Textination Newsline

Skin injuries caused by prolonged pressure often occur in people who are unable to change their position independently – such as sick newborns in hospitals or elderly people. Thanks to successful partnerships with industry and research, Empa scientists are now launching two smart solutions for pressure sores.

If too much pressure is applied to our skin over a long period of time, it becomes damaged. Populations at high risk of such pressure injuries include people in wheelchairs, newborns in intensive care units and the elderly. The consequences are wounds, infections and pain.

Treatment is complex and expensive: Healthcare costs of around 300 million Swiss francs are incurred every year. "In addition, existing illnesses can be exacerbated by such pressure injuries," says Empa researcher Simon Annaheim from the Biomimetic Membranes and Textiles laboratory in St. Gallen. According to Annaheim, it would be more sustainable to prevent tissue damage from occurring in the first place. Two current research projects involving Empa researchers are now advancing solutions: A pressure-equalizing mattress for newborns in intensive care units and a textile sensor system for paraplegics and bedridden people are being developed.

Optimally nestled at the start of life
The demands of our skin are completely different depending on age: In adults, the friction of the skin on the lying surface, physical shear forces in the tissue and the lack of breathability of textiles are the main risk factors. In contrast, the skin of newborns receiving intensive care is extremely sensitive per se, and any loss of fluid and heat through the skin can become a problem. "While these particularly vulnerable babies are being nursed back to health, the lying situation should not cause any additional complications," says Annaheim. He thinks conventional mattresses are not appropriate for newborns with very different weights and various illnesses. Annaheim's team is therefore working with researchers from ETH Zurich, the Zurich University of Applied Sciences (ZHAW) and the University Children's Hospital Zurich to find an optimal lying surface for babies' delicate skin. This mattress should be able to adapt individually to the body in order to help children with a difficult start in life.

In order to do this, the researchers first determined the pressure conditions in the various regions of the newborn's body. "Our pressure sensors showed that the head, shoulders and lower spine are the areas with the greatest risk of pressure sores," says Annaheim. These findings were incorporated into the development of a special kind of air-filled mattress: With the help of pressure sensors and a microprocessor, its three chambers can be filled precisely via an electronic pump so that the pressure in the respective areas is minimized. An infrared laser process developed at Empa made it possible to produce the mattress from a flexible, multi-layered polymer membrane that is gentle on the skin and has no irritating seams.

After a multi-stage development process in the laboratory, the first small patients were allowed to lie on the prototype mattress. The effect was immediately noticeable when the researchers filled the mattress with air to varying degrees depending on the individual needs of the babies: Compared to a conventional foam mattress, the prototype reduced the pressure on the vulnerable parts of the body by up to 40 percent.

Following this successful pilot study, the prototype is now being optimized in the Empa labs. Simon Annaheim and doctoral student Tino Jucker will soon be starting a larger-scale study with the new mattress with the Department of Intensive Care Medicine & Neonatology at University Children's Hospital Zurich.

Intelligent sensors prevent injuries
In another project, Empa researchers are working on preventing so-called pressure ulcer tissue damage in adults. This involves converting the risk factors of pressure and circulatory disorders into helpful warning signals.

If you lie in the same position for a long time, pressure and circulatory problems lead to an undersupply of oxygen to the tissue. While the lack of oxygen triggers a reflex to move in healthy people, this neurological feedback loop can be disrupted in people with paraplegia or coma patients, for example. Here, smart sensors can help to provide early warning of the risk of tissue damage.

In the ProTex project, a team of researchers from Empa, the University of Bern, the OST University of Applied Sciences and Bischoff Textil AG in St. Gallen has developed a sensor system made of smart textiles with associated data analysis in real time. "The skin-compatible textile sensors contain two different functional polymer fibers," says Luciano Boesel from Empa's Biomimetic Membranes and Textiles laboratory in St. Gallen. In addition to pressure-sensitive fibers, the researchers integrated light-conducting polymer fibers (POFs), which are used to measure oxygen. "As soon as the oxygen content in the skin drops, the highly sensitive sensor system signals an increasing risk of tissue damage," explains Boesel. The data is then transmitted directly to the patient or to the nursing staff. This means, for instance, that a lying person can be repositioned in good time before the tissue is damaged.

Patented technology
The technology behind this also includes a novel microfluidic wet spinning process developed at Empa for the production of POFs. It allows precise control of the polymer components in the micrometer range and smoother, more environmentally friendly processing of the fibers. The microfluidic process is one of three patents that have emerged from the ProTex project to date.

Another product is a breathable textile sensor that is worn directly on the skin. The spin-off Sensawear in Bern, which emerged from the project in 2023, is currently pushing ahead with the market launch. Empa researcher Boesel is also convinced: "The findings and technologies from ProTex will enable further applications in the field of wearable sensor technology and smart clothing in the future."

Just in time for summer: The Swiss start-up Swijin is launching a new sportswear category with its SwimRunner – a sports bra together with matching bottoms that works as both swimwear and running gear and dries in no time. The innovative product was developed together with Empa researchers in an Innosuisse project. The SwimRunner can be tested this weekend at the Zurich City Triathlon.
 
A quick dip after jogging without having to change clothes? Swijin (pronounced Swie-Djin), a new Swiss TechTex start-up, is launching its first product, the SwimRunner: a sports bra and bottoms that function as both swimwear and running gear and dry in a flash.

For the first time, this innovation enables women to make a smooth transition between land and water sports without having to change clothes. For example, hikers and runners can easily go into the water to cool off. Stand-up paddlers wearing the SwimRunner enjoy unrestricted freedom of movement and at the same time sufficient support, both on the board and in the water.
Science to boost sports performance
 
What appears to be a relatively simple requirement at first glance has turned out to be an extremely complex product to develop. As part of an Innosuisse project, Swijin collaborated with the Empa Biomimetic Membranes and Textiles laboratory in St. Gallen. Led by Empa engineer Martin Camenzind, the researchers first defined the requirements for the material and cut of the sports bra. "During development, we faced three main challenges: On the one hand, the product had to meet the requirements of a heavy-duty sports bra on land. At the same time, it had to maintain the compression of a swimsuit in the water – and do so with a very short drying time," says Camenzind.

Since no comparable garment exists on the market yet, the team also developed new tests for evaluating the high-performance textile. "Moreover, we designed a mannequin: a model of the female torso that can be used to measure the mechanical properties of bras," explains the researcher. In addition to scientific findings, the product development process also incorporated a great deal of expertise from sports physiologists, textile engineers, industry specialists, designers and, of course, female athletes.

Highest demands
Many of these athletes come from the swimrun scene. Swimrun is a fast-growing adventure sport that originated in the skerry gardens of Sweden. Unlike triathletes, who start out by swimming, then bike, and finally run, swimrunners switch back and forth between trail running and open water swimming throughout the race. The intensity of this sport provided Swijin with the optimal conditions for product development – and gave its name to the first collection, SwimRunner. "The feedback from female athletes was one of the deciding factors for the success of the product. They often swim and run for six to seven hours at a stretch. When they were satisfied with our prototypes, we knew: The SwimRunner is ready for market," says Swijin founder Claudia Glass.

The product idea first came to Claudia Glass while she was on vacation on Mallorca. During her morning runs, she longed to be able to take a quick dip in the sea. "Sports bras, however, are not designed for swimming," the founder explains. "They soak up the water and never seem to dry because of their thick compression material. Last summer, I wore the SwimRunner prototype all day. In the morning, I ran to Lake Zurich with my dog and jumped in. When I got back home, I could have just sat down at my desk and started working – I was completely dry and felt very comfortable."

Design and sustainability
The young company makes a point of combining engineering and design. Swijin's creative director, Valeria Cereda, is based in the center of the world's fashion capital, Milan, and infuses her experience with luxury brands into Swijin's aesthetic. But as a former competitive swimmer, she is also focused on functionality.

Swijin's high-performance products can only be realized with synthetic materials. The young company is determined to reduce the environmental impact of its products to a minimum. The tight supply chain keeps the CO₂ footprint low. The materials of the SwimRunner are 100% made in the EU and designed for quality.

Traditional garment labels only provide information about where the garment was made. Swijin is working with supplier Avery Dennison to provide all products with a Digital Identity Label. This gives consumers detailed information about the entire value chain, right down to the textile manufacturer's investment in reducing its carbon footprint and the use of the water-based, solvent-free logo. Swijin packages all materials in Cradle-to-Cradle Gold certified packaging, which is produced by Voegeli AG in Emmental.

Furthermore, Swijin proactively addresses the challenges at the end of the product life cycle. In order to come one step closer to a truly circular economy for functional textiles, Swijin participates in the Yarn-to-Yarn® pilot project of Rheiazymes AG as a lighthouse partner. This biotech solution uses microorganisms and enzymes to generate new starting materials directly from used textiles in a climate-neutral way. When customers return end-of-life Swijin products – for which the company offers incentives – the high-quality monomers can be returned to the supply chain in their original quality: true circularity.

"As an emerging brand, we have both the obligation and the luxury of choosing partners whose vision and values align with our own," says Claudia Glass. "I had a clear understanding of what kind of brand I would buy, but I couldn't find it anywhere. With Swijin, we feel obligated to actually make our values a reality."

Stylish sensors to wear 
With sensors that measure health parameters and can be worn on the body, we do let technology get very close to us. A collaboration between Empa and designer Laura Deschl, sponsored by the Textile and Design Alliance (TaDA) of Eastern Switzerland, shows that medical monitoring of respiratory activity, for example, can also be very stylish – as a shirt.
 
With sensors that measure health parameters and can be worn on the body, we do let technology get very close to us. A collaboration between Empa and designer Laura Deschl, sponsored by the Textile and Design Alliance (TaDA) of Eastern Switzerland, shows that medical monitoring of respiratory activity, for example, can also be very stylish – as a shirt.

The desire for a healthy lifestyle has triggered a trend towards self-tracking. Vital signs should be available at all times, for example to consistently measure training effects. At the same time, among the continuously growing group of people over 65, the desire to maintain performance into old age is stronger than ever. Preventive, health-maintaining measures must be monitored if they are to achieve the desired results. The search for measurement systems that reliably determine the corresponding health parameters is in full swing. In addition to the leisure sector, medicine needs suitable and reliable measurement systems that enable efficient and effective care for an increasing number of people in hospital and at home. After all, the increase in lifestyle diseases such as diabetes, cardiovascular problems or respiratory diseases is putting a strain on the healthcare system.

Researchers led by Simon Annaheim from Empa's Biomimetic Membranes and Textiles laboratory in St. Gallen are therefore developing sensors for monitoring health status, for example for a diagnostic belt based on flexible sensors with electrically conductive or light-conducting fibers. However, other, less technical properties can be decisive for the acceptance of continuous medical monitoring by patients. For example, the sensors must be comfortable to wear and easy to handle – and ideally also look good.

This aspect is addressed by a cooperation between the Textile and Design Alliance, or TaDA for short, in eastern Switzerland and Empa. The project showed how textile sensors can be integrated into garments. In addition to technical reliability and a high level of comfort, another focus was on the design of the garments. The interdisciplinary TaDA designer Laura Deschl worked electrically conductive fibers into a shirt that change their resistance depending on how much they are stretched. This allows the shirt to monitor how much the subjects' chest and abdomen rise and fall while they breathe, allowing conclusions to be drawn about breathing activity. Continuous monitoring of respiratory activity is of particular interest for patients during the recovery phase after surgery and for patients who are being treated with painkillers. Such a shirt could also be helpful for patients with breathing problems such as sleep apnea or asthma. Moreover, Deschl embroidered electrically conductive fibers from Empa into the shirt, which are needed to connect to the measuring device and were visually integrated into the shirt's design pattern.

The Textile and Design Alliance is a pilot program of the cultural promotion of the cantons of Appenzell Ausserrhoden, St.Gallen and Thurgau to promote cooperation between creative artists from all over the world and the textile industry. Through international calls for proposals, cultural workers from all disciplines are invited to spend three months working in the textile industry in eastern Switzerland. The TaDA network comprises 13 cooperation partners – textile companies, cultural, research and educational institutions – and thus offers the creative artists direct access to highly specialized know-how and technical means of production in order to work, research and experiment on their textile projects on site. This artistic creativity is in turn made available to the partners as innovative potential.

• Jury presents two awards for outstanding fabric Innovation

The next PERFORMANCE DAYS will take place from November 3-4, 2022 at the MOC Ordercenter in Munich. Visitors also have the opportunity to follow the events online. Thanks to the new platform The Loop, all important information is available all year round, including current trends, new material innovations and extended tools for ease of use. The focus of the curated PERFORMANCE FORUM continues in winter honoring the winners of both awards. This year, in addition to a PERFORMANCE AWARD, the jury also presented an ECO PERFORMANCE AWARD.

Sustainable & innovative: the award winners of the Winter 2024/25 season
As part of the winter edition of the sourcing fairs, the fabric highlights plus accessory trends in the individ-ual categories for the winter season 2024/25 will be on display at the PERFORMANCE FORUM.
 
Particularly striking this year was the high levels of innovation and quality of many submitted fabrics on the one hand, but on the other hand – also as a result of this year’s Focus Topic – the sustainable component. “We wish to enable our visitors to make the best decision in terms of material selection, also in terms of CO₂ neutrality and ultimately also in terms of textile recyclability,” states Marco Weichert, CEO of PERFORMANCE DAYS.  

Nevertheless, the road to CO₂ neutrality remains a long one, yet the approaches adopted with the Focus Topic ongoing until the coming spring can be seen in a positive light. In general, manufacturers are increasingly relying on the use of natural fibers when possible, such as Tencel™ or other plant fibers – most of them also prove a low CO₂ balance during production. The issue of recycling comes with many new facets and wide spanning trends. The portfolio ranges from the recycling of marine waste, such as old buoys, plastic waste or fishing nets, to the recycling of waste from the automotive and computer industries, such as old car tires or computer chips. Natural dyeing methods are also gaining in importance, as is the return of fabrics to the textile cycle.

In the Marketplace, visitors have the opportunity to view over 19,000 products from exhibitors, including the fabric highlights of the individual categories at the PERFORMANCE FORUM. In order for visitors to experience the fabrics in terms of haptics, design and structure in as realistic a form as possible, the PERFORMANCE FORUM has been equipped with innovative 3D technology, including innovative tools such as 3D images, video animations and U3MA data for download.

The jury has also presented two awards for outstanding fabrics for the Winter Season 2024/25 – with the PERFORMANCE AWARD going to Long Advance Int. Co Ltd., and the ECO PERFORMANCE AWARD to PontetortoSpa.

The ECO PERFORMANCE AWARD goes to “9203/M/RC” from PontetortoSpa: High Performance despite maximum sustainability
The fabric is a blend of 23 % hemp, 69 % recycled polyester and 9 % recycled elastane. Moreover, the material boasts a low CO₂ footprint during production and focuses on low release levels of microplastics into the environment. “9203/M/RC” belongs to Pontetorto's Techno Stretch organic series, which boast an excellent 4-way stretch with great elasticity. In addition, it guarantees fast drying and optimal breathability. The polyester yarn is manufactured by the mechanical recycling of plastic bottles. Hemp, the most water–repellent among natural fibers, allows for quick drying and provides optimal comfort. Hemp is considered an extremely sustainable natural fiber due to its origin from an anti–bacterial plant that requires neither pesticides nor chemical fertilizers during its growth and consumes extremely little water.

PERFORMANCE AWARD for “LPD-22015-Y4E” from Long Advanced Int. Co. Ltd.: Perfect recycling for top performance
The monocomponent 2layer fabric is a mixture of 45 % polyester mechanical stretch and 55 % recycled polyester from recycled textiles, laminated with a PET Membrane, with a weight of 147 grams.
The special feature of the “LPD 22015-Y4E” is the recycling of fabric and cutting waste. Waste is thus returned to the textile cycle and used to spin new yarn. In the future, manufacturers will have to ensure that all fabric can be recycled. Accordingly, the production of waste is then reduced by 30 % compared to conventional processes. Furthermore, the jury praised the feel and the extraordinary look of the material.

The entire PERFORMANCE FORUM including both awards can be experienced live at the fair on October 26-27, 2022 in Portland, Oregon, and in Munich at the PERFORMANCE DAYS fair on November 03-04, 2022. As of now, all innovative materials can also be found online in the Marketplace of the PERFORMANCE DAYS Loop, with the option to order free samples directly from the exhibitor.

Alzheimer's and other dementias are among the most widespread diseases today. Diagnosis is complex and can often only be established with certainty late in the course of the disease. A team of Empa researchers, together with clinical partners, is now developing a new diagnostic tool that can detect the first signs of neurodegenerative changes using a sensor belt.

Forgetfulness and confusion can be signs of a currently incurable ailment: Alzheimer's disease. It is the most common form of dementia that currently affect around 50 million people worldwide. It mainly afflicts older people. The fact that this number will increase sharply in the future is therefore also related to the general increase in life expectancy.

If dementia is suspected, neuropsychological examinations, laboratory tests and demanding procedures in the hospital are required. However, the first neurodegenerative changes in the brain occur decades before a reduced cognitive ability becomes apparent. Currently, these can only be detected by expensive or invasive procedures. These methods are thus not suitable for extensive early screenings on a larger scale. Empa researchers are working with partners from the Cantonal Hospital and the Geriatric Clinic in St. Gallen on a non-invasive diagnostic method that detects the early processes of dementia.

Signs in the unconscious
For the new method, the researchers Patrick Eggenberger and Simon Annaheim from Empa's Biomimetic Membranes and Textiles lab in St. Gallen relied on a sensor belt that has already been used successfully for ECG measurements and has now been equipped with sensors for other relevant parameters such as body temperature and gait pattern. This is because long before memory starts to deteriorate in dementia, subtle changes appear in the brain, which are expressed through unconscious bodily reactions.

These changes can only be recorded precisely when measurements are taken over a longer period of time, though. "It should be possible to integrate the long-term measurements into everyday life," explains Simon Annaheim. Skin-friendly and comfortable monitoring systems are essential for measurements that are suitable for everyday use. The diagnostic belt is therefore based on flexible sensors with electrically conductive or light-conducting fibers as well as sensors for motion and temperature measurement.

To enable such long-term measurements to be used for monitoring neurocognitive health, the researchers are integrating the collected data into in-house developed mathematical models. The goal: an early warning system that can estimate the progression of cognitive impairment. Another advantage is that the data measurements can be integrated into telemonitoring solutions and can thus improve patient care in their familiar environment.

Suspicious monotony
The human body is able to keep its temperature constant in a range of 1 degree Celsius. The values naturally oscillate in the course of the day. This daily rhythm changes with age and is conspicuous in neurodegenerative diseases such as dementia or Parkinson's disease. In Alzheimer's patients, for example, the core body temperature is elevated by up to 0.2 degrees Celsius. At the same time, the spikes in daily temperature fluctuations are dampened.

In a study, the researchers have now been able to show that altered skin temperature readings measured with the sensor belt actually provide an indication of the cognitive performance of test subjects – and can do so well before dementia develops. The test subjects in the study included healthy people with or without mild brain impairment. This mild cognitive impairment (MCI) does not represent a disability in everyday life, but it is considered a possible precursor to Alzheimer's disease. The subjects took part in long-term measurements and neuropsychological tests. It was found that a lower body temperature, which fluctuated more throughout the day, was linked to a better cognitive performance. In individuals with MCI, body temperature varied less and was slightly elevated overall.

The heartbeat is also subject to natural variations that show how our nervous system adapts to sudden challenges. The small silence between two heartbeats, about one second in duration, has great significance for our health: If this pause always remains the same, our nervous system is not at its best.

A study by researchers from ETH Zurich determined that poorer measurements in older, healthy people can be improved within six months through cognitive-motor dance training. In these "exergames," the test subjects imitated sequences of steps from a video. In contrast, participants who instead only trained in straight lines on a treadmill, but also trained their memory, benefited less.

"The point is to intervene early with appropriate training as soon as the first negative signs can be measured," says Patrick Eggenberger. "With our sensor system, any improvements in cognitive performance can be tracked through movement-based forms of therapy." Studies with long-term monitoring will now be used to clarify how the sensor measurements can be used to predict the progression of mild brain disorders.

Further information
Dr. Simon Annaheim
Biomimetic Membranes and Textiles   
Phone +41 58 765 77 68
Simon.Annaheim@empa.ch

The Fraunhofer Institute for Biomedical Engineering IBMT, with its long-term expertise in nanotoxicity and nanosafety testing, contributes to a new EC project for water saving solutions for textile industry. This industry uses a vast amount of water for different steps in the textile dyeing process. It also produces a lot of wastewater, which contains a range of chemicals and dyes.

Breakthrough innovations are needed in energy intensive industries to recycle water and create closed loops in industrial processes. 20% of global industrial water pollution comes from textile manufacturing. To reduce the high amount of freshwater used in textile industry, the EC-funded Waste2Fresh project will develop a closed-loop process for textile manufacturing factories in which wastewater is collected, recycled and used again. Novel and innovative catalytic degradation approaches with highly selective separation and extraction techniques will be developed, based on nanotechnology. According to the European Commission, such “closed loops“ would significantly reduce the use of fresh water and improve water availability in the relevant EU water catchment areas, as outlined in the Water Framework Directive.

Closed loop recycling system for wastewater from textile manufacturers
Waste2Fresh meets the above challenges and industry needs by developing and demonstrating (to TRL 7) a closed loop recycling system for wastewater from textile manufacturing factories; to counteract freshwater resource scarcities and water pollution challenges exacerbated by energy intensive industries which are major users of fresh water (for e.g., processing, washing, heating, cooling).

The Waste2Fresh technology is developed to reduce current use of freshwater resources and considerably increases the recovery of water, energy and other resources (organics, salts and heavy metals). The result is a 30% increase in resource and water efficiency compared to the state-of-the-art. The system will ultimately lead to considerable environmental improvements and accordingly reduce the EC and global environmental footprint.

Fraunhofer IBMT expertise in human-toxicity and -safety testing
The Fraunhofer Institute for Biomedical Engineering IBMT will be primarily responsible for performing nanotoxicity and nanosafety testing during the whole technology process (from development to demonstration), ensuring that the developed system and processes meet relevant safety regulations. The Fraunhofer IBMT collaborates with all consortium partners developing and using to develop approaches for ensuring that the developed nanomaterial-based components meet relevant health and safety standards during their use.

For the hazard assessment of the developed nanomaterials, the Fraunhofer IBMT will perform a set of in vitro toxicity studies using commercially available human cell lines. The results of this toxicity studies will be the basis for the development of relevant safety procedures for handling and using the developed recycling technology.

Project funding: H2020-EU.2.1.5.3. - Sustainable, resource-efficient and low-carbon technologies in energy-intensive process industries

Duration: 12/2020- 11/2023

Coordinator:
KONYA TEKNIK UNIVERSITESI, Turkey

Project partners:
CENTRE FOR PROCESS INNOVATION LIMITED LBG, United Kingdom
ERAK GIYIM SANAYI VE TICARET ANONIM SIRKETI, Turkey
FRAUNHOFER GESELLSCHAFT ZUR FOERDERUNG DER ANGEWANDTEN FORSCHUNG E.V., Fraunhofer-Institut für Biomedizinische Technik IBMT, Germany
INNOVATION IN RESEARCH & ENGINEERING SOLUTIONS, Belgium
INSTYTUT MOLEKULYARNOI BIOLOGII I GENETYKY NAN UKRAINY, Ukraine
L'UREDERRA, FUNDACION PARA EL DESARROLLO TECNOLOGICO Y SOCIAL, Spain
NANOFIQUE LIMITED, United Kingdom
NANOGENTECH LTD, United Kingdom
PCI MEMBRANES SPOLKA Z OGRANICZONA ODPOWIEDZIALNOSCIA, Poland
STIFTELSE CSDI WATERTECH, Norway
THE OPEN UNIVERSITY, United Kingdom
ULUDAG CEVRE TEKNOLOJILERI ARGE MERKEZI SANAYI VE TICARET LIMITED SIRKETI, Turkey
UNIVERSIDAD INDUSTRIAL DE SANTANDER, Colombia
UNIVERSITA DEGLI STUDI DI TRENTO, Italy
VEREALA GMBH, Switzerland
VSI SOCIALINES INOVACIJOS SVARESNEI APLINKAI, Lithiani

Design & Development GmbH Textile Consult, founder and trade fair organiser of PERFORMANCE DAYS in Munich, is eyeing the new year with a lot of hope. After the launch of Functional Fabric Fair by PERFORMANCE DAYS in New York City and Portland together with Reed Exhibitions, PERFORMANCE DAYS is further expanding its portfolio. In cooperation with Tengda Exhibition, the foundations have been laid for a new trade fair for functional textiles in Shanghai. On the 28th and 29th of September 2021, the FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS will premiere at the renowned Shanghaimart Exhibition Center, offering ample space for future trends displayed by more than 100 exhibitors.

As the new year is entered, the PERFORMANCE DAYS team looks forward with great optimism and confidence to the launch of the new fair for functional textiles - the FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS - in Shanghai. China counts as one of the fastest growing and more important future markets worldwide, especially when it comes to functional apparel. The oriental gateway is proving to be innovative, trendsetting, and more recently, increasingly sustainable.

This development is also reflected in the activities of yarn and fabric producers, with local sportswear brands enjoying significant growth. One can be particularly proud of the cooperation with Tengda Exhibition, which is renowned for providing professional services for manufacturers and trading companies in the textile, fibre and various apparel segments. Their services range from fairs to sourcing events in China, Japan, Spain, Great Britain and Turkey.

The premiere of FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS will be held at Shanghaimart Exhibition Center on the 28th and 29th of September. Here too, a conscious decision was made for specifically choosing it as an influential trade fair and trading centre. At present, almost 1.000 companies from more than 20 countries and regions have set up offices and showrooms on site, most of them renowned industry experts from the textile and fabric branches.

Qualitative, informative & innovative: Shanghai fair borrows from the Look & Feel of PERFORMANCE DAYS
The FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS event team will transfer the already established concept of PERFORMANCE DAYS from Munich to Shanghai. This will lend the fair in China not only the Look & Feel of a familiar concept, but above all the same aspirations in terms of quality. And indeed with a total of 5.300 square metres, more than 100 Chinese and international exhibitors will have sufficient exhibition space. In line with this, the fair organisers wish to guarantee industry visitors to the fair a balanced assortment of top brands from the world of functional textiles.

The fair will focus on the latest trends and innovations from the world of textiles, yarns, membrane technologies and accessories for functional sportswear, workwear, performances wear and lifestyle wear. Demand is accordingly high, with top manufacturers such as Romrol, Sanchuan and Winsun confirming their participation along with other well-known brands such as Anta, Bosideng, Decathlon, Descente, Eral, Fila Hotwind, Icicle, Jeep, Kailas, Kappa, Li-Ning, Peace Bird, Peak, Semir, Skechers, Toread, Uniqulo, Zuczug and 361°, to name a few.

As is usual at the trade fair in Munich, there will also be an informative supporting program with exciting expert talks and discussion panels on sustainable and industry-relevant topics. The centrepiece of the fair, the PERFORMANCE FORUM, rounds off the comprehensive package. Materials from exhibitors curated on-site will be displayed on this specially designed platform. Trade fair general manager Marco Weichert had this to say: “We are thrilled to be starting the new year with such inspiring new projects. The launch of FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS in September is the result of many years of monitoring of the Asian market and its increasing demand for curated and high quality sustainable offerings. We are especially pleased about the partnership with Tengda Exhibition, who are real professionals in this field. We are absolutely convinced that the PERFORMANCE DAYS concept, which we will adopt in Shanghai, will be very well received by local trade fair visitors and exhibitors.”

Noel Tian, Managing Director, Tengda Exhibition, adds: “The functional apparel market in China is growing so fast, the brands here need one professional, focused and high class platform for functional textiles just like PERFORMANCE DAYS. We are really excited to launch FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS while adopting 100% the PERFORMANCE DAYS concept in the special new year 2021. It is a great honour to have this partnership with Design & Development GbmH Textile Consult and their world famous trade fair brand.“

FUNCTIONAL TEXTILES SHANGHAI by PERFORMANCE DAYS
September 28-29th, 2021
Shanghaimart Exhibition Center No.99 Xingyi Road,Chang Ning District,Shanghai China
Contact:
info@functionaltextilesshanghai.com or +86-21-60493344.

THE INSEPARABLE TRIO UNVEILS ITS NEW STRENGTHS
The next edition of Première Vision Paris, taking place from 17 to 19 September 2019 at Paris Nord Villepinte, will present the new materials and creative stimuli for the autumn-winter 2020-21 season.

This major event for all fashion industry players brings together, twice a year, the six principle activities in the upstream sector: yarns, fabrics, leathers, designs, accessories and clothing. 

In the spotlight: the pinnacle of sportswear, its influence on collections and the development of accompanying technological innovations and technical materials. To address these issues, which now permeate all of fashion, Première Vision’s Sport & Tech sector will be prominently featured at the next show. Located in the textile universe of Première Vision Fabrics, in Hall 6, it will bring together 80 exhibiting weavers - including 8 newcomers - to accompany brands and designers looking for inspiration. Their new products will be unveiled in a dedicated space, the Sport & Tech forum, designed around a core theme of «A matter of protection» (protection and innovation).
 
Sportswear gains ground, playing a major role in collections
The global sportswear market grew steadily between 2011 and 2016, reaching $280 billion in 2016¹. It has entered into consumer habits and is synonymous with comfort and technical expertise, as well as style and creativity. And France is no exception: according to a recent study², French consumers wear sport clothes 1 day out of 5, and 25% of consumers see the latter as a «trend». This growing phenomenon has a significant influence on the industry and on those who design and produce clothing and accessories, whether fashion brands using technical materials for their ready-to-wear collections or sports brands developing lifestyle lines. It was to best support these brands that Première Vision developed an offer specially focused on this area within its flagship event: Première Vision Paris.
     
Protection and insulation: technological contributions
Each edition, the Première Vision teams identify a strong theme based on their international research. As sport wear collections grow increasingly popular, the added performance and technology in these product lines is becoming ever more critical. Consumers have been able to try out the innovative features integrated in their sport apparel for several years now, and expect the same functionality in their everyday clothing. «A matter of protection» has thus been selected as the season’s theme for the Sport & Tech sector. A fashion theme that will be particularly highlighted in the dedicated forum, which will present a broader offer of fabrics and high-performance materials from the show’s weavers, knitters and finishers to meet the needs of industry professionals.

Marguerite Coiraton, Show Manager of Première Vision Fabrics and in charge of the Sport & Tech trail, added: « The September 2019 edition is particularly interested in how clothes are used to protect against the elements, a theme which will certainly dominate the autumn-winter 20-21 collections. This concept encompasses, for example, insulation, with the development of thermo-active materials, fabrics and fibres equipped with nanotechnologies, and intelligent augmented protection».

In addition to the dedicated sector within Fabrics, Première Vision also offers a Sport & Tech itinerary - available on the show app - bringing together nearly 700 exhibitors specialised in sports and technical materials who can be found at the show. This complete panorama comprises spinners, weavers, knitters, tanners, accessory makers, textile designers and fashion manufacturers.
 
SPOTLIGHT ON: A preview of a selection of Sport & Tech exhibitors

• Polartec: an insulation solution used by outdoor sports enthusiasts for nearly twenty years, Polartec® fabrics come in a variety of textures and weights and are specifically designed to improve performance in a wide range of environments;
• Pontetorto SportSystem: founded in 1952, Pontetorto offers a wide range of products from polar fleeces to stretch fabrics, including multilayers, windproofs, waterproof membranes and breathable materials;
• Schoeller textiles: a Swiss company specialised in developing innovative textiles, especially warm and resistant fabrics. ‘Cosmopolitan’, its multifunctional collection, perfectly meets the growing demand for high-performance style, with fabrics where outstanding performance features do not preclude a natural feel and perfect comfort;
• Swing by Gruppocinque: an Italian fabric manufacturer using innovative technologies and finishings such as resins, membranes and high-performance treatments;
• Mackent: has an offer of highly original textiles with a focus on shock-absorbing spacer knits for lingerie/ ready-to-wear pieces;
• Sportwear Argentona: a Spanish brand specialising in fabric manufacturing, is presenting its ‘2.0 fabrics’ with excellent breathability and high comfort. These are adaptable, lightweight, elastic, compressing with an innovative aesthetic.
• Global Merino: a maker of technical textiles using merino wool as a base product. It identifies the performance requirements of the item to be created and develops the fabric according to the end use;
• Shepherd: a vertically integrated producer of merino knits and apparel, including the world’s finest 13.5-micron merino fabric.

New performance codes to better identify innovation
4 new Performance Codes will be introduced at Première Vision Paris in September 2019:  

• Downproof, to indicate which fabrics will properly block feathers in quiltings;
• Multilayer, used very often for fabrics for the world of sports performance;
• Washable, for wash-resistant leathers;
• Ultralight, used exclusively for accessory components.

A varied and experiential Sport & Tech universe
A.    A virtual reality experience so visitors can fully immerse themselves in the theme
To offer visitors a live experience, Première Vision has designed a digital animation about the theme of protection. Using virtual reality, it is designed to expose visitors to a variety of environments and external elements (cold, wind, etc.).

B.    Dedicated fashion information
Protection doesn’t preclude creativity and style, in fact quite the opposite is true. This season will be marked by fantasy, with materials combining strong colours, prints, motifs and shine. Visitors will thus find an exclusive and creative Sport & Tech forum, built around the following 4 themes: Tech Tailoring, Ski Touring, Soft Outdoor and Snow Fun. It will bring together samples, components and clothing prototypes.

C.    A comprehensive and high-level conference program to help guide visitors in their choices
This edition, the conferences will be held in very central locations at the show. A space in Hall 3 will host the conferences focusing on innovation, and a space in Hall 6 will be reserved for conferences on fashion trends.

Here are some of the upcoming presentations dedicated to the world of Sport & Tech (Hall 6 conference space) taking place at Première Vision Paris September 2019:

• A conference by Pascal Monfort, founder of the REC trendsmarketing consulting firm, on the theme «The sport & fashion couple: more than ever inseparable!»;
• The presentation of a study on sport and fashion conducted in the French market by Union Sport & Cycle, which assessed the expectations of 12,500 consumers;
• Conferences decoding the fashion trends: « Performance, the challenge in fashion » and «Fashion & Sports major influences and innovations for AW 2021» including exhibitors’ pitchs to present their latest innovations.

Sources : ¹: Euromonitor International, ²: « Union Sport & Cycle » Study

The recently concluded trade fair once again demonstrates: The PERFORMANCE DAYS concept works! At the 19th edition of the trade fair for functional fabrics and sport accessories, new top ratings were achieved in all areas.
Innovation is the specialty at PERFORMANCE DAYS. The functional fabric trade fair has a reputation for being the first to show the newest trends way ahead of the other trade fairs and industry gatherings. The fair offers several unique tools such as the Focus Topic, the PERFORMANCE FORUM with the PERFORMANCE TABLES and the PERFORMANCE WALL, the PERFORMANCE AWARDS, the comprehensive presentation and workshop program as well as the guided tours. What makes this fair so special? Not only the free admission to the fair, but all of the top quality programs are also free of charge! So much commitment to service and trend scouting pays off: The recent trade fair held on November 8-9th, 2017 at the MTC in Munich once again broke all previous records!

Visitor and Exhibitor plus
The halls of the MTC were filled to maximum capacity and recorded significantly more visitors than the previous fair last April and even more than the fair in November 2016. The number of trade visitors rose from 1868 in November 2016, to 2001 breaking the 2000 mark for the first time. This growth corresponds to a 7.1 percent increase. In comparison to the previous year, the number of exhibitors was also greater in autumn 2017, registering a 9.9 percent increase. A total of 177 exhibitors from 23 countries occupied all of the halls to capacity, confirming the decision to relocate to the halls of Messe München, which is scheduled for November 2018. Even now, shortly after opening the exhibitor registration period, demand is already higher than the number of available spaces.

The move to Riem
When the doors of PERFORMANCE DAYS open next year on November 28-29th, 2018, the trade fair will be celebrating not only its 10-year anniversary, but also the first edition of PERFORMANCE DAYS at the new location. In the future, one of the large halls on the exhibition grounds in Munich-Riem will be provided twice a year for functional fabrics. For the debut, it will be located in Hall C1, with easy access via the north-west entrance from the west parking garage.

All highlights also provided online
As usual, when the most recent exhibit comes to a successful close, a special service is made available to all those who did not have enough time: All the highlights and important information like the presentations (also as a podcast!), as well as all the fabrics at the Forum will be available directly at www.performancedays.com. Even more interesting for you: Samples of all featured PERFORMANCE FORUM fabrics can be ordered online, which means direct sourcing of materials is now possible from the comfort of your office.
A special highlight of the past exhibition was the Focus Topic "Thermal Technologies – From Fibre to Smart Textiles." The topic covered the entire spectrum of heat retention and generation in sports clothing, as well as the ECO PERFORMANCE AWARD. The award winner was Pontetorto for the development of the first fleece to be produced with a brushed inside and with particles and fibers that are biodegradable even in sea-water. This innovation was a joint development between Vaude and Lenzing. The workshop presented by Ana Kristiansson about the possibilities of founding a sportswear brand was also very well received.
Besides the familiar exhibitors like Invista, Cocona/37.5, Lenzing, Microban, 3M, bluesign, Burlington, Dyneema, Nilit, Outlast, Pertex, Polartec, Pontetorto, PrimaLoft, Schoeller, Singtex, Sympatex, Südwollle, Toray, and YKK; the Messe welcomed new exhibitors like Freudenberg Performance Materials, Clo Insulation, Flying Textile, Inuheat Group, ISKO ARQUAS, Manifattura Effe Pi, The Woolmark Company, and Tough Knitting Enterprise.

About PERFORMANCE DAYS
PERFORMANCE DAYS — The “functional fabric fair” launched in 2008, is the first and only event created especially for functional fabrics for sports and work clothing. The aim of the semiannual trade fair is to give leading and innovative textile manufacturers, suppliers and service providers the opportunity to present their functional fabrics, membranes plus treatments, laminates, paddings, fin-ishes, and accessories such as yarns, tapes, prints, buttons and zippers.
The industry experts who come to this fair – the sports fashion designers, product managers, and decision-makers (see online: Visitor List) represent almost every European active clothing and func-tional wear manufacturer – can find a complete selection of high quality materials available at just the right time in April/May and November. The dates are intentionally scheduled early thanks to our expertise in functional fabrics and are optimal for summer and winter sport collections. (All trade fair catalogs from past events are available online at Catalogs as well as a listing of current exhibitors at Exhibitor List).
 
The relaxed and focused workshop-like atmosphere at PERFORMANCE DAYS differentiates it from the other fairs which are often unmanageable and more stressful. That is one of the reasons why the Munich trade fair at the heart of the European sportswear industry has become one of the top addresses for new fabrics, innovations, and is the preferred meeting place to conduct business.
In the unique PERFORMANCE FORUM of PERFORMANCE DAYS, the visitor receives an inspiring and well-grounded overview of the new materials, trends, and innovations of the exhibitors. The PERFORMANCE AWARD and the ECO PERFORMANCE AWARD are also presented here. Qualified guest speakers present special topics and their collaborative ventures in guided tours, workshops and presentations to complete the range of information provided at PERFORMANCE DAYS within the Program (see after the fair online in the Presentation Library).
No entry fee and free admission to all events for industry visitors.

Coveted awards for active insulation and sustainable hybrids

The awards presented at PERFORMANCE DAYS are coveted trophies in the world of functional textiles. The winning fabrics or technologies are always truly pioneering innovations. In Fall 2016, the "Oscars of Function" go to Imbotex and Pontetorto.

PERFORMANCE AWARD for the insulation "TWINS" from Imbotex
The Italian company Imbotex is well known for its high quality insulations. The latest generation is called "TWINS" and does not merely hold the warmth, it applies intelligent technology to create heat on demand. This is made possible by the two "faces" of the twin design. The patented, bonded fleece material consists of a lining made from a blend of polyacrylic and polyester that transports moisture quickly away from the skin. On the outside, hydrophobic polypropylene rapidly releases the moisture into the environment. The water vapor formed at the level of "insensible perspiration" is quickly transported to the outside and the body stays dry. During this process, the kinetic energy of the water vapor converts to heat energy and the inner lining of the garment remains pleasantly warm, even in the low temperatures of winter. "TWINS" from Imbotex was the winner of the PERFORMANCE AWARD for this intelligent solution that produces additional warmth and ensures a dry feeling.    

ECO PERFORMANCE AWARD for the hybrid design "ECO HYBRID" from Pontetorto
Engineered hybrids, that is, hybrid solutions that combine multiple zones and fibers in one fabric length are the future of functional clothing. Through such hybrid engineering, sports styles are given the added value of such useful features as thermal retention, climate management, durability, lighter weight, and elasticity; and, all of these at the exact position where it is desirable to have the function. Another advantage of this fabric design is the elimination of irritating seams, which means increased comfort for the wearer. Nevertheless, to manufacture these hybrids requires much experience with jacquard production. The new fabric "ECO HYBRID" introduced by fleece specialist Pontetorto represents not only a sophisticated and highly functional jacquard hybrid with different zones – it is entirely produced with absolutely sustainable methods. The fibers used, in this case polyamide and merino wool, are both quickly degradable and environmentally friendly. The fact that merino wool is degradable is not unusual as it is a natural product. The special aspect of this concept is the polyamide fiber used exclusively by Pontetorto, which is fully degradable within three years! For so much "green" innovation, Pontetorto was selected as the winner of the ECO PERFORMANCE AWARD.
 
All of the newest trends for Winter 2018/19 and our FOCUS TOPIC are on display on November 16-17, 2016 at PERFORMANCE DAYS in the Munich MTC. For all those who cannot wait, a lot of information is already provided for you online at: https://www.performancedays.com

About PERFORMANCE DAYS
PERFORMANCE DAYS — The “functional fabric fair” launched in 2008, is the first and only event created especially for functional fabrics for sports and work clothing. The aim of the semi-annual trade fair is to give leading and innovative textile manufacturers, suppliers and service providers the opportunity to present their functional fabrics, membranes plus treatments, laminates, paddings, finishes, and accessories such as yarns, tapes, prints, buttons and zippers.
No entry fee and free admission to all events for industry visitors.
Detailed information and advanced registration online at: www.performancedays.com