Aus der Branche

Zurücksetzen
27 Ergebnisse
Stoffstrombild Kunststoffe 2024: Start der Datenerhebung (c) bvse
05.03.2024

Stoffstrombild Kunststoffe 2024: Start der Datenerhebung

Ein Bündnis von Organisationen entlang der gesamten Kunststoff-Wertschöpfungskette, von den Herstellern, über die Anwender, bis hin zu der Recyclingbranche und den Industriegewerkschaften ruft seit 1997 alle zwei Jahre zur Teilnahme an der Studie "Stoffstrombild Kunststoffe" auf. Das Stoffstrombild Kunststoffe umfasst Daten zu Produktion, Verarbeitung, Verbrauch, Abfallaufkommen, Verwertung und Wiedereinsatz von Kunststoffen bis hin zum Wiedereinsatz der Recyclate in Deutschland. Das Stoffstrombild Kunststoffe genießt bei Politik, Behörden und Fachöffentlichkeit hohes Ansehen und zeigt, dass Kreislaufwirtschaft ein zentrales Thema für die deutsche Kunststoffbranche ist.

Die Ergebnisse des aktuellen Stoffstrombild Kunststoffe werden voraussichtlich im Oktober 2024 veröffentlicht. Teilnehmen können alle Unternehmen, die Kunststoffe herstellen, verarbeiten, für Endprodukte einsetzen sowie deren Abfälle sammeln und verwerten oder die dafür notwendigen Maschinen herstellen. Die Datenerhebung erfolgt anonymisiert durch die Conversio Market & Strategy GmbH.

Ein Bündnis von Organisationen entlang der gesamten Kunststoff-Wertschöpfungskette, von den Herstellern, über die Anwender, bis hin zu der Recyclingbranche und den Industriegewerkschaften ruft seit 1997 alle zwei Jahre zur Teilnahme an der Studie "Stoffstrombild Kunststoffe" auf. Das Stoffstrombild Kunststoffe umfasst Daten zu Produktion, Verarbeitung, Verbrauch, Abfallaufkommen, Verwertung und Wiedereinsatz von Kunststoffen bis hin zum Wiedereinsatz der Recyclate in Deutschland. Das Stoffstrombild Kunststoffe genießt bei Politik, Behörden und Fachöffentlichkeit hohes Ansehen und zeigt, dass Kreislaufwirtschaft ein zentrales Thema für die deutsche Kunststoffbranche ist.

Die Ergebnisse des aktuellen Stoffstrombild Kunststoffe werden voraussichtlich im Oktober 2024 veröffentlicht. Teilnehmen können alle Unternehmen, die Kunststoffe herstellen, verarbeiten, für Endprodukte einsetzen sowie deren Abfälle sammeln und verwerten oder die dafür notwendigen Maschinen herstellen. Die Datenerhebung erfolgt anonymisiert durch die Conversio Market & Strategy GmbH.

Für die Lebenswegbetrachtung wurden zuletzt mehr als 2.000 Unternehmen aus Kunststofferzeugung, -verarbeitung und -verwertung befragt sowie amtliche und weitere Statistiken herangezogen. Um auch in diesem Jahr wieder eine hohe Abdeckung zu erreichen, werden in Kürze wieder Fragebögen versandt, Telefoninterviews geführt sowie Untersuchungen und Recherchen gestartet.

Das Stoffstrombild wird von der Conversio Market & Strategy GmbH erstellt. Auftraggeber der Studie ist die BKV GmbH mit Unterstützung von PlasticsEurope Deutschland e. V., der Bundesverband der Deutschen Entsorgungs-, Wasser- und Kreislaufwirtschaft e. V., der bvse-Bundesverband Sekundärrohstoffe und Entsorgung e. V., VDMA e.V. Kunststoff und Gummimaschinen, die IK – Industrievereinigung Kunststoffverpackungen e. V., der KRV – Kunststoffrohrverband e. V., VinylPlus Deutschland e.V., der GKV – Gesamtverband Kunststoffverarbeitende Industrie e. V. AVK – Industrievereinigung Verstärkte Kunststoffe e. V., FSK – Fachverband Schaumkunststoffe und Polyurethane e.V., TecPart – Verband Technische Kunststoff-Produkte e. V., pro-K Industrieverband langlebige Kunststoffprodukte und Mehrwegsysteme e. V., der IG BCE Industriegewerkschaft Bergbau, Chemie, Energie, sowie dem VCI – Verband der Chemischen Industrie e.V.

Quelle:

bvse-Bundesverband Sekundärrohstoffe und Entsorgung e. V.

28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Quelle:

VDMA e. V.
Textile Machinery

01.11.2023

VDMA @ ITMA ASIA: Smart technologies for green textile production

At ITMA ASIA + CITME end of November in Shanghai, 40 VDMA members will present their technologies and solutions for the Chinese and Asian markets under the heading "smart technologies for green textile production". This year’s ITMA ASIA is the first major post-Corona textile machinery fair in China.

The exhibiting VDMA members cover nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing.  

The VDMA Textile Machinery Association and VDMA China will be present in the industry hub in Hall 8 zone B to support the members before and during the fair. The industry hub is also contact point for visitors who want to inform themselves about the exhibiting VDMA members. 

At ITMA ASIA + CITME end of November in Shanghai, 40 VDMA members will present their technologies and solutions for the Chinese and Asian markets under the heading "smart technologies for green textile production". This year’s ITMA ASIA is the first major post-Corona textile machinery fair in China.

The exhibiting VDMA members cover nearly all different machinery chapters with a focus on spinning and manmade fibers, nonwovens, weaving, braiding, knitting & hosiery, finishing & dyeing and textile processing.  

The VDMA Textile Machinery Association and VDMA China will be present in the industry hub in Hall 8 zone B to support the members before and during the fair. The industry hub is also contact point for visitors who want to inform themselves about the exhibiting VDMA members. 

Weitere Informationen:
ITMA Asia + CITME VDMA Textilmaschinen
Quelle:

VDMA e. V.
Textile Machinery

20.07.2023

VDMA Textile Machinery: Planned PFAS ban threatens important textile machine components

The EU's planned ban on the entire group of per- and polyfluoroalkyl substances (PFAS) would endanger many industrial processes, states VDMA Textile Machinery. Textile manufacturing would be affected twice – by missing important chemicals for technical textile production and by the lack of indispensable textile machine components. The latter would affect the whole supply chain from textile machinery manufacturers and its suppliers to the textile industry in the EU.

The EU's planned ban on the entire group of per- and polyfluoroalkyl substances (PFAS) would endanger many industrial processes, states VDMA Textile Machinery. Textile manufacturing would be affected twice – by missing important chemicals for technical textile production and by the lack of indispensable textile machine components. The latter would affect the whole supply chain from textile machinery manufacturers and its suppliers to the textile industry in the EU.

Solid PFAS parts are widely used in textile machinery production, especially where extreme conditions prevail. Verena Thies, Managing Shareholder Thies GmbH & Co. KG, explains: “Our textile dyeing machines are world leaders and set standards in efficiency and sustainability. They work under pressure at temperatures of up to 140° C using highly acidic, highly basic and/or oxidative or even reductive chemicals. This is precisely why PFAS is needed, for example, in seals and rings, flaps as well as valves for a long-lasting and high-quality machine concept – because there are no alternatives with qualitatively equivalent properties. In addition, PTFE semi-finished products enable a sliding and gentle contact with the textile fabric in ecologically important techniques in the transformation of textile wet finishing."

PTFE and also FKM are fluoropolymers (fluoroplastics and fluoroelastomers), a group within the broad PFAS range of about 10,000 substances which would be banned for production, use and sale in the EU. They are high-tech materials, and as so-called "polymers of low concern" are not a danger to the environment, according to the OECD. Furthermore, these components are installed inside a machine and exchanged or disposed of properly. PFAS such as PTFE and FKM must be exempted from the ban, demands the VDMA in its position paper.

"In this way, the association also supports the approach taken in Great Britain. With the 10,000 substances, everything is lumped together, although the various PFAS groups are very different," warns Dr Sarah Brückner, Head of VDMA Environmental Affairs and Sustainability. "We should take our cue from the UK and look at the substance groups in a differentiated way."
Apart from several types of dyeing machines, PFAS components are indispensable in textile drying machines (e.g., conveyor dryers, tumblers and stenters) and damping machines. They are also used in fully automatic chemical dispensing systems and pressure vessels for thermochemical treatment of textile recycling material, heat recovery systems and wastewater treatment technology. This means that a lot of machines needed for a sustainable textile production would be affected by the PFAS ban.

VDMA Textile Machinery will take part in the ongoing EU public consultation. The association will describe indispensable key functionalities and conditions of use in the textile machinery sector as well as the consequences for the companies and the customers in the EU if the ban is imposed. The consultation ends on September 25, 2023, and VDMA urged its members affected by the planned restriction to participate in the consultation at an early stage. This is the only way to ensure that the broad scope of the mechanical and plant engineering sector is represented.

Weitere Informationen:
VDMA Textilmaschinen PFAS
Quelle:

VDMA e. V.
Textile Machinery

 

24.05.2023

Way2ITMA: Recycling technologies offered by VDMA members

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling
The short descriptions of the solutions offered by the member companies are structured according to the following headings:

  • Recycling of textile production waste and textiles
  • Recycling of caustic soda and waste heat
  • Processing of recycled materials

In the run-up to ITMA, VDMA is presenting an overview of the textile recycling technologies offered by member companies exhibiting at ITMA. VDMA and its members are committed to a responsible use of all resources used in textile production. VDMA members create the technical prerequisites for the efficient reuse and recycling of textile raw materials.

In the spirit of the circular economy, VDMA companies offer solutions for the entire processing and production chain. The production programme and services include equipment and technologies for recycling textile production waste, textiles, textile auxiliaries or waste heat and for processing recycled materials into textiles.

An overview of the available technologies is provided here: Way2ITMA-Recycling
The short descriptions of the solutions offered by the member companies are structured according to the following headings:

  • Recycling of textile production waste and textiles
  • Recycling of caustic soda and waste heat
  • Processing of recycled materials
Weitere Informationen:
VDMA ITMA 2023 ITMA Recycling raw materials
Quelle:

VDMA e.V.

02.03.2023

VDMA: Way2ITMA

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

100 days before ITMA 2023 in Milan, VDMA Textile Machinery launched its “Way2ITMA” webinar series. “Transforming the World of Textiles: efficient – digital – circular”. Under this heading, VDMA technology providers will present their solutions along the value chain.

Speakers of the virtual event were Dr. Janpeter Horn, Chairman of the VDMA Textile Machinery Association and Managing Director of August Herzog Maschinenfabrik, Dirk Vantyghem, Director General, EURATEX, Francis Elias Junker, Area Sales Manager, Andritz Laroche and Tanja Karila, Chief Marketing Officer, Infinited Fiber Company.

With regard to the EU strategy for sustainable and circular textiles, Dr. Horn said: “This topic concerns all of us, consumers and producers. We as machinery builders position ourselves as enablers. We want to be part of the solution of this ambitious project”.

Dirk Vantyghem introduced the core issues of the EU textile strategy launched in 2022, which is the most ambitious plan ever, to push the textile sector towards sustainability and transparency, and promote a new circular business model. If wrongly designed, that new framework may collapse the European textile value chain. But if done rightly, the changes ahead could bring a paradigm shift in the sector, where competitiveness is no longer based on price only, but also on sustainability and innovation, explained Vantyghem.

Francis Elias Junker showed high level of expertise for mechanical textile recycling for both spinning and nonwovens industries that Andritz has. The company has a diversity of solutions to offer and several cooperation partners, covering the value chain from recovery of fiber to the chemical modification and preparation for the production of yarn.

Tanja Karila gave an overview of how Infinited Fiber is turning textile waste into new fibers. Patented technology turns post-consumer textile waste into brand new premium quality fibers for the textile industry. The textile-to-textile recycling technology captures the value in waste that would otherwise be landfilled or burned.

Weitere Informationen:
ITMA 2023 Sustainability Webinar
Quelle:

VDMA e. V.
Textile Machinery

30.12.2022

Composites United erklärt Beitritt in Composites Germany

Gesellschaft und Wirtschaft stehen vor existenziellen Herausforderungen. Dazu gehören neben den Folgen des Klimawandels auch die Erkenntnis, dass Energie und viele Ressourcen nicht mehr im gewohnten Maße zur Verfügung stehen, so dass deren Effizienz kurzfristig deutlich gesteigert werden muss. Leichtbau insbesondere mit Faserverbundmaterialien kann und wird hier einen wichtigen Beitrag leisten, z. B. in Windkraftanlagen oder Wasserstoffspeichern. Als Dachverband vertritt Composites Germany die Fähigkeiten und Interessen der deutschen Faserverbundindustrie. Durch den Wiedereintritt des Composites United bündelt Composites Germany die Kräfte der beiden führenden Composites-Netzwerke in Deutschland und seine Position wird deutlich gestärkt werden. Geänderte Rahmenbedingungen machen den Eintritt wieder möglich und nötig.

Gesellschaft und Wirtschaft stehen vor existenziellen Herausforderungen. Dazu gehören neben den Folgen des Klimawandels auch die Erkenntnis, dass Energie und viele Ressourcen nicht mehr im gewohnten Maße zur Verfügung stehen, so dass deren Effizienz kurzfristig deutlich gesteigert werden muss. Leichtbau insbesondere mit Faserverbundmaterialien kann und wird hier einen wichtigen Beitrag leisten, z. B. in Windkraftanlagen oder Wasserstoffspeichern. Als Dachverband vertritt Composites Germany die Fähigkeiten und Interessen der deutschen Faserverbundindustrie. Durch den Wiedereintritt des Composites United bündelt Composites Germany die Kräfte der beiden führenden Composites-Netzwerke in Deutschland und seine Position wird deutlich gestärkt werden. Geänderte Rahmenbedingungen machen den Eintritt wieder möglich und nötig.

Weiterhin werden der VDMA und Leichtbau BW die Arbeit von Composites Germany als assoziierte Mitglieder unterstützen und das Know-how ihrer Mitglieder einbringen. „Gemeinsam werden die Organisationen den nachhaltigen Leichtbau als Schlüsseltechnologie für Deutschland fördern und stellen dabei die Composites-Werkstoffe in den Mittelpunkt“, so Prof. Klaus Drechsler von Composites United, einer der beiden Vorstände von Composites Germany. „Als Netzwerk und Sprachrohr der Composites-Industrie bündelt Composites Germany die Interessen der Mitglieder. Das Ziel ist, die Aktivitäten kontinuierlich auszubauen, Innovationen und Technologien zu fördern, neue Märkte und neue Wertschöpfungsketten zu entwickeln und die Aus- und Weiterbildung zu verankern“, ergänzt sein Vorstandskollege Dr. Michael Effing von der AVK. Die Vereinbarung wurde am 29. November 2022 während des JEC Forum DACH in Augsburg geschlossen, bei dem beide Verbände Kooperationspartner der Veranstaltung waren.

Quelle:

Composites Germany

Foto VDMA
12.12.2022

Nachwuchspreis für KI-gestützte Produktionsüberwachung von Carbonfasern

  • Formel 1-Fahrzeuge werden in Zukunft günstiger

Carbon ist der Stoff, aus dem bei Formel 1-Fahrzeuge häufig die Karosserie hergestellt wird. Bislang ist Carbon teuer. Es kann günstiger und effizienter hergestellt werden, wenn künstliche Intelligenz die Produktionsprozesse überwacht. Ein Kamerasystem kombiniert mit künstlicher Intelligenz erkennt automatisch Fehler in der Herstellung von Carbonfasern. Damit wird eine teure manuelle Kontrolle der Carbonfasern hinfällig und der Herstellungspreis der Carbonfaser kann nachhaltig reduziert wenden.

Für diese Idee erhielt der Nachwuchsingenieur Deniz Sinan Yesilyurt am 6. Dezember den zweiten Preis des Nachwuchspreises „Digitalisierung im Maschinenbau“.

  • Formel 1-Fahrzeuge werden in Zukunft günstiger

Carbon ist der Stoff, aus dem bei Formel 1-Fahrzeuge häufig die Karosserie hergestellt wird. Bislang ist Carbon teuer. Es kann günstiger und effizienter hergestellt werden, wenn künstliche Intelligenz die Produktionsprozesse überwacht. Ein Kamerasystem kombiniert mit künstlicher Intelligenz erkennt automatisch Fehler in der Herstellung von Carbonfasern. Damit wird eine teure manuelle Kontrolle der Carbonfasern hinfällig und der Herstellungspreis der Carbonfaser kann nachhaltig reduziert wenden.

Für diese Idee erhielt der Nachwuchsingenieur Deniz Sinan Yesilyurt am 6. Dezember den zweiten Preis des Nachwuchspreises „Digitalisierung im Maschinenbau“.

Carbonfasern sind wegen ihrer guten Eigenschaften begehrt. Sie sind sehr leicht – sie wiegen bis zu 50 Prozent weniger als Aluminium. Die Kombination aus geringem Gewicht und guten mechanischen Eigenschaften bietet viele Vorteile. Gerade in Zeiten der Energiewende sind Leichtbaumaterialien wie Carbon so relevant wie nie zuvor. Gleichzeitig sind Carbonfasern so widerstandsfähig gegen äußere Belastungen wie Metalle. Diese guten Eigenschaften von Carbonfasern zu erreichen, ist aufwändig.

Bis zu 300 einzelne Faserstränge –Bündel von einzelnen Fasern - müssen während der Herstellung gleichzeitig überwacht werden. Wenn Carbonfasern reißen, kostet es Zeit und Geld, die beschädigten Fasern auszusortieren. Dies ist nur ein Beispiel für verschiedene Fehler, die bei den Fasern während der Produktion auftreten können.

Deshalb brachte Deniz Sinan Yesilyurt eine Kamera an der Carbonfaseranlage an, die Bilder verschiedener Faserfehler während der Produktion aufnimmt und in einer Datenbank sammelt. Die künstliche Intelligenz im Informationstechnologiesystem der Kamera wertet die Faserfehler aus, indem sie die Bildaufnahmen vorgegebenen Referenzfehlern zuordnet. Dabei erkennt sie verschiedene Faserfehler mit einer Zuordnungsgenauigkeit von 99 Prozent. Der Prozess kann auch für andere Bereiche eingesetzt werden, die chemische Fasern herstellen.

Deniz Sinan Yesilyurt erhielt den Preis vom Verband für Maschinen- und Anlagenbau (VDMA) in Frankfurt am Main. Er ist Bachelorabsolvent am Institut für Textiltechnik (ITA) der RWTH Aachen. Der vollständige Titel seiner Bachelorarbeit: „Entwicklung einer Kl-gestützten Prozessüberwachung unter Verwendung von Machine Learning zur Erkennung von Faserbeschädigungen im Stabilisierungsprozess“.
Der VDMA zeichnete insgesamt vier Abschlussarbeiten unterschiedlicher Hochschulen mit dem Preis aus. Der Preis wird für herausragende Abschlussarbeiten verliehen und wurde in Deutschland, Österreich und der Schweiz ausgeschrieben.

Quelle:

ITA – Institut für Textiltechnik of RWTH Aachen Universit

(c) Monforts
10.11.2022

Monforts part of the VDMA Trade Delegation to Turkmenistan

Monforts will take part in a VDMA textile technology trade delegation to Turkmenistan from November 21-26, on behalf of the German Federal Ministry of Economics.

Around 80% of Turkmenistan’s production of textiles and garments is currently exported, with a value of $350 million in 2020. This is now expected to rise to $450 million by 2023.

In addition to expanding in cotton yarns and fabrics, the country is also looking to enter other textile markets, including nonwovens, carpets and absorbent hygiene products, and negotiations are currently underway between the Turkmenistan Ministry of Textile Industry and the Korean Institute of Industrial Technologies to also commence manufacturing synthetic fibres from polymers.

In 2021, a new textile complex was opened by state-owned textile manufacturer Cotam in the city of Kaka, which is aiming to produce 3,650 tons of yarn, 12 million square metres of different types of fabrics and 1.2 million tons of finished products annually, with the creation of 1,300 new jobs.

Monforts will take part in a VDMA textile technology trade delegation to Turkmenistan from November 21-26, on behalf of the German Federal Ministry of Economics.

Around 80% of Turkmenistan’s production of textiles and garments is currently exported, with a value of $350 million in 2020. This is now expected to rise to $450 million by 2023.

In addition to expanding in cotton yarns and fabrics, the country is also looking to enter other textile markets, including nonwovens, carpets and absorbent hygiene products, and negotiations are currently underway between the Turkmenistan Ministry of Textile Industry and the Korean Institute of Industrial Technologies to also commence manufacturing synthetic fibres from polymers.

In 2021, a new textile complex was opened by state-owned textile manufacturer Cotam in the city of Kaka, which is aiming to produce 3,650 tons of yarn, 12 million square metres of different types of fabrics and 1.2 million tons of finished products annually, with the creation of 1,300 new jobs.

Monforts has supplied seven complete finishing machine ranges to Turkmenistan company Cotam, as the Central Asian country looks to boost its production of cotton yarns and fabrics via an ambitious textile industry modernisation plan.

Cotam now has two separate manufacturing sites at Babadayhan and Kaka, both of which have now been equipped with Monforts technologies built at the company’s plant in St Stefan in Austria.

Cotam supplies finished fabrics to both the apparel and home textiles markets and at its Babadayhan plant is now operating two Montex stenter lines and a Monfortex sanforizing line. At its new Kaka plant, the company has also installed two Montex stenter lines, as well as a Thermex universal hotflue for continuous dyeing and curing.

“Turkmenistan celebrated 30 years of independence in 2021 and has made a giant leap forward in its progressive development,” said Monforts Managing Director Stefan Flöth. “A textile industry equipped with modern high-tech equipment has been created factories and equipped with the most advanced and high-performance equipment built and put into operation. We are extremely pleased that the Ministry of the Textile Industry of Turkmenistan chose Monforts machinery for its new textile complex in Kaka and together with the machines for Babadayhan and other recent projects we are proud to say that 15 Monforts machines are now established in the country.”

Quelle:

AWOL for Monforts

Dr. Harald Weber und Thomas Waldmann. Foto: VDMA FV Textilmaschinen
v. l. n. r.: Dr. Harald Weber und Thomas Waldmann.
08.11.2022

VDMA FV Textilmaschinen: Dr. Harald Weber folgt auf Thomas Waldmann

Dr. Harald Weber wird zum 1. Januar 2023 neuer Geschäftsführer des VDMA Fachverbands Textilmaschinen. Der 44-jährige Wirtschaftsingenieur folgt auf Thomas Waldmann, der die Position seit 1991 innehatte und Ende des Jahres in den Ruhestand geht.

Nach seiner Promotion an der TU Darmstadt und einer Dozenten-Tätigkeit an der Technischen Hochschule Mittelhessen kam Dr. Weber 2011 zum VDMA. Im Fachverband Kunststoff- und Gummimaschinen war er seitdem als Referent für die Themen Technik und Innovation verantwortlich.

Dr. Janpeter Horn, Vorsitzender des VDMA Fachverbands Textilmaschinen und Geschäftsführer der August Herzog Maschinenfabrik erklärte zum Personalwechsel: „Dr. Weber verfügt aus seiner bisherigen Tätigkeit in der Kunststoffbranche über profunde Kenntnisse und Erfahrungen bei Themen, die auch im Textilmaschinenbau weiter an Bedeutung gewinnen. Als Beispiele seien Recycling und Kreislaufwirtschaft genannt sowie Digitalisierung und hier speziell der Schnittstellen-Standard OPC UA.“

Dr. Harald Weber wird zum 1. Januar 2023 neuer Geschäftsführer des VDMA Fachverbands Textilmaschinen. Der 44-jährige Wirtschaftsingenieur folgt auf Thomas Waldmann, der die Position seit 1991 innehatte und Ende des Jahres in den Ruhestand geht.

Nach seiner Promotion an der TU Darmstadt und einer Dozenten-Tätigkeit an der Technischen Hochschule Mittelhessen kam Dr. Weber 2011 zum VDMA. Im Fachverband Kunststoff- und Gummimaschinen war er seitdem als Referent für die Themen Technik und Innovation verantwortlich.

Dr. Janpeter Horn, Vorsitzender des VDMA Fachverbands Textilmaschinen und Geschäftsführer der August Herzog Maschinenfabrik erklärte zum Personalwechsel: „Dr. Weber verfügt aus seiner bisherigen Tätigkeit in der Kunststoffbranche über profunde Kenntnisse und Erfahrungen bei Themen, die auch im Textilmaschinenbau weiter an Bedeutung gewinnen. Als Beispiele seien Recycling und Kreislaufwirtschaft genannt sowie Digitalisierung und hier speziell der Schnittstellen-Standard OPC UA.“

Dr. Horn ergänzte: „Unser herzliches Willkommen an Dr. Weber verbinden wir mit einem großen Dankeschön an Thomas Waldmann. 30 Jahre Geschäftsführer beim Fachverband Textilmaschinen stehen auch für sich ständig ändernde Rahmenbedingungen. Herr Waldmann war stets am Puls der Branche und hat mit seinem Team die besonderen Interessen der Mitgliedsunternehmen vertreten: Von der Technikpolitik über Herausforderungen des Marktzugangs bis zur Leitmesse ITMA und dem europäischen Verband CEMATEX. Die ITMA 2007 in München war dabei sicherlich ein Highlight. Der Vorstand des Fachverbands wünscht Herrn Waldmann für den nun beginnenden neuen Lebensabschnitt alles Gute.“

Quelle:

VDMA e. V.
Textile Machinery

29.06.2022

VDMA AG Medizintechnik wird Mitglied im BVMed

Der Bundesverband Medizintechnologie (BVMed) hat die Arbeitsgemeinschaft Medizintechnik des VDMA (Verband Deutscher Maschinen- und Anlagenbau) als neues Mitglied aufgenommen.

Der Bundesverband Medizintechnologie (BVMed) hat die Arbeitsgemeinschaft Medizintechnik des VDMA (Verband Deutscher Maschinen- und Anlagenbau) als neues Mitglied aufgenommen.

Zur Bewältigung der Herausforderungen der MedTech-Zulieferer hat der BVMed einen neuen „Fachbereich Zulieferer (FBZ)“ gegründet, in dem neben den Zuliefer-Unternehmen des BVMed auch die VDMA AG Medizintechnik aktiv mitarbeiten wird. Gründungsmitglieder des BVMed-Fachbereichs sind neben der VDMA AG Medizintechnik die Unternehmen Ceramtec, Freudenberg und Raumedic. Der BVMed-Fachbereich steht weiteren Zulieferunternehmen offen, die aktiv an gemeinsamen Themen mitarbeiten wollen. Bei der MDR ist die Medizinprodukte-Zulieferindustrie beispielsweise von den Themen Dokumentationspflichten, Marktbeobachtung (Post Market Surveillance | PMS) und Auditierung durch Benannte Stellen betroffen. Weitere Themen sind die Herausforderungen beim Aufrechterhalten globaler Lieferketten und der Versorgungssicherheit in Krisenzeiten sowie der Themenkomplex Umwelt und Nachhaltigkeit, beispielsweise der Kunststoff-Kreislaufwirtschaft und dem Lieferkettensorgfaltspflichtengesetz. Gemeinsame Themen mit den Zulieferern ergeben sich auch im Bereich Forschung & Entwicklung, beispielsweise bei Materialrezepturen.

Die VDMA Arbeitsgemeinschaft Medizintechnik ist das Netzwerk für die Zuliefererindustrie der Medizintechnikbranche. Mit insgesamt über 320 Unternehmen, Forschungsinstituten und Startups bildet der Verband zuliefererseitig die komplette Prozesskette der Medizintechnik ab.

Weitere Informationen:
BVMed Medizintechnik
Quelle:

Bundesverband Medizintechnologie e.V.

(c) VDMA
Award winners with foundation chairman and professors
23.06.2022

VDMA: Junior engineers with focus on sustainability

On the occasion of the Techtextil fair in Frankfurt, the Chairman of VDMA’s Walter Reiners-Stiftung Foundation, Peter D. Dornier, has awarded prizes to seven successful young engineers. For the first time, the Foundation awarded two Sustainability Awards. They are awarded to academic works in which, for example, solutions for resource-saving products and technologies are developed.

A Sustainability Prize in the category Project Work, endowed with 3.000 euros was awarded to Simon Hoebel, TU Dresden, for his thesis on recycled thermoplastic fibres for composite components.
Marina Michel, TU Dresden, received a Sustainability Award in the category Master, worth 3.500 euros. The topic of her master thesis was the functionalisation of yarns for the filtration of micro- and nanoplastics from water.

A Promotion Prize in the category Project Work, endowed with 4.000 euros, was awarded to a student group from RWTH Aachen. The teamwork of Luis Gleissner, Leopold Habersbrunner, Frederic Olbrich and Frederik Schicks was the construction of a test rig for tests on oil-adsorbing textiles.

On the occasion of the Techtextil fair in Frankfurt, the Chairman of VDMA’s Walter Reiners-Stiftung Foundation, Peter D. Dornier, has awarded prizes to seven successful young engineers. For the first time, the Foundation awarded two Sustainability Awards. They are awarded to academic works in which, for example, solutions for resource-saving products and technologies are developed.

A Sustainability Prize in the category Project Work, endowed with 3.000 euros was awarded to Simon Hoebel, TU Dresden, for his thesis on recycled thermoplastic fibres for composite components.
Marina Michel, TU Dresden, received a Sustainability Award in the category Master, worth 3.500 euros. The topic of her master thesis was the functionalisation of yarns for the filtration of micro- and nanoplastics from water.

A Promotion Prize in the category Project Work, endowed with 4.000 euros, was awarded to a student group from RWTH Aachen. The teamwork of Luis Gleissner, Leopold Habersbrunner, Frederic Olbrich and Frederik Schicks was the construction of a test rig for tests on oil-adsorbing textiles.

Felix Zerbes, RWTH Aachen, was awarded a Promotion Prize of 3.500 euros in the category Master. He developed a technical solution for air jet weaving to improve the quality of woven fabric.

Quelle:

VDMA e. V.

(c) VDMA
Vorsitzende und stellvertretende Vorsitzende des VDMA Textilmaschinenbau: Verena Thies, Dr. Janpeter Horn, Regina Brückner.
31.03.2022

VDMA: Dr. Janpeter Horn neuer Vorsitzender des Fachverbands Textilmaschinen

Dr. Janpeter Horn, Geschäftsführer der August Herzog Maschinenfabrik, ist neuer Vorsitzender des VDMA Fachverbands Textilmaschinen. Dr. Horn wurde auf der Mitgliederversammlung des Verbandes in Leonberg gewählt. Komplettiert wird der neue Vorstand durch Frau Regina Brückner, geschäftsführende Gesellschafterin der Brückner Trockentechnik und Frau Verena Thies, geschäftsführende Gesellschafterin der Thies Textilmaschinen, die zu stellvertretenden Vorsitzenden gewählt wurden.

Nach seiner Wahl erklärte Dr. Horn: „Ich freue mich, Frau Brückner und Frau Thies an meiner Seite zu haben. Beide sind seit vielen Jahren im Vorstand des VDMA Textilmaschinen sowie im Europäischen Komitee der Textilmaschinenhersteller CEMATEX tätig. Mit diesem Team sind wir gut aufgestellt, um die Interessen der Branche auf nationaler und internationaler Ebene wirksam zu vertreten.“

Herzog mit Sitz im norddeutschen Oldenburg ist ein Traditionsunternehmen und zugleich der innovativste Entwickler und Hersteller von Flecht- und Spulmaschinen. Weltweite Referenzen in der Flecht- und Wickeltechnik bestätigen die Technologie- und Qualitätsführerschaft des Unternehmens.

Dr. Janpeter Horn, Geschäftsführer der August Herzog Maschinenfabrik, ist neuer Vorsitzender des VDMA Fachverbands Textilmaschinen. Dr. Horn wurde auf der Mitgliederversammlung des Verbandes in Leonberg gewählt. Komplettiert wird der neue Vorstand durch Frau Regina Brückner, geschäftsführende Gesellschafterin der Brückner Trockentechnik und Frau Verena Thies, geschäftsführende Gesellschafterin der Thies Textilmaschinen, die zu stellvertretenden Vorsitzenden gewählt wurden.

Nach seiner Wahl erklärte Dr. Horn: „Ich freue mich, Frau Brückner und Frau Thies an meiner Seite zu haben. Beide sind seit vielen Jahren im Vorstand des VDMA Textilmaschinen sowie im Europäischen Komitee der Textilmaschinenhersteller CEMATEX tätig. Mit diesem Team sind wir gut aufgestellt, um die Interessen der Branche auf nationaler und internationaler Ebene wirksam zu vertreten.“

Herzog mit Sitz im norddeutschen Oldenburg ist ein Traditionsunternehmen und zugleich der innovativste Entwickler und Hersteller von Flecht- und Spulmaschinen. Weltweite Referenzen in der Flecht- und Wickeltechnik bestätigen die Technologie- und Qualitätsführerschaft des Unternehmens.

Der neue Fachverbandsvorstand für die Legislaturperiode bis 2026 setzt sich zusammen aus:

  • Dr. Janpeter Horn (Vorsitzender), August Herzog Maschinenfabrik
  • Regina Brückner (stellvertretende Vorsitzende), BRÜCKNER Trockentechnik
  • Verena Thies (Stellvertretende Vorsitzende), THIES
  • Peter D. Dornier, Lindauer DORNIER
  • Stefan Flöth, A. Monforts Textilmaschinen
  • Arno Gärtner, KARL MAYER STOLL Textilmaschinenfabrik
  • Markus Kleindorp, MEMMINGER-IRO
  • Andreas Lukas, ANDRITZ Küsters
  • Benjamin Mayer, Mayer & Cie.
  • Dr. Jörg Morgner, Temafa Maschinenfabrik
  • Benjamin Reiners, Reiners + Fürst
  • Dr. Uwe Rondé, Saurer Gruppe
  • Eric Schöller, Groz-Beckert
  • Georg Stausberg, Oerlikon Textile
  • Heinrich Trützschler, Trützschler Gruppe
Weitere Informationen:
VDMA Textilmaschinen
Quelle:

VDMA e. V.
Textilmaschinen

VDMA: Top-Nachwuchs mit topaktuellen Themen  (c) VDMA
Die Gewinner 2021 (von oben links nach rechts): Dr. Martin Hengstermann, Irina Kuznik, Kai-Chieh Kuo
10.11.2021

VDMA: Top-Nachwuchs mit topaktuellen Themen

Der Vorsitzende der Walter Reiners-Stiftung des VDMA Fachverbands Textilmaschinen, Peter D. Dornier hat drei erfolgreiche Nachwuchsingenieure ausgezeichnet. Die prämierten Arbeiten liefern praktische Lösungen zum Thema Kreislaufwirtschaft. Etwa zum Recycling von Carbonfasern, aus denen Leichtbauteile für die Automotive-Industrie entstehen. Oder die umweltfreundliche Produktion von Garnen aus Krabbenschalen. Ein weiteres Thema betraf medizinische Anwendungen: Die Verarbeitung hochfeiner Garne zu Stents für die Aortenreparatur. Die Preisverleihung fand am 9. November online im Rahmen der Aachen-Dresden-Denkendorf International Textile Conference statt.  

Mit einem Kreativitätspreis, dotiert mit 3.000 Euro, würdigte die Stiftung die Diplomarbeit von Irina Kuznik, TU Dresden. Sie hat mit einem kreativen Ansatz Lösungen zur Verarbeitung von Chitosan zu Fasergarn realisiert.

Der Vorsitzende der Walter Reiners-Stiftung des VDMA Fachverbands Textilmaschinen, Peter D. Dornier hat drei erfolgreiche Nachwuchsingenieure ausgezeichnet. Die prämierten Arbeiten liefern praktische Lösungen zum Thema Kreislaufwirtschaft. Etwa zum Recycling von Carbonfasern, aus denen Leichtbauteile für die Automotive-Industrie entstehen. Oder die umweltfreundliche Produktion von Garnen aus Krabbenschalen. Ein weiteres Thema betraf medizinische Anwendungen: Die Verarbeitung hochfeiner Garne zu Stents für die Aortenreparatur. Die Preisverleihung fand am 9. November online im Rahmen der Aachen-Dresden-Denkendorf International Textile Conference statt.  

Mit einem Kreativitätspreis, dotiert mit 3.000 Euro, würdigte die Stiftung die Diplomarbeit von Irina Kuznik, TU Dresden. Sie hat mit einem kreativen Ansatz Lösungen zur Verarbeitung von Chitosan zu Fasergarn realisiert.

Mit dem Förderpreis Diplom-/Masterarbeiten in Höhe von 3.500 Euro wurde Herr Kai-Chieh Kuo ausgezeichnet. Mit seiner Masterarbeit, die an der RWTH Aachen entstand, liefert Herr Kuo einen Beitrag für die Produktion lebenswichtiger Bauteile, die in der Medizin eingesetzt werden. Die Stents aus hochfeinen Garnen werden durch eine innovative Modifikation des klassischen Schlauchwebprozesses möglich.

Mit dem Förderpreis in der Kategorie Dissertationen, dotiert mit 5.000 Euro, belohnte die Walter Reiners-Stiftung die Doktorarbeit von Dr. Martin Hengstermann. Die Arbeit befasst sich mit der Herstellung rezyklierter Carbonfasern. Aus diesen können Leichtbauteile für den Kraftfahrzeug- und Flugzeugbau oder die Windenergiebranche produziert werden.

Neuer Preis Nachhaltigkeit / Kreislaufwirtschaft
Die Umfeldbedingungen der Textilbranche und des Maschinebaus ändern sich. Themen wie Klimaschutz und Kreislaufwirtschaft werden zentral. Der Vorstand der Walter Reiners-Stiftung hat sich vor diesem Hintergrund entschlossen, das Preissystem der Stiftung weiter zu entwickeln.

2022 wird die Stiftung erstmals einen Preis mit dem Fokus Design / Nachhaltigkeit ausloben. Der Stiftungsvorsitzende Peter D. Dornier erklärte hierzu: „Bereits im Design kann man die Stellschrauben dafür stellen, dass ein textiles Produkt nach dem Gebrauch wieder zu einer hochwertigen Verwendung in den Wirtschaftskreislauf eingebracht werden kann. Zum Beispiel durch entsprechende Materialverwendung und Ausrüstung. Gesucht werden Lösungen für ressourcenschonendes Design, Technologie und Fertigungsprozesse.“   

22.10.2021

VDMA Textilmaschinen veröffentlicht Positionspapier

In einem heute veröffentlichten Positionspapier begrüßen die im VDMA Fachverband Textilmaschinen organisierten Unternehmen die Ambitionen der EU zur Förderung des Klimaschutzes, insbesondere den Ansatz, die Ziele für die EU-Textil- und Bekleidungsindustrie in einer sektorspezifischen Strategie zusammenzufassen.

Der durch die wachsende Weltbevölkerung und Kaufkraft weltweit steigende Textilverbrauch geht bislang einher mit einem steigenden Ressourcenverbrauch. „Die im VDMA organisierten Textilmaschinenbau-Unternehmen richten sich auf eine funktionierende Kreislaufwirtschaft aus. Mit unseren hocheffizienten Technologien sind wir unverzichtbare Partner in diesem Transformationsprozess“, erklärt Regina Brückner, Vorsitzende des VDMA Fachverbandes Textilmaschinen und geschäftsführende Gesellschafterin der Brückner Trockentechnik.  

In einem heute veröffentlichten Positionspapier begrüßen die im VDMA Fachverband Textilmaschinen organisierten Unternehmen die Ambitionen der EU zur Förderung des Klimaschutzes, insbesondere den Ansatz, die Ziele für die EU-Textil- und Bekleidungsindustrie in einer sektorspezifischen Strategie zusammenzufassen.

Der durch die wachsende Weltbevölkerung und Kaufkraft weltweit steigende Textilverbrauch geht bislang einher mit einem steigenden Ressourcenverbrauch. „Die im VDMA organisierten Textilmaschinenbau-Unternehmen richten sich auf eine funktionierende Kreislaufwirtschaft aus. Mit unseren hocheffizienten Technologien sind wir unverzichtbare Partner in diesem Transformationsprozess“, erklärt Regina Brückner, Vorsitzende des VDMA Fachverbandes Textilmaschinen und geschäftsführende Gesellschafterin der Brückner Trockentechnik.  

In dem neuen Positionspapier betont der Vorstand des VDMA Fachverbands Textilmaschinen, dass die neuen Rahmenbedingungen praktikabel sein müssen. Frau Brückner sagte: „Die EU muss die richtige Balance zwischen notwendiger aber gleichwohl minimaler gesetzlicher Regulierung finden. Eine erfolgreiche Transformation braucht ein Level-Playing-Field, das faire Regeln für Nachhaltigkeit setzt, mit denen europäische Unternehmen dennoch ihre internationale Wettbewerbsfähigkeit steigern können.“

Das vollständige Positionspapier finden Sie im Anhang.

Weitere Informationen:
VDMA Textilmaschinen Nachhaltigkeit
Quelle:

VDMA e. V

07.06.2021

VDMA member companies at ITMA ASIA + CITME

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

Although affected by the Covid-19 pandemic, ITMA ASIA + CITME, which takes place mid-June in Shanghai, will see a convincing participation of VDMA member companies. 56 exhibitors from Germany will exhibit at this year’s edition of Asia’s major fair for textile machinery. Due to the pandemic and travel restrictions, this is much less than in 2018, when 99 exhibitors from Germany were present. The booked space of German companies has almost halved compared to 2018. Nevertheless, Germany is still the second largest exhibitor nation after China.

At a virtual VDMA press conference early June, these renowned VDMA member companies* presented their highlights for the Asian market:

  • Oerlikon Polymer Processing Solutions Division
  • Truetzschler Group
  • Neuenhauser
  • Saurer
  • Karl Mayer
  • Groz-Beckert
  • Herzog
  • Lenze
  • Mahlo
  • Sedo Treepoint
  • Thies

Instead of visiting the show personally, the VDMA offers a virtual trip to Asia. The established "Textile Machinery Webtalk" series via the newsroom IndustryArena will focus on ITMA ASIA in the run-up to the fair: VDMA Webtalks meet ITMA ASIA.

*See attached document for more information.

15.04.2021

New customer portal “Textile Machinery Newsroom” online

The new customer portal “Textile Machinery Newsroom” is now online on the IndustryArena platform. It provides visitors with technical and marketing relevant information in English for textile and nonwovens manufacturers.

IndustryArena as the umbrella platform of Textile Machinery Newsroom is the leading specialist portal for the manufacturing industry with more than 500,000 registered members and 3,000 providers.

The most prominent sections of “Textile Machinery Newsroom” include supplier news, a sourcing service and the webtalks section. From now on, VDMA’s successful “Textile Machinery Webtalks” series that started in summer 2020 will be published and advertised via this portal.

The new customer portal “Textile Machinery Newsroom” is now online on the IndustryArena platform. It provides visitors with technical and marketing relevant information in English for textile and nonwovens manufacturers.

IndustryArena as the umbrella platform of Textile Machinery Newsroom is the leading specialist portal for the manufacturing industry with more than 500,000 registered members and 3,000 providers.

The most prominent sections of “Textile Machinery Newsroom” include supplier news, a sourcing service and the webtalks section. From now on, VDMA’s successful “Textile Machinery Webtalks” series that started in summer 2020 will be published and advertised via this portal.

Companies can now participate and book future-oriented technology webinars either alone, in pairs or in the tried and tested three-part format. All VDMA members (not only companies supported by the Textile Machinery Association), textile research institutes in the EU and EFTA as well as textile and nonwovens manufacturers (customers) with whom VDMA member companies realised a joint project, for example, are entitled to participate.

Weitere Informationen:
VDMA Textile Machinery Newsroom
Quelle:

VDMA e. V.

02.02.2021

VDMA continues technology webtalks

  • Webtalk on material efficiency and recycling for the manmade fiber industry

 
The next VDMA technology webtalk is scheduled for 9th February 2021 (2-4 pm CET). The focus will be on "Material efficiency & recycling technologies for the manmade fiber industry".

The presenters and their topics at a glance:

  • Webtalk on material efficiency and recycling for the manmade fiber industry

 
The next VDMA technology webtalk is scheduled for 9th February 2021 (2-4 pm CET). The focus will be on "Material efficiency & recycling technologies for the manmade fiber industry".

The presenters and their topics at a glance:

  • Manfred Dobersberger, PureLoop and Wolfgang Hermann, EREMA Engineering Recycling Maschinen und Anlagen will present an integrated shredder extrusion technology for fibrous, textiles scraps, multilayers, films, trays, straps, foam, trays but also polymer mix materials from textiles and even classical thermoplastic composite materials.
  • Axel Hannemann, company Gneuss, offers recycling solutions which enable the fibre manufacturer to use their otherwise worthless fibre waste to substitute virgin material in the manufacture of high-quality fibres.
  • Markus Reichwein, Oerlikon Manmade Fibers: “We at Oerlikon Manmade Fibers describe a cascaded approach into new technologies as well as different material sources outlining your need for versatile solutions.”

After the presentations, the experts will be available to answer the participants' questions. Registration is possible.

Quelle:

VDMA e.V. Textilmaschinen

04.12.2020

VDMA continues technology webtalks

  • Webtalk on Technologies for Technical Textiles

The next VDMA technology webtalk is scheduled for 9th December 2020, 2.00 pm – 4.00 pm (CET). The topic will be “Technologies for Technical Textiles”.

The presenters and their topics at a glance:

Bena Manasieva Cavus from company Georg Sahm, will show how to add value and performance to your technical yarns with a single end extrusion coating line. Title of the presentation: “Winding and Yarn coating of Technical Textiles”

Janpeter Horn and Dennis Behnken, HERZOG Flechtmaschinen will present new developments in technical braids such as rope braiding/tension members to replace steel wire, medical braids for stents, ligaments, sutures and composites for lightweight construction and near net-shape preforms. Title of the presentation: “New Developments in Technical Braids”

  • Webtalk on Technologies for Technical Textiles

The next VDMA technology webtalk is scheduled for 9th December 2020, 2.00 pm – 4.00 pm (CET). The topic will be “Technologies for Technical Textiles”.

The presenters and their topics at a glance:

Bena Manasieva Cavus from company Georg Sahm, will show how to add value and performance to your technical yarns with a single end extrusion coating line. Title of the presentation: “Winding and Yarn coating of Technical Textiles”

Janpeter Horn and Dennis Behnken, HERZOG Flechtmaschinen will present new developments in technical braids such as rope braiding/tension members to replace steel wire, medical braids for stents, ligaments, sutures and composites for lightweight construction and near net-shape preforms. Title of the presentation: “New Developments in Technical Braids”

Hagen Lotzmann: "At KARL MAYER we work closely with our customers to offer the best cost–benefit ratio. We do this by using our advanced standard platforms as the basis for developing customised solutions." Title of the presentation: “Engineered solutions for technical textiles and composites – from standard application machines to customized systems”

After the presentations, the three experts will be available to answer the participants' questions. Registration is possible.

Quelle:

VDMA e.V. Textilmaschinen

VDMA: Top-Nachwuchs online geehrt (c) VDMA
Die Gewinner 2020 (von oben links nach rechts unten): Dr. Frederik Cloppenburg, Philippa Böhnke, Juan Carlos Arañó Romero, Dr. Annett Schmieder, Maximilian Speiser, Harry Lucas jun.
03.12.2020

VDMA: Top-Nachwuchs online geehrt

Der Vorsitzende der Walter Reiners-Stiftung des VDMA Fachverbands Textilmaschinen, Peter D. Dornier hat Anfang Dezember sechs erfolgreiche Nachwuchsingenieure ausgezeichnet. Die Preisverleihung fand aufgrund der Corona-Pandemie erstmals als Webkonferenz statt.

Mit Kreativitätspreisen für die cleverste Bachelor- oder Projektarbeit wurden Philippa Böhnke, ITM Dresden, und Juan Carlos Arañó Romero, ITA Aachen, geehrt. Die Preise sind mit jeweils 3.000 Euro dotiert. Die Projektarbeit von Frau Böhnke beschäftigte sich mit Verbund-Implantaten zur Reparatur und Regeneration von Knochendefekten. Gegenstand der Bachelorarbeit von Herrn Arañó Romero war eine Spinnanlage, die Fasern direkt aus auf dem Mond vorhandenen Rohstoffen gewinnen kann. So kann der Beförderungsaufwand in der Raumfahrt reduziert werden, da Materialien etwa zur Dämmung einer Mondbasis auf dem Mond selbst hergestellt werden können.

Der Vorsitzende der Walter Reiners-Stiftung des VDMA Fachverbands Textilmaschinen, Peter D. Dornier hat Anfang Dezember sechs erfolgreiche Nachwuchsingenieure ausgezeichnet. Die Preisverleihung fand aufgrund der Corona-Pandemie erstmals als Webkonferenz statt.

Mit Kreativitätspreisen für die cleverste Bachelor- oder Projektarbeit wurden Philippa Böhnke, ITM Dresden, und Juan Carlos Arañó Romero, ITA Aachen, geehrt. Die Preise sind mit jeweils 3.000 Euro dotiert. Die Projektarbeit von Frau Böhnke beschäftigte sich mit Verbund-Implantaten zur Reparatur und Regeneration von Knochendefekten. Gegenstand der Bachelorarbeit von Herrn Arañó Romero war eine Spinnanlage, die Fasern direkt aus auf dem Mond vorhandenen Rohstoffen gewinnen kann. So kann der Beförderungsaufwand in der Raumfahrt reduziert werden, da Materialien etwa zur Dämmung einer Mondbasis auf dem Mond selbst hergestellt werden können.

Zwei Förderpreise in der Kategorie Master mit einem Preisgeld in Höhe von jeweils 3.500 Euro wurden an Harry Lucas, TU Chemnitz, und Maximilian Speiser, Hochschule Reutlingen, verliehen. In der Masterarbeit von Herrn Lucas geht es um die Entwicklung eines neuen Strickkopfes für Jacquard-Gestricke, der eine breite Farbgestaltung etwa bei der Herstellung von Fan-Schals ermöglicht. Herr Speiser zeigte in seiner Arbeit konkrete Lösungen auf, wie die Energieeffizienz im Vliesprozess gesteigert werden kann.

Zwei Förderpreise des Deutschen Textilmaschinenbaus in der Kategorie Dissertation gingen dieses Jahr an Dr. Frederik Cloppenburg, ITA Aachen, und Dr. Annett Schmieder, TU Chemnitz.  Die Preise sind mit jeweils 5.000 Euro dotiert. Herr Dr. Cloppenburg entwickelte in seiner Dissertation ein Modell zur Optimierung von Vliesstoffkrempeln. Frau Dr. Schmieder stellt in ihrer Arbeit ein System der Schadenanalyse von Faserseilen vor, das erkennt, wann ein Faserseil, zum Beispiel bei Transportanwendungen, ausgewechselt werden muss.

Die Preisverleihung der Walter Reiners-Stiftung 2021 soll wieder als Präsenzveranstaltung stattfinden. Sie ist für Anfang Mai auf der Messe Techtextil in Frankfurt geplant.

Quelle:

VDMA