Textination Newsline

Reset
32 results
(c) Nadine Glad
18.07.2023

Promoting transparent supply chains and a more circular economy with digital product passports

Any prospective buyer interested in knowing more about the products they have set their eyes on will have to cope with limited information on print or online manuals or engage in time-consuming research. This may change soon, as the European Commission introduced a standardised digital product passport for the upcoming legislation. A project consortium has been formed with partners from industry and academia to set ground for the developments. The idea is for the proposed passports, supported by EU regulations, to make all product information available along the entire value chain and easily accessible e.g. by QR code.

Any prospective buyer interested in knowing more about the products they have set their eyes on will have to cope with limited information on print or online manuals or engage in time-consuming research. This may change soon, as the European Commission introduced a standardised digital product passport for the upcoming legislation. A project consortium has been formed with partners from industry and academia to set ground for the developments. The idea is for the proposed passports, supported by EU regulations, to make all product information available along the entire value chain and easily accessible e.g. by QR code.

ID cards and passports are usually the first things packed when one goes on a journey. They are internationally recognized and accepted documents with all the necessary information about the holder: Commonplace items for people that will soon become just as common for electronic devices, textiles, or batteries. But mobile phones, tablet computers, and their kin usually do not travel with a passport pouch, so their digital product passports with all their “personal details” will soon be accessible at every link in the value chain via a QR code or RFID chip.

Consumers looking to buy a new piece of clothing, a piece of electronics, or even furniture or toys should have more means to understand important information about their products, including their energy efficiency, the labor conditions during manufacturing, or their reparability, in order to make informed and sustainable purchasing choices.

Product passports also hold great potential for other actors, e.g. for repairs or recycling. Current electronic products, often highly miniaturized, make it hard to understand with materials, not least toxic substances are contained and how they could be separated from another. Use-specific certificates can regulate that this type of information is available to the people who need to know it.

No final decision has yet been made about the range of information that will be contained in the product passports. For the CIRPASS project, Eduard Wagner and his team at Fraunhofer ZM is currently surveying which types of information are already covered by current legal requirements and which additional information could be contained on a digital product passport. Their aim is to provide an information architecture that determines which types of information have added value for which actors in the value chain and at what cost this information could be provided. A reparability scale that shows how easily a product is to repair has been required in France since 2021 and might be a good inclusion in the digital, pan-European product passport. “Information about energy efficiency is already required, but this information still has to be prepared on a case-by-case basis, and there are no universal European disclosure requirements for other types of circularity related information. Meaningful standardization here is one of the top goals of the product passport. Imagine we could compare the durability of all t-shirts in the EU between each other,” says sustainability expert Eduard Wagner.

For the first product passports to be ready by 2026, many actors still need to be brought on board and a consensus be found for which information is most relevant. “Our project has identified 23 groups of stakeholders that we are including in our survey of requirements, in all three sectors”, Wagner explains. “We have suppliers of materials, manufacturers of electronics, and representatives of repair and recycling associations with us.” The results of these consultations will go to the European Commission to act as pointers for the political process en route to new legal requirements for the product passport. Small to medium-sized enterprises are given special attention and support in this, as providing the required information can mean a considerable effort on their part.

Source:

Fraunhofer Institute for Reliability and Microintegration IZM

Swijin Inage Swijin
20.06.2023

Innovative sportswear: Swim and run without changing

Just in time for summer: The Swiss start-up Swijin is launching a new sportswear category with its SwimRunner – a sports bra together with matching bottoms that works as both swimwear and running gear and dries in no time. The innovative product was developed together with Empa researchers in an Innosuisse project. The SwimRunner can be tested this weekend at the Zurich City Triathlon.
 
A quick dip after jogging without having to change clothes? Swijin (pronounced Swie-Djin), a new Swiss TechTex start-up, is launching its first product, the SwimRunner: a sports bra and bottoms that function as both swimwear and running gear and dry in a flash.

Just in time for summer: The Swiss start-up Swijin is launching a new sportswear category with its SwimRunner – a sports bra together with matching bottoms that works as both swimwear and running gear and dries in no time. The innovative product was developed together with Empa researchers in an Innosuisse project. The SwimRunner can be tested this weekend at the Zurich City Triathlon.
 
A quick dip after jogging without having to change clothes? Swijin (pronounced Swie-Djin), a new Swiss TechTex start-up, is launching its first product, the SwimRunner: a sports bra and bottoms that function as both swimwear and running gear and dry in a flash.

For the first time, this innovation enables women to make a smooth transition between land and water sports without having to change clothes. For example, hikers and runners can easily go into the water to cool off. Stand-up paddlers wearing the SwimRunner enjoy unrestricted freedom of movement and at the same time sufficient support, both on the board and in the water.
Science to boost sports performance
 
What appears to be a relatively simple requirement at first glance has turned out to be an extremely complex product to develop. As part of an Innosuisse project, Swijin collaborated with the Empa Biomimetic Membranes and Textiles laboratory in St. Gallen. Led by Empa engineer Martin Camenzind, the researchers first defined the requirements for the material and cut of the sports bra. "During development, we faced three main challenges: On the one hand, the product had to meet the requirements of a heavy-duty sports bra on land. At the same time, it had to maintain the compression of a swimsuit in the water – and do so with a very short drying time," says Camenzind.

Since no comparable garment exists on the market yet, the team also developed new tests for evaluating the high-performance textile. "Moreover, we designed a mannequin: a model of the female torso that can be used to measure the mechanical properties of bras," explains the researcher. In addition to scientific findings, the product development process also incorporated a great deal of expertise from sports physiologists, textile engineers, industry specialists, designers and, of course, female athletes.

Highest demands
Many of these athletes come from the swimrun scene. Swimrun is a fast-growing adventure sport that originated in the skerry gardens of Sweden. Unlike triathletes, who start out by swimming, then bike, and finally run, swimrunners switch back and forth between trail running and open water swimming throughout the race. The intensity of this sport provided Swijin with the optimal conditions for product development – and gave its name to the first collection, SwimRunner. "The feedback from female athletes was one of the deciding factors for the success of the product. They often swim and run for six to seven hours at a stretch. When they were satisfied with our prototypes, we knew: The SwimRunner is ready for market," says Swijin founder Claudia Glass.

The product idea first came to Claudia Glass while she was on vacation on Mallorca. During her morning runs, she longed to be able to take a quick dip in the sea. "Sports bras, however, are not designed for swimming," the founder explains. "They soak up the water and never seem to dry because of their thick compression material. Last summer, I wore the SwimRunner prototype all day. In the morning, I ran to Lake Zurich with my dog and jumped in. When I got back home, I could have just sat down at my desk and started working – I was completely dry and felt very comfortable."

Design and sustainability
The young company makes a point of combining engineering and design. Swijin's creative director, Valeria Cereda, is based in the center of the world's fashion capital, Milan, and infuses her experience with luxury brands into Swijin's aesthetic. But as a former competitive swimmer, she is also focused on functionality.

Swijin's high-performance products can only be realized with synthetic materials. The young company is determined to reduce the environmental impact of its products to a minimum. The tight supply chain keeps the CO2 footprint low. The materials of the SwimRunner are 100% made in the EU and designed for quality.

Traditional garment labels only provide information about where the garment was made. Swijin is working with supplier Avery Dennison to provide all products with a Digital Identity Label. This gives consumers detailed information about the entire value chain, right down to the textile manufacturer's investment in reducing its carbon footprint and the use of the water-based, solvent-free logo. Swijin packages all materials in Cradle-to-Cradle Gold certified packaging, which is produced by Voegeli AG in Emmental.

Furthermore, Swijin proactively addresses the challenges at the end of the product life cycle. In order to come one step closer to a truly circular economy for functional textiles, Swijin participates in the Yarn-to-Yarn® pilot project of Rheiazymes AG as a lighthouse partner. This biotech solution uses microorganisms and enzymes to generate new starting materials directly from used textiles in a climate-neutral way. When customers return end-of-life Swijin products – for which the company offers incentives – the high-quality monomers can be returned to the supply chain in their original quality: true circularity.

"As an emerging brand, we have both the obligation and the luxury of choosing partners whose vision and values align with our own," says Claudia Glass. "I had a clear understanding of what kind of brand I would buy, but I couldn't find it anywhere. With Swijin, we feel obligated to actually make our values a reality."

Source:

Claudia Glass, Anna Ettlin, EMPA

08.03.2023

Composites Germany presents results of 20th market survey

  • General economic developments are dampening mood in composites industry
  • Future expectations are optimistic
  • Investment climate has remained stable
  • Varying expectations for application industries
  • Growth drivers have remained unchanged
  • Composites Index is pointing in different directions

This is the 20th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the umbrella organisations of Composites Germany: AVK and Composites United, as well as the associated partner VDMA.  

  • General economic developments are dampening mood in composites industry
  • Future expectations are optimistic
  • Investment climate has remained stable
  • Varying expectations for application industries
  • Growth drivers have remained unchanged
  • Composites Index is pointing in different directions

This is the 20th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the umbrella organisations of Composites Germany: AVK and Composites United, as well as the associated partner VDMA.  

General economic developments are dampening mood in composite industry
Like all industries, the composite industry has been affected by strong negative forces in recent years. The main challenges over the last few years have been the Covid pandemic, a shortage of semiconductors, supply chain problems and a sharp rise in the price of raw materials. Furthermore, there have been numerous isolated effects that added to the pressure on the industry.

The main challenges during the past year were primarily a steep increase in energy and fuel prices and the cost of logistics. In addition, the war in Ukraine put a further strain on supply chains that had already been weakened.

Overall, the stock market prices for both electricity and petroleum products are currently showing a clear downward trend. However, the significantly lower prices have not yet percolated from manufacturers and buyers to the end customer.

The aforementioned effects have further dampened the mood in the composites industry. The index assessing the current general business situation in Germany and Europe has dropped even further than before. However, the assessment of the global situation is somewhat more positive.

Despite this generally negative assessment of the current situation, companies are moving in a somewhat more positive direction in the assessment of their own business situations. The companies that were surveyed rated their own positions more positively than in the last survey.

Future expectations are optimistic
The expectations on future market developments are showing a very positive picture. After a significant drop in the last survey, the indicators for the general business situation are now displaying a clear upward trend again. Moreover, respondents were far more optimistic about their own companies’ future prospects.

Investment climate remaining stable
The investment climate has remained at a stable level. Nearly half of the companies surveyed are planning to employ new staff over the next six months. As before, about 70% of respondents are either considering or planning machine investments. Unlike in the previous survey, this value has remained almost unchanged.

Varying expectations for application industries
The composites market is highly heterogeneous in terms of both materials and applications. In the survey, respondents were asked to assess the market developments of different core areas. Expectations turned out to be extremely diverse.

The most important application segment for composites is the transport sector. The number of new registrations of passenger cars has been declining in recent years. This is where we can see OEMs moving away from volume models and opting for more profitable mid-range and premium segments. In this year’s survey, this shows itself in relatively cautious expectations for this segment.

The currently rather pessimistic outlook for the construction industry is leading companies to expect major slumps in this sector, in particular. The building sector, in particular, often reacts rather slowly to short-term economic fluctuations and has long been relatively robust towards the aforementioned crises. Now, however, it seems that this area, too, is being affected by negative influences.

The pessimistic outlook on the sports and leisure sector can be explained by a rather pessimistic view of consumer behaviour.

Expectations about future market developments, on the other hand, are significantly more positive than the figures presented here might suggest.

Growth drivers still stable
As before, the current survey shows Germany, Europe and Asia as the global regions expected to deliver the most important growth stimuli for the composites segment, with Europe playing a key role for many of the respondents.

Where materials are concerned, we are seeing a continuation of the ongoing paradigm shift. Whereas, in the first 13 surveys, respondents always believed that the composites segment would receive its prevailing growth stimuli from CRP, there is now an almost universal expectation that the most important stimuli will be coming from GRP or from all the materials.

Composites Index points in different directions
Despite the many negative influences that have occurred recently, composites appear to be in good shape for the future. Thanks to excellent market developments in 2021, they have almost reached their pre-pandemic level. The outlook for market developments in 2022 have not been finalised but are showing a less positive trend for last year.

Nevertheless, there are many indications to suggest that the generally positive development of the composite industry over the last few years is set to continue. In the medium term, structural changes in the transport sector will open up opportunities for composites to gain a new foothold in new applications. Major opportunities can be seen in areas of construction and infrastructure. Despite the rather weak market situation, these areas offer enormous opportunities for composites, due to their unique properties which predestine them for long-term use. The main assets of these materials are their durability, their almost maintenance-free use, their potential for use in lightweight construction and their positive impact on sustainability. Furthermore, one major growth driver is likely to be the wind industry, provided that it meets the politically self-imposed targets for the share of renewable energies in power consumption.

Overall, the Composites Index shows a restrained assessment of the current situation, whereas the assessment of the future situation is clearly positive. Respondents are apparently optimistic about the future, reflecting the assessment mentioned above: Composites have been used in industry and in serial production for several decades and, despite numerous challenges, they are set to provide immense potential for exploring new areas of application.

The next Composites Market Survey will be published in July 2023.

Source:

Composites Germany

Photo: pixabay
08.02.2023

6 out of 10 consumers pay attention to sustainability criteria when shopping

ESG aspects are most important to consumers when it comes to food and clothing. Young people in particular demand information and transparency: sustainability labels, certifications and reports ensure trust. For retailers and manufacturers, sustainability is becoming a must.

Under what conditions are the cows kept whose milk I drink? Does the manufacturer of my new T-shirt tolerate child labor? Does the retailer I trust deal fairly with employees and business partners? The majority of Germans ask themselves questions like these before making a purchasing decision. When shopping, 59 percent of consumers always or at least frequently pay attention to the ecological, economic or social sustainability of retailers and manufacturers. Among those under 35, the figure is even hugher with two-thirds, and among those over 55, one in two. These are the findings of a representative survey of 1,000 people in Germany commissioned by the auditing and consulting firm PwC Germany.

ESG aspects are most important to consumers when it comes to food and clothing. Young people in particular demand information and transparency: sustainability labels, certifications and reports ensure trust. For retailers and manufacturers, sustainability is becoming a must.

Under what conditions are the cows kept whose milk I drink? Does the manufacturer of my new T-shirt tolerate child labor? Does the retailer I trust deal fairly with employees and business partners? The majority of Germans ask themselves questions like these before making a purchasing decision. When shopping, 59 percent of consumers always or at least frequently pay attention to the ecological, economic or social sustainability of retailers and manufacturers. Among those under 35, the figure is even hugher with two-thirds, and among those over 55, one in two. These are the findings of a representative survey of 1,000 people in Germany commissioned by the auditing and consulting firm PwC Germany.

Sustainability is no longer a question of "if", but "how".
"Sustainability has become mainstream in recent years. For companies, paying attention to sustainability in their supply chains has already become a must," comments Dr. Christian Wulff. The Head of Retail and Consumer Goods at PwC Germany is convinced that companies will already have to give good reasons in the near future if they do not pay attention to the environment, social aspects and good corporate governance when producing a product. "The issue of sustainability is therefore no longer a question of whether, but of how," the retail expert continues.

Sustainability includes various aspects in the three areas of environment, social and sustainable governance (ESG). In the case of environmental sustainability, the focus is on issues relating to animal welfare - such as the conditions in which animals are kept or animal testing - and the use of recyclable materials. 40 percent of Germans would like to be informed about this before making a purchase. In the social sphere, the majority of respondents would like to know whether retailers and manufacturers comply with human rights (58 percent) - for example, whether they tolerate forced or child labor in their value chains. In terms of governance, one in two respondents would like to know about supply chains and be able to trace products before making a purchase.

Sustainability is particularly important for food
How closely consumers look at sustainability also depends on the product: For example, sustainability is particularly important to them when it comes to food. 81 percent of Germans pay attention to at least one of the three ESG criteria when buying food, i.e. environment, social issues or good corporate governance. But these criteria are also relevant when buying textiles: As many as 63 percent say they look at how sustainably the item was produced when buying clothing or shoes. While environmental aspects play the biggest role for food (62 percent), consumers are paying more attention to social aspects for clothing, shoes and accessories (52 percent).

Almost every second person has recently switched to sustainable products
The growing importance of ESG aspects in the purchasing behavior of German consumers is also evidenced by the shifts toward buying sustainable products. The trend toward sustainable products is clearest in the case of food: 45 percent of respondents state that they have consciously switched to more sustainable products within the past two years. By contrast, only 17 percent admit to switching (back) to less sustainable products, with one in three stating a lack of financial resources as the reason.

For just under half of those surveyed, a possible switch to more sustainable products would be supported by better availability in stationary retail. Legal regulations are also seen as helpful, both in terms of product labeling (38 percent) and for the production process (37 percent). More eye-catching product placement in stores would also help (37 percent).

Young people in particular demand transparency and education
Consumers' need for transparency in ESG matters is significant: According to the survey, almost three quarters of Germans obtain information about environmental sustainability issues at least occasionally. Two-thirds research aspects of social sustainability. A good half regularly find out about sustainable corporate governance.

Age has a major influence on how intensively people deal with the issue: While 80 percent of 16- to 24-year-olds find out about the environmental aspects of a product before buying it, only 59 percent of those over 65 do. "Younger people in particular are actively informing themselves and demanding transparency around ESG criteria," sums up Christian Wulff.

Consumers want information on packaging and online
To meet this need for information, the PwC expert advises manufacturers and retailers to provide detailed information about ESG aspects of products, especially online. "Keeping the associated, significantly increasing flood of data up to date at all times is increasingly becoming a challenge for companies that can only be solved by significant investments in new technologies."

Consumers agree on what companies can do to lend more credibility to their sustainability activities: A solid two-thirds consider recognized sustainability labels, certifications or independently audited sustainability reports to be suitable for credibly communicating activities in terms of ESG. "The results of our survey show that labels and independent certifications are very important in gaining the trust of customers. It is therefore worthwhile to have ESG measures confirmed by external organizations," says Christian Wulff.

Retailers and manufacturers should focus on transparency
"Manufacturers and retailers are faced with the task of ensuring a high level of transparency with regard to the sustainability of their products. This calls for honesty, but also creativity: In the case of fashion, for example, it is conceivable to trace the individual stages of the supply chain in detail and to show the costs incurred in the process. In this way, consumers can understand exactly how a price comes about," concludes Christian Wulff.

Source:

PwC / Textination

(c) INNATEX – international trade fair for sustainable textiles
06.12.2022

51st INNATEX targets the topic of conventional retail

International trade fair for Green Fashion focuses on new formats and strategic partnerships:

From 21 to 23 January 2023, INNATEX will be taking place for the 51st time in ac-cordance with its usual daily schedule. So far, well over 200 brands have regis-tered from Saturday to Monday in Hofheim-Wallau, near Frankfurt am Main, getting back towards pre-COVID levels. Its motto, ‘One Goal, Endless Styles’, refers not only to the diversity and solidarity in the INNATEX community but also to the fact that Green Fashion is a fundamental business area for the future.

International trade fair for Green Fashion focuses on new formats and strategic partnerships:

From 21 to 23 January 2023, INNATEX will be taking place for the 51st time in ac-cordance with its usual daily schedule. So far, well over 200 brands have regis-tered from Saturday to Monday in Hofheim-Wallau, near Frankfurt am Main, getting back towards pre-COVID levels. Its motto, ‘One Goal, Endless Styles’, refers not only to the diversity and solidarity in the INNATEX community but also to the fact that Green Fashion is a fundamental business area for the future.

Sustainability: a business model fit for the future
“We are seeking to promote constant new development in a sustainable textile industry through new formats and cooperation agreements,” says Alexander Hitzel, INNATEX Project Manager. “We are currently working with the Retail Federation (HDE) on addressing conventional retailers. In addition, we are planning creative and entirely novel concepts for the presentation of labels, as well as a business panel designed to deliver insights and hard facts for the trade. Sustainability projects are only truly sustainable if they are also selfsupporting business models.

From live presentations and strategic communication to fundraising campaigns
But, he says, the demand for established natural fibres and specifically designed production and certification options is also rising. The International Association of the Natural Textile Industry (IVN) will again be on site to offer its expertise and provide information on the implementation of the new German Supply Chain Act. The DesignDiscoveries support program, which will be on display in a freshly designed Special Area, offers selected newcomer labels a platform for their creative ideas. Applications are still open until 15 December.

“At INNATEX, retailers can seek out trends and discover new ideas and products, directly compare an unbeatable range of collections and articles from different suppliers, and get down to networking – those are the benefits of this ordering fair,” says Hitzel.

INNATEX is collaborating for the first time with the organisation Europe Cares, which provides humanitarian assistance for ‘people on the move’. Surplus goods that exhibitors can donate to the campaign will be used for the benefit of refugees at Europe’s borders.

Source:

INNATEX

Photo: Bcomp
22.11.2022

Made in Switzerland: Is Flax the New Carbon?

  • Bcomp wins BMW Group Supplier Innovation Award in the category “Newcomer of the Year”

The sixth BMW Group Supplier Innovation Awards were presented at the BMW Welt in Munich on 17 November 2022. The coveted award was presented in a total of six categories: powertrain & e-mobility, sustainability, digitalisation, customer experience, newcomer of the year and exceptional team performance.

Bcomp won the BMW Group Supplier Innovation Award in the Newcomer of the Year category. Following a successful collaboration with BMW M Motorsport for the new BMW M4 GT4 that extensively uses Bcomp’s powerRibs™ and ampliTex™ natural fibre solutions and BMW iVentures recently taking a stake in Bcomp as lead investor in the Series B round, this award is another major step and recognition on the path to decarbonizing mobility.

  • Bcomp wins BMW Group Supplier Innovation Award in the category “Newcomer of the Year”

The sixth BMW Group Supplier Innovation Awards were presented at the BMW Welt in Munich on 17 November 2022. The coveted award was presented in a total of six categories: powertrain & e-mobility, sustainability, digitalisation, customer experience, newcomer of the year and exceptional team performance.

Bcomp won the BMW Group Supplier Innovation Award in the Newcomer of the Year category. Following a successful collaboration with BMW M Motorsport for the new BMW M4 GT4 that extensively uses Bcomp’s powerRibs™ and ampliTex™ natural fibre solutions and BMW iVentures recently taking a stake in Bcomp as lead investor in the Series B round, this award is another major step and recognition on the path to decarbonizing mobility.

“Innovations are key to the success of our transformation towards electromobility, digitalisation and sustainability. Our award ceremony recognises innovation and cooperative partnership with our suppliers – especially in challenging times,” said Joachim Post, member of the Board of Management of BMW AG responsible for Purchasing and Supplier Network at the ceremony held at BMW Welt in Munich.

BMW first started to work with Bcomp’s materials in 2019 when they used high-performance natural fibre composites in the BMW iFE.20 Formula E car. From this flax fibre reinforced cooling shaft, the collaboration evolved and soon after, the proprietary ampliTex™ and powerRibs™ natural fibre solutions were found successfully substituting selected carbon fibre components in DTM touring cars from BMW M Motorsport. By trickling down and expanding into other vehicle programs, such developments highlight the vital role that BMW M Motorsports plays as a technology lab for the entire BMW Group. This continues in the form of the latest collaboration with Bcomp to include a higher proportion of renewable raw materials in the successor of the BMW M4 GT4.

With the launch of the new BMW M4 GT4, it will be the serial GT car with the highest proportion of natural fibre components. Bcomp’s ampliTex™ and powerRibs™ flax fibre solutions can be found throughout the interior on the dashboard and centre console, as well as on bodywork components such as the hood, front splitter, doors, trunk, and rear wing. Aside from the roof, there are almost no carbon fibre reinforced plastic (CFRP) components that were not replaced by the renewable high-performance flax materials. “Product sustainability is increasing in importance in the world of motorsport too,” says Franciscus van Meel, Chairman of the Board of Management at BMW M GmbH.

Bcomp is a leading solutions provider for natural fibre reinforcements in high performance applications from race to space.

The company started as a garage project in 2011 with a mission to create lightweight yet high performance skis. The bCores™ were launched and successfully adopted by some of the biggest names in freeride skiing. The founders, material science PhDs from École Polytechnique Fédérale de Lausanne (EPFL), used flax fibres to reinforce the balsa cores and improve shear stiffness. Impressed by the excellent mechanical properties of flax fibres, the development to create sustainable lightweighting solutions for the wider mobility markets started.

Flax is an indigenous plant that grows naturally in Europe and has been part of the agricultural history for centuries. It requires very little water and nutrients to grow successfully. In addition, it acts as a rotational crop, thus enhancing harvests on existing farmland. Neither cultivation nor processing of the flax plants requires any chemicals that could contaminate ground water and harvesting is a completely mechanical process. After harvesting the entire flax plant can be used for feed, to make oil and its fibres are especially used for home textiles and clothing. The long fibre that comes from the flax plant possesses very good mechanical properties and outstanding damping properties in relation to its density, making it especially suited as a natural fibre reinforcement for all kinds of polymers.

The harvesting and processing of flax takes place locally in the rural areas it was grown in. Using European flax sourced through a well-established and transparent supply chain it allows to support the economic and social structure in rural areas thanks to the large and skilled workforce required to sustain the flax production. When it comes to the production of technical products like the powerRibs™ reinforcement grid, Bcomp is investing in local production capacities close to its headquarters in the city of Fribourg, Switzerland, thus creating new jobs and maintaining technical know-how in the area. The production is built to be as efficient as possible and with minimal environmental impact and waste.

Further strengthening the local economy, Bcomp aims to hire local companies for missions and with the headquarters being located in Fribourg’s “Blue Factory” district, Bcomp can both benefit from and contribute to the development of this sustainable and diverse quarter.

Source:

Bcomp; BMW Group

photo: pexels
26.07.2022

Composites Germany – Results of the 19th Market Survey

  • Current crises are dampening mood in composites industry
  • Pessimistic outlook
  • Subdued investment climate
  • Varying expectations for application industries
  • GRP is still a growth driver
  • Composites Index continues to decline

This is the 19th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK, Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.

As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future developments in the market.

  • Current crises are dampening mood in composites industry
  • Pessimistic outlook
  • Subdued investment climate
  • Varying expectations for application industries
  • GRP is still a growth driver
  • Composites Index continues to decline

This is the 19th time that Composites Germany has identified the latest performance indicators for the fibre-reinforced plastics market. The survey covered all the member companies of the three major umbrella organisations of Composites Germany: AVK, Leichtbau Baden-Württemberg and the VDMA Working Group on Hybrid Lightweight Construction Technologies.

As before, to ensure a smooth comparison with the previous surveys, the questions in this half-yearly survey have been left unchanged. Once again, the data obtained in the survey is largely qualitative and relates to current and future developments in the market.

Current crises are dampening mood in composites industry
Both the economy in general and industry in particular are struggling with numerous challenges at the moment. The Covid-19 pandemic has now had a negative impact for over two years and is still affecting a range of segments of the composites industry. One area that has been hit especially hard by the resulting losses is the mobility sector. Another major strain has been a sharp rise in energy costs recently. Above all, we can expect price increases in fuel and gas to become a central issue over the next few months. In addition, there are still problems along international supply chains, coupled with steep increases in raw material prices, partly due to bottlenecks in the supply. The war in Ukraine has put an additional strain on many business sectors, affecting their supply chains, in particular.

In the current survey, both these and other effects have had a major negative impact on the mood in the composites industry.

The assessment index for the current general economic situation is showing a clear decline.

Compared to the last survey, the assessment of the respondents’ own business situations has dropped significantly and for the first time in eighteen months. However, this decline has been far less severe than during the onset of the Covid-19 pandemic.

Pessimistic outlook
Furthermore, there has been a substantial decline in expectations for the future market development. The key figures for the general economic situation have been declining sharply and have reached an all-time low since the beginning of the survey. The respondents are also less optimistic about future expectations for their own companies.

However, respondents are less extreme when assessing the business situations of their own companies. Despite negative spikes, this curve is far less steep, showing that respondents are expecting less dramatic effects on their own companies than on the industry as a whole.

Subdued investment situation
Although, as expected, the investment climate has also become subdued, it should be noted that, in all, expectations are still relatively high. 70% of all respondents believe that machine investments are possible, or they are planning for it. This figure is somewhat lower than in the previous market survey, but it shows a far less dramatic development than the other factors mentioned above .

Varied expectations for application industries
We already mentioned the high level of heterogeneity of applications in the composite sector. In the survey, respondents were asked to provide assessments of market developments in various core sectors.

Their expectations clearly differ substantially from one another.

The proportion of pessimistic expectations has generally been rising for all application industries. While these expectations are almost entirely within a single-digit range, there has been a clear rise in the proportion of those expecting a deterioration of the market in the various application industries. Similar to the last surveys, major drops are expected above all for the automotive, aviation and mechanical engineering sectors. For the first time, however, we can now also see rather negative expectations on the infrastructure and building sector. Yet this is a segment which often reacts quite slowly to temporary economic fluctuations and has so far shown itself to be relatively resilient towards the above-mentioned crises. It remains to be seen whether such forebodings will come true, or whether the construction industry will continue to hold its own in the face of the current negative forces.

Growth drivers remain stable
Geographically, the survey shows that the most important growth stimuli for the composites segment are expected to come from Germany, Europe and Asia.

Where materials are concerned, we are seeing a continuation of the ongoing paradigm shift. Whereas, in the first 13 surveys, respondents always mentioned CRP as the material with the most important growth drivers in its environment, the most important stimuli are now being expected to come consistently either from GRP or from all materials.

Composites Index continues to decline
The industry is currently going through an extremely tense and difficult period, characterised by rising costs, supply chain issues, lack of availability of certain semifinished products and raw materials, increasing political instability and very pessimistic expectations for the future. All the relevant indicators of the current composites survey are pointing downwards at the moment. After some slight recovery over the last 18 months, the Composite Index has therefore clearly been weakening this time and has been dropping to new low points, especially concerning future expectations.

Industry in general, but particularly also Germany’s composite industry, has always shown itself to be very resilient towards crises and has often cushioned negative developments quickly. The total production volume for composites in Europe last year already reached its pre-crisis level of 2019. Germany continues to be the most important manufacturing country in Europe, with a market share of nearly 20%. Hopefully, the slowdown in the coming months will be less severe than expected and the composites industry will remain on an upward trajectory. We will continue to be optimistic, as composites are highly diverse and therefore a key material of the future.

The next Composites Market Survey will be published in January 2023.

Source:

Composites Germany

Photo: Pixabay
19.07.2022

The future of fashion: Revolution between fast and slow fashion

The fashion industry is massively influenced by the change in social values. Which trends can be observed and in which direction is the fashion future developing - an excerpt from the Retail Report 20231 by Theresa Schleicher.

The fashion industry is massively influenced by the change in social values. Which trends can be observed and in which direction is the fashion future developing - an excerpt from the Retail Report 20231 by Theresa Schleicher.

The fashion industry has been slowed down by the global health pandemic and further affected by the measures taken in the wake of the Ukraine war: Fragile supply chains, increased transportation and energy costs, and rising prices are having an impact on the globalized fashion industry. Those who were moving the fastest are being hit the hardest. Fast fashion based on the principle of "faster and faster, cheaper and cheaper, more and more" - which has been in the fast lane for years - is now experiencing an unprecedented crash. Even without these momentous events, the fashion system would have reached its limits. What could have developed evolutionarily is now being revolutionized. Now and in the future, it will be particularly difficult for brands and retail companies that do not have a sharp profile or that have lost many customers in the attempt to offer mass-produced goods at prices that are still lower than those of their competitors.

New value paradigm in society - also for fashion
While fashion retailers and fashion brands are focusing on expanding online and have been putting their foot on the gas pedal since the corona pandemic at the latest, a parallel change in values is taking place in society. Many behaviors that have been practiced, tested and lived for months will continue to shape our consumer behavior and lifestyles in the future. The uncertainty in society as well as a shrinking economy and rising consumer prices as a result of the Ukraine war will further contribute to this shift in values.

The old paradigm was "primarily shaped by pragmatic factors such as price, quantity, safety and convenience, so consumer behavior was predominantly based on relatively simple cost-benefit calculations." The new value paradigm, on the other hand, is more strongly influenced by "soft factors". For example, the quality of a product is defined more holistically. In addition to price, "ecological, [...] ethical and social aspects are also taken into account. It is about positive or negative experiences that one has had with producers and about the visions that they pursue with their companies". This new value paradigm is forcing the large chain stores in particular to rethink. They have to develop their business models further in the direction of sustainability, transparency and responsibility - and show attitude. The influence of the neo-ecology megatrend combined with the push towards the sense economy is reshuffling the cards in the fashion industry.

The most important driver for the change in consumer behavior is climate protection, which is also becoming personally more important to more and more people because they are feeling the effects of climate change themselves in their everyday lives. The transition to a sustainable, bio-based and circular economy is accompanied by fundamental changes in the technical, economic and social environment.

Circular fashion as an opportunity for fast fashion
The development of the fashion industry - especially the fast fashion industry - towards a more circular economy is not a short-term trend, but one of the most long-term and at the same time forward-looking trends in retailing of all.

Even before the pandemic, a growing proportion of consumers placed value on sustainably produced clothing instead of constantly shopping the latest trends. A reset is needed, but the fashion industry faces a difficult question: How can it respond to the demand for new trends without neglecting its responsibility for the environment?

The solution for reducing emissions and conserving raw materials and resources seems obvious: produce less. On average, 2,700 liters of water are needed to produce a T-shirt - that much drinking water would last a person for two and a half years. In Europe, each person buys an average of 26 kilograms of textiles per year - and disposes eleven kilograms. Of this, almost 90 percent is incinerated or ends up in landfills. Overproduction, precarious working conditions during production and the use of non-sustainable materials are the major problems of the fast fashion industry. It is time to slow down fast fashion.

Fashion recycling by Design & Recycling as a Service
A first step towards keeping fashion and textiles in the cycle for longer is to recycle materials properly. In the future, recycling must be considered as early as the design stage - not only for sustainably produced fashion, but also for fast fashion. The H&M Group, for example, developed the Circulator for this purpose: The digital evaluation tool guides the designer through materials, components and design strategies that are best suited for the product depending on its purpose, and evaluates them in terms of their environmental impact, durability and recyclability.

However, more and more young companies are specializing in offering recycling for textiles as a service. They work directly with fashion retailers or fashion brands to enable the best possible recycling, re-circulation or even upcycling. Until now, it has not been worthwhile for large textile companies to invest in their own recycling systems. But Recycling as a Service is a market of the future, led by innovative start-ups such as Resortecs that are tackling previous hurdles in our recycling system. In the future, more and more new service providers will pop up around returns and recycling and help fashion retailers to align their material cycles more sustainably.

Secondhand conquers the fast fashion market
Another way to extend the life of clothing is to pass it on to new users. We are witnessing the triumph of vintage, retro and more - chic secondhand stores and chains like Resales and Humana are popping up everywhere. The renaming of secondhand to pre-owned or pre-loved also illustrates the increased appreciation of worn clothing. The trend toward secondhand also pays off economically for companies: The number of platforms whose business model revolves around the resale of clothing is increasing, and secondhand fashion is arriving in the middle of society. The luxury segment and especially vintage fashion are stable in price because the availability of these unique pieces is limited. Fast fashion, on the other hand, is available in sufficient quantities and is particularly interesting for price-sensitive customers, as secondhand is considered one of the most sustainable forms of consumption - meaning that fashion can be shopped with a clear conscience - and is usually even offered at a lower price than new goods. The second-hand market will continue to professionalize and become more socially acceptable. As a result, the fast fashion industry will also be forced to produce higher quality clothing in order to become or remain part of the circular system.

Slow fashion gains momentum thanks to technology
The development and orientation of fast fashion towards circular processes is also changing sustainable fashion. In the future, fast fashion and slow fashion can learn from each other to fully exploit their potential: fast fashion will become more sustainable, while slow fashion will focus on faster availability and delivery and make the customer experience as pleasant as possible. Fast and slow fashion are no longer compelling opposites - because the sustainable fashion movement can also benefit from technological innovations that are being established above all by the fashion platforms, and lift slow fashion to a new level.

At the same time, Sustainable Luxury is a new form of luxury consumption - especially in the field of designer fashion, sustainability is becoming the all-important criterion. Sustainability as a means of distinction for true luxury and sustainability as a basic prerequisite for a functioning fashion industry are increasingly converging. This is where the transition between a slowdown of fast fashion and an acceleration of slow fashion takes place.

Trend Sustainable Luxury
Luxury is defined less and less by the object and its possession and is increasingly becoming an expression of one's own lifestyle and values. Consumers' understanding of premium and luxury has changed - not least driven by the neo-ecology megatrend. In the future, it will no longer be just about owning something as expensive and ostentatious as possible. What began as a rebellion against careless consumption of luxury brands that promise high-end products but accept unfair and environmentally damaging manufacturing conditions in the process has increasingly become accepted as a value attitude. Luxury products have no less a claim than to improve the world.

Sustainable and ethical products and services made from innovative materials that have the power to solve problems and make the world a better place. At the same time, this highly ethically and morally charged form of sustainability is turning into a means of distinction: For the materials are so new, the manufacturing processes still so experimental, that the products are unique and often only available in very small quantities or on order. And this exclusive sustainability naturally comes at a price. After all, a company that pursues a mission is not concerned with simply cutting costs - certainly not at the expense of others or the environment. Instead of leather and fur, luxury fashion is now made from oranges, pineapples, hemp, cacti: there are more and more new, innovative and sustainable materials from which unique garments and accessories can be made.

Predictive, Pre-Order & Made-to-Order
Artificial intelligence and Big Data analysis can help predict fashion demand. Fast fashion leaders like Shein are characterized by agile production which is supported by AI algorithms for trend prediction fed with data from TikTok and other social media services. This could sustainably reduce overproduction and unsaleable goods in the future. As critical as Shein's practices are, the automation of processes also offers immense opportunities for a more sustainable fashion industry, as production only starts when goods are in demand.

AI support in the design process can be used to produce more sustainable fashion - and make it available more quickly. In a future of an avatar economy and in the world of virtual influencers, it may even be possible to dispense with part of the production process: Fashion will remain virtual - and thus more resource-efficient. Digital fashion will become increasingly important as the metaverse is built.

5 Key Takeaways on the Future of Fashion

  1. The current crisis in the fashion industry is an opportunity to move more in the direction of circular fashion. Above all, the new value paradigm in society, understanding quality more holistically and consuming more mindfully, is providing a push towards fairer, more ecological and more social fashion. Fast fashion and sustainability are not mutually exclusive.
  2. There are already first approaches to keep fast fashion in the cycle longer or to return it to the cycle. One important development is to consider recycling or reuse as early as the design and manufacturing process - known as recycling by design. In addition, there is a growing number of start-ups specializing in the optimized recycling of textiles and cooperating with major fashion players.
  3. Above all, the booming online trade in used fashion, often communicated as the pre-loved or pre-owned category, is making secondhand respectable for the mainstream. Such fashion, with a story and an aura of uniqueness, is also a cost-effective but more sustainable alternative to fast fashion.
  4. But slow fashion is also changing, especially due to the dominance of new technologies. Slow fashion can also benefit from processes that are currently manifesting themselves in the online fashion market, such as fast delivery or pre-order services. Slow fashion thus becomes more convenient, better and faster available. It will be easier for sustainably oriented fashion enthusiasts to consume according to their values and attitudes.
  5. The trend toward sustainable luxury continues: Sustainability as a means of distinction for a new form of luxury enables alternative manufacturing processes and innovative materials in the luxury fashion market. These are being showcased by an avant-garde and, if they prove successful, adapted by fast fashion.

1 https://onlineshop.zukunftsinstitut.de/shop/retail-report-2023/

Source:

Retail Report 2023 | Theresa Schleicher, Janine Seitz | June 2022

Photo: Pixabay
12.04.2022

Disrupted supply chains: Only nearshoring and digital technologies will help in the long term

  • McKinsey survey: Globally, more than 90 percent of supply chain managers are investing in the resilience of their supply chains during the Corona crisis.
  • But more often than not, they are simply increasing inventories instead of focusing on long-term effective measures such as regionalization of suppliers.
  • Only the healthcare industry has consistently relied on nearshoring and regionalization of suppliers so far.

Supply chain managers worldwide are under pressure: More than 90 percent invested during the Corona crisis to make their supply chains more resilient to external disruptions. More often than planned, however, supply chain managers resorted to the ad hoc measure of simply increasing inventories. And less often than planned, they also relied on long-term effects by regionalizing their supply base.

  • McKinsey survey: Globally, more than 90 percent of supply chain managers are investing in the resilience of their supply chains during the Corona crisis.
  • But more often than not, they are simply increasing inventories instead of focusing on long-term effective measures such as regionalization of suppliers.
  • Only the healthcare industry has consistently relied on nearshoring and regionalization of suppliers so far.

Supply chain managers worldwide are under pressure: More than 90 percent invested during the Corona crisis to make their supply chains more resilient to external disruptions. More often than planned, however, supply chain managers resorted to the ad hoc measure of simply increasing inventories. And less often than planned, they also relied on long-term effects by regionalizing their supply base. These are the key findings of a comparative study for which management consultants McKinsey & Company surveyed more than 70 supply chain managers from leading companies worldwide - for the first time in 2020 and again this year. Further results: Digital technologies are used much more frequently today than at the beginning of the pandemic, for example real-time monitoring or analytics based on artificial intelligence (AI).

The survey also quantifies the striking shortage of IT specialists in the area of supply management: in 2021, only one percent of the companies surveyed had enough IT specialists. "In the wake of the digitalization push, the need for IT skills is becoming even more of a bottleneck than it already has been," reports Vera Trautwein, McKinsey expert for supply chain management and co-author of the study. "As a result, the scope for action is also decreasing dramatically." In 2020, ten percent of the supply chain managers surveyed still had access to sufficient experts with the relevant IT know-how in their departments. How did the supply chain managers act during the crisis? Almost all respondents (92 percent) have invested in the resilience of their supply chains, and 80 percent have also invested in digital supply chain technologies. But while 40 percent of the 2020 respondents in McKinsey's first "Supply Chain Pulse" had still planned nearshoring and expanding their supplier base, only 15 percent ultimately put this into action. Instead, significantly more managers than expected - 42 percent versus 27 percent - expanded their inventories.

The 2020/21 comparative study also shows that supply chain managers have acted very differently in the crisis, depending on the industry. Healthcare can be considered a pioneer in the regionalization of the supply chain: 60 percent of the respondents in the industry have actually concentrated procurement, production and sales in a region such as Europe or North America, which they have also announced. In 2020, 33 percent of companies in the automotive, aerospace and defense industries had also announced this. However, according to their own figures, only 22 percent actually did so. This was despite the fact that more than three quarters of supply chain managers had given this measure priority. The chemicals and raw materials sectors made the fewest changes to their supply chains.

After the crisis is before the crisis
Over the years, supply chains have evolved into a high-frequency sensitive organism. Consistently globalized, optimized to fluctuations in consumer demand and with as little inventory as possible to cut costs. "This strategy has left companies vulnerable," notes McKinsey partner Knut Alicke. "And during the crisis, measures were taken that were more effective in the short term." As a result, supply chains are not yet resilient enough to prevent future disruptions. "For companies, nearshoring of suppliers remains a key factor in increasing their crisis resilience in the medium to long term." In addition, however, he said, the expansion and use of digital technologies are the key factors for resilient supply chains.

The pressure to act is great: Massive supply chain disruptions occur on average every 3.7 years and disrupt supply chains for at least one month. This was the conclusion of another McKinsey study on supply chains entitled "Risk, resilience, and rebalancing in global value chains" back in 2020.

Source:

McKinsey & Company [Düsseldorf, Germany]

Foto: Lalit Kumar, Unsplash
29.03.2022

The man-made fibers industry at the turning point of time

"You don't tear down a house before the new one is ready for occupancy."

Textination talked to the Managing Director of the Industrievereinigung Chemiefaser e.V., Dr. Wilhelm Rauch, about his assessment of the turning point that the man-made fibers industry is currently facing. What are the risks and threats, and what needs to change in order to remain a competitive player on the global market.

"You don't tear down a house before the new one is ready for occupancy."

Textination talked to the Managing Director of the Industrievereinigung Chemiefaser e.V., Dr. Wilhelm Rauch, about his assessment of the turning point that the man-made fibers industry is currently facing. What are the risks and threats, and what needs to change in order to remain a competitive player on the global market.

US President Joe Biden has called his Russian counterpart Vladimir Putin a war criminal in connection with the invasion of Ukraine. The United Nations' highest court, the International Court of Justice in The Hague, has ordered Russia to immediately end its war against Ukraine. How do you personally assess Russia's behavior?
Dr. Rauch:
With family roots in the Rhineland, Central and East Germany, I grew up at a time when, as a result of the division of Europe, families were separated and people were ruthlessly shot in the middle of Germany who wanted to cross the inner-German demarcation line towards the West. Since 1989, the fall of the Iron Curtain has led us into a period that lasted more than 30 years and allowed us, at least in Europe, to experience an era of peaceful coexistence between the great power blocs, intensive trade relations and prosperous states.

It is more than shocking to see today how Russia is trying to turn back the wheel of history in Europe with a brutality that the youngest generation growing up in Europe has fortunately not had to experience so far, and it brings back the worst memories of the Cold War, which everyone hoped would never return. If today in Ukraine even facilities for the peaceful use of nuclear energy are fired upon, a dimension has been reached that one does not want to extrapolate any further. In addition to the unspeakable human suffering caused, which we can only begin to alleviate by accepting Ukrainian refugees, in the long term all trust in political promises is being gambled away, which, however, is essential both for peaceful coexistence and for economic cooperation. We are facing a reordering of the world in which supply relationships and dependencies with or on autocratic states must be evaluated much more sensitively for each individual case.

The economic consequences of the Russia-Ukraine conflict are becoming increasingly clear. The Association of German Chambers of Commerce and Industry (DIHK) is correcting its forecast for 2022, but does not yet see a recession. What are your expectations for the industry in the current fiscal year?
Dr. Rauch:
The man-made fibers industry has been severely affected by the SARS-CoV-2 pandemic in the last two years. Planned investments were first postponed and then finally abandoned. By the end of 2022, three man-made fibers producers will close their doors in Germany compared to 2019. The industry started the current year on a very hopeful note, although previous issues such as REACH and, above all, energy costs were already increasing in severity before the Russia-Ukraine war. The economic consequences of the war will have a negative impact both directly in the form of increased energy prices and indirectly through changes in international competitive conditions.

What do the war in Ukraine and the economic sanctions against Russia entail for the upstream supply chains of the manmade fiber industry?
Dr. Rauch:
The immediate upstream supply chains will not be affected much by this war at first. However, we must expect supply chains in other industries to be disrupted. If, for example, certain raw materials or products are no longer available, this can have a noticeable impact, starting with logistics (mobility) and extending to components in production technology facilities. An example of this is the availability of cable harnesses, which were previously produced in Ukraine and are indispensable in many electronic components for man-made fibers production.

What is the relevance of Ukraine and Russia as sales markets for IVC member companies?
Dr. Rauch:
If we take the last year before the outbreak of the SARS-CoV-2 pandemic as the reference year, exports to Ukraine and the Russian Federation account for around 1.6% of total exports of man-made fibers from Germany. On average, a loss of sales to these countries can be tolerated, although it should not be forgotten that in individual cases - depending on a company's product portfolio - the impact can be quite significant. Looking beyond the horizon, it is not only the direct exports of man-made fibers to the war region that are of significance, but also deliveries of products in which man-made fibers are processed. Here, there are now interrupted supply relationships that result in order losses for the man-made fibers industry.

Certain industries are particularly affected by the consequences - what does this mean for the man-made fibers sector as a supplier industry?
Dr. Rauch:
Wherever production is cut back along the downstream value chain in which man-made fibers were used, the effects will be noticeable with a temporal delay. This applies, for example, to deliveries to the automotive sector, where the production of new vehicles comes to a standstill due to a lack of components originating from Ukraine.

How are exploding energy prices and the gas embargo affecting man-made fibers producers in the DACH region?
Dr. Rauch:
Even before the Russia-Ukraine war, European energy costs were already at a level that hit our members hard. For example, European gas costs currently rose by ten times from approx. 12 EUR/MWh to approx. 120 EUR/MWh as a result of the war, while in the USA they "only" rose by two and a half times from approx. 8 EUR/MWh to approx. 18 EUR/MWh. The situation is similar for electricity prices in Germany in particular, which have also risen by a factor of 10 from an already high level. Further price increases in Europe cannot be ruled out, but are more likely. Against this background, moderate adjustments in man-made fibers prices are only a drop in the bucket. A market development with virtually exploding energy costs cannot be reliably depicted by any company, nor can it be priced in such a way as to cover costs.

As the industry association of the man-made fibers industry, what do you think of "Freeze for Peace" or a stop to all Russian gas and raw material imports?
Dr. Rauch:
In Germany in particular, we have deliberately made ourselves dependent on Russian gas, contrary to all international warnings, by defining it as necessary for the bridge technology of electricity generation that we will need after the shutdown of coal- and nuclear-based power plants, before the availability of a sufficient amount of so-called "green" energy is assured. Gas is also needed for heating purposes and as a raw material, so it takes on the function of an all-rounder.

A boycott-related import stop would not only have serious negative consequences for the man-made fibers sector, but for the entire German industry and the majority of private households. As I mentioned at the beginning, it is the order of the day to help alleviate human suffering by taking in Ukrainian refugees. But this is not the end of the crisis. It must be assumed that the war situation will not be resolved in the near future. However, in order to cope with a protracted crisis situation, our economic strength must be maintained in order to be able to cope with the challenges ahead. An import freeze would be counterproductive in this respect. Since, due to the latest developments, gas deliveries are now to be paid for in rubles, there is rather a risk that Russia, for its part, will stop gas deliveries. In their effect, the two scenarios do not differ. The only thing that is certain is the fact that the availability of Russian gas to Europe is no longer guaranteed. Ultimately, the Russian demand to switch payments to rubles, which is not only aimed at revaluing the ruble, makes it clear that Russia is not dependent on Europe as a buyer of its gas. This would mean that a "freeze for peace" would lead to nothing. In the Far East, there is already a potential buyer of Russian gas to obtain it cheaply and safely, and which is also a major competitor of the European chemical fiber industry: China.

Are agreements with the United Arab Emirates and Qatar a good substitute solution for gas and oil supplies from Russia?
Dr. Rauch:
It is not a question of evaluating a measure in the sense of good or bad, but of whether it appears suitable in this particular situation to reduce unilateral dependencies on an aggressor before sustainable solutions are available in sufficient quantity. In this respect, there should initially be no ideological barriers in the measures to be examined for feasibility. The agreements concluded with the United Arab Emirates and Qatar after certainly careful political scrutiny are individual decisions and represent only one piece in the mosaic among many.

Does the saying "First we had bad luck, then we were not lucky at all" apply to the current economic performance of the industry - or: how do you assess the influence of the Corona pandemic and the war situation in this respect?
Dr. Rauch:
Both the SARS-CoV-2 pandemic and the Russia-Ukraine war are events with a global character. While the first event affected all countries equally sooner or later, the impact of the Russia-Ukraine war must be assessed in a more differentiated manner. The consequences of the war primarily affect companies in Europe, and there in particular those countries which - as mentioned above - have placed themselves in unilateral dependencies like Germany. This does not apply to the man-made fibers industry in particular. Although there are many fellow sufferers in other industries, this does not improve the situation, of course.

What does the industry expect from the political leaders in Berlin and Brussels in the future?
Dr. Rauch:
The wish list can be fixed to a few core elements:
In the long term, we need a supply of energy and raw materials that is not based on the dependence of a few autocratic states. On the way there, against the backdrop of the Russia-Ukraine war, previous exit scenarios from coal and nuclear energy must be reconsidered without prejudice with regard to their timeline. Or to put it more concisely: You don't tear down a house before the new one is ready for occupancy.

But energies from renewable raw materials must also be offered at prices that allow global competitiveness. According to a study by DECHEMA and FutureCamp, the chemical industry has calculated a price of 4 ct/kWh (including all taxes and fees). We are miles away from this today.

The revision of REACH must not lead to further bureaucracy and requirements that tie up capacity in companies. What we need in Europe is not dotting the i on Maslow's hierarchy of needs, but to ensure that we do not slide down the levels step by step and that the i dot floats in the air without an "i".

European economic policy must focus on the international competitiveness of European industry. It is not sufficient to consider and regulate the European Union only from the point of view of the internal market. The planned carbon border mechanism is such an example. It is intended to impose customs duties on imports that carry a high CO2 burden. This may protect the domestic market, but it does nothing at all to help export-oriented European industry such as the man-made fibers sector on the international world market, because European production costs remain too high by global standards despite the carbon border taxes.

The European Commission must increasingly recognize the European industry and with it the man-made fibers industry as problem solvers. Man-made fibers are indispensable as products for the energy turnaround (rotor blades for wind turbines), lightweight construction in mobility (lightweight car bodies in composite systems), sustainable road construction (geotextiles to reinforce the road surface and increase its service life), reduction of steel-reinforced concrete and thus cement, sand and gravel (reinforcement with high-tensile man-made fibers) and medical products (medical masks, bandaging materials, stents).

In Europe, we again need more market economy and no small-scale regulations that are adapted again and again and proliferate into an impenetrable thicket.

With all the wishes to politicians mentioned above, let me finally mention the following with regard to the current situation: In 1961, after the Berlin Wall was built, Russian and American tanks faced each other at Checkpoint Charlie at a distance of less than 50 meters, ready to fire.

A year later, in October 1962, nuclear-equipped American and Russian naval units met head-on in the Cuban Missile Crisis. Both John F. Kennedy and Nikita S. Khrushchev - bitter rivals in the contest of political systems - were sensible enough at the time not to let the situation escalate.

At present, I wish our national, European and transatlantic politicians’ unconditional determination in the defense of our free democratic values, but I also appeal to all politicians worldwide to take to heart one of Albert Einstein's fundamental perceptions: "I don't know what weapons will be used in the Third World War. But I can tell you what they'll use in the Fourth - rocks!"

Source:

Textination

The Interview was conducted by Ines Chucholowius, CEO Textination GmbH

Nicolas Meletiou, Pixabay
01.03.2022

Textiles and the environment: the role of design in Europe’s circular economy

From the perspective of European consumption, textiles have on average the fourth highest negative life cycle impact on the environment and climate change, after food, housing and mobility. A shift to a circular textile production and consumption system with longer use, and more reuse and recycling could reduce those impacts along with reductions in overall consumption. One important measure is circular design of textiles to improve product durability, repairability and recyclability and to ensure the uptake of secondary raw materials in new products.

Key messages

From the perspective of European consumption, textiles have on average the fourth highest negative life cycle impact on the environment and climate change, after food, housing and mobility. A shift to a circular textile production and consumption system with longer use, and more reuse and recycling could reduce those impacts along with reductions in overall consumption. One important measure is circular design of textiles to improve product durability, repairability and recyclability and to ensure the uptake of secondary raw materials in new products.

Key messages

  • In 2019, the EU textile and clothing sector had a turnover of EUR162 billion, employing over 1.5 million people across 160,000 companies. As was the case in many sectors, between 2019 and 2020, the COVID-19 crisis decreased turnover by 9% for textiles as a whole and by 17% for clothing.
  • In 2020, textile consumption in Europe had on average the fourth highest impact on the environment and climate change from a global life cycle perspective. It was the consumption area with the third highest impact on water and land use, and the fifth highest in terms of raw material use and greenhouse gas emissions.
  • To reduce the environmental impacts of textiles, a shift towards circular business models, including circular design, is crucial. This will need technical, social and business model innovation, as well as behavioural change and policy support.
  • Circular design is an important enabler of the transition towards sustainable production and consumption of textiles through circular business models. The design phase plays a critical role in each of the four pathways to achieving a circular textile sector: longevity and durability; optimised resource use; collection and reuse; and recycling and material use.

Textiles are identified as a key value chain in the EU circular economy action plan and will be addressed in the forthcoming European Commission’s 2022 EU strategy for sustainable and circular textiles and EU sustainable products initiative. This briefing aims to improve our understanding of the environmental and climate impacts of textiles from a European perspective and to identify design principles and measures to increase circularity in textiles. It is underpinned by a report from the EEA’s European Topic Centre on Circular Economy and Resource Use available here.

1. Production, trade and consumption of textiles
Textiles is an important sector for the EU economy. In 2019, the EU textile and clothing sector had a turnover of EUR162 billion, employing over 1.5 million people in 160,000 companies. As was the case for many sectors, between 2019 and 2020, the COVID-19 health and economic crisis decreased turnover by 9% for textiles as a whole and by 17% for clothing (Euratex, 2021).

In 2020, 6.9 million tonnes of finished textile products were produced in the EU-27. EU production specialises in carpets, household textiles and other textiles (including non-woven textiles, technical and industrial textiles, ropes and fabrics). In addition to finished products, the EU produces intermediate products for textiles, such as fibres, yarns and fabrics (Köhler et al., 2021).

The textiles sector is labour intensive compared with others. Almost 13 million full-time equivalent workers were employed worldwide in the supply chain to produce the amount of clothing, textiles and footwear consumed in the EU-27 in 2020. This makes the textiles sector the third largest employer worldwide, after food and housing. Most production takes place in Asia, where low production costs come at the expense of workers’ health and safety.
 
Textiles are highly globalised, with Europe being a significant importer and exporter. In 2020, 8.7 million tonnes of finished textile products, with a value of EUR125 billion, were imported into the EU-27. Clothing accounts for 45% of imports in terms of volume, followed by household textiles, other textiles and footwear (Eurostat, 2021a). The EU imports mainly from China, Bangladesh and Turkey, and exports mainly to the United Kingdom, Switzerland and the United States (Euratex, 2020).

Consumption
European households consume large amounts of textile products. In 2019, as in 2018, Europeans spent on average EUR600 on clothing, EUR150 on footwear and EUR70 on household textiles (Köhler et al., 2021; Eurostat, 2021b).

The response to the COVID-19 pandemic, involving stay-at-home measures and the closure of companies and shops, decreased textile production and demand overall (Euratex, 2021). As a result, the consumption of clothing and footwear per person decreased in 2020, relative to 2019, while the consumption of household textiles slightly increased. Average textile consumption per person amounted to 6.0kg of clothing, 6.1kg of household textiles and 2.7kg of shoes in 2020 (see Figure 1).

Apart from this COVID-related drop in consumption in 2020, the estimated consumption of clothing and footwear stayed relatively constant over the last decade, with slight fluctuations between years (see Figure 2). Similarly, the consumption of household textiles was also relatively steady, with a slight increase over the decade.

When calculating the ‘estimated consumption’ based on production and trade data from 2020, and excluding industrial/technical textiles and carpets, total textile consumption is 15kg per person per year, consisting of, on average:

  • 6.0kg of clothing
  • 6.1kg of household textiles
  • 2.7kg footwear.

For 2020, this amounts to a total consumption of 6.6 million tonnes of textile products in Europe. Textile consumption estimates are uncertain, as they vary by study, often using different scopes and calculation methods.

2. Environmental and climate impacts of textiles
The production and consumption of textiles has significant impacts on the environment and climate change. Environmental impacts in the production phase result from the cultivation and production of natural fibres such as cotton, hemp and linen (e.g. use of land and water, fertilisers and pesticides) and from the production of synthetic fibres such as polyester and elastane (e.g. energy use, chemical feedstock) (ETC/WMGE, 2021b). Manufacturing textiles requires large amounts of energy and water and uses a variety of chemicals across various production processes. Distribution and retail are responsible for transport emissions and packaging waste.

During use and maintenance — washing, drying and ironing — electricity, water and detergents are used. Chemicals and microfibres are also emitted into the waste water. Meanwhile, textiles contribute to significant amounts of textile waste. At the end of their life, textiles often end up in general waste and are incinerated or landfilled. When textile waste is collected separately, textiles are sorted and reused, recycled or disposed of, depending on their quality and material composition. In 2017, it was estimated that less than 1% of all textiles worldwide are recycled into new products (Ellen MacArthur Foundation, 2017).

To illustrate the magnitude of the impacts of textile consumption on raw material use, water and land use and greenhouse gas emissions compared with other consumption categories, we have updated our calculations of the life cycle environmental and climate impacts in the EU. We used input-output modelling based on data from the Exiobase database and Eurostat. In line with the reduced textile consumption level in 2020 because of the COVID-19 pandemic, the environmental impacts decreased from 2019 to 2020.

Raw material use
Large amounts of raw materials are used for textile production. To produce all clothing, footwear and household textiles purchased by EU households in 2020, an estimated 175 million tonnes of primary raw materials were used, amounting to 391kg per person. Roughly 40% of this is attributable to clothes, 30% to household textiles and 30% to footwear. This ranks textiles as the fifth highest consumption category in Europe in terms of primary raw material use (see Figure 3).

The raw materials used include all types of materials used in producing natural and synthetic fibres, such as fossil fuels, chemicals and fertilisers. It also includes all building materials, minerals and metals used in the construction of production facilities. Transport and retail of the textile products are included as well. Only 20% of these primary raw materials are produced or extracted in Europe, with the remainder extracted outside Europe. This shows the global nature of the textiles value chain and the high dependency of European consumption on imports. This implies that 80% of environmental impacts generated by Europe’s textile consumption takes place outside Europe. For example, cotton farming, fibre production and garment construction mostly take place in Asia (ETC/WMGE, 2019).

Water use
Producing and handling textiles requires large quantities of water. Water use distinguishes between ‘blue’ water (surface water or groundwater consumed or evaporated during irrigation, industry processes or household use) and ‘green’ water (rain water stored in the soil, typically used to grow crops) (Hoekstra et al., 2012).

To produce all clothing, footwear and household textiles purchased by EU households in 2020, about 4,000 million m³ of blue water were required, amounting to 9m³ per person, ranking textiles’ water consumption in third place, after food and recreation and culture (see Figure 4).

Additionally, about 20,000 million m³ of green water was used, mainly for producing cotton, which amounts to 44m³ per person. Blue water is used fairly equally in producing clothing (40%), footwear (30%) and household and other textiles (30%). Green water is mainly consumed in producing clothing (almost 50%) and household textiles (30%), of which cotton production consumes the most.

Water consumption for textiles consumed in Europe mostly takes place outside Europe. It is estimated that producing 1kg of cotton requires about 10m³ of water, typically outside Europe (Chapagain et al., 2006).

Land use
Producing textiles, in particular natural textiles, requires large amounts of land. The land used in the supply chain of textiles purchased by European households in 2020 is estimated at 180,000 km², or 400m² per person. Only 8% of the land used is in Europe. Over 90% of the land use impact occurs outside Europe, mostly related to (cotton) fibre production in China and India (ETC/WMGE, 2019). Animal-based fibres, such as wool, also have a significant land use impact (Lehmann et al., 2018). This makes textiles the sector with the third highest impact on land use, after food and housing (see Figure 5). Of this, 43% is attributable to clothes, 35% to footwear (including leather shoes, which have a high land use impact because of the need for cattle pasture) and 23% to household and other textiles.

Greenhouse gas emissions
The production and consumption of textiles generate greenhouse gas emissions, in particular from resource extraction, production, washing and drying, and waste incineration. In 2020, producing textile products consumed in the EU generated greenhouse gas emissions of 121 million tonnes carbon dioxide equivalent (CO2e) in total, or 270kg CO2e per person. This makes textiles the household consumption domain responsible for the fifth largest impact on climate change, after housing, food, transport and mobility, and recreation and culture (see Figure 6). Of this, 50% is attributable to clothes, 30% to household and other textiles, and 20% to footwear. While greenhouse gas emissions have a global effect, almost 75% are released outside Europe, mainly in the important textile-producing regions in Asia (ETC/WMGE, 2019).

About 80% of the total climate change impact of textiles occurs in the production phase. A further 3% occurs in distribution and retail, 14% in the use phase (washing, drying and ironing), and 3% during end of life (collection, sorting, recycling, incineration and disposal) (ECOS, 2021; Östlund et al., 2020).

Textiles made from natural fibres, such as cotton, generally have the lowest climate impact. Those made from synthetic fibres (especially nylon and acrylic) generally have a higher climate impact because of their fossil fuel origin and the energy consumed during production (ETC/WMGE, 2021b; Beton et al., 2014).

3. Design as an enabler of circular business models for textiles
To reduce the environmental and climate change impacts of textiles, shifting towards circular business models is crucial to save on raw materials, energy, water and land use, emissions and waste (ETC/WMGE, 2019). Implementing and scaling circular business models requires technical, social and business model innovation; as well as enablers from policy, consumption and education (EEA, 2021).

Circular design is an important component of circular business models for textiles. It can ensure higher quality, longer lifetimes, better use of materials, and better options for reuse and recycling. While it is important to enable the recycling and reuse of materials, life-extending strategies, such as design for durability, ease of reuse, repair and remanufacturing, should be prioritised. Preventing the use of hazardous chemicals and limiting toxic emissions and release of microplastics at all life cycle stages should be incorporated into product design.

Designing for circularity is the most recent development in design for sustainability. Expanding a technical and product-centric focus to a focus on large-scale system-level changes (considering both production and consumption systems) shows that this latest development requires many more disciplines than traditional engineering design. Product design as a component of a circular business model depends on consumer behaviour and policy to realise its potential and enable implementation. Figure 7 shows the linkages between the circular business model, product design, consumer behaviour and policy. All are needed to slow down and close the loop, making it circular.

IT solutions for stable supply chains © pixabay
30.11.2021

IT solutions for stable supply chains

Global supply chains comprise complex networks, making them particularly vulnerable. The UK is a prime example of this, where logistics problems are currently resulting in empty supermarket shelves and closed gas stations. Fraunhofer experts provide IT solutions that counteract supply bottlenecks in international goods traffic and maintain robust supply chains.

Earthquakes in South America, floods in Germany or political unrest in Asia: all compromise supply chains. A research team at the Fraunhofer Institute for Industrial Mathematics ITWM is developing mathematical methods that can be used to calculate how to minimize risks to supply chains. “Mathematically speaking,” explains Dr. Heiner Ackermann, Deputy Head of Optimization – Operations Research, “these disruptive events create a multidimensional decision problem.”    

Global supply chains comprise complex networks, making them particularly vulnerable. The UK is a prime example of this, where logistics problems are currently resulting in empty supermarket shelves and closed gas stations. Fraunhofer experts provide IT solutions that counteract supply bottlenecks in international goods traffic and maintain robust supply chains.

Earthquakes in South America, floods in Germany or political unrest in Asia: all compromise supply chains. A research team at the Fraunhofer Institute for Industrial Mathematics ITWM is developing mathematical methods that can be used to calculate how to minimize risks to supply chains. “Mathematically speaking,” explains Dr. Heiner Ackermann, Deputy Head of Optimization – Operations Research, “these disruptive events create a multidimensional decision problem.”    

Cushioning risks without additional costs
Ackermann’s team of experts analyze the properties of supply chains using mathematical models. The failure scenarios simulated on the basis of these calculations show at which points there is a greater need for action. In the second step, the researchers focus on holistic optimization – for a more robust supply chain that can cushion risks without incurring major costs. The experts package all variables into a multicriteria optimization problem. In this way, they determine the best possible solution for the triad of resilience, cost and risk. Algorithms calculate the optimum balance and with it various options for raw materials, suppliers and warehousing. Even the use of alternative materials is considered. The top priority: as few assumptions as possible. “Our work has set the ball rolling – companies that previously relied on Excel spreadsheets and their gut feeling are now engaging in very fruitful discussions,” explains Ackermann, adding: “Whether you are dealing with supply chains or supply networks, mathematics is a universal and very effective tool.”

Early detection of potential supply shortages
The Fraunhofer Institute for Material Flow and Logistics IML also offers highly effective support for testing and optimizing supply chains with its Order-To-Delivery-NETwork (OTD-NET) simulator. Thanks to this tool, planning and material flow processes from order to delivery can be continuously assessed. “OTD-NET maps even highly complex supply chains in full and at all levels, including the planning and information flow processes. Using various parameters, it is possible to accurately model cooperation between supply chain partners on the computer,” specifies Marco Motta, Head of Supply Chain Engineering at Fraunhofer IML.
 
Combining digital twins of supply chains with simulations
The tool set examines networks particularly with regard to customer promises in terms of delivery reliability and quality, etc., costs, environmental considerations and, in the analysis of alternative scenarios, resilience. “In the simulation, I can easily play around with demand peaks, a slump in the respective market or scenarios in which production is disrupted,” explains the Fraunhofer IML expert. In this way, forecasts can be made about how a supply chain will react in a state of emergency. Logistics assistance systems that combine a digital twin of the supply chain with simulations show dispatchers which cargo ships have loaded which parts, where these are located and when the consignment will be available at the required location. Supply for the next 20–30 weeks can thus be depicted for global networks, enabling potential bottlenecks to be detected early on. Tracking is also a distinguishing feature of the solution for demand and capacity management. Not only is the number of parts affected displayed but planners can also directly see the impact of this on the whole of production.
 
Most recently, both the automotive and medical sectors have suffered from supply bottlenecks. Saskia Sardesai, Senior Scientist at Fraunhofer IML, is leading different research projects in which OTD-NET is being used to increase resilience in value creation networks for medical supplies. “Especially smaller and medium-sized companies were addressing this problem using existing spreadsheet analysis tools. However, this approach does not identify dynamics.” This is where OTD-NET comes into play: The simulation dynamically shows over a long period whether all parts will be at the right location at the right time. “If all parts are available except for those from my transatlantic supplier and there is no alternative supplier in Europe, I will quickly have a break in my chain lasting over a month,” outlines the specialist.

Increasing the European manufacturing sector’s resilience to future pandemics In the European research project “CO-VERSATILE”, overseen by Sardesai, participants are doing everything in their power to increase the European manufacturing sector’s resilience to future pandemics. The supply chain should be able to react quickly and effectively to a sudden spike in demand for strategic medical supplies. To that end, experts at Fraunhofer IML have developed a simulation model that takes into account future peaks and fluctuations in demand as well as supplier risks. Companies are immediately given an overview of which effects they will have to face. “We have created very simple models to facilitate rapid feedback and implementation for a variety of companies,” explains the project manager. Particular attention was paid to capacities, lead times, transportation frequency and possible supply restrictions. Users can see how individual factors interplay – an invaluable advantage compared to the long-standing Excel solution.

(c) Checkpoint Systems
28.09.2021

Checkpoint Systems: Retail Technology Solutions – Success needs a Team

Checkpoint Systems, a division of CCL Industries, is a global leader in retail solutions. The portfolio ranges from electronic article surveillance as well as theft and loss prevention to RFID hardware and software and labeling solutions. The aim is to provide retailers with accurate, real-time inventory, speed up the replenishment cycle, prevent out-of-stocks and reduce theft to improve product availability and the customer shopping experience.

Checkpoint Systems, a division of CCL Industries, is a global leader in retail solutions. The portfolio ranges from electronic article surveillance as well as theft and loss prevention to RFID hardware and software and labeling solutions. The aim is to provide retailers with accurate, real-time inventory, speed up the replenishment cycle, prevent out-of-stocks and reduce theft to improve product availability and the customer shopping experience.

Textination spoke with Miguel Garcia Manso, Business Unit Director Germany at Checkpoint Systems, where the 44-year-old industrial engineering graduate has been working since 2018. With many years of international retail experience, he knows the needs of the retail industry very well. Before that, Miguel Garcia Manso lived in Madrid for almost 15 years, where he worked for the Spanish food retailer DIA. There he also accompanied the introduction and roll-out of article surveillance projects.

 

If you had to present Checkpoint Systems and its portfolio to someone who is not a retail professional – what would you say?

We are the retail partner and our job is to help retailers make shopping as pleasant as possible for their customers. Put simply, our solutions ensure that the right product is in the right place at the right time when the end consumer wants to buy it, instead of standing in front of an empty shelf in the worst-case scenario. Our portfolio ranges from individual anti-theft products to solutions that cover the entire supply chain and provide the greatest possible transparency of inventory.

 

It's been a long journey from the 1960s, when a small team in the U.S. developed a method to prevent the theft of books from public libraries, to becoming the international leader in 21st century article surveillance, operating in 35 countries. What legacy is still important to you today, and how would you describe the spirit at Checkpoint Systems?
 
Both questions have the same answer: On the one hand, innovative strength and, on the other, consistent exchange with the retail industry. Both have been in the focus at Checkpoint Systems from the very beginning. We develop our products and systems in close exchange with the industry, actively seek dialogue, listen to what is needed in everyday life, etc. This is very important to us and is also regularly used as a selling point for Checkpoint Systems. We definitely want to continue this.

 

You offer hardware and software technologies for retail, which is a very complex market. How do the requirements of retailers from the fashion, outdoor and textile industries differ from those of other industries?

The reasons why retail companies contact us are similar across all industries. They all want to delight their customers, retain them in the long term, and generate more sales. The ways to achieve this may differ: From omni-channel strategies for the fashion sector, to article surveillance solutions for high-priced electrical or cosmetic products, and to RFID-based fresh food solutions for food retailers to reduce food waste.
The requirements of the industries differ, especially when it comes to labels. Depending on the size and price of the product as well as the desired technology, we recommend different labels – or develop them in close coordination with the customer. For the Polish fashion company LPP, for example, we have just developed a special dual RF and RFID tag that blends harmoniously into the store design.

 

Magic word RFID – the contactless and automated reading and storing of data based on electromagnetic waves is the centerpiece of your technologies. You even encourage your customers to develop their own RFID strategy. What do you mean by this and are you sure that all retail companies will be able to do this on their own?

We develop the strategy together with our customers, usually as part of a pilot project. Until a few years ago, the introduction of RFID technology was actually more complex and usually involved a project lasting several years. Today, however, we can quickly calculate for each retailer in the context of a small pilot project, how much more profitable they can be with RFID and what their return on investment is. We usually start with a store scan, followed by pilot testing in selected stores, including individual training and on-site support. And by the time it is implemented in all stores, the customers themselves are RFID experts and have an understanding of what they can do with the real-time data. 

 

What does the keyword "customized" mean for Checkpoint Systems? To what extent can you map the individual needs of each customer? Or can you make every retail company – whether chain or boutique – "happy"?

We give high priority to personalized solutions. This concerns, on the one hand, the product itself and, on the other, the size of the company. As you already indicate, large retail chains obviously have different needs than small boutiques. For O₂, Telefónica Germany’s core brand, for example, we have just specially adapted our AutoPeg tags for theft protection. Instead of the standard yellow, the tags for O₂ are white with blue lettering to match the store design.
This also shows the development in the area of article surveillance in general: When article surveillance was still in its infancy, antennas and labels were mainly functional. Nowadays, they blend harmoniously into the overall look of the store design. Retailers no longer have to choose between design and functionality.

 

How is innovation management practiced in your company and which developments that Checkpoint has worked on recently are you particularly proud of?

In recent months, we have worked intensively – together with the German Employers' Liability Insurance Association (Berufsgenossenschaft Handel und Warenlogistik) – on the testing and certification of our article surveillance systems and now we can proudly say: We are the first manufacturer in Germany whose EAS systems have been tested by the CSA Group, an internationally recognized and accredited provider of testing and certification services. The CSA Group has confirmed that our radio frequency-based EAS systems comply with all standards and guidelines applicable in Germany with regard to exposure to electromagnetic fields. No safety distances need to be maintained.
The background is as follows: Retailers in Germany are obliged to prepare a risk assessment if they use an EAS system. The CE declaration of conformity, which they receive from the manufacturer when purchasing an EAS system, is not sufficient for this purpose. By testing our systems, we have created the best conditions for our customers to make such an assessment. We have also provided the relevant documents to the Employer's Liability Insurance Association.

We are also proud of the fact that we have managed to increase the clearance widths of our NEO antennas for article surveillance from two meters to 2.70 meters. This gives retailers significantly more freedom in store design. In general, store design is also a good keyword at this point: With our free-standing antennas, the design of the NS40 or even the possibility of incorporating antennas into checkout systems, we have contributed a great deal to making article surveillance aesthetically pleasing and harmoniously integrated into the whole.

 

The Covid-19 period was a disaster, especially for the stationary retail. In recent months, companies have increasingly moved in the direction of e-commerce – whether via individual store solutions or marketplaces – in order to compensate for at least part of the decline in sales. What is your advice to retailers: Can only omni-channel businesses be successful today and in the future?

Yes, that is definitely our advice to retailers. Omni-channel solutions are not going to disappear, but will continue to become more common and will be indispensable in the near future. Retailers are well advised to adapt to this new situation – also regardless of Corona – and to invest in the expansion of functioning omni-channel solutions. Customers expect the product they want, to be available when they enter a store. And if not, that they can easily have it delivered to the same store or shipped to their home. This only works with very high inventory transparency, for example through our RFID solutions.

 

Keyword: economic efficiency. Creating the much-vaunted personalized perfect shopping experience for the customer costs money, doesn't it? Stock availability, reducing inventories through clearance sales, shelf management, logistics and returns processing – to what extent can you support retailers in increasing their profitability?

NOT creating the perfect shopping experience costs a lot more – dissatisfied customers who haven't found what they want won't come back. To keep up with customer demand, many retailers therefore stock far too much products. In our experience, this amounts to an average of 42,000 items. That costs. These retailers pay high costs for warehouse space, need a lot of time for inventory processes, and end up having to reduce products significantly in order to reduce inventories.
The key to greater profitability lies in inventory accuracy. With the help of RFID technology, we can increase this to up to 99 percent. This allows us to avoid under- or overstocking, reduce the amount of storage space required, and optimize processes, including inventory. RFID can read hundreds of tags simultaneously and is more accurate and faster than manual counting. Experience shows that retailers can increase their sales by an average of three percent with our RFID technology.

 

Even if the situation in retail has eased to some extent as a result of the vaccinations, the shopping situation in on-site stores – viewed optimistically – also requires special precautions, at least for the next few months. With "safer shopping," you offer a package of various components for this purpose. What does it cover?
 
SmartOccupancy is our simple solution for controlling the number of people in salesrooms in real time. The system counts the number of people entering and leaving using Visiplus 3D, an overhead people counting sensor. When the maximum capacity is almost reached, SmartOccupancy sends an alert to the staff. This allows the staff to respond to current occupancy counts in real time, contributing to a safer environment for employees and customers. Those responsible can use SmartOccupancy to implement official instructions on the maximum number of people safely and reliably; manual counting is no longer necessary. A visual capacity indicator clearly shows customers at the door whether they are allowed to enter the store or not.
The second solution is primarily of interest to the textile and clothing industry as well as the footwear market: Inventory Quarantine is a software solution for secure, automated returns (SaaS-based). It allows retailers to park returned goods in an automated quarantine queue for a few hours. After the pre-defined time has passed, Inventory Quarantine notifies employees via push message that the piece of clothing or shoe can be cleared back to the floor or re-tagged as available in the online store. This means that items are only released when they are deemed safe for resale – while ensuring that items are put back on sale promptly. The solution helps retailers keep track of returned goods and minimize the time when products are not available on sale.

 

"Ethical consumption has finally become an attitude and has arrived in the middle of society," trend researcher Peter Wippermann commented on the results of the Otto Group's latest trend study "Living More Consciously". What does sustainability mean to Checkpoint Systems as a company, how do you reflect this finding in your product portfolio and how do you support your customers in achieving sustainability goals?

Sustainability is definitely an important topic for us at Checkpoint Systems. We regularly review our products and processes to see how we can work even more resource-efficiently, reduce production waste and lower our CO2 emissions. This also includes, how we can further reduce the power consumption of our antennas. We only develop and sell RF antennas. This technology is not only safer in terms of exposure to electromagnetic fields, but also more environmentally friendly: RF antennas require 40 to 70 percent less energy than other technologies.

Source:

The Interview was conducted by Ines Chucholowius, Managing Partner, Textination GmbH.

Photo: Pixabay
15.06.2021

Cabinet passes Draft on German Supply Chain Act

Passed on March 3, 2021, it will become effective as of Jan. 1, 2023 - the Supply Chain Act for companies with more than 3,000 employees. The draft law on corporate due diligence in supply chains - The Supply Chain Act - decided by the German Cabinet is expected to be finalized by the German Bundestag before the summer break.

With the fire at a textile factory in Pakistan in 2013, which claimed more than 250 victims, the topic of supply chain management and sustainable procurement received a great deal of publicity and was placed on the political agenda at various levels: companies can relocate their production abroad - but not their responsibility.

Passed on March 3, 2021, it will become effective as of Jan. 1, 2023 - the Supply Chain Act for companies with more than 3,000 employees. The draft law on corporate due diligence in supply chains - The Supply Chain Act - decided by the German Cabinet is expected to be finalized by the German Bundestag before the summer break.

With the fire at a textile factory in Pakistan in 2013, which claimed more than 250 victims, the topic of supply chain management and sustainable procurement received a great deal of publicity and was placed on the political agenda at various levels: companies can relocate their production abroad - but not their responsibility.

In recent years, a number of measures have been taken worldwide to improve the situation in global value chains. In particular, this involves compliance with human rights, social issues and environmental protection. However, the results are sobering: According to the BMZ (Federal Ministry for Economic Cooperation and Development), 25 million people are currently in forced labor, and 75 million boys and girls worldwide are affected by exploitative child labor.

But where does responsibility begin, and where does it end? The recently passed draft law on corporate due diligence in supply chains is a compromise decision by the ministries involved for development, labor and economy.

Experts from the accredited certification organization GUT Certification Company for Management Systems in Berlin have compiled key statements and estimations:

Which human rights do the due diligence obligations relate to?

  • Integrity of life and health
  • Freedom from slavery and forced labor
  • Protection of children and freedom from child labor
  • Freedom of association and the right of collective bargaining
  • Protection against torture
  • Fair working conditions (occupational health and safety, breaks)
  • Environmental obligations to protect human health

Circle of affected companies located in Germany and deadlines:

  • From 2023: Companies with more than 3,000 employees (over 600 companies in Germany)
  • From 2024: Companies with more than 1,000 employees (2,900 companies)

Obligations in the value chain
In addition to the affected companies' own business operations, responsibility initially extends only to their direct suppliers and service providers. Within the framework of risk management, adverse effects on human rights and environmental due diligence obligations are to be identified and documented in corresponding risk reports.

As long as there are no concrete indications of human rights violations, the monitoring of indirect suppliers is not the responsibility of the companies involved.

The documents are to be checked by the Federal Office for Economic Affairs and Export Control (BAFA). In the event of violations of the law, companies will initially face sanctions in the form of fines, however, in the event of serious violations, they may also be excluded from the granting of public contracts.

Overall, the "Act on Corporate Due Diligence in Supply Chains" does not provide for a duty to succeed or a guarantee liability, but primarily requires the companies involved to take measures within the framework of an "obligation of efforts".

The law does not provide for civil liability for any human rights violations in the supply chain. However, in the event of violations of human and labor rights, foreign employees are to be given the opportunity to be represented by trade unions and before German courts.

What does a company need to do in its own business unit and with its direct supplier?
Companies must implement the following measures:

  • Pass declaration of principles on respect for human rights
  • Risk analysis: establish and implement procedures to identify adverse human rights impacts
  • Risk management (incl. corrective measures) to prevent potentially negative impacts on human rights
  • Set up complaints mechanism
  • Report transparently and publicly
  • In the event of a violation, corrective measures must be taken immediately in the company's own business area, and it is imperative that these measures lead to the termination of the violation. In addition, further preventive measures must be initiated
  • If the violation with the direct supplier cannot be terminated in the foreseeable future, a concrete plan for minimization and avoidance must be created. Appropriate measures must be taken for this purpose, starting with supplier development within a defined time frame and ending with the discontinuation of the business relationship.

What does a company have to do with the indirect supplier?
Here, the due diligence obligations only apply on an occasion-related basis. If the company becomes aware of a possible violation by an indirect supplier, it must immediately:

  • Carry out a risk analysis
  • Implement a concept for minimization and prevention
  • Establish appropriate preventive measures regarding the causer of the violation

Is that a breakthrough? Barely.
With the aim of improving the human rights situation along the supply chain of German companies and thus implementing the UN Guiding Principles on Business and Human Rights, the German government passed the National Action Plan on Business and Human Rights (NAP) back in 2016. This urged companies to review their business activities and relationships with regard to human rights risks and implement necessary measures - on a voluntary basis.

However, the German government's report was sobering. For example, the monitoring of the implementation status of the NAP's requirements carried out from 2018 to 2020 revealed, that less than 20% of the German companies surveyed have voluntarily fulfilled their human rights due diligence obligations to date.

Now, ethical obligations are becoming part of the compliance, at least for the big companies in Germany. The majority of the "giants" involved are already familiar with the obligation under the EU Conflict Minerals Regulation and/or the EU CSR Directive: Corporate responsibility in the supply chain is a mandatory part of non-financial reporting. However, the materiality view here is defined by size of loss and not the topicality of the problem in the supply chain.

What does the new law change? With the law passed, everything remains the same for now: Digging in deeper and developing one’s own supply chain is still not mandatory.

Status Quo
From experience in validating sustainability reports, GUTcert auditors see that many German companies of various sizes are already addressing sustainability concerns in the supply chain based on their own corporate sustainability and ethical obligations:
 
The introduction of a code of conduct for business partners is already part of everyday life in many companies. When contracts are listed for the first time and renewed, the direct suppliers and service providers must adopt certain obligations and carry them forward into their own value chain.

Documentation of the risk analysis and its results as required by law is also no longer a novelty. At the latest in the context of conventional economic concerns, it is no longer possible to imagine supply chains without risks. The pandemic had brought this topic even more into focus in the light of interrupted supply chains in many places. Many companies have already expanded the purely economic risks to include sustainability-related issues, i.e. environmental and social concerns, human rights clauses and anti-corruption rules.

What is often missing, however, is an effective monitoring of the respective performance of the business partners. Self-reporting is the common tool in demonstrating sustainability in the supply chain. On-site controls are linked with high costs and often with the lack of knowledge about the possible means of a sustainability management. Some risks therefore often remain "blind spots".

What to do?
A matrix of one's own corporate sustainability risks of the value chain related to countries, industries and products is a first step in the right direction. With or without the law: The important thing is to take a serious look at your own supply chain and set the boundaries, so that existing risks of violation can actually be addressed - step by step. This way, any company can work out the key risks and opportunities with manageable effort. Help is provided by some internationally recognized sources that can serve as a basis for risk evaluation.
 
Targets and measures should be derived from the main risks and opportunities. These can range from the company's own controls and association work in its own industry to cooperation with international organizations, platforms and certifications. There are many options if one is looking for them.

Source:

GUT Certification Company for Management Systems

(c) Hochschule Niederrhein
06.04.2021

120 Years of Textile Training in Mönchengladbach

The Faculty of Textile and Clothing Technology at the Hochschule Niederrhein is celebrating a double anniversary this year. Firstly, the Hochschule Niederrhein will be 50 years old. Secondly, the Prussian Higher School for the Textile Industry was founded 120 years ago. This later became the Textile Engineering School, which was then integrated into the Faculty of Textile and Clothing Technology at the Hochschule Niederrhein in 1971. 

This year's Master Congress on April 23, 2021 embraces this double anniversary. The Congress is entitled: NOW AND THEN - MG CREATES CAREERS.

The Faculty of Textile and Clothing Technology at the Hochschule Niederrhein is celebrating a double anniversary this year. Firstly, the Hochschule Niederrhein will be 50 years old. Secondly, the Prussian Higher School for the Textile Industry was founded 120 years ago. This later became the Textile Engineering School, which was then integrated into the Faculty of Textile and Clothing Technology at the Hochschule Niederrhein in 1971. 

This year's Master Congress on April 23, 2021 embraces this double anniversary. The Congress is entitled: NOW AND THEN - MG CREATES CAREERS.

“Textile education in Mönchengladbach has a significant historical legacy of which we are very proud," comments Professor Dr Lutz Vossebein, Dean of the Faculty of Textile and Clothing Technology. With over 2,000 students and more than 30 professors, the Faculty is now one of the largest educational institutions in the field of textiles and clothing – even on a European scale.

“The Master Congress is aimed at students and partners of the Faculty as well as of the Research Institute for Textiles and Clothing from the fields of business, research and teaching as well as politics. As always, current topics will be presented at a high level by the aspiring engineers," says Prof. Dr. Maike Rabe, who initiated the Master Congress five years ago. This year's keynote speaker is Dr Uwe Mazura, Managing Director of the Confederation of the German Textile and Fashion Industry in Berlin. One of his topics will be corporate due diligence or, in short, the Supply Chain Law. “This is what the future and seasoned professionals in the industry have to get to grips with," explains the planning team with Oliver Heß, Dr Esther Rohleder and Iris Siebgens.

On April 15, 1901, the green light was given for textile education and training in Mönchengladbach. On this day the Higher Vocational School located on the Mönchengladbach / Rheydt city border welcomed its first students. This event was preceded by the growth of the textile industry in the 19th century, which was driven by the development of industrial spinning, weaving and finishing machines, and which led to an increase in the demand for skilled workers and managers, particularly in Mönchengladbach and the surrounding area.

The Mönchengladbach school was special as it united several departments under one roof. In addition to textile production, from 1912 there was a clothing department, which was expanded with time. Classes subsequently taught students about women's outerwear, lingerie, workwear and sportswear. The "Prussian Higher School for the Textile Industry", at that time unique in Germany, combined a wide range of subjects in the field of textile and clothing technology.
 
Due to the large number of students in the clothing departments, in 1932 the school was renamed "Higher Clothing Vocational School”. It was the first educational institution in Germany to be authorised to train clothing engineers. This upgraded the school to an engineering school, adding subjects such as costing, business organisation, performance and work planning.

The Faculty of Textile and Clothing Technology, which came into being when the Hochschule Niederrhein was founded in 1971, united the expertise of the former Textile Engineering School in Mönchengladbach – but also of the schools in Cologne, Bielefeld, Aachen, Wuppertal and naturally Krefeld. Krefeld, also a textile location with a long tradition in the region, was compensated for the departure of textile training to Mönchengladbach by the fact that the administration of the new University of Applied Sciences came to Krefeld.

One of the pioneers for the foundation of the University was Prof. Dr. Rolf Klinke. Fifty years ago, he was Chairman of the Planning Committee and then, as Vice-President of the young University of Applied Sciences and at the same time the first Dean of the Faculty of Textile and Clothing Technology, he was a central figure in the founding years. On the occasion of the Digital Master Congress 2021 he will be a guest of honour and will hold a talk about this time. The Master Congress is free of charge and will be held on Friday, April 23, 2021 from 9 a.m. to 4.15 p.m. For the full program and registration form visit: www.hs-niederrhein.de/ftb/#c129082

(c) PERFORMANCE DAYS functional fabric fair
29.12.2020

PERFORMANCE DAYS: Positive Feedback for Online Fair and sustain & innovate Conference

As a result of the Corona pandemic, the PERFORMANCE DAYS fair on December 9th - 10th and the accompanying sustain&innovate conference for sustainability on December 10 could only take place in digital form. Nevertheless: exhibitors, visitors and partners can look back on a successful event. The focus topic “Nothing to Waste – Closing the Loop“ relating to the issue of the textile circular economy in the course of the sustain&innovate conference also provided great discussion material while generating a positive response.

As a result of the Corona pandemic, the PERFORMANCE DAYS fair on December 9th - 10th and the accompanying sustain&innovate conference for sustainability on December 10 could only take place in digital form. Nevertheless: exhibitors, visitors and partners can look back on a successful event. The focus topic “Nothing to Waste – Closing the Loop“ relating to the issue of the textile circular economy in the course of the sustain&innovate conference also provided great discussion material while generating a positive response.

The PERFORMANCE DAYS team also expresses its satisfaction. Because despite the event being solely a digital event on the 9th and 10th of December 2020, an estimated 15,000 participants made extensive use of the comprehensive online offerings of the 191 digital exhibitors, among them drirelease/OPTIMER, Merryson, Stotz, HeiQ, Schoeller Textil, Long Advance, Dry-Tex, Utenos, Fidlock, Cifra, dekoGraphics and Jia Meir, during the week of the fair. The popular “Contact Supplier” function was supplemented with a new online tool that allows exhibitors to be contacted directly via chat, call or per video. A total of 3,250 fabric sample orders were placed with exhibitors. The variety on offer included fabric innovations for Autumn/Winter 2022/2023 within the top class PERFORMANCE FORUM and an extensive digital supporting program via live-stream with informative webinars, talks and rounds of discussions. Best of all: the resulting videos will be available on demand on the PERFORMANCE DAYS website free of charge.  
 
Finally standard: PERFORMANCE FORUM with sustainable materials
Innovative, sustainable and cutting-edge: the 240 fabrics plus accessory trends at this year’s PERFORMANCE FORUM impressed throughout with exciting environmentally conscious solutions. Natural fibers such as hemp, organic cotton, bamboo, wool or coconut shell remain in demand, while manufacturers are also increasingly refraining from the use of environmentally harmful chemicals, avoiding microplastics, advocating natural dyeing processes and either trying to return fabrics to the cycle, recycle plastic and other waste in order to produce fibres in such a way that they are biodegradable. This environmental awareness is also reflected in this year’s FOCUS TOPIC – so here the 24 best fabrics not only score in terms of sustainability, but also demonstrate that they are both functional and can be returned to the textile cycle, true to the motto “Nothing to Waste – Closing the Loop.   

In the Marketplace section, visitors have the opportunity to view more than 9,500 exhibitor products, including the fabric highlights of the individual categories of the PERFORMANCE FORUMS. In order to be able to digitally present the fabrics to visitors as realistically as possible in terms of feel, design and structure, the Forum has been equipped with innovative 3D technology, including innovative tools such as 3D images, video animations and U3M files for download.  

From fiber to fiber: successful sustain&innovate conference generates discussion  
Textile circular economy is considered part of the solution to the global waste problem, curbing the consumption of resources and reducing climate damaging greenhouse gases. But what exactly is the circular economy and how can it succeed? Most importantly, how far are fiber manufacturers in developing mono-component fabrics that can eventually be returned back into the textile cycle?    
The Focus Topic of this year’s sustainability conference, launched in cooperation with SPORTSFASHION by SAZ, offered a platform for discussion and strove to enlighten with evocative talks, discussion rounds and webinars. Christiane Dolva, Head of Sustainability at Fjällräven, got to the heart of the matter at the start of the expert talks on the second day of the fair, outlining how important emotional consistency is for the brand itself and ultimately also for the consumer – especially when it comes to textile recycling. Durability, good quality, in combination with timeless design are more important than ever today and in the future in terms of sustainable action. Added to this is the possibility of reviving products by means of a repair service. Equally exciting: the development of new technologies in terms of recycling. Erik Bang from the H&M Foundation provided a first glimpse of the new Greenmachine, which should make it possible to separate mixed fabrics such as cotton and polyester as early as 2021. Alternatively, old clothing is converted into new fibres thanks to companies such as WornAgain, Re:newcell, Spinnova or Infinited Fiber, which soon promises to be more than just a mere vision. For those who wish to gain insight into the supply chain of their purchased garment, the start-up know your stuff lets customers track the journey of the respective garment by simply scanning a QR code on the garment in a store or online.    
 
Free extensive retrospective
The next edition of PERFORMANCE DAYS is planned as a hybrid fair and will take place on May 19th and May 20th, 2021 in Munich as well as online. Until then, the PERFORMANCE DAYS platform will remain accessible, for instance with the Marketplace and further inspiring topics of (video) material stories to make online sourcing even easier. The talks from the first day of the fair and the conference will be accessible free of charge on the fair website.

The most importantt links:
Highlights of Expert Talks & Webinars
https://www.performancedays.com/digital-fair/expert-talk-webinar.html

Marketplace:
https://www.performancedays.com/marketplace.html

3D-Forum:
https://www.performancedays.com/digital-fair/forum-highlights/3d-forum.html

PERFORMANCE COLORS by Nora Kühner
https://www.performancedays.com/digital-fair/color-trends.html

More information:
Performance Days
Source:

PERFORMANCE DAYS functional fabric fair

Cotton (c) pixabay
10.11.2020

Fashion and textiles industry keen to go green despite COVID-19 pandemic

  • New research shows business leaders at top fashion, retail and textile businesses are putting sustaina-bility drive first, despite COVID-19 pandemic
  • The power of data in the effort to ‘go green’ is well recognized, but patchy performance suggests more access to better quality data needed to help turbocharge change
  • Despite Covid-19, fashion leaders are confident that fast, affordable and sustainable fashion is realistic, with crisis seen as opportunity to recharge sustainability efforts 

New research reveals the extent of the global fashion industry's commitment to sustainability, despite the COVID-19 pandemic, with sustainability ranked as the second most important strategic objective for businesses in the sector .

  • New research shows business leaders at top fashion, retail and textile businesses are putting sustaina-bility drive first, despite COVID-19 pandemic
  • The power of data in the effort to ‘go green’ is well recognized, but patchy performance suggests more access to better quality data needed to help turbocharge change
  • Despite Covid-19, fashion leaders are confident that fast, affordable and sustainable fashion is realistic, with crisis seen as opportunity to recharge sustainability efforts 

New research reveals the extent of the global fashion industry's commitment to sustainability, despite the COVID-19 pandemic, with sustainability ranked as the second most important strategic objective for businesses in the sector .

The new research, from the U.S. Cotton Trust Protocol and the Economist Intelligence Unit (EIU), is like Puma, H&M and Adidas. Explored in a new report, ‘Is Sustainability in Fashion?’ the research comes at a time when the industry finds itself at a crossroads: whether to continue to invest in sustainability, or row back in light of the pandemic.

Sustainability is business critical, say fashion, retail and textile leaders  
In defiance of the pandemic, the new data shows that for many of the world's biggest brands, sustaina-bility is now business critical. The majority of fashion, retail and textile leaders surveyed (60%), named implementing sustainability measures as a top two strategic objective for their business, second only to improving customers’ experience (ranked first by 64%). This contrasts starkly with the fewer than one in six (14%) that listed 'rewarding shareholders' as a top objective.

Leaders report they’re introducing sustainability measures throughout the supply chain, from sourcing sustainably produced raw materials (65%), introducing a circular economy approach to their business and cutting greenhouse gasses (51% apiece) and investing in new technologies like 3D printing and blockchain (41%).  Overall, the majority (73%) were optimistic that sustainable, fast and affordable fash-ion is achievable.

Data matters
A key finding of the research is that data matters for sustainability. When asked what measures they were implementing today to be more sustainable, collecting data from across the business and in the supply chain to measure performance was listed at the very top of business leaders’ list of priorities by 53%, second only to developing and implementing an environmental sustainability strategy with meas-urable targets, favoured by almost six in ten (58%).

And data is not important for the immediate term only –  three in ten (29%) said the availability of relia-ble data holds the key to greater sustainability over the next decade, while almost three-quarters of industry leaders (73%) stated their support for global benchmarks and thresholds as an effective means of measuring sustainability performance and driving progress in the industry.

But data collection is patchy
However, although brands clearly recognize the importance of data, the research’s findings on data collection indicates that top fashion brands, retailers and textile businesses may find sourcing good quality data a challenge.

While business leaders report relatively high rates of data collection on supplier sustainability practices based on a survey of 150 leading executives from top fashion, retail and textile business across Europe and the US and interviews with leading brands (65%) and worker rights and workplace health and safety in the supply chain (62%), a significant proportion (45%) of businesses do not track greenhouse gas emissions across production, manufacturing and distribution of the products they sell, while 41% don’t track the amount of water and energy being used to produce the raw materials they source.

Looking to the future, over a quarter (26%) of respondents saw a lack of available, easily-accessible data as hampering collaboration on sustainability across the industry. As some respondents in interview pointed out, while collecting data could be hard it is important.  

Commenting on the findings, Gary Adams, President of the U.S. Cotton Trust Protocol, said: "It is clear that brands are faced with a challenge on driving forward their sustainability efforts. At the U.S. Cotton Trust Protocol we know that accurate, reliable data supports businesses in this work - providing not only the evidence to show hard work and progress, but the insight to drive further improvements. We pro-vide one of the most robust data collection mechanisms available for an essential material – cotton – for unparalleled transparency.”  

Partnership offers path to further progress
An additional key finding is that fashion, retail and textile business clearly cannot drive change in isola-tion: collaboration is needed. According to one respondent, from Reformation, this is already happen-ing. “We’re energized to see collaboration and cooperation across the industry and believe that will only increase over time.”

However, when it comes to external support to help guide that progress, business leaders do not nec-essarily perceive further regulation as the answer.  The UN Sustainable Development Goals (SDGs) and government regulation were each given equal weight in driving sustainability change, both cited by a quarter of respondents (24% apiece). Regulatory requirements were also ranked by only a third (33%) of the business leaders surveyed as being within the top three factors that will drive sustainability pro-gress over the next decade.  

Jonathan Birdwell, Regional Head of Public Policy and Thought Leadership, The Economist Intelligence Unit: “It’s clear from the survey results and our interviews with business leaders that the industry is committed to driving progress on its sustainability performance. We were particularly struck by the fact that sustainability is largely considered as pre-competitive – behind the scenes brands are sharing re-sources and lessons learned.”

The impact of Covid-19  
This determination on sustainability flies in the face of COVID-19 uncertainty, although when asked their view on the pandemic, just over half (54%) of respondents said they thought it would make sustainabil-ity less of a priority within the industry.

The U.S. Cotton Trust Protocol is a new initiative that sets a new standard in sustainably grown cotton. By working closely with growers, the U.S. Trust Protocol provides clear, consistent data on six key sus-tainability metrics, including GHG emissions, water use, soil carbon, soil loss, independently audited through Control Union Certification. For the first time, brands can access annualized farm level data and trace their cotton from field to 'laydown'.

Research based on quantitative survey of 150 executives in the fashion, retail and textile industry based in Europe and the United States undertaken by the Economist Intelligence Unit between 9th July and 28th July 2020. The survey was complemented by qualitative insight from interviews with ten professionals in the fashion and sustainability space.

PERFORMANCE DAYS Nothing to Waste - Closing the Loop (c) PERFORMANCE DAYS
20.10.2020

PERFORMANCE DAYS Nothing to Waste - Closing the Loop

  • Finite resources and endless mountains of rubbish set the tone of the upcoming 25th edition of PERFORMANCE DAYS. Closing the loop means nothing is wasted, not even time, as recycled clothing gets recycled again and again.

In keeping with this topic, the trade fair organizers are planning expert discussion panels to help present the facts as well as visions of the future. Expect the corresponding displays of sustainable materials, chosen by the PERFORMANCE FORUM Jury. Look for materials such as fibers from recycled PET bottles, recyclable mono-component materials or blends, and shirts that decompose to biomass in a "Cradle-to-Cradle" approach. "Nothing to Waste - Closing the Loop" is open to the public at the Messe München fairgrounds and as a Digital Fair online starting on December 9-10, 2020.

  • Finite resources and endless mountains of rubbish set the tone of the upcoming 25th edition of PERFORMANCE DAYS. Closing the loop means nothing is wasted, not even time, as recycled clothing gets recycled again and again.

In keeping with this topic, the trade fair organizers are planning expert discussion panels to help present the facts as well as visions of the future. Expect the corresponding displays of sustainable materials, chosen by the PERFORMANCE FORUM Jury. Look for materials such as fibers from recycled PET bottles, recyclable mono-component materials or blends, and shirts that decompose to biomass in a "Cradle-to-Cradle" approach. "Nothing to Waste - Closing the Loop" is open to the public at the Messe München fairgrounds and as a Digital Fair online starting on December 9-10, 2020.

The PERFORMANCE DAYS trade fair has chosen a new Focus Topic that concerns not only our own industry. The textile industry has long been achieving more efficient production by recycling its own waste products and using recycled materials from outside the industry, for example, PET-bottles. Nevertheless, textiles exist alongside glass, paper, metal, and plastics as a separate branch of waste management. Despite ambitious efforts at recycling by the waste and textile industries, the efficient use of textile waste as a resource remains a challenge. Compounding this challenge are the difficulties caused by a global world: production, consumers, and disposal sites are miles apart, shared expert knowledge about the other industries is lacking, and international standards and political support are nearly non-existent.

Final destination: the waste bin
Information from the Federal Office for the Environment shows that 0.8% of the oil produced is used in the textile industry for the production of new textiles. But the costly processing chain of this finite resource ends all too quickly in waste. A Greenpeace survey reveals outdated fashions or clothing of worn quality is thrown away within three years, only to land in the trash dumpsters. The European Environmental Agency estimates that 5.8 million tons of used textiles are discarded every year and either incinerated, used for landfill, or taken to mechanical-biological sewage treatment plants. Even if used clothing is collected by state or private companies, in many cases it cannot be sold (as second hand), donated, or recycled (into rags or insulating material). In the best case scenario, it is incinerated and converted to thermal energy.

Recycling and circular design
From an economic and environmental perspective, the term recycling refers to waste-free products, waste avoidance, and waste recovery and disposal. In our industry as it stands, recycling at the end of the product life cycle usually means converting the product into some other product, i.e., not clothing. This is the "Open-Loop" process. Accordingly, textiles are eventually incinerated, but the amount of energy recovered can vary greatly depending on how efficiently the waste incineration plant works. Such devaluing of the product to a product with less value than the original product is known as Downcycling. However, Downcycling is not the only solution: the "Closed-Loop" approach has the goal of making new clothes out of old ones through recycling. The closed loop for renewable natural resources, for example, can mean that natural fibers used in textiles will end up becoming soil, which is the nutrient for new natural fibers, i.e., a cradle-to-cradle approach. Synthetic garments similarly require extracting the man-made fibers and reprocessing them to produce another garment.

Planning for the end in advance
Rather than thinking about recycling opportunities at the end of the product life cycle, brands can already begin developing closed loop options while in the design phase. Among other things, designing out the waste can reduce the environmental impact of the products. To extend the useful life, consider leasing the materials and/or adding labels with instructions for disposal, repair, or repurposing. And, what about the idea of preparing 100% used textiles that can be reintroduced into the supply chain as 100% new textiles? Separating the different types of fiber used in blends is complex, cost-intensive, and further complicated when labels are non-existent (or no longer existing) or it is simply not (yet) technically possible. More and more clothing makers and suppliers are trying to avoid mixing fibers and are switching to "mono-materials" or "mono-components." Shirts are easy to make in this way, but if you add buttons, zippers, etc., the issue becomes more complex.

Nothing to waste - not even time
If you are like many end consumers, brand managers, and producers and want to make use of valuable resources in a more sustainable manner, register now on the trade fair website under "Visitor Login." There you can access a free trade fair ticket for December 9-10, 2020. You can also learn about the complimentary and soon to be expanded offers at the Digital Fair. Don’t forget to sign-up for the free Newsletter mailings. 

•     09.-10. December 2020      DIGITAL FAIR  Trends Winter 2022/23 

 

UPDATE
CoVid-19 continues to keep the world on edge. Many PERFORMANCE DAYS visitors, as well as exhibitors, have already announced that travelling to Munich in December would be simply impossible for them. Due to the increasing number of infections, further international travel bans and company-internal travel restrictions are now threatening. As a result, the December 2020 edition of PERFORMANCE DAYS will unfortunately not take place at the Messe München, but as Digital Fair! On the planned dates of December 09-10, both approved and advanced new tools will go online and provide further proof of PERFORMANCE DAYS’ expansion of its pioneering role in creating a digital textile trade fair experience.

 

Cost-effective Ways to minimize Risks in the Supply Chain Photo: Pixabay
28.07.2020

Fraunhofer ITWM: Cost-effective Ways to minimize Risks in the Supply Chain

  • Algorithms for optimized supply chains

The coronavirus pandemic has hit the economy hard. What lessons can be learned from this experience? And what’s the best way for companies to protect themselves against this kind of crisis in the future? The answer will certainly involve a combination of different approaches – but new mathematical methods developed by the Fraunhofer Institute for Industrial Mathematics ITWM look likely to be a very promising piece of the puzzle. These methods aim to calculate how the risks posed by supply shortages can be reduced significantly at very little extra cost.

  • Algorithms for optimized supply chains

The coronavirus pandemic has hit the economy hard. What lessons can be learned from this experience? And what’s the best way for companies to protect themselves against this kind of crisis in the future? The answer will certainly involve a combination of different approaches – but new mathematical methods developed by the Fraunhofer Institute for Industrial Mathematics ITWM look likely to be a very promising piece of the puzzle. These methods aim to calculate how the risks posed by supply shortages can be reduced significantly at very little extra cost.

 Nobody ever expected hospitals to be struggling to get hold of the face masks and other personal protective equipment they need. The supply chain had always run smoothly in the past, yet the coronavirus crisis has now caused shortages of these products on multiple occasions. Previously, these supply chains had worked well – but the necessary restrictions on the global flow of goods led them to collapse.In many cases, for example, Chinese suppliers were unable to make deliveries even while factories in Germany were still working as normal, a situation that had a knock-on effect on goods production in Germany. And viruses are not the only potential risk: international suppliers can be paralyzed by all kinds of unforeseen factors, from natural disasters such as tsunamis, earthquakes, storms and floods to strikes or other unexpected political developments. If a company chooses to rely on just one supplier for its production needs in order to reduce costs, this can have devastating consequences that may even bring production to a complete standstill. It can take a very long time indeed for other suppliers to ramp up their production and start delivering the required products.
 
Analyzing and safeguarding supply chains
This is where methods developed by Fraunhofer ITWM come into play. “The algorithms analyze how diversified the supply chains are in different areas of the company and thus how great the risk is of running into critical supply problems in an emergency, in other words in the event of regional or global disruption,” says Dr. Heiner Ackermann, deputy head in the Department of Optimization at Fraunhofer ITWM in Kaiserslautern. “The question is how you can minimize the risk of supply shortfalls without incurring significant additional costs.” The dilemma is similar to that of buying a house: Is it best to opt for the lowest possible interest rates, even though there is a risk that follow-up financing will offer much worse rates? Or is it best to play safe and pay slightly higher interest rates from the start if that means having the reassurance of reasonably priced financing for the entire term?
 
Companies also have to get the right balance between risk and costs. If a company chooses to rely solely on the cheapest supplier, they are taking a major risk. But if they procure a raw material from multiple suppliers at the same time, that risk drops significantly. “And in this case the difference in cost is much lower than the difference in risk,” says Ackermann. In other words, the risks fall dramatically even when a company increases its costs by just a few percent – so it is possible to eliminate much of the risk by accepting just a slight rise in costs. Companies can use the algorithm to discover what would work best in their particular situation. “This method lets companies optimize their supply chains based on multiple criteria, helping them to find the optimal balance between costs and risks,” says Ackermann. “The underlying algorithms work equally well whether you are dealing with supply shortages caused by an earthquake or a virus. So, unlike existing software solutions, we don’t try to make assumptions as to the likelihood of any particular scenario.” With this new method, a company starts by entering various parameters – for example areas in which they think disruption could be likely and how long that disruption might last. The algorithms then calculate various cost/risk trade-offs for this exact raw material, including the possible allocations of suppliers that would correspond to each point on the scale. They even take into account options such as storing critical products in order to cushion any temporary supply shortfalls.
 
Substituting raw materials during supply shortages      
Another option the algorithms take into account is whether a raw material could potentially be replaced by different materials in the event of a supply bottleneck. If so, this can be taken into consideration from the start. Essentially, the method calculates the costs and risks of different courses that a company can follow in regard to their suppliers. Procter & Gamble is already using a software-based variant of this methodology which has been specially tailored to its needs.

Source:

Fraunhofer Institute for Industrial Mathematics ITWM

Protective masks for Augsburg University Hospital (c) Fraunhofer IGCV
14.04.2020

Protective equipment from 3d printers

  • Fraunhofer IGCV supplies protective equipment made via 3d printers to university hospital Augsburg

For more than a week, the Institute for Materials Resource Management at the University of Augsburg has been supplying the University Hospital Augsburg with protective masks from 3D printers. In order to meet the enormous demand for absolutely necessary protective equipment for the the needs of hospital staff, a call for support was sent to cooperation partners - Augsburg University of Applied Sciences and Fraunhofer IGCV are stepping in.
 

  • Fraunhofer IGCV supplies protective equipment made via 3d printers to university hospital Augsburg

For more than a week, the Institute for Materials Resource Management at the University of Augsburg has been supplying the University Hospital Augsburg with protective masks from 3D printers. In order to meet the enormous demand for absolutely necessary protective equipment for the the needs of hospital staff, a call for support was sent to cooperation partners - Augsburg University of Applied Sciences and Fraunhofer IGCV are stepping in.
 

Fast communication in the research network:
Production of 3D-printed parts accelerates in the shortest possible time
Without further ado, an internal university group searched for possibilities of manufacturing via 3D printing. Prof. Dr. Markus Sause and Prof. Dr. Kay Weidenmann of the Institute for Materials Resource Management at the University of Augsburg immediately agreed and pulled out all the stops to start production as quickly as possible. In order to provide as many protective masks as possible in the shortest possible time, an appeal was also made to existing cooperation partners. They found what they were looking for in their direct colleague Prof. Dr. Johannes Schilp, Professor of Production Informatics at the University of Augsburg and Head of the Processing Technology Department at the Augsburg Fraunhofer IGCV: Max Horn, research associate at the Fraunhofer Institute, and Paul Dolezal from the FabLab (production laboratory) at Augsburg University of Applied Sciences immediately promised their help. "Thanks to the excellent cooperation of our team, the first parts were produced in our laboratory for additive manufacturing just a few hours after the first telephone call," Max Horn recalls. "With the support of the Augsburg University of Applied Sciences and the Fraunhofer IGCV, the production capacity of 50 masks per day could be significantly increased," Markus Sause is pleased to report.
          

Printing masks with Fused Deposition Modeling (FDM)
Fused Deposition Modeling (FDM) was selected as the manufacturing process for the face protection. This means that the mask is created by forcing fusible plastic through a nozzle and applying it in layers in individual lanes. In addition to an extensive laboratory for metal-based additive manufacturing, the Fraunhofer IGCV operates a new laboratory unit with various FDM printers. Due to the simplicity of the process and its great flexibility, it is particularly suitable for prototypes and sample components. "However, the masks produced are by no means only illustrative objects", adds Georg Schlick, Head of the Components and Processes Department at the Fraunhofer IGCV. The team processed durable polymers for the parts, which have good resistance to the disinfectants used in the hospital. This results in high-quality components that are ideally suited for multiple use.
 
Additive manufacturing for flexible production
In the meantime, some bottlenecks have been overcome: The Institute for Materials Resource Management at the University of Augsburg is switching back to production processes for the manufacture of face masks that are better suited for the production of large quantities. "The great strength of additive manufacturing lies rather in the production of very complex components with smaller quantities," explains Matthias Schmitt, group leader for additive manufacturing at the Fraunhofer IGCV. "But 3D printing also enables us to act at very short notice and to compensate for lack of capacity for almost any component as required," Schmitt continues. Thanks to the flexibility, motivation and expertise of all cooperation partners, a complete production and supply chain for the face masks was implemented within a few days. Georg Schlick therefore emphasizes the need for good networking and rapid exchange between the research institutions. "The close networking within the 3D printing community enables short communication channels and fast action. This can save lives in this case."

Source:

Fraunhofer Institute for Casting, Composite and Processing Technology IGCV