Aus der Branche

Zurücksetzen
42 Ergebnisse
27.03.2024

Mimaki Demo Days: Offener Showroom in München

Mimaki Deutschland wird von April bis September 2024 jeden Monat Tage des offenen Showrooms aka „Mimaki Demo Days“, abhalten. In diesen Tagen wird es jedem Endkunden und Interessenten ermöglicht, eine individuelle Demonstration direkt bei Mimaki zu erleben. Eigene Druckdaten und Medien können mitgebracht werden.

„Mit den Mimaki Demo Days soll unser Kontakt zum Markt gestärkt und auch der Zugang vom Anwender zu neuesten Technologien erleichtert werden“, erklärt Hisashi Takeuchi, Geschäftsführer der Mimaki Deutschland GmbH die Intention. Alle Mimaki Demo Days dauern zehn Arbeitstage und innerhalb dieser Zeit können die Interessenten ihren Besuch mit dem Mimaki-Team planen.

Dafür gibt es mehrere Anreize für die Besucher:

Mimaki Deutschland wird von April bis September 2024 jeden Monat Tage des offenen Showrooms aka „Mimaki Demo Days“, abhalten. In diesen Tagen wird es jedem Endkunden und Interessenten ermöglicht, eine individuelle Demonstration direkt bei Mimaki zu erleben. Eigene Druckdaten und Medien können mitgebracht werden.

„Mit den Mimaki Demo Days soll unser Kontakt zum Markt gestärkt und auch der Zugang vom Anwender zu neuesten Technologien erleichtert werden“, erklärt Hisashi Takeuchi, Geschäftsführer der Mimaki Deutschland GmbH die Intention. Alle Mimaki Demo Days dauern zehn Arbeitstage und innerhalb dieser Zeit können die Interessenten ihren Besuch mit dem Mimaki-Team planen.

Dafür gibt es mehrere Anreize für die Besucher:

  • Mimaki Deutschland beherbergt in München und Hagen viele aktuelle Modelle. Auf Wunsch kann eine Demonstration mit mehreren Geräten und Tintentypen organisiert werden.
  • Große High-End Geräte wie JFX600-2513 oder Tiger600-1800TS, die normalerweise auf großen Messen zu besichtigen sind, stehen für eigene Testdrucke bereit.
  • Hinzu kommen in fast jedem Monat neue Produkte: Im April wird ein Teil der FESPA- Neuheiten wie der UCJV330-160 und das Kebab HS-System verfügbar sein. Weitere FESPA-Erscheinungen wie der JFX600-2531, CFX-2531 und TRAPIS (Transfer Pigment System) folgen im kommenden Quartal.
Weitere Informationen:
Mimaki Textildrucker Schneidsysteme
Quelle:

Mimaki Europe BV

Mimaki: Neues Textil-Transferdrucksystem für Pigmenttinte (c) Mimaki Europe
15.03.2024

Mimaki: Neues Textil-Transferdrucksystem für Pigmenttinte

Mimaki Europe hat die Markteinführung seines neuen Textil-Transferdrucksystems für Pigmenttinte, „TRAPIS", bekanntgegeben.

TRAPIS basiert auf einem einfachen zweistufigen Verfahren, das einen Tintenstrahldrucker und einen Kalander umfasst. Das gewünschte Design wird mit dem Tintenstrahldrucker mit einer speziell entwickelten Tinte auf Transferpapier gedruckt, welches dann über einen Kalander auf die Anwendung übertragen wird. Im Gegensatz zu herkömmlichen analogen und digitalen Farbdruckverfahren fällt bei TRAPIS fast kein Abwasser an, lediglich das für die automatische Wartung des Druckers benötigte Wasser. Da keine Vorbehandlung und kein Waschen des Gewebes erforderlich sind, können im Vergleich zum digitalen Druckverfahren mit Dye-Tinten etwa 14,5 Liter Wasser pro Quadratmeter eingespart werden

Mimaki Europe hat die Markteinführung seines neuen Textil-Transferdrucksystems für Pigmenttinte, „TRAPIS", bekanntgegeben.

TRAPIS basiert auf einem einfachen zweistufigen Verfahren, das einen Tintenstrahldrucker und einen Kalander umfasst. Das gewünschte Design wird mit dem Tintenstrahldrucker mit einer speziell entwickelten Tinte auf Transferpapier gedruckt, welches dann über einen Kalander auf die Anwendung übertragen wird. Im Gegensatz zu herkömmlichen analogen und digitalen Farbdruckverfahren fällt bei TRAPIS fast kein Abwasser an, lediglich das für die automatische Wartung des Druckers benötigte Wasser. Da keine Vorbehandlung und kein Waschen des Gewebes erforderlich sind, können im Vergleich zum digitalen Druckverfahren mit Dye-Tinten etwa 14,5 Liter Wasser pro Quadratmeter eingespart werden

TRAPIS bietet Druckdienstleistern eine benutzerfreundliche Option für den Textildruck. Da das Verfahren nur aus einem Druck- und einem Transfervorgang besteht, werden im Gegensatz zu den beim herkömmlichen Digital- und Analogdruck verwendeten sieben- oder achtstufigen Systemen keine Spezialfähigkeiten zur Bedienung benötigt. Das System hat kein Textilförderband, sodass keine zeitaufwändigen Wartungsarbeiten erforderlich sind.

Da TRAPIS in der Lage ist, mit nur einer Tinte eine Vielzahl unterschiedlicher Materialien einschließlich Naturfasern wie Baumwolle und Seide sowie Mischgewebe zu bedrucken, wird der Prozess noch weiter vereinfacht und lässt sich flexibel an die Anforderungen der Kunden anpassen, auch bei Kleinserien, bei denen mehrere Materialien zum Einsatz kommen. Die dazugehörige Tinte besitzt außerdem die Zertifizierung ZDHC MRSL Level 3 und trägt das bluesign® APPROVED-Siegel, das die Sicherheit von Arbeitnehmern und Verbrauchern sowie die Umweltfreundlichkeit des Produkts gewährleistet. Wie bei den bestehenden Textillösungen von Mimaki behalten die mit TRAPIS produzierten Drucke ihre Dehnbarkeit und Farbechtheit bei, ohne Aspekte wie Atmungsaktivität und Wasseraufnahmefähigkeit zu beeinträchtigen, die für Sektoren wie Heimtextilien, Activewear und Fashion besonders wichtig sind.

Weitere Informationen:
Mimaki Mimaki Europe Textildrucker
Quelle:

Mimaki Europe

11.03.2024

Zünd auf Texprocess 2024

Zünd präsentiert technologische Highlights für einen automatisierten und rationellen integrierten Textilzuschnitt auf der Texprocess 2024 in Frankfurt (23. bis 26. April).

Zu den Lösungen für den Textilzuschnitt gehört die Produktionssoftware MindCUT Studio Production, die in ihrer neusten Version mit neuen Funktionen überzeugt. Außerdem zeigt das Unternehmen sein neues Roll Handling System – RHS für den autonomen und unterbrechungsfreien Zuschnitt und präsentiert sein Schneidsystem Zünd G3 Cutter, das in der Grössenausführung L-2500 zu sehen sein.

Zünd präsentiert technologische Highlights für einen automatisierten und rationellen integrierten Textilzuschnitt auf der Texprocess 2024 in Frankfurt (23. bis 26. April).

Zu den Lösungen für den Textilzuschnitt gehört die Produktionssoftware MindCUT Studio Production, die in ihrer neusten Version mit neuen Funktionen überzeugt. Außerdem zeigt das Unternehmen sein neues Roll Handling System – RHS für den autonomen und unterbrechungsfreien Zuschnitt und präsentiert sein Schneidsystem Zünd G3 Cutter, das in der Grössenausführung L-2500 zu sehen sein.

Funktionen in MindCUT Studio
Auf der Texprocess stellt Zünd die sogenannte Feature Recognition vor. Mit dieser neuen Funktion erkennt die Software Motive sowie die verschiedenen Teile eines Kleidungsstücks mithilfe künstlicher Intelligenz und platziert diese für den Zuschnitt hochpräzise auf der Stoffbahn. Der Prozess ist schnell erledigt: Modell auswählen, Motiveigenschaften platzieren und die einzelnen Schnittteile zuweisen. Die Software erkennt deren Positionen und repetiert sie entlang der Stoffbahn. Unmittelbar danach kann der Zuschnitt gestartet werden. Die Motiverkennung mithilfe von KI automatisiert einen bislang manuellen Prozess und erlaubt eine hohe Wiederholgenauigkeit.
Neben der Motiverkennung bietet MindCUT auch eine Printed-Cut-Funktion, die Aufdrucke automatisiert erfasst oder Pattern Matching, das rapportierende Muster erkennt, Materialverzug kompensiert und die Marker automatisch mit der Textilmusterung abgleicht.

Roll Handling System – RHS
Das Rollenmagazin bietet Platz für bis zu zehn Textilrollen und kann auftragsabhängig mit unterschiedlichen oder materialidentischen Textiltypen ausgestattet werden. Mit dem grossen, vollautomatischen Rollenmagazin kann die unterbrechungsfreie Zuschnittzeit erhöht werden. Das Roll Handling System – RHS beschickt den Zünd Cutter komplett autonom mit Material. Das ermöglicht lange Produktionsfenster, in denen keine Bedieneingriffe mehr notwendig sind. Lediglich die Bestückung des Rollenmagazins erfolgt noch manuell. Dabei erfasst die Bedienerin die einzelnen Rollen mittels Barcode-Scan. Materialzuweisung und Steuerung des RHS erfolgen dann direkt über die MindCUT-Software.

Quelle:

Zünd Systemtechnik AG

06.03.2024

SHIMA SEIKI at FIMEC 2024 in Brazil

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

The company is showing its new SWG-XR® WHOLEGARMENT® knitting machine for the first time in Brazil. SWG-XR® features 4 needle beds and SHIMA SEIKI’s original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® products in all needles, and will be knitting WHOLEGARMENT® sportswear at FIMEC. For conventional shaped knitting, the compact SVR®093 machine with a short knitting width is specially developed for knitting shoe uppers, while the workhorse N.SSR®112 shaping machine features the latest garment knitting technology in an economical yet reliable package.
Both SVR®093 and N.SSR®112 will be knitting shoe uppers at FIMEC while utilizing the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. The classic SFG® seamless glove knitting machine will be knitting safety-oriented work gloves to round out SHIMA SEIKI’s multi-faceted display.

SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design
and simulation suited to shoe production.

Weitere Informationen:
Shima Seiki FIMEC shoes Brazil
Quelle:

SHIMA SEIKI MFG., LTD

26.02.2024

SHIMA SEIKI at Knit-Tech 2024

SHIMA SEIKI MFG., LTD. is exhibiting at the Knit-Tech 2024 Exhibition (1st-4th March 2024) in Tiruppur, India, in cooperation with its partner Universal MEP Projects & Engineering Services Ltd.

SHIMA SEIKI will be introducing the latest computerized flat knitting equipment to this market as proposals for sustainable production through innovative shaping technology and the latest digital solutions.

SHIMA SEIKI's lineup at Knit-Tech is headed by its workhorse N.SSR®112 garment shaping machine in 14 gauge. N.SSR®112 features innovations such as the R2CARRIAGE®, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. Shown for the first time is SHIMA SEIKI's new N.SSR®072 computerized jacquard collar machine that can produce shaped collars efficiently based on computer-generated designs.

SHIMA SEIKI MFG., LTD. is exhibiting at the Knit-Tech 2024 Exhibition (1st-4th March 2024) in Tiruppur, India, in cooperation with its partner Universal MEP Projects & Engineering Services Ltd.

SHIMA SEIKI will be introducing the latest computerized flat knitting equipment to this market as proposals for sustainable production through innovative shaping technology and the latest digital solutions.

SHIMA SEIKI's lineup at Knit-Tech is headed by its workhorse N.SSR®112 garment shaping machine in 14 gauge. N.SSR®112 features innovations such as the R2CARRIAGE®, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. Shown for the first time is SHIMA SEIKI's new N.SSR®072 computerized jacquard collar machine that can produce shaped collars efficiently based on computer-generated designs.

Design is demonstrated on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s "Total Fashion System" concept, it provides support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion.

Quelle:

SHIMA SEIKI MFG., LTD

Takao Terashima Foto Mimaki Europe
Takao Terashima
30.01.2024

Mimaki Europe: Neuer Managing Director

Mimaki Europe, Hersteller von Tintenstrahldruckern und Schneidetechnologien, hat die Ernennung von Takao Terashima zum neuen Managing Director bekanntgegeben.

Terashima begann seine Laufbahn bei Mimaki 1997 in der Forschungs- und Entwicklungsabteilung des Unternehmens. In den vergangenen 26 Jahren entwickelte er umfangreiche Fachkenntnisse in Bezug auf das Technologieportfolio von Mimaki und den zugehörigen Markt.

Mimaki Europe, Hersteller von Tintenstrahldruckern und Schneidetechnologien, hat die Ernennung von Takao Terashima zum neuen Managing Director bekanntgegeben.

Terashima begann seine Laufbahn bei Mimaki 1997 in der Forschungs- und Entwicklungsabteilung des Unternehmens. In den vergangenen 26 Jahren entwickelte er umfangreiche Fachkenntnisse in Bezug auf das Technologieportfolio von Mimaki und den zugehörigen Markt.

Während seiner Zeit bei Mimaki hatte er mehrere leitende Positionen im Unternehmen inne. Bevor er seine neue Rolle übernahm, war er Senior General Manager der Asia Oceania Business Unit, eine Position, die er 2017 antrat. Davor war er von April bis Oktober 2017 sechs Monate lang Senior Deputy General Manager of Quality Management.
 
Terashimas beruflicher Werdegang bei Mimaki führte ihn über den japanischen Hauptsitz hinaus in mehrere Niederlassungen des Unternehmens, wo er unterschiedliche Zuständigkeiten hatte. Zwischen 2013 und 2017 war er vier Jahre lang Managing Director von Mimaki Singapur. Zu Beginn seiner Karriere arbeitete er auch bei Mimaki USA im technischen Support.
 
Terashima, der Takahiro Hiraki als Managing Director von Mimaki Europe ablöst, wird umfangreiche Branchenkenntnisse, analytisches Denken, geschäftliche und teambildende Fähigkeiten sowie ein umfassendes Wissen über das Unternehmen in die neue Rolle einbringen.

Quelle:

Mimaki Europe

MACH2®XS Photo SHIMA SEIKI MFG., LTD.
MACH2®XS
28.01.2024

SHIMA SEIKI at Dhaka International Textile & Garment Machinery Exhibition 2024

Operating in Bangladesh since 1996, this is the fourteenth time the Japanese manufacturer is participating in DTG.

As the Bangladeshi textile industry calls for sustainable production through innovation and digitalization, the market is keen to establish effective business models that support such production. In response, for the first time in its DTG exhibition history, SHIMA SEIKI's lineup consists entirely of WHOLEGARMENT® knitting machines. Capable of knitting an entire garment in one piece without the need for linking or sewing while using only the material required to knit one garment at a time, WHOLEGARMENT® knitting is famous for promoting sustainability in the knit factory.

Operating in Bangladesh since 1996, this is the fourteenth time the Japanese manufacturer is participating in DTG.

As the Bangladeshi textile industry calls for sustainable production through innovation and digitalization, the market is keen to establish effective business models that support such production. In response, for the first time in its DTG exhibition history, SHIMA SEIKI's lineup consists entirely of WHOLEGARMENT® knitting machines. Capable of knitting an entire garment in one piece without the need for linking or sewing while using only the material required to knit one garment at a time, WHOLEGARMENT® knitting is famous for promoting sustainability in the knit factory.

The company is showing its MACH2®XS153 WHOLEGARMENT® knitting machine in 15L gauge, as well as its SWG®091N2 "Mini" WHOLEGARMENT® knitting machine in 15 gauge. MACH2®XS features 4 needle beds and SHIMA SEIKI's original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® knitwear in all needles. SWG®091N2 provides opportunities in WHOLEGARMENT® knitting across a wide range of items in a compact, economical package. A different approach to WHOLEGARMENT knitting is also shown in the form of the N.SVR®183 machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in fine gauge. Shown in 18 gauge at DTG, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

Demonstrations are performed on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s "Total Fashion System" concept, it provides comprehensive support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion.

Quelle:

SHIMA SEIKI MFG., LTD.

Santoni: Erfolgreiche Übernahme von Terrot (c) Santoni / Terrot
22.11.2023

Santoni: Erfolgreiche Übernahme von Terrot

Santoni Shanghai Knitting Machinery Co., Ltd. gab bekannt, dass die zuständigen Behörden die Genehmigung für die geplante Übernahme der Terrot GmbH, einem Rundstrickmaschinenhersteller in Deutschland, erteilt haben.

Die Akquisition ist ein entscheidender Schritt in der Strategie von Santoni, die Rundstrick-maschinenindustrie grundlegend zu revolutionieren. Zentrales Ziel ist dabei durch die Integration von Terrot in das Santoni-Ökosystem die Produktionskapazitäten zu erweitern, den Marktanteil zu steigern und in Verbindung mit weiteren strategischen Akquisitionen die Position von Santoni als Branchenmarktführer mit konkurrenzloser Größe, Innovationstiefe und Know-how zu stärken.

Santoni Shanghai Knitting Machinery Co., Ltd. gab bekannt, dass die zuständigen Behörden die Genehmigung für die geplante Übernahme der Terrot GmbH, einem Rundstrickmaschinenhersteller in Deutschland, erteilt haben.

Die Akquisition ist ein entscheidender Schritt in der Strategie von Santoni, die Rundstrick-maschinenindustrie grundlegend zu revolutionieren. Zentrales Ziel ist dabei durch die Integration von Terrot in das Santoni-Ökosystem die Produktionskapazitäten zu erweitern, den Marktanteil zu steigern und in Verbindung mit weiteren strategischen Akquisitionen die Position von Santoni als Branchenmarktführer mit konkurrenzloser Größe, Innovationstiefe und Know-how zu stärken.

Um der steigenden Nachfrage nach hochwertigen Rundstrickmaschinen gerecht zu werden, hat Santoni in den vergangenen Jahren eine Ökosystem-Strategie verfolgt, die darauf abzielt, die stark fragmentierte Branche zu vereinheitlichen und Innovation, Nachhaltigkeit und Digitalisierung zu fördern, um Marktbedürfnisse effektiver zu erfüllen. Der Einsatz neuster Innovationstechnologien beider Partner, Angebote zur Textilautomation, integrierte Unternehmensdienstleistungen, C2M-Lösungen und die Designplattform "Materialliance" versetzen Santoni Shanghai und Terrot in die Lage, Angebot und Nachfrage nach Rundstrickwaren zu verbinden und zu bündeln.

Durch die Integration des innovativen Produktangebots und der technischen Kompetenz von Terrot, insbesondere im Double-Jersey- und Jacquard-Bereich, kann sich Santoni einen Wettbewerbsvorteil verschaffen, indem hocheffiziente Maschinen angeboten werden.
Beispiel für das Potenzial der künftigen Kooperation bietet die UCC 572-T, eine Terrot Transfer-Jacquardmaschine für Sport- und Freizeitbekleidung.

Nach der Übernahme wird Terrot unter der Führung der beiden Geschäftsführer Robert W. Czajkowski und Dirk Lange weitergeführt. Santoni beabsichtigt, den Produktions- und Unternehmensstandort Terrot Chemnitz in Deutschland, einschließlich seiner Produkte, Dienstleistungen und Entwicklungskapazitäten beizubehalten und weiterzuentwickeln.

Weitere Informationen:
Santoni Terrot Rundstrickmaschinen
Quelle:

Terrot GmbH

18.10.2023

SHIMA SEIKI at A+A 2023

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the A+A 2023—Safety, Security and Health at Work International Trade Fair in Düsseldorf, Germany (24th-27th October 2023). On display will be the company's latest safety-related technology through its new SPG®-R pile glove knitting machine and the prototype SFG®-R next-generation glove knitting machine. Each of these machines drew attention at SHIMA SEIKI's booth at the International Textile Machinery (ITMA 2023) Exhibition in Milan.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the A+A 2023—Safety, Security and Health at Work International Trade Fair in Düsseldorf, Germany (24th-27th October 2023). On display will be the company's latest safety-related technology through its new SPG®-R pile glove knitting machine and the prototype SFG®-R next-generation glove knitting machine. Each of these machines drew attention at SHIMA SEIKI's booth at the International Textile Machinery (ITMA 2023) Exhibition in Milan.

SHIMA SEIKI's original SPG®, developed in 1979 as the world’s first automatic glove knitting machine to produce seamless pile-knitted gloves, is now reborn as a next-generation model. Pile gloves feature special traits that include cushioning, shock-reduction and thermal insulation and cold protection, making them popular especially in the field of industrial safety. Now, SPG® is redesigned from the ground up and re-introduced as the SPG®-R. The new SPG®-R features a new moveable sinker system with selectable loop presser function. Combined with a new belt-driven carriage it allows SPG® to provide efficient and reliable production of fashionable, high-quality pile gloves. Shown in 7 gauge at A+A, SPG®-R surpasses the previous generation with pioneering technology, improved capability and reliable productivity.

SHIMA SEIKI's original product on which the company was founded was the fully automated seamless glove knitting machine. While the original model evolved to become the current SFG® series, SFG®-R exhibited at A+A is its spiritual successor. With a new sinker system, a belt-driven 2-cam carriage and auto yarn carriers SFG®-R is a completely new machine for knitting gloves that conform better to the shape of the hand for improved fit. Furthermore its greater design potential offers users the opportunity to break out of the work glove market and into the fashion market. SFG®-R is shown as a prototype next-generation model in 12 gauge at A+A.

Also demonstrated will be SHIMA SEIKI's APEXFiz® design software. The importance of design software is made even more significant by the new patterning capabilities of SPG®-R and SFG®-R. Both machines now feature increased design potential that allow each of their products—pile gloves and work gloves, respectively—to expand their market into fashion. APEXFiz® is available for developing these designs. Furthermore virtual sampling on APEXFiz® is especially effective in streamlining the production process. Ultra-realistic simulation capability allows the use of virtual samples for evaluating design variations without producing actual samples for each variation, thereby minimizing the time, cost and resources normally required with sample-making, supporting smart, speedy and sustainable production.

Weitere Informationen:
Shima Seiki A+A flat knitting technology
Quelle:

SHIMA SEIKI MFG., LTD.

NOPINZ now runs the majority of their production out of its microfactory based in Devon, UK. Photo NOPINZ
NOPINZ now runs the majority of their production out of its microfactory based in Devon, UK.
28.09.2023

NOPINZ using Mimaki’s textile dye sublimation solutions

Founded in 2013, NOPINZ is a UK-based manufacturer of clothing for cyclists and triathletes. The company's first product was the ‘SpeedPocket’, a product that allows competitors to attach their race numbers more easily (and with ‘no pins’) while improving the all-important aerodynamics. Soon recognising the customer demand for premade attire with incorporated number pockets, the company embarked on a mission to manufacture these new product lines itself. Today, NOPINZ boasts a diverse portfolio, with 60% of its products made in-house, catering to a growing customer base across the UK and international markets. NOPINZ creates speed suits for some of the world’s top cycling teams, as well as competitive amateurs.

Founded in 2013, NOPINZ is a UK-based manufacturer of clothing for cyclists and triathletes. The company's first product was the ‘SpeedPocket’, a product that allows competitors to attach their race numbers more easily (and with ‘no pins’) while improving the all-important aerodynamics. Soon recognising the customer demand for premade attire with incorporated number pockets, the company embarked on a mission to manufacture these new product lines itself. Today, NOPINZ boasts a diverse portfolio, with 60% of its products made in-house, catering to a growing customer base across the UK and international markets. NOPINZ creates speed suits for some of the world’s top cycling teams, as well as competitive amateurs.

NOPINZ places a strong emphasis on sustainability and is committed to minimising its environmental impact. Using a microfactory approach gives better oversight and control of the manufacturing process, including sourcing materials sustainably and locally where possible, reducing transportation, and improving access to recycling. “Our ‘zero to landfill’ policy, means that we reduce our wastage where possible and either recycle or donate excess product to charity,” Blake adds. “We hope to become a B-Corp company in the future.”

“We tested out a few printers, before we ultimately settled on Mimaki,” Blake Pond, the founder of NOPINZ explained. Now the company’s line-up entirely consists of Mimaki’s textile dye sublimation solutions.
“During our search we prioritised the ability to produce fluorescence and accurately replicate colours. Customers often come to us with existing kit made by other manufacturers, which they want to match, so accurately replicating colour is extremely important. And even without existing kit, customers occasionally ask for specific pantone colours. When it comes to cycling kit, colour is often pivotal when considering where to buy from.”

As two flagship dye sublimation printers, both the TS300P-1800 and TS55-1800 are equipped to print on the various technical fabrics that are needed for cycling attire and faithfully reproduce colours to meet customer expectations.

Quelle:

Mimaki EMEA

Mimaki führt schnelleren DTF-Drucker ein (c) Mimaki
30.08.2023

Mimaki führt schnelleren DTF-Drucker ein

Mimaki Europe, ein Anbieter von industriellen Tintenstrahldruckern, Schneideplottern und 3D-Druckern, hat seinen neuen „Direct-to-Film“ (DTF)-Drucker, den TxF300-75, eingeführt.

Der neue TxF300-75 erfüllt dieselben Zielvorgaben wie das Vorgängermodell und deckt die unterschiedlichsten Druckanforderungen ab, nicht zuletzt die Bedürfnisse von Großunternehmen, die qualitativ hochwertige Ergebnisse bei hoher Produktivität benötigen.

Die Zuverlässigkeit der DTF-Druckerserie von Mimaki ist dem integrierten Tintenzirkulationssystem zu verdanken, das das Verstopfen der Düsen für Weißtinte verhindert, sowie dem Entgasungsmodul, das das Risiko eines schlechten Tintenausstoßes erheblich verringert. Der neue Drucker ist mit den Kernfunktionen von Mimaki ausgestattet, zu denen die NCU (Nozzle Check Unit) und das NRS (Nozzle Recovery System) gehören, die eine zuverlässige, unterbrechungsfreie Druckproduktion gewährleisten. Das DTF-Verfahren gibt Kunden auch die Möglichkeit, eine größere Auswahl an Stoffen zu bedrucken, z. B. Baumwolle, Mischgewebe, Polyester und dunkel gefärbte Stoffe.

Mimaki Europe, ein Anbieter von industriellen Tintenstrahldruckern, Schneideplottern und 3D-Druckern, hat seinen neuen „Direct-to-Film“ (DTF)-Drucker, den TxF300-75, eingeführt.

Der neue TxF300-75 erfüllt dieselben Zielvorgaben wie das Vorgängermodell und deckt die unterschiedlichsten Druckanforderungen ab, nicht zuletzt die Bedürfnisse von Großunternehmen, die qualitativ hochwertige Ergebnisse bei hoher Produktivität benötigen.

Die Zuverlässigkeit der DTF-Druckerserie von Mimaki ist dem integrierten Tintenzirkulationssystem zu verdanken, das das Verstopfen der Düsen für Weißtinte verhindert, sowie dem Entgasungsmodul, das das Risiko eines schlechten Tintenausstoßes erheblich verringert. Der neue Drucker ist mit den Kernfunktionen von Mimaki ausgestattet, zu denen die NCU (Nozzle Check Unit) und das NRS (Nozzle Recovery System) gehören, die eine zuverlässige, unterbrechungsfreie Druckproduktion gewährleisten. Das DTF-Verfahren gibt Kunden auch die Möglichkeit, eine größere Auswahl an Stoffen zu bedrucken, z. B. Baumwolle, Mischgewebe, Polyester und dunkel gefärbte Stoffe.

In Übereinstimmung mit den Nachhaltigkeitszielen von Mimaki verwendet der TxF300-75 die PHT50-Pigmenttinten von Mimaki, die den ECO-PASSPORT erhalten haben. Diese Auszeichnung bestätigt, dass sie umweltverträglich sind und die Anforderungen der OEKO-TEX-Zertifizierung erfüllen.

Mimaki kündigte auf der FESPA 2023 auch seine Partnerschaft mit Adkins, einem Hersteller von Wärmeübertragungstechnologie, an. Adkins hat die Inline 800 DTF Powder Shaker Cure Unit entwickelt, eine Finishing-Lösung, die in Größe und Qualität den DTF-Systemen von Mimaki entspricht. Da das Gerät auch mit dem neuen TxF300-75 kompatibel ist, erhalten Kunden, die sich für eines der beiden DTF-Modelle von Mimaki entscheiden, eine Komplettlösung.

Quelle:

Mimaki Europe BV

SHIMA SEIKI at Preview in SEOUL (c) SHIMA SEIKI MFG., LTD.
18.08.2023

SHIMA SEIKI at Preview in SEOUL

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Korean subsidiary SHIMA SEIKI KOREA INC., will participate in the Preview in SEOUL exhibition in Seoul, Republic of Korea this month (23rd - 25th of August 2023).

SHIMA SEIKI will show its SWG061N2 compact WHOLEGARMENT® knitting machine which can produce a wide range of WHOLEGARMENT® items in their entirety without the need for linking or sewing. The SWG-N2 series “Mini” range is suited to the production of small knit items and accessories such as gloves, socks, hats and scarves as well as cozies, shoe uppers, bags, card cases, glasses cases, smartphone covers and other personal items. The N.SVR093SP is a conventional shaped knitting machine featuring a loop presser bed that yields novel fabrics with special inlay patterns that are produced by inserting yarn into knit fabric in a weave fashion, offering new and exciting possibilities in hybrid knit-weave textiles. Both machines will be shown knitting such items as bags and sporting goods to demonstrate the capability of current knitting technology for producing non-apparel items.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Korean subsidiary SHIMA SEIKI KOREA INC., will participate in the Preview in SEOUL exhibition in Seoul, Republic of Korea this month (23rd - 25th of August 2023).

SHIMA SEIKI will show its SWG061N2 compact WHOLEGARMENT® knitting machine which can produce a wide range of WHOLEGARMENT® items in their entirety without the need for linking or sewing. The SWG-N2 series “Mini” range is suited to the production of small knit items and accessories such as gloves, socks, hats and scarves as well as cozies, shoe uppers, bags, card cases, glasses cases, smartphone covers and other personal items. The N.SVR093SP is a conventional shaped knitting machine featuring a loop presser bed that yields novel fabrics with special inlay patterns that are produced by inserting yarn into knit fabric in a weave fashion, offering new and exciting possibilities in hybrid knit-weave textiles. Both machines will be shown knitting such items as bags and sporting goods to demonstrate the capability of current knitting technology for producing non-apparel items.

SDS®-ONE APEX design system and APEXFiz® subscription-based design software will also be on display. Both support the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. Virtual samples can furthermore be used in e-commerce to gauge consumer demand before production begins. Feeding that information back to production and combined with on-demand WHOLEGARMENT® knitting technology, production can be adjusted to optimize inventory and minimize leftover waste. APEXFiz® thereby helps to realize sustainability and digitally transform the fashion supply chain.

Quelle:

SHIMA SEIKI MFG., LTD.

(c) SHIMA SEIKI MFG., LTD.
26.07.2023

SHIMA SEIKI launches SHIMA HelpCenter

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan has launched its “SHIMA HelpCenter” customer support site. SHIMA HelpCenter integrates Help, FAQ, Operation Manual, and Glossary functions for SHIMA SEIKI products, and supports cross-content keyword search to improve user convenience. In addition, video content provides easy-to-understand explanations of various product functions, as smart solutions to questions and problems that may arise during product use. With support for smartphones and tablets, our product users can use the service anytime, anywhere. Operation manuals that were previously provided in printed form are being converted to the online version in order to provide services more efficiently in an environmentally friendly, sustainable, and convenient manner.

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan has launched its “SHIMA HelpCenter” customer support site. SHIMA HelpCenter integrates Help, FAQ, Operation Manual, and Glossary functions for SHIMA SEIKI products, and supports cross-content keyword search to improve user convenience. In addition, video content provides easy-to-understand explanations of various product functions, as smart solutions to questions and problems that may arise during product use. With support for smartphones and tablets, our product users can use the service anytime, anywhere. Operation manuals that were previously provided in printed form are being converted to the online version in order to provide services more efficiently in an environmentally friendly, sustainable, and convenient manner.

SHIMA online is a web service platform which features “APEXFiz®” design software subscription service, “yarnbank®” digital yarn sourcing service, “SHIMA Datamall™” digital content service, “SHIMANAVI®” e-learning system and “SHIMA KnitManager™” knit production management software, all of which are designed to improve operational efficiency and create attractive and sustainable products. With a SHIMA online account, both SHIMA HelpCenter and SHIMA Datamall can be accessed using the same ID.

Quelle:

SHIMA SEIKI MFG., LTD.

21.07.2023

Digital Textile Printing: Direct-to-Film Technology

In the printing industry, direct-to-film technology is having a transformative impact on the apparel decoration space. It provides a simple and affordable garment printing process that facilitates vibrant, dynamic, full-colour designs with a durable print. It opens up opportunities for digital print service providers (PSPs) to expand their product offerings in the textile industry, their network of potential customers and expand the range of fabrics they can print on.

In the printing industry, direct-to-film technology is having a transformative impact on the apparel decoration space. It provides a simple and affordable garment printing process that facilitates vibrant, dynamic, full-colour designs with a durable print. It opens up opportunities for digital print service providers (PSPs) to expand their product offerings in the textile industry, their network of potential customers and expand the range of fabrics they can print on.

Direct-to-film vs. Screen Printing
Direct-to-film printing is the process of digitally printing directly onto a special transfer film sheet. The printed film is subsequently sprinkled with a hot-melt powder and heated. Once the transfer sheet is cured and dried, it can be heat-pressed onto a variety of fabrics to create premium transferred designs for customised merchandising, sportswear, and an array of other promotional applications for the textile market. Compared with traditional screen printing, the plate creation required for that process is far too time-consuming. Not only this, but it does not match direct-to-film’s ability to produce vivid colours and quality details such as shapes, lettering, and motifs often sought after in the promotional and merchandising space for bespoke textiles.

The Mimaki TxF150-75
Mimaki’s first direct-to-film inkjet printer is the TxF150-75, a fitting extension to the 150 series, with a maximum printing width of 80cm. Offering a stable printing plotter, the model’s built-in ink circulation system and degassed ink pack are resolutions to common direct-to-film challenges such as poor ink ejection and white ink clogging. The new printer also includes core Mimaki features including NCU (Nozzle Check Unit) and NRS (Nozzle Recovery System) for stable, uninterrupted print production. Operating in harmony with the textile printer itself is Mimaki’s ECO PASSPORT by OEKO-TEX® certified water-based pigment textile inks, formulated especially for the TxF150-75. Coupled with Mimaki’s RasterLink7 RIP software, users are offered end-to-end oversight and efficiency from creative design to final product.

In addition, and in line with Mimaki’s collaborative approach to meeting customer needs, Adkins has developed an 80cm wide powder shaker cure unit to complete this ‘A brand’ direct-to-film printing solution. By offering the printer and post-processing unit at 80cm wide, customers can print larger garments with less waste and quicker production times, making the process much more cost effective.

Quelle:

Mimaki Europe B.V.

12.07.2023

SHIMA SEIKI to exhibit at Tech Fashion shows in Brazil

SHIMA SEIKI MFG., LTD., together with its Brazilian representative BRASTEMA TECNOLOGIA TÊXTIL LTDA., will host the Tech Fashion shows, a series of private exhibitions held at two locations in Brazil in July and August. The exhibitions will be a showcase for the company’s latest computerized flat knitting technology, presented through fashion shows, machine exhibits and the latest knit samples featured at ITMA 2023. The event is organized by the Fashion Committee of Fitemavest, consultants to Brazil's fashion market, and will feature presentations by CS DESIGN STUDIO designer Cecilia Seibel.

Technological displays include a full lineup of SHIMA SEIKI flat knitting machines, ranging from the MACH2XS WHOLEGARMENT® knitting machine to N.SVR122 computerized shaping machine, as well as the SFG-I fully automated glove knitting machine. Exhibited machines vary between locations. Details are given below under ‘Exhibited Technology.’

SHIMA SEIKI MFG., LTD., together with its Brazilian representative BRASTEMA TECNOLOGIA TÊXTIL LTDA., will host the Tech Fashion shows, a series of private exhibitions held at two locations in Brazil in July and August. The exhibitions will be a showcase for the company’s latest computerized flat knitting technology, presented through fashion shows, machine exhibits and the latest knit samples featured at ITMA 2023. The event is organized by the Fashion Committee of Fitemavest, consultants to Brazil's fashion market, and will feature presentations by CS DESIGN STUDIO designer Cecilia Seibel.

Technological displays include a full lineup of SHIMA SEIKI flat knitting machines, ranging from the MACH2XS WHOLEGARMENT® knitting machine to N.SVR122 computerized shaping machine, as well as the SFG-I fully automated glove knitting machine. Exhibited machines vary between locations. Details are given below under ‘Exhibited Technology.’

The potential of each of these knitting machines are maximized in combination with the SDS®-ONE APEX4 3D design system and APEXFiz® design software. At the core of the company’s "Total Fashion System" concept, SDS®-ONE APEX4 and APEXFiz® provide comprehensive support throughout the apparel supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design to production and even sales promotion. Especially effective is their capability to improve on the design and evaluation process with virtual sampling. Ultra-realistic simulation capability on SDS®-ONE APEX4 and APEXFiz® allows virtual sampling to minimize the amount of time, cost and material spent during the sample-making process

The fashion show will feature the newest creations in WHOLEGARMENT® and other knitwear.

Weitere Informationen:
Shima Seiki flat knitting technology
Quelle:

SHIMA SEIKI MFG., LTD.

19.06.2023

SHIMA SEIKI to exhibit at Pitti Filati

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 93rd edition of the Pitti Immagine Filati exhibition in Florence, Italy. It will exhibit as part of the new CustomEasy section, which explores the various aspects of customization in the presence of textile machinery, including a multi-faceted lineup of SHIMA SEIKI WHOLEGARMENT® knitting machines.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 93rd edition of the Pitti Immagine Filati exhibition in Florence, Italy. It will exhibit as part of the new CustomEasy section, which explores the various aspects of customization in the presence of textile machinery, including a multi-faceted lineup of SHIMA SEIKI WHOLEGARMENT® knitting machines.

The WHOLEGARMENT® knitting machine SWG-XR® features 4 needle beds for all-needle knitting of high quality WHOLEGARMENT® products using the company's original SlideNeedle™. SWG-XR® features a re-designed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity of more than 25% over the previous MACH2®XS machine, as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit with the MACH2® series, including punch-lace patterns, variable stitch knitting and intarsia knitting. Setting new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting, SWG-XR® at Pitti Filati will be shown in 18L.

Affectionately referred to as “SWG®-Mini,” SHIMA SEIKI's compact line of WHOLEGARMENT® machines allows customers to take advantage of the same short lead times and versatile production as larger WHOLEGARMENT® knitting machines, but with minimal investment. SWG®091N2 with its 36-inch (90cm) knitting width is especially suited to knitting a wide variety of items including accessory items as well as childrenswear and smaller size garments, all without the need for linking or sewing afterward. At Pitti Filati SWG®091N2 will be shown in 5 gauge.

A new proposal in WHOLEGARMENT® knitting will also be shown in the form of the N.SVR®183 WHOLEGARMENT® knitting machine. SHIMA SEIKI's global standard in shaped knitting, the N.SVR® series now features a model for producing WHOLEGARMENT® knitwear using every other needle in fine gauge. N.SVR®183 is equipped with the R2CARRIAGE® system and a compact, lightweight carriage for even higher productivity. Shown in 21G at Pitti Filati 93, N.SVR®183 is the ideal machine for flexible, entry-level WHOLEGARMENT® production, with the versatility to respond to fluctuating market demand.

APEXFiz® subscription-based design software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes. By replacing physical samples, virtual samples reduce time, cost and material that otherwise go to waste. APEXFiz® thereby helps to realize sustainability and digitally transform the fashion supply chain.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio, as well as samples from SHIMA SEIKI headquarters for assessing the potential of SHIMA SEIKI knitting machines.

Quelle:

SHIMA SEIKI MFG., LTD.

(c) Mimaki
09.06.2023

Mimaki launches Tiger600-1800TS Dye Sublimation Printer

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, is debuting the new Tiger600-1800TS, Mimaki’s most productive sublimation transfer printer, on its stand at ITMA 2023. This latest high-speed, compact and robust roll-to-roll inkjet printer has been designed to accelerate the analogue to digital transformation within the textile printing industry.

The Tiger600-1800TS boasts a maximum printing speed of 550 m2/h (143% faster than the previous model) owing to the renovated high-speed printhead and Mimaki’s proprietary image quality enhancement technologies. The printer’s size has also been halved compared to the previous system, with the paper mounting and winding system both located at the back of the machine. This smaller footprint enables customers to easily install multiple units to meet fluctuating demand, whilst also increasing overall production capacity.

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, is debuting the new Tiger600-1800TS, Mimaki’s most productive sublimation transfer printer, on its stand at ITMA 2023. This latest high-speed, compact and robust roll-to-roll inkjet printer has been designed to accelerate the analogue to digital transformation within the textile printing industry.

The Tiger600-1800TS boasts a maximum printing speed of 550 m2/h (143% faster than the previous model) owing to the renovated high-speed printhead and Mimaki’s proprietary image quality enhancement technologies. The printer’s size has also been halved compared to the previous system, with the paper mounting and winding system both located at the back of the machine. This smaller footprint enables customers to easily install multiple units to meet fluctuating demand, whilst also increasing overall production capacity.

A further environmental benefit of the Tiger600-1800TS will be the bluesign® certification of its MLSb510 series sublimation transfer inks. This certificate, expected to be awarded in June 2023, will provide assurance that these inks are of highest quality combined with due consideration for the safety of consumers and print operators, and environmental conservation, and therefore, contributing to the sustainability of the textile industry.

Mimaki’s expertise in developing reliable, easy-to-use and efficient solutions has also not faltered in the development of the Tiger600-1800TS. The printer’s ink tanks can be replaced without interrupting the printing process, minimising down time. Maintenance of the printer is also reduced with its roller paper feeding method eliminating the need for the application of adhesives onto a belt.

Quelle:

Mimaki Europe

07.06.2023

Mimaki at ITMA 2023

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Texcol® is a transfer paper pioneered by Dutch paper manufacturer, Coldenhove that allows for transferring a digital print using an environmentally friendly 3-step transfer process to create a vibrant application on a wide range of materials, including natural fibres. The design is initially printed onto the paper using a customised TS330-1600 - Mimaki’s high-volume, high-quality dye sublimation printer - and Mimaki’s new pigment inks developed for the process. The module that adapts the TS330-1600 will be available as an option for existing and new Mimaki customers in Q3 2023 but is being previewed on the Mimaki stand at ITMA.

Mimaki’s new Textile Pigment Ink is undergoing bluesign certification before commercial availability. bluesign is a renowned certification programme that ensures the highest levels of safety, environmental friendliness, and sustainability within the textile and apparel industry.

As the final stage, the Texcol® paper undergoes a one-step waterless process, through an entry-level calendar machine onto the textile of choice.

Cyclical textile technology
Mimaki is also debuting its new, unique Neo-Chromato Process, which revolutionises the reuse of coloured polyester textiles.

By decolourising polyester textiles that have been dyed using dye sublimation technologies, this innovative process allows materials to be re-printed or dyed immediately, contributing to a smaller circular economy. There is no limit to how many times reused polyester can be treated with the Neo-Chromato Process and the process itself minimises water usage and pollution by enabling the disposal of the absorbent paper and decolouring solvents used in the process as burnable waste.

Quelle:

Mimaki Europe B.V.

(c) SHIMA SEIKI MFG., LTD.
24.05.2023

SHIMA SEIKI at ITMA 2023

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will be participating in the International Textile Machinery Association exhibition (ITMA 2023) in Milan, Italy this June.

The Next-Generation group of machines is represented by the letter ‘R,’ first used in the SWG-XR WHOLEGARMENT® knitting machine launched last year in time for SHIMA SEIKI's 60th Anniversary event. The SWG-XR name is based on the original SWG-X four-needlebed WHOLEGARMENT® knitting machine which debuted at the Milan ITMA in 1995. As ITMA returns to Milan, SWG-XR refers to its origin as a pioneering invention that launched a new genre of seam-free knits produced in one entire piece. At the same time it represents a renewal of SHIMA SEIKI's commitment to its customers, the industry and the environment, as all aspects of the machine were re-evaluated in terms of its purpose, the way it is manufactured, how it is used and how it impacts the environment. The same renewal has been applied to the rest of the company's product lineup, and it is this renewal that becomes the core of SHIMA SEIKI's exhibition concept for ITMA 2023: "Reborn."

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will be participating in the International Textile Machinery Association exhibition (ITMA 2023) in Milan, Italy this June.

The Next-Generation group of machines is represented by the letter ‘R,’ first used in the SWG-XR WHOLEGARMENT® knitting machine launched last year in time for SHIMA SEIKI's 60th Anniversary event. The SWG-XR name is based on the original SWG-X four-needlebed WHOLEGARMENT® knitting machine which debuted at the Milan ITMA in 1995. As ITMA returns to Milan, SWG-XR refers to its origin as a pioneering invention that launched a new genre of seam-free knits produced in one entire piece. At the same time it represents a renewal of SHIMA SEIKI's commitment to its customers, the industry and the environment, as all aspects of the machine were re-evaluated in terms of its purpose, the way it is manufactured, how it is used and how it impacts the environment. The same renewal has been applied to the rest of the company's product lineup, and it is this renewal that becomes the core of SHIMA SEIKI's exhibition concept for ITMA 2023: "Reborn."

Of the 9 knitting machines SHIMA SEIKI is exhibiting, 8 machines will be part of the Next-Generation lineup, ranging from WHOLEGARMENT® knitting machines and computerized flat knitting machines to glove knitting machines. More than 300 items will be on display as proposals for knitted applications in various fields ranging from fashion, sports, shoes, bags and accessories to medical, safety, automotive, aeronautical and other wearable and industrial textile applications.

In addition to machine technology, SHIMA SEIKI's SDS-ONE APEX series computer graphic design system and software will be shown with their latest software upgrades that feature significant improvements in knit programming, 3D functions and speed. Demonstrations will be available for a comprehensive fashion tech solutions package based on realistic virtual sampling and supported by various digital solutions and web services.

Weitere Informationen:
Shima Seiki ITMA 2023 ITMA
Quelle:

SHIMA SEIKI MFG., LTD.

12.05.2023

Mimaki auf der ITMA 2023

Mimaki Europe wird auf der ITMA 2023 (8.-14. Juni 2023 Fiera Milano RHO, Mailand, Italien) seine auf Nachhaltigkeit und Kreislaufwirtschaft ausgerichteten Lösungen vorstellen. Neben der Präsentation neuer Drucker wird Mimaki auf der Messe auch seine internationalen Kooperationen im Designbereich hervorheben.

Nachhaltigkeit und Kreislaufwirtschaft sind heute für alle Unternehmen von entscheidender Bedeutung. Im Rahmen der Sustainable Development Goals (SDGs) der Vereinten Nationen wird Mimaki auf der ITMA 2023 vollständig wasserlose digitale Lösungen für den Textildruck vorstellen, darunter Direct-to-Film- und Sublimationsdrucker.

Auf der Messe wird Mimaki seine neueste Lösung für das Segment der veredelten Bekleidung, den vor kurzem angekündigten Direct-to-Film (DTF) Inkjet-Drucker TxF150-75 vorstellen. Der Drucker, der ein auf Hitze basiertes Transferverfahren verwendet, eignet sich zur Herstellung hochwertiger, individualisierter Merchandising-Artikel, (Sport)bekleidung und anderer textiler Werbeträger.

Mimaki Europe wird auf der ITMA 2023 (8.-14. Juni 2023 Fiera Milano RHO, Mailand, Italien) seine auf Nachhaltigkeit und Kreislaufwirtschaft ausgerichteten Lösungen vorstellen. Neben der Präsentation neuer Drucker wird Mimaki auf der Messe auch seine internationalen Kooperationen im Designbereich hervorheben.

Nachhaltigkeit und Kreislaufwirtschaft sind heute für alle Unternehmen von entscheidender Bedeutung. Im Rahmen der Sustainable Development Goals (SDGs) der Vereinten Nationen wird Mimaki auf der ITMA 2023 vollständig wasserlose digitale Lösungen für den Textildruck vorstellen, darunter Direct-to-Film- und Sublimationsdrucker.

Auf der Messe wird Mimaki seine neueste Lösung für das Segment der veredelten Bekleidung, den vor kurzem angekündigten Direct-to-Film (DTF) Inkjet-Drucker TxF150-75 vorstellen. Der Drucker, der ein auf Hitze basiertes Transferverfahren verwendet, eignet sich zur Herstellung hochwertiger, individualisierter Merchandising-Artikel, (Sport)bekleidung und anderer textiler Werbeträger.

Anwender, die ihren Textildruck ausweiten möchten, können am Stand von Mimaki den volumenstarken Sublimationsdrucker TS330-1600 erleben. TS330-1600, der mit einer 10kg-Tintenversorgungseinheit und einem verbesserten Einzugsmechanismus ausgestattet ist, hat eine maximale Druckgeschwindigkeit von 135m2 /h und kann mit fluoreszierenden Tinten drucken, sodass sich Benutzer jetzt noch mehr Anwendungen erschließen können.

Auf der ITMA 2023 werden mehrere neue Modelle, darunter ein neuer Textildrucker, zu sehen sein, die auf dem bestehenden, branchenführenden Portfolio des Unternehmens und den Nachhaltigkeitsanforderungen des Sektors aufbauen. Die Textildrucker von Mimaki zeichnen sich durch eine hohe Druckleistung aus und basieren auf fortschrittlicher Technologie.

Am Stand des Unternehmens werden Kooperationen mit Designern aus aller Welt, darunter aus den USA, Australien und Italien, zu sehen sein, die Mimakis nachhaltige Drucklösungen eingesetzt haben. Als Teil der Zukunftsvision des Unternehmens arbeitet Mimaki mit solchen Künstlern zusammen, um sich neue Perspektiven zu erschließen und nah am Puls der Märkte und ihrer Bedürfnisse zu bleiben.

 

Quelle:

Mimaki Europe B.V.