Aus der Branche

Zurücksetzen
7 Ergebnisse
28.07.2023

RadiciGroup: Bibs made from recyclable materials for UCI Cycling World Championships

On the occasion of the 2023 UCI Cycling World Championships, the Union Cycliste Internationale chose Santini to make the bibs from recyclable materials. The UCI's partner brought together a pool of companies, all in the Bergamo area (Italy): RadiciGroup, Sitip, EFI Reggiani and Acerbis.

In 2022, the Union Cycliste Internationale released the UCI Climate Action Charter, which lays out an action plan to advance the environmental sustainability of the sport with a specific principle to reduce waste and accelerate the transition to a circular economy. This year, the UCI Cycling World Championships, which will be held from 3 to 13 August, are bringing together most of the cycling disciplines in a single location: Glasgow and across Scotland.

On the occasion of the 2023 UCI Cycling World Championships, the Union Cycliste Internationale chose Santini to make the bibs from recyclable materials. The UCI's partner brought together a pool of companies, all in the Bergamo area (Italy): RadiciGroup, Sitip, EFI Reggiani and Acerbis.

In 2022, the Union Cycliste Internationale released the UCI Climate Action Charter, which lays out an action plan to advance the environmental sustainability of the sport with a specific principle to reduce waste and accelerate the transition to a circular economy. This year, the UCI Cycling World Championships, which will be held from 3 to 13 August, are bringing together most of the cycling disciplines in a single location: Glasgow and across Scotland.

To mark the occasion, the UCI turned to its Official Partner, Santini, to make the bibs that the staff (judges, volunteers, commissaires etc.) and accredited photographers wear throughout the event. The bibs are "eco-designed", which means they are specifically created to have a second life after use. Once the event is over, the bibs could be collected and sent to RadiciGroup and transformed into new material, to be then processed by Acerbis to create X-Elite handguards for mountain bikes. This project is a concrete example of the circular economy at work, allowing 100% of the materials used to be recovered.

To optimise the production cycle of the bibs for the 2023 UCI Cycling World Championships, the products must be eco-friendly from the very first phase. The fabrics were therefore made from Italian nylon yarn produced by RadiciGroup. The choice of nylon – an infinitely recyclable thermoplastic material – is intertwined with UCI's sustainability goals for "limited-use" garments: RadiciGroup was able to channel its know-how and expertise in the field of chemistry to create "circular" bibs, working alongside the other partners. As the innovative yarn selected by RadiciGroup allows for easy and high-quality printing, the fabric is also customisable. The yarn is then provided to Sitip to create the "ARAS NG" warp-knitted fabric (95 g/100 m2): a recyclable single-fibre material made from 100% polyamide. The resulting fabric is the first nylon of its kind, designed to meet the transfer printing needs of the third project partner, EFI Reggiani, as well as the recyclability standards requested by RadiciGroup. The choice of fabric was born from extensive applied research, in which EFI Reggiani tested a wide range of fabrics to find the best colour results and the best resistance to rubbing and perspiration, which is vital for the bibs' intended use. In addition to using the new GOTS-certified EFI Reggiani IRIS Plus water-based inks, EFI Reggiani opted for a printing solution on transfer paper that does not consume water and requires a minimal amount of energy per square metre. Finally, the white fabric from Sitip and the transfer paper printed by EFI Reggiani arrived at Santini, who were responsible for transferring all the graphics for the 2023 UCI Cycling World Championships bibs from the paper onto the fabric. Santini also took care to assemble the garments using only thread and components made from nylon or chemically similar materials, allowing the bibs to enter the recycling process at the end of their lives without any further processing.                   

Quelle:

RadiciGroup

Photo: Radici
13.07.2022

RadiciGroup at Phygital Sustainability Expo in Rome

  • Commitment for a sustainable fashion industry

RadiciGroup participated in the third edition of PHYGITAL SUSTAINABILITY EXPO, which took place on 11 and 12 July in Rome. The event was focused on the ecological transition of fashion and design brands through technological innovation.

During the “narrated fashion show”, at the archaeological site of the Museo Dei Fori Imperiali, two sustainable garments by RadiciGroup were shown: the first completely recyclable ski suit made with recycled nylon and the Yamamay swimsuit made with polyester yarn obtained from recycling of plastic bottles.

  • Commitment for a sustainable fashion industry

RadiciGroup participated in the third edition of PHYGITAL SUSTAINABILITY EXPO, which took place on 11 and 12 July in Rome. The event was focused on the ecological transition of fashion and design brands through technological innovation.

During the “narrated fashion show”, at the archaeological site of the Museo Dei Fori Imperiali, two sustainable garments by RadiciGroup were shown: the first completely recyclable ski suit made with recycled nylon and the Yamamay swimsuit made with polyester yarn obtained from recycling of plastic bottles.

Yamamay chose the sustainable polyester yarn Repetable® by RadiciGroup, for its new green beachwear proposal, with the aim of combining beauty and sustainability. Repetable is an innovative polyester yarn obtained through a process of recycling plastic bottles. Compared to virgin polyester, Repetable allows lower CO2 emissions (-45%), lower water consumption (-90%) and lower energy consumption (-60%), while guaranteeing high performance. The new line “Edit” by Yamamay, which includes the swimsuit made with Repetable, has already been on the market since the end of last May.

The participation of RadiciGroup in the PHYGITAL SUSTAINABILITY EXPO represents further confirmation of the Group commitment to creating a fashion industry that is increasingly respectful of the environment, thanks to the involvement of all the players in the supply chain, which are most sensitive to sustainability.

Quelle:

RadiciGroup

RADICIGROUP
05.04.2022

RadiciGroup: A spacesuit for analogue Mars missions

  • RadiciGroup establishes a network of Italian textile excellence to create a spacesuit for analogue Mars missions
  • The Space Economy is launched in Bergamo. Mars Planet analogue astronauts to take part in the SMOPS Mars mission simulation wearing suits made of RadiciGroup yarn.

A group of companies in the Italian textile industry, headed by RadiciGroup, has created the first spacesuit for analogue simulation fully designed and engineered in Italy for the Space Medicine Operations (SMOPS) Mars mission. This endeavour was promoted and organized by Mars Planet – the Italian chapter of the Mars Society headquartered in the province of Bergamo – under the patronage of the Italian Space Agency.

The SMOPS analogue mission is mainly focused on space medicine: health monitoring of future astronauts and development of support technologies for the simulation of life in space and planet environments.

Quelle:

RADICIGROUP

27.01.2022

Radici Yarn certified to ISO 50001 Energy Management Systems

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

Over 400 employees work hard every day to improve the environmental performance of Radici Yarn’s site. Through teamwork and continuous improvement in energy efficiency, Radici Yarn has obtained ISO 50001 Energy Management Systems certification, which attests to the organization’s commitment to contain and progressively reduce energy consumption.

Radici Yarn, one of the companies in the RadiciGroup Advanced Textile Solutions Business Area, is engaged in the production and sale of polyamide 6 polymer, PA6 and PA66 continuous filament and staple yarn, and other synthetic fibres, including products made of recycled or bio-based materials.

All the processes - polymerization and spinning (Villa d'Ogna plant), as well as warping and draw-warping (Ardesio plant) - are run under constant monitoring with the goal of achieving maximum energy efficiency and lower consumption. Both sites are powered by two hydroelectric power plants owned by Geogreen, a RadiciGroup partner and energy supplier. The share of energy consumption from renewable sources and reduced environmental impact (natural gas) sources  is constantly increasing.

The energy issue has always been a priority for Radici Yarn, whose products serve numerous sectors, including automotive, clothing and furnishings.

"Already at the beginning of the 1990s, Radici Yarn started investing in cogeneration, the simultaneous production of electricity and steam,” pointed out Laura Ravasio, energy manager of Radici Yarn SpA. “We have recently started up an advanced trigeneration plant – a highly efficient system that produces not only electricity and steam, but also chilled water for our production processes. One of the first results recorded in 2021 was a 30% reduction in water consumption. Thus, ISO 50001 certification seemed like the next logical step to take in formalizing a long-term approach to energy.”

The ISO 50001 certification, which is voluntary and valid for a period of three years, was added to the ISO 14001 Environmental and ISO 9001 Quality Management system certifications previously achieved by Radici Yarn.

Quelle:

RadiciGroup

 Radici: Mehr Nachhaltigkeit auf der Piste (c) RadiciGroup
Die RadiciGroup und DKB präsentieren den ersten „zirkulären“ Skianzug
01.12.2021

Radici: Mehr Nachhaltigkeit auf der Piste

  • Die RadiciGroup und DKB präsentieren den ersten „zirkulären“ Skianzug
  • Der Anzug besteht aus recycelten und recyclingfähigen Garnen und erfordert keinerlei Abstriche bei Stil, Design und Gebrauchseigenschaften.
  • Athleten des Sci Club RadiciGroup sind die ersten Botschafter für dieses nachhaltige Projekt.

Der erste komplett nachhaltige Skianzug, mit starkem Fokus auf Stil und Design und vollständig neu konzipiert, ist jetzt Realität. Hinter der Entwicklung dieses hochinnovativen Kleidungsstücks stehen zwei herausragende Unternehmen aus dem Raum Bergamo: Die RadiciGroup, ein weltweit führender Hersteller von chemischen Zwischenprodukten, Polyamiden, hochleistungsfähigen Kunststoffcompounds und fortschrittlichen Textillösungen, sowie die auf funktionale Sportbekleidung spezialisierte DKB.

  • Die RadiciGroup und DKB präsentieren den ersten „zirkulären“ Skianzug
  • Der Anzug besteht aus recycelten und recyclingfähigen Garnen und erfordert keinerlei Abstriche bei Stil, Design und Gebrauchseigenschaften.
  • Athleten des Sci Club RadiciGroup sind die ersten Botschafter für dieses nachhaltige Projekt.

Der erste komplett nachhaltige Skianzug, mit starkem Fokus auf Stil und Design und vollständig neu konzipiert, ist jetzt Realität. Hinter der Entwicklung dieses hochinnovativen Kleidungsstücks stehen zwei herausragende Unternehmen aus dem Raum Bergamo: Die RadiciGroup, ein weltweit führender Hersteller von chemischen Zwischenprodukten, Polyamiden, hochleistungsfähigen Kunststoffcompounds und fortschrittlichen Textillösungen, sowie die auf funktionale Sportbekleidung spezialisierte DKB.

Besonderes Merkmal dieser Kombination aus Jacke und Hose ist das aus RENCYCLE gefertigte Gewebe, einem von der RadiciGroup produzierten Garn, das auf mechanisch recyceltem Polyamid basiert und eine signifikante Senkung des Energieverbrauchs, der CO2-Emissionen und des Wasserverbrauchs ermöglicht. Die Wattierung und zahlreiche andere Elemente des Anzugs, darunter Reißverschlüsse, Klettverschlüsse, Knöpfe und Nahtmaterialien, bestehen ebenfalls aus Polyamid.

Dies ist das Ergebnis der intensiven Zusammenarbeit zwischen der RadiciGroup und DKB bei der Forschung und Entwicklung chemisch ähnlicher Materialien, die sich für solche spezifischen Anwendungen eignen, die besondere technische Eigenschaften erfordern. Dass der Anzug quasi aus einem einzigen Material besteht vereinfacht das Recycling am Ende der Gebrauchsdauer signifikant. Daraus lassen sich neue Polymermaterialien gewinnen, die z. B. zur Herstellung von Komponenten für Skischuhe und -bindungen oder in der Automobil-, Möbel- oder anderen Industrien zum Einsatz kommen können, in denen Hochleistungspolyamide gefragt sind. Der von der RadiciGroup realisierte Anzug ist ein vollständig auf Ökodesign und Kreislaufwirtschaft ausgerichtetes Projekt, deren Prinzipien auf die Welt der Mode und Kleidung übertragen wurden und sich auf der Innenseite der Jacke durch den Claim „Una sostenibilità all’altezza delle nostre montagne“ (Nachhaltigkeit in unseren Bergen) widerspiegeln.

Dazu Angelo Radici, Präsident der RadiciGroup: „Auf dieses Ergebnis bin ich besonders stolz, denn es vereint meine persönlichen und beruflichen Interessen. Ich war schon immer gerne in den Bergen und beim Skilaufen, und gemeinsam mit meinen Mitarbeitern arbeite ich jeden Tag daran, innovative Lösungen zu finden, die zu mehr Nachhaltigkeit unserer Branche beitragen. Dieser Skianzug ist ein anschauliches Beispiel dafür, dass die Welt der Textilien und Bekleidung nachhaltig sein kann, ohne auf Komfort, Design, Ästhetik oder Funktionseigenschaften zu verzichten. Ich werde nicht müde zu betonen, dass die Zusammenarbeit zwischen den verschiedenen Akteuren der Lieferkette von grundlegender Bedeutung für das Ökodesign und die Schaffung von Produkten ist, die die Recycelbarkeit am Ende ihrer Gebrauchsdauer berücksichtigen, um Werkstoffe möglicherweise unendlich lange einsetzen zu können. Wir, die vorgelagerten Hersteller, nutzen gerne unser Know-how in der Werkstoffchemie und unsere Erfahrung im Recycling, um gemeinsam mit unseren Partnern nachhaltige und tragfähige Lösungen in den verschiedenen Branchen, in denen wir tätig sind, zu entwickeln.“

Quelle:

RadiciGroup

(c) RadiciGroup
25.10.2021

RadiciGroup: Mit nachhaltigen Persönlichen Schutzausrüstungen auf der A+A

Auf der diesjährigen A+A, der Messe für Sicherheit und Gesundheit bei der Arbeit, die vom 26. bis 29. Oktober in Düsseldorf stattfindet, präsentiert die RadiciGroup ihre neuen Persönlichen Schutzausrüstungen (PSA) für den industriellen Einsatz.

Das unter der Marke Radipeople Angebot umfasst Schutzanzüge, Kittel, Hauben, Kopfbedeckungen, Schuhabdeckungen und Überschuhe. Es basiert auf einer rückverfolgbaren Lieferkette und legt besonderes Augenmerk auf die verwendeten Rohstoffe und die Qualität der Endprodukte.

Die neue Produktpalette der RadiciGroup vereint Verantwortung für die Gesundheit und Sicherheit von Menschen – einer der Grundpfeiler der Nachhaltigkeitsstrategie des Unternehmens – mit einem starken Engagement für Umweltschutz. So ist Radipeople Eco der erste vollständig recycelbare Schutzanzug aus 100 % Polypropylen, denn sowohl Material, Kaschierung, Reißverschluss als auch Nahtmaterial bestehen aus diesem einzigen Werkstoff. Darüber hinaus bietet das Unternehmen auch Schutzausrüstungen auf Basis von Respunsible®, einem Spinnvlies aus recyceltem Polypropylen, oder aus Materialien, die nach ISCC Plus zertifiziert sind.

Auf der diesjährigen A+A, der Messe für Sicherheit und Gesundheit bei der Arbeit, die vom 26. bis 29. Oktober in Düsseldorf stattfindet, präsentiert die RadiciGroup ihre neuen Persönlichen Schutzausrüstungen (PSA) für den industriellen Einsatz.

Das unter der Marke Radipeople Angebot umfasst Schutzanzüge, Kittel, Hauben, Kopfbedeckungen, Schuhabdeckungen und Überschuhe. Es basiert auf einer rückverfolgbaren Lieferkette und legt besonderes Augenmerk auf die verwendeten Rohstoffe und die Qualität der Endprodukte.

Die neue Produktpalette der RadiciGroup vereint Verantwortung für die Gesundheit und Sicherheit von Menschen – einer der Grundpfeiler der Nachhaltigkeitsstrategie des Unternehmens – mit einem starken Engagement für Umweltschutz. So ist Radipeople Eco der erste vollständig recycelbare Schutzanzug aus 100 % Polypropylen, denn sowohl Material, Kaschierung, Reißverschluss als auch Nahtmaterial bestehen aus diesem einzigen Werkstoff. Darüber hinaus bietet das Unternehmen auch Schutzausrüstungen auf Basis von Respunsible®, einem Spinnvlies aus recyceltem Polypropylen, oder aus Materialien, die nach ISCC Plus zertifiziert sind.

Dank ihrer Vielseitigkeit und technischen Eigenschaften eignen sich die Produkte der Radipeople Familie für zahlreiche Einsatzgebiete wie Öl- und Gasindustrie, Versorgungsunternehmen, Baugewerbe, Lebensmittelindustrie, Auto-Lackierstraßen, Schiffsbau, Wartung und Instandhaltung, Landwirtschaft, Labors, Produktion von Mikrochips, Pharmaindustrie und chemische Industrie.

Die Persönlichen Schutzausrüstungen der Marke Radipeople kombinieren einen sehr hohen Schutz gegen chemische Gefährdungen (Flüssigkeiten, Spritzer, Flüssigkeitsstrahl, Partikel  und  Sprühnebel), biologische  Gefährdungen  und  Infektionserreger  mit  hoher Festigkeit und geringem Gewicht, um Schutzwirkung und Tragekomfort zu optimieren.

Alle Produkte der Radipeople Familie bestehen aus vollständig rückverfolgbaren Materialien und werden von zahlreichen Mitarbeitern vollständig in Italien hergestellt. Die auf Ökodesignrichtlinien basierenden Verpackungen sind kompakt und lassen sich vollständig recyceln.

Quelle:

RadiciGroup

RadiciGroup: Producing apparel from waste oil (c) RadiciGroup
30.09.2021

RadiciGroup: Producing apparel from waste oil

RadiciGroup demonstrates the feasibility of industrial-scale production of polyamides (nylon) starting from bio adipic acid obtained from renewable raw materials, including waste oil and by-products of the oil industry. Potential application sectors for the process and products are textile/fashion, automotive, design, electrical and electronics.

The research was conducted through the Ulysses project and experimentation was performed in collaboration with research centres and universities. Partial funding was received from the Region of Piedmont, within the scope of the “Call for Proposals IR2 (Industrialization of research results)”. The ambitious, innovative multiyear project was launched in March 2018 and stemmed from RadiciGroup's desire to increase the sustainability of its products, whilst delivering the same quality and performance as required by product standards. What is more, the Group wanted to meet the demand coming from its various strategic sectors, in line with the European targets for the development of low-emission businesses and a circular economy.

RadiciGroup demonstrates the feasibility of industrial-scale production of polyamides (nylon) starting from bio adipic acid obtained from renewable raw materials, including waste oil and by-products of the oil industry. Potential application sectors for the process and products are textile/fashion, automotive, design, electrical and electronics.

The research was conducted through the Ulysses project and experimentation was performed in collaboration with research centres and universities. Partial funding was received from the Region of Piedmont, within the scope of the “Call for Proposals IR2 (Industrialization of research results)”. The ambitious, innovative multiyear project was launched in March 2018 and stemmed from RadiciGroup's desire to increase the sustainability of its products, whilst delivering the same quality and performance as required by product standards. What is more, the Group wanted to meet the demand coming from its various strategic sectors, in line with the European targets for the development of low-emission businesses and a circular economy.

Quelle:

RadiciGroup