Aus der Branche

Zurücksetzen
53 Ergebnisse
Cinte Techtextil China 2023 with different zones (c) Messe Frankfurt (HK) Ltd
14.09.2023

Cinte Techtextil China 2023 with different zones

Technological progress often results from close collaboration, and industries that rely on continual improvement stand to benefit from the return to in-person business. Cinte Techtextil China’s first edition since eased pandemic measures is set to reflect a 27.9% increase in exhibitor numbers, with a rejuvenated international contingent further supplemented by the return of the European Zone. Taking place from 19 – 21 September across 40,000 sqm at the Shanghai New International Expo Centre, the platform is expected to welcome buyers from across Asia, Europe, and beyond. Pre-registrations have doubled compared to the previous edition, and international buyers account for over 20% of the total.

The new zone, Marine Textile Zone, will be comprised of multiple Chinese green marine and nautical rope netting exhibitors, while also hosting the Technology Exchange Forum, and the awards ceremony of the Top 10 Suppliers in the China Rope Net Industry. Prominent exhibitors in this zone include Ropenet Group, Hunan Xinhai, and Zhejiang Four Brothers Rope.

Technological progress often results from close collaboration, and industries that rely on continual improvement stand to benefit from the return to in-person business. Cinte Techtextil China’s first edition since eased pandemic measures is set to reflect a 27.9% increase in exhibitor numbers, with a rejuvenated international contingent further supplemented by the return of the European Zone. Taking place from 19 – 21 September across 40,000 sqm at the Shanghai New International Expo Centre, the platform is expected to welcome buyers from across Asia, Europe, and beyond. Pre-registrations have doubled compared to the previous edition, and international buyers account for over 20% of the total.

The new zone, Marine Textile Zone, will be comprised of multiple Chinese green marine and nautical rope netting exhibitors, while also hosting the Technology Exchange Forum, and the awards ceremony of the Top 10 Suppliers in the China Rope Net Industry. Prominent exhibitors in this zone include Ropenet Group, Hunan Xinhai, and Zhejiang Four Brothers Rope.

Other domestic exhibitors, such as Shanghai Shenda Kebao New Materials, SIJIA New Material (Shanghai), Zhejiang Hailide New Material, and Zhejiang Jinda New Materials, will showcase products for applications in outdoor advertising, tents, boats, vehicles, environmental engineering, and much more.

Supplementing the fairground’s wide variety of domestic suppliers will be a much-increased showing of international exhibitors, with many to be found within hall E1’s European Zone. Several global industry leaders are featured in their categories below:

Nonwovens equipment

  • Autefa Solutions, Germany: solutions provider for nonwovens lines and machines for carded-crosslapped needlepunching lines, spunlace lines and thermobonding lines.
  • Dilo, Germany: in addition to offering general services, Dilo supplies opening and blending equipment, carding and airlay machines, and crosslapping and needling machines.
  • Groz-Beckert, Germany: provider of industrial machine needles, precision parts and fine tools, as well as systems and services for the production and joining of textile fabrics.
  • Reifenhäuser Reicofil, Germany: provider of innovative technologies and components for plastics extrusion, producing blown films, cast films, sheets as well as nonwovens.

Weaving equipment

  • Itema, Italy: provider of advanced weaving machines, spare parts, and integrated services, specifically for rapier, air jet and projectile weft insertion technologies.
  • Lindauer DORNIER, Germany: the company manufactures weaving machines, film stretching lines, and composite systems, also offering technical support and spare parts supply.
  • Picanol, Belgium: producer and servicer of high-tech air jet and rapier weaving machines, with around 2,600 weaving mills utilising their systems worldwide.

Coating and lamination

  • BRÜCKNER Textile Technologies, Germany: manufacturer of machines and lines for the coating and finishing of apparel fabric, technical textiles, nonwovens, glass fabrics and floor coverings.
  • ROWA Lack, Germany: developer of high-quality materials and product solutions for the polymer industry, with applications including automotive, electrical engineering, construction, technical textiles, and medical technology.
  • Stahl, the Netherlands: the Dutch company provides high quality coatings, dyes and process chemicals for leather, flexible coated substrates, textiles, films and foils, paper, and related products.

Fibre

  • Monosuisse, Switzerland: with production sites in Switzerland, Poland, Romania, Mexico, and Germany, Monosuisse manufactures various precise, high-quality polymer monofilaments from 19µm to 3.00 mm in diameter.
  • Perlon, Germany: specialised in the manufacture of synthetic filaments in diverse application areas, including paper machine clothing, dental care, and advanced technical textiles for agriculture, 3D printing, sports and leisure, home, and more.

Meanwhile, first-time exhibitors include Rökona (Germany), showcasing RE:SPACE, their range of recycled technical textiles; Testex AG (Switzerland), the official OEKO-TEX® representative in multiple countries including China; Hohenstein (Germany), the renowned testing laboratory and research institute; and zwissTEX (Germany), the knitted fabrics and lamination specialists. In addition, the returning Taiwan Pavilion is set to feature the debut of Shinih Enterprise Co Ltd (Taiwan China).

Beyond the innovation displayed at the booths, the fair’s programme is set to welcome global experts from various technical textile and nonwoven sub-sectors to offer specific insights and unveil innovations. Highlighted events include:

The 11th China International Nonwovens Conference
14 sessions cover topics such as the quality control of medical supplies; green development in technology and applications in the nonwovens industry; and the development and application of flashspun nonwovens in China.

Marine textiles and rope netting events
Events specific to this zone include the Top 10 Suppliers in the China Rope Net Industry; Conference on Textile Applications for Marine Engineering and Fisheries; and the China Nonwovens & Industrial Textiles Association (CNITA) Rope Net Branch Council Meeting

"Nonwovens, Creating a Better Life” Innovation Showcase
Product display area showcasing around 100 nonwovens products with applications in five areas: medical and health, quality of life, human habitat, sustainable development, and innovative design.

Advanced Technical Textiles Industry Chain Synergistic Innovation Development Forum
Includes presentations from multiple key players in the technical textile industry, including Mr Steven Liu, Commercial Manager of Polymer Additives Business of Sanitized (China) Ltd.

Quelle:

Messe Frankfurt (HK) Ltd

(c) Messe Frankfurt (HK) Ltd
02.06.2023

Over 366 Exhibitors at Cinte Techtextil China 2023

With four months until the technical textiles and nonwovens show opens its doors, floor space booked by international suppliers is already more than double the area of the previous edition, which attracted 366 exhibitors from eight countries and regions. Taking place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, this year’s fair will see the European Zone return to the fairground. The high-traffic zone is set to welcome a number of new and returning exhibitors eager to showcase their products to a business-hungry domestic market.

Speaking at the fair’s previous edition in 2021, Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, said: “The Chinese market is a big opportunity for everybody, because every day the market is demanding more. The potential here is incredible, and there is more demand for overseas brands. These brands are known for their very high quality, and while China’s industry has developed very well in the past few years, it still needs support from overseas brands with high quality products. This fair is good for us, and we exhibit here every year.”

With four months until the technical textiles and nonwovens show opens its doors, floor space booked by international suppliers is already more than double the area of the previous edition, which attracted 366 exhibitors from eight countries and regions. Taking place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, this year’s fair will see the European Zone return to the fairground. The high-traffic zone is set to welcome a number of new and returning exhibitors eager to showcase their products to a business-hungry domestic market.

Speaking at the fair’s previous edition in 2021, Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, said: “The Chinese market is a big opportunity for everybody, because every day the market is demanding more. The potential here is incredible, and there is more demand for overseas brands. These brands are known for their very high quality, and while China’s industry has developed very well in the past few years, it still needs support from overseas brands with high quality products. This fair is good for us, and we exhibit here every year.”

Multiple domestic and international exhibitors have confirmed their participation at Cinte Techtextil China 2023, with the European Zone playing host to FMMG and other key industry players, such as:

  • Bekaert, Belgium
  • Fil Man Made Group, Italy
  • SANITIZED, Switzerland
  • SCANTECH, France

Outside the European Zone, additional international suppliers will showcase their diverse product applications at the fairground, with categories including Coating & Bondtec (Stahl); Fibre & Yarn (Barnet); Nonwovens Equipment (Dilo); Technology & Machinery (Picanol); and Testing Equipment & Certification (TESTEX). Other European exhibitors in these categories include Autefa Solutions, Reifenhauser Heinsberg, Reifenhauser Reicofil, and SICAM.

Chinese suppliers set to complement international contingent
A comprehensive range of domestic exhibitors are eager to meet new buyers and renew old business connections at this year’s fair, including:

  • Shanghai Shenda Kebao New Materials
  • SIJIA New Material (Shanghai)
  • Zhejiang Jinda New Materials
  • Zhejiang Hailide New Material

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

Quelle:

Messe Frankfurt (HK) Ltd

Foto Mahlo GmbH + Co. KG
23.03.2023

Mahlo auf der INDEX 2023: Nonwovens im Fokus

Wenn sich die Nonwoven Industry vom 18. bis 21. April auf der Leitmesse INDEX in Genf trifft, erwartet die Mahlo GmbH + Co. KG Fachbesucher aus aller Welt, um sie über die richtige Messtechnik für eine effizientere und hochwertige Produktion von Vliesstoffen zu informieren.

Mit einer großen Auswahl an Sensorik, verschiedenen Messtechniken und den dazugehörigen Messbrücken lassen sich verschiedenste Aufgaben hinsichtlich der Kontrolle von Flächengewicht, Feuchte, Dicke, Faseranteile, Luftdurchlässigkeit kosteneffizient und praxisgerecht lösen.

Wenn sich die Nonwoven Industry vom 18. bis 21. April auf der Leitmesse INDEX in Genf trifft, erwartet die Mahlo GmbH + Co. KG Fachbesucher aus aller Welt, um sie über die richtige Messtechnik für eine effizientere und hochwertige Produktion von Vliesstoffen zu informieren.

Mit einer großen Auswahl an Sensorik, verschiedenen Messtechniken und den dazugehörigen Messbrücken lassen sich verschiedenste Aufgaben hinsichtlich der Kontrolle von Flächengewicht, Feuchte, Dicke, Faseranteile, Luftdurchlässigkeit kosteneffizient und praxisgerecht lösen.

Als ein Beispiel nennt Wulbeck Spunlace-Produkte. Sie bestehen hauptsächlich aus Fasern wie Baumwolle, PE, PET oder Rayon. Die absorbieren im Nahinfrarotbereich Licht. Wasser und alle weiteren Materialien weisen verschiedene Spektralbereiche auf und lassen sich so unterscheiden. Der Nahinfrarot-Sensor Infrascope NIR ermittelt durch die Abschwächung des Lichts in bestimmten Wellenlängen den Feuchtegehalt und das Flächengewicht verschiedener Materialien. Aufgrund seiner sehr hohen spektralen Auflösung kann der Sensor zwischen Komponenten mit sehr ähnlicher, aber nicht identischer IR-Absorption unterscheiden und erreicht eine hohe Messgenauigkeit. „Bis zu 0,05 g/m2 des jeweiligen Beschichtungsgewichts sind möglich“, so Wulbeck.

„Wir möchten die Hersteller dabei unterstützen, ihre Produktionsabläufe und damit auch das Endprodukt zu optimieren,“ sagt Matthias Wulbeck, Mahlo-Produktmanager für QCS. Denn wie viele andere Industrien hat auch der Nonwoven-Sektor mit Herausforderungen wie den steigenden Preisen für Energie und Rohstoffe, langen Lieferzeiten und unsicheren Lieferketten zu kämpfen. Um weiter wirtschaftlich und zeitgenau zu produzieren, muss man also Ressourcen einsparen, und Fehlproduktionen sowie unnötige Prozesszeiten vermeiden. „Unser Mess- und Regelsystem Qualiscan QMS trägt genau dazu bei.“

Quelle:

Mahlo GmbH + Co. KG

Photo Fibre Extrusion Technology Ltd (FET)
23.03.2023

FET prepares for INDEX 23 Exhibition in Geneva

Fibre Extrusion Technology Ltd (FET) of Leeds, UK will shortly be exhibiting at INDEX 23, the leading nonwovens exhibition in Geneva, 18-21 April.

As well as featuring its latest meltblown and spunbond technology, FET will focus on its new Fibre Development Centre. Construction and fit-out of this new purpose-built building is now fully operational. This modern two-storey development provides state-of-the-art facilities, including enhanced laboratory for client testing and product development.

Resident equipment in the Fibre Development Centre reflects the wide range of fibre extrusion systems offered by FET to clients across the globe and will enable continued growth of the company through innovation.  

Complementing FET’s highly successful meltblown technology, the more recent spunbond range provides unprecedented opportunities for the scaled development of new nonwoven fabrics based on a wide range of fibres and polymers, including bicomponents.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK will shortly be exhibiting at INDEX 23, the leading nonwovens exhibition in Geneva, 18-21 April.

As well as featuring its latest meltblown and spunbond technology, FET will focus on its new Fibre Development Centre. Construction and fit-out of this new purpose-built building is now fully operational. This modern two-storey development provides state-of-the-art facilities, including enhanced laboratory for client testing and product development.

Resident equipment in the Fibre Development Centre reflects the wide range of fibre extrusion systems offered by FET to clients across the globe and will enable continued growth of the company through innovation.  

Complementing FET’s highly successful meltblown technology, the more recent spunbond range provides unprecedented opportunities for the scaled development of new nonwoven fabrics based on a wide range of fibres and polymers, including bicomponents.

Quelle:

Fibre Extrusion Technology Ltd (FET)

Dr. Stefan König (c) Optima
Dr. Stefan König
23.02.2023

Dr. Stefan König verantwortet künftig auch Optima nonwovens GmbH

Zum 1. März 2023 überträgt Hans Bühler, geschäftsführender Gesellschafter der Optima Gruppe, die Verantwortung für den Geschäftsbereich Optima Nonwovens an Dr. Stefan König, Geschäftsführer der OPTIMA packaging group GmbH. Dr. König übernimmt die Verantwortung aller zugehörigen Nonwovens-Einheiten weltweit.

„Mit dieser Entscheidung fördern wir die intensive Zusammenarbeit aller Einheiten, die Maschinen und Services für den Konsumgüter-markt liefern. Dr. Stefan König verfügt über ein sehr großes Fach- und Führungswissen, das ihn als erfahrenen Manager auszeichnet. Die Positionen und Aufgaben der beiden Geschäftsführer von Optima Nonwovens, Dr. Georg Pfeifer und Oliver Rebstock, bleiben dabei unverändert“, erläutert Hans Bühler.

Seit März 2021 ist König in der Geschäftsführung von Optima unter anderem verantwortlich für die Geschäftsbereiche Consumer und Life Science sowie für das Thema zentrale Nachhaltigkeit. Vor seinem Wechsel zu Optima war König über 20 Jahre lang in leitenden Managementpositionen tätig, davon vier Jahre in Asien. Zuletzt war König CEO bei einem weltweit tätigen Konzern.

Zum 1. März 2023 überträgt Hans Bühler, geschäftsführender Gesellschafter der Optima Gruppe, die Verantwortung für den Geschäftsbereich Optima Nonwovens an Dr. Stefan König, Geschäftsführer der OPTIMA packaging group GmbH. Dr. König übernimmt die Verantwortung aller zugehörigen Nonwovens-Einheiten weltweit.

„Mit dieser Entscheidung fördern wir die intensive Zusammenarbeit aller Einheiten, die Maschinen und Services für den Konsumgüter-markt liefern. Dr. Stefan König verfügt über ein sehr großes Fach- und Führungswissen, das ihn als erfahrenen Manager auszeichnet. Die Positionen und Aufgaben der beiden Geschäftsführer von Optima Nonwovens, Dr. Georg Pfeifer und Oliver Rebstock, bleiben dabei unverändert“, erläutert Hans Bühler.

Seit März 2021 ist König in der Geschäftsführung von Optima unter anderem verantwortlich für die Geschäftsbereiche Consumer und Life Science sowie für das Thema zentrale Nachhaltigkeit. Vor seinem Wechsel zu Optima war König über 20 Jahre lang in leitenden Managementpositionen tätig, davon vier Jahre in Asien. Zuletzt war König CEO bei einem weltweit tätigen Konzern.

Weitere Informationen:
Optima nonwovens packaging
Quelle:

Optima

(c) Messe Frankfurt (HK) Ltd
08.02.2023

Cinte Techtextil China 2023 set for September

With China easing its pandemic restrictions, foreign exhibitors and buyers can look forward to quarantine-free travel when participating at this year’s industry showcase in Shanghai. The technical textile and nonwovens fair is scheduled to take place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, amid positive market forecasts for both sectors. The organisers are anticipating a strong showing and the conclusion of an inconsistent period for in-person textile business.

“The industry has demonstrated incredible patience and resilience over the course of the pandemic,” said Ms Wilmet Shea, General Manager of Messe Frankfurt (HK) Ltd. “With both markets growing and China opening its borders, we are excited at the prospect of providing participants with an international, business-friendly platform and expect to welcome a healthy number of exhibitors later this year.”

With China easing its pandemic restrictions, foreign exhibitors and buyers can look forward to quarantine-free travel when participating at this year’s industry showcase in Shanghai. The technical textile and nonwovens fair is scheduled to take place from 19 – 21 September 2023 at the Shanghai New International Expo Centre, amid positive market forecasts for both sectors. The organisers are anticipating a strong showing and the conclusion of an inconsistent period for in-person textile business.

“The industry has demonstrated incredible patience and resilience over the course of the pandemic,” said Ms Wilmet Shea, General Manager of Messe Frankfurt (HK) Ltd. “With both markets growing and China opening its borders, we are excited at the prospect of providing participants with an international, business-friendly platform and expect to welcome a healthy number of exhibitors later this year.”

The global technical textile and nonwovens markets are both set to perform strongly over the next few years. According to Grand View Research, the technical textile market is forecast to expand at a CAGR of 4.7% from 2022 to 2030[1]. The nonwoven fabrics market is anticipated to display an even stronger CAGR of 5.6% during the same period[2], with Asia-Pacific to maintain its position as the biggest regional market.

As one of Asia’s leading trade fairs for the abovementioned sectors, Cinte Techtextil China is the preferred platform for multiple industry players. Speaking at the previous edition in 2021, Mr Seven Shen, Sales Manager at Libero Trading (Shanghai) Co Ltd, China, said: “We have been exhibiting at this fair for years, and know we will meet our target customers at every edition. The buyers here are all highly specialised.”

During his interview at the same edition, Mr Eric Ni, Senior Manager, China Supply Chain Marketing for Cotton Council International, USA, commented: “We hope to use this platform to meet more companies and brands in the nonwovens industry who are interested in US cotton, and to meet up with old friends to discuss the current situation and industry trends. The fair’s buyers are quality, and we have found some new potential clients at this edition.”

Many buyers at the previous edition also gave positive appraisals. “As a professional trade fair for technical textile and nonwoven products, Cinte Techtextil China is not only a platform to gather qualified industry players, but also the best place to showcase new products and innovations,” said Mr Lin Bin, Technical Director at Zhejiang Xinna Medical Device Technology Co Ltd, China. “Specific and high quality products enhance sourcing efficiency for buyers, and exposure to new trends and market developments ensures my company visits here regularly.”

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

[1] “Technical Textile Market Size, Share & Trends Analysis Report 2022-2030”, 2022, Grand View Research, https://bit.ly/3IAxQIK, (Retrieved: January 2023)
[2] “Nonwoven Fabrics Market Size”, 7 September 2022, GlobeNewswire, https://bit.ly/3CxPE3u, (Retrieved: January 2023)

Quelle:

Messe Frankfurt (HK) Ltd

08.09.2022

Monforts at ITMA ASIA + CITME

Monforts will highlight its technologies for special technical textile applications at this year’s ITMA ASIA + CITME which takes place at the National Exhibition and Convention Center in Shanghai, China, from November 20-24.

One of Monforts' developments is the Montex 8500 XXL stenter system for the production of technical fabrics in widths of up to 6.8 metres. Among the products made on this system are treated nonwovens for the geotextiles and filter media markets, tarpaulins, advertising banners, black-out curtains, membranes and many more.

On Montex©Coat coating lines, meanwhile, the possibilities range from the single-sided application of finishing agents for outdoor clothing and adding functionality to home textiles, to the creation of materials for sophisticated lightweight construction and automotive and aerospace components.

Monforts will highlight its technologies for special technical textile applications at this year’s ITMA ASIA + CITME which takes place at the National Exhibition and Convention Center in Shanghai, China, from November 20-24.

One of Monforts' developments is the Montex 8500 XXL stenter system for the production of technical fabrics in widths of up to 6.8 metres. Among the products made on this system are treated nonwovens for the geotextiles and filter media markets, tarpaulins, advertising banners, black-out curtains, membranes and many more.

On Montex©Coat coating lines, meanwhile, the possibilities range from the single-sided application of finishing agents for outdoor clothing and adding functionality to home textiles, to the creation of materials for sophisticated lightweight construction and automotive and aerospace components.

“Many more applications are possible, such as the overdyeing of denim, the creation of double-face coated materials, fabrics awnings, tents and medical drapes and the pre-treatment of substrates for digital printing”, explains Gunnar Meyer, Monforts area sales manager for China. “A range of different doctor blades and their combinations can be supplied to meet individual requirements, including air knife, roller knife, foam, screen and magnetic roller coating. The latter option is recommended for lines with working widths of over 2.4 metres.”

In addition, Monforts can provide the necessary explosion-proof ranges for solvent-based coatings and high temperature processes up to 320°C, such as the PTFE coating of nonwoven filter material. These lines are equipped with special burners, stenter chains, and insulation.

Quelle:

 A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

(c) PURE LOOP
07.09.2022

PURE LOOP: Hochfestes Kunststoff-Vlies mit 10 Prozent Recyclinganteil

Geokunststoffe sind aus der Bauindustrie nicht mehr wegzudenken. Etwa PP-Vliesstoffe, mechanisch verfestigte Endlosfasern aus speziell UV-stabilisierten Polypropylenen, werden gerne als Trenn-, Schutz- und Filtervliese eingesetzt und verlängern durch ihre Stabilität die Lebensdauer von Bauprojekten. Ob für den Straßenbau, als Gletscher- oder Unkrautvlies – die Anwendungen sind vielfältig.

TenCate Geosynthetics recycelt seit kurzem PP-Vliesstoff auf PURE LOOPs ISEC evo. Das europäische Unternehmen mit Standorten in Österreich, Frankreich und den Niederlanden ist auf die Entwicklung und Produktion von Geokunstoffen für den modernen Tiefbau spezialisiert. Die bei der Produktion anfallenden Randbeschnitte und Produktionsausschüsse wurden bereits am Standort Linz recycelt, aber nicht in den eigenen Produktionsprozess zurückgeführt.

Geokunststoffe sind aus der Bauindustrie nicht mehr wegzudenken. Etwa PP-Vliesstoffe, mechanisch verfestigte Endlosfasern aus speziell UV-stabilisierten Polypropylenen, werden gerne als Trenn-, Schutz- und Filtervliese eingesetzt und verlängern durch ihre Stabilität die Lebensdauer von Bauprojekten. Ob für den Straßenbau, als Gletscher- oder Unkrautvlies – die Anwendungen sind vielfältig.

TenCate Geosynthetics recycelt seit kurzem PP-Vliesstoff auf PURE LOOPs ISEC evo. Das europäische Unternehmen mit Standorten in Österreich, Frankreich und den Niederlanden ist auf die Entwicklung und Produktion von Geokunstoffen für den modernen Tiefbau spezialisiert. Die bei der Produktion anfallenden Randbeschnitte und Produktionsausschüsse wurden bereits am Standort Linz recycelt, aber nicht in den eigenen Produktionsprozess zurückgeführt.

„Die Anforderungen an uns waren hoch“, erinnert sich Patrick Wiesinger, Projektmanager bei PURE LOOP. „Das PP-Vlies ist hochreißfest, das bedeutet einen sehr anspruchsvollen Recyclingprozess. Mit unserer ISEC evo Maschine ist eine besonders schonende Aufbereitung des Produktionausschusses möglich, womit wir die gewünschte Qualitätssteigerung bei den Rezyklaten erreichten.“

Ein weiterer Vorteil der PURE LOOP Technologie ist die große Bandbreite an Formen, in denen die Produktionsausschüsse zur Verabreitung geliefert werden können. „Unsere ifeed Technologie mit Doppelschiebersystem und Einwellenzerkleinerer bietet die idealen Voraussetzungen für die direkte Verarbeitung dieser großen Rollen – und zwar ohne, dass das Inputmaterial extra von Mitarbeiterinnen oder Mitarbeitern für den Recyclingprozess vorher aufbereitet werden muss“, betont Patrick Wiesinger. Der Einsatz der ISEC evo Recyclinganlage macht es möglich, dass TenCate sein hochfestes PP-Vlies nun mit einem Rezyklatanteil von bis zu 10 Prozent herstellt.

Quelle:

PURE LOOP, EREMA Group GmbH

Foto: Freudenberg Performance Materials
11.08.2022

Freudenberg Friction-Inserts-Technologie auf der WindEnergy Hamburg 2022

Auf der WindEnergy stellt Freudenberg Performance Materials dem Fachpublikum aus der internationalen Windenergiewirtschaft Freudenberg Friction Inserts vor. Mit Hilfe dieser Technologie kann die Leistungsdichte von Windkraftanlagen durch Reibwerterhöhung erhöht werden.

Freudenberg Friction Inserts (FFI) basieren auf einem speziellen dünnen Vliesstoff, der einseitig mit Hartpartikeln beschichtet ist. Die FFIs werden maßgeschneidert an die jeweilige Anwendung angepasst; zum einen an die Geometrie und zum anderen an die Einflussparameter der Verbindung. Sie erzeugen keinen Spalt und können dadurch genau dort aufgebracht werden wo sie benötigt werden.

Auf der WindEnergy stellt Freudenberg Performance Materials dem Fachpublikum aus der internationalen Windenergiewirtschaft Freudenberg Friction Inserts vor. Mit Hilfe dieser Technologie kann die Leistungsdichte von Windkraftanlagen durch Reibwerterhöhung erhöht werden.

Freudenberg Friction Inserts (FFI) basieren auf einem speziellen dünnen Vliesstoff, der einseitig mit Hartpartikeln beschichtet ist. Die FFIs werden maßgeschneidert an die jeweilige Anwendung angepasst; zum einen an die Geometrie und zum anderen an die Einflussparameter der Verbindung. Sie erzeugen keinen Spalt und können dadurch genau dort aufgebracht werden wo sie benötigt werden.

FFI werden in die Verbindung zweier Fügepartner eingebracht. Durch das Eindringen der Partikel in die Bauteiloberflächen kommt es zu einer Mikroverzahnung zwischen den zu fügenden Bauteilen. Auf diese Weise wird der Reibungskoeffizient zuverlässig erhöht und es können höhere Drehmomente in Verbindungen übertragen werden. Im Ergebnis werden Windkraftanlagen leistungsfähiger und effizienter. Zusätzlich wird die Verkleinerung von Bauteilen bei gleicher Performance möglich, was das Einsparen von Gewicht und Material ermöglicht.

FFI tragen dazu bei, die Zuverlässigkeit der Verbindungen und damit der gesamten Windkraftanlage zu verbessern. Gleichzeitig verhindern sie das Rutschen von Verbindungen und beugen Fretting vor.

Weitere Anwendungsbeispiele für Freudenberg Friction Inserts sind hochbelastete Flanschverbindungen zwischen Rotorwelle und Getriebe, Verbindungen zwischen Hauptlager und Gehäuse des Maschinenträgers, zwischen Getriebe und Generator sowie am Blattverstellergetriebe und am Hohlrad des Planetengetriebes. FFI erhöhen die Haftreibung zwischen den Bauteilen.

Quelle:

Freudenberg Performance Materials

22.06.2022

Avgol® wins Innovation Award at the RIGHT Hygiene conference

  • Biotransformation technology for nonwovens

Avgol® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

  • Biotransformation technology for nonwovens

Avgol® has received the prestigious Innovation Award at the RIGHT Hygiene conference in recognition of its collaboration with Polymateria in development of pioneering biotransformation technology for nonwovens.
 
Biotransformation is a unique functionality wherein a conventional nonwoven fabric can be modified to react to certain triggers to then begin a cascade, and importantly a fundamental chemical transformation of the polymer resin into a wax that is readily degraded by natural bacteria, microbes and fungi normally found in the environment.
 
“The transformation is triggered through the combined effects of the natural elements of decay - air, moisture, heat and sunlight,” said Mr. Sanjay Bhayani, Director of India Operations with Avgol. “Once triggered, the material will transform into a low molecular weight wax structure leaving no microplastics or toxic residue behind. Moreover, if the product comprising the biotransformation technology is disposed of in the normal way and facilities are available, then it can be recycled by readily available means.”

“By bringing the Biotransformation technology to the various potential markets in India, we hope to offer a real-world solution to waste management,” he said. “We particularly hope to address aspects of the creation of fugitive waste and remove this from the environment without causing additional, and potentially more dangerous, problems.”

Quelle:

Avgol

24.05.2022

INDA Releases 2022 Nonwovens Supply Report

Report Offers INDA Members Key Metrics to Assist in Strategic Planning and Investments

INDA, the Association of the Nonwovens Fabrics Industry, announces publication of the ninth edition of the annual North American Nonwovens Supply Report for its members.

Based on extensive research, producer surveys and interviews with industry leaders, the report provides an overall view of North American supply, including the key metrics of capacity, production and operating rates, in addition to regional trade, through the year 2021. The 75-page report contains 36 figures and 11 tables.

Findings from this year’s Supply Report include:

Report Offers INDA Members Key Metrics to Assist in Strategic Planning and Investments

INDA, the Association of the Nonwovens Fabrics Industry, announces publication of the ninth edition of the annual North American Nonwovens Supply Report for its members.

Based on extensive research, producer surveys and interviews with industry leaders, the report provides an overall view of North American supply, including the key metrics of capacity, production and operating rates, in addition to regional trade, through the year 2021. The 75-page report contains 36 figures and 11 tables.

Findings from this year’s Supply Report include:

  • North American capacity continues to increase with investments being made across all the processes and for a variety of end-uses. Production output exceeded that of new capacity, resulting in the industry’s nameplate capacity utilization increasing year-over-year, for the fourth consecutive year.
     
  • In 2021, capacity of nonwovens in North America reached 5.540 million tonnes, an increase from the previous year of 1.8% (net growth of 98,300 tonnes) and an improvement over the previous year’s pandemic-impacted growth rate of 0.5%.
     
  • The industry was able to quickly react to the demand for electrostatically charged fine-fiber meltblown used in the manufacture of respirators and pleated face masks. Twenty-two meltblown lines were added in 2020, resulting in 7.2% year-over-year growth rate for meltblown. In 2021, another 12 lines were added, resulting in 8.5% annual growth over 2020.
     
  • North American imports, in tonnage, increased 1.6% in 2021 as exports decreased 6.0%. Imports were led by China accounting for 39% of the imports into North America followed by India (14%) and Germany (9%). Even with the significant shifts in North American trade dynamics, nonwovens tend to stay where they are produced, with the net trade balance (imports less exports, 422,100 tonnes) accounting for less than ten percent of the region’s capacity

The report—and the quarterly INDA Market Pulse and monthly Price Trends Summary—are provided to the nearly 400 INDA member companies and associates as part of their membership. The data gathered for this annual report serves as the foundation for the both the biannual Global Nonwoven Market Report published in September of 2021 and the biannual North American Nonwovens Industry Outlook, which will be updated and published this fall.

Weitere Informationen:
nonwovens INDA
Quelle:

INDA

(c) Messe Frankfurt (HK) Ltd.
17.05.2022

Cinte Techtextil China to address personal hygiene and sustainability demands

With global consumers becoming more conscious about personal hygiene and environmental protection, exhibitors at Cinte Techtexil China will spotlight materials and technologies for products that respond to these trends. The fair will probe into the associated growth opportunities as the country is one of the leading markets for nonwovens and technical textiles. The event will be held from 6 – 8 September at the Shanghai New International Expo Centre.

The technical textiles and nonwovens industries, the latter notably, are significantly expanding amid the pandemic. A recent forecast[1] predicts that the global polypropylene nonwoven fabric market will continue to rise at a CAGR of 6.7%, reaching USD 39.23 billion by 2028. The anticipated growth is bolstered by demands in end-use industries such as sanitation, medical, automotive and more. In 2020, Asia Pacific was named the largest regional market in the world and is expected to grow significantly over the forecasted period.

With global consumers becoming more conscious about personal hygiene and environmental protection, exhibitors at Cinte Techtexil China will spotlight materials and technologies for products that respond to these trends. The fair will probe into the associated growth opportunities as the country is one of the leading markets for nonwovens and technical textiles. The event will be held from 6 – 8 September at the Shanghai New International Expo Centre.

The technical textiles and nonwovens industries, the latter notably, are significantly expanding amid the pandemic. A recent forecast[1] predicts that the global polypropylene nonwoven fabric market will continue to rise at a CAGR of 6.7%, reaching USD 39.23 billion by 2028. The anticipated growth is bolstered by demands in end-use industries such as sanitation, medical, automotive and more. In 2020, Asia Pacific was named the largest regional market in the world and is expected to grow significantly over the forecasted period.

The prediction reaffirms the growth prospects of nonwovens. In this regard, industry players expressed much optimism about associated future opportunities during Cinte Techtextil China last year. “The field of nonwovens is poised for a positive growth as the awareness of personal hygiene and pandemic prevention sustains in the domestic market,” commented Mr James Gao, Head of Marketing and Textile Technologies, Uster Technologies (China) Co Ltd. He added: “We decided to join the fair and showcase our new launches as we remain confident in the future development of the industry, especially since China is dominating the global scene.”

Going green is the way forward
Turning to yarns and fibres, the sector is shifting to greener and smarter production that echoes the trend towards sustainability that is gaining considerable traction across the globe. Meanwhile in China, this movement was observed by many exhibitors at the 2021 edition, including Mr Roberto Galante, Plant Manager of FMMG Technical Textiles (Suzhou) Co Ltd, the Chinese subsidiary of the Fil Man Made Group. He mentioned: “The market is paying more attention to environmental protection, and we receive enquiries about special yarns for this every day. We focus on technical yarns for filtration as well as anti-bacterial properties, which are very important for the environment. The potential here in China is incredible and this is a big opportunity for everybody.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span across a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw material providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

Quelle:

Messe Frankfurt (HK) Ltd

(c) DiloGroup
13.05.2022

DiloGroup auf der Techtextil mit Vliesstofftechnologie

Die DiloGroup informiert auf der Techtextil in Frankfurt (21. – 24.06.2022) über Neuentwicklungen, die Verbesserungen der Produktionstechnik mit Schwerpunkt Nadelvliesstoffe definieren.

Mehr und mehr zeigt sich, dass gerade die Textilwirtschaft in den strengen Fokus der Regulierungsbehörden gerät, die auf die Beachtung von Nachhaltigkeitsgrundsätzen drängen und Gesetzeswerke auf den Weg bringen. Demnach sind alle industriellen Branchen aufgerufen, Einsparungen im Sektor des Material- und Energieverbrauchs zu erreichen. Dabei spielt selbstverständlich der Textilmaschinenbau eine herausragende Rolle, indem er diese verschärften Anforderungen aufgreift und Lösungen anbietet für Faserstoffrecycling und die Reduktion des Verbrauchs von Strom, Wasser und Hilfsmitteln. Die DiloGroup unternimmt große Anstrengungen, zusammen mit einem Kreis von Partnerfirmen, diesen Herausforderungen zu entsprechen. Dabei sind mehrere Schwerpunkte in der Entwicklungsarbeit zu nennen:

Die DiloGroup informiert auf der Techtextil in Frankfurt (21. – 24.06.2022) über Neuentwicklungen, die Verbesserungen der Produktionstechnik mit Schwerpunkt Nadelvliesstoffe definieren.

Mehr und mehr zeigt sich, dass gerade die Textilwirtschaft in den strengen Fokus der Regulierungsbehörden gerät, die auf die Beachtung von Nachhaltigkeitsgrundsätzen drängen und Gesetzeswerke auf den Weg bringen. Demnach sind alle industriellen Branchen aufgerufen, Einsparungen im Sektor des Material- und Energieverbrauchs zu erreichen. Dabei spielt selbstverständlich der Textilmaschinenbau eine herausragende Rolle, indem er diese verschärften Anforderungen aufgreift und Lösungen anbietet für Faserstoffrecycling und die Reduktion des Verbrauchs von Strom, Wasser und Hilfsmitteln. Die DiloGroup unternimmt große Anstrengungen, zusammen mit einem Kreis von Partnerfirmen, diesen Herausforderungen zu entsprechen. Dabei sind mehrere Schwerpunkte in der Entwicklungsarbeit zu nennen:

  1. Intensivvernadelung
    Die Nadelvliestechnologie ist per se ein Herstellungsverfahren, das auf seiner mechanischen Basis eine hohe Energieeffizienz besitzt. Insoweit richten sich die Entwicklungsanstrengungen der DiloGroup darauf, mit Methoden der „Intensivvernadelung“ Vliesstoffe, statt mit Wasserstrahl, genadelt herzustellen und dies auch für Leichtvliesstoffe aus feinen Fasern für den Bereich Medizin und Hygiene im Flächengewichtsbereich 30 – 100 g/m². Durch die Vernadelung können die umweltrelevanten Kosten in der Produktion: Strom, Gas, Wasser pro Jahr auf ca. 1/3 bis 1/5 gesenkt werden.
    Abgesehen von den perspektivischen Vorzügen des mechanischen Intensivvernadelungs-Verfahrens gegenüber dem hydrodynamischen ist die Wasserstrahlverfestigung bei geringen Flächenmassen und höchsten Produktionsleistungen derzeit das bedeutendste Produktionsverfahren, das Dilo auch als Gesamtanlagenanbieter in Generalunternehmerschaft mit Partnern anbietet.
  2. „Faserstoff-Recycling“
    Fasermaterialien in Vliesstoffen und Bekleidungsabfällen können insbesondere dann erfolgreich wieder verwertet werden, je besser es gelingt im Reißprozess Stapellängen erhaltend zu arbeiten. In der klassischen Reißerei werden die Stapellängen stark eingekürzt und sind deshalb als Rohstoff nur noch für untergeordnete Zwecke der thermischen und akustischen Dämmung oder z. B. als Schutztextilien, Transportdecken, Malervliese etc. einsetzbar.
    Bei textilen Abfällen im Rahmen der Altkleiderverwertung ist das „fädige“ Reißen über besondere Reißmaschinen und –verfahren so einsetzbar, dass mit den wieder gewonnenen Fasern größerer Stapellänge natürlich auch Vliesstoffanlagen beschickt und damit Produktmerkmale besser spezifiziert und kontrolliert werden können.
  3. Additive Vliesstoffherstellung
    Das additive Herstellverfahren des „3D-Lofters“ ist insbesondere für Autoformteile mit unterschiedlich verteilten Massen geeignet; aber auch im Bereich der Kleidungs- und Schuhproduktion dürfte sich ein zunehmendes Einsatzpotential entwickeln.
  4. „IsoFeed“-Krempelspeisung
    Im Sektor der Krempelspeisung bildet das „IsoFeed“-Konzept ein großes Potential einer sehr viel gleichmäßigeren Krempelbeschickung, so dass gleichzeitig die Flormassenverteilung mit ihrer Variationsbreite eingeengt werden, und damit der Fasermaterialverbrauch, bei gleicher Qualität des Endproduktes, sinken kann.
Quelle:

DiloGroup

Mobiles Robotersystem zum automatisierten Bestücken eines Spulengatters (c) STFI
12.05.2022

STFI mit nachhaltigen und digitalen Innovationen auf der Techtextil 2022

Das Sächsische Textilforschungsinstitut e.V. zeigt auf der Techtextil 2022, der internationalen Messe für technische Textilien und Vliesstoffe, innovative Highlights aus Forschung und Entwicklung. Neben einer kettengewirkten textilen Fassadenbegrünung im Modulsystem und textilen Leichtbauelementen für den Baubereich aus Hanf als nachwachsendem Rohstoff präsentiert das STFI auch Neues aus der Vliesstoffforschung. Für die Vliesstoffkompetenz steht das Projekt optiformTEX, bei dem für die Halbzeugherstellung im Automobilsektor die Flächenmasse gezielt beeinflusst wurde. Des Weiteren stellt das Chemnitzer Institut eine ökologische Schaumbeschichtung für Schutztextilien aus. Zentrales Highlight des STFI-Messeauftritts ist darüber hinaus ein mobiles Robotersystem, das ein automatisiertes Bestücken eines Spulengatters im Kleinformat zeigt.

Das Sächsische Textilforschungsinstitut e.V. zeigt auf der Techtextil 2022, der internationalen Messe für technische Textilien und Vliesstoffe, innovative Highlights aus Forschung und Entwicklung. Neben einer kettengewirkten textilen Fassadenbegrünung im Modulsystem und textilen Leichtbauelementen für den Baubereich aus Hanf als nachwachsendem Rohstoff präsentiert das STFI auch Neues aus der Vliesstoffforschung. Für die Vliesstoffkompetenz steht das Projekt optiformTEX, bei dem für die Halbzeugherstellung im Automobilsektor die Flächenmasse gezielt beeinflusst wurde. Des Weiteren stellt das Chemnitzer Institut eine ökologische Schaumbeschichtung für Schutztextilien aus. Zentrales Highlight des STFI-Messeauftritts ist darüber hinaus ein mobiles Robotersystem, das ein automatisiertes Bestücken eines Spulengatters im Kleinformat zeigt.

Highlights auf der Techtextil 2022
Die begrünte Fassadenkachel ist ein System, mit dem durch einen einfachen, modularen Segmentaufbau großflächige Gebäudeflächen kostengünstig begrünt werden können. Neben einer Gebäudedämmung soll das System den gestalterischen Ansprüchen einer modernen Innenstadt entsprechen. Durch eine Funktionsintegration in die textile Trägerschicht und abgestimmte Pflanzenauswahl wird eine wartungsarme Begrünung möglich.

Formbauteile aus Vliesstoffen kommen zunehmend im Automobilbereich zum Einsatz. Konventionelle Vliesstoffe haben aktuell gleichmäßige Flächenmassen. Technische Lösungen zur lastgerechten Bauteilverstärkung und der daraus resultierende optimierte Materialeinsatz stellen ein enormes wirtschaftliches Potenzial dar. Die Grundidee von „optiformTEX“ war daher die Flächenmassenverteilung im Flor vor der Halbzeugverfestigung gezielt zu beeinflussen. Im Ergebnis wurde ein textiltechnologisches Verfahren und die zugehörige Anlagenkomponente erfolgreich entwickelt, die sowohl für synthetische als auch für Naturfaserstoffe geeignet sind.

Zukunftsweisende Materialien bieten Entwicklungen aus dem Bereich nachwachsender Rohstoffe in Kombination mit biobasierten Harzsystemen: im Projekt „Gro-Coce“ wurde durch die Verbindung nachhaltiger Bauprodukte und -weisen ein innovatives Deckensystem entwickelt. Gegenwärtig entwickelt das Projektteam ein hochleistungsfähiges Hanfbasthalbzeug sowie die Schritte zu dessen reproduzierbare Herstellung mittels textiler Flächenbildung. Erste Applikations- und Belastungstests der Hanfbasthalbzeuge an Holzbalken konnten das hohe Leistungspotenzial der Naturfasermaterialien bestätigen.

Spezielle Funktionstextilien basieren auf Verbundmaterialien mit Beschichtungen oder Membranen. Die bisherige Herstellung der Beschichtungen/Membranen birgt häufig ökologische und gesundheitliche Risiken. Am STFI wurden daher lösemittelfreie, rein wässrige Beschichtungssysteme sowie eine Technologie zu deren Applikation für den Schutztextilbereich entwickelt, woraus eine atmungsaktive, wasserdichte und waschpermanente Textilbeschichtung resultiert.

Zentrales Highlight des STFI-Messeauftritts ist ein mobiles Robotersystem, das automatisiertes Bestü-cken eines Spulengatters im Kleinformat zeigt. Der Roboter ist am STFI Teil der „Textilfabrik der Zukunft“, in welcher eine Spielmatte gewebt und Schritt für Schritt entlang der textilen Kette weiterverarbeitet wird.

Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™ (c) INDA
IDEA22 Ribbon Cutting
06.04.2022

IDEA® Achievement Award honorees

  • Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™

Approximately 5,000 participants embraced the opportunity to again engage in face-to-face business meetings with global leaders in nonwovens and engineered materials at IDEA® 2022 in Miami Beach, Fla., co-located with the second FiltXPO™,  North American’s only exhibition and conference dedicated exclusively to filtration and separation.

Industry participants at IDEA® 2022,  the 21 st edition of the world’s preeminent event for nonwovens and engineered fabric professionals, expressed their business confidence through the floor exhibits and the return to face-to-face business interaction. Scott Beir, Executive Officer, CFM Global, called IDEA® 2022 “an exceptional show.”

Bob Usher, Technical Director, US Fibers, added that his company made valuable business connections. According to Rolk Kammermann, Head of Sales and Marketing, Innovative Swiss Made Nonwovens, “the size and scope of IDEA and FiltXPO have been excellent for us as both exhibitors and as visitors.”

  • Participants Embrace Renewed Face-to-Face Business with Global Leaders in Nonwovens & Engineered Materials at IDEA® 2022 and FiltXPO™

Approximately 5,000 participants embraced the opportunity to again engage in face-to-face business meetings with global leaders in nonwovens and engineered materials at IDEA® 2022 in Miami Beach, Fla., co-located with the second FiltXPO™,  North American’s only exhibition and conference dedicated exclusively to filtration and separation.

Industry participants at IDEA® 2022,  the 21 st edition of the world’s preeminent event for nonwovens and engineered fabric professionals, expressed their business confidence through the floor exhibits and the return to face-to-face business interaction. Scott Beir, Executive Officer, CFM Global, called IDEA® 2022 “an exceptional show.”

Bob Usher, Technical Director, US Fibers, added that his company made valuable business connections. According to Rolk Kammermann, Head of Sales and Marketing, Innovative Swiss Made Nonwovens, “the size and scope of IDEA and FiltXPO have been excellent for us as both exhibitors and as visitors.”

Organized by INDA, IDEA® also featured five essential nonwovens training classes; market presentations from China, Asia, Europe, North America and South America; industry recognitions with the IDEA® Achievement Awards and the IDEA® Lifetime Achievement Awards; and a welcome reception celebration.

Also, organized by INDA, FiltXPO™ featured five panels of global leaders in filtration and separation for the first-ever “Summit for Global Change,” discussing societal challenges such as indoor air quality, environmental sustainability, pandemic readiness, clean water, and filtration standards.  The event also featured a 1.5-day filter media training course, and sessions highlighting filter media market trends and filtration industry statistics.  

Exhibitors and attendees noted the welcome return to meeting face-to-face among industry senior leaders participating in the three-day event.

A highlight of IDEA® was the announcement of the IDEA® Achievement Awards by INDA, in partnership with Nonwovens Industry magazine. Moderated by Rousse and Karen McIntyre, Editor, Nonwovens Industry the awards recognize the leading introductions in equipment, raw materials, short-life, long-life and nonwovens products, and sustainability, since the previous IDEA® Exposition in 2019.

In addition, INDA presented the IDEA® 2022 Lifetime Achievement Award to Val Hollingsworth, board chair and CEO of Hollingsworth & Vose, and Nonwovens Industry presented the IDEA® Entrepreneur Achievement Award to Doug Brown, president of Biax-Fiberfilm/5K Fibres at the event.

IDEA® 2022 Achievement Awards winners:

  • IDEA®  Equipment Achievement Award – Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics, Inc.
  • IDEA®  Raw Material Achievement Award – ODOGard – Rem Brands, Inc.
  • IDEA® Short-Life Product Achievement Award – LifeSavers Wipes – LifeSavers LLC
  • IDEA® Long-Life Product Achievement Award – Nanofiber Cabin Air Filter – MANN + HUMMEL GmbH
  • IDEA®  Sustainability Advancement Award – Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
  • IDEA®  Nonwoven Product Achievement Award – HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
  • IDEA®, the Preeminent Event for the Nonwovens & Engineered Fabrics Industry, will next be held on its new 24-month schedule on April 23-25, 2024 in Miami Beach, Florida.

 

Names of the IDEA® Achievement Award honorees pictured:

Row 1, Left to right:
IDEA® Long-Life Product Achievement Award winner, Jon Nichols, MANN + HUMMEL, GmbH and Dave Rousse – Nanofiber Cabin Air Filter – MANN + HUMMEL, GmbH
IDEA®  Nonwoven Product Achievement Award winners, Pramod Shanbhag, Suominen Corporation, Karen McIntyre, Nonwovens Industry Magazine, and Avinav Nandgaonkar, HYDRASPUN® Aquaflo – Sustainable Nonwoven Substrates – Suominen Corporation
Row 2, left to right:
IDEA® Short-Life Product Achievement Award winner, Georgia Crawford, LifeSavers Wipes – LifeSavers LLC, and Karen McIntyre, Nonwovens Industry Magazine
IDEA® 2022 Lifetime Achievement Award winner, Val Hollingsworth, Hollingsworth & Vose, and Dave Rousse, President, INDA
IDEA®  Equipment Achievement Award winners, Uwe Peregi, Dave Rousse, and Thomas Herrmann – Elastic Thread Anchoring (ETA) Sonotrode – Herrmann Ultrasonics Inc.
Row 3, left to right:
IDEA®  Raw Material Achievement Award winner, David Schneider, ODOGard – Rem Brands, Inc. and Dave Rousse, INDA
IDEA®  Sustainability Advancement Award winner, Chris Astley, and Karen McIntyre Fiber-based Screw Caps – Glatfelter Corp. and Blue Ocean Closures
IDEA® Entrepreneur Achievement Award winner, Doug Brown, Biax-Fiberfilm / 5K Fibres

30.03.2022

Suominen launches BIOLACE® Zero, its first carbon neutral nonwoven

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is an excellent product for many kinds of wiping applications like baby, personal care, and household wipes. It has excellent wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is an excellent product for many kinds of wiping applications like baby, personal care, and household wipes. It has excellent wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen’s BIOLACE® Zero and Lenzing’s VEOCEL™ Lyocell fibers are certified as carbon neutral products by globally recognized company, ClimatePartner. Carbon neutrality means that the greenhouse gas emissions of nonwoven have been calculated – from the raw material production to the client’s production facility – reduced and are offset through certified carbon offset projects.

Suominen is a pioneer in sustainable nonwovens and we have a wide range of sustainable nonwoven products for different applications. Suominen’s R&D team has excellent know-how on sustainable fibers and we are also continuously collaborating with innovative partners to develop new and innovative solutions with a reduced environmental impact into our product portfolio.

“With this new carbon neutral product BIOLACE® Zero we are able to support our customers in their greenhouse gas emissions reduction targets. Innovating new products in collaboration with partners such as Lenzing by using carbon neutral VEOCEL™ Lyocell fibers is well aligned with our strategy and vision to be the frontrunner in sustainable nonwovens”, says Noora Rantanen, Manager, Sustainability & Marketing.

Quelle:

GlobeNewswire

29.03.2022

Suominen launches its first carbon neutral nonwoven

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is suitable for many kinds of wiping applications like baby, personal care, and household wipes. It has wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen launches a carbon neutral nonwoven, BIOLACE® Zero. BIOLACE® Zero is suitable for many kinds of wiping applications like baby, personal care, and household wipes. It has wet and dry strength and it’s very soft. It is made of 100% cellulosic lyocell fibers and the product is 100% biodegradable, compostable and plastic free.

BIOLACE® Zero utilizes VEOCEL™ Lyocell fibers from Suominen´s long-term partner Lenzing. BIOLACE® Zero is made of 100% carbon neutral VEOCEL™ Lyocell fibers.

“We are very excited to introduce BIOLACE® Zero, which is not just Suominen´s first carbon neutral product, but also one of the first carbon neutral nonwovens on the market. BIOLACE® Zero will be available as part of Suominen's sustainable product portfolio”, says Marika Mäkilä, Senior Manager, Category Management, Europe.

Suominen’s BIOLACE® Zero and Lenzing’s VEOCEL™ Lyocell fibers are certified as carbon neutral products by globally recognized company, ClimatePartner. Carbon neutrality means that the greenhouse gas emissions of nonwoven have been calculated – from the raw material production to the client’s production facility – reduced and are offset through certified carbon offset projects.

“With this new carbon neutral product BIOLACE® Zero we are able to support our customers in their greenhouse gas emissions reduction targets. Innovating new products in collaboration with partners such as Lenzing by using carbon neutral VEOCEL™ Lyocell fibers is well aligned with our strategy and vision to be the frontrunner in sustainable nonwovens”, says Noora Rantanen, Manager, Sustainability & Marketing.

Weitere Informationen:
Suominen nonwovens Lenzing Group
Quelle:

Suominen

PHD Marketing Ltd.
North Carolina neighbors Avgol America Inc. and YanJan LLC will be working together on the new project
17.03.2022

Avgol® and YanJan: commercial partnership for North American apertured spunbond project

Avgol® America Inc., a North American leader in the manufacture of high-performance nonwoven fabric solutions, and YanJan USA LLC, the professional material supplier for disposable hygiene products, have announced a new partnership to deliver exclusive product offerings to the North American market.

Under the terms of the new partnership, Avgol will be offering apertured spunbond products made exclusively by YanJan USA using its specific know-how and capabilities. YanJan USA will obtain the base spunbond materials exclusively from Avgol, with the partners developing and manufacturing products tailored to each company’s skill set and to meet customer needs.

“This partnership enables both YanJan and Avgol to diversify our overall product ranges and to push effectively into new market opportunities,” said Jian Weng, President and General Manager of YanJan USA LLC.

Avgol® America Inc., a North American leader in the manufacture of high-performance nonwoven fabric solutions, and YanJan USA LLC, the professional material supplier for disposable hygiene products, have announced a new partnership to deliver exclusive product offerings to the North American market.

Under the terms of the new partnership, Avgol will be offering apertured spunbond products made exclusively by YanJan USA using its specific know-how and capabilities. YanJan USA will obtain the base spunbond materials exclusively from Avgol, with the partners developing and manufacturing products tailored to each company’s skill set and to meet customer needs.

“This partnership enables both YanJan and Avgol to diversify our overall product ranges and to push effectively into new market opportunities,” said Jian Weng, President and General Manager of YanJan USA LLC.

“This is in an exciting partnership for our companies,” said Ronnie Batchler, VP Americas Region at Avgol. “The spunbond ‘precursor’ material will be specifically designed to meet customer specifications and deliver optimum perfomance. Aperturing of the spunbond will then give the nonwoven material additional unique attributes, such as improved physical performance and aesthetic appeal.

Weitere Informationen:
nonwovens Avgol YanJan
Quelle:

PHD Marketing Ltd.

14.03.2022

IDEA®22 Essentials of Nonwovens Training Courses

  • IDEA22 Training: Nonwovens’ premier industry-focused learning opportunities!

IDEA®22 is just days away – but it’s not too late to register to attend, or to sign up to take INDA’s Essentials of Nonwovens training courses. Become fully immersed in the world of nonwovens with courses that will bring you up-to-the-minute on technologies, industry segments and more. Learn face-to-face, in a forum where you can ask questions and meet new colleagues. For product developers, marketing managers, technical sales or support professionals – the Essential series lives up to its name.

Essentials of nonwovens courses at IDEA®22

  • Absorbent Hygienie Cores
  • Making Nonwovens
  • Industrial Wipes
  • Consumer Wet Wipes
  • IDEA22 Training: Nonwovens’ premier industry-focused learning opportunities!

IDEA®22 is just days away – but it’s not too late to register to attend, or to sign up to take INDA’s Essentials of Nonwovens training courses. Become fully immersed in the world of nonwovens with courses that will bring you up-to-the-minute on technologies, industry segments and more. Learn face-to-face, in a forum where you can ask questions and meet new colleagues. For product developers, marketing managers, technical sales or support professionals – the Essential series lives up to its name.

Essentials of nonwovens courses at IDEA®22

  • Absorbent Hygienie Cores
  • Making Nonwovens
  • Industrial Wipes
  • Consumer Wet Wipes
Quelle:

INDA

ANDRITZ liefert eine neue Vliesbildungslinie für Nähwirkprozesse bei Romatex, Kapstadt , Südafrika © ANDRITZ
ANDRITZ-Kreuzleger PRO 25-90
02.03.2022

ANDRITZ-Vliesbildungslinie in Betrieb bei Romatex

  • ANDRITZ liefert eine neue Vliesbildungslinie für Nähwirkprozesse bei Romatex, Kapstadt , Südafrika

Der internationale Technologiekonzern ANDRITZ erhielt von Romatex (Pty) Ltd., Südafrika, den Auftrag zur Lieferung einer neuen Vliesbildungslinie. Die Linie wird bei der Produktion von Maliwatt-Produkten eingesetzt, die in einem breiten Anwendungsspektrum einschließlich Heimtextilien verwendet werden. Die Inbetriebnahme der Linie ist im vierten Quartal 2022 vorgesehen.

ANDRITZ wird spezielle Vliesbildungsausrüstungen mit einer Kombination von aXcess-Krempel mit eXcelle Kreuzleger liefern, um die von Romatex benötigten technischen Eigenschaften hinsichtlich Produktqualität und Leistung der Produktionslinie zu erreichen. Mit dieser neuen Nähwirklinie wird Romatex die steigenden Kundenanforderungen hinsichtlich Verfügbarkeit von hochwertigen Produkten erfüllen können.

  • ANDRITZ liefert eine neue Vliesbildungslinie für Nähwirkprozesse bei Romatex, Kapstadt , Südafrika

Der internationale Technologiekonzern ANDRITZ erhielt von Romatex (Pty) Ltd., Südafrika, den Auftrag zur Lieferung einer neuen Vliesbildungslinie. Die Linie wird bei der Produktion von Maliwatt-Produkten eingesetzt, die in einem breiten Anwendungsspektrum einschließlich Heimtextilien verwendet werden. Die Inbetriebnahme der Linie ist im vierten Quartal 2022 vorgesehen.

ANDRITZ wird spezielle Vliesbildungsausrüstungen mit einer Kombination von aXcess-Krempel mit eXcelle Kreuzleger liefern, um die von Romatex benötigten technischen Eigenschaften hinsichtlich Produktqualität und Leistung der Produktionslinie zu erreichen. Mit dieser neuen Nähwirklinie wird Romatex die steigenden Kundenanforderungen hinsichtlich Verfügbarkeit von hochwertigen Produkten erfüllen können.

Dies ist bereits die dritte von ANDRITZ an Romatex gelieferte Linie innerhalb von vier Jahren. Helmut Höck, Betriebsdirektor bei Romatex, sagt: Wir haben 2017 unsere erste ANDRITZ-Linie und eine weitere im Jahr 2019 gekauft. Wir waren mit der engen Zusammenarbeit zwischen unseren Unternehmen, der Flexibilität und Verlässlichkeit der Maschinen sowie der ausgezeichneten Servicebetreuung in all den Jahren sehr zufrieden. Es war alles sehr unkompliziert. Daher hatten wir das Vertrauen, ANDRITZ bei einer weiteren Investition in Betracht zu ziehen.

ANDRITZ zählt zu den globalen Marktführern bei der Lieferung von Vliesstofftechnologien, darunter Vliesbildungsmaschinen für Nähwirkverfahren, die bei der Herstellung von Maliwatt, Malivlies und Multiknit eingesetzt werden. Dieses Segment befasst sich mit verschiedenen Anwendungen, darunter die Automobilindustrie, der Haushaltsbereich, Bettwäsche, Schuhe, Feuchttücher und vieles mehr.

Romatex ist das führende Unternehmen für Maliwatt Nähwirkprozesse in Afrika. Seine Produktionsstätte befindet sich in Kapstadt. Eine der wichtigsten Stärken des Unternehmens ist dessen Produktdiversifizierung. Heute bietet das Unternehmen eine vollständige Auswahl an Bettwäschen, Decken, Pölstern und Nähwirkprodukten an.

Weitere Informationen:
Andritz Vliesstoffe
Quelle:

ANDRITZ-GRUPPE