From the Sector

from to
Reset
234 results
26.11.2020

Autoneum: Current assessment of the 2020 financial year

The global automobile production has been recovering faster than expected since summer. If this positive trend continues through the full second half of the year, Group revenue in local currencies in the second semester is likely to be just around –5% below the level of the prior year period. For the full year 2020 it is anticipated that revenue in local currencies will decline by around –20% compared to 2019.

Based on this development of revenue, the extensive cost reduction measures taken in response to the COVID-19 crisis and the on-schedule progress of the turnaround in North America, an EBIT margin of 4-5% is expected for the second half of the year and a slightly positive EBIT margin for 2020 as a whole. Supported by the strict management of working capital and investments, the free cash flow is likely to be in the higher double-digit million range, which should enable a slight reduction in debt.

The outlook for 2021 and especially the first half-year remains uncertain and depends strongly on how the pandemic will develop. According to forecasts, global vehicle production in 2021 will still not reach the level of 2019.

The global automobile production has been recovering faster than expected since summer. If this positive trend continues through the full second half of the year, Group revenue in local currencies in the second semester is likely to be just around –5% below the level of the prior year period. For the full year 2020 it is anticipated that revenue in local currencies will decline by around –20% compared to 2019.

Based on this development of revenue, the extensive cost reduction measures taken in response to the COVID-19 crisis and the on-schedule progress of the turnaround in North America, an EBIT margin of 4-5% is expected for the second half of the year and a slightly positive EBIT margin for 2020 as a whole. Supported by the strict management of working capital and investments, the free cash flow is likely to be in the higher double-digit million range, which should enable a slight reduction in debt.

The outlook for 2021 and especially the first half-year remains uncertain and depends strongly on how the pandemic will develop. According to forecasts, global vehicle production in 2021 will still not reach the level of 2019.

Source:

Autoneum Management AG

HeiQu: Carlo Centonze and his daughter Anna (c) HeiQ
Carlo Centonze and his daughter Anna
20.11.2020

HeiQ Viroblock wins Swiss Technology Award 2020

The Swiss Technology Award announced the 2020 prizes, and among all the notable finalist innovations of the year, HeiQ was bestowed the highest honor as First Prize Winner for its breakthrough antiviral textile technology HeiQ Viroblock.

Developed in record time and launched after the Swiss authorities announced the lockdown in March 2020, HeiQ Viroblock has had a major impact on the global textile industry and is being unprecedently adopted by mills around the world.

The Swiss Technology Award announced the 2020 prizes, and among all the notable finalist innovations of the year, HeiQ was bestowed the highest honor as First Prize Winner for its breakthrough antiviral textile technology HeiQ Viroblock.

Developed in record time and launched after the Swiss authorities announced the lockdown in March 2020, HeiQ Viroblock has had a major impact on the global textile industry and is being unprecedently adopted by mills around the world.

The technology that makes HeiQ Viroblock a unique innovation
What exemplifies HeiQ Viroblock is its ability to turn any fabric antiviral. It’s among the first textile technologies in the world to be proven effective against SARS-CoV-2 (COVID-19). HeiQ Viroblock consists of a combination of HeiQ’s patent-pending vesicle and silver technologies. The two mechanisms of attack result in an over 99.9% destruction of viruses in 5 minutes that is unrivaled in the industry. HeiQ Viroblock is a unique patent-pending formulation of 72% bio-based ingredients, made with 100% cosmetic-grade materials from the International Nomenclature of Cosmetic Ingredients list. HeiQ Viroblock is also a shining example of Swiss cooperation between academics and the industry. The silver technology was developed at ETHZ (Eidgenössische Technische Hochschule Zürich), the vesicle technology at EPFL (École polytechnique fédérale de Lausanne), and the production was scaled up at FHNW (Fachhochschule Nordwestschweiz).

HeiQ Viroblock has demonstrated unparalleled speed from laboratory to consumer
HeiQ launched the new antiviral textile technology HeiQ Viroblock on March 16, 2020 – two hours after Switzerland declared a state of emergency. This was made possible with the indispensable support of Swiss research Partner FHNW and the EPFL which helped accelerate product validation. The fast scale-up of production was enabled by the FHNW School of Life Sciences with their new Process Technology Center (PTC) by special permit. With its agile operations and global footprint, HeiQ also brought HeiQ Viroblock face masks and other PPE (personal protection equipment) to different corners of the world where are needed. Now, Swiss consumers can also acquire HeiQ Viroblock enhanced face masks online.

Reacting to the news of HeiQ Viroblock winning this year’s Swiss Tech Award, Co-founder and CEO Carlo Centonze says: “I am both amazed and honored that HeiQ has won this award a second time in just ten years, and from among some incredible tech innovation finalists. It confirms our resolve to push the boundaries and push innovations to help the world with its most pressing and imminent problems. This award is recognition for our company and team that have spared no efforts to develop and launch HeiQ Viroblock at such speed and make a valuable contribution to the global pandemic efforts. We remain true to our mission: enhancing the everyday lives of people with smart and efficient textile effects.”

 

Source:

HeiQ

Oerlikon: Meltblown und Spunbond (c) Oerlikon
19.11.2020

Oerlikon: Meltblown and Spunbond technologies

Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at Oerlikon Nonwoven. The meltblown technology from Neumünster is recognized by the market as being one of the technically most efficient methods for producing highly-separating filter media made from plastic fibers.

Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at Oerlikon Nonwoven. The meltblown technology from Neumünster is recognized by the market as being one of the technically most efficient methods for producing highly-separating filter media made from plastic fibers.

Protective equipment demands high-end nonwoven products
The rising demand for protective masks and other medical protective equipment since the start of the coronavirus pandemic and the associated global ramping up of production capacities has also resulted in an increase in the demand for nonwovens for the production thereof. Initially, this resulted in bottlenecks in the provision of meltblown filter nonwovens. To this end, there had until this point be very few producers of medical filter nonwovens outside China. Meanwhile, the demand for spunbond systems is also rising. “Due to the structure of our group, we are in the fortunate position to swiftly reallocate and free up our production capacities. This means that we are able to relatively quickly deliver not only meltblown systems, but also spunbond equipment”, explains Dr. Ingo Mählmann, Head of Sales & Marketing at Oerlikon Nonwoven, talking about the positive situation at the company.

The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon Nonwoven systems. “Our machines and systems for manufacturing manmade fiber and nonwovens solutions enjoy an outstanding reputation throughout the world. Ever more manufacturers in the most diverse countries are hoping to become independent of imports”, comments Dr. Mählmann. The Oerlikon Nonwoven meltblown systems are being delivered to Germany, China, Turkey, United Kingdom, South Korea, Italy, France, North America and – for the very first time – to Australia until well into 2021.

Quality and efficiency in demand
Depending on the purpose of the application, medical PPE (personal protection equipment) should be breathable and comfortable to wear, protect medical staff against viruses, bacteria and other harmful substances and form a barrier against liquids. For these reasons, they are often made of either pure spunbond or of spunbond-meltblown combinations. Here, the meltblown nonwoven core assumes the barrier or filter task, while the spunbond has to retain its shape, while being tear-resistant, abrasion-proof, absorbent, particularly flame-resistant and nevertheless extremely soft on the skin.

All masks are not created equal – thanks to the ecuTEC+
Protection against infections such as coronavirus can only be guaranteed with the right quality.

The nonwovens can be electrostatically-charged in order to further improve the filter performance without additionally increasing breathing resistance. Here, Oerlikon Nonwovenʼs patented ecuTEC+ electro-charging unit excels in terms of its extreme flexibility. Nonwovens manufacturers can freely choose between numerous variation options and set the optimal charging method and intensity for their specific applications. In this way, even the smallest particles are still attracted and reliable separated by a relatively open-pored nonwoven. Nevertheless, mask wearers are still able to easily breathe in and out due to the comparatively loose formation of the fibers. To this end, it comes as no surprise that all meltblown systems currently destined for the production of mask nonwovens are equipped with the ecuTEC+ unit.

Maschenindustrie leicht erholt © Gesamtmasche
Fragile Erholung: Die Umsätze sind auf Stabilisierungskurs. „Das funktioniert aber nur, wenn die Erträge nicht von neuen Steuern und bürokratischen Auflagen aufgefressen werden“, sagt Martina Bandte, Präsidentin von Gesamtmasche.
13.11.2020

Maschenindustrie leicht erholt

„Gerade jetzt darf die Politik uns nicht noch mehr Fesseln anlegen“

Stuttgart – Nach beispiellosen Umsatzeinbrüchen bis in die Sommermonate zeichnet sich in der Maschenindustrie eine leichte Erholung ab. Der Geschäftsklimaindex der Branche kletterte zum 4. Quartal wieder in den positiven Bereich. Martina Bandte, Präsidentin von Gesamtmasche, mahnt die Politik zu Augenmaß: „Steuererhöhungen und zusätzliche Bürokratie sind das letzte, was wir jetzt brauchen können.“

In der ersten Jahreshälfte hatten die Maßnahmen zur Eindämmung des Corona-Infektionsgeschehens zu beispiellosen Umsatzeinbrüchen geführt. In der Folge musste über die Hälfte der Firmen ihr Personal langfristig reduzieren. Mit 7,90 Indexpunkten befindet sich der Geschäftsklimaindex jetzt wieder im leichten Plus. Anlass zur Entwarnung gibt die Entwicklung noch lange nicht. „Wir werden selbst bei günstigen Rahmenbedingungen Jahre brauchen, um die tiefe Rezession auszugleichen“, mahnt Martina Bandte, Präsidentin von Gesamtmasche.

„Gerade jetzt darf die Politik uns nicht noch mehr Fesseln anlegen“

Stuttgart – Nach beispiellosen Umsatzeinbrüchen bis in die Sommermonate zeichnet sich in der Maschenindustrie eine leichte Erholung ab. Der Geschäftsklimaindex der Branche kletterte zum 4. Quartal wieder in den positiven Bereich. Martina Bandte, Präsidentin von Gesamtmasche, mahnt die Politik zu Augenmaß: „Steuererhöhungen und zusätzliche Bürokratie sind das letzte, was wir jetzt brauchen können.“

In der ersten Jahreshälfte hatten die Maßnahmen zur Eindämmung des Corona-Infektionsgeschehens zu beispiellosen Umsatzeinbrüchen geführt. In der Folge musste über die Hälfte der Firmen ihr Personal langfristig reduzieren. Mit 7,90 Indexpunkten befindet sich der Geschäftsklimaindex jetzt wieder im leichten Plus. Anlass zur Entwarnung gibt die Entwicklung noch lange nicht. „Wir werden selbst bei günstigen Rahmenbedingungen Jahre brauchen, um die tiefe Rezession auszugleichen“, mahnt Martina Bandte, Präsidentin von Gesamtmasche.

„Angesichts der Corona-Pandemie hat sich der Koalitionsausschuss schon im Frühjahr dafür ausgesprochen, keine neuen Belastungen zu schaffen. Das fordern wir jetzt auch ein. Sonst wird die Industrie durch exzessive Kostenbelastungen in Existenznot geraten.“ Aktuell seien mehrere Gesetze in der Pipeline, die bereits 2021 enorme Mehrkosten in den Betrieben verursachen. „Das bedeutet erhebliche Wettbewerbsnachteile und bedroht Arbeitsplätze. Ich nenne nur die nationale CO2-Bepreisung, die zu einem sprunghaften Anstieg der Kosten für produzierende Unternehmen, aber auch für private Haushalte führen wird.“

Der Geschäftsklima-Index verweilte nach einem historischen Tief im Frühjahr noch bis zum Herbst im negativen Bereich. Zum 4. Quartal tendiert er wieder positiv, wobei die Erwartungen für die kommenden sechs Monate mit 10,52 deutlich über der aktuellen Lagebeurteilung von 5,56 Punkten liegen. Die Hersteller bauen dabei auf eine Belebung der Nachfrage, insbesondere im Inland. Mit einem spürbaren Anziehen des Auslandsgeschäfts rechnet zwar ein Drittel der Befragten. Allerdings glauben fast 40 Prozent der Hersteller, dass in wichtigen Absatzmärkten sogar noch weitere Einbrüche bevorstehen.

Source:

GESAMTMASCHE e. V.

13.11.2020

The AVK presents its awards virtually for the first time

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

3rd Place: “Fireproof composite metal hybrid structure – LEO® fire protection sandwich with integrated Hyconnect steel-glass hybrid connector” – developed by SAERTEX GmbH & Co. KG and Hyconnect GmbH.*

Category “Innovative Processes”
1st Place: “Robotised Injection Moulding (ROBIN)” – developed by Robin, Dresden with the Institute for Lightweight Engineering and Polymer Technology at the TU Dresden*

2nd Place: “Omega stringer from the roll” – developed by the German Aerospace Center, Braunschweig*

3rd Place: “Hybrid die-casting – manufacturing of intrinsic CFRP-aluminium composite structures in aluminium high-pressure die-casting” – developed by Faserinstitut Bremen e. V. with Fraunhofer IFAM, Bremen*

Category “Research and Science”:
1st Place: “New high-temperature resistant UP resins and toughening agents” – developed by Münster University of Applied Sciences with BASF SE Global New Business Development, Leibniz Institute for Polymer Research e. V., Saertex multicom GmbH*

2nd Place: “Scientific basis for the industrial application of the thermoplastic resin transfer moulding (T-RTM) process” – developed by Fraunhofer Institute for Chemical Technology ICT, Pfinztal*

3rd Place: “The material- and energy-efficient production of turbine struts by the integrative combination of thermoset fibre reinforced materials” – developed by the Institute of Polymer Technology, University of Erlangen-Nuremberg with the German Aerospace Center, Gubesch Group, Schmidt WFT, Siebenwurst, Raschig.

Award ceremony on the Internet for the first time
For the first time, due to the Covid-19 pandemic, the award ceremony took place as an online event on 12 November 2020. Many of the award winners’ innovations will be presented again in this year’s AVK Innovation Award brochure. This will be available online: https://www.avk-tv.de/innovationaward.php

 

*Please see attached document for more information.

 

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V

Lockdown light: Massive Umsatzeinbrüche in erster November-Woche (c) BTE Handelsverband Textil
BTE-Präsident Steffen Jost
10.11.2020

Lockdown light: Massive Umsatzeinbrüche in erster November-Woche

Der stationäre Fashionhandel ist handelsweit unverändert die Branche, die am stärksten unter der Corona-Pandemie leidet. Bereits Mitte Oktober waren mit dem Anstieg der Infizierten-Zahlen und den damit verbundenen Warnungen der Politik die Kundenfrequenzen und Umsätze in den Mode- und Schuhgeschäften massiv eingebrochen. Der Shutdown der Gastronomie und der Freizeitbranche hat die Kundenfrequenzen noch einmal nach unten gedrückt. „Nach ersten BTE-Berechnungen liegen die Umsätze in der ersten November-Woche branchenweit rund 40 Prozent unter Vorjahr, in etlichen Fällen kamen Modehändler nicht mal auf die Hälfte ihrer üblichen Umsätze“, berichtet BTE-Präsident Steffen Jost. „Aktuell machen die meisten Geschäfte jeden Tag Verlust, weil die Umsätze nicht mal die anfallenden Kosten decken.“

Der stationäre Fashionhandel ist handelsweit unverändert die Branche, die am stärksten unter der Corona-Pandemie leidet. Bereits Mitte Oktober waren mit dem Anstieg der Infizierten-Zahlen und den damit verbundenen Warnungen der Politik die Kundenfrequenzen und Umsätze in den Mode- und Schuhgeschäften massiv eingebrochen. Der Shutdown der Gastronomie und der Freizeitbranche hat die Kundenfrequenzen noch einmal nach unten gedrückt. „Nach ersten BTE-Berechnungen liegen die Umsätze in der ersten November-Woche branchenweit rund 40 Prozent unter Vorjahr, in etlichen Fällen kamen Modehändler nicht mal auf die Hälfte ihrer üblichen Umsätze“, berichtet BTE-Präsident Steffen Jost. „Aktuell machen die meisten Geschäfte jeden Tag Verlust, weil die Umsätze nicht mal die anfallenden Kosten decken.“

Betriebswirtschaftlich ist das Jahr ohnehin nicht mehr zu retten. Bis auf wenige glückliche Ausnahmen dürften 2020 so gut wie alle Textil- und Schuhgeschäfte tief in den roten Zahlen landen. Diese Geschäfte werden nur überleben, wenn sie auf Reserven und Gespartes zurückgreifen können. Bei vielen Unternehmern ist das gleichbedeutend mit dem Verzehr oder sogar vollständigen Verlust der Altersversorgung. „Im Gegensatz zu Großunternehmen können sich die meisten Mittelständler auch nicht über eine Insolvenz entschulden, da sie in der Regel persönlich haften“, weiß Jost.

Es ist daher zu erwarten, dass im nächsten Jahr viele Mode- und Schuhgeschäfte für immer schließen werden, weil sie die neue Ware und die Miete nicht mehr bezahlen können. Für die Innenstädte ist diese Entwicklung dramatisch. Das Ladensterben wird viele Standorte zu Geisterstädten machen und auch in den Lauflagen der Großstädte werden viele Lichter für immer ausgehen. „Wenn die Politik dies verhindern will, brauchen wir massive direkte Hilfen“, fordert BTE-Präsident Jost.

Digitalisierung und Online-Verkauf sind dabei keinesfalls ein Allheilmittel. Denn ein Verkauf über Online-Plattformen wie Amazon oder Zalando kostet den Händler rund 20 Prozent vom Umsatz. „Da die durchschnittliche Umsatzrendite im mittelständischen Modehandel bei rund drei Prozent vom Umsatz liegt, ist dies für stationäre Multilabel-Händler keine wirkliche Option“, rechnet Jost vor. „Wir können bei insgesamt sinkenden Umsätzen nicht gleichzeitig die Kosten für den Betrieb eines stationären Geschäftes und die eines Online-Händlers stemmen.“

Für Jost würde das nur funktionieren, wenn die Geschäfte sowohl bei den Mieten als auch bei den Plattform-Gebühren massiv entlastet werden. Nötig ist hier ein deutliches Entgegenkommen von Vermietern und Plattform-Betreibern. Jost: „Die aktuelle Ankündigung von Zalando, zumindest bis zum ersten Quartal im Händler-Programm auf die Partner-Provision zu verzichten, ist da ein richtiger Schritt.“

Source:

BTE Handelsverband Textil

Archroma: Report (c) Archroma
09.11.2020

Archroma releases its third Sustainability Report

Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced the release of its third Sustainability Report.

Prepared again in accordance with the Global Reporting Initiative (GRI) standards, and covering Fiscal Year 2019, the report outlines the company’s progress on its priority sustainability topics, such as human health and environmental safety, resource efficiency, sustainable sourcing and product stewardship, as well as diversity & inclusion, and talent management.

All activities described in the report support the 3 pillars of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced. It’s our nature." This approach is the company’s guiding light in challenging the status quo to making its operations and its value chains sustainable.

“As our industries navigate through the COVID-19 pandemic, the temptation for some will be to push back on the urgent need to address the climate crisis. We cannot allow that. Because after all, it's our nature”, Heike van de Kerkhof, CEO of Archroma, comments.

Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced the release of its third Sustainability Report.

Prepared again in accordance with the Global Reporting Initiative (GRI) standards, and covering Fiscal Year 2019, the report outlines the company’s progress on its priority sustainability topics, such as human health and environmental safety, resource efficiency, sustainable sourcing and product stewardship, as well as diversity & inclusion, and talent management.

All activities described in the report support the 3 pillars of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced. It’s our nature." This approach is the company’s guiding light in challenging the status quo to making its operations and its value chains sustainable.

“As our industries navigate through the COVID-19 pandemic, the temptation for some will be to push back on the urgent need to address the climate crisis. We cannot allow that. Because after all, it's our nature”, Heike van de Kerkhof, CEO of Archroma, comments.

The report can be downloaded here.

Source:

Archroma / EMG

Lenzing introduces blockchainenabled traceability platform (c) Lenzing
06.11.2020

Lenzing introduces blockchainenabled traceability platform

  • New level of transparency in the textile industry
  • Building on several successful pilot projects with TextileGenesis™, the digital platform for the traceability across the textile supply chain has now been introduced.

The Lenzing Group, a leading company in the area of wood-based specialty fibers, celebrates another milestone on the way to making the textile and apparel industry more sustainable and transparent. Since 2019, Lenzing has been using the blockchain technology powered by the Hong Kong start-up TextileGenesis™ to ensure the traceability of textiles from fiber to production and distribution. After several successful pilot projects, the digital platform was launched on 5 November for TENCEL™ and LENZING™ ECOVERO™ branded fibers. The platform provides customers and partners as well as consumers with an overview across the entire textile supply chain.

  • New level of transparency in the textile industry
  • Building on several successful pilot projects with TextileGenesis™, the digital platform for the traceability across the textile supply chain has now been introduced.

The Lenzing Group, a leading company in the area of wood-based specialty fibers, celebrates another milestone on the way to making the textile and apparel industry more sustainable and transparent. Since 2019, Lenzing has been using the blockchain technology powered by the Hong Kong start-up TextileGenesis™ to ensure the traceability of textiles from fiber to production and distribution. After several successful pilot projects, the digital platform was launched on 5 November for TENCEL™ and LENZING™ ECOVERO™ branded fibers. The platform provides customers and partners as well as consumers with an overview across the entire textile supply chain.

With the COVID-19 pandemic, more changes have been brought to the already transforming fashion and textile industries. To date, supply chain traceability has become a top priority for apparel and home brands. With the blockchain-enabled supply chain traceability platform powered by TextileGenesis™, Lenzing supports the entire supply chain in meeting the increasing demand for transparency and sustainability.

Phased onboarding and new digital certificates

A follow-up of a 12-month pilot program and field trials with four leading sustainable brands (H&M, ArmedAngels, Mara Hoffman and Chicks) and supply chain players from 10 countries in three regions, the global roll-out of Lenzing’s blockchain-enabled supply chain traceability platform will be conducted in phases. During the first phase, Lenzing’s supply chain partners based in South Asia (India, Bangladesh, Pakistan and Sri Lanka) will complete the onboarding process within Q4 2020. An estimated 300+ supply chain partners in China and Turkey will also join the program in Q1 2021. It is estimated that by Q2 2021,  most eligible Lenzing supply chain partners will be onboarded into the platform, ensuring full supply chain traceability.

One of the core components of the platform powered by TextileGenesis™ is integration with the Lenzing EBranding fabric certification system, which allows brands and retailers not only to access the full supply chain traceability for TENCELTM and LENZINGTM ECOVEROTM branded fibers but also to view the results of forensic (physical) verification of fabric samples via the digitally signed Lenzing E-Branding fabric certificates. “

Over the past year, during the pilot program and field trials we have been receiving very positive feedback from brands and supply chain partners. Our brand partners have also been encouraging us to accelerate the global roll-out for traceability of Lenzing fibers. With this new system and the integration with Lenzing E-Branding fabric certificates, the entire Lenzing ecosystem will create an unprecedented level of transparency. This will provide consumers with the most sustainable and climate-friendly clothing and home textile products that are made of TENCEL™ or LENZING™ ECOVERO™ branded fibers”, says Robert van de Kerkhof, Chief Commercial Officer and Member of the Board at Lenzing.

“With increasing compliance and reputational risks, CEOs and Boards of top 100 fashion brands have committed to using 100% sustainable and traceable fibers over the next 5 years, with transparency being a core part of business priorities. Sustainability and traceability are two sides of the same coin, and it’s great to see Lenzing paving the way for the entire fashion industry to follow. Our supply chain traceability platform will create digital accounting for Lenzing’s innovative and sustainable fibers across the entire supply chain using Fibercoins™ traceability technology”, says Amit Gautam, Chief Executive Officer and Founder of TextileGenesis™.

Fibercoin™ technology to ensure traceability across supply chain

Through using the innovative Fibercoin™ technology of the TextileGenesis™ platform, Lenzing and other brand
partners are now able to issue digital tokens (blockchain assets) in direct proportion to the physical shipments of TENCEL™ and LENZING™ ECOVERO™ branded fibers. These digital tokens provide a unique “fingerprint” and authentication mechanism, preventing adulteration, providing a more secure, trustworthy, digital chain-of custody across the entire textile supply chain, and most importantly, ensuring the materials are sustainably produced.

Neonyt geht wieder „on air“ – keine physische Winterausgabe im Januar 2021 (c) Messe Frankfurt
Tempoelhof Berlin, Neonyt 01/2020
04.11.2020

Neonyt geht wieder „on air“ – keine physische Winterausgabe im Januar 2021

  • Die anhaltend schwierige Lage rund um Covid-19 und die aktuellen Beschlüsse der Bundesregierung machen die Planungen für die Neonyt erneut unmöglich – das physische Event, vom 19. bis 21. Januar 2021, findet nicht statt.
  • Ein kleiner Trost: Das digitale Community-Format „Neonyt on Air“ geht dafür in die zweite Runde.

Nachdem sich die Lage rund um Covid-19 vielerorts über den Spätsommer weitestgehend entspannte und Kontaktverbote sowie Reisebeschränkungen gelockert oder gänzlich aufgehoben wurden, stand für die gesamte Industrie und damit auch die Messe- und Eventbranche ein Neustart an: „Von „business as usual“ konnte zwar keiner sprechen, aber wir haben gehofft, dass es keinen zweiten Lockdown geben wird,“ sagt Olaf Schmidt, Vice President Textiles & Textile Technologies der Messe Frankfurt.

  • Die anhaltend schwierige Lage rund um Covid-19 und die aktuellen Beschlüsse der Bundesregierung machen die Planungen für die Neonyt erneut unmöglich – das physische Event, vom 19. bis 21. Januar 2021, findet nicht statt.
  • Ein kleiner Trost: Das digitale Community-Format „Neonyt on Air“ geht dafür in die zweite Runde.

Nachdem sich die Lage rund um Covid-19 vielerorts über den Spätsommer weitestgehend entspannte und Kontaktverbote sowie Reisebeschränkungen gelockert oder gänzlich aufgehoben wurden, stand für die gesamte Industrie und damit auch die Messe- und Eventbranche ein Neustart an: „Von „business as usual“ konnte zwar keiner sprechen, aber wir haben gehofft, dass es keinen zweiten Lockdown geben wird,“ sagt Olaf Schmidt, Vice President Textiles & Textile Technologies der Messe Frankfurt. „Doch genau vor diesem Szenario stehen wir nun wieder und mussten im Sinne unserer Aussteller, Besucher und auch Mitarbeiter entscheiden.“ Aufgrund der weiterhin steigenden Infektionszahlen und der aktuellen Beschlüsse der Bundesregierung gibt es für den Messeveranstalter keine andere Möglichkeit, als die Winterausgabe der Neonyt abzusagen.

Restlos auf die Neonyt verzichten, muss die Sustainability-Community jedoch nicht. „Das Bedürfnis unserer Aussteller und Besucher, sich auszutauschen und zu kooperieren, hat sich in den vergangenen Monaten nur verstärkt,“ sagt Thimo Schwenzfeier, Show Director Neonyt. „Ein Bedürfnis, das wir nach einem Jahr Zwangspause nur allzu gern vor Ort und face-to-face erfüllt hätten, nun tun wir es in reduzierter Form virtuell.“ Analog zum vergangenen Sommer wird es auch im Januar wieder das digitale Format „Neonyt on Air“ geben – in zahlreichen Talks, Panel Discussions und Master Classes diskutiert die Community in der Woche vom 18. bis 22. Januar 2021 über die neusten Entwicklungen und Innovationen der nachhaltigen Mode- und Textilbranche. Nähere Informationen zum Rahmenprogramm folgen in den kommenden Wochen peu à peu auf der Neonyt-Website und im Newsletter.

Auch das Order-Business der Aussteller wird in den angepassten Plänen berücksichtigt: Durch die erneute Kooperation der Neonyt mit dem B2B-Marketplace „The Brand Show Circular“ haben die Brands die Möglichkeit, sich trotz Kontaktverboten und Reisebeschränkungen in einem internationalen Umfeld zu platzieren, bestehende Geschäftskontakte zu pflegen und Neukunden zu gewinnen. Die digitalen Services der B2B-Plattform reichen von klassischen Marketing- und Order-Tätigkeiten bis hin zu virtuellen Showrooms mit multimedialem Content. Interessierte Aussteller wurden bereits vollumfänglich über die Konditionen einer Zusammenarbeit informiert.

Lenzing reports improved results in the third quarter and remains strategically on course (c) Lenzing
Lenzing reports improved results in the third quarter and remains strategically on course
04.11.2020

Lenzing reports improved results in the third quarter and remains strategically on course

  • Significant improvement in the third quarter after COVID-19-related slump on the fiber market
  • Measures for structural earnings improvement with positive impact
  • Strategic investment projects remain on track
  • Hygiene Austria joint venture: Successful growth and continued focus on certified protective masks
  • Lenzing wins the Austrian State Prize for Innovation with LENZING™ Web Technology

Lenzing – In the first three quarters of 2020, the Lenzing Group successfully responded to the extremely difficult market environment of increased pressure on prices and volume due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The cooperation with partners along the value chains was intensified and Lenzing was agile and flexible in adjusting production volume to demand.

  • Significant improvement in the third quarter after COVID-19-related slump on the fiber market
  • Measures for structural earnings improvement with positive impact
  • Strategic investment projects remain on track
  • Hygiene Austria joint venture: Successful growth and continued focus on certified protective masks
  • Lenzing wins the Austrian State Prize for Innovation with LENZING™ Web Technology

Lenzing – In the first three quarters of 2020, the Lenzing Group successfully responded to the extremely difficult market environment of increased pressure on prices and volume due to the COVID-19 crisis by implementing a broad package of measures and remains fully on track in terms of its strategy. The cooperation with partners along the value chains was intensified and Lenzing was agile and flexible in adjusting production volume to demand. In addition, Lenzing also intensified measures for structural earnings improvement to mitigate the effect of the pressure on fiber prices and demand for fibers, and reduced its operating costs significantly as a result.

Please read the attached document for more information

Source:

Lenzing Aktiengesellschaft

03.11.2020

JEC WORLD announces new 2021 Dates

  • New digital platform unveiled
  • Due to the continued impact of the Covid-19 pandemic and after thorough consultation of clients and partners, the JEC World team today announces that the next edition of JEC World is postponed from March 9 to 11 to June 1 to 3, 2021.

With the growing concern among our exhibitors and partners surrounding the critical situation of the Covid  19,  travel  restrictions,  quarantine,  and  lockdown  measures  announced  recently  in  many  countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in safer conditions in 2021.

  • New digital platform unveiled
  • Due to the continued impact of the Covid-19 pandemic and after thorough consultation of clients and partners, the JEC World team today announces that the next edition of JEC World is postponed from March 9 to 11 to June 1 to 3, 2021.

With the growing concern among our exhibitors and partners surrounding the critical situation of the Covid  19,  travel  restrictions,  quarantine,  and  lockdown  measures  announced  recently  in  many  countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in safer conditions in 2021.

Thus, JEC World exhibitors answered a survey proposing three dates to determine which one would suit  them  the  most.  It  appeared  that  a  large  majority  of  respondents  favored  holding  the  next  JEC  World session from June 1 to 3, 2021."We truly regret having to make this difficult decision. However, we are all committed, starting todayto deliver the best JEC World experience to our clients.  We look forward to welcoming the international composites community back to Paris in June 2021", says Eric Pierrejean, CEO of JEC Group. As the leading trade show of the composites industry, JEC World brings together the whole composites materials  value  chain  and  professionals  from  application  sectors,  experts  from  the  scientific  and  academic world, associations and media from more than 112 countries.

JEC  World  is  also  proud  to  introduce  its  audience  this  year,  its  new  digital  platform,  JEC  World  Augmented.

This online platform, programmed to take place alongside JEC World,istailored primarily for attendees who cannot be present physically at the show but still want to experience a tremendousdigital event immersion. "JEC  World  and  its  augmented platform  will  bring  the  international  composites  community  and  specialists   together   to   network   with   exhibitors,   hold   digital   business   meetings,   access   online   conferences, workshops, and discover the latest composites innovation,"  says Adeline Larroque, Show director and EMEA events. "Now, more than ever, the international composites sector needs to come together to discuss today's challenges and tomorrow's composites solutions," adds Larroque.

Source:

JEC Group

 OETI präsentiert: “INSPECTED QUALITY für Mund-Nasen Masken” @ OETI
INSPECTED QUALITY für MUND-NASEN MASKEN
02.11.2020

OETI präsentiert: “INSPECTED QUALITY für Mund-Nasen Masken”

  • viel mehr als eine zuverlässige Produktkennzeichnung
  • Neues Label für Mund-Nasen-Masken (Community Masks)

Mit “INSPECTED QUALITY für MUND-NASEN MASKEN“ bietet OETI seit kurzem eine zuverlässige Produktkennzeichnung und unterstützt Unternehmen dabei parallel in der Produktentwicklung.

Mit dem Label “INSPECTED QUALITY für MUND-NASEN MASKEN“ werden Masken auf Funktionalität und Schadstoffe geprüft. Das Label basiert auf den Vorgaben des Workshop-Agreements CWA 17553. Beim Agreement handelt es sich um einen Leitfaden für Mindest-Anforderungen sowie Prüf- und Verwendungs-methoden von sogenannten „Community Masks“. Er wurde im Juni 2020 vom unabhängigen Europäischen Komitee für Normung (insgesamt 34 CEN-Mitgliedsstaaten) herausgegeben.

Damit stellt das OETI Geschäftskunden sowie Verbrauchern ein zuverlässiges Label zur Verfügung, welchem die Sicherheit eines unabhängigen, von externer Stelle erstellten Workshop-Agreements zu Grunde liegt.

Herausforderungen im Produktionsprozess

  • viel mehr als eine zuverlässige Produktkennzeichnung
  • Neues Label für Mund-Nasen-Masken (Community Masks)

Mit “INSPECTED QUALITY für MUND-NASEN MASKEN“ bietet OETI seit kurzem eine zuverlässige Produktkennzeichnung und unterstützt Unternehmen dabei parallel in der Produktentwicklung.

Mit dem Label “INSPECTED QUALITY für MUND-NASEN MASKEN“ werden Masken auf Funktionalität und Schadstoffe geprüft. Das Label basiert auf den Vorgaben des Workshop-Agreements CWA 17553. Beim Agreement handelt es sich um einen Leitfaden für Mindest-Anforderungen sowie Prüf- und Verwendungs-methoden von sogenannten „Community Masks“. Er wurde im Juni 2020 vom unabhängigen Europäischen Komitee für Normung (insgesamt 34 CEN-Mitgliedsstaaten) herausgegeben.

Damit stellt das OETI Geschäftskunden sowie Verbrauchern ein zuverlässiges Label zur Verfügung, welchem die Sicherheit eines unabhängigen, von externer Stelle erstellten Workshop-Agreements zu Grunde liegt.

Herausforderungen im Produktionsprozess

Unsere Erfahrungswerte im Testen von Community Masks, zeigten, dass bei den zwei wichtigsten Produkteigenschaften Filtrationseffizienz und Atmungsaktivität, derzeit nur 10% der getesteten Masken alle Anforderungen erfüllen. Daher ist es wichtig jede einzelne Entwicklungs-Phase zu testen, um sicher zu stellen, dass das Endprodukt die Anforderungen erfüllt. Eine Neu-Entwicklung ist zeitaufwändig und teuer. Darüber hinaus sind die dazu benötigten Prüfgeräte teuer.

OETI’s Know-how im Entwicklungsprozess

Das OETI testet daher die einzelnen Phasen des Entwicklungsprozesses für Geschäftskunden, damit die richtige Wahl für Materialen und die bei der Herstellung der Masken verwendeten Prozesse getroffen werden kann. Großer Vorteil dabei ist, dass Teile des Produktes, die bereits während des Entwicklungsprozesses getestet wurden und die Anforderungen nachweislich erfüllen, nicht erneut getestet werden müssen. Auch werden – abhängig von der Art der Zertifizierung – vorzertifizierte Teile des Produkts ebenfalls anerkannt (z.B. STANDARD 100 by OEKO-TEX®)

Was wird getestet und welche Art von Masken werden getestet?

“INSPECTED QUALITY FÜR MUND-NASEN MASKEN” legt, zum einen, bestimmte Kriterien zum Schutz des Trägers vor Schadstoffen fest. Zweitens hilft es, die orale Übertragung zu verringern, indem verhindert wird, dass das Virus durch kontaminierte Hände in Nase oder Mund gelangt. Abschließend trägt die gemäß CWA 17553 getestete Maske dazu bei, das Risiko andere durch Sprechen, Niesen und Husten zu infizieren zu verringern.

Die Zertifizierung umfasst Funktionstests wie Atmungsaktivität oder Schrumpfverhalten sowie Tests auf Schadstoffe wie Formaldehyd und verbotene Arylamine.

Die Kennzeichnung gilt für alle Einweg- und wiederverwendbaren Mund-Nasen-Masken, die nicht unter die Vorschriften für Schutzausrüstung oder Medizinprodukte fallen.

Hans-Jürgen Schmidt (links), Geschäftsführer von DORNIER, und Lars Öller (rechts), Leitung Technologiezentrum Webmaschinen (c) CF
Hans-Jürgen Schmidt (links), Geschäftsführer von DORNIER, und Lars Öller (rechts), Leitung Technologiezentrum Webmaschinen
28.10.2020

Lindauer DORNIER initiiert Entwicklung von wiederverwendbaren Masken an den DITF

  • Fertigung von One Piece Masks aus Präzisionsgewebe in Jacquard-Webtechnik

Angestoßen durch den Webmaschinenhersteller Lindauer DORNIER, starten die Deutschen Institute für Textil- und Faserforschung Denkendorf (DITF) ein Projekt zur Entwicklung wiederverwendbarer, medizinischer Gesichtsmasken auf Basis hochpräziser Luftdüsen-Webtechnik. Das Vorhaben schafft die Voraussetzungen, um zusammen mit namhaften Industriepartnern aus der Region und dem Hohenstein Institut für Textilinnovation gGmbH innerhalb von 4-6 Monaten die Entwicklung, Prüfung, Zulassung, Anlaufproduktion und den Reinigungsservice für wiederverwendbare medizinische Gesichtsmasken aufzubauen. Das Projekt wurde zusammen mit zwei weiteren herausragenden Corona-Projekten aus 120 landesweit eingereichten Anträgen ausgewählt und wird mit 195 000 Euro durch das Ministerium für Wirtschaft, Arbeit und Wohnungsbau unterstützt.

  • Fertigung von One Piece Masks aus Präzisionsgewebe in Jacquard-Webtechnik

Angestoßen durch den Webmaschinenhersteller Lindauer DORNIER, starten die Deutschen Institute für Textil- und Faserforschung Denkendorf (DITF) ein Projekt zur Entwicklung wiederverwendbarer, medizinischer Gesichtsmasken auf Basis hochpräziser Luftdüsen-Webtechnik. Das Vorhaben schafft die Voraussetzungen, um zusammen mit namhaften Industriepartnern aus der Region und dem Hohenstein Institut für Textilinnovation gGmbH innerhalb von 4-6 Monaten die Entwicklung, Prüfung, Zulassung, Anlaufproduktion und den Reinigungsservice für wiederverwendbare medizinische Gesichtsmasken aufzubauen. Das Projekt wurde zusammen mit zwei weiteren herausragenden Corona-Projekten aus 120 landesweit eingereichten Anträgen ausgewählt und wird mit 195 000 Euro durch das Ministerium für Wirtschaft, Arbeit und Wohnungsbau unterstützt.

Das nun bewilligte Projekt unter Leitung von Dr. Hans Jürgen Bauder, Bereichsleiter Webtechnologien an den DITF, adressiert diese Anforderungen mit einem völlig neuen Fertigungsansatz: Während die gängigen Schutzmasken aus Vliesstoff hergestellt und nach einmaligem Gebrauch weggeworfen werden, setzen die Denkendorfer Forscher auf „konfektionsfreie“ One Piece Masks aus leistungsfähigem Präzisionsgewebe in Jacquard-Webtechnik und schaffen ergänzend die Voraussetzung zur Mehrfachverwendung, um Abfall zu sparen und Lieferengpässe zu vermeiden. Es wird ein innovatives Herstellungskonzept für flexibel anpassbare Masken mit deutlich verbessertem Tragekomfort und damit auch höherer Schutzfunktion realisiert. Die Herstellkosten liegen nach erster Kalkulation bei 6-8 Cent/Maske und bieten damit eine realistische Grundlage für die Massenproduktion.

Für das ambitionierte Vorhaben nutzen die DITF modernste Technik verbundener Textilmaschinenbauer und Textilhersteller: Lindauer Dornier stellt die benötigten Luftdüsenwebmaschinen zur Verfügung, die Stäubli AG ist Projektpartner für die Jacquardwebtechnik. Für die aufwendige Herstellung des Kettbaums und das Einziehen der Kettfäden hat Global Safety Textiles Unterstützung zugesagt. Die Firma TWD-Fibres liefert für die Prototypen und die Anlaufproduktion antimikrobielle Filamentgarne und Texturgarne. Parallel werden aus den DITF Technika voraussichtlich auch sogenannte Splittfasern, die eine erhöhte Abscheideleistung begünstigen und fast so fein sind wie die Fasern für Masken aus Meltblow-Vliesstoff, eingesetzt.

Die medizinischen Gesichtsmasken müssen nicht steril, aber zwingend keimarm (desinfiziert) sein. Projektpartner ist deshalb auch das Reinigungsunternehmen Textilpflege Mayer, das sich dieser Aufgabe annimmt und für die Bewertung der Masken mit dem Ortenau Klinikum in Offenburg zusammenarbeitet. Die Prüfung der Masken nach den Vorgaben der EN 14683 führt das Hohenstein Institut für Textilinnovation gGmbH durch.

Der Fokus im Projekt liegt im technischen Design der gewebten Gesichtsmaske, das den 15 Textilunternehmen in Europa, die insgesamt mehr als 200 Jaquard-Webmaschinen betreiben, für die Herstellung zur Verfügung gestellt werden soll. Die Fertigungseinstellungen der an den DITF entwickelten Masken können sofort auf bestehende Produktions-anlagen übertragen werden. Damit wären die 15 Webereien kurzfristig in der Lage, zusammen über 2 Millionen Masken pro Tag herzustellen – ein nennenswerter Beitrag für die weitere Stabilisierung der Versorgungslage mit Schutzmasken.

 

Weitere Informationen finden Sie im Anhang

More information:
DITF Dornier Masken Covid-19
Source:

DITF

Rieter Investor Update 2020 (c) Rieter Management AG
Rieter Investor Update 2020
23.10.2020

Rieter Investor Update 2020

  • Significant recovery in order intake in third quarter 2020
  • Order intake of CHF 425.1 million after nine months
  • COVID crisis management in place
  • Continuous implementation of the strategy
  • Outlook 2020

The market recovery, which Rieter reported in June 2020, has continued. This is reflected in capacity utilization at spinning mills worldwide, which Rieter monitors. In April 2020, the proportion of producing spinning mills was around 40% while at the end of September 2020 this was around 90%. Against this backdrop, the Rieter Group increased order intake in the third quarter of 2020 to CHF 174.4 million (2nd quarter 2020: CHF 45.7 million). In the first nine months of 2020, the Rieter Group achieved a cumulative order intake of CHF 425.1 million (2019: CHF 524.5 million). Compared to the previous year period, this represents a decline of 19%.

Order Intake by Business Group

  • Significant recovery in order intake in third quarter 2020
  • Order intake of CHF 425.1 million after nine months
  • COVID crisis management in place
  • Continuous implementation of the strategy
  • Outlook 2020

The market recovery, which Rieter reported in June 2020, has continued. This is reflected in capacity utilization at spinning mills worldwide, which Rieter monitors. In April 2020, the proportion of producing spinning mills was around 40% while at the end of September 2020 this was around 90%. Against this backdrop, the Rieter Group increased order intake in the third quarter of 2020 to CHF 174.4 million (2nd quarter 2020: CHF 45.7 million). In the first nine months of 2020, the Rieter Group achieved a cumulative order intake of CHF 425.1 million (2019: CHF 524.5 million). Compared to the previous year period, this represents a decline of 19%.

Order Intake by Business Group

Due to the positive development in the third quarter of 2020, order intake at the Business Group Machines & Systems reached a total of CHF 234.5 million in the first nine months. The reason for the relatively small decline of 8% compared to the previous year is that the new machinery business was already characterized by investment restraint in the first three quarters of the year 2019. The Business Group Components recorded a reduction of 33% to CHF 116.6 million while the Business Group After Sales posted an order intake of CHF 74.0 million, a decrease of 23%. This illustrates the effects of low capacity utilization at the spinning mills, especially in the second quarter of 2020 as a result of the COVID-19 pandemic. The order backlog as of September 30, 2020, was around CHF 515 million (September 30, 2019: CHF 285 million). Cancellations were in the normal range of around 5%.

COVID Crisis Management in Place

Rieter has quickly implemented comprehensive COVID crisis management. Priority is being given to protecting employees, fulfilling customer commitments and ensuring liquidity. The necessary measures to protect employees have been implemented worldwide and the order backlog is being processed largely as planned. Rieter has introduced 40% short-time working in Switzerland and Germany for the second half of 2020. Similar measures were implemented worldwide within the scope of the available legal options. As of September 30, 2020, Rieter had liquid funds of CHF 216.7 million and unused credit lines in the mid three-digit million range in order to ensure liquidity. At the end of September 2020, net debt of CHF 1.2 million was disclosed.

Continuous Implementation of the Strategy

In recent years, Rieter has consistently implemented the strategy with the focus on innovation leadership, strengthening the business on the installed base and optimization of the costs. The company intends to forge ahead with the strategy in the coming months in order to strengthen the market position for the time after the COVID-19 pandemic. The Rieter CAMPUS is an important element of Rieter’s innovation strategy. Depending on the business situation, construction work is due to begin in the first half of 2021.

Outlook 2020

As already announced, in terms of sales and profitability Rieter expects a stronger second half of the year compared to the first half of 2020. Nevertheless, due to the deferral of deliveries by customers, Rieter will also conclude the second half of the year − and thus the full year 2020 − with a net loss. Due to the existing uncertainties, it continues to be difficult to forecast sales and profitability for the second half of 2020. For this reason, Rieter refrains from providing more specific information for the full year 2020.

More information:
Rieter Holding Ltd. Covid-19
Source:

Rieter Management AG

Wärmebild eines Laserdruckers [rechts] im Vergleich zu einem Inkjetdrucker [links] (c) Epson
Wärmebild eines Laserdruckers [rechts] im Vergleich zu einem Inkjetdrucker [links]
19.10.2020

Epson: Nachhaltig auf- und ausbauen

Epson befragte im Sommer 2020 in einer europaweiten Umfrage mehr als 4.000 Menschen zu ihren Ansichten und Erwartungen über nachhaltiges Verhalten von Unternehmen und wie dies zu einer schnelleren Erholung von der Covid-Pandemie führen kann. Ein auffallendes Resultat der Erhebung ist, dass sich die Wünsche der Verbraucher und Angestellten nach umweltfreundlichen Strategien der Marken nochmals deutlich erhöht haben. Dabei wurde ebenfalls klar, dass die große Mehrheit der Befragten (75 Prozent) nachhaltig wirtschaftende Firmen sowohl als Kunden als auch als Mitarbeiter bevorzugen.

Der Bericht stellt ebenso heraus, dass rund 71 Prozent der befragten Mitarbeiter die Verantwortung ihres Unternehmens gegenüber sozialen und Umweltthemen für wichtig oder sehr wichtig halten. Weitere 78 Prozent sind der Meinung, dass eine tragfähige Strategie die Wahrnehmung einer Marke positiv beeinflusst und die Markentreue spürbar verbessert. Knapp zwei Drittel meinen zudem, dass diese Themen nach Covid-19 nochmals an Bedeutung gewinnen werden.

Epson befragte im Sommer 2020 in einer europaweiten Umfrage mehr als 4.000 Menschen zu ihren Ansichten und Erwartungen über nachhaltiges Verhalten von Unternehmen und wie dies zu einer schnelleren Erholung von der Covid-Pandemie führen kann. Ein auffallendes Resultat der Erhebung ist, dass sich die Wünsche der Verbraucher und Angestellten nach umweltfreundlichen Strategien der Marken nochmals deutlich erhöht haben. Dabei wurde ebenfalls klar, dass die große Mehrheit der Befragten (75 Prozent) nachhaltig wirtschaftende Firmen sowohl als Kunden als auch als Mitarbeiter bevorzugen.

Der Bericht stellt ebenso heraus, dass rund 71 Prozent der befragten Mitarbeiter die Verantwortung ihres Unternehmens gegenüber sozialen und Umweltthemen für wichtig oder sehr wichtig halten. Weitere 78 Prozent sind der Meinung, dass eine tragfähige Strategie die Wahrnehmung einer Marke positiv beeinflusst und die Markentreue spürbar verbessert. Knapp zwei Drittel meinen zudem, dass diese Themen nach Covid-19 nochmals an Bedeutung gewinnen werden.

Jörn von Ahlen, Leiter Marketing der Epson Deutschland GmbH, sagt dazu: „Nachhaltiges Wirtschaften und stromsparende Technologien gehören zur DNA von Epson. So blicken wir als Unternehmen bereits auf Jahrzehnte von hohem Engagement im Segment CSR zurück. Wir wissen bereits aus dem Feedback von Kunden und Handelspartnern, dass die Sensibilität gegenüber Umwelt- und Sozialthemen in den vergangenen Jahren deutlich gestiegen ist. Heute sind es nicht mehr vorwiegend die öffentlichen Auftraggeber oder große Firmen, die besonderes Gewicht auf Nachhaltigkeit legen. Gerade auch der Mittelstand erkennt verstärkt eine Chance, sich hier positiv und äußerst engagiert im Markt zu positionieren. Epson bietet allen diesen Firmen mit seinen umweltfreundlichen, stromsparenden IT-Lösungen einen Königsweg an, sowohl den Stromverbrauch und den CO2-Ausstoß zu senken als auch moderne, leistungsfähige Lösungen auch für die neue Arbeitswelt nach Covid-19 einzusetzen.“

Covid-19 hat dabei viele bislang latent vorhandene Trends beschleunigt. Einer davon ist der Übergang zu flexibleren Arbeitsumgebungen in Firmen aller Größenordnungen. Die Ergebnisse der Epson Umfrage zeigen auch, dass es entscheidend für den Erfolg sein wird, wie sich Unternehmen auf die Rückkehr zu einem normalen Betrieb vorbereiten werden.

Source:

Epson Deutschland GmbH

Regional-Hero-Gründer Pascal Schreiber (c) Kopf & Kragen Fotografie
Regional-Hero-Gründer Pascal Schreiber
19.10.2020

Aktion zur Rettung des Einzelhandels: PRENZL LATE NIGHT am 30. Oktober

Am 30. Oktober findet von 18 bis 23 Uhr zwischen Stargarder Straße und Helmholtzplatz im Prenzlauer Berg die PRENZL LATE NIGHT statt. In über 20 teilnehmenden Geschäften und Gastronomiebetrieben können Shopping- und Gastronomie-Fans nach Herzenslust shoppen und sich verköstigen lassen. Das Event findet unter voller Berücksichtigung der aktuellen Corona-Maßnahmen und in enger Abstimmung mit dem Gesundheitsamt Pankow statt.

Das Ziel der Aktion: Die teilnehmenden Geschäfte und Restaurants einem größeren Publikum bekannt zu machen, damit sie zumindest einen kleinen Teil der durch Corona entstandenen Verluste wieder wettmachen können.

Organisiert und beworben wird das Event von „Regional Hero“, dem Erfinder von „DAS B Card“ und den Fashion-Concept-Stores „Victoria met Albert” und “Albert”. Das B Card ist ein Gutschein, mit dem speziell der inhabergeführte Einzelhandel und lokale Gastronomie unterstützt wird.

Am 30. Oktober findet von 18 bis 23 Uhr zwischen Stargarder Straße und Helmholtzplatz im Prenzlauer Berg die PRENZL LATE NIGHT statt. In über 20 teilnehmenden Geschäften und Gastronomiebetrieben können Shopping- und Gastronomie-Fans nach Herzenslust shoppen und sich verköstigen lassen. Das Event findet unter voller Berücksichtigung der aktuellen Corona-Maßnahmen und in enger Abstimmung mit dem Gesundheitsamt Pankow statt.

Das Ziel der Aktion: Die teilnehmenden Geschäfte und Restaurants einem größeren Publikum bekannt zu machen, damit sie zumindest einen kleinen Teil der durch Corona entstandenen Verluste wieder wettmachen können.

Organisiert und beworben wird das Event von „Regional Hero“, dem Erfinder von „DAS B Card“ und den Fashion-Concept-Stores „Victoria met Albert” und “Albert”. Das B Card ist ein Gutschein, mit dem speziell der inhabergeführte Einzelhandel und lokale Gastronomie unterstützt wird.

„Uns geht es darum, Lieblingsorte im Prenzlauer Berg zu stärken“, sagt Regional-Hero-Gründer Pascal Schreiber. „Natürlich gibt es ein ausgefeiltes Hygiene-Konzept, das stets an die aktuellen Anforderungen angepasst wird. Uns ist es wichtig, regionale Geschäfte und Restaurants gerade in diesen schwierigen Zeiten zu helfen.“

Source:

Regional Hero

Oerlikon (c) Oerlikon
f.l.t.r Jochen Adler, Ralf Morgenroth, Markus Reichwein, Matthias Schmitz
15.10.2020

Oerlikon Experts share their know-how online

In order to ensure the transfer of know-how and technology in times of the pandemic, the Manmade Fibers segment of the Swiss Oerlikon Group will start its new webinar series in November. Four interesting technology lectures are planned until the end of 2020 which will be held in English. Current trends in the production of manmade fibers as well as Oerlikons technology solutions will be presented and discussed with the participants. A continuation of the webinar series is already planned for 2021.

In order to ensure the transfer of know-how and technology in times of the pandemic, the Manmade Fibers segment of the Swiss Oerlikon Group will start its new webinar series in November. Four interesting technology lectures are planned until the end of 2020 which will be held in English. Current trends in the production of manmade fibers as well as Oerlikons technology solutions will be presented and discussed with the participants. A continuation of the webinar series is already planned for 2021.

  • Factory know-how from a single source – A boost for your efficiency
    4. November 2020: 11:00-11:45h CET
    Speaker: Jochen Adler, Oerlikon Manmade Fibers CTO*
     
  • VarioFil – Your compact spinning solution
    11. November 2020: 11:00-11:45h CET
    Speaker: Ralf Morgenroth, Head of Engineering Textile Machinery BB Engineering (BBE)*
     
  • Green Technologies – Join us on the road to a sustainable fiber industry
    2. December 2020: 11:00-11:45h CET
    Speaker: Markus Reichwein, Head of Product Management Oerlikon Manmade Fibers*
     
  • VacuFil – Your future upcycling plant, from waste to value
    9. December 2020: 11:00-11:45h CET
    Speaker: Matthias Schmitz, Head of Engineering Recycling Technology, BB Engineering (BBE)*

 

*Please read the attached document for more information

Source:

Oerlikon Textile GmbH & Co. KG

Anker Carpet (c) Anker
13.10.2020

Anker, Devan and Shark Solutions develop flame retardant aviation carpet

Anker, Devan and Shark Solutions teamed up to create the world’s first flame retardant aviation carpet using a recycled binder. Inspired by the knowledge and the needs of the aviation market, Anker motivated to achieve this new goal together. The PVB binder reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill.

German carpet manufacturer Anker is the first company to offer flame retardant carpets for aviation that are made with a recycled binder. In the search for a more sustainable binder, Anker discovered the PVB from Shark Solutions, a Danish cleantech company focused on giving a new life to post-consumer PVB. Properties of the aviation carpet with PVB as binder are the same as those of traditional non-sustainable carpets. The market has been looking for this type of solutions for a long time and market introduction has already started. Anker will introduce well known and special developed styles of aviation carpets with PVB and plan to take out traditional non-sustainable aviation carpets stepwise as soon as possible.

Anker, Devan and Shark Solutions teamed up to create the world’s first flame retardant aviation carpet using a recycled binder. Inspired by the knowledge and the needs of the aviation market, Anker motivated to achieve this new goal together. The PVB binder reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill.

German carpet manufacturer Anker is the first company to offer flame retardant carpets for aviation that are made with a recycled binder. In the search for a more sustainable binder, Anker discovered the PVB from Shark Solutions, a Danish cleantech company focused on giving a new life to post-consumer PVB. Properties of the aviation carpet with PVB as binder are the same as those of traditional non-sustainable carpets. The market has been looking for this type of solutions for a long time and market introduction has already started. Anker will introduce well known and special developed styles of aviation carpets with PVB and plan to take out traditional non-sustainable aviation carpets stepwise as soon as possible.

Shark’s PVB reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill. The non-toxic binder (no chlorine or phthalates) is fully recyclable and thus lives up to the future standards of the industry.

Textile innovator Devan Chemicals, known for its tailor-made flame retardant solutions, was called in to develop the flame retardant back coating, which is compliant with the Airbus and Boeing safety standards. “Based on many years of experience and competences in customer related developments, improving recycling rates is getting more and more important”, says Dirk Vanpachtenbeke, R&D manager Flame Retardants at Devan. “We are very proud that, together with Anker and Shark Solutions, we can contribute to this rising demand for products that meet the standards of a circular economy solution.”

In other news, Anker and Devan are already working on a new project, which includes Devan’s antimicrobial/viral-reducing technology. Recently, Devan published test results on the activity of their technology (BI-OME®) against SARS-CoV-2 and other viruses. According to independent testing, BI-OME is proven to achieve 99% and higher virus reduction, including of SARS-COV-2, on samples before washing and retains 98.5% even after 25 wash cycles. This technology has been recognized with the 2020 European Technology Innovation Leadership Award by Frost & Sullivan.

Source:

Devan Chemicals NV / Marketing Solutions NV

Oerlikon: Virtual Exhibition (c) Oerlikon
08.10.2020

Oerlikon at Innovate Textile & Apparel Virtual Trade Show

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

"Reconnecting innovation in the textile & apparel value chain" is the motto of WTIN's virtual trade show. And Oerlikon intends to more than live up to this motto. With more than 50 active experts from sales, customer service and technology as well as partners from its international network of representatives, the Manmade Fibers segment of the Swiss Oerlikon Group will try to be represented around the clock. "It is an interesting experiment for all of us and we would like to see it succeed," explains André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs. "Our aim is to meet our existing customers again, make new contacts and see 'old friends' from the industry. We have prepared an attractive digital offer for them all. Those of you who missed our roller coaster ride in Barcelona last year can now enjoy the journey through time in peace and quiet from your home office on your digital tour of the fair. And, there are no more waiting times either," promises Wissenberg.

Factory know-how from a single source
From Melt to Yarn, Fibers and Nonwovens. From the polycondensation and the processing of PTA and MEG as well as the extrusion of, for example, recycled polyester chips all the way through to hundreds of thousands of packaged and stored or directly-delivered textured bobbins for a market within the textile industry worth billions. From the planning and construction of highly complex production plants to the engineering of large-scale plant projects and competent customer services. This business model runs like a red thread through the self-conception of the Manmade Fibers segment of the Swiss Oerlikon Group. The right partner, especially – but not exclusively – for newcomers to the textile industry. "With us they get everything they need for a successful business: Factory know-how from a single source. And that's what we would like to show our visitors at our virtual trade fair booth," says Wissenberg.

With the PFAFF 4520, engineers and technicians from PFAFF have designed a full-automatic production line (CE compliant) for processing multi-layer disposable masks, which meets the requirements of "German engineering" in a unique way. (c) PFAFF
PFAFF 4520: Full-automatic mask production unit
05.10.2020

PFAFF 4520: Full-automatic mask production unit

With the PFAFF 4520, engineers and technicians from PFAFF have designed a full-automatic production line (CE compliant) for processing multi-layer disposable masks, which meets the requirements of "German engineering" in a unique way. The product combines 150 years of expertise in joining textile materials and a concentrated know-how of the PFAFF INDUSTRIAL and KSL brands in the areas of process control, automation and robotics.

The PFAFF 4520 is an investment in a robust and sophisticated production line (MADE IN GERMANY) with an exceptionally reliable working process. In times of Covid-19 it is so important to rely on the right equipment for the mask production and avoid costly readjustments or an unnecessary second investment!

Key facts of the unit:

With the PFAFF 4520, engineers and technicians from PFAFF have designed a full-automatic production line (CE compliant) for processing multi-layer disposable masks, which meets the requirements of "German engineering" in a unique way. The product combines 150 years of expertise in joining textile materials and a concentrated know-how of the PFAFF INDUSTRIAL and KSL brands in the areas of process control, automation and robotics.

The PFAFF 4520 is an investment in a robust and sophisticated production line (MADE IN GERMANY) with an exceptionally reliable working process. In times of Covid-19 it is so important to rely on the right equipment for the mask production and avoid costly readjustments or an unnecessary second investment!

Key facts of the unit:

-    Size of the mask: 175 x 95 mm
-    Output:  3,500 – 4,000 masks per hour
-    1-, 2- or 3 ply processing  (Non-woven/filtration fabric)
-    SPS (PLC) control of the entire mask system
-    Exceedingly quiet working process of the whole unit
-    Ultrasonic welding components from German manufacturers
-    Protective housing for occupational safety of the operator
-    Packing station + printing station for personalized masks (on request)

The machine package also includes important features in the pre- and after sales:

PFAFF technicians ensure the adjustment of the desired customer material (non-woven or similar filter material) and the number of layers (1-, 2-, 3-ply) to the machine and make a "Ready to production" installation of the whole unit at the customer.  A fast service response time in after-sales (by involvement of the PFAFF sales- and service partner on site) ensures a maximum production output.