From the Sector

from to
Reset
17 results
Winners of AVK Innovation Award 2023 (c) AVK
Winners of AVK Innovation Award 2023
25.10.2023

Winners of AVK Innovation Award 2023

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

Third place: “High Performance Recycled Carbon Fibre Materials (HiPeR)” – Composites Technology Center GmbH (CTC GmbH), partners: Faserinstitut Bremen e. V, Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; partners Japan: Faserinstitut Bremen e.V., Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; Partner Japan: CFRI Carbon Fiber Recycle Industry Co., Ltd., IHI Logistics and Machinery Corporation, ICC Kanazawa Institute of Technology

Innovative Processes & Methods category
First place: “Chopped Fibre Direct Processing (CFP)” – KraussMaffei Technologies GmbH, partner: Wirthwein SE

Second place: “CIRC - Complete Inhouse Recycling of Thermoplastic Compounds” – Fraunhofer Institute for Production Engineering and Automation (IPA), partners: Schindler Handhabetechnik GmbH, Vision & Control GmbH

Third place: “CarboScreen – Sensor-Based Monitoring of Carbon-Fibre Production” – CarboScreen GmbH, partner: Institute of Textile Technology at RWTH Aachen University

Research & Science category
First place: “Development of a Stereocomplex PLA Blend on a Pilot Plant Scale” – Faserinstitut Bremen e. V.

Second place: “Fibre-Reinforced Salt as a Robust Lost Core Material” – Technical University of Munich, Chair of Carbon Composites, partners: Apppex GmbH, Haas Metallguss GmbH

Third place: “VliesSMC – Recycled Carbon Fibres with a Second Life in the SMC Process” – Sächsisches Textilforschungsinstitut e.V. (STFI), partner: Fraunhofer Institute for Chemical Technology (ICT)

 

Entries for the next Innovation Award 2024 can be submitted from January 2024 onwards.

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V.

Photo: AVK
26.05.2023

AVK: Successful Flame Retardancy Conference in Berlin

  • Flame Retardancy for Composites Applications in the Transport Sector

On 10-11 May 2023, the AVK - Industrievereinigung Verstärkte Kunststoffe e. V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V. in Berlin organised for the first time an international, English-language conference on flame retardancy.

In 18 compact lectures, more than 20 experts informed nearly 80 participants about new developments, requirements and innovations regarding specific flame retardant properties of components made of fibre-reinforced plastics/composites for the transport sector.

Among others, there were presentations by industry representatives from Saertex, BÜFA, Clariant, Diehl Aviation and Airbus, but also from institutes such as the Fraunhofer Institutes or the Federal Institute for Materials Research and Testing. Presentations on the topics of standardisation, raw materials, automotive or recycling were on the agenda, but also flame retardants for connectors and battery housings for electric vehicles or fire-retardant systems for rail vehicles or fire-retardant CFRP made from recycled CF nonwoven were presented.

  • Flame Retardancy for Composites Applications in the Transport Sector

On 10-11 May 2023, the AVK - Industrievereinigung Verstärkte Kunststoffe e. V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V. in Berlin organised for the first time an international, English-language conference on flame retardancy.

In 18 compact lectures, more than 20 experts informed nearly 80 participants about new developments, requirements and innovations regarding specific flame retardant properties of components made of fibre-reinforced plastics/composites for the transport sector.

Among others, there were presentations by industry representatives from Saertex, BÜFA, Clariant, Diehl Aviation and Airbus, but also from institutes such as the Fraunhofer Institutes or the Federal Institute for Materials Research and Testing. Presentations on the topics of standardisation, raw materials, automotive or recycling were on the agenda, but also flame retardants for connectors and battery housings for electric vehicles or fire-retardant systems for rail vehicles or fire-retardant CFRP made from recycled CF nonwoven were presented.

More information:
AVK Composites flame retardant
Source:

AVK

(c) Fraunhofer ICT
06.01.2023

Fraunhofer CPM develop programmable material for ergonomic lying position

Many people across the world are bedridden – be it due to illness, an accident or old age. Because those affected often cannot move or turn over by themselves, they often end up with very painful bedsores. In the future, it should be possible to avoid bedsores with the help of materials that can be programmed to entirely adapt their form and mechanical properties. For example, the body support of mattresses made from programmable materials can be adjusted in any given area at the push of a button. Furthermore, the support layer is formed in such a way that strong pressure on one point can be distributed across a wider area. Areas of the bed where pressure is placed are automatically made softer and more elastic. Caregivers can also adjust the ergonomic lying position to best fit their patient.

Many people across the world are bedridden – be it due to illness, an accident or old age. Because those affected often cannot move or turn over by themselves, they often end up with very painful bedsores. In the future, it should be possible to avoid bedsores with the help of materials that can be programmed to entirely adapt their form and mechanical properties. For example, the body support of mattresses made from programmable materials can be adjusted in any given area at the push of a button. Furthermore, the support layer is formed in such a way that strong pressure on one point can be distributed across a wider area. Areas of the bed where pressure is placed are automatically made softer and more elastic. Caregivers can also adjust the ergonomic lying position to best fit their patient.

Materials and microstructuring
Materials for applications requiring specific changes to stiffness or shape are being developed by researchers from Fraunhofer CPM, which is formed of six core institutes with the aim of designing and producing programmable materials. So, how can we program materials? “Essentially, there are two key areas where adjustments can be made: the base material – thermoplastic polymers in the case of mattresses and metallic alloys for other applications, including shape memory alloys – and, more specifically, the microstructure,” explains Dr. Heiko Andrä, spokesperson on the topic at the Fraunhofer Institute for Industrial Mathematics ITWM, one of the Fraunhofer CPM core institutes. “The microstructure of these metamaterials is made up of unit cells that consist of structural elements such as small beams and thin shells.” While the size of each unit cell and its structural elements in conventional cellular materials, like foams, vary randomly, the cells in the programmable materials are also variable – but can be precisely defined, i.e., programmed. This programming can be made, for example, in such a way that pressure on a particular position will result in specific changes at other regions of the mattress, i.e., increase the size of the contact surface and provide optimal support to certain areas of the body.

Materials can also react to temperature or humidity
The change in shape that the material should exhibit and the stimuli to which it reacts - mechanical stress, heat, moisture or even an electric or magnetic field - can be determined by the choice of material and its microstructure.

The journey to application
A single piece of material can take the place of entire systems of sensors, regulators and actuators. The goal of Fraunhofer CPM is to reduce the complexity of systems by integrating their functionalities into the material and reducing material diversity. We always have industrial products in mind when developing the programmable materials. As such, we take mass production processes and material fatigue into account, among other things,” says Franziska Wenz, deputy spokesperson on the topic at the Fraunhofer Institute for Mechanics of Materials IWM, another core institute of Fraunhofer CPM. The initial pilot projects with industry partners are also already underway. The research team expects that initially, programmable materials will act as replacements for components in existing systems or be used in special applications such as medical mattresses, comfortable chairs, variable damping shoe soles and protective clothing. “Gradually, the proportion of programmable materials used will increase,” says Andrä. Ultimately, they can be used everywhere – from medicine and sporting goods to soft robotics and even space research.

Source:

Fraunhofer ITWM

Photo: Messe Düsseldorf, Constanze Tillmann
21.12.2022

WearRAcon Europe Conference to be held at A+A 2023

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Being able to walk again despite a serious injury, handle heavy parts without outside help or simply do overhead work comfortably and for extended periods of time - the advantages of exoskeletons have already convinced numerous industries. Exoskeletons and wearables are now already being used successfully in industry and commerce, and major machine builders and automakers as well as the medical sector are continuing to experiment with man-machine connections. Currently, the global market volume for exoskeletons is valued by leading analysts at over US$20 billion by 2030.1

The WearRAcon Europe Conference 2023 will provide new insights into the promising world of exoskeleton systems from different perspectives and, in conjunction with the A+A Congress, set future-oriented impulses. Lectures by renowned exoskeleton pioneers combined with testimonials presented by users from a variety of industries and keynotes by experts will round off the programme. And, like at the previous A+A, a Self-Experience Space will again be set up so that the exoskeleton systems of various manufacturers can be tested in realistic work scenarios.

In parallel with the Self-Experience Space, the large live study Exoworkathlon will also take place again. Trainees from various mechatronic training courses have to complete a concourse and perform holding, lifting and assembling tasks, which have been specially developed with the industry. Data is prospectively collected with different measuring sensors to measure the effects of exoskeletons. In the Exoworkathlon, the IPA focuses especially on prevention for young employees in order to raise awareness of the issue and counteract ailments at an early stage.

1 (Interview Trans.INFO mit Armin G. Schmidt, CEO von German Bionic (01/2021).

Source:

Messe Düsseldorf GmbH

(c) Fraunhofer CCPE
19.09.2022

Fraunhofer CCPE on the way to an international circular plastics economy

More than 350 million tons of plastic are produced worldwide every year, and vast amounts of plastic waste simply end up in the environment. The circular economy offers enormous potential for keeping plastics in the loop and thus conserving resources and the environment. Since 2018, six Fraunhofer institutes in the Fraunhofer CCPE cluster have been researching how to make the plastics value chain circular, and Prof. Manfred Renner has been the new head of the cluster since August 2022. Research results, implementation projects and strategies to accelerate the transformation to a circular plastics economy will be presented by Fraunhofer CCPE at the first international Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich.

More than 350 million tons of plastic are produced worldwide every year, and vast amounts of plastic waste simply end up in the environment. The circular economy offers enormous potential for keeping plastics in the loop and thus conserving resources and the environment. Since 2018, six Fraunhofer institutes in the Fraunhofer CCPE cluster have been researching how to make the plastics value chain circular, and Prof. Manfred Renner has been the new head of the cluster since August 2022. Research results, implementation projects and strategies to accelerate the transformation to a circular plastics economy will be presented by Fraunhofer CCPE at the first international Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich.

In a circular plastics economy, resources can be saved, products can be intelligently designed for long service life, and end-of-life losses can be reduced. Systemic, technical and social innovations are needed to make the transition from a linear to a circular economy a success. This is what the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE is researching in the three divisions “Materials”, “Systems” and “Business”. The cooperation of the six Fraunhofer institutes IAP, ICT, IML, IVV, LBF and UMSICHT enables a multi-stakeholder approach in which the appropriate R&D competencies are bundled.

Fraunhofer CCPE would like to present and discuss successful projects and research approaches on an international scale at the Fraunhofer CCPE Summit on February 8 and 9, 2023 in Munich. The summit is to become an international forum for exchanging ideas for solutions and innovations for a circular plastics economy.

Cross-industry collaboration - local, regional and international
Since August 2022, Prof. Manfred Renner, Institute Director of Fraunhofer UMSICHT, is the new head of Fraunhofer CCPE. He succeeds Prof. Eckhard Weidner, who has retired. “Cross-industry cooperation - very local, but also regional and international - is the elementary prerequisite for a functioning circular plastics economy. At the summit, players from all points of the compass will meet and network in order to rethink the plastics value chain together," explains Prof. Manfred Renner, adding, “We want to provide answers to the following questions:  How can we make all Circular Economy principles, i.e. the ten R-strategies, known? How can industry, science and society best cooperate in a transformation to a circular plastics economy for the greatest possible impact?”

Results of the Fraunhofer CCPE cluster so far are innovative approaches for circular business models, intelligent collection, sorting, and recycling technologies, but also new formulations for circular polymers and compounds to enable multiple recycling cycles. With the newly developed assessment tool CRL® , companies can, for example, self-assess the maturity of products or product systems with regard to the circular economy. The tool checks the extent to which a product already takes into account circular economy principles in the areas of product design, product service system, end-of-life management and circular economy, and where there is still potential for improvement.

Source:

Fraunhofer UMSICHT

(c) Fraunhofer UMSICHT/Mike Henning
Prof. Christian Doetsch (l.) and Prof. Manfred Renner (r.)
09.08.2022

Fraunhofer UMSICHT: New institute directors

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner and Prof. Christian Doetsch will take joint leadership of the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT from August 2022. As renowned scientists, they have most recently shaped the direction of the institute as heads of the Products division and Energy division respectively, and will now follow in the footsteps of Prof. Eckhard Weidner, who has entered retirement.

This is the first time in its history that Fraunhofer UMSICHT is led by two directors. Both institute directors began their professional careers at the institute and from August they will have a joint hand in its future.

Prof. Manfred Renner holds a doctorate in mechanical engineering, specializing in process engineering and business development. Since 2006, he has held various roles at Fraunhofer UMSICHT, most recently heading up the Products division and overseeing its 126 employees and its budget of 14.8 million euros. He has set international standards through his award-winning research into a free of water tanning leather tanning process that uses compressed carbon dioxide. With the development of innovative aerogel-based insulation materials for building facades, he has made a significant contribution to environmentally friendly, circular applications in the construction industry and initiated a number of industrial projects. One of the notable technological breakthroughs made by his team was the development of a new type of fire-resistant glass, which can withstand even the most extreme heat. This won his development team the Joseph von Fraunhofer Prize in October 2020.

Alongside becoming institute director, Prof. Renner will also take over the leadership of the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE in August 2022. In this role, he will represent the Fraunhofer-Gesellschaft on a national and international level with regard to the transformation of industry and society to a circular economy. In addition, he will start his professorship in Responsible Process Engineering at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. Over the course of his professorship, he will shape the systemic development of the circular economy at a corporate, regional and European level.

Prof. Christian Doetsch has worked in energy research for more than 25 years, spending most of this time at Fraunhofer UMSICHT. As head of the Energy division, he managed a team of around 145 employees and was responsible for a budget of approximately 10.4 million euros. His technological focal points are energy storage, Power-to-X technologies including hydrogen electrolysis and chemical conversion, catalysts, and energy system modeling and optimization. His overarching aim is the integration of renewable energies into a cross-sectoral, resilient energy system.

In 2015, Doetsch co-founded the award-winning start-up Volterion GmbH & Co. KG, which develops redox flow batteries. He attained high visibility on a global scale by redesigning stacks, one of the main components of redox flow batteries, an achievement for which he, his team and Volterion representatives were awarded the Joseph von Fraunhofer Prize in May 2021. The energy expert also acts as deputy spokesperson for the Fraunhofer Energy Alliance and task manager for the energy storage group at the International Energy Agency (IEA). He also co-founded the “Open District Hub e. V.,” an association that promotes the energy transition in the sector by means of energy systems integration.

Since January 2020, he has been Professor of Cross Energy Systems at the Faculty of Mechanical Engineering of the Ruhr-Universität Bochum. In this role, he conducts research into ecological evaluation and resilience of cross-sectoral energy systems.

Source:

Fraunhofer UMSICHT

(c) MWIDE NRW
02.06.2022

Fraunhofer UMSICHT: Marktfähige Power-to-X-Technologien entwickeln

Im Rahmen eines neuen Projektes des Spitzenclusters Industrielle Innovationen (SPIN) entsteht eine offene Versuchsplattform für die Entwicklung von Power-to-X-Technologien. Untersucht werden dabei Möglichkeiten, CO2-haltige Abgasströme zunächst in ein Synthesegas aus Kohlenmonoxid und Wasserstoff und dann in verschiedene Produkte für die Chemie-, Kraftstoff- und Kunststoffindustrie umzuwandeln. Die nordrhein-westfälische Landesregierung fördert dieses Vorhaben mit 5,3 Mio. Euro.

Im Rahmen eines neuen Projektes des Spitzenclusters Industrielle Innovationen (SPIN) entsteht eine offene Versuchsplattform für die Entwicklung von Power-to-X-Technologien. Untersucht werden dabei Möglichkeiten, CO2-haltige Abgasströme zunächst in ein Synthesegas aus Kohlenmonoxid und Wasserstoff und dann in verschiedene Produkte für die Chemie-, Kraftstoff- und Kunststoffindustrie umzuwandeln. Die nordrhein-westfälische Landesregierung fördert dieses Vorhaben mit 5,3 Mio. Euro.

Die Federführung des Projektes »PtX-Plattform« liegt bei der Mitsubishi Power Europe GmbH. Gemeinsam mit SPIN sowie den Projektpartnern – dem Fraunhofer UMSICHT, dem Lehrstuhl für Umweltverfahrenstechnik und Anlagentechnik (LUAT) der Universität Duisburg-Essen sowie Evonik Industries – will das Unternehmen marktfähige Lösungen für die effiziente Nutzung überschüssigen Stroms entwickeln. Ein Schwerpunkt werden dabei Wasserstoff- sowie Carbon-Capture-Use-and-Storage-Technologien sein: CCU und CCS. Entsprechende containerbasierte Anlagen entstehen auf dem Gelände des LUAT. Sie umfassen u.a. CO2-Abtrennung und katalytische Co-Elektrolyse und stellen alle notwendigen Energie- und Stoffströme zur Verfügung.

Elektrolytische Herstellung von Synthesegas
Das Fraunhofer UMSICHT erarbeitet im Zuge des Projektes u.a. Grundlagen, um in einem Power-to-X-Reaktor die elektrolytische Herstellung von Synthesegas im Labormaßstab zu demonstrieren. »Dazu skalieren wir neuartige Gasdiffusionselektroden und setzen sie für die Aufgabe in angepassten Reaktoren ein«, erklärt Prof. Dr. Ulf-Peter Apfel, Leiter der Abteilung Elektrosynthese. »Weitere Komponenten der Elektrolysezellen werden so aufeinander abgestimmt, dass Verlustleistungen und Gasleckagen minimiert sowie die Zusammensetzung des Synthesegases möglichst kontrolliert variiert werden können.« Neben der Erstellung der erforderlichen Komponenten führt das Institut auch die Entwicklung, Errichtung und Inbetriebnahme eines skalierten Elektrolysesystems (inkl. der Teststandperipherie) durch und integriert alles in die Containerumgebung der Plattform.

Charakterisierung von Katalysatoren
Darüber hinaus testen die Wissenschaftlerinnen und Wissenschaftler des Fraunhofer UMSICHT Katalysator-Systeme, die neu von Evonik entwickelt worden sind und bei der Synthese von Alkoholen zum Einsatz kommen. »Wir schauen uns Umsatz, Menge und Konzentration sowohl der auftretenden Produkte als auch der Nebenprodukte an und haben dabei vor allem die Lebensdauer des Katalysators im Blick«, so Prof. Apfel. »Auf Basis unserer Testergebnisse nimmt Evonik dann weitere Optimierungen der Katalysatoren sowie deren Scale-up in Angriff.« Das beste System wird dann für den Pilotreaktor ausgewählt.

Die Bedeutung des Projektes hob Prof. Dr. Andreas Pinkwart bei der Übergabe des Förderbescheids hervor. »Die aktuellen Ereignisse zeigen einmal mehr, wie wichtig eine sichere und unabhängige Energieversorgung ist«, betonte der NRW-Minister für Wirtschaft, Innovation, Digitalisierung und Energie. »Eine zukunfts- und wettbewerbsfähige Industrie benötigt große Energiemengen und klimaneutral erzeugte Rohstoffe für ihre Produktionsprozesse. Power-to-X kann nicht nur dazu beitragen, dass wir unsere ehrgeizigen Klimaschutzziele erreichen, sondern auch zu einer unabhängigen Versorgung mit synthetischen Kraftstoffen und Chemikalien für unsere Industrie und unser Energiesystem der Zukunft.«

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

31.05.2022

Fraunhofer UMSICHT: Grüner Wasserstoff aus einer Hand

Von der Komponentenentwicklung für Elektrolyse und Brennstoffzellen über die Erstellung von Konzepten zu Speicherung und Transport bis zur Implementierung sektorenübergreifender Ansätze: Forschende des Fraunhofer UMSICHT liefern aus einer Hand Lösungen zur Bereitstellung und Nutzung von Wasserstoff. Wer Einblicke in Kompetenzen und Dienstleistungen des Instituts gewinnen möchte ist herzlich zu Gesprächen auf der E-world 2022 eingeladen. Das Fraunhofer UMSICHT ist am Gemeinschaftsstand des Landes Nordrhein-Westfalen zu finden.

Von der Komponentenentwicklung für Elektrolyse und Brennstoffzellen über die Erstellung von Konzepten zu Speicherung und Transport bis zur Implementierung sektorenübergreifender Ansätze: Forschende des Fraunhofer UMSICHT liefern aus einer Hand Lösungen zur Bereitstellung und Nutzung von Wasserstoff. Wer Einblicke in Kompetenzen und Dienstleistungen des Instituts gewinnen möchte ist herzlich zu Gesprächen auf der E-world 2022 eingeladen. Das Fraunhofer UMSICHT ist am Gemeinschaftsstand des Landes Nordrhein-Westfalen zu finden.

Dort stellen Wissenschaftler*innen u.a. das Konzept eines ohmschen Reaktors vor. Seine Aufgabe: die dezentrale und flexible Bereitstellung von Wasserstoff durch die Zersetzung von Ammoniak. Das Besondere: Die Forschenden bringen die Wärme nicht von außen ein, sondern – mittels Strom – direkt in den speziell hierfür entwickelten Katalysator. »Dadurch können wir bei deutlich geringeren Temperaturen arbeiten und haben nicht diese große Überschuss-Energie. Konkret versprechen wir uns von diesem Verfahren, dass es die Effizienz bereits existierender Prozesse um wenigstens 20 Prozent verbessert«, so Dr. Andreas Menne, Leiter der Abteilung Low Carbon Technologies.

Darüber hinaus haben Messebesucher*innen Gelegenheit, den DYNAFLEX®-Check kennenzulernen. »Der DYNAFLEX®-Check ist ein Tool zur Selbsteinschätzung, das wir gerade entwickeln. Mit seiner Hilfe können kleine und mittelständische Unternehmen aus dem produzierenden Gewerbe ihre Bedarfe und Herausforderungen im Bereich Sektorenkopplung identifizieren«, erklärt Dr. Esther Stahl, Leiterin der Abteilung Strategische Projekte.

Dass und wie sich solche Ansätze durch cross-industrielle Netzwerke realisieren lassen, ist ebenfalls Thema auf der E-world: UMSICHT-Forschende stellen Projekte und Initiativen vor, bei denen auf regionaler Ebene dezentrale systemische Lösungen erarbeitet und umgesetzt werden. Beispielsweise das Leistungszentrum DYNAFLEX®, welches flexible Lösungen für die Energie- und Rohstoffwende entwickelt sowie in Wirtschaft und Gesellschaft transferiert.

Source:

Fraunhofer UMSICHT

Fraunhofer: Kommunikationsadapter für Gesichtsmasken (c) Fraunhofer UMSICHT/Hasan-Tunc Dimetokali
24.05.2022

Fraunhofer: Kommunikationsadapter für Gesichtsmasken

Medizinische Masken sind in der Pandemie zum Alltag geworden. Mit ihrem erhöhten Virenschutz gehen allerdings auch Verständigungsprobleme einher. Forschende des Fraunhofer UMSICHT haben für dieses Problem einen Kommunikationsadapter entwickelt, der die Stimme verstärkt und so das Gespräch erleichtert. Nun ist die Erfindung unter dem Namen maskAMP® geschützt und ein Patent erteilt.

Comedians, Sänger*innen und Politiker*innen – sobald Menschen auf einer Bühne sprechen, greifen sie fast schon selbstverständlich zum Mikrofon. In unserem Alltag dagegen verstehen wir uns normalerweise ohne Hilfsmittel. Mit Pandemie und Gesichtsmasken finden wir Verständigungsprobleme allerdings auch in alltäglichen Situationen wieder. Nicht ohne Grund erklingt am Empfang in der Arztpraxis oder an der Supermarktkasse immer öfter ein »Wie bitte?«. Das Fraunhofer IBP hat herausgefunden, dass die Masken 5 bis 15 Dezibel der Lautstärke schlucken. Somit fühlt sich die Entfernung zum Gegenüber mit Masken doppelt so groß an, wie sie tatsächlich ist.[1]

Medizinische Masken sind in der Pandemie zum Alltag geworden. Mit ihrem erhöhten Virenschutz gehen allerdings auch Verständigungsprobleme einher. Forschende des Fraunhofer UMSICHT haben für dieses Problem einen Kommunikationsadapter entwickelt, der die Stimme verstärkt und so das Gespräch erleichtert. Nun ist die Erfindung unter dem Namen maskAMP® geschützt und ein Patent erteilt.

Comedians, Sänger*innen und Politiker*innen – sobald Menschen auf einer Bühne sprechen, greifen sie fast schon selbstverständlich zum Mikrofon. In unserem Alltag dagegen verstehen wir uns normalerweise ohne Hilfsmittel. Mit Pandemie und Gesichtsmasken finden wir Verständigungsprobleme allerdings auch in alltäglichen Situationen wieder. Nicht ohne Grund erklingt am Empfang in der Arztpraxis oder an der Supermarktkasse immer öfter ein »Wie bitte?«. Das Fraunhofer IBP hat herausgefunden, dass die Masken 5 bis 15 Dezibel der Lautstärke schlucken. Somit fühlt sich die Entfernung zum Gegenüber mit Masken doppelt so groß an, wie sie tatsächlich ist.[1]

»Im Alltag gleichen Menschen diese maskenbedingten Verständigungsprobleme mit einer lauteren Stimmgebung aus«, erklärt Melih-Ahmet Dimetokali, Mitarbeiter in der IT-Infrastruktur des Fraunhofer UMSICHT. »Das belastet allerdings die Stimmlippen und auch eine physiologische Stimmgebung funktioniert dann zum Teil nicht mehr.« Verstärkt wird das Problem gleichzeitig durch Mindestabstände und schalldämpfende Glasscheiben. Die Resonanz ist so noch stärker eingeschränkt und die Artikulation gehemmt. Wie das Fraunhofer IBP herausgefunden hat, machen sich dadurch auf längere Zeit Erschöpfungssymptome wie Heiserkeit, Halsschmerzen, aber auch Kopfschmerzen und Abgeschlagenheit bemerkbar.

Mit Kommunikationsadaptern wieder mehr verstehen können
Das UMSICHT-Forscherteam – bestehend aus Melih-Ahmet Dimetokali, Michael Joemann und Rasit Özgüc – hat als Lösung einen abnehmbaren Adapter entwickelt, der die Stimme verstärkt und so Gesprächssituationen erleichtert. »Anders als bei Konkurrenzprodukten mindert der leichte Adapter nicht den angenehmen Tragekomfort der Maske«, betont Rasit Özgüc aus der Abteilung Elektrochemische Energiespeicher. »Uns war bei der Entwicklung sehr wichtig, dass der Verstärker alltagstauglich ist. Denn auch wenn die allgemeine Maskenpflicht derzeit weggefallen ist, gibt es Personenkreise, die Gesichtsmasken auch vor und nach der Pandemie regelmäßig tragen müssen. In medizinischen und pflegerischen Einrichtungen (Arztpraxen, Krankenhäuser, Pflegeheime etc.) beispielsweise bleibt die Maskenpflicht bestehen, um ältere und vorerkrankte Menschen besonders zu schützen. Allein in Deutschland arbeiten an die 3,3 Mio. Menschen im öffentlichen Gesundheitswesen.«

Ein weiterer Vorteil des Verstärkers ist seine Wiederverwendbarkeit. Da er flexibel positionierbar und abnehmbar ist, kann er bei einem Wechsel der Gesichtsmaske auf ein neues Modell übertragen werden. Nutzende können den Adapter so einfach reinigen oder wieder aufladen. »Das macht ihn im Vergleich bereits erhältlicher Produkten auf dem Markt umwelt- und ressourcenschonend. Dort ist die Elektronik nämlich meistens fest in der Maske integriert«, erklärt Özgüc, »Trotzdem können wir mit geringen Materialkosten und ohne Mindestproduktionsmenge der steigenden Nachfrage gerecht werden.«

Erstes Patent für einen Kommunikationsadapter
Für maskAMP® haben die UMSICHT-Forschenden nun einen Patentschutz für Deutschland erlangt, welcher jetzt in die weltweite Anmeldung überführt wird.  Das Produkt umfasst zum einen den wiederverwendbaren Kommunikationsadapter für Gesichtsmasken und zum anderen das System aus Kommunikationsadapter und Gesichtsmaske. Auch das Verfahren zur Bereitstellung eines solchen Systems fällt unter den Namen. Damit ist maskAMP® der erste patentierte Kommunikationsadapter.

Entwicklung vom Prototyp zur Marktreife
»Bis es den Kommunikationsadapter zu kaufen gibt, wird es allerdings noch etwas dauern«, ergänzt Michael Joemann, einer der Miterfinder. »Unser System muss zur Marktreife entwickelt werden. Dafür suchen wir lizenznehmende Vertragspartner mit den entsprechenden technologischen Möglichkeiten und Vertriebskanälen. Interessierte wenden sich bitte unter dem Stichwort maskAMP® an Rasit Özgüc.

[1] Fraunhofer »Das Magazin« Ausgabe 4.20, Seite 30-31.

Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
CCU-2022 Award-Nominees
14.03.2022

“Best CO2 Utilisation 2022” Award Nominees

  • Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
  • Conference on CO2-based Fuels and Chemicals 2022 – Cologne (Germany) and online, hybrid conference, 23-24 March 2022

Carbon Capture and Utilisation (CCU) Innovations of the Year 2022: A lot of technologies are in place and in development to face the challenges of a sustainable chemicals and fuels production based on the utilisation of captured CO2 from industrial off-gases or directly from the atmosphere. To honor these, nova-Institute grants its annual award, “Best CO2 Utilisation”, within the framework of the “Conference on CO2-based Fuels and Chemicals” taking place in Cologne on 23-24 March 2022. Great submissions reached the nova-Institute and six nominees now get the chance to demonstrate their full potential to a wide audience in Cologne (Germany) and online.

Here are the six nominees:

  • Six Carbon Capture and Utilisation technologies for a sustainable chemical and fuel production nominated for the innovation award “Best CO2 Utilisation 2022”
  • Conference on CO2-based Fuels and Chemicals 2022 – Cologne (Germany) and online, hybrid conference, 23-24 March 2022

Carbon Capture and Utilisation (CCU) Innovations of the Year 2022: A lot of technologies are in place and in development to face the challenges of a sustainable chemicals and fuels production based on the utilisation of captured CO2 from industrial off-gases or directly from the atmosphere. To honor these, nova-Institute grants its annual award, “Best CO2 Utilisation”, within the framework of the “Conference on CO2-based Fuels and Chemicals” taking place in Cologne on 23-24 March 2022. Great submissions reached the nova-Institute and six nominees now get the chance to demonstrate their full potential to a wide audience in Cologne (Germany) and online.

Here are the six nominees:

  • Acies Bio (SI) – OneCarbonBio
  • Air Company (US) – Air Eau de Parfum
  • Avecom (BE) – Power To Protein
  • CleanO2 Carbon Capture Technologies (CA) – CleanO2 Soap
  • Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB (DE) – eBioCO2n Technology
  • Nordic Electrofuel (NO) – E-Fuel 1
18.10.2021

SABIC presents new Portfolio for Nonwovens at INDEX

SABIC has announced that the newly formed Hygiene & Healthcare segment of its Petrochemicals business will showcase its extensive portfolio of SABIC PURECARES™ polypropylene (PP) and polyethylene (PE) polymers for high-purity nonwovens and hygiene films at the upcoming INDEX™ Expo in Geneva, Switzerland, from October 19 through 22, 2021. The company will also present enabling solutions developed with partners to address the issue of plastic waste and support the transformation of the industry towards a circular economy with closed-loop initiatives and certified circular polymers under its TRUCIRCLE™ portfolio and services.

SABIC has announced that the newly formed Hygiene & Healthcare segment of its Petrochemicals business will showcase its extensive portfolio of SABIC PURECARES™ polypropylene (PP) and polyethylene (PE) polymers for high-purity nonwovens and hygiene films at the upcoming INDEX™ Expo in Geneva, Switzerland, from October 19 through 22, 2021. The company will also present enabling solutions developed with partners to address the issue of plastic waste and support the transformation of the industry towards a circular economy with closed-loop initiatives and certified circular polymers under its TRUCIRCLE™ portfolio and services.

During INDEX, SABIC will exhibit a wide range of PP polymers targeted at these needs. Highlights on display will include dedicated PP and PE grades for lightweight nonwoven fabrics using the latest spunbond and meltblown processes, and a new ultra-high melt flow PP product engineered for meltblown fibers in nonwoven fabrics. The nonwoven focus will be complemented by industry proven polyolefins for cast and blown film applications in hygiene webs and laminates, providing desirable back and top sheet properties such as water tightness, breathability and elasticity.

In addition, SABIC will also present ISCC Plus certified fiber and film polymers based on circular and renewable PP and PE polymer technology as part of the company’s TRUCIRCLE portfolio for advancing the transformation of the plastics industry from a linear to a truly circular economy. Examples of this comprehensive initiative include collaborations with various market leaders in the field. Together with Fibertex Personal Care, one of the world’s largest manufacturers of spunbond nonwovens for the hygiene industry, SABIC is creating a range of high-purity nonwovens for the hygiene market using ISCC PLUS certified circular PP polymer derived from post-consumer plastic waste. In another project, Fraunhofer Institute, SABIC and Procter & Gamble (P&G) joined forces to develop and demonstrate the feasibility of an advanced close-loop recycling process for used nonwoven facemasks.

Source:

SABIC / Marketing Solutions NV

Recycling secures raw materials for a climate-neutral Europe © ALBA Group
Newly published: the studie “resources SAVED by recycling”.
06.10.2021

Recycling secures raw materials for a climate-neutral Europe

Recycling is the key factor in achieving the EU climate targets. This is shown by the results of the "resources SAVED by recycling" study published today, which Fraunhofer UMSICHT prepared on behalf of the ALBA Group, one of the ten leading recycling companies worldwide. According to the study, 3.5 million tons of greenhouse gas emissions and 28.8 million tons of primary resources could be saved in 2020 alone. Further potential could be raised, for example, through minimum quotas for the use of recycled raw materials.

Recycling is the key factor in achieving the EU climate targets. This is shown by the results of the "resources SAVED by recycling" study published today, which Fraunhofer UMSICHT prepared on behalf of the ALBA Group, one of the ten leading recycling companies worldwide. According to the study, 3.5 million tons of greenhouse gas emissions and 28.8 million tons of primary resources could be saved in 2020 alone. Further potential could be raised, for example, through minimum quotas for the use of recycled raw materials.

“Fit for 55” thanks to the circular economy: the recycling of raw materials leads to a systematic reduction in the greenhouse gas emissions of our civilisation – and can therefore make a key contribution to achieving the EU climate goals. This is the outcome of the “resources SAVED by recycling” study presented today, which the Fraunhofer Institute for Environmental, Safety and Energy Technology UMSICHT prepared on behalf of the ALBA Group. Thanks to the closed-loop circulation of 4.8 million tonnes of recyclable materials, the ALBA Group succeeded in preventing some 3.5 million tonnes of climate-damaging greenhouse gas emissions in the year 2020 alone. This amount is equivalent to the emissions from some five million return flights between Frankfurt am Main and Mallorca. At the same time, recycling also secures valuable raw materials for the industry: in 2020, in comparison with primary production, recycling saved 28.8 million tonnes of resources, such as crude oil and iron ore.

“The circular economy is one of the strongest pace-setters on the journey to achieving climate neutrality,” highlights Dr. Axel Schweitzer, CEO of the ALBA Group. “We will only achieve the goal of reducing greenhouse gas emissions by at least 55 per cent throughout Europe by 2030 if we make consistent use of recycled raw materials.” This includes the area of plastics, for example: compared with primary plastics made from crude oil, the use of high-quality recycled plastics achieves a reduction of greenhouse gas emissions of more than 50 per cent. “It is now necessary to lever this potential,” explains Schweitzer. “We are expecting the new Federal Government in Germany to act decisively and push ahead directly with the transition to a circular economy. The environmental benefits of recycling due to its clearly superior CO2 balance should also find reflection in prices. As immediate climate protection measures, clear industry standards for recyclates combined with minimum quotas on the use of recycled raw materials in products and packaging are also urgently necessary. Last but not least, the state sector is also called upon to prioritise resource protection in the area of procurement. Sustainable procurement can ultimately provide a significant boost to the circular economy”.

Plastics, metals, waste electrical (and electronic) equipment, wood, paper, cardboard, cartons or glass: the Fraunhofer UMSICHT has now been researching the specific benefits of recycling for 14 years. Detailed comparisons have also been made of the primary processes and recycling processes for the various material flows. “This means we can precisely quantify the extent to which the recycling activities of the ALBA Group can contribute to reducing the burden on the environment,” explains Dr.-Ing. Markus Hiebel, Director of the Department for Sustainability and Participation at Fraunhofer UMSICHT. Hiebel believes that the greatest savings can be achieved if the entire value chain is aligned consistently with the circular principle: “The transformation towards a genuine circular economy requires completely new thinking. Products should be designed and managed to ensure that they contain recycled raw materials right from the start – which enables them to be recycled appropriately.”

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

 

Fraunhofer UMSICHT: Bionische Mikroplastikfilter in Waschmaschinen (c) Jan Hagenmeyer/Uni Bonn
06.10.2021

Fraunhofer UMSICHT: Bionische Mikroplastikfilter in Waschmaschinen

In der Waschmaschine wird nicht nur die Wäsche sauber. Durch den Abrieb von Synthetikfasern gelangen mit dem Abwasser auch winzige Kunststoffpartikel in die Umwelt. Biologinnen und Biologen der Universität Bonn wollen zusammen mit dem Fraunhofer UMSICHT und der Firma Hengst nach dem Vorbild von Fischkiemen einen effizienten, nachhaltigen und haltbaren Waschmaschinenfilter entwickeln. Das Projekt »FishFlow« wird vom Bundesministerium für Bildung und Forschung (BMBF) für ein Jahr mit rund 500 000 Euro gefördert.

Im Fokus stehen Filtertechnologien, die die Verbreitung der unter fünf Millimeter kleinen Kunststoffteilchen unterbinden. Wissenschaftlerinnen und Wissenschaftler der Universität Bonn nehmen nun das Maul von Fischen als biologisches Vorbild für neuartige Filter. »Es gibt viele filtrierende Tiere, aber der Apparat der Fische, von den Kiemenbögen bis zur Weiterleitung der Nahrung in den Verdauungstrakt, weist im Vergleich die höchste Ähnlichkeit zu den Verhältnissen in der Waschmaschine auf«, sagt Prof. Alexander Blanke vom Institut für Evolutionsbiologie und Ökologie der Universität Bonn.

In der Waschmaschine wird nicht nur die Wäsche sauber. Durch den Abrieb von Synthetikfasern gelangen mit dem Abwasser auch winzige Kunststoffpartikel in die Umwelt. Biologinnen und Biologen der Universität Bonn wollen zusammen mit dem Fraunhofer UMSICHT und der Firma Hengst nach dem Vorbild von Fischkiemen einen effizienten, nachhaltigen und haltbaren Waschmaschinenfilter entwickeln. Das Projekt »FishFlow« wird vom Bundesministerium für Bildung und Forschung (BMBF) für ein Jahr mit rund 500 000 Euro gefördert.

Im Fokus stehen Filtertechnologien, die die Verbreitung der unter fünf Millimeter kleinen Kunststoffteilchen unterbinden. Wissenschaftlerinnen und Wissenschaftler der Universität Bonn nehmen nun das Maul von Fischen als biologisches Vorbild für neuartige Filter. »Es gibt viele filtrierende Tiere, aber der Apparat der Fische, von den Kiemenbögen bis zur Weiterleitung der Nahrung in den Verdauungstrakt, weist im Vergleich die höchste Ähnlichkeit zu den Verhältnissen in der Waschmaschine auf«, sagt Prof. Alexander Blanke vom Institut für Evolutionsbiologie und Ökologie der Universität Bonn.

Zusammen mit dem Fraunhofer UMSICHT in Oberhausen und der Firma Hengst in Münster starten die Forschenden ein Projekt, mit dem die Strukturen der Fische nachempfunden werden sollen.

Ziel des Forschungsteams ist ein Filter, der möglichst lange hält, nachhaltig gefertigt ist und eine Rückhalteeffizienz von mehr als 90 Prozent aufweist.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

25.03.2021

Fraunhofer-Institute entwickeln neue Technologien für eine grüne Chemie

Produktionsketten defossilisieren sowie eine zirkuläre, treibhausgasneutrale Stoff- und Energiewandlung etablieren – die chemische Industrie hat sich in Sachen Nachhaltigkeit ehrgeizige Ziele gesetzt. Unterstützung bei diesem Prozess leisten ab sofort neun Institute der Fraunhofer-Gesellschaft: Im Leitprojekt ShaPID wollen sie ihre Forschungsaktivitäten für das Erreichen der Nachhaltigkeitsziele bündeln und gleichzeitig ihre Beziehungen zur Branche stärken.

»Konkret wollen wir zeigen, dass eine nachhaltige, grüne Chemie durch praxisnahe technologische Innovationen möglich ist«, erläutert Prof. Ulf-Peter Apfel vom Fraunhofer UMSICHT, einem der beteiligten Institute. »Auf Grundlage der international anerkannten „12 Principles of Green Chemistry“ wollen wir gemeinsam neue Methoden und Technologien entwickeln.« Im Fokus der Forschende stehen dabei vier komplementäre Bereiche: (1) die Synthese-, Reaktions- und Katalysetechnik, (2) die kontinuierliche Prozess- und Verfahrenstechnik, (3) die Modellierung, Simulation und Prozessoptimierung sowie (4) die Digitalisierung und Automation.

Produktionsketten defossilisieren sowie eine zirkuläre, treibhausgasneutrale Stoff- und Energiewandlung etablieren – die chemische Industrie hat sich in Sachen Nachhaltigkeit ehrgeizige Ziele gesetzt. Unterstützung bei diesem Prozess leisten ab sofort neun Institute der Fraunhofer-Gesellschaft: Im Leitprojekt ShaPID wollen sie ihre Forschungsaktivitäten für das Erreichen der Nachhaltigkeitsziele bündeln und gleichzeitig ihre Beziehungen zur Branche stärken.

»Konkret wollen wir zeigen, dass eine nachhaltige, grüne Chemie durch praxisnahe technologische Innovationen möglich ist«, erläutert Prof. Ulf-Peter Apfel vom Fraunhofer UMSICHT, einem der beteiligten Institute. »Auf Grundlage der international anerkannten „12 Principles of Green Chemistry“ wollen wir gemeinsam neue Methoden und Technologien entwickeln.« Im Fokus der Forschende stehen dabei vier komplementäre Bereiche: (1) die Synthese-, Reaktions- und Katalysetechnik, (2) die kontinuierliche Prozess- und Verfahrenstechnik, (3) die Modellierung, Simulation und Prozessoptimierung sowie (4) die Digitalisierung und Automation.

Vom grünen Rohstoff zum grünen Produkt
Die Anwendung der neuen Technologien und Methoden soll im technischen Maßstab an drei Referenzprozessen demonstriert werden, die unterschiedliche Produktsparten der Chemie adressieren: Bei »Green Plastics« geht es um die Gestaltung neuer Polymere aus CO2 und biogenen Rohstoffquellen, während bei »Green Monomers« energieeffiziente Synthesen von Monomeren aus nicht-fossilen Rohstoffen beleuchtet werden. Last but not least wird bei »Efficient Building Blocks« der Einsatz hochreaktiver Moleküle für die atomeffiziente Synthese untersucht. »Alle drei Prozesse beschreiten den Weg vom grünen Rohstoff über eine grüne Prozessführung bis hin zu grünen Produkten«, so Ulf-Peter Apfel. »Die Entwicklung wird eng sowohl von Life Cycle Assessments und Systemanalysen als auch von REACh-Bewertungen und (Öko-)Toxizitätsvorhersagen begleitet.«

Die Forschenden des Fraunhofer UMSICHT konzentrieren sich im Rahmen von ShaPID auf die Etablierung von Demonstratoren im Bereich »Green Monomers«. »Dabei geht es vor allem um die alternative Synthese von 1,4-Butadien und Diolen – allesamt wichtige Verbindungen für die chemische Industrie – aus nachwachsenden Rohstoffen über neue thermische und elektrochemische Pfade«, erklärt Dr. Barbara Zeidler-Fandrich.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

13.11.2020

The AVK presents its awards virtually for the first time

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

3rd Place: “Fireproof composite metal hybrid structure – LEO® fire protection sandwich with integrated Hyconnect steel-glass hybrid connector” – developed by SAERTEX GmbH & Co. KG and Hyconnect GmbH.*

Category “Innovative Processes”
1st Place: “Robotised Injection Moulding (ROBIN)” – developed by Robin, Dresden with the Institute for Lightweight Engineering and Polymer Technology at the TU Dresden*

2nd Place: “Omega stringer from the roll” – developed by the German Aerospace Center, Braunschweig*

3rd Place: “Hybrid die-casting – manufacturing of intrinsic CFRP-aluminium composite structures in aluminium high-pressure die-casting” – developed by Faserinstitut Bremen e. V. with Fraunhofer IFAM, Bremen*

Category “Research and Science”:
1st Place: “New high-temperature resistant UP resins and toughening agents” – developed by Münster University of Applied Sciences with BASF SE Global New Business Development, Leibniz Institute for Polymer Research e. V., Saertex multicom GmbH*

2nd Place: “Scientific basis for the industrial application of the thermoplastic resin transfer moulding (T-RTM) process” – developed by Fraunhofer Institute for Chemical Technology ICT, Pfinztal*

3rd Place: “The material- and energy-efficient production of turbine struts by the integrative combination of thermoset fibre reinforced materials” – developed by the Institute of Polymer Technology, University of Erlangen-Nuremberg with the German Aerospace Center, Gubesch Group, Schmidt WFT, Siebenwurst, Raschig.

Award ceremony on the Internet for the first time
For the first time, due to the Covid-19 pandemic, the award ceremony took place as an online event on 12 November 2020. Many of the award winners’ innovations will be presented again in this year’s AVK Innovation Award brochure. This will be available online: https://www.avk-tv.de/innovationaward.php

 

*Please see attached document for more information.

 

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V

(c) AZL Aachen GmbH
04.03.2019

AZL demonstrates new Ultra-Fast Consolidator Machine at JEC World in Paris

After many years of successful cooperation on JEC World since 2015, the Aachen Center for Integrative Lightweight Production (AZL) renewed the cooperation with the JEC Group for 2019:

At the dedicated exhibition area called “Composites in Action - JEC Group in partnership with AZL” (Hall 5A, D17), AZL and its 9 Partner Institutes of RWTH Aachen University present their latest research and development results. The innovations covering the whole composite value chain including research results of AZL, Fraunhofer Institute for Production Technology IPT and Fraunhofer Institute for Laser Technology ILT, the Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts as well as RWTH Aachen University institutes including the Laboratory for Machine Tools and Production Engineering (WZL), the Welding and Joining Institute (ISF), the “Institut für Textiltechnik” (ITA), the Institute for Automotive Engineering (IKA), the Institute of Structural Mechanics and Lightweight Design (SLA). Following companies are sponsoring partners of this booth and will present their latest products and services: Hille Engineering, Maru Hachi, TELENE and Textechno.

After many years of successful cooperation on JEC World since 2015, the Aachen Center for Integrative Lightweight Production (AZL) renewed the cooperation with the JEC Group for 2019:

At the dedicated exhibition area called “Composites in Action - JEC Group in partnership with AZL” (Hall 5A, D17), AZL and its 9 Partner Institutes of RWTH Aachen University present their latest research and development results. The innovations covering the whole composite value chain including research results of AZL, Fraunhofer Institute for Production Technology IPT and Fraunhofer Institute for Laser Technology ILT, the Institute of Plastics Processing (IKV) in Industry and the Skilled Crafts as well as RWTH Aachen University institutes including the Laboratory for Machine Tools and Production Engineering (WZL), the Welding and Joining Institute (ISF), the “Institut für Textiltechnik” (ITA), the Institute for Automotive Engineering (IKA), the Institute of Structural Mechanics and Lightweight Design (SLA). Following companies are sponsoring partners of this booth and will present their latest products and services: Hille Engineering, Maru Hachi, TELENE and Textechno.

This year, AZL is very proud to present a new machine system development at their booth:
The real machine setup of the “Ultra-Fast Consolidator Machine” will be shown at the AZL booth (Hall 5A, D17) which is one of three finalists for the JEC AWARD 2019 in the category “Industry and Equipment”.

More information:
SMC, AZL, RWTH Aachen AZL
Source:

AZL Aachen GmbH

PrePro2D "PrePro 2D“ machine system for tape placement of tailored blanks and laminates with in-situ consolidation. (c) Fraunhofer IPT.
PrePro2D
16.02.2018

Commercialization of Fraunhofer´s tape-placement and tape winding systems

The two AZL Partners Conbility GmbH and Fraunhofer IPT, Aachen started their long-term cooperation for the further development and for the commercialization of Fraunhofer´s tape-placement and tape winding systems with in-situ-consolidation by the usage of laser or IR heat sources.

With this cooperation, the company Conbility GmbH makes 25 years of expertise in special machine development of tape placement systems of the Fraunhofer Institute for Production Technology IPT commercially available. Conbility offers two different tape processing systems available in different configurations.

The two AZL Partners Conbility GmbH and Fraunhofer IPT, Aachen started their long-term cooperation for the further development and for the commercialization of Fraunhofer´s tape-placement and tape winding systems with in-situ-consolidation by the usage of laser or IR heat sources.

With this cooperation, the company Conbility GmbH makes 25 years of expertise in special machine development of tape placement systems of the Fraunhofer Institute for Production Technology IPT commercially available. Conbility offers two different tape processing systems available in different configurations.

The “PrePro 2D” machine system allows for the automated tailored tape placement of UD laminates and which can be used for subsequent thermoforming or as stiffening structures in injection molding processes. The machine comprises a rotating and translational table which is moved relatively to the applicator station. The table is scalable according to the requirements of customers. Standard table diameters are 1200 mm or 2000 mm. The applicator station can be equipped with a single or with multiple spool applicators. Because of the large process area, a 9 kW IR heater is used for the in-situ-consolidation process.  
Three in one: Three technologies included in one single modular system
Furthermore, the award-winning “PrePro 3D” tape placement and winding applicator is available as modular product with decentral control system (including closed-loop control of energy input into the processing zone) for the “plug-in” implementation in existing robot systems or machine systems by standard interfaces for the communication with the master control system. Conbility provides the single applicator as well as turn-key ready systems including the robot and handling systems.

Unique selling point of the PrePro 3D system is its multifunctional range of usage: it accomplishes laser-assisted thermoplastic tape placement, IR-assisted thermoset prepreg placement and dry fiber placement: Three technologies included in one single modular system.  

During the JEC World in Paris (March 6th – 8th 2018), Conbility GmbH will present its new “VCSEL Tape Placement and Winding Applicator” (Fig. 3), developed in cooperation with Fraunhofer IPT and Philips Photonics at the AZL Composites in Action area (Hall 5A, C55).

VCSEL Laser Systems as heat source for lower investment and process costs
This applicator uses an integrated VCSEL Laser System as heat source which has been developed by Philips Photonics. This tape placement and winding applicator can also be integrated as modular “plug-in” system into industrial jointed-arm and linear gantry robots in variable manufacturing cells. Using the new VCSEL Laser as heat source (VCSEL: Vertical-Cavity Surface Emitting Laser) leads to significant lower investment and process cost in comparison to other laser systems. Furthermore, the VCSEL laser system can accomplish controllable in-process adjustments of the laser-spot geometry as well as the intensity distribution within the spot size during the process (in-process control of laser-spot geometries and intensities) for the first time. The new system with 2 kW laser power and 10 separate emission zones which can be controlled separately will be shown at JEC World in Paris 2018 as new product of Conbility GmbH.