Aus der Branche

Zurücksetzen
1309 Ergebnisse
Devan Stain Release: PFC-free release technology for water and oil based stains Photo: Devan Chemicals
18.04.2024

Devan Stain Release: PFC-free release technology for water and oil based stains

Devan Chemicals launched its latest textile finishing technology “Devan Stain Release”, that ensures that both water and oil based stains can easily be washed off.

Devan ‘s new release finish prevents water and oil based stains such as ketchup, mud, grass, tea, vegetable and corn oils from adhering deeply to the fibres and allows stains to be washed off easily from the surface. The technology combines both stain release and wicking properties, fitting for applications where this dual benefit is required. This technology is PFC-free and has 40% of bio-based content. Unlike many PFC-based solutions that require mixing of multiple products, Devan Stain Release is an easy to apply and ready-to-use product that doesn’t necessitate mixing of different products. The finish doesn’t require reactivation after washing at home with high temperature. Soft handle is maintained.

Devan Chemicals launched its latest textile finishing technology “Devan Stain Release”, that ensures that both water and oil based stains can easily be washed off.

Devan ‘s new release finish prevents water and oil based stains such as ketchup, mud, grass, tea, vegetable and corn oils from adhering deeply to the fibres and allows stains to be washed off easily from the surface. The technology combines both stain release and wicking properties, fitting for applications where this dual benefit is required. This technology is PFC-free and has 40% of bio-based content. Unlike many PFC-based solutions that require mixing of multiple products, Devan Stain Release is an easy to apply and ready-to-use product that doesn’t necessitate mixing of different products. The finish doesn’t require reactivation after washing at home with high temperature. Soft handle is maintained.

Devan Stain Release is applicable across a wide range of textile applications, including school uniforms, garments, workwear, apparel, home textiles, bedding accessories and mattress ticking. The technology enhances the longevity of fabrics by reducing the need for frequent washing, ultimately contributing to a more sustainable consumption cycle.

Quelle:

Devan Chemicals

17.04.2024

EEA/ECHA: Europe-wide assessment of chemical pollution

The transition towards safer and more sustainable chemicals is progressing in some areas, while in others, it is just beginning. This is the finding of a first, joint Europe-wide assessment of the drivers and impact of chemical pollution by the European Environment Agency (EEA) and the European Chemicals Agency (ECHA). The benchmarking found that more work is still needed to reduce the impact of harmful substances on human health and the environment.

The number of industrial chemicals scrutinised under the EU’s chemicals legislation to determine their safety has increased substantially. Authorities now have much better knowledge about the hazardous properties of chemicals that are used across the EU, resulting in many actions to minimise and control the risks of several groups of substances.

The transition towards safer and more sustainable chemicals is progressing in some areas, while in others, it is just beginning. This is the finding of a first, joint Europe-wide assessment of the drivers and impact of chemical pollution by the European Environment Agency (EEA) and the European Chemicals Agency (ECHA). The benchmarking found that more work is still needed to reduce the impact of harmful substances on human health and the environment.

The number of industrial chemicals scrutinised under the EU’s chemicals legislation to determine their safety has increased substantially. Authorities now have much better knowledge about the hazardous properties of chemicals that are used across the EU, resulting in many actions to minimise and control the risks of several groups of substances.

According to the joint EEA-ECHA synthesis report on the EU indicator framework for chemicals, the overall use of the most harmful chemicals (in particular those that are carcinogenic, mutagenic and reprotoxic) is still growing but more slowly than the overall chemicals market growth. Pressure is increasing to avoid the use of so-called substances of concern and to implement the principles of the safe and sustainable by design framework.

There is a need to more effectively ensure that consumer products do not contain the most harmful substances, for example chemicals that are endocrine disrupting, that negatively affect the hormone system, or substances that are persistent, bioaccumulative and toxic, which present a risk for years to come even after their use has ceased.

More data and information are needed to better understand human and environmental exposure to those most harmful chemicals and their impacts. Still, the indicators show clearly that the shift to safe and sustainable chemicals must continue and should even be accelerated.

The report is based on a set of 25 key indicators, which monitor the drivers and impacts of chemical pollution in Europe.

Key findings

  • Transition towards safer and more sustainable chemicals is progressing in some areas while in others it is just getting started.
  • Action by authorities and industry has supported minimising and controlling the risks from several groups of hazardous chemicals. Efforts are ongoing to increase knowledge on chemical hazards and support risk management action where needed.
  • Available data suggest that there is little evidence of progress towards eliminating substances of concern from waste and secondary materials. This is a barrier to the transition towards a more circular economy.
  • Emissions of certain chemicals to water and air have fallen following specific EU regulations (e.g., on industrial emissions) and international actions, but further measures are needed to reach concentration levels that are not harmful for human health and the environment.
  • Emissions from industry still lead to major costs in terms of damages to human and ecosystem health.
  • Human biomonitoring offers the opportunity to understand human exposure to chemicals from multiple sources and thus health risks associated with chemical pollution. As such, biomonitoring forms a key tool to measure the effectiveness of chemicals legislation in protecting human health and the environment.
Quelle:

European Chemicals Agency

17.04.2024

adidas: Preliminary results for Q1 2024

adidas announced preliminary results for the first quarter of 2024. In Q1, currency-neutral revenues increased 8% versus the prior year level. In euro terms, the company’s revenues grew 4% to € 5.458 billion (2023: € 5.274 billion). The company’s gross margin improved 6.4 percentage points to 51.2% during the quarter (2023: 44.8%). Operating profit reached € 336 million in Q1 (2023: € 60 million).

As a result of the better-than-expected performance during the quarter, the company has increased its full-year guidance. adidas now expects currency-neutral revenues to increase at a mid- to high-single-digit rate in 2024 (previously: increase at a mid-single-digit rate). The company’s operating profit is now expected to reach a level of around € 700 million (previously: to reach a level of around € 500 million).  

adidas announced preliminary results for the first quarter of 2024. In Q1, currency-neutral revenues increased 8% versus the prior year level. In euro terms, the company’s revenues grew 4% to € 5.458 billion (2023: € 5.274 billion). The company’s gross margin improved 6.4 percentage points to 51.2% during the quarter (2023: 44.8%). Operating profit reached € 336 million in Q1 (2023: € 60 million).

As a result of the better-than-expected performance during the quarter, the company has increased its full-year guidance. adidas now expects currency-neutral revenues to increase at a mid- to high-single-digit rate in 2024 (previously: increase at a mid-single-digit rate). The company’s operating profit is now expected to reach a level of around € 700 million (previously: to reach a level of around € 500 million).  

The latest Yeezy drop generated revenues of around € 150 million and an operating profit of around € 50 million in the first quarter. In its guidance, the company assumes the sale of the remaining Yeezy inventory during the remainder of the year to occur on average at cost. This would result in additional sales of around € 200 million and no further profit contribution during the remainder of the year.

The company continues to expect unfavorable currency effects to weigh significantly on the company’s profitability this year. These effects are projected to continue to negatively impact both reported revenues and the gross margin development in 2024.

Weitere Informationen:
adidas AG adidas financial year 2024
Quelle:

adidas AG

CARBIOS wins "So French So Innovative" award Photo: CARBIOS
Dr. Bruno LANGLOIS, Technologies & Institutional Partnerships Director for CARBIOS (center), receiving the « So French So Innovative » Award on behalf of CARBIOS at InnoEX 2024, Hong Kong.
17.04.2024

CARBIOS wins "So French So Innovative" award

CARBIOS was awarded 1st prize in the "So French So Innovative" Award organized by Business France, the Hong Kong Committee of French Foreign Trade Advisors (CCEF), La French Tech and its partners at InnoEX 2024 (taking place in Hong Kong from 13 to 16 April). The award recognizes French innovation to promote and support French Tech in the Asia-Pacific region. The final awards ceremony was held on the French pavilion in the presence of members of the Hong Kong Government and Christile Drulhe, Consul General of France in Hong Kong.

Emmanuel Ladent, CEO of CARBIOS: "Asia-Pacific is a key market for our PET biorecycling solution, and the 'So French So Innovative' Award is a recognition that supports CARBIOS’ prospection and commercial deployment in the region. CARBIOS' technology is generating a lot of interest, leading to promising discussions and the exploration of commercial agreements to support the sustainability commitments and international operations of current and future partners."

CARBIOS was awarded 1st prize in the "So French So Innovative" Award organized by Business France, the Hong Kong Committee of French Foreign Trade Advisors (CCEF), La French Tech and its partners at InnoEX 2024 (taking place in Hong Kong from 13 to 16 April). The award recognizes French innovation to promote and support French Tech in the Asia-Pacific region. The final awards ceremony was held on the French pavilion in the presence of members of the Hong Kong Government and Christile Drulhe, Consul General of France in Hong Kong.

Emmanuel Ladent, CEO of CARBIOS: "Asia-Pacific is a key market for our PET biorecycling solution, and the 'So French So Innovative' Award is a recognition that supports CARBIOS’ prospection and commercial deployment in the region. CARBIOS' technology is generating a lot of interest, leading to promising discussions and the exploration of commercial agreements to support the sustainability commitments and international operations of current and future partners."

CARBIOS' global presence
In a dynamic global PET market, where the share of recycled PET will increase, CARBIOS' ambition is to become a leading r-PET player by 2035. CARBIOS has extended its international reach to boost its commercial deployment worldwide. Teams in place in key markets are dedicated to identifying business opportunities and establishing commercial partnerships for PET biorecycling technology, with first agreements expected in 2024. To date, CARBIOS is represented in three regions: Europe, North America (including Canada) and Asia (China, Japan, Korea, Singapore, Taiwan, and soon India).

Weitere Informationen:
Carbios Awards PET recycling
Quelle:

CARBIOS

Wacker Chemical Corporation unter neuer Leitung Foto: WACKER
Christoph Kowitz
16.04.2024

Wacker Chemical Corporation unter neuer Leitung

Christoph Kowitz, derzeit Leiter der WACKER-Konzernforschung, übernimmt Anfang Mai die Leitung der US-Landesgesellschaft Wacker Chemical Corporation (WCC). Er folgt David Wilhoit nach, der seit 2015 für das Nord- und Mittelamerikageschäft des Konzerns verantwortlich war und nun in den Ruhestand geht.

Kowitz war bereits in unterschiedlichsten Führungspositionen tätig. Nach seiner Promotion in den Fächern Organische Chemie und Polymerchemie startete er 1996 seine Berufskarriere als Produktentwickler bei der BASF AG in Ludwigshafen. Von 1997 an war er mehrere Jahre als Unternehmensberater für McKinsey in Asien und in Europa tätig. Nach mehreren Stationen in der chemischen Industrie, unter anderem beim Spezialchemiehersteller Cognis, wechselte Kowitz 2013 zu WACKER, wo er die Leitung der Performance Silicones-Einheit innerhalb des Geschäftsbereichs WACKER SILICONES übernahm. Seit 2018 leitete er die zentrale Konzernforschung und damit auch das Innovationsmanagement im WACKER-Konzern.

Christoph Kowitz, derzeit Leiter der WACKER-Konzernforschung, übernimmt Anfang Mai die Leitung der US-Landesgesellschaft Wacker Chemical Corporation (WCC). Er folgt David Wilhoit nach, der seit 2015 für das Nord- und Mittelamerikageschäft des Konzerns verantwortlich war und nun in den Ruhestand geht.

Kowitz war bereits in unterschiedlichsten Führungspositionen tätig. Nach seiner Promotion in den Fächern Organische Chemie und Polymerchemie startete er 1996 seine Berufskarriere als Produktentwickler bei der BASF AG in Ludwigshafen. Von 1997 an war er mehrere Jahre als Unternehmensberater für McKinsey in Asien und in Europa tätig. Nach mehreren Stationen in der chemischen Industrie, unter anderem beim Spezialchemiehersteller Cognis, wechselte Kowitz 2013 zu WACKER, wo er die Leitung der Performance Silicones-Einheit innerhalb des Geschäftsbereichs WACKER SILICONES übernahm. Seit 2018 leitete er die zentrale Konzernforschung und damit auch das Innovationsmanagement im WACKER-Konzern.

Weitere Informationen:
Wacker chemicals polymers
Quelle:

Wacker Chemie AG

16.04.2024

CARBIOS: Fiscal-year 2023 financial results

  • CARBIOS Group’s solid financial structure: cash position of €192 million on December 31, 2023
  • Construction progress of world’s first PET biorecycling plant in France: in line with delivery targets for customers in 2026
  • Licensing: international sales teams deployed in more than ten countries, with several partnerships feasible for 2024

CARBIOS reported its operating and financial results for the financial year 2023. The financial statements as of December 31, 2023, were approved by the Company’s Board of Directors at their meeting on April 10, 2024.

2023 Financial highlights
The consolidated financial statements of the Company as of December 31, 2023, are presented in accordance with International Financial Reporting Standards (IFRS) as issued by the International Accounting Standards Board (IASB) and adopted by the European Union.

  • CARBIOS Group’s solid financial structure: cash position of €192 million on December 31, 2023
  • Construction progress of world’s first PET biorecycling plant in France: in line with delivery targets for customers in 2026
  • Licensing: international sales teams deployed in more than ten countries, with several partnerships feasible for 2024

CARBIOS reported its operating and financial results for the financial year 2023. The financial statements as of December 31, 2023, were approved by the Company’s Board of Directors at their meeting on April 10, 2024.

2023 Financial highlights
The consolidated financial statements of the Company as of December 31, 2023, are presented in accordance with International Financial Reporting Standards (IFRS) as issued by the International Accounting Standards Board (IASB) and adopted by the European Union.

For 2022 and 2023, these IFRS consolidated financial statements include the financial statements of CARBIOS, the parent company, and the financial statements of its fully integrated subsidiaries Carbiolice and CARBIOS 54. The group formed by CARBIOS, Carbiolice and CARBIOS 54 is hereinafter referred to as the “Group”.

These IFRS financial statements for the Group have been prepared to provide high quality information in line with that of similar companies and based on international standards.

Outlook
Given the progress made by the Group during 2023 and the success of the financing operation closed in July 2023 as well as the received grants, CARBIOS confirms its operating targets and the provisional calendar of the industrial and commercial deployment of its PET biorecycling technology.
2024  • Construction of the Longlaville plant further to permits obtained in October 2023
2024  • Recruitment of plant operations team and training at demonstration facility
2026  • First significant deliveries to clients

Alongside this project, CARBIOS aims to sign its first licensing contracts for its PET biorecycling technology in 2024.

Weitere Informationen:
Carbios financial year 2023
Quelle:

CARBIOS

16.04.2024

Stratasys published Second ESG and Sustainability Report

Stratasys Ltd. published its second Mindful Manufacturing™ ESG and Sustainability Report in accordance with the Global Reporting Initiative (GRI) standards, fulfilling its commitment to transparency. The report includes an extensive overview of activities and advancements in Stratasys’ environmental, social and governance (ESG) programs.

Some highlights of the Mindful Manufacturing ESG and Sustainability report, by category, include:

Environmental

  • Stratasys reduced water intensity by 32.5 percent across global operations, leading to an overall reduction in water usage by the company.
  • Solar panels installed at Israeli facilities generated 441,339 kWh of renewable energy, which contributed to 207 metric tons of reduced CO2 emissions, or the equivalent of planting 3,423 trees
  • Double digit (11.3 percent) increases in the number of spools, cartridges and canisters recycled through a new recycling program.

Social

Stratasys Ltd. published its second Mindful Manufacturing™ ESG and Sustainability Report in accordance with the Global Reporting Initiative (GRI) standards, fulfilling its commitment to transparency. The report includes an extensive overview of activities and advancements in Stratasys’ environmental, social and governance (ESG) programs.

Some highlights of the Mindful Manufacturing ESG and Sustainability report, by category, include:

Environmental

  • Stratasys reduced water intensity by 32.5 percent across global operations, leading to an overall reduction in water usage by the company.
  • Solar panels installed at Israeli facilities generated 441,339 kWh of renewable energy, which contributed to 207 metric tons of reduced CO2 emissions, or the equivalent of planting 3,423 trees
  • Double digit (11.3 percent) increases in the number of spools, cartridges and canisters recycled through a new recycling program.

Social

  • More than 38,000 hours of employee training were provided, equaling 18 hours of training per employee.
  • Approaching world-class status with employee engagement, with a 78 percent participation rate in the last all-employee survey, with an all-time high engagement score of 73.
  • 81 percent of managers participated in management training.
  • 4 diversity KPIs were set in 2022, focusing on hiring practices. Targets were:
  • 100 percent of candidate slates for manager and above will have a diverse slate
  • 35 percent of management hires will be women
  • 25 percent of tech hires will be women
  • 40 percent of intern/student hires to reflect a range of ethnicity and gender diversity.

Governance

  • 100 percent of new suppliers in 2021 and 2022 signed the Supplier Code of Conduct, which includes environmental, social and ethical standards.
  • More than 97% of all employees completed compliance training.
  • No product-related health and safety incidents of non-compliance occurred in 2021 or 2022.
Quelle:

Stratasys Ltd.

12.04.2024

NCTO: State of the U.S. Textile Industry Address

National Council of Textile Organizations (NCTO) Chairman Norman Chapman delivered the trade association’s State of the U.S. Textile Industry overview at NCTO’s 20th Annual Meeting on April 11.

Mr. Chapman’s speech highlighted the severe economic challenges confronting the U.S. textile industry that have been exacerbated by predatory trade behavior and customs fraud that is harming this vital and strategic domestic supply chain. He also highlighted NCTO’s effective advocacy efforts that resulted in a long list of accomplishments to counter some of the damaging illegal trade practices and bolster the industry.

National Council of Textile Organizations (NCTO) Chairman Norman Chapman delivered the trade association’s State of the U.S. Textile Industry overview at NCTO’s 20th Annual Meeting on April 11.

Mr. Chapman’s speech highlighted the severe economic challenges confronting the U.S. textile industry that have been exacerbated by predatory trade behavior and customs fraud that is harming this vital and strategic domestic supply chain. He also highlighted NCTO’s effective advocacy efforts that resulted in a long list of accomplishments to counter some of the damaging illegal trade practices and bolster the industry.

“While the domestic textile industry is a key contributor to the U.S. economy and a critical part of the military and public health industrial base, our sector is facing a crisis of historic proportions as the result of rapidly deteriorating market conditions coupled with unchecked foreign predatory trade practices and diminished customs enforcement activities, Chapman stated in the speech. “At the end of the day, some key fundamentals for the U.S. textile industry remained sound, while others weakened. While we expect to see ongoing challenges this year, which will test our resolve, we know collectively as an industry this will not weaken our resilience or our innovative spirit.”

Quelle:

National Council of Textile Organizations

Norman Virks, Michael Steinert, Tim Steinert Foto: SN-Verlag
Norman Virks, Michael Steinert, Tim Steinert
12.04.2024

SN-Verlag erweitert Geschäftsführung

Neben Verleger Michael Steinert und dessen Sohn Tim Steinert ist seit 1. April 2024 mit Norman Virks ein dritter Geschäftsführer an Bord.

Der 42-Jährige stammt gebürtig aus Kassel und ist studierter Diplom-Ökonom. Er war seit 2013 als Leiter der Joka Fachberater Marketing Kooperation des Großhändlers Jordan tätig und führte bis zu seinem kürzlichen Ausscheiden auch die Geschäfte der W. & L. Jordan Stiftung.

Beim SN Verlag wird Virks vor allem für die Leitung und Organisation der Branchenmessen "Hometex Sommer" und "Hometex Herbst" verantwortlich zeichnen, die ab 2025 vom SN Verlag ausgerichtet werden.

Neben Verleger Michael Steinert und dessen Sohn Tim Steinert ist seit 1. April 2024 mit Norman Virks ein dritter Geschäftsführer an Bord.

Der 42-Jährige stammt gebürtig aus Kassel und ist studierter Diplom-Ökonom. Er war seit 2013 als Leiter der Joka Fachberater Marketing Kooperation des Großhändlers Jordan tätig und führte bis zu seinem kürzlichen Ausscheiden auch die Geschäfte der W. & L. Jordan Stiftung.

Beim SN Verlag wird Virks vor allem für die Leitung und Organisation der Branchenmessen "Hometex Sommer" und "Hometex Herbst" verantwortlich zeichnen, die ab 2025 vom SN Verlag ausgerichtet werden.

Weitere Informationen:
SN-Verlag Geschäftsführung
Quelle:

SN-Verlag

10.04.2024

Südwesttextil begrüßt zentrale Ausländerbehörde für Fachkräfte in Baden-Württemberg

Der Wirtschafts- und Arbeitgeberverband Südwesttextil begrüßt die Ankündigung der Landesregierung, eine zentrale Ausländerbehörde für Fachkräfte einzurichten.
Die grün-schwarze Landesregierung hat sich auf Eckpunkte für die Einrichtung einer Landesagentur für Zuwanderung von Fachkräften geeinigt.
Zuständig sollen zwei Ministerien, das Ministerium der Justiz und für Migration und – für Berufe aus dem Bereich Gesundheit und Pflege – das Ministerium für Soziales, Gesundheit und Integration, sein. Durch die zentrale Organisation sollen in Zukunft die Vorgänge deutlich beschleunigt werden und Baden-Württemberg attraktiver für Fachkräfte aus dem Ausland werden.

Hauptgeschäftsführerin Edina Brenner: „Die Zentralisierung der Zuständigkeiten und die Bündelung der Kompetenzen bei einer Behörde sorgen für eine erhöhte Transparenz für unsere mittelständisch geprägte Textil- und Bekleidungsindustrie. Sich an eine Stelle wenden zu können, die den komplexen Prozess der Fachkräfteeinwanderung mit allen erforderlichen Voraussetzungen steuert und auch im Einzelfall entscheiden kann, wird hoffentlich große Entlastung und eine Beschleunigung der Verfahren bringen.“

Der Wirtschafts- und Arbeitgeberverband Südwesttextil begrüßt die Ankündigung der Landesregierung, eine zentrale Ausländerbehörde für Fachkräfte einzurichten.
Die grün-schwarze Landesregierung hat sich auf Eckpunkte für die Einrichtung einer Landesagentur für Zuwanderung von Fachkräften geeinigt.
Zuständig sollen zwei Ministerien, das Ministerium der Justiz und für Migration und – für Berufe aus dem Bereich Gesundheit und Pflege – das Ministerium für Soziales, Gesundheit und Integration, sein. Durch die zentrale Organisation sollen in Zukunft die Vorgänge deutlich beschleunigt werden und Baden-Württemberg attraktiver für Fachkräfte aus dem Ausland werden.

Hauptgeschäftsführerin Edina Brenner: „Die Zentralisierung der Zuständigkeiten und die Bündelung der Kompetenzen bei einer Behörde sorgen für eine erhöhte Transparenz für unsere mittelständisch geprägte Textil- und Bekleidungsindustrie. Sich an eine Stelle wenden zu können, die den komplexen Prozess der Fachkräfteeinwanderung mit allen erforderlichen Voraussetzungen steuert und auch im Einzelfall entscheiden kann, wird hoffentlich große Entlastung und eine Beschleunigung der Verfahren bringen.“

Voraussetzung dafür, ist aus Perspektive des Arbeitgeber- und Wirtschaftsverbands, die entsprechende Ausstattung mit personellen Ressourcen, die Digitalisierung und Verringerung von Bürokratie: „Wir haben das weiterentwickelte Fachkräfteeinwanderungsgesetz des Bundes als innovative, politische Trendwende begrüßt – gleichzeitig sind die Neuregelungen sehr komplex. Wir brauchen eine deutliche Verkürzung der Dauer der bisherigen und jetzt neuen Verfahren. Die Landesagentur für Zuwanderung von Fachkräften muss von Anfang an dafür ausgestattet sein. Dienstleistungsorientierte, proaktive Prozessabläufen von Behörden sind essenzieller Bestandteil einer Willkommenskultur für eine erfolgreiche Fachkräfteeinwanderung.“

Quelle:

Verband der Südwestdeutschen Textil- und Bekleidungsindustrie Südwesttextil e.V.

Michael Steidle leitet die Mayer GmbH TechConcepts, ehemals Textildruckerei Heinrich Mayer. Foto Mayer GmbH TechConcepts
Michael Steidle leitet die Mayer GmbH TechConcepts, ehemals Textildruckerei Heinrich Mayer.
09.04.2024

Aus Textildruckerei Mayer wird Mayer GmbH TechConcepts

Die Textildruckerei Mayer heißt von nun an “Mayer GmbH TechConcepts”. Das Unternehmen hat im Jahr seines 50-jährigen Bestehens die Umfirmierung vollzogen, die dem Wandel des Portfolios Rechnung trägt. Im Jahr 1974 war Unternehmensgründer Heinrich Mayer mit klassischem Textildruck in den Markt eingetreten. Heute bietet Mayer TechConcepts unter der Leitung von Michael Steidle, Schwiegersohn des Gründers, Lösungen im Bereich der Sensorik, Aktorik sowie 3D-Hartbeschichtungen an.

Zusammen mit seiner Frau Claudia führt er die Mayer GmbH TechConcepts, wie das Unternehmen offiziell seit Ende Februar 2024 heißt, in zweiter Generation. Textilien sind zwar weiterhin Teil des Portfolios, die Bandbreite wurde jedoch deutlich vergrößert. Beschichtet werden auch andere Materialien von Plastik und Metallen bis Kunstleder.

Das Unternehmen lebt von seinen technischen Lösungen. Neben Keramikbeschichtung sind das vor allem Flächenlösungen mit Sensorik, beispielsweise ein leicht formbares Material ausgestattet mit einem flächigen Drucksensor, welches bei medizinischen Geräten zum Einsatz kommt. Ein anderes Beispiel ist eine Flächenheizung, die durch Druck aktiviert wird.

Die Textildruckerei Mayer heißt von nun an “Mayer GmbH TechConcepts”. Das Unternehmen hat im Jahr seines 50-jährigen Bestehens die Umfirmierung vollzogen, die dem Wandel des Portfolios Rechnung trägt. Im Jahr 1974 war Unternehmensgründer Heinrich Mayer mit klassischem Textildruck in den Markt eingetreten. Heute bietet Mayer TechConcepts unter der Leitung von Michael Steidle, Schwiegersohn des Gründers, Lösungen im Bereich der Sensorik, Aktorik sowie 3D-Hartbeschichtungen an.

Zusammen mit seiner Frau Claudia führt er die Mayer GmbH TechConcepts, wie das Unternehmen offiziell seit Ende Februar 2024 heißt, in zweiter Generation. Textilien sind zwar weiterhin Teil des Portfolios, die Bandbreite wurde jedoch deutlich vergrößert. Beschichtet werden auch andere Materialien von Plastik und Metallen bis Kunstleder.

Das Unternehmen lebt von seinen technischen Lösungen. Neben Keramikbeschichtung sind das vor allem Flächenlösungen mit Sensorik, beispielsweise ein leicht formbares Material ausgestattet mit einem flächigen Drucksensor, welches bei medizinischen Geräten zum Einsatz kommt. Ein anderes Beispiel ist eine Flächenheizung, die durch Druck aktiviert wird.

Ende April zeigt Mayer TechConcepts auf der Techtextil in Frankfurt seine neusten Entwicklungen. Dazu gehören ultradünne, flexible Sensorflächen, die das Unternehmen im Endlosdruck herstellt. Sie eignen sich beispielsweise für eine automatische Abschaltlösung bei medizinischen Geräten. Mit Sensorik und Aktorik ausgestattete Flächenlösungen bis 1,6 m² finden außerdem als hochwertige und smarte Auto-Interieurs ihre Anwendung. Des Weiteren präsentiert das Unternehmen seine neuen Bio-Polyurethane, die Mayer TechConcepts für seine patentierte CERAPUR Keramikbeschichtung einsetzt.

Quelle:

Mayer GmbH TechConcepts

John Lewis Partnership appoints new Chairman (c) John Lewis Partnership
Jason Tarry
08.04.2024

John Lewis Partnership appoints new Chairman

The John Lewis Partnership announces the appointment of Jason Tarry as its seventh Chairman following Sharon White’s decision to step down at the end of her term.

Jason brings over 33 years of experience at Tesco where he was most recently the UK & Ireland CEO, a role he held for six years. His experience spans grocery, general merchandise and fashion in senior commercial, operational and general management positions, having joined the Tesco graduate programme in 1990.

In addition to delivering market leading grocery performance in the UK, he led the expansion of F&F Clothing across Europe as Group CEO. Jason is expected to take up the role in September, at which point Sharon will step down and support the transition as required.

The John Lewis Partnership announces the appointment of Jason Tarry as its seventh Chairman following Sharon White’s decision to step down at the end of her term.

Jason brings over 33 years of experience at Tesco where he was most recently the UK & Ireland CEO, a role he held for six years. His experience spans grocery, general merchandise and fashion in senior commercial, operational and general management positions, having joined the Tesco graduate programme in 1990.

In addition to delivering market leading grocery performance in the UK, he led the expansion of F&F Clothing across Europe as Group CEO. Jason is expected to take up the role in September, at which point Sharon will step down and support the transition as required.

Rita Clifton, Deputy Chairman and Chair of the Nomination Committee, said: “The Board extends its huge thanks to Sharon for successfully leading the Partnership through one of the most testing periods in its history - first Covid and then the cost of living crisis. She has faced into the toughest decisions and overseen the Partnership's financial recovery; we are in good financial health with a return to profit, and have a strong balance sheet with record investment planned this year. Sharon has also helped ensure that employee ownership of the Partnership is secure, is demonstrably focused on its purpose as a force for good and with an open and inclusive culture.

“As the Partnership moves into the next phase of its modernisation focused on our core retail business as well future growth, we are confident that Jason will provide the kind of inspirational leadership, a proven track record in multi-channel, multi-category retail success and a strong identification with Partnership values that we are seeking in this role. Jason has impressed everyone throughout the interview process with his warmth, his belief in the Partnership’s ideals and democratic principles and his appreciation for our unique and special brands.”

Weitere Informationen:
John Lewis Partnership Chairman
Quelle:

John Lewis Partnership

Freudenberg: Standort Sant’Omero implementiert ZDHC (c) Freudenberg Performance Materials
08.04.2024

Freudenberg: Standort Sant’Omero implementiert ZDHC

Freudenberg Performance Materials Apparel Europe (Freudenberg) erreicht einen weiteren Meilenstein in Sachen Nachhaltigkeit: Das neue Freudenberg Apparel Competence Center im italienischen Sant’Omero hat kürzlich das 4sustainability® Chemical Management Protocol (4s CHEM) erfolgreich durchlaufen und das Advanced Level erreicht. Das Protokoll zielt darauf ab, schädliche und gefährliche Chemikalien und damit verbundene Risiken im gesamten Produktionsprozess zu vermeiden.

Freudenberg Performance Materials Apparel Europe (Freudenberg) erreicht einen weiteren Meilenstein in Sachen Nachhaltigkeit: Das neue Freudenberg Apparel Competence Center im italienischen Sant’Omero hat kürzlich das 4sustainability® Chemical Management Protocol (4s CHEM) erfolgreich durchlaufen und das Advanced Level erreicht. Das Protokoll zielt darauf ab, schädliche und gefährliche Chemikalien und damit verbundene Risiken im gesamten Produktionsprozess zu vermeiden.

Kompetenzzentrum für Einlagestoffe
Freudenberg hat sein Apparel Competence Center in Sant’Omero im Mai 2023 eröffnet. Der italienische Standort ist ein innovatives Kompetenzzentrum, das Bekleidungseinlagen aus Vliesstoffen, Geweben und Gewirken für die Apparel-Kunden in Europa beschichtet und veredelt.
Nun hat Freudenberg den nächsten logischen Schritt gemacht: Das Apparel Competence Center hat im Rahmen eines umfassenden Audits ZDHC-Richtlinien in seinen Produktionsprozess implementiert. Dafür hat Freudenberg das Beratungsunternehmen Process Factory hinzugezogen, das auf Nachhaltigkeitsthemen spezialisiert ist. Mit der Unterstützung dieser Experten hat der Freudenberg Standort in Sant’Omero das Advanced Level des 4sustainability® Chemical Management Protocol (4s CHEM), in Übereinstimmung mit dem ZDHC Roadmap to Zero Programm, erreicht.
Die Überprüfung der Implementierung erfolgt jährlich auf Basis dieses Protokolls und bietet Unternehmen der Modeindustrie ein hohes Maß an Sicherheit. Denn sie gewährleistet eine strukturierte, vollständig nachvollziehbare Vorgehensweise, regelmäßiges Monitoring und kontinuierliche Kontrollen der Produktionsprozesse bei Freudenberg.

ZDHC
Mit dem nachweislichen Verzicht auf umweltschädigende Chemikalien und Substanzen unterstreicht das Apparel Competence Center, dass Verantwortung für Mensch und Umwelt bei Freudenberg höchste Priorität hat.
Die Zero Discharge of Hazardous Chemicals (ZDHC) Foundation und deren weltweit anerkanntes Programm Roadmap to Zero zielen darauf ab, die Freisetzung gefährlicher Chemikalien in der Lieferkette der Textil- und Bekleidungsindustrie zu eliminieren. Grundlage hierfür ist die ZDHC Manufacturing Restricted Substances List (ZDHC MRSL).
Mit der Anwendung des 4s CHEM Protocol sendet der Produktionsstandort in Sant’Omero ein klares Signal an die Modeindustrie, dass Freudenberg-Produkte nicht nur die höchsten Qualitätsstandards erfüllen, sondern auch umweltfreundlich und sicher sind.

Quelle:

Freudenberg Performance Materials Holding GmbH

08.04.2024

Modeunternehmen Sara Linke GmbH erfolgreich saniert

Das Modeunternehmen „Sara Linke GmbH“ hat wieder eine Zukunft außerhalb der Insolvenz: Die Gläubiger haben einstimmig den Insolvenzplan angenommen und damit den Weg freigemacht für die Aufhebung des Verfahrens. Das Unternehmen wird sich künftig auf die Vermarktung der eigenen Designer-Kollektion „Sara Linke“ konzentrieren sowie Dienstleistungen für Kunden aus der Textil- und Bekleidungsbranche anbieten.

Grundlage für den Sanierungsplan ist eine neue strategische Ausrichtung des Unternehmens: So wird die Sara Linke GmbH künftig keine eigene Produktion mehr unterhalten und sich auf zwei Geschäftsbereiche konzentrieren: Zum einen den Vertrieb des erfolgreichen eigenen Designerlabels „Sara Linke“, das über den Onlineshop www.saralinke.com sowie weitere Online-Plattformen, Boutiquen und Shop-in-Shop-Geschäfte angeboten wird. Die neue Sommerkollektion wird Mitte April an den Start gehen.

Das Modeunternehmen „Sara Linke GmbH“ hat wieder eine Zukunft außerhalb der Insolvenz: Die Gläubiger haben einstimmig den Insolvenzplan angenommen und damit den Weg freigemacht für die Aufhebung des Verfahrens. Das Unternehmen wird sich künftig auf die Vermarktung der eigenen Designer-Kollektion „Sara Linke“ konzentrieren sowie Dienstleistungen für Kunden aus der Textil- und Bekleidungsbranche anbieten.

Grundlage für den Sanierungsplan ist eine neue strategische Ausrichtung des Unternehmens: So wird die Sara Linke GmbH künftig keine eigene Produktion mehr unterhalten und sich auf zwei Geschäftsbereiche konzentrieren: Zum einen den Vertrieb des erfolgreichen eigenen Designerlabels „Sara Linke“, das über den Onlineshop www.saralinke.com sowie weitere Online-Plattformen, Boutiquen und Shop-in-Shop-Geschäfte angeboten wird. Die neue Sommerkollektion wird Mitte April an den Start gehen.

Das zweite Standbein bilden Dienstleistungen rund um Design, Entwicklung und Produktion für Textil- und Bekleidungsunternehmen. Dieser Geschäftsbereich wird künftig unter „Studio 1912“ firmieren. Die neue Homepage ist bereits online, der neue Standort in Zwickau wird am 12. April eröffnet. „Mit der neuen strategischen Ausrichtung können wir unser Design- und Produktions-Know-how Dritten als Dienstleistung zugänglich machen und gleichzeitig unser eigenes erfolgreiches Label für extrovertierte Designermode weiter voranbringen“, so Geschäftsführerin Sara Linke.

Die Sara Linke GmbH hatte im März 2023 ein Insolvenzverfahren in Eigenverwaltung beantragt. Hintergrund waren die Auswirkungen der Corona-Pandemie auf den Textil-Einzelhandel sowie gestiegene Kosten für Material und Personal, die vor allem die Produktion belasteten. Im Zuge des Eigenverwaltungsverfahrens wurde das Unternehmen strategisch neu und mit einer schlankeren Kostenstruktur ausgerichtet.

Weitere Informationen:
Sara Linke GmbH Insolvenz
Quelle:

Sara Linke GmbH

05.04.2024

Dassault Systèmes: Arena nutzt 3DEXPERIENCE für Prototypenentwicklung

Dassault Systèmes hat bekannt gegeben, dass der Schwimmbekleidungsanbieter Arena 3DEXPERIENCE Works von Dassault Systèmes einsetzt. Arena ist einer der führenden Anbieter von Schwimmbekleidung und ein zunehmend wichtiger Akteur im Sport-Lifestyle-Segment.

Mit 3DEXPERIENCE Works erweitert Arena den bisherigen Einsatz der SOLIDWORKS-Anwendungen von Dassault Systèmes auf die 3DEXPERIENCE Plattform. Diese bietet Zugang zu einem Portfolio von Design-, Simulations- und Kollaborationsanwendungen in der Cloud, die auf die Anforderungen von Arena zugeschnitten sind.

In einer virtuellen Umgebung arbeiten Entwicklungsteams und Partner von Arena zusammen und nutzen Informationen und Feedback in Echtzeit. Auf der Plattform entwickeln, testen und optimieren sie virtuelle Zwillinge von Produkten und reduzieren gleichzeitig die Anzahl physischer Prototypen sowie dafür benötigte Zeit und Ressourcen. So konnte das Unternehmen den Prototyping-Zyklus für seine Schwimmbrillen um 70 Prozent verkürzen und die Markteinführungszeit beschleunigen.

Dassault Systèmes hat bekannt gegeben, dass der Schwimmbekleidungsanbieter Arena 3DEXPERIENCE Works von Dassault Systèmes einsetzt. Arena ist einer der führenden Anbieter von Schwimmbekleidung und ein zunehmend wichtiger Akteur im Sport-Lifestyle-Segment.

Mit 3DEXPERIENCE Works erweitert Arena den bisherigen Einsatz der SOLIDWORKS-Anwendungen von Dassault Systèmes auf die 3DEXPERIENCE Plattform. Diese bietet Zugang zu einem Portfolio von Design-, Simulations- und Kollaborationsanwendungen in der Cloud, die auf die Anforderungen von Arena zugeschnitten sind.

In einer virtuellen Umgebung arbeiten Entwicklungsteams und Partner von Arena zusammen und nutzen Informationen und Feedback in Echtzeit. Auf der Plattform entwickeln, testen und optimieren sie virtuelle Zwillinge von Produkten und reduzieren gleichzeitig die Anzahl physischer Prototypen sowie dafür benötigte Zeit und Ressourcen. So konnte das Unternehmen den Prototyping-Zyklus für seine Schwimmbrillen um 70 Prozent verkürzen und die Markteinführungszeit beschleunigen.

Dassault Systèmes hat 3DEXPERIENCE Works im Jahr 2019 als Anwendungsportfolio auf der 3DEXPERIENCE Plattform eingeführt. Dieses richtet sich an bestehende SOLIDWORKS-Kunden sowie kleine und mittelständische Unternehmen.

Quelle:

Dassault Systèmes

LFDY: Kollektion mit Amsterdamer Coffee Shop "The Bulldog" (c) LFDY
05.04.2024

LFDY: Kollektion mit Amsterdamer Coffee Shop "The Bulldog"

Die LFDY x THE BULLDOG Capsule Collection vereint LFDY und The Bulldog, den ältesten Coffee Shop in Amsterdam. In Anspielung auf die Legalisierung in Deutschland setzt die Kollaboration, bestehend aus Kleidung und Rolling Tools, ein politisches Statement. LFDY feiert den Launch der Kollektion am 06. April mit einem Store Event in ihrem Amsterdamer Standort am Vorabend. Teile der Cannabis-Subkultur wurden in der Vergangenheit immer wieder in Kollektionen oder Visuals der Marke aufgegriffen, so gab es bereits Grinder, Papes oder Feuerzeuge von LFDY. Mit Artworks, die von Filmen wie „La Haine“ inspiriert waren, stellte LFDY immer wieder einen Bezug zu dieser Welt her.   

Die Kooperation zwischen The Bulldog und LFDY verbindet die niederländische Underground- mit der Streetwear-Szene. Die gemeinsame LFDY x THE BULLDOG Capsule Collection umfasst eine breite Palette an Hoodies, T-Shirts, Overshirts, Baggy Pants, Mützen, Caps und Smoking-Accessoires. Der Live-Fast-Schriftzug wird durch den charakteristischen Bulldoggenkopf in flächigen Retro-Prints ergänzt.

Die LFDY x THE BULLDOG Capsule Collection vereint LFDY und The Bulldog, den ältesten Coffee Shop in Amsterdam. In Anspielung auf die Legalisierung in Deutschland setzt die Kollaboration, bestehend aus Kleidung und Rolling Tools, ein politisches Statement. LFDY feiert den Launch der Kollektion am 06. April mit einem Store Event in ihrem Amsterdamer Standort am Vorabend. Teile der Cannabis-Subkultur wurden in der Vergangenheit immer wieder in Kollektionen oder Visuals der Marke aufgegriffen, so gab es bereits Grinder, Papes oder Feuerzeuge von LFDY. Mit Artworks, die von Filmen wie „La Haine“ inspiriert waren, stellte LFDY immer wieder einen Bezug zu dieser Welt her.   

Die Kooperation zwischen The Bulldog und LFDY verbindet die niederländische Underground- mit der Streetwear-Szene. Die gemeinsame LFDY x THE BULLDOG Capsule Collection umfasst eine breite Palette an Hoodies, T-Shirts, Overshirts, Baggy Pants, Mützen, Caps und Smoking-Accessoires. Der Live-Fast-Schriftzug wird durch den charakteristischen Bulldoggenkopf in flächigen Retro-Prints ergänzt.

Weitere Informationen:
LFDY Streetwear Kollektion streetwear
Quelle:

LFDY

Zusammen mit Prof. Dr. Klaus Müller als CFO Eva Baumann sie die Geschäftsführung der international agierenden CHT Gruppe. Foto CHT Gruppe
05.04.2024

Eva Baumann neue CEO der CHT Gruppe

Mit dem 1. April 2024 übernimmt Eva Baumann die Position der CEO bei CHT. Zusammen mit Prof. Dr. Klaus Müller als CFO bildet sie die Geschäftsführung der international agierenden CHT Gruppe.

Bis zum Jahr 2020 war Eva Baumann über viele Jahre in einem weltweit führenden Unternehmen der chemischen Industrie tätig. Seit Januar 2020 ist sie Teil der CHT Gruppe und hat als Group Vice President den Bereich General Industries auf Gruppenebene geleitet. Ab sofort verantwortet sie als CEO die Bereiche Marketing, Vertrieb Unternehmensstrategie, Personal und Nachhaltigkeit.

Eva Baumann hat große Pläne für die Zukunft: „Gemeinsam mit meinem Führungsteam werde ich die CHT Gruppe als erfolgreiche und profitable Unternehmensgruppe der Spezialchemie weiter ausbauen. Wir setzen auf das, was wir seit über 70 Jahren gut können: innovative Ideen in Spezialanwendungen umzusetzen. Diese Ideen unterstützen unsere Kunden dabei, ihren Erfolg zu sichern und gleichzeitig einen nachhaltigen Beitrag zur Entwicklung zu leisten. Unsere Kundennähe sowie die herausragende Qualität unserer Produkte und Serviceleistungen differenzieren uns im Markt.“

Mit dem 1. April 2024 übernimmt Eva Baumann die Position der CEO bei CHT. Zusammen mit Prof. Dr. Klaus Müller als CFO bildet sie die Geschäftsführung der international agierenden CHT Gruppe.

Bis zum Jahr 2020 war Eva Baumann über viele Jahre in einem weltweit führenden Unternehmen der chemischen Industrie tätig. Seit Januar 2020 ist sie Teil der CHT Gruppe und hat als Group Vice President den Bereich General Industries auf Gruppenebene geleitet. Ab sofort verantwortet sie als CEO die Bereiche Marketing, Vertrieb Unternehmensstrategie, Personal und Nachhaltigkeit.

Eva Baumann hat große Pläne für die Zukunft: „Gemeinsam mit meinem Führungsteam werde ich die CHT Gruppe als erfolgreiche und profitable Unternehmensgruppe der Spezialchemie weiter ausbauen. Wir setzen auf das, was wir seit über 70 Jahren gut können: innovative Ideen in Spezialanwendungen umzusetzen. Diese Ideen unterstützen unsere Kunden dabei, ihren Erfolg zu sichern und gleichzeitig einen nachhaltigen Beitrag zur Entwicklung zu leisten. Unsere Kundennähe sowie die herausragende Qualität unserer Produkte und Serviceleistungen differenzieren uns im Markt.“

Weitere Informationen:
CHT Gruppe
Quelle:

CHT Group

STOLL: Flachgestrickte Balaclava im Design Museum in New York (c) KARL MAYER Group
05.04.2024

STOLL: Flachgestrickte Balaclava im Design Museum in New York

Die am 16. März eröffnete Ausstellung „Acquired! Shaping the National Design Collection“ des Cooper Hewitt, Smithsonian Design Museum zeigt ein STOLL-Exponat, das sich seit 2017 in der permanenten Sammlung des Museums befindet.

Den Besucher erwarten mehr als 150 Werke, zusammengestellt aus der Sammlung des Museums und aus Stücken, die seit 2017 neu erworben wurden. Die Auswahl, die Arbeiten von Design-Pionieren der jüngeren Vergangenheit zeigt, enthält auch eine hochfunktionelle Balaclava von STOLL.

Mischung aus Design und Funktionalität
Die flachgestrickte Balaclava von STOLL gehört zu einem Ausstellungs-Areal, das die prägenden Themen unserer Zeit visualisiert. Neben einem Hidschab steht sie für die Berücksichtigung der Inklusivität beim Design. Die Schlupfmütze bietet Schutz gegen extreme Kälte, sieht zudem stylisch aus und ist das Ergebnis eines Zusammenspiels von Kreativität und Technologie.

Die am 16. März eröffnete Ausstellung „Acquired! Shaping the National Design Collection“ des Cooper Hewitt, Smithsonian Design Museum zeigt ein STOLL-Exponat, das sich seit 2017 in der permanenten Sammlung des Museums befindet.

Den Besucher erwarten mehr als 150 Werke, zusammengestellt aus der Sammlung des Museums und aus Stücken, die seit 2017 neu erworben wurden. Die Auswahl, die Arbeiten von Design-Pionieren der jüngeren Vergangenheit zeigt, enthält auch eine hochfunktionelle Balaclava von STOLL.

Mischung aus Design und Funktionalität
Die flachgestrickte Balaclava von STOLL gehört zu einem Ausstellungs-Areal, das die prägenden Themen unserer Zeit visualisiert. Neben einem Hidschab steht sie für die Berücksichtigung der Inklusivität beim Design. Die Schlupfmütze bietet Schutz gegen extreme Kälte, sieht zudem stylisch aus und ist das Ergebnis eines Zusammenspiels von Kreativität und Technologie.

Die Sturmhaube integriert einen NFC-Chip für die Nahfeldkommunikation, eine Heizung für die Erwärmung der Atemluft, einen Anschluss mit Plus- und Minuspol zur Stromversorgung und Reflexionsstreifen, die für passive Sichtbarkeit sorgen. Alle Komponenten sind jeweils direkt in die Ware eingestrickt. Die Grundlage für die Integration ohne Zwischenschritte ist die Flachstricktechnologie von STOLL. Auch Schaltkreise und leitfähige Garne können damit in einem vollautomatischen Prozess exakt an ihrem Bestimmungsort eingearbeitet werden.

Weitere Performance-Features kommen ohne Zusatzkomponenten aus. So bietet ein vorgeformtes 3D-Design – möglich durch die Spickeltechnik – eine perfekte Passform, indem es der Anatomie folgt und aufwändige Konfektion erübrigt.

Weitere Informationen:
Stoll Karl Mayer Group
Quelle:

KARL MAYER Group

adidas SPZL: Pre-spring 2024 Collection (c) adidas AG
03.04.2024

adidas SPZL: Pre-spring 2024 Collection

First launched in 2014, 2024 marks 10 years since Spezial's inception. Ringing in this landmark anniversary, Gary Aspden and the three stripes chart a course through the label’s past, present, and future – their latest collection telling the timeless story of adidas’ design DNA.

Headlining the collection is the Todmorden Smock. First released in Spring Summer 2021 to an immediate sell out, this season the coveted style returns in two colourways: navy and white. A commemorative 10th anniversary Mod Trefoil tee then brings the Spezial spirit to life as a certified collectors item.  
 
Two lightweight jackets – the Trentham and the Wingrove – constitute spring layering items, while the matching Angelzarke track top and track pants are awash with signature Spezial details. The apparel offering is then rounded out by the Rossendale Short, a Polo shirt, and the Lytham tee.
 
The accessories offering comprises of the Brinscall bag, a Mod Trefoil cap, a two pack of socks, and a Mod Trefoil towel.  

This drop is brought to life by a campaign film featuring actor and musician Ashley Walters.

First launched in 2014, 2024 marks 10 years since Spezial's inception. Ringing in this landmark anniversary, Gary Aspden and the three stripes chart a course through the label’s past, present, and future – their latest collection telling the timeless story of adidas’ design DNA.

Headlining the collection is the Todmorden Smock. First released in Spring Summer 2021 to an immediate sell out, this season the coveted style returns in two colourways: navy and white. A commemorative 10th anniversary Mod Trefoil tee then brings the Spezial spirit to life as a certified collectors item.  
 
Two lightweight jackets – the Trentham and the Wingrove – constitute spring layering items, while the matching Angelzarke track top and track pants are awash with signature Spezial details. The apparel offering is then rounded out by the Rossendale Short, a Polo shirt, and the Lytham tee.
 
The accessories offering comprises of the Brinscall bag, a Mod Trefoil cap, a two pack of socks, and a Mod Trefoil towel.  

This drop is brought to life by a campaign film featuring actor and musician Ashley Walters.

Weitere Informationen:
adidas AG adidas
Quelle:

adidas AG

INDA remembers CK Wong (c) INDA
03.04.2024

INDA remembers CK Wong

INDA is warmly remembering CK Wong, a veteran of the nonwovens industry for more than five decades and long-time member of INDA’s Board of Directors and Executive Committee. Wong passed away on March 22, 2024 at the age of 86.

Wong recognized the importance of the emerging nonwovens industry in the early 1970s. He began his career in the 1980s as a marketing consultant and, one year later, Wong set up his corporate headquarters in Hong Kong to convert nonwoven roll goods into disposable medical and industrial protection products. Over the past 35 years, Wong’s business grew to include household, beauty salon, sports applications, and other value-added products.

In 1994 Wong’s company officially became U.S. Pacific Nonwovens Industry Limited. His business expanded with a new converting plant in Dongguan, China, and in 2007 he invested in an adjacent building to handle his growing business. In 2018 Wong’s business broadened to include manufacturing PLA nonwovens. In addition to converted products, Wong’s business provided sales, service, and training for nonwovens equipment.

INDA is warmly remembering CK Wong, a veteran of the nonwovens industry for more than five decades and long-time member of INDA’s Board of Directors and Executive Committee. Wong passed away on March 22, 2024 at the age of 86.

Wong recognized the importance of the emerging nonwovens industry in the early 1970s. He began his career in the 1980s as a marketing consultant and, one year later, Wong set up his corporate headquarters in Hong Kong to convert nonwoven roll goods into disposable medical and industrial protection products. Over the past 35 years, Wong’s business grew to include household, beauty salon, sports applications, and other value-added products.

In 1994 Wong’s company officially became U.S. Pacific Nonwovens Industry Limited. His business expanded with a new converting plant in Dongguan, China, and in 2007 he invested in an adjacent building to handle his growing business. In 2018 Wong’s business broadened to include manufacturing PLA nonwovens. In addition to converted products, Wong’s business provided sales, service, and training for nonwovens equipment.

Wong was an active member at INDA since the late 90s. He served as Vice Chair of Finance on the Board of Directors for many years before becoming an Appointee on INDA’s Executive Committee. Wong was instrumental in helping INDA set up partnerships with key contacts and associations in China. He was also the Honorable Chairman for the Guangdong Nonwovens Association (GDNA) and the China Nonwovens & Industrial Textiles Association (Spunbond Division).

Weitere Informationen:
INDA nonwovens
Quelle:

INDA, the Association of the Nonwoven Fabrics Industry