From the Sector

from to
Reset
3 results
15.08.2022

BVMed: „Hygienemaßnahmen konsequenter umsetzen und adäquat finanzieren“

Der Bundesverband Medizintechnologie (BVMed) fordert in seinem neuen Positionspapier, Hygienemaßnahmen in medizinischen Einrichtungen konsequenter umzusetzen und adäquat zu finanzieren. „Das strikte Einhalten von grundsätzlichen Präventionsmaßnahmen schützt vor der Verbreitung von Infektionen und dient damit der Wahrung von Gesundheit und Leben. Mit der jetzigen Sommer-Corona-Welle 2022 nehmen Bewusstsein und Hygiene-Compliance in der Bevölkerung jedoch leider wieder spürbar ab“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll. Der BVMed fordert unter anderem ausreichende Ressourcen, eine adäquate Erstattung sowie eine zügige Umsetzung von hygienerelevanten Punkten aus dem Koalitionsvertrag.

Der Bundesverband Medizintechnologie (BVMed) fordert in seinem neuen Positionspapier, Hygienemaßnahmen in medizinischen Einrichtungen konsequenter umzusetzen und adäquat zu finanzieren. „Das strikte Einhalten von grundsätzlichen Präventionsmaßnahmen schützt vor der Verbreitung von Infektionen und dient damit der Wahrung von Gesundheit und Leben. Mit der jetzigen Sommer-Corona-Welle 2022 nehmen Bewusstsein und Hygiene-Compliance in der Bevölkerung jedoch leider wieder spürbar ab“, so BVMed-Geschäftsführer und Vorstandsmitglied Dr. Marc-Pierre Möll. Der BVMed fordert unter anderem ausreichende Ressourcen, eine adäquate Erstattung sowie eine zügige Umsetzung von hygienerelevanten Punkten aus dem Koalitionsvertrag.

Das BVMed-Positionspapier wurde vom BVMed-Fachbereich „Nosokomiale Infektionen“ (FBNI) erarbeitet. Nosokomiale Infektionen stehen im zeitlichen Zusammenhang mit medizinischen Maßnahmen in Krankenhäusern, Pflegeeinrichtungen oder in ambulanten Praxen. Nach aktuellen Schätzungen sind außerhalb von Pandemien jährlich etwa 8,9 Millionen Menschen in der EU von solchen behandlungsassoziierten Infektionen betroffen. Die häufigsten Formen sind Lungenentzündung, Harnwegs- und Wundinfektionen bis hin zur Sepsis (Blutvergiftung). Allein in Deutschland sterben jedes Jahr bis zu 20.000 Menschen an diesen Infektionen – das sind schätzungsweise sechsmal so viele Tote wie bei Straßenverkehrsunfällen. Zudem ist bereits etwa ein Drittel der Bakterien, die diese Infektionen verursachen, gegen Antibiotika resistent.

Bis zu einem Drittel der nosokomialen Infektionen gelten als vermeidbar. Die konsequente Umsetzung von Hygienemaßnahmen und der Einsatz risikominimierender Medizinprodukte und -technologien sind nach Ansicht des BVMed „effektive Mittel zur Vermeidung von behandlungsassoziierten Infektionen. Dies führt zu erheblichen Kosten- und Ressourceneinsparungen im Gesundheitswesen bei gleichzeitiger Verbesserung der Versorgungsqualität.“

Das BVMed-Positionspapier schlägt verschiedene Maßnahmen zur Verbesserung vor, wie:

  • Jährliche Daten von hoher Qualität:
    Daten zu nosokomialen Infektionen müssen in ihrem Umfang jährlich veröffentlicht werden, um durch Transparenz Aufmerksamkeit auf die Dimension des Problems zu lenken.
  • Umsetzung in Verordnungen:
    Empfehlungen von Experten, wie die der Kommission für Krankenhaushygiene und Infektionsprävention am Robert Koch-Institut (KRINKO), sollten in den Landeshygieneverordnungen der Bundesländer explizit Berücksichtigung finden. Sie müssen in den medizinischen Einrichtungen vollständig umgesetzt werden.
  • Ausreichende Ressourcen:
    Um hohe Hygienestandards und effektiven Infektionsschutz in medizinischen Einrichtungen aufrecht zu erhalten und dauerhaft zu gewährleisten, ist eine ausreichende Versorgung mit entsprechenden Ressourcen unabdingbar. Neben vermehrtem Einsatz gut aus- und regelmäßig weitergebildeten Personals gehören dazu auch spezifische Medizinprodukte und -technologien.
  • Adäquate Erstattung:
    Angesichts des steigenden Kostendrucks auf die Sachkosten im Krankenhaus und vieler im Einheitlichen Bewertungsmaßstab (EBM) nicht berücksichtigter Hygiene- und Infektionsschutzmaßnahmen im ambulanten Sektor stehen wir für eine auskömmliche Erstattung dieser Maßnahmen in allen medizinischen Einrichtungen. Die notwendigen Aufwände für Hygienemaßnahmen zur Umsetzung des Infektionsschutzgesetzes im Rahmen von medizinischen sowie pflegerischen Behandlungen in Arztpraxen, Kliniken und Pflegeeinrichtungen müssen konsequent evaluiert und vollumfänglich durch die Gesetzliche Krankenversicherung (GKV), die Bundesländer und die Pflegeversicherung erstattet werden.
  • Umsetzung von relevanten Punkten aus dem Koalitionsvertrag:
    Der Koalitionsvertrag der aktuellen Regierung stellt vielversprechende Maßnahmen in Aussicht, die einen Einfluss auf den Infektionsschutz haben. Hierzu gehören: der Nationale Präventionsplan, Umwelt und Nachhaltigkeit, Verbesserung der Situation in der Pflege, Stärkung des Öffentlichen Gesundheitsdienstes, Pandemievorsorge, sowie die Stärkung des RKI. Diese wichtigen Themen müssen nun mit Nachdruck angegangen werden.

„Patient:innen und Mitarbeiter:innen in medizinischen Einrichtungen haben ein Recht, vor gefährlichen und im Zweifel lebensbedrohlichen Infektionen geschützt zu werden“, so der Appell des BVMed.

Source:

BVMed

AFFIX Labs launches world’s first long-lasting surface treatment to kill the coronavirus © 2020 AFFIX Labs
Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact. Si-Quat by AFFIX Labs can be implemented onto any surface.
20.07.2020

AFFIX Labs launches world’s first long-lasting surface treatment to kill the coronavirus

  • Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
     

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

  • Si-Quat by AFFIX Labs is a versatile anti-viral surface treatment that has been scientifically proven to last for months on any surface or textile while effectively killing the COVID-19 pathogen upon contact.
     

Helsinki - Leading chemical binding expert AFFIX Labs has harnessed its global experience in disease prevention to create the first long-lasting surface treatment proven to kill COVID-19. Si-Quat combines a safe and well-established disinfectant and a proprietary chemical binding technique, so that the active ingredient can kill viruses, including SARS-COV-2. Testing at Portugal’s Biochemistry Institute at the University of Lisbon proves that Si-Quat effectively kills the COVID-19 pathogens that it comes into contact with.

“Tragedies have unfolded across the globe, affecting different countries at varying degrees. The second waves of COVID-19 are just appearing on the horizon. This long-lasting surface treatment is a viable, accessible solution across cultures. By killing the COVID-19 pathogen on surfaces before it can infect people, the Si-Quat solution is a game changer. It can provide increased security and peace of mind to your communities, as well as your customers,” says Tom Sam, CEO of AFFIX Labs.

Si-Quat has been tested to kill 99.99% of microbes within minutes, while still being fully safe to touch. Proven to be effective for about a month on frequently touched surfaces, it is the longest lasting anti-viral surface treatment available to reduce the spread of the novel coronavirus. The product is non-corrosive, free from silver salts and heavy metal nanoparticles, and perfectly safe to touch.

Several major agencies around the globe have already accepted quaternary ammonium, the main ingredient in the surface coating, to be an effective surface treatment against the novel coronavirus, including the World Health Organization (WHO), the US Environmental Protection Agency, the American Chemistry Council (ACC) and the European Chemical Agency (ECHA).

Si-Quat was invented in January 2020 by the AFFIX Labs’ Repeltec development team to specifically help combat the COVID-19 outbreak. The product is based on the trusted and safe disinfectant quaternary ammonium, which is chemically bound to align silane quaternary ammonium molecules (silane quats) in a highly effective manner. Positively charged nitrogen particles then actively attract viruses and bacteria, penetrating the membranes and killing them within minutes.

Rigorous testing has shown Si-Quat to adhere to almost any surface, performing as the most durable surface treatment commercially available. Due to its incredibly strong layer, the solution only wears down on surfaces after thousands of touches or multiple cleaning cycles. This means that on heavily used surfaces, such as door handles and counters, Si-Quat will be effective for about a month. On rarely touched surfaces like walls, it has the potential to protect for years. Since the product is incredibly easy to apply, technicians require minimal training and only basic protection. They simply have to brush or spray Si-Quat onto the surface and allow it to dry for 6 hours.

“Other sanitising solutions require reapplication to every surface several times daily, interrupting business operations. This results in additional costs and disruptions at a time when many companies are already struggling,” Sam explains. “By combining proven efficacy, safety and long durability, Si-Quat is emerging as an important weapon in the battle against the spread of COVID-19.”

AFFIX Labs has begun to roll out the distribution of Si-Quat across the globe, with new regions being serviced every week. It is currently looking for distribution partners in local markets.

The project leading to the development of Si-Quat included funding from the European Institute of Innovation and Technology, a body of the European Union, under the Horizon 2020 Framework for Research and Innovation.

Archroma starts production of hand sanitizers to help fight COVID-19. © 2020 Archroma
Archroma starts production of hand sanitizers to help fight COVID-19.
13.07.2020

ARCHROMA Starts Production of Hand Sanitizers to Help Fight COVID-19

As part of its active engagement in the fight against COVID-19, Archroma, a global leader in color and specialty chemicals towards sustainable solutions, started bulk production of a new range of hand sanitizers at its Landhi site in Pakistan in May 2020. The new Kieralon® HS range was developed by the R&D team at the Archroma Center of Excellence in Karachi, in line with the World Health Organization (WHO) recommendations.

Sanitizers are currently in high demand in Pakistan in hospitals, isolation centers, medical institutes and other health care environments, due to the COVID-19 outbreak. The use of sanitizers has also been made mandatory in all factories, offices and public places, driving the demand even higher.

The Kieralon® HS range is being produced in different grades and concentrations to eliminate a broad range of germs, bacteria and viruses, to cater for various healthcare and hygiene requirements. They also include emollients and display non-stick and quick drying effect, for skin comfort.

As part of its active engagement in the fight against COVID-19, Archroma, a global leader in color and specialty chemicals towards sustainable solutions, started bulk production of a new range of hand sanitizers at its Landhi site in Pakistan in May 2020. The new Kieralon® HS range was developed by the R&D team at the Archroma Center of Excellence in Karachi, in line with the World Health Organization (WHO) recommendations.

Sanitizers are currently in high demand in Pakistan in hospitals, isolation centers, medical institutes and other health care environments, due to the COVID-19 outbreak. The use of sanitizers has also been made mandatory in all factories, offices and public places, driving the demand even higher.

The Kieralon® HS range is being produced in different grades and concentrations to eliminate a broad range of germs, bacteria and viruses, to cater for various healthcare and hygiene requirements. They also include emollients and display non-stick and quick drying effect, for skin comfort.

In April 2020, Archroma announced the introduction in Brazil of Mowiplus® HPC 9600, a new thickener for sanitizing gels, developed to address the global shortage in the thickener traditionally used for sanitizing gels.

Archroma is also actively supporting manufacturers in the production of face masks and medical protective equipment. Its antimicrobial and barrier products in particular are in high demand, and Archroma is making every effort to assist existing and new customers entering this sector by providing technical know-how and support.

The company is supporting producers of packaging & paper who are facing high demand for food packaging as many restaurants have switched to delivery or take-away, as well as for parcels and boxes supporting online shopping.

Mujtaba Rahim, CEO of Archroma Pakistan comments, “Within Archroma we are cognizant of the acute community need for high quality hygiene products that are also comfortable for users, as hand sanitizers tend to be harsh on the skin, so we took on the challenge to develop and start production in record time. The Archroma team in Pakistan won’t rest in fighting the COVID-19 pandemic, and hopes this new product will help to stop the spread of the virus and the suffering that it causes.”

Source:

EMG for Archroma