Textination Newsline

• Current crises are dampening mood in composites industry
• Pessimistic outlook
• Subdued investment climate
• Varying expectations for application industries
• GRP is still a growth driver
• Composites Index continues to decline

This is the 19th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK, Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.

As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future developments in the market.

Current crises are dampening mood in composites industry
Both the economy in general and industry in particular are struggling with numerous challenges at the moment. The Covid-19 pandemic has now had a negative impact for over two years and is still affecting a range of segments of the composites industry. One area that has been hit especially hard by the resulting losses is the mobility sector. Another major strain has been a sharp rise in energy costs recently. Above all, we can expect price increases in fuel and gas to become a central issue over the next few months. In addition, there are still problems along international supply chains, coupled with steep increases in raw material prices, partly due to bottlenecks in the supply. The war in Ukraine has put an additional strain on many business sectors, affecting their supply chains, in particular.

In the current survey, both these and other effects have had a major negative impact on the mood in the composites industry.

The assessment index for the current general economic situation is showing a clear decline.

Compared to the last survey, the assessment of the respondents’ own business situations has dropped significantly and for the first time in eighteen months. However, this decline has been far less severe than during the onset of the Covid-19 pandemic.

Pessimistic outlook
Furthermore, there has been a substantial decline in expectations for the future market development. The key figures for the general economic situation have been declining sharply and have reached an all-time low since the beginning of the survey. The respondents are also less optimistic about future expectations for their own companies.

However, respondents are less extreme when assessing the business situations of their own companies. Despite negative spikes, this curve is far less steep, showing that respondents are expecting less dramatic effects on their own companies than on the industry as a whole.

Subdued investment situation
Although, as expected, the investment climate has also become subdued, it should be noted that, in all, expectations are still relatively high. 70% of all respondents believe that machine investments are possible, or they are planning for it. This figure is somewhat lower than in the previous market survey, but it shows a far less dramatic development than the other factors mentioned above .

Varied expectations for application industries
We already mentioned the high level of heterogeneity of applications in the composite sector. In the survey, respondents were asked to provide assessments of market developments in various core sectors.

Their expectations clearly differ substantially from one another.

The proportion of pessimistic expectations has generally been rising for all application industries. While these expectations are almost entirely within a single-digit range, there has been a clear rise in the proportion of those expecting a deterioration of the market in the various application industries. Similar to the last surveys, major drops are expected above all for the automotive, aviation and mechanical engineering sectors. For the first time, however, we can now also see rather negative expectations on the infrastructure and building sector. Yet this is a segment which often reacts quite slowly to temporary economic fluctuations and has so far shown itself to be relatively resilient towards the above-mentioned crises. It remains to be seen whether such forebodings will come true, or whether the construction industry will continue to hold its own in the face of the current negative forces.

Growth drivers remain stable
Geographically, the survey shows that the most important growth stimuli for the composites segment are expected to come from Germany, Europe and Asia.

Where materials are concerned, we are seeing a continuation of the ongoing paradigm shift. Whereas, in the first 13 surveys, respondents always mentioned CRP as the material with the most important growth drivers in its environment, the most important stimuli are now being expected to come consistently either from GRP or from all materials.

Composites Index continues to decline
The industry is currently going through an extremely tense and difficult period, characterised by rising costs, supply chain issues, lack of availability of certain semifinished products and raw materials, increasing political instability and very pessimistic expectations for the future. All the relevant indicators of the current composites survey are pointing downwards at the moment. After some slight recovery over the last 18 months, the Composite Index has therefore clearly been weakening this time and has been dropping to new low points, especially concerning future expectations.

Industry in general, but particularly also Germany’s composite industry, has always shown itself to be very resilient towards crises and has often cushioned negative developments quickly. The total production volume for composites in Europe last year already reached its pre-crisis level of 2019. Germany continues to be the most important manufacturing country in Europe, with a market share of nearly 20%. Hopefully, the slowdown in the coming months will be less severe than expected and the composites industry will remain on an upward trajectory. We will continue to be optimistic, as composites are highly diverse and therefore a key material of the future.

The next Composites Market Survey will be published in January 2023.

From December 1 to 2, 2021, the industry will meet up again live at the trade fair center in Munich. Trade visitors, industry insiders and experts can look forward to inter-personal exchanges, intensive networking, exciting fabric innovations and various other program highlights. The fair will go ahead in strict compliance with the current official hygiene regulations and in close cooperation with the Messe München authorities. Planned as a hybrid event, PERFORMANCE DAYS offers the possibility to follow what is on offer digitally.

Live in Munich: PERFORMANCE DAYS in Hall A6
In Hall A6 on the grounds of the New Trade Center in Munich, trade visitors can look forward to an extensive portfolio of exhibitors showcasing their latest functional textiles and fabric innovations for the upcoming winter season, winter 2023/24. Exhibitors who are unable to present their highlights on site can also be accessed via the PERFORMANCE DAYS LOOP digital platform throughout the course of the fair. As part of the newly developed “remote booths” concept, trade visitors will for the first time also find collections from exhibitors who cannot be in Munich in person for the trade show. Interactive exchanges via chat, call or video call is planned.

Two further PERFORMANCE DAYS fairs are planned as live events: The Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon, USA on November 17-18, 2021 and Functional Textiles Shanghai by PERFORMANCE DAYS on December 6-7, 2021. Registration is open at www.functionalfabricfair.com/ and www.functionaltextilesshanghai.com/

PERFORMANCE FORUM together with USA Fair
As part of the PERFORMANCE FORUM, a select jury of experts assembles for two days prior to the fair to exchange views on the latest fabric innovations for the winter 23/24 season. In order to ensure a more global market overview, the PERFORMANCE FORUM will curate highlights for the first time in conjunction with the US fair in Portland. Consequently, the next fair in Munich will not only feature the latest products from exhibitors at the Munich fair, but also highlights from the fair in Portland. This year’s Focus Topic in cooperation with the Vaude Academy will engage with the topic “The Sustainable Future of Nylon” and a specific hand-chosen selection of fabric materials. Furthermore, as part of the winter fair, the “sustain & innovate” conference on sustainability, organized in close cooperation with SAZsport, will take an in-depth look at the topic comprising all its aspects along with speakers, webinars and discussion rounds. The program will be broadcast live from the fair and thus accessible for all who wish to follow it online in digital form.  

Eco Award and Performance Award for Innovative Winter Fabrics 23/24
This year, in addition to a PERFORMANCE AWARD, the jury also presented an ECO PERFORMANCE AWARD. An integral part of the winter edition of PERFORMANCE DAYS is the presentation of the fabric highlights and accessory trends in the respective categories for the Winter Season 2023/24 at the PERFORMANCE FORUM. The well-known segments will be joined for the first time this winter by the Shoes & Bags category, while the renowned Lifestyle Category will be continued under its new title, “Function Meets Fashion”. The high level of innovation and quality of many of the fabrics submitted this year are particularly striking.

“The fusion of the two PERFORMANCE FORUMs of our fairs in Munich and Portland has lead to a significant increase in quality and innovation. Thanks to the new partnership, not only were we able to get new, exciting manufacturers on board, but there was also a significant increase in participation in general“, says Marco Weichert, CEO of PERFORMANCE DAYS.

Natural fabrics such as organic cotton, wool or canvas remain in demand. These are joined by significantly more plant fibers such as hemp, coconut shell, bamboo or fibers derived from pineapple or banana leaves. The additional use of castor oil, zinc or ginger supports the antibacterial effect, ensures enhanced breathability, optimum temperature management and makes the fabric soft, light and kind to the skin. The topic of recycling presents itself in various new facets and features exciting trends. The portfolio ranges from the recycling of marine waste, such as old buoys, plastic waste or fishing nets, to the recycling of waste from the automotive and computer industries, such as old car tires or computer chips. Natural dyeing methods are also gaining increasing importance, as is the recycling of materials into the textile loop.

In the Marketplace, visitors have the opportunity to view over 13,000+ products from exhibitors, including the fabric highlights of the individual categories at the PERFORMANCE FORUM. In order to be able to present the fabrics to the digital visitors as realistically as possible in terms of feel, design and structure, the PERFORMANCE FORUM has been equipped with groundbreaking 3D technology, including innovative tools such as 3D images, video animations and U3M files for download.

In addition to the PERFORMANCE AWARD WINNER, which goes to drielease/Optimer, there is also an ECO PERFORMANCE AWARD WINNER, awarded to Long Advance.

Completely new look: With the innovative Dricomfort Geo, drirelease turns to a blend of 6 % Lycra, 44 % polyester and 50 % recycled polyester. The processing of the various fibers in the knitting process, in combination with the Dricomfort GEO finishing, makes the reversible interlock fabric unique.

Unique, new pattern and knit designs are possible thanks to a special jacquard knitting process used to process the recycled polyester yarn. The material impresses with its lightness and versatility. The GEO technology also ensures optimal body temperature management. The adaptable technology provides excellent thermal regulation features through efficient heat management and enhanced moisture transport to optimize comfort and performance. Moreover, GEO boasts UV protection up to 50+.

New recycling variant: Long Advance presents LNT-21191-Z4C, a post consumer nylon that opens up a new world to recycling. The fabric, which consists of 7 % elastane and 93% recycled polyamide via Mass Balance, introduces new facets to the topic of recycling. BASF is using tire waste from now on and processes them into a new fiber. fiber. Due to the recycling, the need for synthetic fabrics are reduced to replace petroleum-based plastics with plastics made from renewable raw materials.

• Highly positive rating of current business situation
• Future expectations are optimistic
• Varied expectations for application industries
• Still the same growth drivers

This is the seventeenth time that Composites Germany has identified the latest KPIs for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK (Industrievereinigung Verstärkte Kunststoffe e.V.), Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.

As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future market developments.

Highly positive rating of current business situation
After ratings of the current business situation had been steadily declining for nearly two years in succession, last year’s survey already displayed a trend reversal towards a more positive outlook. This positive trend has now continued in the latest survey, with entirely positive ratings for all three regions (Germany, Europe and worldwide). For ex-ample, 80% described the current general business situation as either positive or indeed very positive.

Moreover, unlike in the last survey, this more optimistic assessment applies not only to the general business situation, but also to the respondents’ own businesses, as they gave even more positive ratings than last year.     

There are currently quite a few challenges in the industrial environment. In many cases, the Covid-19 pandemic, for example, has merely receded, but has not disappeared.      
Business models have been and are still requiring adjustments. In some cases, supply chains have been severely disrupted and there are still some serious bottlenecks. The blockage of the Suez Canal by the Ever Given has once again highlighted the vulnerability of international commerce.

Shortages of raw materials, sharp increases in the prices of many raw materials and, most recently, a shortage of chips are having a major impact on various application industries. Nevertheless, the overall picture in the composites in-dustry is extremely optimistic. Similarly positive ratings were last achieved in the autumn 2018 and spring 2019 surveys.

Future expectations are optimistic
The positive prevailing mood is further reinforced by positive expectations for the future. A consistently optimistic picture emerged when respondents were asked about their ex-pectations for future business developments. For example, more than 80% of respond-ents are expecting the business situation in Europe to improve over the next six months. The pattern is similar for the other regions.

Varied expectations for application industries
Expectations on selected application industries vary substantially. As in the previous survey, significant declines are expected, above all, in automotive, aviation and wind energy. However, we can see that the proportion of respondents giving more pessimistic assessments has once again declined significantly.
Whereas, in the last sur-vey, 46% were expecting to see the situation get worse in aviation, this value has now dropped to a “mere” 17%. In the automotive sector, it has dropped from 17% (second half of 2020) to only 14%.

Two areas of application, in particular – infrastructure/construction and sports/leisure – have long been seen by many respondents as major growth stimulants for the composites industry. Even in times of a more difficult industrial environment, these two areas are currently proving to be especially robust.

GRP is still a growth driver
As before, the current market survey shows Germany, Europe and Asia as the global regions expected to deliver the most important growth stimuli for the composites segment. Expectations for Asia, on the other hand, have declined somewhat in favour of Europe. Where materials are concerned, we are seeing a continuation of the ongoing paradigm shift.      

Respondents are still convinced that CRP (carbon fibre reinforced plastic) is losing ground as a growth driver. However, GRP (glass fibre reinforced plastic) is now ranking as the most important material for the third time in succession. A large number of respondents have also mentioned the area entitled “Across All Segments” this time.

Composites are still relatively young materials with a great deal of potential. It remains exciting to see to what extent composites will continue to emerge as alternative materials and whether they can benefit from the major forthcoming developments (e.g. alternative drives, a growing demand for sustainability, alternative power sources, 5G, etc.).
The next Composites Market Survey will be published in January 2022. 

Circular instead of throwaway economy - from fast fashion to zero-waste philosophy. The key elements of the circular economy in the fashion business are: Avoiding waste and pollution through new processes, continuous recycling of products and materials, and regeneration of natural systems. Textination talked with Olaf Schmidt, Vice President of Textiles & Textile Technologies, and Thimo Schwenzfeier, Show Director of Neonyt, from Messe Frankfurt about the Neonyt trade show as a business and communication platform for circularity & fashion.
 
It has been about 10 years since Messe Frankfurt ventured onto the "sustainable" fashion trade show stage. Initially with the Ethical Fashion Show, then with the Greenshowroom, there were two trade show formats in Berlin dedicated to the topic of green fashion. What prompted you as a trade show organizer to launch such a special format in Germany at that time?

Olaf Schmidt: Messe Frankfurt's Texpertise Network brings together the world's most important textile trade shows - at around 60 events worldwide, we show what drives the textile and fashion industry. We present the current topics and trends and set impulses for the entire textile value chain. Messe Frankfurt recognized the need for a suitable platform for the future topic of sustainability at an early stage. It was therefore obvious to expand our expertise in the field of fashion and to meet the demand from this segment. To achieve this, we have adapted and realigned existing formats: After launching the Ethical Fashion Show in Paris in 2004, Messe Frankfurt France took over the event in 2010. Two years later, Messe Frankfurt founded the Ethical Fashion Show Berlin in Germany and found, with the moving of the event to the polarizing capital, the ideal location for the coming years. Messe Frankfurt merged the already existing Greenshowroom with the Ethical Fashion Show, and from January 2015 the two shows took place in one venue. For Messe Frankfurt, hosting these events was the next logical step on our way to a sustainable fashion future - the concept is now established in the sustainable fashion market and has a continuous growth potential. The merging of the trade show duo in 2019, with the current name Neonyt, allowed us, our exhibitors and visitors a new content orientation and a holistic approach to the topic of sustainability as well as a more direct access to the conventional fashion market, especially with regard to retail. In summer 2021, Neonyt will take place for the first time in the new fashion hotspot Frankfurt as part of the new Frankfurt Fashion Week.

 
In 2019, both event formats were merged, the new trade show Neonyt was born and 1 + 1 became what? What components does Neonyt offer in addition to the previous trade show concepts, what is so "new-new" and how did you actually come up with the name?

Thimo Schwenzfeier: One plus one, as you so nicely put it, did not simply add up to two with Neonyt. One plus one equals unique, neo-new, internationally relevant: Among other things, the trade show business was supplemented by the international conference format Fashionsustain and a showcase to gradually bring
together the topic of sustainability with the topics of technology, innovation and prepress. Our content creator format Prepeek ensures the necessary lifestyle and the fashion show provides the glamour of the fashion world. Neonyt combines the most important elements of the international textile and fashion industry - style, business, inspiration, innovation, knowledge, fun and community. And that is exactly what makes Neonyt so "new-new". Progressive and polarizing - the artificial word Neonyt is derived from the ancient Greek word "neo" (eng. new, revolutionary) and the Scandinavian word "nytt" (eng. new). "The renewed new" - Neonyt is our synonym for the fundamental transformation process of the textile and fashion industry, a reinterpretation of what has already been there and our commitment not to stand still and to promote positive change together.

 
For the Neonyt trade show format, you have teamed up with partners - for example, for conferencing components and in the design area. What expertise do they provide, and what is the added value for exhibitors and visitors?

Thimo Schwenzfeier: We know which future topics our brands and the community are currently dealing with and therefore create the right platform - for personal encounters and exchange, for networking and successful business deals. To put it simply: we organize trade shows, we organize events, we provide the right setting, we connect people and business. Neonyt therefore forms the global interface between the various players in the textile and fashion industry - between industry, trade, politics, services and consumption. And so that a lively, transparent and, above all, authentic dialog can develop between all counterparts, we naturally draw on the knowledge of industry experts and form strong partnerships to push fashion and sustainability forward. Only together can we achieve real change and guarantee that our community is provided with sufficient and, above all, the right information to make self-determined decisions.
 

In recent years, the keyword circularity - or rather closing the loop - has been encountered everywhere in the fashion industry. Whether Stella McCartney, the Ellen MacArthur Foundation, or large retail groups - many players and decision-makers are of the opinion that the future of the fashion world lies only in a circular economy and not in downcycling of any kind. What is Neonyt's view on this?
         
Thimo Schwenzfeier: That's right, the concept of circular economy is not new, nor is it limited to the textile and fashion industry. Circularity - actually the ultimate for every product, every industry, for our global society. The concept is supposedly simple: All materials and products are kept in a closed loop, the useful life is increased and at the end of the product life cycle everything is recycled. Many sustainable fashion labels are already showing how it's done. Neonyt brands are right at the forefront and are already implementing practices that should become the norm as soon as possible: starting with T-shirts or shoes made from recycled materials and take-back systems for collection items. As well as compostable clothing that "dissolves" at the end of the product life cycle and breaks down into its natural components, and on to repair services and leasing models for denim and co. - thinking holistically, acting in a sustainable manner and producing in a circular way are definitely the trends of the coming fashion seasons and at least one important, if not the most important, component of the future fashion world.

 
For the idea of a circular economy to be implemented successfully, there needs to be an interplay between technology, production, design and sales. What presentation options and forms of communication does Neonyt have in store for the various components?  

Thimo Schwenzfeier: The combined innovative power of technology, sustainability and digitization is an important driver of the current developments in the textile and fashion industry - including the topic of circularity. Processes and production sequences are changing along the entire value chain - the industry has to reinvent itself for the most part. Neonyt shows how this can work successfully in the long term, with the internationally established Fashionsustain conference format - including spin-offs in China, Europe and the USA - and the supplementary Showcase. Together, these two formats offer the ideal mix of orientation and inspiration to prepare the industry for the future. Virtual fashion, authentic brands and textile value chains, science and innovation as well as retail, business models and impact investment - at Fashionsustain, top-class experts will exchange ideas with an interested professional audience and discuss the change and new solutions in the textile and fashion industry. The Neonyt Showcase takes a deeper look at the topics and innovations presented and discussed on the Fashionsustain stage. Expert knowledge on-demand, so to speak: whether microfactories or installations - Neonyt brands as well as brands from the rest of the Texpertise Network of Messe Frankfurt, such as exhibitors at Texprocess, get the chance to present sustainable innovations, new technologies and materials, initiatives, change-maker campaigns or research projects. Here they interact directly and practically with Neonyt's international cross-sector community.
 

Last year was an unprecedented challenge for trade show companies due to the pandemic situation. Neonyt was also affected by this - and physical events had to be canceled. With a digital format "Neonyt on Air" you have tried to offer exhibitors and visitors an alternative platform. What has been your experience: Did the focus of the trade show and its community perhaps even help to make such a virtual event easier to launch? 

Olaf Schmidt: Corona has already changed a lot and will certainly continue to do so in one way or another. Nevertheless, it will continue to be our task as trade show organizers to offer the industry the best possible meeting platforms for presenting their new products worldwide. We are convinced that people will continue to want to meet in person and discuss new products as well as services in the future. This is particularly the case in the textile sector, where haptics plays a very crucial role. We expect that there will even be a certain catch-up effect after the crisis. Because what the last two very successful digital seasons of Neonyt on Air, for example, have nevertheless shown clearly: Fashion lives from personalities, presentation and inspiration. Digital formats can support this, but they cannot fully replace it.
 
Thimo Schwenzfeier: The digital Neonyt on Air was far from being a total replacement for the original physical seasons, but nevertheless a huge success. For one week, fashion, lifestyle and digital experts were discussing about more authenticity, immediacy and transparency in the textile and fashion industry in numerous keynotes, interviews and panel discussions. With more than 24,000 international followers on Instagram, we generated around 50,000 impressions and more than 4,700 content interactions with our presenting partners Grüner Knopf, Hessnatur and Oeko-Tex in just five days. These figures show, that the topic of sustainability has arrived in the middle of society and is being discussed across all industries. I think that the polarization and, above all, the prevailing restrictions, as far as trade and commerce are concerned, have certainly contributed to holding a successful digital format. Digitization was truly the booster for the fashion industry in this case: Instead of replacing personal exchange, it helps to maintain and expand the business activities of brands, especially in the current times. And quite clearly, the need for exchange in the fashion industry and the motivation to initiate together a change are still enormous. Neonyt on Air has once again shown us that clearly. However, we are already looking forward to the next physical edition of Neonyt.
 

The COVID-19 pandemic has also left its mark on the textile and clothing industry. When you look back on just under a year of "state of emergency" - what positive experiences do you take with you, where do you see a need for improvement, for what support are you grateful for and where did you feel you were left on your own? 

Olaf Schmidt: A year like no other - that can clearly be said about the last one. The Corona pandemic caught everyone off guard - us as trade show organizers, but of course also our exhibitors, visitors and partners. Especially in the near future, we must continue to expect, that trade shows can only be held under stricter health and safety regulations at first. Messe Frankfurt reacted quickly and developed a comprehensive safety and hygiene concept. One thing was clear: we all had to adjust and deal with a new situation. And so far, we've done a great job together, the team understanding among each other, the close contact - although physically at a distance, but globally networked - between all those involved, makes me feel positive about the future. For me, an important realization of this global pandemic, a credo almost, is to be open to new ways and opportunities and to find ways to combine things rather than separate them: Hybrid solutions, so to speak.    

Thimo Schwenzfeier: There was no master plan for Neonyt, and in places there was also the impression that we now had to "reinvent the wheel": How does collaboration work when face-to-face meetings cannot take place? Can digitized contact compensate for the social distancing that is currently being imposed and still make it possible to work closely together? How can business relationships be maintained when stores are closed? How can priorities be set when well-tested solutions and established annual plans lose their validity? Who am I, who are 'the others' and what defines community? Never have questions about our creation and existence, about what makes us who we are and what we want to be, been more relevant than right now. One thing that I take away from the current situation and that allows me to continue to look forward positively despite difficult circumstances is the fact, that cohesion and solidarity with one another - both privately and professionally - have become increasingly important. Like a magnifying glass, the crisis has magnified existing opportunities, but also challenges, and brought the essentials into focus. I think that if we continue to try to experience things more consciously and not take them for granted, we will manage together to create a " new normal " and leave this crisis with more strength.
 

As in the past in Berlin, Neonyt is currently also located in Frankfurt in the environment of the Fashion Week and conventional trade shows. Can you imagine that a special event concept like Neonyt will be unnecessary in a few years, because the circularity concept will have established itself in the clothing industry worldwide?

Olaf Schmidt: A clear no. Sustainability per se is already no longer a unique selling point. The important thing is to keep up with the times, to follow trends or, even better, to track down new trends yourself and develop them further. Things, strategies, concepts will always change - if last year showed us one thing, it was certainly that. It is more than desirable that we all learn from this crisis and reflect on the really important values, on solidarity between partners, on climate protection and sustainability. It may be exactly for this reason, that companies that place particular emphasis on sustainability will emerge even stronger from this crisis. So you can be sure that we, as a leading international trade show organizer for the textile industry, will continue to focus on sustainability and support future-oriented companies and solutions. However, this will not make our formats obsolete due to the establishment and normalization of holistic business practices in the textile industry. But it is impossible to make an exact forecast for the coming decades. Over the last few months, we have all noticed ourselves in our personal everyday lives or in our professional lives, how uncertain and volatile the future is. What is clear, however, is that the fashion industry - the world in general - will change even faster than before. And therein lies the opportunity for formats like Neonyt. The ten-year history shows in how many directions Neonyt has already developed, content focal points have been shifted and it has reinvented itself - this will also be the case in the future.
 

Mr. Schwenzfeier, in addition to your role as Director of Marketing Communications for Messe Frankfurt's textile exhibitions, you have also been Show Director of Neonyt since 2018. You have spoken to many exhibitors and visitors - which ideas or creations have particularly impressed you?

Thimo Schwenzfeier: I think it's not so much the individual innovations or creations of the exhibitors at our trade shows. And I deliberately choose the plural here. Because in my function as Director of Marketing Communications in the Textiles & Textile Technologies division of Messe Frankfurt, Neonyt is just one of "my" events. I think it's more the variety of fashion, technical and professional innovations that brands, labels, companies, start-ups and designers present every year. But if I really had to choose one innovation, it would probably be the vegan "Currywurst" sneakers made of red pepper and recycled PET bottles - the same label also offers shoes made of wood, stone, coffee and mushrooms or now even meteorite particles. It is impressive to experience every season anew of how creative the textile and fashion industry is.
 

Breaking new ground means being willing to make decisions, overcoming fears - and thus also having the courage to fail. Not every project can succeed. In retrospect, about which entrepreneurial decision by Messe Frankfurt are you particularly glad, that you made?
 
Olaf Schmidt: Clearly the decision to create Neonyt. To establish our own trade show format for fashion, sustainability and innovation and to integrate the freedom and lifestyle, which entail this topic, into our event. After more than a decade, we may be saying goodbye to Berlin in 2021, but not to our community and our spirit. Together we look back on many fashionable seasons and great locations in the capital: starting in the Hotel Adlon Kempinski to the Ewerk, the Postbahnhof, the Kronprinzenpalais, the Funkhaus and the Kraftwerk to the last physical event in Tempelhof. With the turn of the year and in the setting of Frankfurt Fashion Week, Neonyt is about to move to the metropolis by the Main. In Frankfurt, worlds collide: Skyscrapers and 19th-century villas. Architectural sins and masterpieces. Business and middle class. Red-light district and luxury boulevard. Frankfurt Fashion Week sets new impulses in this area of conflict. And in the middle of all this is Neonyt. The signs are pointing to a new beginning - a restart for the entire fashion industry, together we are taking sustainability to the next level - the focus topics Applied Sustainability and Applied Digitization are creating a completely new Fashion Week ecosystem in the metropolis by the Main.
 

If everything works out, Neonyt can be held again as a face-to-face event for the first time in July 2021. What are your plans? What and who can visitors look forward to? And what backup is there for a worst-case scenario?

Thimo Schwenzfeier: Of course, due to the currently ongoing tense situation around Covid-19, it is difficult to make binding statements about the next physical event. However, we are cur rently expecting the situation to ease into the summer summer 2021 is therefore on the health of everyone - exhibitors, visitors, partners and employees of Neonyt. Messe Frankfurt has developed a concept that includes detailed hygienic measures: Hygiene, distance and fresh air supply are important factors, which we coordinate with the responsible authorities in Frankfurt and those in charge of Frankfurt Fashion Week. In due course, the Neonyt community will receive advice and recommendations for the trade show attendance and participation, that comply with current regulations. We have not yet thought about a concrete backup for a worst-case scenario, as we are currently anticipating a physical B2B event - but the last two seasons have shown, should it not be possible to hold the Neonyt face-to-face, that we are quite well positioned with the digital Neonyt on Air and could certainly adapt the format for another summer event. We regularly exchange ideas with all market participants and try to get a sense of opinions and wishes from our community through surveys. Wait and see, one might say - in the end, we also have to act according to what the current health situation allows and what decisions are made by politicians.

The Interview was conducted by Ines Chucholowius,
Managing Partner, Textination GmbH

When it comes to the future of motorized mobility, everyone talks about the power drive: How much e-car, how much combustion engine can the environment tolerate and how much do people need? At the same time, new powertrains place ineased demands not only on the engine, but also on its housing and the car body: Carbon fibers are often used for such demanding applications. Like the powertrain of the future, the materials on the vehicle should also be environmentally friendly. That is why recycling of carbon fibers is required. Institutes of the Zuse Community have developed solutions for this.

Carbon fibers consist almost completely of pure carbon. It is extracted from the plastic polyacrylonitrile at 1,300 degrees Celsius, using a lot of energy. The advantages of carbon fibers: They have almost no dead weight, are enormously break-resistant and sturdy. These properties are needed, for example, in the battery box of electric vehicles in structural components of a car body.

The Saxon Textile Research Institute (STFI), for instance, is currently working with industrial partners on combining the static-mechanical strengths of carbon fibers with vibration damping properties to improve the housings of electric motors in cars. The project, which is funded by the German Federal Ministry for Economic Affairs and Energy, is aimed at developing hybrid nonwovens that contain other fibers, in addition to carbon fiber, as a reinforcement. "We want to combine the advantages of different fiber materials and thereby develop a product that is optimally tailored to the requirements", explains Marcel Hofmann, head of department of Textile Lightweight Construction at STFI.

The Chemnitz researchers would therefore complement previous nonwoven solutions. They look back on 15 years of working with recycled carbon fibers. The global annual demand for the high-value fibers has almost quadrupled in the past decade, according to the AVK Industry Association to around 142,000 t most recently. "Increasing demand has brought recycling more and more into focus", says Hofmann. According to him, carbon fiber waste is available for about one-tenth to one-fifth of the price of primary fibers, but they still need to be processed. The key issue for the research success of recycled fibers is competitive applications. STFI has found these not only in cars, but also in the sports and leisure sector as well as in medical technology, for example in components for computer tomography. "While metals or glass fibers cast shadows as potential competing products, carbon does not interfere with the image display and can fully exploit its advantages", explains Hofmann.
 
Using Paper Know-How
If recycled carbon fibers can pass through the product cycle again, this significantly improves their carbon footprint. At the same time it applies: The shorter the carbon fibers, the less attractive they are for further recycling. With this in mind, the Cetex Research Institute and the Papiertechnische Stiftung (PTS), both members of the Zuse Community, developed a new process as part of a research project that gives recycled carbon fibers, which previously seemed unsuitable, a second product life. "While classic textile processes use dry processing for the already very brittle recycled carbon fibers in fiber lengths of at least 80 mm, we dealt with a process from the paper industry that processes the materials wet. At the end of the process, in very simplified terms, we obtained a laminar mat made of recycled carbon fibers and chemical fibers", says Cetex project engineer Johannes Tietze, explaining the process by which even 40 mm short carbon fibers can be recycled into appealing intermediates.

The resulting product created in a hot pressing process serves as the base material for heavy-duty structural components. In addition, the mechanical properties of the semi-finished products were improved by combining them with continuous fiber-reinforced tapes. The researchers expect the recycled product to compete with glass-fiber-reinforced plastics, for example in applications in rail and vehicle construction. The results are now being incorporated into further research and development in
the cooperation network of Ressourcetex, a funded association with 18 partners from industry and science.

Successful Implementation in the Automotive Industry
Industrial solutions for the recycling of carbon fiber production waste are being developed at the Thuringian Institute of Textile and Plastics Research (TITK). Several of these developments were industrially implemented with partners at the company SGL Composites in Wackersdorf, Germany. The processing of the so-called dry waste, mainly from production, is carried out in a separate procedure. "Here, we add the opened fibers to various processes for nonwoven production", says the responsible head of the department at TITK, Dr. Renate Lützkendorf . In addition to developments for applications e.g. in the BMW i3 in the roof or rear seat shell, special nonwovens and processes for the production of Sheet Molding Compounds (SMC) were established at TITK. These are thermoset materials consisting of reaction resins and reinforcing fibers, which are used to press fiber-plastic composites. This was used, for example, in a component for the C-pillar of the BMW 7 Series. "In its projects, TITK is primarily focusing on the development of more efficient processes and combined procedures to give carbon fiber recycling materials better opportunities in lightweight construction applications, also in terms of costs", says Lützkendorf. The focus is currently on the use of CF recycled fibers in thermoplastic processes for sheet and profile extrusion. "The goal is to combine short- and continuous-fiber reinforcement in a single, high-performance process step."

1) Since February 1st, 2021, Dr.-Ing. Thomas Reussmann succeeds Dr.-Ing. Renate Lützkendorf, who retired 31 January.

• Hybrid concept to combine the best of both worlds
• Systematic enhancement of ISPO’s digital strategy
• End consumers to be digitally integrated into the event for the first time

The world-leading trade fair ISPO Munich will take place from January 31 to February 3, 2021, for the first time as a hybrid event that will be held both in-person in Munich and online around the world. The new concept marks the event’s systematic transformation into a platform and applies the broad range of digital expertise that ISPO has gained over the past 10 years. With the threat of travel restrictions looming over the trade fair, the digital elements will create the ideal basis for integrating global target groups: While representatives from European markets are generally expected to attend the in-person event, the digital enhancements will enable an intercontinental audience to participate as well. Another new addition next year will be the digital integration of end consumers.

“Sports and outdoor activities – two areas that are closely related to the topic of health at the moment – have never been so socially relevant,” said Klaus Dittrich, the Chairman and CEO of Messe München. “This has created a growing desire in the industry for personal interaction. The urge to present and discuss new potential, partnerships and business models is greater than ever. The industry has been communicating this need to us, and we have come up with the concept to meet it.”

Personal interaction meets global participation
New participation options, new topics, expanded target groups: All of these things are reflected in particular in the large number of physical and digital attendance options devoted to the focus topics of creativity & digitalization, health and sustainability. In addition to product presentations in the trade fair halls, the event will focus on networking, matchmaking, knowledge transfer and innovations.

Thanks to the integrated hybrid stages, people will be able to attend presentations, talks and workshops not only on site, but also from locations around the world. Brands, key players and top athletes will speak with an audience that extends well beyond the walls of the trade fair halls. ISPO Munich will also include two single-day conference formats: ISPO Digitize Summit (February 1, 2021) and the Sports Tech Conference Europe (February 2, 2021).

In implementing the hybrid concept, the ISPO team has drawn on the digital expertise and reach that it has acquired over the past 10 years: They are based on the development of an eco-system with services that extend along the value chain and on the implementation of an entirely digital ISPO Re.Start Days in the summer of 2020.

New: digital integration of end consumers  
For the first time, end consumers will have an opportunity to experience something that was formerly reserved for the B2B audience: the chance to participate digitally and conduct a direct dialogue with the industry. With the help of presentations, workshops and master classes, the brands and companies will have an opportunity to make digital presentations to sports and outdoor fans around the world and speak directly to them. The ISPO Open Innovation Community has already demonstrated the effectiveness of this concept: Approximately 80,000 end consumers contribute their know-how to crowd-sourcing and market research campaigns and provide companies with valuable insights about new products and ideas throughout the year.

Personal interaction on the exhibition grounds in Munich will remain the provision of the B2B audience.  

Markus Hefter: “We are ready for ISPO Munich 2021 and are really looking forward to lots of new ideas. One thing is clear: Even though many issues can be solved digitally, the desire to meet and interact in person has grown dramatically during the coronavirus pandemic. We are really happy about the strong support we have received from the industry and will provide our customers with a safe platform.”

Maximum safety and flexibility  
A comprehensive safety and hygiene concept that Messe München worked out with the state government of Bavaria will be used during the on-site activities of ISPO Munich 2021. The safety of exhibitors and visitors will have the highest priority. Events began to be successfully held once again on the Munich exhibition grounds on September 1. The rule of thumb for international visitors is: Trade fair participants may travel from all countries to Germany provided that certain conditions are met because they are considered to be business travelers on an important mission.

Exhibitors will have more flexibility as a result of the extension of deadlines and flexible cancellation terms. If needed, pre-built booths may be used in order to cost-effectively and efficiently participate in the trade fair.

If exhibitors or visitors have any questions about the safety and hygiene concept, they may contact the Messe München hotline by phone +49 89 949 11400 or e-mail at corona.support@messe-muenchen.de. The service hours are: Monday through Thursday from 9 a.m. to 5 p.m. and Friday from 9 a.m. to 4 p.m.

“We make it happen” is the idea that is currently guiding the whole imm cologne team. As a message to imm cologne exhibitors and visitors, it underscores Koelnmesse’s firm commitment to the industry event and signals that imm cologne will be ready to welcome visitors on 18 January 2021. To increase the event’s reach further, the trade fair organisers in Cologne are working to extend it into the digital sphere with the new imm cologne @home platform.

“We at Koelnmesse believe firmly that everything is possible with our hygiene and safety concept #B-SAFE4business and a positive attitude,” explains Matthias Pollmann, Vice President Trade Fair Management at Koelnmesse. “This progressive attitude is one that many national and international exhibitors and visitors share with us. They are looking forward to networking at the emotional high point of the year for the industry – even if it is clear to everyone that many things will be different next year,” he adds.

Digital formats will ensure maximum reach
The second key challenge facing the team led by Matthias Pollmann and Claire Steinbrück is reaching those visitors who are unable to or do not want to travel to Cologne due to the pandemic. “By extending the trade fair into the digital sphere, we have the best opportunities to increase our reach. Digital reach will be used as a new success criterion for all our trade fairs going forward. It will no longer simply be about the numbers of exhibitors and visitors and where our visitors come from – we want to be measured in terms of our digital reach as well,” says Matthias Pollmann, as he explains the future strategy for imm cologne. “Our goal is to show how many contacts our exhibitors can generate globally in addition to the purely physical visitors,” adds Claire Steinbrück. “gamescom was something like our future lab for reaching consumers, and DMEXCO, which will be hosted this month, will be our blueprint for trade events. Based on our experiences with these two trade fairs, we will draw up a tailored digital strategy for imm cologne by the end of October,” says the trade fair management team, sketching out imm cologne’s evolution into a hybrid format.

Ready for launch: imm cologne @home is in beta
With the launch of the new imm cologne @home platform, the Interior Business Event is doing more than simply expanding business opportunities for its exhibitors. It will also reach a broad spectrum of visitors, creating a diverse range of further possibilities for interaction. The platform will be a forum for virtual exchanges between industry peers, for networking with relevant contacts and elevating business to the next level. In addition to a variety of live-streamed digital stages – including the highly respected talks forum The Stage – there will be open and thematically curated video chats in the virtual cafe, and online trade fair visitors will be able to experience exclusive new launches by imm cologne exhibitors in private showrooms.

Exhibitors to benefit directly from additional contacts and broader reach
Unlike standard webinar and video conferencing systems, imm cologne @home will offer exhibitors more than just the option to stream content – they will also be able to start one-to-one conversations with customers directly. imm cologne @home will thereby offer real networking opportunities, direct dialogues and real-time solutions – a decisive advantage for any exhibitor.

LivingKitchen visitors and exhibitors will also benefit from the new hybrid format. In addition to presenting events and talks programmes digitally, all the functionalities of the new platform will be made available for LivingKitchen as well. Visitors to the Interior Business Event will be able to access imm cologne @home as a website and an app. The platform is designed to serve as an information and communication hub between the industry events and as a digital trade fair for visitors and exhibitors.

Digital content by imm cologne and its exhibitors is crucial to the hybrid trade fair’s success
“By the end of October, we will decide which tools we will take from the large toolbox for DMEXCO and use for imm cologne. What our exhibitors think will play an important role in this. Everything that supports their business is crucial,” says Pollmann. He adds an appeal to the industry: “The path into a hybrid future is one that we cannot and do not want to take alone. In order to reach virtual visitors, it is vitally important that our exhibitors also produce digital content to accompany the content that we can generate as imm cologne. The same rule applies here as it does with a physical trade fair: We provide the platform and activate the visitors. But the products, the innovations, the stories – this is content that has to come from the exhibitors themselves.”

“You make it possible – we make it happen.”
It is crucial for imm cologne that both exhibitors and visitors realise that the trade fair can be a success for their companies, for the entire industry and for Germany and Europe as a hub for commerce and industry only if they themselves adopt the guiding idea behind imm cologne. “You make it possible – we make it happen,” is how Matthias Pollmann puts it in his invitation to the industry to join imm cologne on this journey.

NEW HIGH-TECH FIBERS AND YARNS FOR THE SPORTS AND LEISURE MARKET 

With its trade fair premiere at this year's ISPO Munich at the end of January, a newcomer in the sportswear and outdoor market has achieved a well-received appearance: For the first time in Europe, the Japanese company I.S.T Corporation presented its new high-tech fiber and a spinning technology with amazing possibilities at their booth with extensive augmented reality technology. In the sports industry, I.S.T is only known to a few, although there have been first cooperations with well-known manufacturers such as Patagonia in the last seasons.

The CEO and president, Ms. Toshiko “Toko” Sakane, answered Textination's questions. She has been running the company - founded by her father - since November 2016. After completing her bachelor's degree in sociology / human sciences, she worked in the office of the House of Representatives of the Japanese Parliament and the former Japanese Minister of Health and Social Affairs. Later she was managing director of the I.S.T Corporation in Parlin, New Jersey, USA, founded in 2000 - a manufacturer of unique, high-temperature resistant resin materials.

I.S.T is a Japanese company with a comparatively young history. Originally founded in 1983 as an R&D company, you are now also based in the United States and in China. If you had to introduce yourself in 100 words to someone who doesn't know the company: What makes you unique?
I.S.T Corporation is an R&D-oriented Japanese material company with the claim to "invent technologies that no one can imitate". What makes us uniquely competent is our integrated process of material development, innovating our own in-house production methodologies and advancing production technologies. Through this end-to-end cycle, we can achieve various advantages including developing complete original products, securing best quality assurance, and, most importantly, letting us discover new innovations. I.S.T is committed to keep innovating new technologies so they can contribute to enriching people’s lives more.   

Your slogan is: make the impossible possible. In which markets and from which industries do you feel particularly challenged? And with which product innovations for the textile industry do you think you can move the most?
I.S.T’s focus is sporting goods and apparel industry because materials used in this industry demand a wide variety of functionalities and are likely used in extreme conditions. We find it challenging and exciting to offer our advanced innovations. As for the textile industry, we believe our KARL KARL™ spinning technology offers a new great solution for winter active inner wears because it offers all the functions they want, such as warmness, being light-weighted, and easy-care.

A central guideline of the company is the motto "Inventing technologies no-one can copy". Patent protection and a consistent brand policy characterize your activities in the market. But patents can expire and brands can be copied, what makes you uncopiable?
A patent or brand can be copied. However, what makes it impossible to copy us is that our core technologies are embedded throughout our integrated process of material development, in-house production methodologies and advancing production technologies. For example, our KARL KARL™ technology is spinning technology that offers multiple functionalities in one yarn and also can be applied to all different types of and hybrid yarns.
There are some other companies that claim their yarns having a similar function with ours, but those are single function and in a particular type of yarn. This is the most fundamental and significant difference between technologies and competitors. Other companies may be able to copy a single function from us, but it will never be the same as our products that are the results of layers and layers of our integrated innovations.
          
Initially focused on selling technology, you are now a major fiber producer yourself. In addition, you have expanded your portfolio in the past 15 years - for example in the wool market - through acquisitions in Japan and China. Where do you see I.S.T as a player in the textile sector in 2030?
Just as you see a GORE-TEX tag on any outerwear, I would like to see brand names produced by I.S.T on every sports and fashion apparel and people instantly recognize it as the sign of most advanced functional materials.

For the first time you attended ISPO Munich 2020 in January as an exhibitor to present the high-tech fiber IMIDETEX® and new KARL KARL™ yarns to the sporting goods and outdoor industry. What is so special about these two products and what makes them so suitable for use in these markets?  
IMIDETEX®, made of 100% polyimide resin and commonly used in outer space, has possess various advantageous characteristics that other existing super fibers couldn’t overcome, including it being high UV resistant, heat resistant, low water absorption, and has a high tensile strength.
Examples of possible applications for the outdoor market as in composites, would include highly resistive but also durable golf shafts or tennis rackets that can minimize the impact sent to players, and a bicycle that can absorb the shock from the ground throughout a long and competitive race. As for textile, it makes an incredibly durable sail that endures an unforgiving sun. Finally, as yarns IMIDETEX® makes a light-weighted but super strong ropes that people can trust their lives with. IMIDETEX® can provide great performances in extreme natural conditions.
KARL KARL™ is the patented spinning technology that multiplies one core thread with another thread. By expanding the yarn structure itself, it achieves lightness and warmness, which are two seemingly opposite characters to coexist. This technology can be applied to wool, cotton, silk, polyester, nylon … plus there are endless possibilities of developing new yarns by combining different characteristic yarns.
These materials by I.S.T are unrivaled and present infinite possibilities for richer designs in sports fashion scenes.

In a world in which great value is placed on nature and natural materials, man-made fibers are not always welcome. On your website you postulate, I.S.T contributes to the people around the world through chemistry for a better life style. Which aspects make a good case for that?
Our brand-new product, faux-fur, made with KARL KARL™ technology is a good example of our contribution to keep the good balance of natural and synthetic.
The real fur is fashionable but it’s a symbol of animal abuse nowadays. To conserve the nature, our KARL KARL™ faux-fur offers an alternative to fashion, while preventing polluting the ocean from using micro fibers.    

In which socially relevant subject areas do you see a particularly great need for innovation and action during the next 5 years? What is your assessment that your company will be able to offer solutions for this with its products?
We believe that light-weight is a major key factor for better lives and the planet because it allows to save energies and expand the performances.
As the first step, we are bringing in our light-weight technologies, such as IMIDETEX® composites and KARL KARL™ technology, to sporting gears and apparels to support our active lifestyle before extending those technologies to all other markets that can benefit from them.

There are various definitions for sustainability. Customers expect everything under this term - from climate protection to ecology, from local on-site production to the exclusion of child labor etc. What do you do to bring this term to life for your company and what activities or certifications do you rely on?
I.S.T's taking this subject seriously in any aspects. We aggressively approach to research and develop technologies and materials that can support human lives and planet, as well as bringing in sustainable methods and materials to our operations. For instance, we are developing a yarn making from cellulose taken out of used papers without using any harmful chemicals to humans. Also, we invested in a state-of-the-art low emission production facility to make Polyimide materials.
We are RWS (Responsible Wool Standard) certified yarn spinner as far as wool is concerned and we are using RWS certified wool fiber. As for polyester, we are using GRS (Global Recycled Standard) certified recycled polyester and as for cotton, we are using organic cotton fiber. Moreover, our company values producing materials that last forever and not to produce any wastes and/or one-time use materials.
          
Where do you get your inspiration from to research certain technologies or products? Which orders or inquiries from the textile supply chain play a decisive role?
You may think that our life is already filled with things and there isn’t a thing that we cannot get in this world. And yes, we have everything. Yet there are some functions you wish you had in addition to full of those things.
The original idea of developing KARL KARL™ technology was that we wanted to adapt functions like lightness, warmness, quick-drying and easy-care that synthetic fibers have, into natural fibers such as wool and cotton because, obviously natural fibers are much friendlier to human and the earth than petroleum-based fibers.
We believe in and keep our corporate missions: “Develop and manufacture products no others have tried before” and “Handle high-value added products”. Our inspirations for R&D come from our belief, “bringing a wish into a reality”. We do not get an inspiration from others. Our innovations inspire customers and the market.

Breaking new ground means willingness to make decisions, overcoming fears - and thus courage to fail. Not every project can succeed. In retrospect, which entrepreneurial decision are you particularly happy to have made?
Actually, for us, there is no such thing as failed projects because we never give up until each and every project becomes successful.
By carrying on our original corporate missions of “Develop and manufacture products no others have tried before” and “Confront difficulties” that my father, the founder of I.S.T, established almost forty years ago, I.S.T members including myself have learned the joy of overcoming problems and of feeling the victory.
When I took over the business, I have set my goal to “move forward to the global market to inspire the world with our technologies”.
Most recently, by making the decision to enter the sporting gears and apparel market and receiving very positive responses at the ISPO Munich 2020, I’m very pleased that we have made one step forward toward my goal.

The interview was conducted by Ines Chucholowius, CEO Textination GmbH

• At COMPOSITES EUROPE from 10 to 12 September
   
• Incubator of ideas for multi-material lightweight construction
   
• „Ultralight in Space“: Market study examines lightweight construction trends in aerospace

Whenever there’s movement, mass and weight quickly become destroyers of energy. From 10 to 12 September, the Lightweight Technologies Forum (LTF) at COMPOSITES EUROPE in Stuttgart will show how lightweight construction contributes to more efficient and better cars, airplanes and machines. The focus at the Forum will be on the commercially viable implementation of cross-material and holistic lightweight construction systems. The way to get there is through the digitalisation of the process chain.

From the idea to the component – that’s the path the Lightweight Technologies Forum aims to illuminate and support. To that end, the forum will gather current lightweight construction projects in Stuttgart, including from automotive engineering, aerospace and mechanical engineering – precisely those industries whose stringent material, safety and reliability demands make them idea generators for many other industries.
The commonality that runs through all the projects: a consistently digital process chain contributes significantly to the implementation of innovations. Another focus area is connecting and joining technology in multi-material lightweight construction.

"The Lightweight Technologies Forum is conceived as a cross-industry and cross-material incubator of ideas, a place where all stakeholders can consider new concepts. For that, we’re bringing successful flagship projects to Stuttgart”, says Olaf Freier, who on behalf of organiser Reed Exhibitions is responsible for the programme of the forum.

The growing significance of digitalisation and bionics
Support in putting together the forum programme comes from Automotive Management Consulting (AMC). The consulting company specialises in lightweight construction strategies, processes and structures in the automotive industry. “Lightweight construction requires comprehensive, systematic thinking”, says Rainer Kurek, the managing director of AMC. “The most important key factor, though, is the digitalisation of the process chain. Only virtual and simulation-driven design work can bring about competitive lightweight construction products, because they’re launched faster and ensure process safety while costing far less in development”, Kurek adds.

„Ultralight in Space“: Market study on lightweight construction trends in the aerospace industry
When it comes to ultra-lightweight construction, space travel has played a pioneering role since its inception, having driven many disciplines to new record performances. In cooperation with the Luxembourg-based aerospace suppliers GRADEL, AMC are currently conducting a market study to examine the latest technological trends. The results will be revealed at the LTF in Stuttgart on 10 September.
"Even though aerospace is a niche business: technical solutions that meet the stringent material demands here lead the way into the future, which in turn impacts other industries. That’s why it’s important to know the customer’s needs as well as the lightweight strategies, processes, structures and material decision-making of this market”, Rainer Kurek says assuredly.

Also underlining how important space travel is for the development of new technologies is Claude Maack, managing director of GRADEL: “All components are exposed to extreme conditions. Right from the launch of the rocket, they have to withstand enormous acceleration forces. In space, material must resist radiation exposure – and for many years. Then there are the high temperature differences from minus 185 to plus 200 degrees Celsius – alternating every couple of hours from one extreme to the other.“

The material question: Composites with biggest growth potential
Metals currently hold the largest market share among lightweight materials – but fibre-reinforced composites are said to have the biggest growth potential. More and more often they get to apply their strengths in lightweight construction. In the exhibition area, the LTF demonstrates how glass-fibre reinforced (GFRP) and carbon-fibre reinforced plastics (CFRP) play to their strengths in hybrid structural components.
On display, among other things, will be an ultra-lightweight seat by Automotive Management Consulting (AMC), Alba tooling & engineering and csi entwicklungstechnik GmbH, which was presented as a feasibility study – based on the lightweight construction innovation xFK in 3D – and virtual prototype at the 2018 LTF.

The innovative ultra-lightweight seat, which only weighs 10 kg, is based on a special winding process for fibre-composite components. The  “xFK in 3D process” uses a resin-impregnated continuous fibre from which components are wound and produced without waste to match the load. Conceivable uses for the concept seat include the so-called hypercars, sports cars and the air taxis of the future. Just a few weeks ago, the prototype was presented to the public and swiftly recognised with the German Innovation Award.

Exhibitors will be presenting additional lightweight construction solutions in the adjacent Lightweight Area. Some examples include structural components, semi-finished goods, technical textiles, adhesives and resins for automotive engineering and aerospace.

Altogether, visitors of the Lightweight Technologies Forum and COMPOSITES EUROPE will meet 300 exhibitors from 30 countries who will come to Stuttgart to showcase the entire process chain of fibre-reinforced plastics – from materials to machines for processing to concrete application examples from automotive engineering, aerospace, mechanical engineering, construction, wind power, and the sports and leisure sector. Besides new products, a special focus of the trade fair will be on advances in process technologies for large-scale series production.  
 

• Strong Triple: COMPOSITES EUROPE, International Composites Conference and Lightweight Technologies Forum
• “Process live” special areas showcase technological progress
• Co-located event: Foam Expo Europe

The composites industry provides important impetus – for lightweight construction and material innovations in automotive, aviation, mechanical engineering, construction, wind power as well as in the sports and leisure sectors. So in international competition it is solutions with a high degree of automation that are in demand. COMPOSITES EUROPE from 10 to 12 September will present the trends and advances in the production and processing of fibre-reinforced plastics in Stuttgart. The trade fair will be accompanied by the International Composites Conference and the Lightweight Technologies Forum. Also held in parallel at the Messe Stuttgart premises will be Foam Expo Europe.

Trade fair visitors will meet with over 300 exhibitors from 30 nations who will be displaying materials, technical solutions and innovative application examples in Stuttgart. Apart from novel products the trade fair will place special emphasis on innovative process engineering. Visitors will learn about the state of play in serial production and new applications in the composites industry in the exhibition area as well as on numerous special areas, on themed guided tours, at the accompanying International Composites Conference and at the Lightweight Technologies Forum, which is dedicated to the trends in multi-material lightweight construction.

“Process live”: Technologies in Synergy
Perfectly coordinated processing and manufacturing processes will be centre stage at the “Process live” event. On shared exhibition space machinery and equipment manufacturers will exhibit their technologies in concert and – what’s more – in operation so as to show the different individual processes in a real context.  

On display, to name but one exhibit, is VAP®, the Vacuum Assisted Process patented by Airbus, which will be in the limelight in the Trans-Textil and Composyst special area. This process permits the one-step production of large-surface and geometrically complex components without an autoclave, which is why it is particularly suitable for structural components in aviation, wind power, shipbuilding, in rail and road transport, in machinery and device manufacturing as well as in architecture and in the leisure industry.

The “Process live” special area care of cutting specialists GUNNAR from Switzerland specifically targets the DACH region (Germany, Austria, Switzerland) with its small and medium-sized companies. Jointly with laser projection expert LAP and composites engineering expert SCHEURER Swiss, GUNNAR introduces a connected overall process that fuses modern machinery and software with specialists’ manual jobs. The point of departure here is an automated manufacturing process for sorted layer placement in small and medium quantities involving a certain degree of skilled labour.

Fibre composite specialist Hacotech will present CNC-controlled cutting processes and various finishing possibilities in cooperation with Aristo Graphic Systeme and Lavesan. Alongside cutting, production preparation and customised sizing, the production of dimensionally correct templates and the cutting and custom-sizing of composite materials and prepregs will be on show.

Cutting technology is also centre stage in the special area of Rebstock Consulting, Broetje-Automation and Zünd Systemtechnik, which will be taking part in “Process live” with “Automated Sorting and Kitting”.

Composite producer Saertex and chemical company Scott Bader will demonstrate the RTM process for producing and curing a laminate that complies with the highest fire protection requirements in as little as 1 hour.   

5th International Composites Conference (ICC)
Serial production, stable processes, new markets – the International Composites Conference (ICC) is set to inject a fresh breeze for innovations into the market and to this end brings together processors and users of fibre-reinforced plastics from all over Europe. For the first time, this renowned Conference will be held in parallel with COMPOSITES EUROPE. The lecture programme put together by the trade association Composites Germany and the trade fair will also move closer in terms of content.  

One of tomorrow’s cross-cutting themes keeping the entire industry on its toes are multi-material solutions in nearly all industrial applications. In the construction sector the Conference also deals with the rising use of carbon concrete. Process engineering will focus on processing thermoplastic materials for serial production and stable processes for thermoset plastic processing.  

The partner country of the Conference is the United Kingdom. Especially against the backdrop of the current Brexit debate the ICC aims to foster exchange among all European countries. After all, the UK is among the biggest producers of composites components in Europe.

Themed Tours on Digitalisation, Fibre Glass, Thermoplastics, Automotive and Wind Power
Guided tours and hands-on demonstrations in the exhibition halls complement the conference programme. Themed guided tours revolving around composites application, materials and markets guide trade fair visitors and congress delegates right to the stands of selected exhibitors, who will share with visitors their innovations in the fields of digitalisation of composites production, automotive manufacturing, building and construction, fibreglass, new mobility, thermoplastic materials and wind power.  

New ideas on special areas and joint stands
“Material and Production Technology” is the name of the new special area set up under the guidance of the Institute of Plastics Processing (IKV) of the RWTH Aachen University. In cooperation with other institutes such as the Aachen Center for Integrative Lightweight Production (AZL) the IKV will place manufacturing technology centre stage at the trade fair. In particular, the special area will trace the path from scientific development to practical, industrial implementation.

Tomorrow’s automotive experts will also be given a separate forum: under the heading “Formula Student” students and trainees will present to visitors racing cars and bikes they have engineered.

Lightweight Technologies Forum: platform for multi-material lightweight construction
Lightweight construction remains a driver across the board for many developments in the composites sector. The Lightweight Technologies Forum (LTF) held as part of COMPOSITES EUROPE makes it clear how lightweight construction can be achieved in an economical and resource-efficient manner. This Forum views itself as a cross-industry and multi-material think tank where all parties involved can reflect on these new concepts.

To this end, the Forum in Stuttgart pools lightweight construction projects from automotive manufacturing, aviation and aerospace and mechanical engineering, to name but a few industries that serve as a driving force for many sectors with high demands made on materials, security and reliability.  

This year’s keynote speakers include Airbus Innovation Manager Peter Pirklbauer, lightweight construction expert Prof. Jörg Wellnitz (TU Ingolstadt), Dutch racing driver Jeroen Bleekemolen and lightweight construction, aviation and aerospace specialist Claus Georg Bayreuther (AMC). In their talks they will provide an overview of reference projects and novel manufacturing and joining technologies.  

Combining its own exhibition space with a lecture forum, the LTF demonstrates how glass-fibre reinforced plastics (GRP) and carbon fibre reinforced plastics (CFRP) leverage their strengths mixed with other materials in hybrid structural components. Exhibitors at the Forum and in the neighbouring Lightweight Area include “Leichtbau-Zentrum Sachsen” (Lightweight Construction Center Saxony), Chem-Trend, Gößl + Pfaff, Krempel, Mitsui Chemicals Europe, Leichtbau BW, the VDMA, Gustav Gerster, Potters Ballotini (UK), Yuho (Japan), Riba Composites (Italy) and Stamixco (Switzerland) as well as the journals Lightweight Design (Springer Fachmedien) and Automobil Industrie (Vogel Communications Group), to name but a few.

“Ultralight in Space”: market study on lightweight construction trends in the aerospace industry
The aerospace industry has always served as a pioneer for ultra-lightweight construction pushing many disciplines to their limits as a driver of innovation. The latest technical trends are currently under scrutiny via a market study carried out by consultancy Automotive Management Consulting (AMC) in cooperation with the Luxembourg-based aerospace OEM GRADEL. The results will be presented for the first time at the LTF in Stuttgart on 10 September.  

Presentation of the AVK Innovation Prize
Innovative products and applications in fibre-reinforced plastics, manufacturing processes and the latest insights from research and science, will again be recognised by the German trade association AVK – Industrievereinigung Verstärkte Kunststoffe e. V. with its renowned Innovation Prize. The winners will be announced as part of the trade fair on 10 September and the award-winning products and projects will be on display in a special area.

Presentation of the SMB-BMC Design Award
The European Alliance for SMC BMC will announce the winners of the SMC BMC Design Award 2019 – also on 10 September. The contest already held for the second time now, honours and promotes the design excellence of students or young design professionals who use SMC and BMC components (sheet and bulk moulding compounds) in their designs. This year saw sustainable mobility take centre stage as a theme.

COMPOSITES Night
The event to celebrate the midway point of the trade fair: the COMPOSITES Night at the end of the second trade fair day offers visitors and exhibitors additional opportunities for networking. Participants are in for buffets and live music at the Stage Palladium Theater in Stuttgart.

Matchmaking programme makes trade fair visit more efficient
Thanks to the complimentary networking & meeting platform “matchmaking” visitors and exhibitors can already reach out to contacts in the run-up to COMPOSITES EUROPE. Who is at the trade fair? Who has answers to your specific questions? Who can you team up with to turn new ideas into practice? The matchmaking platform allows you to “filter” and make direct appointments with potential cooperation partners by product category, industry, country, or company.

Career & Composites
With its career&composites stand COMPOSITES EUROPE targets students and graduates who can come here to establish contact with potential employers. On the special area the exhibitors present their companies to interested junior employees and attract attention to vacancies and career opportunities via a Job Wall.

Co-located with Foam Expo Europe
COMPOSITES EUROPE will be co-located with Foam Expo Europe for the first time. This trade fair covers the supply chain of technical foam production and presents moulded, rigid and soft foam solutions – from raw materials to equipment and machinery. The parallel exhibition dates generate special synergies for gaining an overview of lightweight construction materials for such shared applications as the automotive, aviation, construction and sports & leisure industries.