Textination Newsline

Reset
5 results
photo: pixabay
04.01.2022

EU Project: System Circularity & Innovative Recycling of Textiles

SCIRT stands for System Circularity & Innovative Recycling of Textiles. Coordinated by VITO, an independent Flemish research organisation in the cleantech and sustainable development sector, SCIRT is a three year EU-funded project from the Horizon 2020 Programme.

It aims to demonstrate a complete textile-to-textile recycling system for discarded clothing—or post-consumer textiles—involving stakeholders throughout the value chain and focusing on the recycling of natural fibres, synthetic fibres and fibre blends. To reach this goal, the project has set four main objectives.

SCIRT stands for System Circularity & Innovative Recycling of Textiles. Coordinated by VITO, an independent Flemish research organisation in the cleantech and sustainable development sector, SCIRT is a three year EU-funded project from the Horizon 2020 Programme.

It aims to demonstrate a complete textile-to-textile recycling system for discarded clothing—or post-consumer textiles—involving stakeholders throughout the value chain and focusing on the recycling of natural fibres, synthetic fibres and fibre blends. To reach this goal, the project has set four main objectives.

  • Deliver a closed-loop recycling solution for discarded textiles.
  • Stimulate and encourage conscious design as well as production practices.
  • Create new business opportunities by boosting textile value chain activity.
  • Raise awareness of the environmental and social impacts of buying clothes.

Gathering 18 partners from five countries, the SCIRT project held its virtual kick-off meeting in mid-2021 to begin tackling the issue of clothing waste and recyclability, one of the biggest challenges faced in the fashion industry today.

As clothing brands are setting ambitious targets and making promises to incorporate recycled fibres in their products, discarded textiles are piling up in abundance around the globe. Though it would seem that the stars of supply and demand have aligned for this part of the circular economy, the truth is that less than 1% of textile waste is recycled into new textile fibres, according to an Ellen MacArthur Foundation report published in 2017. This miniscule percentage is indicative of a greater problem-achieving circularity in the fashion industry is not just a question of supply and demand, but of the connection between the two. There is a lack of knowledge surrounding the technological, economic and environmental feasibility of recycling fibre mixtures, and a need to align the quality and cost of recycling processes with the demands of textile companies and fashion brands.

SCIRT will develop solutions to support systemic innovation towards a more circular fashion system and bridge this supply-demand gap. To address the demand side of the equation, SCIRT will demonstrate a complete textile-to-textile recycling system for discarded clothing, otherwise known as post-consumer textiles, involving stakeholders throughout the value chain and focusing on the recycling of natural and synthetic fibres, as well as fibre blends. With the support of technical partners and research institutes, clothing brands Decathlon, Petit Bateau, Bel & Bo, HNST and Xandres, will develop, prototype and produce six different representative types of apparel using post-consumer recycled fibres. These include formal and casual wear, sportswear, underwear and uniforms. Through this endeavour, SCIRT will prioritise quality and cost-effectiveness in order to ensure market confidence and encourage the broad uptake of post-consumer recycled fibres.

From a non-technological perspective, SCIRT will develop supporting policy measures and tools to facilitate the transition towards a circular system for apparel. This includes a framework for an eco-modulated Extended Producer Responsibility (EPR) system and a True Cost Model to quantify circularity and increase value chain transparency. Special attention will also be given to the consumer perspective. To this end, Citizen Labs engaging consumers in various European locations, as well as a wider online engagement platform, will be developed to engage citizens throughout the project in order to understand the perceptions, motivations and emotions shaping their behaviour regarding the purchase, use, and disposal of textiles.

Over the next three years, SCIRT project partners will work to overcome current technological, economic, socio-economic and regulatory barriers faced in textiles recycling to achieve a real, lasting circular fashion economy.

2021:
The SCIRT project kicks off and partners identify the current state-of-the-art in apparel design, production and recycling, challenges and market trends, and stakeholder needs.

2022:
Designing and testing a fibre-to-fibre system by producing recycled yarns and filaments, free from harmful substances.

2023:
Formal wear, casual wear, sportswear, underwear and uniforms will be designed and produced using the optimized yarns developed.

Partners

  • Fashion companies: Bel&Bo, HNST, Decathlon, Xandres, Petit Bateau
  • Research organisations: VITO, CETI, Prospex Institute
  • Universities: BOKU, TU Wien, ESTIA
  • Industry players: Altex, AVS Spinning - A European Spinning Group (ESG) Company, Valvan
  • SMEs: Circular.fashion, FFact
  • Non-profit organisations: Flanders DC, IID-SII

 

ALTEX
ALTEX is a textile recycling company based in Germany that employs state-of-the-art machinery to recycle textile waste into new high-quality products. Its products include teared fibres, natural fibres, synthetic fibres and fibre blends among others.

Bel & Bo
Bel&Bo is a family-owned Belgian business with about 95 retail stores located throughout Belgium. Its mission is to offer colourful, fashionable and sustainably produced clothing for men, women and children at an affordable price.

CETI
The European Center for Innovative Textiles (CETI) is a non-profit organisation dedicated to conceiving, experimenting with and prototyping innovative textile materials and products through both private and collaborative R&D projects.

circular.fashion
circular.fashion offers software for circular design, intelligent textile sorting and closed-loop recycling, including the Circular Design Software and the circularity.ID®, as well as training and hands-on support to fashion brands in their transitions.

Decathlon
With over 315 stores in France, and 1,511 around the world, Decathlon has been innovating since 1976 to become the main player for athletic people. It has been engaged in reducing its environmental impact through a number of actions.

ESG
The European Spinning Group (ESG) is a textile group based in Belgium that offers a range of yarns produced with a highly technological open-end spinning mill for different applications, such as for interiors, fashion and technical textiles.

ESTIA
ESTIA is a French institute that has provided education and training in the areas of industrial technologies for 20 years. Since 2017, ESTIA has had a program focused on new materials and disruptive process in the fashion and textile industry.

FFACT
FFact is a unique group of management consultants that facilitates the implementation of sustainability from a business perspective, and translates facts into useful management information. FFact is based in the Netherlands and Belgium.

Flanders DC
The Flanders District of Creativity, a non-profit organisation based in Belgium, informs, coaches, promotes and inspires creative entrepreneurs in various sectors, including the fashion industry, who want to build or grow their business.

HNST
HNST is a Belgian circular denim brand that recovers post-consumer denim and recycles it into new fabric in the EU, creating durable and 100% recyclable jeans that use 82% less water and emit 76% less carbon dioxide than conventional jeans.

Petit Bateau
Petit Bateau is a French apparel brand that specialises in knit products. As a vertical company, Petit Bateau carries out its own knitting, dyeing, making up and store management with the support of its 3,000 employees.

Prospex Institute
The Prospex Institute aims to promote the participation of citizens and stakeholders in socially relevant decision-making dialogue and development by engaging with theorists and practitioners both in Belgium and abroad.

IID-SII
The Sustainable Innovation Institute is a French non-profit association based in Paris. Initiated by LGI, a French SME, the purpose of IID-SII is to act as a think and do tank on sustainable innovation to support the adoption of novel solutions.

TU Wien
TU Wien is an open academic institution where research, teaching and learning have taken place under the motto “Technology for people” for the past 200 years. One of its key areas of research is on recycling technology and fibre innovation.

BOKU
Research at the Institute for Environmental Biotechnology of BOKU based in Vienna, Austria focus on the exploitation of enzymes as powerful biocatalysts for biomaterials processing within recycling applications.

Valvan
Valvan Baling Systems has 30 years of experience in designing and constructing custom-made machinery, specialising in Baling Machines and Sorting Facilities for fibre producers, collectors, sorters and recyclers of textiles.

VITO
VITO, a leading independent European research and technology organisation in the cleantech and sustainable development sectors, aims to accelerate the transition towards a sustainable society by developing sustainable technologies.

Xandres
Xandres is a brand inspired by and for women. It is rooted in a highly respected tradition of fashion, driven by quality and created for the life women lead today. Xandres offers innovative designs with respect for luxury and the environment.

(c) STFI
14.12.2021

Funding Project Raw Material Classification of Recycled Fibers

For centuries, old textiles have been used to make tear fibers and processed into new textile products. This effective recycling is one of the oldest material cycles in the world. Today, it is not only clothing that is recycled, but also high-quality technical textiles. As the products of the textile industry evolve, so do the demands on textile recycling. The basis for this is a clear assessment and classification of raw materials.

For centuries, old textiles have been used to make tear fibers and processed into new textile products. This effective recycling is one of the oldest material cycles in the world. Today, it is not only clothing that is recycled, but also high-quality technical textiles. As the products of the textile industry evolve, so do the demands on textile recycling. The basis for this is a clear assessment and classification of raw materials.

In the research project of the German Institutes of Textile and Fiber Research Denkendorf (DITF) and the Sächsisches Textilforschungsinstitut e.V. (STFI - Saxony Textile Research Institute), a methodology is being developed that will make it possible to analyze the tearing as well as the subsequent processes with regard to fiber quality. The systematic analysis should make it possible to optimize the subsequent spinning processes in such a way that the recycled content of the yarn can be increased without the yarn properties differing significantly from those of a yarn consisting of 100% good fibers. These yarns can then be processed into sustainable textile products such as clothing or composite components.

The project, which is funded by the BMWi/IGF, is scheduled to run for two years and will end on December 31, 2022. The main benefits for the participating companies are to enable them to make greater use of secondary raw materials, to open up new markets through technologies or products developed in the project, to initiate synergies and long-term cooperation, and to prepare a joint market presence.    

The project includes several steps:

  • Material selection and procurement
    Cotton fibers to be processed are obtained from used textiles (T-shirts) and waste from the cotton spinning mill. Aramid fibers are processed from used protective clothing and technical textiles.
  • Optimization of the preparation / dissolution of the textiles
    To ensure that the fibers are detached from the corresponding textiles as gently as possible and with a not too high reduction, exact settings have to be found for the tearing process, which are technologically very demanding and require a lot of experience.
  • Determination of the quality criteria for the evaluation of the fiber dissolution
    In order to define the quality criteria, the fibers coming from the tearing mill are determined by means of an MDTA-4 measuring device from Textechno GmbH & Co. KG. The criteria determined are to be used to characterize the (lowest possible) fiber shortening caused by the tearing process.
  • Determination of optimized settings in the spinning process
    In order to determine the optimum settings for producing a yarn from the recycled fibers, they are spun after the rotor spinning process. By adjusting the spinning process, the aim is to produce a yarn that has good uniformity and also appropriate firmness.
  • Production and comparison of yarns from recycled raw materials
    In order that the recycled fibers - consisting of aramid and cotton - can each be used to produce an area-measured material, the material is to be processed at industrial scale. For this purpose, the fibers are processed over a complete blowroom line with following sliver production over adapted cards. After drawing and the following roving production, yarns are produced according to the rotor or ring spinning process. The finished yarns are used to produce knitted fabrics.
  • Coordination, analysis of results and preparation of reports
    The final report is prepared by the DITF and the STFI. The results will be transferred through publications, technical information to associations and trade fair presentations. Regular meetings with the participating companies are planned.

Textination spoke with Stephan Baz, Deputy Head of the Competence Center Staple Fiber, Weaving & Simulation, Head of Staple Fiber Technology and Markus Baumann, Research Associate at the Competence Center Staple Fiber, Weaving & Simulation (both DITF) as well as Bernd Gulich, Head of Department Nonwovens/Recycling and Johannes Leis, Research Associate Focus Nonwovens/Recycling (both STFI) about the current status of the funding project.

What is the current status of the project?
We are currently in the phase of carrying out trials and the iterative optimization of several project components. As expected, several loops are necessary for the mechanical preparation itself and also for the adjustment of the spinning process with the different variants. Ultimately, after all, the project aims at coordinating the processes of mechanical preparation and spinning as processing in order to achieve optimum results. At the same time, determining the quality criteria of the fibers produced is not trivial. This also requires the further development of processes and test methods that can be implemented productively in industry and that allow the quality of the fibers produced to be assessed effectively and unaffected by residual yarns, for example. What is really remarkable is the interest and willingness of the industry to drive the project work forward. The considerable quantities of materials required for our trials were purchased from ReSales Textilhandel und -recycling GmbH, Altex Textil-Recycling GmbH & Co. KG and Gebrüder Otto GmbH & Co. KG. Furthermore, with Temafa Maschinenfabrik GmbH, Nomaco GmbH & Co. KG, Schill + Seilacher GmbH, Spinnerei Neuhof GmbH & Co. KG and Maschinenfabrik Rieter AG, many members of the project-supporting committee are actively involved in the project, from consulting to the providing of technologies. The company Textechno Herbert Stein GmbH & Co. KG has provided a testing device of the type MDTA4 for the duration of the project and supports our work with regard to the evaluation of the mechanically prepared fibers. We are of course particularly pleased about this, as it has allowed us to look at and analyze several technologies in both mechanical preparation, testing and spinning. We expect to be able to make more detailed statements at the beginning of the coming year.

Which approaches do you think are particularly promising?
With regard to technologies, we must refer to the evaluation and analysis of the trials, which are currently still ongoing. We will be able to go into more detail in the first quarter of next year.

Of course, things are already emerging. With meta-aramid waste, promising approaches could be found very quickly; with post-consumer cotton, this is considerably more complex. Obviously, there is a link between the quality of the raw material and the quality of the products. In some cases, we have already been able to determine very low average fiber lengths in the procured goods; to a certain extent, these are of course directly reflected in the output of our processes. From this, and this is not a new finding, a great importance of the design of the textiles is again derived.

What are the challenges?
In addition to the expected high short fiber content, the residual yarns after the tearing process are an issue of particular focus. The proportion of these residual yarns can vary between the materials and preparation technologies, but the further dissolution of the products of the tearing process is essential.

If the processes are considered further in a utilization phase, the question of design naturally also arises for the best possible use of recycled fibers. Many problems, but also the approaches to solutions for the use of comparatively short fibers, can also be expected to apply to the (multiple) use of mechanically recycled fibers.

Can we speak of upcycling in the final product?
We see yarn-to-yarn recycling neither as upcycling nor downcycling, but as closed-loop recycling. The background is that the products are to go into the same application from which they came and have to compete with primary material. This means that certain specific requirements have to be met and at the same time there is considerable price pressure. In the case of downcycling, a significant reduction in properties is accepted, while in the case of upcycling, the higher-priced application can make up for the reprocessing effort. In the attempt to produce yarn material again from yarn material, both are only permissible to a small extent. This represents the particular challenge.

What does a recyclate prepared from used textiles mean for the spinning process?
Part of this question is to be answered in the project by the detailed classification of the processed fibers and is thus the subject of the tests currently underway. It turns out that, in addition to the rather obvious points such as significantly reduced fiber length, process disturbances due to undissolved fabrics and yarn pieces, there are also less obvious aspects to be considered, such as a significantly increased outgoing quantity for processing in the spinning process. The outgoing quantity is of particular interest here, because in the end the newly produced yarn should also contain a considerable proportion of prepared fibers.

What consequences does this have for textile machinery manufacturing?
The consequences that can already be estimated at the present time are that, particularly in the processing of cotton, the machinery in the spinning preparatory mill is specialized in the processing of (new) natural fibers with a certain amount of dirt. In contrast to new fibers, processed fibers are clean fibers with a significantly higher proportion of short fibers. Elements that are good at removing dirt also reject an increased amount of short fibers, which can lead to unintentionally high waste quantities under certain circumstances. It is therefore necessary to adapt the established machine technology to the new requirement profile of the raw material "processed fibers". Analogous adaptations are probably necessary along the entire processing chain up to the yarn. In the drafting system of the spinning machine, of course, this is due more to the high short fiber ratio than to elements that have been optimized for cleaning out dirt and foreign substances.

Source:

Textination GmbH

(c) PERFORMANCE DAYS
16.11.2021

PERFORMANCE DAYS 2021: Hybrid Event in December

From December 1 to 2, 2021, the industry will meet up again live at the trade fair center in Munich. Trade visitors, industry insiders and experts can look forward to inter-personal exchanges, intensive networking, exciting fabric innovations and various other program highlights. The fair will go ahead in strict compliance with the current official hygiene regulations and in close cooperation with the Messe München authorities. Planned as a hybrid event, PERFORMANCE DAYS offers the possibility to follow what is on offer digitally.

From December 1 to 2, 2021, the industry will meet up again live at the trade fair center in Munich. Trade visitors, industry insiders and experts can look forward to inter-personal exchanges, intensive networking, exciting fabric innovations and various other program highlights. The fair will go ahead in strict compliance with the current official hygiene regulations and in close cooperation with the Messe München authorities. Planned as a hybrid event, PERFORMANCE DAYS offers the possibility to follow what is on offer digitally.

Live in Munich: PERFORMANCE DAYS in Hall A6
In Hall A6 on the grounds of the New Trade Center in Munich, trade visitors can look forward to an extensive portfolio of exhibitors showcasing their latest functional textiles and fabric innovations for the upcoming winter season, winter 2023/24. Exhibitors who are unable to present their highlights on site can also be accessed via the PERFORMANCE DAYS LOOP digital platform throughout the course of the fair. As part of the newly developed “remote booths” concept, trade visitors will for the first time also find collections from exhibitors who cannot be in Munich in person for the trade show. Interactive exchanges via chat, call or video call is planned.

Two further PERFORMANCE DAYS fairs are planned as live events: The Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon, USA on November 17-18, 2021 and Functional Textiles Shanghai by PERFORMANCE DAYS on December 6-7, 2021. Registration is open at www.functionalfabricfair.com/ and www.functionaltextilesshanghai.com/

PERFORMANCE FORUM together with USA Fair
As part of the PERFORMANCE FORUM, a select jury of experts assembles for two days prior to the fair to exchange views on the latest fabric innovations for the winter 23/24 season. In order to ensure a more global market overview, the PERFORMANCE FORUM will curate highlights for the first time in conjunction with the US fair in Portland. Consequently, the next fair in Munich will not only feature the latest products from exhibitors at the Munich fair, but also highlights from the fair in Portland. This year’s Focus Topic in cooperation with the Vaude Academy will engage with the topic “The Sustainable Future of Nylon” and a specific hand-chosen selection of fabric materials. Furthermore, as part of the winter fair, the “sustain & innovate” conference on sustainability, organized in close cooperation with SAZsport, will take an in-depth look at the topic comprising all its aspects along with speakers, webinars and discussion rounds. The program will be broadcast live from the fair and thus accessible for all who wish to follow it online in digital form.  

Eco Award and Performance Award for Innovative Winter Fabrics 23/24
This year, in addition to a PERFORMANCE AWARD, the jury also presented an ECO PERFORMANCE AWARD. An integral part of the winter edition of PERFORMANCE DAYS is the presentation of the fabric highlights and accessory trends in the respective categories for the Winter Season 2023/24 at the PERFORMANCE FORUM. The well-known segments will be joined for the first time this winter by the Shoes & Bags category, while the renowned Lifestyle Category will be continued under its new title, “Function Meets Fashion”. The high level of innovation and quality of many of the fabrics submitted this year are particularly striking.

“The fusion of the two PERFORMANCE FORUMs of our fairs in Munich and Portland has lead to a significant increase in quality and innovation. Thanks to the new partnership, not only were we able to get new, exciting manufacturers on board, but there was also a significant increase in participation in general“, says Marco Weichert, CEO of PERFORMANCE DAYS.

Natural fabrics such as organic cotton, wool or canvas remain in demand. These are joined by significantly more plant fibers such as hemp, coconut shell, bamboo or fibers derived from pineapple or banana leaves. The additional use of castor oil, zinc or ginger supports the antibacterial effect, ensures enhanced breathability, optimum temperature management and makes the fabric soft, light and kind to the skin. The topic of recycling presents itself in various new facets and features exciting trends. The portfolio ranges from the recycling of marine waste, such as old buoys, plastic waste or fishing nets, to the recycling of waste from the automotive and computer industries, such as old car tires or computer chips. Natural dyeing methods are also gaining increasing importance, as is the recycling of materials into the textile loop.

In the Marketplace, visitors have the opportunity to view over 13,000+ products from exhibitors, including the fabric highlights of the individual categories at the PERFORMANCE FORUM. In order to be able to present the fabrics to the digital visitors as realistically as possible in terms of feel, design and structure, the PERFORMANCE FORUM has been equipped with groundbreaking 3D technology, including innovative tools such as 3D images, video animations and U3M files for download.

In addition to the PERFORMANCE AWARD WINNER, which goes to drielease/Optimer, there is also an ECO PERFORMANCE AWARD WINNER, awarded to Long Advance.

Completely new look: With the innovative Dricomfort Geo, drirelease turns to a blend of 6 % Lycra, 44 % polyester and 50 % recycled polyester. The processing of the various fibers in the knitting process, in combination with the Dricomfort GEO finishing, makes the reversible interlock fabric unique.

Unique, new pattern and knit designs are possible thanks to a special jacquard knitting process used to process the recycled polyester yarn. The material impresses with its lightness and versatility. The GEO technology also ensures optimal body temperature management. The adaptable technology provides excellent thermal regulation features through efficient heat management and enhanced moisture transport to optimize comfort and performance. Moreover, GEO boasts UV protection up to 50+.

New recycling variant: Long Advance presents LNT-21191-Z4C, a post consumer nylon that opens up a new world to recycling. The fabric, which consists of 7 % elastane and 93% recycled polyamide via Mass Balance, introduces new facets to the topic of recycling. BASF is using tire waste from now on and processes them into a new fiber. fiber. Due to the recycling, the need for synthetic fabrics are reduced to replace petroleum-based plastics with plastics made from renewable raw materials.

09.03.2021

Functional Textiles Shanghai by PERFORMANCE DAYS celebrates its Chinese premiere

Design & Development GmbH Textile Consult, founder and trade fair organiser of PERFORMANCE DAYS in Munich, is eyeing the new year with a lot of hope. After the launch of Functional Fabric Fair by PERFORMANCE DAYS in New York City and Portland together with Reed Exhibitions, PERFORMANCE DAYS is further expanding its portfolio. In cooperation with Tengda Exhibition, the foundations have been laid for a new trade fair for functional textiles in Shanghai. On the 28th and 29th of September 2021, the FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS will premiere at the renowned Shanghaimart Exhibition Center, offering ample space for future trends displayed by more than 100 exhibitors.

Design & Development GmbH Textile Consult, founder and trade fair organiser of PERFORMANCE DAYS in Munich, is eyeing the new year with a lot of hope. After the launch of Functional Fabric Fair by PERFORMANCE DAYS in New York City and Portland together with Reed Exhibitions, PERFORMANCE DAYS is further expanding its portfolio. In cooperation with Tengda Exhibition, the foundations have been laid for a new trade fair for functional textiles in Shanghai. On the 28th and 29th of September 2021, the FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS will premiere at the renowned Shanghaimart Exhibition Center, offering ample space for future trends displayed by more than 100 exhibitors.

As the new year is entered, the PERFORMANCE DAYS team looks forward with great optimism and confidence to the launch of the new fair for functional textiles - the FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS - in Shanghai. China counts as one of the fastest growing and more important future markets worldwide, especially when it comes to functional apparel. The oriental gateway is proving to be innovative, trendsetting, and more recently, increasingly sustainable.

This development is also reflected in the activities of yarn and fabric producers, with local sportswear brands enjoying significant growth. One can be particularly proud of the cooperation with Tengda Exhibition, which is renowned for providing professional services for manufacturers and trading companies in the textile, fibre and various apparel segments. Their services range from fairs to sourcing events in China, Japan, Spain, Great Britain and Turkey.

The premiere of FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS will be held at Shanghaimart Exhibition Center on the 28th and 29th of September. Here too, a conscious decision was made for specifically choosing it as an influential trade fair and trading centre. At present, almost 1.000 companies from more than 20 countries and regions have set up offices and showrooms on site, most of them renowned industry experts from the textile and fabric branches.

Qualitative, informative & innovative: Shanghai fair borrows from the Look & Feel of PERFORMANCE DAYS
The FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS event team will transfer the already established concept of PERFORMANCE DAYS from Munich to Shanghai. This will lend the fair in China not only the Look & Feel of a familiar concept, but above all the same aspirations in terms of quality. And indeed with a total of 5.300 square metres, more than 100 Chinese and international exhibitors will have sufficient exhibition space. In line with this, the fair organisers wish to guarantee industry visitors to the fair a balanced assortment of top brands from the world of functional textiles.

The fair will focus on the latest trends and innovations from the world of textiles, yarns, membrane technologies and accessories for functional sportswear, workwear, performances wear and lifestyle wear. Demand is accordingly high, with top manufacturers such as Romrol, Sanchuan and Winsun confirming their participation along with other well-known brands such as Anta, Bosideng, Decathlon, Descente, Eral, Fila Hotwind, Icicle, Jeep, Kailas, Kappa, Li-Ning, Peace Bird, Peak, Semir, Skechers, Toread, Uniqulo, Zuczug and 361°, to name a few.

As is usual at the trade fair in Munich, there will also be an informative supporting program with exciting expert talks and discussion panels on sustainable and industry-relevant topics. The centrepiece of the fair, the PERFORMANCE FORUM, rounds off the comprehensive package. Materials from exhibitors curated on-site will be displayed on this specially designed platform. Trade fair general manager Marco Weichert had this to say: “We are thrilled to be starting the new year with such inspiring new projects. The launch of FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS in September is the result of many years of monitoring of the Asian market and its increasing demand for curated and high quality sustainable offerings. We are especially pleased about the partnership with Tengda Exhibition, who are real professionals in this field. We are absolutely convinced that the PERFORMANCE DAYS concept, which we will adopt in Shanghai, will be very well received by local trade fair visitors and exhibitors.”

Noel Tian, Managing Director, Tengda Exhibition, adds: “The functional apparel market in China is growing so fast, the brands here need one professional, focused and high class platform for functional textiles just like PERFORMANCE DAYS. We are really excited to launch FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS while adopting 100% the PERFORMANCE DAYS concept in the special new year 2021. It is a great honour to have this partnership with Design & Development GbmH Textile Consult and their world famous trade fair brand.“

FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS
September 28-29th, 2021
Shanghaimart Exhibition Center No.99 Xingyi Road,Chang Ning District,Shanghai China
Contact:
info@functionaltextilesshanghai.com or +86-21-60493344.

Source:

PERFORMANCE DAYS functional fabric fair

Texprocess 2017 © Messe Frankfurt Exhibition GmbH
18.04.2017

DIGITAL TEXTILE PRINTING A FOCAL-POINT THEME AT TEXPROCESS

  • First European Digital Textile Conference at Texprocess
  • Exhibitors present the latest digital-printing Technologies

Colour and function: digital textile printing is one of the focal-point themes at this year’s Texprocess. For the first time, the World Textile Information Network (WTiN) is holding the European Digital Textile Conference at Texprocess. And there will be a separate lecture block on digital printing in the programme of the Texprocess Forum. Moreover, the Digital Textile Microfactory in Hall 6.0 will present a textile production chain in action – from design, via digital printing and cutting, to making up. As well, numerous exhibitors, including Brother, Epson, Ergosoft and Mimaki, will be showing digital printing technologies.

  • First European Digital Textile Conference at Texprocess
  • Exhibitors present the latest digital-printing Technologies

Colour and function: digital textile printing is one of the focal-point themes at this year’s Texprocess. For the first time, the World Textile Information Network (WTiN) is holding the European Digital Textile Conference at Texprocess. And there will be a separate lecture block on digital printing in the programme of the Texprocess Forum. Moreover, the Digital Textile Microfactory in Hall 6.0 will present a textile production chain in action – from design, via digital printing and cutting, to making up. As well, numerous exhibitors, including Brother, Epson, Ergosoft and Mimaki, will be showing digital printing technologies.

„“We are expanding our programme on the subject of digital printing in response to the growing demand for digitalised technologies for processing garments, technical textiles and flexible materials. This programme is of particular interest to manufacturers of technical textiles and companies that process textiles”, says Michael Jänecke, Head of Brand Management, Textiles and Textile Technologies, Messe Frankfurt.

Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies: “Thanks to digital textile printing, it is now possible to print apparel, shoes and technical textiles directly. Given the general trend towards individualisation, demand for individualised products is increasing in the apparel industry. This is turning digital textile printing into one of the future-oriented technologies for companies that process garments and textiles.”

European Digital Textile Conference at Texprocess

In cooperation with Texprocess and Techtextil, the World Textile Information Network (WTiN) will hold the European Digital Textile Conference at Texprocess for the first time. The focus of the conference will be on digital textile printing for adding functional and decorative features to technical textiles. The WTiN European Digital Textile Conference will take place in ‘Saal Europa’ of Hall 4.0 from 09.00 to 16.30 hrs on
10 May. Tickets for the conference can be obtained from WTiN under
https://www.digitaltextileconference.com/edtc2017/

The subjects to be covered in the lectures include direct yarn colouring in the embroidery plants (Coloreel, Sweden), plasma pre-treatment for textiles before digital printing (GRINP, Italy) and chemical finishing for textiles using inkjet printing technology (EFI-REGGIANI, USA).

Texprocess Forum to spotlight digital printing technology

Digital printing technology will also be the subject of a separate lecture block at Texprocess Forum. At this international conference, experts from science and industry will focus on the latest findings relating to subjects of major importance to the sector in over 30 lectures and panel discussions on all four days of the fair. Texprocess Forum is free of charge for visitors of Texprocess and Techtextil and will be held in Hall 6.0. For the first time, three partner organisations are organising the lecture blocks: DTB – Dialogue Textile Apparel, the International Apparel Federation (IAF) and the World Textile Information Network (WTiN).

Digital Textile Microfactory

In cooperation with the German Institutes of Textile and Fibre Research Denkendorf (DITF) and renowned textile companies, Texprocess presents the complete interlinked textile production chain – the Digital Textile Microfactory – live in Hall 6.0. The digital-printing station shows large-scale inkjet printing in the form of sublimation printing on polyester and pigment printing on cotton and blended fabrics. Production orders can be combined flexibly and printed colour consistently with a variety of printing parameters. Ensuring optimum printing results at this station are hardware and software partners, Mimaki and Ergosoft, and Coldenhove and Monti Antonio. In addition to the Microfactory partners, other renowned companies, including Brother and Epson, will be showing state-of-the-art printing processes for textiles and apparel at Texprocess.

Digital-printing Outlook

Originally developed for fashion fabrics, digital textile printing is also used for printing technical textiles, such as sports clothing, and textiles for the automobile industry whereby the primary focus is on functionalising textiles. For example, swimwear can be made more colour fast to resist frequent contact with water and chlorine, and exposure to the sun. Also, textiles can be finished by applying chemicals via an inkjet printer and thus be given dirt-repellent, antimicrobial and fire-retardant properties. Additionally, using an inkjet printer in the finishing process is advantageous in terms of sustainability and efficiency.