recycling of waste from the automotive and computer industries, such as old car tires or computer chips. Natural dyeing methods are also gaining increasing importance, as is the recycling of materials into the textile loop.

In the Marketplace, visitors have the opportunity to view over 13,000+ products from exhibitors, including the fabric highlights of the individual categories at the PERFORMANCE FORUM. In order to be able to present the fabrics to the digital visitors as realistically as possible in terms of feel, design and structure, the PERFORMANCE FORUM has been equipped with groundbreaking 3D technology, including innovative tools such as 3D images, video animations and U3M files for download.

In addition to the PERFORMANCE AWARD WINNER, which goes to drielease/Optimer, there is also an ECO PERFORMANCE AWARD WINNER, awarded to Long Advance.

Completely new look: With the innovative Dricomfort Geo, drirelease turns to a blend of 6 % Lycra, 44 % polyester and 50 % recycled polyester. The processing of the various fibers in the knitting process, in combination with the Dricomfort GEO finishing, makes the reversible interlock fabric unique.

Unique, new pattern and knit designs are possible thanks to a special jacquard knitting process used to process the recycled polyester yarn. The material impresses with its lightness and versatility. The GEO technology also ensures optimal body temperature management. The adaptable technology provides excellent thermal regulation features through efficient heat management and enhanced moisture transport to optimize comfort and performance. Moreover, GEO boasts UV protection up to 50+.

New recycling variant: Long Advance presents LNT-21191-Z4C, a post consumer nylon that opens up a new world to recycling. The fabric, which consists of 7 % elastane and 93% recycled polyamide via Mass Balance, introduces new facets to the topic of recycling. BASF is using tire waste from now on and processes them into a new fiber. fiber. Due to the recycling, the need for synthetic fabrics are reduced to replace petroleum-based plastics with plastics made from renewable raw materials.

Foto: Pixabay
09.11.2021

NGST - Next Generation Protective Textiles

  • Efficient Production of Novel, High-Quality Infection-Protective Textiles

 
Considerable shortages of protective textiles, especially respirators, occurred during the SARS-CoV-2 pandemic, which were exacerbated by the lack of sufficient production capacity in Germany and the EU at the time. Short-term retooling at EU companies as well as importing goods often did not lead to success, as these protective textiles were of highly variable quality, which had a negative impact on safety.

The "Next Generation Protective Textiles" initiative aims to remedy this situation by researching new approaches for the production of high-quality protective textiles.

The "NGST" project is divided into several subtasks
The project includes:

  • Efficient Production of Novel, High-Quality Infection-Protective Textiles

 
Considerable shortages of protective textiles, especially respirators, occurred during the SARS-CoV-2 pandemic, which were exacerbated by the lack of sufficient production capacity in Germany and the EU at the time. Short-term retooling at EU companies as well as importing goods often did not lead to success, as these protective textiles were of highly variable quality, which had a negative impact on safety.

The "Next Generation Protective Textiles" initiative aims to remedy this situation by researching new approaches for the production of high-quality protective textiles.

The "NGST" project is divided into several subtasks
The project includes:

  • qualified selection of basic materials
  • studies on up-scaling to create the conditions for a rapid expansion of production capacities
  • development of novel antiviral coatings
  • comprehensive biological and material science analysis to verify the improved properties and also to open up new methods of quality control.

The protective textiles to be developed in the project have a wide range of applications beyond use in the medical field and in civil protection. In principle, wherever immediate cleaning and disinfection are difficult or special filtration tasks are necessary, such as in mobile or stationary filter systems for air purification or for individual personal protection.

In this project, the Fraunhofer IGCV is researching the development of a manufacturing process for nonwovens as a basis for infection protection and filtration media based on wet nonwoven technology. Compared to the state of the art (meltblown technology), this is potentially characterised by significantly increased production capacities as well as increased flexibility with regard to material variety. The main challenges here are the very high quality requirements based on low basis weights for processing the finest possible micro-staple fibres..
          
Pursuing novel approaches to increase quality and productivity in the production of protective textiles
The aim is to provide optimised nonwoven materials as a starting material for subsequent antiviral coatings, and to assess and demonstrate the high technological potential of wet nonwoven technology in this field of application.

For this purpose, an existing pilot wetlaid nonwoven line was specifically modified on a pilot plant scale. This makes it possible to produce nonwoven materials from micro-staple fibres in the required very high quality in terms of uniformity, basis weight, blending and thickness profile with high reproducibility. A standard PP nonwoven was used as a comparison system, which was produced according to the current state of the art using meltblown technology. In addition to the PP comparison variants, however, the processing of PLA, viscose and PET staple fibres, among others, was also investigated. The focus here is on maximum fibre fineness (microfibres) in each case in order to achieve the largest possible specific fibre surface or effective area in the nonwoven. In order to emphasise the significantly increased flexibility of wetlaid technology, particularly innovative variants based on modified bi-component fibres with maximised fibre surface area as well as split fibres are also being conceptually tested.

In addition to aspects of direct material and process development, the scale of the pilot plant provides a comprehensive data basis for estimating a later scaling up to an industrial series. This should create a technological starting point for the ramp-up of an efficient, national production of fleece-based infection control materials based on wet-laying technology.

Source:

Fraunhofer Institute for Casting, Composite and Processing Technology IGCV

(c) FESPA
02.11.2021

FESPA back with first live events in Europe

FESPA has kick-started business recovery in the speciality print and signage communities with the successful return of FESPA Global Print Expo and European Sign Expo 2021 (12 – 15 October 2021) after a two-year gap.

The first live FESPA events in Europe since Spring 2019 attracted a strong audience dominated by business leaders, who came with an appetite to update their industry knowledge with a view to short- and medium-term investment.

FESPA has kick-started business recovery in the speciality print and signage communities with the successful return of FESPA Global Print Expo and European Sign Expo 2021 (12 – 15 October 2021) after a two-year gap.

The first live FESPA events in Europe since Spring 2019 attracted a strong audience dominated by business leaders, who came with an appetite to update their industry knowledge with a view to short- and medium-term investment.

International audience of senior decision-makers
Visitors came from more than 100 countries, with a strong emphasis on the Benelux region and Germany which accounted for 49% of the audience, in line with expectations given the location in Amsterdam. Other strongly represented countries were Italy, France, the United Kingdom, Spain and Poland. As anticipated, the challenges for long-haul travellers due to COVID-related restrictions resulted in fewer visitors from outside Europe than usual for a Global Print Expo event. In total, the events attracted 7,850 unique visitors, 42% of whom attended for more than one day, bringing total visits to 11,130.

Close to half of all visitors (44%) were owners or managing directors, reinforcing the significance of the event as a springboard for business recovery and forward planning. Two in three visitors influence or make final purchasing decisions in their business.

54% of visitors stated that they were visiting FESPA for the first time, indicating a thirst for market knowledge, insight and inspiration following the commercial challenges of the pandemic.

Sources of inspiration
Printeriors was once again a popular attraction for visitors. Inspired by nature and curated by FESPA’s Textile Ambassador, Debbie McKeegan, the feature highlighted digitally printed applications targeted at printers operating in or looking to expand into interior décor. In collaboration with industry suppliers including Imageco, Kornit Digital, PONGS, swissQprint and TTS, the products displayed were produced using a series of high-end technologies, print processes and materials.

The World Wrap Masters Europe 2021 competition was also a key area of interest. In addition to a series of demonstrations and workshops from wrap experts, visitors saw competitors battle it out for the title of the “World Wrap Master of Europe 2021”. On day four, Norman Brübach from Germany was crowned the winner and will go on to compete against regional champions in the World Wrap Masters Final 2022 at FESPA Global Print Expo 2022 in Berlin.

For members of the community unable to attend the event in person, FESPA and its exhibitors provided an array of live-streamed and virtual content. The FESPA Live sessions involved conversations with key exhibitors, printers and print experts on the latest trends and innovations and these attracted 5,125 views throughout the four-day event. The recordings of the sessions are also still available to watch on demand.

Neil Felton, FESPA CEO comments: “Feedback from exhibitors was effusive, with many commenting on the upbeat mood among visitors, the unmatched value of face-to-face conversations with senior decision-makers, the enthusiasm for the new technologies and consumables on display, and the overriding sense of optimism for the future. The buzz in the halls was energising and the impression was that delegates felt very confident and happy to be in a live event environment again after such a long time.”

Neil Felton concludes: “The past two years have undoubtedly been challenging for everyone in our community. To move forward, printers and signmakers need to unearth new opportunities, explore the latest technologies and meet with peers to share ideas. This year’s events were an important milestone in our collective recovery and we hope that our next Global Print Expo and European Sign Expo, which will return to Messe Berlin, Germany, from 31 May – 3 June 2022, will finally put our whole global community back in motion.”

(c) Messe Düsseldorf / ctillmann
26.10.2021

A+A 2021: Restart for Trade Fairs in Düsseldorf

  • World's leading trade fair for safe and healthy working offers central platform for personal exchange within the industry

The responsible handling of the issues of safety and health at work has once again moved into the focus of society and politics due to the pandemic. At A+A 2021, which begins on 26, October 2021, these topics have been the focus since its premiere. Under the motto "People matter", A+A 2021 will present everything to do with personal protection, occupational safety and health at work from 26 to 29 October. More than 1,200 exhibitors from 56 nations will present themselves to trade visitors in 10 halls at the Düsseldorf exhibition centre.

  • World's leading trade fair for safe and healthy working offers central platform for personal exchange within the industry

The responsible handling of the issues of safety and health at work has once again moved into the focus of society and politics due to the pandemic. At A+A 2021, which begins on 26, October 2021, these topics have been the focus since its premiere. Under the motto "People matter", A+A 2021 will present everything to do with personal protection, occupational safety and health at work from 26 to 29 October. More than 1,200 exhibitors from 56 nations will present themselves to trade visitors in 10 halls at the Düsseldorf exhibition centre.

"The anticipation for the fair was great. This year we were particularly looking forward to the personal exchange with the industry. The positive exhibitor feedback confirms that the players in occupational health and safety want a live platform. And with the A+A we deliver what only a trade fair can offer. Tactile product presentations and innovations as well as planned and accidental encounters with the entire industry," says Birgit Horn, Project Director A+A.

Exciting topics and best practices at the A+A Congress
Parallel to the A+A trade fair, the 37th International Congress for Occupational Safety and Health deals with numerous current topics and challenges of the scene. It is organised by the Federal Working Group for Safety and Health at Work (Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit, Basi). In more than 25 series of events, well-founded specialist knowledge and current political topics are conveyed and intensively discussed for all stakeholders in matters of safety and health at work, on site and in some cases also digitally. "Even the opening event will be interesting. Social partners and other stakeholders will discuss the impact of the pandemic on occupational safety and health and the return to the 'new normal' that is now beginning," says Basi Managing Director Dr Christian Felten.

At the A+A Congress, renowned experts from the field of occupational safety and health will provide answers to central questions such as: How does the digitalisation of work affect the health and safety of employees? How do I, as an occupational safety specialist, advise companies and employees on this? How should decentralised workplaces be managed in a safe and healthy way? How do you determine a healthy balance between mobile and stationary work? What is the need for occupational prevention in the case of musculoskeletal stress and what is the current need for prevention in the case of activities involving carcinogenic hazardous substances and bio-substances? There are many interesting events on this and many other topics, further information can be found at www.basi.de/kongress. .

Trend topics at the A+A 2021
Digital performance and sustainability determine the current discussion and will continue to strongly influence the future of work. In addition to these two megatrends at A+A 2021, the focus of the framework programme is on solutions for the future (Future Solutions), new working worlds (New Work) and the topic of hygiene and pandemics.

A+A Live: Experience safe and healthy work with all senses
Best practices using state-of-the-art products and processes will be communicated under the label "A+A live" in the Trend Forum, the Theme Park Operational Fire Protection and Emergency Management, the Robotics Park and the Start UP Zone.

In Hall 10, trade visitors will find the Safety and Health Meeting Point, the competence centre for all occupational health and safety issues. This is where Basi's member and partner organisations present themselves..

The Robotics Park is also located in Hall 10, it is divided into the Self Experience Space and the Exoworkathlon. The partner of the Robotics Park is the Fraunhofer IPA from Stuttgart.
In the Self Experience Space, the following manufacturers of exoskeleton solutions will be presenting their products, which visitors can try out for themselves:  Ottobock SE & Co. KGaA, Japet Medical Devices SAS, Iturri, German Bionic Systems GmbH, Ergoschutz GmbH, suitX Inc, hTRIUS GmbH, Levitate Technologies Inc. and Laevo B.V.

The Exoworkathlon is a live study conducted by the Fraunhofer Institute for Manufacturing Engineering and Automation (IPA) and the Institute for Industrial Manufacturing and Management at the University of Stuttgart (IFF) in which young test subjects (trainees and technical students) run through a course once with and once without an exoskeleton. The data collected during the Exoworkathlon is used to scientifically evaluate the extent to which these exoskeletons reduce muscular and skeletal strain and increase performance.

In Hall 4, expert lectures on the topics of digitalisation + safety, digitalisation + health, sustainability, protection and hygiene as well as safe handling of hazardous substances will provide an insight into current developments in the Trend Forum.

The Corporate Fashion Lounge is located in Hall 5. Here, trade visitors can find out about the latest trends in fashionable workwear and experience how versatile modern workwear is today. At the same time, the lounge provides an outlook on the future role that corporate fashion will play at the trade fair from A+A 2023 onwards.

In Hall 6, trade visitors will find the action area on industrial fire protection and emergency management, organised by the Bundesverband Betrieblicher Brandschutz / Werkfeuerwehrverband Deutschland (WFVD). Several live demonstrations will simulate the use of chemical protective suits (CSA) in the event of the escape of toxic substances in the event of an accident and demonstrate the correct prevention.

More information:
A+A
Source:

Messe Düsseldorf

Foto: Pixabay
12.10.2021

Making companies crisis-proof: Resilience as an extended security concept

Companies today face a variety of increasingly complex risks. Not least the pandemic has shown how crises can pose an existential threat to companies. The FReE tool of the Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, EMI, allows companies to measure their resilience and subsequently be prepared for upcoming crisis scenarios.
 

Companies today face a variety of increasingly complex risks. Not least the pandemic has shown how crises can pose an existential threat to companies. The FReE tool of the Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, EMI, allows companies to measure their resilience and subsequently be prepared for upcoming crisis scenarios.
 
Our world is highly complex and prone to disruption: Natural disasters, cyberattacks, power outages, terrorist attacks, pandemics and other crisis scenarios can threaten companies existentially. The corona pandemic has shown us how vulnerable the German economy really is: According to the Federal Statistical Office, in 2020 the economy fell into a deep recession after ten years of growth; especially in the second quarter of 2020, economic output saw a historic slump. There will be other crises after this pandemic. The classic methods of risk analysis and risk management, which only take into account expected risks, do not adequately protect companies against major losses.

“Companies often only consider the most likely scenarios rather than focusing on possible crisis events,“ says Daniel Hiller, Head of business unit Security and Resilience at Fraunhofer EMI in Freiburg. Teams at Fraunhofer are establishing resilience as a new security concept to help prepare organizations and companies for crises. The results of their research work include the online tool Fraunhofer Resilience Evaluator FReE and the KMU-Lagebild software, both designed to enable companies to measure and evaluate their resilience and to carry out a resilience analysis before, during and after a disruptive event.
 
The five-stage concept “Prepare, Prevent, Protect, Respond and Recover”
The online tool FReE allows companies to plan resilience strategically, to implement the abstract concept in their company and to put it into practice on management level. FReE is based on the five-stage concept “Prepare, Prevent, Protect, Respond and Recover.”  

The software comes with a list of 68 questions related to the five resilience stages. The answers provide the company with some initial information needed to assess resilience. The five stages are ordered chronologically, starting with a what-if scenario. During this Prepare stage companies prepare for disruptive situations, which helps avert damage using preventive measures during the Prevent stage.

“An aluminum processing plant, for example, might want to protect its premises with security fences and cameras, because thieves usually break in at night to steal aluminum,“ says Hiller, illustrating the first two stages using a classic example. The Protect stage, as the name suggests, aims to protect; this might include safeguarding important infrastructures or buildings with additional concrete layers or walls. If it was not possible to stave off the disaster, the Respond stage comes into play. It is now important to quickly identify the cause and extent of the damage and to preserve critical supply functions. After the incident, companies should systematically draw lessons from the crisis in order to be better able to avert future risks and to boost their resilience in a cyclical iterative process – researchers call this stage Learn and Adapt.
 
The FReE tool takes the user through the list of questions, which are ordered chronologically into the sections before, during and after a disruption and cover all company divisions. These including personnel, finance, infrastructure and technology. The tool allows you to filter by division during the evaluation process. “For example, a controller can set the filter such that only results related to finance are shown,” says Hiller. Possible questions include: “Is there a disaster manager in the event of a disruption?“, “What are their qualifications and powers?” or “What are the financial reserves for emergencies?” The evaluation is shown in the radar chart, with the worst result being at zero percent in the graticule.

FReE is available in three versions: The free web-based quick version includes 15 questions. The full version, which includes the complete list of 68 questions, is available on a project basis. The accompanying consulting project is based on the paid version. As part of the consulting project, Hiller and his team work together with the companies to develop appropriate measures to boost resilience and eliminate weak spots. Furthermore, additional questions can be added to the FReE tool to adapt it to the needs of specific industries. Many SMEs are already using the quick version and are planning to update it to the full version.

KMU-Lagebild project
While FReE enables companies to assess their resilience on their own, the KMU-Lagebild project supports them in carrying out a comprehensive resilience assessment. The researchers model all procedures and processes on the computer using the available data. By inputting hypothetical disruption scenarios, you can see how the system reacts to them and which countermeasures have to be taken. “By asking yourself not only what the most likely disruptions are, but also what potential incidents there are, you broaden your view of the risks. What’s more, resilient companies exhibit a high level of adaptability and flexibility,” says Hiller in summary.

More information:
SMEs resilience corona crisis
Source:

Fraunhofer-Institut für Kurzzeitdynamik, Ernst-Mach-Institut, EMI [Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, EMI]

(c) Messe Frankfurt Exhibition GmbH or Messe Frankfurt GmbH
05.10.2021

Heimtextil 2022: International Reunion eagerly awaited

Meeting business partners, discovering new products and gaining inspiration – all will be possible again when Heimtextil 2022 opens its doors in Frankfurt am Main from 11 to 14 January. With registrations from around 1,600 exhibitors from 50 countries, the Trade Fair for Home and Contract Textiles anticipates a highly promising return to the international stage. The Heimtextil Team has begun the decisive preparatory phase for this international meeting place for the sector with great commitment and enthusiasm.

Meeting business partners, discovering new products and gaining inspiration – all will be possible again when Heimtextil 2022 opens its doors in Frankfurt am Main from 11 to 14 January. With registrations from around 1,600 exhibitors from 50 countries, the Trade Fair for Home and Contract Textiles anticipates a highly promising return to the international stage. The Heimtextil Team has begun the decisive preparatory phase for this international meeting place for the sector with great commitment and enthusiasm.

“With four months still to go, there has been a tremendous response to Heimtextil 2022, especially from the international side. The yearning for personal encounters and the chance to examine the latest products in reality is greater than ever before. We are looking forward very much to welcoming the sector back to our fair and exhibition centre and have complete confidence that Heimtextil 2022 will be a safe and successful event for all concerned”, says Olaf Schmidt, Vice President Textiles & Textile Technologies, Messe Frankfurt.

Trendsetting themes and a multifaceted product spectrum
In addition to the extensive spectrum of products to be seen, Heimtextil 2022 will offer inspiration and an attractive range of information services and events to help visitors discover the latest market developments in the sector. In particular, the presentation of the Heimtextil Trends provides in-depth insights into tomorrow’s furnishing themes. Also at Heimtextil, Interior.Architecture.Hospitality will spotlight offers for (interior) architects and hospitality experts. Moreover, particular emphasis will be given to the on-trend subject of healthy sleep, including numerous advisory services and products for the specialist bed trade. In this connection, the Heimtextil Sleep & More Conference will be a meeting place for representatives of the specialist bed trade with a high-grade programme of lectures, discussions and product presentations to choose from. Another important focal point at Heimtextil 2022 will be far‑reaching aspects for greater sustainability. Naturally, detailed information will also be available about this topic. Other highlights include presentations by Trevira and DecoTeam.

Digital services to supplement the trade fair
The range of products and information at Heimtextil 2022 will be rounded off by a blend of digital services. For example, the complete spectrum of Heimtextil Trends will be available for the first time in digital form – richly illustrated and visualised with the latest colours, designer features and short films. The Future Materials Library is also online with a first-class selection of sustainable material innovations. Also in planning are videos on demand about many of the items on the programme and tours of the fair via audio guides.

Another digital service provided by Messe Frankfurt is the order and data-management portal Nextrade, which offers a digital 24/7 business relationship between dealers and suppliers. The first digital B2B marketplace for the home and living, Nextrade brings together the demand and supply sides of the whole sector online and thus generates substantial value added for both sides.

(c) Checkpoint Systems
28.09.2021

Checkpoint Systems: Retail Technology Solutions – Success needs a Team

Checkpoint Systems, a division of CCL Industries, is a global leader in retail solutions. The portfolio ranges from electronic article surveillance as well as theft and loss prevention to RFID hardware and software and labeling solutions. The aim is to provide retailers with accurate, real-time inventory, speed up the replenishment cycle, prevent out-of-stocks and reduce theft to improve product availability and the customer shopping experience.

Checkpoint Systems, a division of CCL Industries, is a global leader in retail solutions. The portfolio ranges from electronic article surveillance as well as theft and loss prevention to RFID hardware and software and labeling solutions. The aim is to provide retailers with accurate, real-time inventory, speed up the replenishment cycle, prevent out-of-stocks and reduce theft to improve product availability and the customer shopping experience.

Textination spoke with Miguel Garcia Manso, Business Unit Director Germany at Checkpoint Systems, where the 44-year-old industrial engineering graduate has been working since 2018. With many years of international retail experience, he knows the needs of the retail industry very well. Before that, Miguel Garcia Manso lived in Madrid for almost 15 years, where he worked for the Spanish food retailer DIA. There he also accompanied the introduction and roll-out of article surveillance projects.

 

If you had to present Checkpoint Systems and its portfolio to someone who is not a retail professional – what would you say?

We are the retail partner and our job is to help retailers make shopping as pleasant as possible for their customers. Put simply, our solutions ensure that the right product is in the right place at the right time when the end consumer wants to buy it, instead of standing in front of an empty shelf in the worst-case scenario. Our portfolio ranges from individual anti-theft products to solutions that cover the entire supply chain and provide the greatest possible transparency of inventory.

 

It's been a long journey from the 1960s, when a small team in the U.S. developed a method to prevent the theft of books from public libraries, to becoming the international leader in 21st century article surveillance, operating in 35 countries. What legacy is still important to you today, and how would you describe the spirit at Checkpoint Systems?
 
Both questions have the same answer: On the one hand, innovative strength and, on the other, consistent exchange with the retail industry. Both have been in the focus at Checkpoint Systems from the very beginning. We develop our products and systems in close exchange with the industry, actively seek dialogue, listen to what is needed in everyday life, etc. This is very important to us and is also regularly used as a selling point for Checkpoint Systems. We definitely want to continue this.

 

You offer hardware and software technologies for retail, which is a very complex market. How do the requirements of retailers from the fashion, outdoor and textile industries differ from those of other industries?

The reasons why retail companies contact us are similar across all industries. They all want to delight their customers, retain them in the long term, and generate more sales. The ways to achieve this may differ: From omni-channel strategies for the fashion sector, to article surveillance solutions for high-priced electrical or cosmetic products, and to RFID-based fresh food solutions for food retailers to reduce food waste.
The requirements of the industries differ, especially when it comes to labels. Depending on the size and price of the product as well as the desired technology, we recommend different labels – or develop them in close coordination with the customer. For the Polish fashion company LPP, for example, we have just developed a special dual RF and RFID tag that blends harmoniously into the store design.

 

Magic word RFID – the contactless and automated reading and storing of data based on electromagnetic waves is the centerpiece of your technologies. You even encourage your customers to develop their own RFID strategy. What do you mean by this and are you sure that all retail companies will be able to do this on their own?

We develop the strategy together with our customers, usually as part of a pilot project. Until a few years ago, the introduction of RFID technology was actually more complex and usually involved a project lasting several years. Today, however, we can quickly calculate for each retailer in the context of a small pilot project, how much more profitable they can be with RFID and what their return on investment is. We usually start with a store scan, followed by pilot testing in selected stores, including individual training and on-site support. And by the time it is implemented in all stores, the customers themselves are RFID experts and have an understanding of what they can do with the real-time data. 

 

What does the keyword "customized" mean for Checkpoint Systems? To what extent can you map the individual needs of each customer? Or can you make every retail company – whether chain or boutique – "happy"?

We give high priority to personalized solutions. This concerns, on the one hand, the product itself and, on the other, the size of the company. As you already indicate, large retail chains obviously have different needs than small boutiques. For O₂, Telefónica Germany’s core brand, for example, we have just specially adapted our AutoPeg tags for theft protection. Instead of the standard yellow, the tags for O₂ are white with blue lettering to match the store design.
This also shows the development in the area of article surveillance in general: When article surveillance was still in its infancy, antennas and labels were mainly functional. Nowadays, they blend harmoniously into the overall look of the store design. Retailers no longer have to choose between design and functionality.

 

How is innovation management practiced in your company and which developments that Checkpoint has worked on recently are you particularly proud of?

In recent months, we have worked intensively – together with the German Employers' Liability Insurance Association (Berufsgenossenschaft Handel und Warenlogistik) – on the testing and certification of our article surveillance systems and now we can proudly say: We are the first manufacturer in Germany whose EAS systems have been tested by the CSA Group, an internationally recognized and accredited provider of testing and certification services. The CSA Group has confirmed that our radio frequency-based EAS systems comply with all standards and guidelines applicable in Germany with regard to exposure to electromagnetic fields. No safety distances need to be maintained.
The background is as follows: Retailers in Germany are obliged to prepare a risk assessment if they use an EAS system. The CE declaration of conformity, which they receive from the manufacturer when purchasing an EAS system, is not sufficient for this purpose. By testing our systems, we have created the best conditions for our customers to make such an assessment. We have also provided the relevant documents to the Employer's Liability Insurance Association.

We are also proud of the fact that we have managed to increase the clearance widths of our NEO antennas for article surveillance from two meters to 2.70 meters. This gives retailers significantly more freedom in store design. In general, store design is also a good keyword at this point: With our free-standing antennas, the design of the NS40 or even the possibility of incorporating antennas into checkout systems, we have contributed a great deal to making article surveillance aesthetically pleasing and harmoniously integrated into the whole.

 

The Covid-19 period was a disaster, especially for the stationary retail. In recent months, companies have increasingly moved in the direction of e-commerce – whether via individual store solutions or marketplaces – in order to compensate for at least part of the decline in sales. What is your advice to retailers: Can only omni-channel businesses be successful today and in the future?

Yes, that is definitely our advice to retailers. Omni-channel solutions are not going to disappear, but will continue to become more common and will be indispensable in the near future. Retailers are well advised to adapt to this new situation – also regardless of Corona – and to invest in the expansion of functioning omni-channel solutions. Customers expect the product they want, to be available when they enter a store. And if not, that they can easily have it delivered to the same store or shipped to their home. This only works with very high inventory transparency, for example through our RFID solutions.

 

Keyword: economic efficiency. Creating the much-vaunted personalized perfect shopping experience for the customer costs money, doesn't it? Stock availability, reducing inventories through clearance sales, shelf management, logistics and returns processing – to what extent can you support retailers in increasing their profitability?

NOT creating the perfect shopping experience costs a lot more – dissatisfied customers who haven't found what they want won't come back. To keep up with customer demand, many retailers therefore stock far too much products. In our experience, this amounts to an average of 42,000 items. That costs. These retailers pay high costs for warehouse space, need a lot of time for inventory processes, and end up having to reduce products significantly in order to reduce inventories.
The key to greater profitability lies in inventory accuracy. With the help of RFID technology, we can increase this to up to 99 percent. This allows us to avoid under- or overstocking, reduce the amount of storage space required, and optimize processes, including inventory. RFID can read hundreds of tags simultaneously and is more accurate and faster than manual counting. Experience shows that retailers can increase their sales by an average of three percent with our RFID technology.

 

Even if the situation in retail has eased to some extent as a result of the vaccinations, the shopping situation in on-site stores – viewed optimistically – also requires special precautions, at least for the next few months. With "safer shopping," you offer a package of various components for this purpose. What does it cover?
 
SmartOccupancy is our simple solution for controlling the number of people in salesrooms in real time. The system counts the number of people entering and leaving using Visiplus 3D, an overhead people counting sensor. When the maximum capacity is almost reached, SmartOccupancy sends an alert to the staff. This allows the staff to respond to current occupancy counts in real time, contributing to a safer environment for employees and customers. Those responsible can use SmartOccupancy to implement official instructions on the maximum number of people safely and reliably; manual counting is no longer necessary. A visual capacity indicator clearly shows customers at the door whether they are allowed to enter the store or not.
The second solution is primarily of interest to the textile and clothing industry as well as the footwear market: Inventory Quarantine is a software solution for secure, automated returns (SaaS-based). It allows retailers to park returned goods in an automated quarantine queue for a few hours. After the pre-defined time has passed, Inventory Quarantine notifies employees via push message that the piece of clothing or shoe can be cleared back to the floor or re-tagged as available in the online store. This means that items are only released when they are deemed safe for resale – while ensuring that items are put back on sale promptly. The solution helps retailers keep track of returned goods and minimize the time when products are not available on sale.

 

"Ethical consumption has finally become an attitude and has arrived in the middle of society," trend researcher Peter Wippermann commented on the results of the Otto Group's latest trend study "Living More Consciously". What does sustainability mean to Checkpoint Systems as a company, how do you reflect this finding in your product portfolio and how do you support your customers in achieving sustainability goals?

Sustainability is definitely an important topic for us at Checkpoint Systems. We regularly review our products and processes to see how we can work even more resource-efficiently, reduce production waste and lower our CO2 emissions. This also includes, how we can further reduce the power consumption of our antennas. We only develop and sell RF antennas. This technology is not only safer in terms of exposure to electromagnetic fields, but also more environmentally friendly: RF antennas require 40 to 70 percent less energy than other technologies.

Source:

The Interview was conducted by Ines Chucholowius, Managing Partner, Textination GmbH.