Aus der Branche

Zurücksetzen
12 Ergebnisse
Baldwin presents spray finishing system at Techtexil (c) Baldwin Technology Company Inc.
13.03.2024

Baldwin presents spray finishing system at Techtexil

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

Baldwin Technology Co. will join Elmatex GmbH at Techtexil (April 23-26 in Frankfurt, Germany) to demonstrate its TexCoat™ G4 precision spray finishing system.

With Baldwin’s system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.
 
Furthermore, the system offers automated speed tracking, fabric-width compensation, and real-time monitoring to track system uptime, performance and chemistry usage, as well as active care alerts.
 
In addition, the TexCoat™ G4 system can process a wide range of low-viscosity water-based chemicals, such as durable water repellents, softeners, antimicrobials, flame retardants and more. Baldwin’s technology utilizes the same chemicals used in the traditional pad bath, and no special auxiliaries are required. The recipe is adjusted by increasing the concentration and reducing the pickup by a corresponding amount, so that the same level of solids is applied.
 
Some applications, such as durable water repellents, are only applied on the face of the fabric, instead of the traditional method of saturation through dipping and squeezing. Drier fabric entering the stenter means lower drying temperatures and faster process speeds. Single-side applications also open up the opportunity to process back-coated or laminated fabrics in a single pass of the stenter, instead of two passes.

Quelle:

Baldwin Technology Company Inc.

Devan high cooling Photo: Devan Chemicals
09.01.2024

Devan Chemicals presents latest sustainable textile finishes at Heimtextil 2024

Devan will showcase the newest additions to their R-Vital NTL Range and Thermic High Cooling technology.

R-Vital® NTL enables textile manufacturers to boost their textiles with a range of active, natural ingredients that have a positive effect on the body and mind. Elements such as Chamomile oil and Arnica Montana are absorbed by the skin and have relaxing, moisturizing or hydrating effects. The biobased content of the R-Vital well-being technology is +97%, readily biodegradable (OECD 301B).

R-Vital® NTL Regenight™: Devan and Lucas Meyer Cosmetics join forces to launch a ground-breaking technology, R-Vital NTL Regenight™, a technology which improves sleep quality and also improves nighttime skin recovery. Using an upcycled oil soluble fraction obtained from Australian Tea tree oil distillation process, Regenight™ acts through both inhalation to improve nighttime rest and through topical action to provide skin recovery.

Tested in real-life context using proven biometric technology, the dual action provided individually by Regenight™ proposes a breakthrough approach to reduce the impact of poor-quality sleep on the skin.

Devan will showcase the newest additions to their R-Vital NTL Range and Thermic High Cooling technology.

R-Vital® NTL enables textile manufacturers to boost their textiles with a range of active, natural ingredients that have a positive effect on the body and mind. Elements such as Chamomile oil and Arnica Montana are absorbed by the skin and have relaxing, moisturizing or hydrating effects. The biobased content of the R-Vital well-being technology is +97%, readily biodegradable (OECD 301B).

R-Vital® NTL Regenight™: Devan and Lucas Meyer Cosmetics join forces to launch a ground-breaking technology, R-Vital NTL Regenight™, a technology which improves sleep quality and also improves nighttime skin recovery. Using an upcycled oil soluble fraction obtained from Australian Tea tree oil distillation process, Regenight™ acts through both inhalation to improve nighttime rest and through topical action to provide skin recovery.

Tested in real-life context using proven biometric technology, the dual action provided individually by Regenight™ proposes a breakthrough approach to reduce the impact of poor-quality sleep on the skin.

R-Vital® NTL Chamomile oil: Chamomile oil is known for its moisturizing and soothing properties. Additionally, this oil is believed to have antioxidant and inflammatory properties. Furthermore, chamomile oil is renowned for its calming effects and potential to reduce stress and anxiety, helping improve sleep quality.

R-Vital® NTL Warming: Engineered to deliver a gentle warmth, the R-Vital NTL Warming technology ensures a cozy and comfortable sleeping experience. This blend is a solution that infuses a sense of warmth, promoting physical and emotional well-being.

R-Vital NTL Arnica Montana: Harnessing the natural benefits of Arnica Montana, this ingredient, is celebrated for its potent healing and recovering properties.

At Heimtextil Devan will also present a new high cooling technology that provides an optimal and refreshing sleeping climate, ensuring a cool and restful night's sleep. Thermic High Cooling is based on reactive microencapsulated Phase Change Materials (PCMs). The smart heat exchange mechanism keeps the body within its comfort zone. This makes the body suffer less from night sweats, and results in a longer, healthier and more comfortable sleep with fewer awakenings. This new formulation with high cooling level and high solid content, presents around 30% more cooling than standard PCM formulations. One padding allows to achieve high cooling level (no need to run multiple applications). A Bio-based version is also available - Thermic® Bio, where the PCMs are derived from sustainable, natural sources.

Quelle:

Devan Chemicals

06.11.2023

Mahlo präsentiert neue Lösungen auf der ITMA Asia 2023

Mahlo GmbH + Co. KG präsentiert zusammen mit Shanghai Kuantex auf der ITMA Asia (19. und 23. November) ihre Systeme und Lösungen für eine effiziente und qualitativ hochwertige Textilproduktion und -veredlung. Im Fokus steht dabei das neue Richtkonzept, Orthopac RXVMC, des Maschinenbauers.

„Beim neuen Richtkonzept wurde besonderes Augenmerk auf die Richtmechanik und deren Zusammenspiel mit der Analyseelektronik des Tastkopfsystems gelegt“, erklärt Vertriebsleiter Thomas Höpfl. Neu ist auch das Ansteuerungskonzept. Eine Tastkopfgruppe am Einlauf der Richtmaschine erkennt Verzüge, noch bevor Sie die Korrekturwalzen erreichen. So werden die Walzen direkt in Position gebracht und die Ware bereits ab dem ersten Zentimeter korrigiert. Eine Tastkopfgruppe am Auslauf erkennt zusätzlich möglichen Restverzug, der den am zweiten Richtmodul korrigiert wird. Das ermöglicht eine noch präzisere und schnellere Reaktion, wenn es gilt auf schnell wechselnde Verzügen zu reagieren. Seine volle Stärke zeigt das Orthopac RXVMC daher beim Richten von Maschenwaren und verzugsempfindlichen Geweben.

Mahlo GmbH + Co. KG präsentiert zusammen mit Shanghai Kuantex auf der ITMA Asia (19. und 23. November) ihre Systeme und Lösungen für eine effiziente und qualitativ hochwertige Textilproduktion und -veredlung. Im Fokus steht dabei das neue Richtkonzept, Orthopac RXVMC, des Maschinenbauers.

„Beim neuen Richtkonzept wurde besonderes Augenmerk auf die Richtmechanik und deren Zusammenspiel mit der Analyseelektronik des Tastkopfsystems gelegt“, erklärt Vertriebsleiter Thomas Höpfl. Neu ist auch das Ansteuerungskonzept. Eine Tastkopfgruppe am Einlauf der Richtmaschine erkennt Verzüge, noch bevor Sie die Korrekturwalzen erreichen. So werden die Walzen direkt in Position gebracht und die Ware bereits ab dem ersten Zentimeter korrigiert. Eine Tastkopfgruppe am Auslauf erkennt zusätzlich möglichen Restverzug, der den am zweiten Richtmodul korrigiert wird. Das ermöglicht eine noch präzisere und schnellere Reaktion, wenn es gilt auf schnell wechselnde Verzügen zu reagieren. Seine volle Stärke zeigt das Orthopac RXVMC daher beim Richten von Maschenwaren und verzugsempfindlichen Geweben.

Zur hochwertigen Textilherstellung und Veredlung trägt auch das Famacont PMC zur Regelung von Schussfaden- und Maschenreihendichte bei, das auf der ITMA Asia ebenfalls zu sehen ist. Das Famacont PMC-15 misst mittels Sensor die Faden- bzw Maschendichte und vergleicht sie mit dem in der Rezeptdatenverwaltung hinterlegtem Sollwert. Die erkannte Abweichung der Fadendichte vom Sollwert wird genutzt, um die Voreilung beim Aufnadelprozess am Spannrahmen vollautomatisch zu regeln. Interessierte können sich die Funktionsweise am Mahlo-Stand mit Hilfe eines Demo-Towers und eigener oder zur Verfügung gestellter Stoffproben erklären lassen.

Weiter großes Thema bleibt die Industry 4.0. Denn die besten gemessen Daten nützen nichts, wenn sie nicht verwertet werden können. Mahlo hat seine digitale Umgebung mSmart kontinuierlich weiterentwickelt. „Unsere Systeme generieren Daten, die der Kunde sofort nutzen kann, um Ware on-line zu regeln. Gleichzeitig werden alle Messwerte in unserem Datenmanagementsystem mLog enhanced gesichert und sind jederzeit abrufbar. Mit diesen historischen Daten können Prozesse optimiert und Schwachstellen im Ablauf zu minimiert werden“, erklärt Vertriebsleiter Thomas Höpfl.

Quelle:

Mahlo GmbH + Co. KG

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System (c) Baldwin Technology Company Inc.
06.11.2023

Baldwin at ITMA Asia 2023 with Precision Spray TexCoat™ System

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

Baldwin Technology Company Inc. will showcase its TexCoat™ G4 precision spray finishing system at ITMA Asia 2023 (November 19-23, National Exhibition and Convention Center, Shanghai). ITMA Asia participants can stop by and see Baldwin’s wide array of TexCoat G4-applied fabric samples from textile mills around the world and experience what precision finishing feels like while learning how the technology eliminates chemistry waste on changeover, saves water, and achieves faster speeds through the stenter frame and relaxed dryer.
 
Baldwin’s team will be available to discuss how the company’s technology can meet the textile supply chain’s sustainability and carbon footprint goals while improving performance and saving money. In the context of a cost-sensitive global economy and an increased focus by brands, consumers and regulatory agencies on sustainability, customers are placing a premium on sustainability-advantage textile production.

TexCoat G4’s non-contact spray technology offers numerous advantages compared to outdated finishing-chemistry application methods. TexCoat G4 processes a wide range of low-viscosity water-based chemicals, such as durable water-repellents –  including PFAS-free, softeners, anti-microbials, easy-care and flame retardants. The company's technology uses the same chemicals as found in traditional pad baths with no special auxiliaries required.

Testimonial videos from Pincroft Dyeing and Print Works and Graniteville Specialty Fabrics along with a video highlighting Baldwin’s partnership with North Carolina State University will also be screened at their stand.

Quelle:

Baldwin Technology Company Inc.

(c) Schoeller Textil AG
05.10.2023

Schoeller Textil präsentiert FLEX SHIELD Kollektion auf der A+A

Moderne Lebensstile erfordern mehr als nur funktionelle Bekleidung. Die FLEX SHIELD Kollektion bietet eine Palette von Textilien, die Schutz und Komfort bieten und ein Trageerlebnis auf hohem Niveau bieten, ohne die Bewegungsfreiheit einzuschränken

Die Flex Shield Kollektion spiegelt Schoeller’s Engagement wider, Textilien zu schaffen, die Personen zu außergewöhnlichen Leistungen befähigen. Dabei können sie ihre Aktivitäten mit dem Wissen ausleben, dass sie sich auf ihre Ausrüstung verlassen können, die spezifisch für anspruchsvolle Bedingungen konzipiert ist.

Jeder Artikel in der Kollektion ist mit mindestens einer von Schoeller’s innovativen Textiltechnologien ausgestattet. Diese Innovationen gewährleisten Atmungsaktivität, thermische Regulierung sowie Wind- und Wasserabweisung.

Moderne Lebensstile erfordern mehr als nur funktionelle Bekleidung. Die FLEX SHIELD Kollektion bietet eine Palette von Textilien, die Schutz und Komfort bieten und ein Trageerlebnis auf hohem Niveau bieten, ohne die Bewegungsfreiheit einzuschränken

Die Flex Shield Kollektion spiegelt Schoeller’s Engagement wider, Textilien zu schaffen, die Personen zu außergewöhnlichen Leistungen befähigen. Dabei können sie ihre Aktivitäten mit dem Wissen ausleben, dass sie sich auf ihre Ausrüstung verlassen können, die spezifisch für anspruchsvolle Bedingungen konzipiert ist.

Jeder Artikel in der Kollektion ist mit mindestens einer von Schoeller’s innovativen Textiltechnologien ausgestattet. Diese Innovationen gewährleisten Atmungsaktivität, thermische Regulierung sowie Wind- und Wasserabweisung.

Besonders interessant ist die schoeller®-ceraspaceTM Technologie, die ihre Schutzeigenschaften einer Zusammensetzung von speziellen Keramikpartikeln verdankt, die in einer Polymermatrix verankert sind. Die Keramikpartikel sind nahezu so hart wie Diamanten und als 3-dimensionale Beschichtung fest mit dem Textil verbunden. Ein Textil mit schoeller®-ceraspaceTM weist in Bezug auf Abriebfestigkeit signifikant bessere Leistungen auf als hochwertiges Leder. Bei einem mit schoeller®-ceraspaceTM ausgestatteten Gewebe kann während des Entwicklungsprozesses exakt definiert werden, welche Stretch-Eigenschaften das Endprodukt haben soll. Ein weiterer Vorteil ist die wesentlich geringere Menge von Abfallmaterial, die beim Herstellungsprozess entsteht im Vergleich zu Lederproduktion.

Weitere Informationen:
Schoeller Textil AG A+A Textilveredlung
Quelle:

Schoeller Textil AG

02.12.2022

Baldwin presents sustainable TexCoat G4 Finishing System at Igatex Pakistan

Baldwin Technology Company Inc. announced that Igatex Pakistan will officially kick off its new partnership with long-established Pakistan textile technology agent Al Ameen Trading Corporation. Representatives from both companies will team up to demonstrate Baldwin’s highly sustainable TexCoat™ G4 finishing system.

Igatex, the International Exhibition for Garment, Textile Machinery and Accessories, takes place December 1-4 at the Expo Centre in Lahore. Baldwin and Al Ameen will demonstrate TexCoat G4 and provide details on Baldwin’s Plasma Pure corona treatment as well as TexMoister G2™ remoistening systems technologies.

Baldwin Technology Company Inc. announced that Igatex Pakistan will officially kick off its new partnership with long-established Pakistan textile technology agent Al Ameen Trading Corporation. Representatives from both companies will team up to demonstrate Baldwin’s highly sustainable TexCoat™ G4 finishing system.

Igatex, the International Exhibition for Garment, Textile Machinery and Accessories, takes place December 1-4 at the Expo Centre in Lahore. Baldwin and Al Ameen will demonstrate TexCoat G4 and provide details on Baldwin’s Plasma Pure corona treatment as well as TexMoister G2™ remoistening systems technologies.

Baldwin’s TexCoat G4 non-contact precision-spray technology helps textile finishers up their game by enabling consistent, high-quality finishing, with zero chemistry waste and drastically minimized water and energy consumption. With Baldwin’s innovative system, the chemistry is precisely distributed across the textile surface and is applied only where it is required, on one or both sides of the fabric. The non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Plus, pad bath contamination is eliminated, and changeovers are only required when there is a change of finish chemistry.

Quelle:

Baldwin Technology Company Inc.

18.11.2022

Monforts at Igatex 2022

Monforts will be presenting its finishing technologies at the forthcoming Igatex textile machinery exhibition, which takes place from December 1-4 at the Lahore Expo Centre in Pakistan.

The importance of the textile industry to Pakistan’s economy cannot be overstated – it accounts for 60% of the country’s overall exports and some of its industry’s players are very major employers. In the year to June 2022, Pakistan’s textile exports climbed by 25% to a record value of $19.3 billion according to the country’s Bureau of Statistics, as security of deliveries – especially to Europe and the USA – worked in the country’s favour, in the light of the Covid-19 pandemic and subsequent supply chain issues. It has a key role to play in quickly getting the country back on its feet after the devastation.

Monforts will be presenting its finishing technologies at the forthcoming Igatex textile machinery exhibition, which takes place from December 1-4 at the Lahore Expo Centre in Pakistan.

The importance of the textile industry to Pakistan’s economy cannot be overstated – it accounts for 60% of the country’s overall exports and some of its industry’s players are very major employers. In the year to June 2022, Pakistan’s textile exports climbed by 25% to a record value of $19.3 billion according to the country’s Bureau of Statistics, as security of deliveries – especially to Europe and the USA – worked in the country’s favour, in the light of the Covid-19 pandemic and subsequent supply chain issues. It has a key role to play in quickly getting the country back on its feet after the devastation.

Monforts customers in the regions around the country’s three biggest cities of Karachi, Lahore and Faisalbad include all of the main players in the fields of home textiles and denim production, including Afroze, , Al Karam Artistic Milliners, Azgard-9, Crestex, , Gul Ahmed, Interloop, Liberty Mills, Lucky Textile Mills, Mustaqim, Naveena (NDL), Rajby Industries, Sapphire Finishing, Soorty, Style Textile and US Denim.

These companies rely on established Monforts technologies including Montex stentering equipment, Monfortex sanforizing units and Thermex dyeing ranges. The company’s Matex Eco Applicator minimum application system has also proved a big hit in recent years.

Monforts has also achieved considerable success in Pakistan with its Econtrol®* dyeing system  – an effective and established dyeing process. More than 40 Thermex continuous dyeing ranges have been installed in Pakistan in recent years and operator training on the Econtrol®* process by sophisticated technologists is an additional service.

The Econtrol® pad-dry process has a number of immediate benefits. Compared to the common pad-dry-pad-steam process, no salt is used and no steamer is required for a separate fixation step. Compared to the pad-dry-thermofix process, no urea is used and no smoke or deposits are generated, and unlike with the cold pad batch process, direct feedback of the dyeing results ensures no batching time is necessary and guarantees good reproducibility from the lab to bulk production.

An immediate wash off is also unnecessary, allowing for flexible production planning. The process is suitable for pale to dark shades with very good fastness properties. Also waste water treatment is improved by this technology.

*Econtrol is a registered mark of Dystar Colours Distribution GmbH.

Quelle:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

Photo: Archroma
09.06.2022

Archroma at Techtextil 2022 with latest innovations and system solutions

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

  • CLEAN AIR, a mineral air purification system that stays put on all kinds of fabrics and is activated by artificial and natural light, for as long as there is light; ➔ based on the new Perapret® AIR;
  • CONSCIOUSLY DEEP, a metal-free one-step scouring and dyeing system for medium to very dark colored nylons that stay deep and bright day after day, and are good for you and the planet;
  • EARTH SOFT, a biomass-based and vegan softening system that is suitable for all kind of fibers and makes you comfortable in your own skin;
  • NATURE BOUND, a compostable binder system for food filtration materials that protect you and the planet;
  • ODOR CONTROL 2.0, a system for odor-free sportswear where permastink cannot build up on your favorite clothes, that’s applicable on polyester, cotton and nylon; ➔ based on the new OX20;
  • RAG N’ROLL, a compostable binder system for nonwoven cleaning rags, that protect you and the planet;
  • SAFE SEATS NextGen, a PFC-free* and halogen-free* modular surface treatment system for safer and cleaner seating materials, ➔ based on the new Smartrepel® Hydro SR;
  • SWEET DREAMS, a metal and particle free* system that redefines protection for mattress ticking fabrics, with long-lasting hygiene and outstanding softness, that protects you and the environment;
  • TAKE A BREATH, an enhanced filtration system that keeps your air clean and fresh for longer putting health first and your competition behind;

2 booth events
A WORLD WITHOUT ODORS, FIGHT OR FLIGHT?
Innovation highlight: Biocide-free OX20 odor management solution by SANITIZED AG

Speakers:

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Georg Lang, Head of CC Finishing, Archroma
  • Stefan Müller, Head of BU Textiles Additives Sanitized
  • Yann Ribourdouille , Global registration expert Product Stewardship, Archroma

A WORLD WITHOUT PFC, DREAM OR REALITY?
Innovation highlight: PFC-free* Smartrepel® Hydro SR

Speakers

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Roland Borufka, Head of Competence Center Repellents, Archroma
  • Wolfgang Knaup, Head of R&D repellents, Archroma
  • Yann Ribourdouille, Global registration expert Product Stewardship, Archroma
Quelle:

Archroma / EMG

05.05.2022

Monforts at Techtextil showcasing its finishing and coating technologies

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Quelle:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

31.03.2022

Monforts at Techtextil North America

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Monforts will highlight its advanced finishing and coating technologies for the production of technical textiles at Techtextil North America, which takes place at the Georgia World Congress Center in Atlanta from May 17-19.

The company and its US representative PSP Marketing, of Charlotte, North Carolina, will be part of the centrepiece VDMA German Pavilion at the show.

Energy prices
With energy prices continuing to go through the roof, an emphasis at Techtextil North America will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required. A range of further resource-saving and energy recovery options can be specified per individual line installation.

Advanced machine operation
With the highly intuitive Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Versatility is the key
Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

Quelle:

AWOl Media / A. Monforts Textilmaschinen GmbH & Co. KG

13.10.2021

Mahlo auf der Innovative Textile and Apparel Show

Zum zweiten Mal öffnet die Innovative Textile and Apparel Show dieses Jahr ihr virtuelles Messegelände. Zum zweiten Mal nutzt auch Mahlo die Chance mit Kunden aus aller Welt in Kontakt zu treten. Mahlo präsentiert neueste Systeme und Lösungen für eine effiziente und qualitativ hochwertige Textilproduktion und -veredlung. Dabei steht die Prozessoptimierung in einer digitalen Umgebung im Mittelpunkt.

Fadengerade Ware und optimierte Prozesse
Mahlo steht für hochwertige automatische Schussfadenrichter. Egal ob Walzen- oder Nadelrichtgeräte, ob für feinste Textilien oder große, schwere Waren – Interessenten können sich passend zu ihren speziellen Anforderungen informieren.

Zur hochwertigen Textilherstellung und Veredlung tragen auch Prozesskontrollsysteme wie das Patcontrol PCS zur Mustererkennung und das Famacont PMC zur Regelung von Schussfaden- und Maschenreihendichte bei. Mahlo möchte die Hersteller dabei unterstützen, ihre Produktionsabläufe und damit auch das Endprodukt kosteneffizient zu optimieren.

Zum zweiten Mal öffnet die Innovative Textile and Apparel Show dieses Jahr ihr virtuelles Messegelände. Zum zweiten Mal nutzt auch Mahlo die Chance mit Kunden aus aller Welt in Kontakt zu treten. Mahlo präsentiert neueste Systeme und Lösungen für eine effiziente und qualitativ hochwertige Textilproduktion und -veredlung. Dabei steht die Prozessoptimierung in einer digitalen Umgebung im Mittelpunkt.

Fadengerade Ware und optimierte Prozesse
Mahlo steht für hochwertige automatische Schussfadenrichter. Egal ob Walzen- oder Nadelrichtgeräte, ob für feinste Textilien oder große, schwere Waren – Interessenten können sich passend zu ihren speziellen Anforderungen informieren.

Zur hochwertigen Textilherstellung und Veredlung tragen auch Prozesskontrollsysteme wie das Patcontrol PCS zur Mustererkennung und das Famacont PMC zur Regelung von Schussfaden- und Maschenreihendichte bei. Mahlo möchte die Hersteller dabei unterstützen, ihre Produktionsabläufe und damit auch das Endprodukt kosteneffizient zu optimieren.

Lösungen für Technische Textilien und Nonwovens
Für Technische Textilien und Nonwovens steht ebenso Unterstützung im Produktionsprozess bereit. Im Mittelpunkt dabei: das Qualitätsmesssystem Qualiscan QMS. Das modular konzipierte System, das sich aus Sensoren und Messrahmen zusammensetzt, misst, protokolliert und regelt kritische Parameter wie Flächengewicht, Feuchte oder Schichtdicke über die gesamte Warenbreite. Je nach Anwendung und Aufgabe kommen dazu verschiedene Messverfahren zum Einsatz.

Quelle:

Mahlo GmbH + Co. KG

TexCoat G4 non-contact precision spray fabric-finishing system (c) Baldwin Technology Company Inc.
02.08.2021

Baldwin at Techtextil North America

  • Introducing TexCoat G4 to US textile industry
  • Non-contact precision spray fabric-finishing system enhances sustainability and process control

Baldwin Technology Company Inc. will be showcasing its TexCoat G4 non-contact precision spray fabric-finishing system at the Techtextil North America trade show, held Aug. 23 to 25, in Raleigh, North Carolina.

With extensive sustainability benefits, unprecedented tracking and process control, and Industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, and significantly reduced water and energy consumption.

Baldwin’s innovative non-contact spray technology eliminates chemistry dilution in wet-on-wet processes. The TexCoat G4 consistently and uniformly sprays chemistry across the fabric surface and applies it only where needed, on one or both sides.

  • Introducing TexCoat G4 to US textile industry
  • Non-contact precision spray fabric-finishing system enhances sustainability and process control

Baldwin Technology Company Inc. will be showcasing its TexCoat G4 non-contact precision spray fabric-finishing system at the Techtextil North America trade show, held Aug. 23 to 25, in Raleigh, North Carolina.

With extensive sustainability benefits, unprecedented tracking and process control, and Industry 4.0 integration, the TexCoat G4 provides consistently high-quality fabric finishing, with no chemistry waste, and significantly reduced water and energy consumption.

Baldwin’s innovative non-contact spray technology eliminates chemistry dilution in wet-on-wet processes. The TexCoat G4 consistently and uniformly sprays chemistry across the fabric surface and applies it only where needed, on one or both sides.

Customers can expect no bath contamination during the finishing process, as well as minimal downtime during changeovers, which are made easy with recipe management that includes automated chemistry and coverage selection. The TexCoat G4 also enhances sustainability by wasting no chemistry during color, fabric or chemistry changeovers, and because only the required chemistry volume is applied to the fabric, wet pick-up levels can be reduced by up to 50 percent—leading to 50 percent less water and energy consumption.

Furthermore, in single-side applications, drying steps can be eliminated for various textiles, including those that are back-coated and laminated, thereby streamlining and simplifying the production process.

Quelle:

Baldwin Technology Company Inc.