Aus der Branche

Zurücksetzen
10 Ergebnisse
03.11.2022

SGL Carbon: Positive Geschäftsentwicklung in allen Geschäftsbereichen

  • Positive Geschäftsentwicklung in allen vier Geschäftsbereichen
  • Umsatzanstieg um 14,8 % auf 853,9 Mio. €
  • Bereinigtes EBITDA verbessert sich um 25,4 % auf 136,1 Mio. €
  • Erfolgreiche Refinanzierung der Wandelschuldverschreibung von 2018

Nach 270,9 Mio. € im 1. Quartal 2022 und 278,9 Mio. € im 2. Quartal erhöhte die SGL Carbon den Konzernumsatz im 3. Quartal 2022 auf 304,1 Mio. €. Nach neun Monaten entspricht dies einem deutlichen Umsatzwachstum von 14,8 % auf insgesamt 853,9 Mio. € (9M 2021: 743,5 Mio. €). Die erfreuliche Geschäftsentwicklung spiegelt sich auch im bereinigten EBITDA der Gesellschaft wider, das sich im Vergleich zum Vorjahreszeitraum um 25,4 % auf 136,1 Mio. € verbesserte (9M 2021: 108,5 Mio. €). Zum operativen Erfolg haben alle vier Geschäftsbereiche beigetragen.

Ausblick
Aufgrund der positiven Geschäftsentwicklung hat das Management die Prognose für das Gesamtjahr am 6. September 2022 erhöht. Für das Geschäftsjahr 2022 wird ein Konzernumsatz von ca. 1,2 Mrd. € (zuvor: ca. 1,1 Mrd. €) und ein bereinigtes EBITDA von 170 bis 190 Mio. € (zuvor: 130 bis 150 Mio. €) erwartet.

  • Positive Geschäftsentwicklung in allen vier Geschäftsbereichen
  • Umsatzanstieg um 14,8 % auf 853,9 Mio. €
  • Bereinigtes EBITDA verbessert sich um 25,4 % auf 136,1 Mio. €
  • Erfolgreiche Refinanzierung der Wandelschuldverschreibung von 2018

Nach 270,9 Mio. € im 1. Quartal 2022 und 278,9 Mio. € im 2. Quartal erhöhte die SGL Carbon den Konzernumsatz im 3. Quartal 2022 auf 304,1 Mio. €. Nach neun Monaten entspricht dies einem deutlichen Umsatzwachstum von 14,8 % auf insgesamt 853,9 Mio. € (9M 2021: 743,5 Mio. €). Die erfreuliche Geschäftsentwicklung spiegelt sich auch im bereinigten EBITDA der Gesellschaft wider, das sich im Vergleich zum Vorjahreszeitraum um 25,4 % auf 136,1 Mio. € verbesserte (9M 2021: 108,5 Mio. €). Zum operativen Erfolg haben alle vier Geschäftsbereiche beigetragen.

Ausblick
Aufgrund der positiven Geschäftsentwicklung hat das Management die Prognose für das Gesamtjahr am 6. September 2022 erhöht. Für das Geschäftsjahr 2022 wird ein Konzernumsatz von ca. 1,2 Mrd. € (zuvor: ca. 1,1 Mrd. €) und ein bereinigtes EBITDA von 170 bis 190 Mio. € (zuvor: 130 bis 150 Mio. €) erwartet.

Folglich wird ein bereinigtes EBIT von 110 bis 130 Mio. € (zuvor: 70 bis 90 Mio. €) prognostiziert. Die Erwartungen zur Kapitalrendite (ROCE) von ursprünglich 7 % bis 9 % werden entsprechend der Ergebnisentwicklung auf 10 % bis 12 % angehoben. Die Einschätzung zum Free Cashflow (deutliche Unterschreitung des Vorjahresniveaus von 111,5 Mio. €) bleibt unverändert.

Quelle:

SGL CARBON SE

(c) AkzoNobel
12.07.2022

AkzoNobel announces €20 million investment and creates new jobs in France

A €20 million investment has been announced by AkzoNobel to increase and improve production at two of its sites in France. Around 30 new jobs will be created.

A total of €15 million will be spent on the company’s aerospace coatings facility in Pamiers, which was taken over following the Mapaero acquisition in 2019. Production capacity is being boosted by 50%, while the funds will also be used to reduce environmental impact and improve safety processes and working conditions.

The other €5 million will be spent on improving production flexibility at the decorative paints site in Montataire, which is one of the company’s most important manufacturing locations for wall paints in Europe.

The plans for Pamiers include the construction of two extensions, one for storage and one for cleaning and waste treatment. The project will also enable the company to relocate the production of exterior polyurethane paints for aircraft widely used in Europe from its Waukegan plant in the US.

Building work is expected to start by the end of 2023, with the new installations at both locations due to be operational in early 2025.

A €20 million investment has been announced by AkzoNobel to increase and improve production at two of its sites in France. Around 30 new jobs will be created.

A total of €15 million will be spent on the company’s aerospace coatings facility in Pamiers, which was taken over following the Mapaero acquisition in 2019. Production capacity is being boosted by 50%, while the funds will also be used to reduce environmental impact and improve safety processes and working conditions.

The other €5 million will be spent on improving production flexibility at the decorative paints site in Montataire, which is one of the company’s most important manufacturing locations for wall paints in Europe.

The plans for Pamiers include the construction of two extensions, one for storage and one for cleaning and waste treatment. The project will also enable the company to relocate the production of exterior polyurethane paints for aircraft widely used in Europe from its Waukegan plant in the US.

Building work is expected to start by the end of 2023, with the new installations at both locations due to be operational in early 2025.

AkzoNobel employs nearly 1,500 people in France and operates four production facilities, in Montataire (decorative paints), Dourdan (powder coatings), Limoges (adhesive markings) and Pamiers (aerospace coatings).

Weitere Informationen:
AkzoNobel Coatings aerospace
Quelle:

AkzoNobel

(c) COBRA International
12.04.2022

COBRA International showcases its portfolio for vehicle systems at AUVSI XPONENTIAL 2022

Cobra International will showcase its portfolio of design and manufacturing solutions for the unmanned vehicle systems sector when the company exhibits alongside long-term partner HiveGround at the AUVSI XPONENTIAL 2022 conference.

Taking centre stage on the Cobra stand will be a fully assembled Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for a broad range of survey, monitoring and search and rescue (SAR) operations. Cobra manufactured the 30kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.

Visitors to the Cobra stand will also see the VETAL, a twin rotor vertical take-off and landing (VTOL) drone with a composite airframe manufactured by Cobra for HiveGround, the Thailand based developer of UAV surveying and robotics systems.

Cobra International will showcase its portfolio of design and manufacturing solutions for the unmanned vehicle systems sector when the company exhibits alongside long-term partner HiveGround at the AUVSI XPONENTIAL 2022 conference.

Taking centre stage on the Cobra stand will be a fully assembled Swiftlet UAV. This compact tactical fixed wing UAV platform has a 5.5m wingspan and was developed by the Royal Thai Air Force and National Science and Technology Development Agency (NSTDA) for a broad range of survey, monitoring and search and rescue (SAR) operations. Cobra manufactured the 30kg Swiftlet composite airframe using a combination of CNC cut carbon sandwich internal structure and PVC foam sandwich skins using both high grade glass fibre and carbon fibre reinforcements.

Visitors to the Cobra stand will also see the VETAL, a twin rotor vertical take-off and landing (VTOL) drone with a composite airframe manufactured by Cobra for HiveGround, the Thailand based developer of UAV surveying and robotics systems.

At AUVSI XPONENTIAL, Cobra will also illustrate how the company leverages innovation and expertise developed in its water sports and automotive business to enhance its product offering to the UAV sector. Products on display include a Fliteboard electric foiling surfboard, pre-preg hydrofoil parts, lightweight medical prosthetics, flax and forged carbon parts, as well as a full set of visual carbon and painted automotive trims, each demonstrating the company’s high volume production capacity for ultra-light carbon composite structures.

The show will take place from the 25 to 28 April at the Orange County Convention Center, Orlando, Florida.

Quelle:

COBRA International / 100% Marketing

Expansion begins at Hexcel Engineered Core Operations Plant in Morocco (c) Hexcel Corporation
15.03.2022

Expansion begins at Hexcel Engineered Core Operations Plant in Morocco

Hexcel Corporation hosted customers and public officials at its manufacturing site in the Midparc Free Trade Zone in Casablanca as the company broke ground on an expansion that will double the size of its existing engineered core manufacturing operation in Morocco to meet increased demand from aerospace customers for lightweight advanced composites.

The expansion, announced in September 2021, is expected to be completed in early 2023. The plant size will double to 24,000 square meters and employment is expected to increase from 120 to 400 people when the expansion is completed.

The Casablanca facility was built as part of Hexcel’s ongoing worldwide investment to create a diversified and robust global supply chain to support aerospace customers’ growing demand for engineered core. At the plant, Hexcel transforms lightweight honeycomb materials into engineered core parts to reinforce structures in the aerospace industry, particularly for aircraft, engine nacelles, and helicopter blades.

Hexcel Corporation hosted customers and public officials at its manufacturing site in the Midparc Free Trade Zone in Casablanca as the company broke ground on an expansion that will double the size of its existing engineered core manufacturing operation in Morocco to meet increased demand from aerospace customers for lightweight advanced composites.

The expansion, announced in September 2021, is expected to be completed in early 2023. The plant size will double to 24,000 square meters and employment is expected to increase from 120 to 400 people when the expansion is completed.

The Casablanca facility was built as part of Hexcel’s ongoing worldwide investment to create a diversified and robust global supply chain to support aerospace customers’ growing demand for engineered core. At the plant, Hexcel transforms lightweight honeycomb materials into engineered core parts to reinforce structures in the aerospace industry, particularly for aircraft, engine nacelles, and helicopter blades.

At the event, Thierry Merlot, Hexcel President – Aerospace for Europe, MEA/AP & Industrial, said, “We are pleased to celebrate this milestone with our customers and with the local community. The increased demand for lightweight, aerodynamic, advanced composites is growing, and our customers including Safran, Airbus, Airbus Atlantic, Boeing and Spirit AeroSystems have shown confidence in our ability to meet that demand. We appreciate the support from them as well as from the Ministry and everyone in the local community who continue providing us with the opportunity to further our investment in Morocco. The very successful establishment of Hexcel, the qualification of the workforce, the support of the state and the proximity of our customers have been real assets to launch this extension of our site in Casablanca.”

Quelle:

Hexcel Corporation

03.02.2022

The 2022 JEC Composites Innovation Awards: Official Finalists line up

Première Vision - Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composite industry.
The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

After pre-selection of the finalists, one winner is selected in each category:

  • Aerospace – Application
  • Aerospace – Process
  • Automotive & road transportation – surface
  • Automotive & road transportation – structural
  • Building & Civil Engineering
  • Design, Furniture & Home
  • Equipment & Machinery
  • Maritime Transportation & Shipbuilding
  • Sports, Leisure & Recreation
  • Renewable Energy

The international jury representing the entire composites value chain includes:

Première Vision - Each year, since its creation more than 20 years ago, the JEC Composites Innovation Awards celebrate successful projects and cooperation between players of the composite industry.
The competition has especially shined a light on some 203 companies and 499 partners, awarding them for the excellence of their composite innovations.

After pre-selection of the finalists, one winner is selected in each category:

  • Aerospace – Application
  • Aerospace – Process
  • Automotive & road transportation – surface
  • Automotive & road transportation – structural
  • Building & Civil Engineering
  • Design, Furniture & Home
  • Equipment & Machinery
  • Maritime Transportation & Shipbuilding
  • Sports, Leisure & Recreation
  • Renewable Energy

The international jury representing the entire composites value chain includes:

  • Michel COGNET, Chairman of the Board, JEC Group
  • Christophe BINETRUY, Professor of Mechanical Engineering, EC Nantes
  • Kiyoshi UZAWA, Professor/Director, Innovative Composite Center, Kanazawa Institute of Technology
  • Jiming Sung HA, Professor, Hanyang University
  • Brian KRULL, Global Director of Innovation, Magna Exteriors Inc
  • Karl-Heinz FULLER, Manager Future Outside Materials, Mercedes Benz AG
  • Deniz KORKMAZ, CTO, Kordsa Teknik Tekstil AS
  • Henry SHIN, Head of Center, K-CARBON
  • Véronique MICHAUD, Associate Professor/ Director, EPFL – Laboratory for Processing of Advanced Composites
  • Alan BANKS, Lightweight Innovations Manager, Ford Motor Company
  • Enzo CRESCENTI, Technical Authority and Composite Expert, Airbus

Discover the finalists in each category here.

Quelle:

JEC Group

19.10.2021

Teijin steigert Produktion von Carbonfaser-Prepregs für Luft- und Raumfahrtanwendungen

Teijin Limited gab heute bekannt, dass seine Carbonfaser-Tochter Renegade Materials Corporation – ein führender US-amerikanischer Anbieter von hochhitzebeständigen duroplastischen Prepregs, Harzen und Klebstoffen für die Luft- und Raumfahrtindustrie – seine Produktionskapazitäten für Prepreg um das etwa 2,5-fache erweitern wird. Die erhöhte Kapazität entspricht der Erweiterungsstrategie von Renegade am Standort Miamisburg, Ohio und ist das Ergebnis einer im Dezember 2019 getätigten Investition von 4 Millionen USD. Die Installationsarbeiten begannen im März 2020 und der Betrieb der neuen Produktionslinien wird im Januar 2022 aufgenommen.

Die hitzebeständigen duroplastischen Prepregs, Harze und Klebstoffe von Renegade Materials genießen bei US-amerikanischen und europäischen Flugzeugherstellern und Zulieferern von Flugzeugtriebwerken großes Vertrauen.

Teijin Limited gab heute bekannt, dass seine Carbonfaser-Tochter Renegade Materials Corporation – ein führender US-amerikanischer Anbieter von hochhitzebeständigen duroplastischen Prepregs, Harzen und Klebstoffen für die Luft- und Raumfahrtindustrie – seine Produktionskapazitäten für Prepreg um das etwa 2,5-fache erweitern wird. Die erhöhte Kapazität entspricht der Erweiterungsstrategie von Renegade am Standort Miamisburg, Ohio und ist das Ergebnis einer im Dezember 2019 getätigten Investition von 4 Millionen USD. Die Installationsarbeiten begannen im März 2020 und der Betrieb der neuen Produktionslinien wird im Januar 2022 aufgenommen.

Die hitzebeständigen duroplastischen Prepregs, Harze und Klebstoffe von Renegade Materials genießen bei US-amerikanischen und europäischen Flugzeugherstellern und Zulieferern von Flugzeugtriebwerken großes Vertrauen.

Renegade Materials wird sein hochhitzebeständiges duroplastisches Prepreg auf der Composites and Advanced Materials Expo (CAMX) präsentieren. Die CAMX ist einer der größten und umfassendsten Veranstaltungen für Verbundwerkstoffe und Hochleistungsmaterialien in Nordamerika und findet vom 19. bis 21. Oktober im Dallas Convention Center in Dallas, Texas statt.

Quelle:

Teijin Carbon Europe GmbH

14.10.2021

Monforts: Automated finishing at Knopf’s Sohn

Knopf’s Sohn, a contract finisher of technical textiles, has installed a fully automated Montex stenter at its plant in Helmbrechts, Germany.
Knopf’s Sohn is processing technical textiles for the automotive, aerospace, home furnishings and workwear markets, based on wool, cellulose, polyamide and polyester fabrics, along with elastane blends, in weights of 80-800gsm.

The Montex machinery range is constantly being upgraded to meet evolving customer needs for greater automation, ease of operation and energy optimisation. The latest ten chamber line at Knopf’s Sohn, with a working width of up to 2.0 metres, was engineered to specific requirements in order to accelerate the company’s move to fully automatic control of its production, and high scaffolding was required for its installation.

The line benefits from two integrated ECO Booster modules to provide high energy savings. These compact, air-to-air heat exchangers, installed within the roof structure of the line, exploit energy from the exhaust gas to preheat up to 60% of the incoming fresh air entering the stenter.

Knopf’s Sohn, a contract finisher of technical textiles, has installed a fully automated Montex stenter at its plant in Helmbrechts, Germany.
Knopf’s Sohn is processing technical textiles for the automotive, aerospace, home furnishings and workwear markets, based on wool, cellulose, polyamide and polyester fabrics, along with elastane blends, in weights of 80-800gsm.

The Montex machinery range is constantly being upgraded to meet evolving customer needs for greater automation, ease of operation and energy optimisation. The latest ten chamber line at Knopf’s Sohn, with a working width of up to 2.0 metres, was engineered to specific requirements in order to accelerate the company’s move to fully automatic control of its production, and high scaffolding was required for its installation.

The line benefits from two integrated ECO Booster modules to provide high energy savings. These compact, air-to-air heat exchangers, installed within the roof structure of the line, exploit energy from the exhaust gas to preheat up to 60% of the incoming fresh air entering the stenter.

The use of a single ECO Booster unit has been calculated to save up to 35% in energy costs, based on fixation processes. Fully automatic operation, set at the Monforts Qualitex control unit, ensures there is no additional burden on the machine operator.

The line is powered by Exxotherm indirect heating, which practically eliminates the yellowing which can be experienced during the treatment of certain polyamide and elastane-based fabrics, and is also equipped with a Conticlean circulating air filter system for constant high drying capacity.

Software
The latest Qualitex visualisation software offers operators reliability and easy control with its full HD multi-touch monitor and slider function, dashboard function with individual adaptation to operating states and faster access to comprehensive recipe data management.

With the Monformatic control system, the exact maintenance of the dwell time in combined treatment processes (drying and heat-setting) can be monitored. When the heat-setting point is reached, the fan speed is automatically adjusted, keeping energy consumption fully under control.

Quelle:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

19.07.2021

ISKO to work with the MIT Computer Science & Artificial Intelligence Lab

ISKO announces its participation in CSAIL’s Alliances programme, a collaboration with CSAIL researchers, students and industry partners. Through participation in the programme, ISKO will contribute its expertise in textile innovation and collaborate on the research and development of smart textiles and wearable technologies.

The company joins a network of 26 industries – from startups to big organizations – including AI and machine learning, aerospace, healthcare, life sciences and telecommunications, as well as retail, media and entertainment.

With the goal of overall advancement of the textile and denim industry through the development of smart and wearable solutions, ISKO is stepping up to lead the change through these technologies and their many possible end-uses. The work is done in compliance with ISKO’s Responsible Innovation™ approach.

ISKO brings its innovative and agile structure, impressive production capacity and textile knowledge to the CSAIL programme which has over 1200 people, 60 research groups, 120+ researchers, 600+ students and over 900+ active projects.

ISKO announces its participation in CSAIL’s Alliances programme, a collaboration with CSAIL researchers, students and industry partners. Through participation in the programme, ISKO will contribute its expertise in textile innovation and collaborate on the research and development of smart textiles and wearable technologies.

The company joins a network of 26 industries – from startups to big organizations – including AI and machine learning, aerospace, healthcare, life sciences and telecommunications, as well as retail, media and entertainment.

With the goal of overall advancement of the textile and denim industry through the development of smart and wearable solutions, ISKO is stepping up to lead the change through these technologies and their many possible end-uses. The work is done in compliance with ISKO’s Responsible Innovation™ approach.

ISKO brings its innovative and agile structure, impressive production capacity and textile knowledge to the CSAIL programme which has over 1200 people, 60 research groups, 120+ researchers, 600+ students and over 900+ active projects.

Quelle:

ISKO / Menabò Group srl

Hexcel showcases Carbon Fiber Prepreg Capability for UAV Applications (c) Hexcel Corporation
07.07.2021

Hexcel showcases Carbon Fiber Prepreg Capability for UAV Applications

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel Neumarkt was one of eight industrial partners supporting the university team throughout the project, providing all carbon fiber prepreg materials used for the drone’s landing gear as well as the fuselage. The ultra-lightweight 32g landing gear was laid up and cured in the press, whereas the fuselage was autoclave cured by the student team using Hexcel HexPly M901 and HexPly M78.1 prepreg resin systems with a combination of woven and unidirectional carbon fiber reinforcements.

With the development of Unmanned Aerial Vehicles (UAV) as a key emerging market and innovation space in the transportation sector, Hexcel’s collaboration with the University of Applied Sciences Upper Austria team not only creates an important link with the next generation of lightweight composite engineers but also highlights the weight saving and structural benefits of Hexcel composite material solutions.

"The massive weight saving achieved with their updated version of the camera drone is a fantastic achievement by the student team," said Michael Rabl, Dean of FH Wels of the Upper Austria University of Applied Sciences. "The joint study not only illustrates the wide range of complex and innovative composite techniques present in the drone sector but also presents the opportunities that exist for further development in the wider Urban Air Mobility (UAM) and aerospace composites markets.”

Hexcel congratulates the project team which includes Lukas Weninger, Karl-Heinz Schneider, Jakob Schlosser, Matthias Thon, Marla Unter, and Simone Hartl on an exceptional piece of lightweight composite design and thanks them for showcasing the contribution of Hexcel materials with a presentation and drone flight. Johanna Arndt, research and technology group leader at Hexcel Neumarkt, said, “It was a great pleasure to work with the team who were very cooperative and self-motivated to succeed. Watching the drone just fly around the Neumarkt plant was just great.”

Hexcel manufactures a complete range of carbon fibers, dry carbon UD tapes, specialty reinforcements, prepregs, and honeycomb core materials, providing customized manufacturing options for new UAM applications that combine aerospace reliability with the high-rate production required. Hexcel composite materials are the ideal solution for the lightest and most efficient cost-competitive transportation vehicles of the future.

Quelle:

Hexcel Corporation / 100% Marketing

11.05.2021

JEC Composites Innovation Awards 2021: Finalists Line Up Revealed

Innovation is an essential part of this industry – it's how we invest in our future. The top priorities for players in the composites value chain include product solidity, safety, and durability. The JEC Composites Innovation Awards are meant to inspire all participants, the whole industry and shed light on the excellent work carried out by the prize winners.

After pre-selecting the finalists, a selection process and a jury will select one winner in each category (Aerospace; Automotive & road transportation – exterior; Automotive & road transportation – structural; Building; Construction & Infrastructure, Design; Equipment & Machinery and Sustainability)

The awards ceremony will take place during JEC Composites Connect on Wednesday, June 2nd at 2:30 pm CEST.

More information here.

Innovation is an essential part of this industry – it's how we invest in our future. The top priorities for players in the composites value chain include product solidity, safety, and durability. The JEC Composites Innovation Awards are meant to inspire all participants, the whole industry and shed light on the excellent work carried out by the prize winners.

After pre-selecting the finalists, a selection process and a jury will select one winner in each category (Aerospace; Automotive & road transportation – exterior; Automotive & road transportation – structural; Building; Construction & Infrastructure, Design; Equipment & Machinery and Sustainability)

The awards ceremony will take place during JEC Composites Connect on Wednesday, June 2nd at 2:30 pm CEST.

More information here.

Quelle:

JEC Group