Aus der Branche

Zurücksetzen
9 Ergebnisse
STFI: Leichtbauneuheiten auf JEC World in Paris (c) silbaerg GmbH und STFI (siehe Nachweis am Bild)
23.02.2024

STFI: Leichtbauneuheiten auf JEC World in Paris

Auf der diesjährigen JEC World zeigt das STFI Highlights aus dem Carbonfaserrecycling sowie einen neuen Ansatz von hanfbasierten Bastfasern, die als Bewehrung im Leichtbau vielversprechende Eigenschaften mitbringen.

Grünes Snowboard
Auf der JEC World in Paris vom 5. bis 7. März 2024 zeigt das STFI ein Snowboard der Firma silbaerg GmbH mit patentiertem anisotropen Kopplungseffekt aus Hanf und recycelten Carbonfasern mit biobasiertem Epoxidharz. An der Entwicklung des Boards waren neben silbaerg und STFI auch die Partner Circular Saxony - das Innovationscluster für die Kreislaufwirtschaft sowie FUSE Composite und die bto-epoxy GmbH beteiligt. Das grüne Snowboard wurde mit JEC Innovation Award 2024 in der Kategorie „Sport, Freizeit und Erholung“ ausgezeichnet.

Auf der diesjährigen JEC World zeigt das STFI Highlights aus dem Carbonfaserrecycling sowie einen neuen Ansatz von hanfbasierten Bastfasern, die als Bewehrung im Leichtbau vielversprechende Eigenschaften mitbringen.

Grünes Snowboard
Auf der JEC World in Paris vom 5. bis 7. März 2024 zeigt das STFI ein Snowboard der Firma silbaerg GmbH mit patentiertem anisotropen Kopplungseffekt aus Hanf und recycelten Carbonfasern mit biobasiertem Epoxidharz. An der Entwicklung des Boards waren neben silbaerg und STFI auch die Partner Circular Saxony - das Innovationscluster für die Kreislaufwirtschaft sowie FUSE Composite und die bto-epoxy GmbH beteiligt. Das grüne Snowboard wurde mit JEC Innovation Award 2024 in der Kategorie „Sport, Freizeit und Erholung“ ausgezeichnet.

VliesComp
Rezyklate in verschiedenen Leichtbaulösungen wieder in den Markt zu bringen, ist das Ziel der im Projekt VliesComp vereinigten Industriepartner Tenowo GmbH (Hof), Siemens AG (Erlangen), Invent GmbH (Braunschweig) und STFI. Beispielhaft wurden dabei unter anderem die Anwendungsfelder „Innovative E-Maschinenkonzepte für die Energiewende“ und „Innovative E-Maschinenkonzepte für die E-Mobilität“ betrachtet. Gezeigt wird auf der JEC World in Paris ein Leichtbaulagerschild für E-Motoren, das auf Basis von Hybridvliesstoffen – einer Mischung aus thermoplastischer Faserkomponenten und recycelter Verstärkungsfasern – sowie auch Vliesstoffen mit 100 % recycelten Verstärkungsfasern hergestellt wurde. Das Lagerschild wurde schlussendlich mit einem Rezyklatanteil von 100 % gefertigt. Die Untersuchungen ergaben, dass im Vergleich zur Variante aus Primärkohlenstofffasern im RTM-Verfahren eine Reduzierung des CO2-Äquivalents um 14 % bei gleicher Leistung möglich ist. Die Berechnung zur Verwendung des Prepreg-Verfahrens unter Nutzung eines Bioharzsystems zeigt ein Potenzial zur Reduzierung des CO2-Äquivalents um fast 70 %.

Bastfaserbewehrung
Zur Stabilitätserhöhung im Pflanzenstängel bilden sich im Rindenbereich Bastfasern aus, die den Stengel stützen, aber im Gegensatz zum starren Holz sehr flexibel aufgebaut sind und es ermöglichen, dass schlanke, hohe Pflanzen sich im Wind bewegen können, ohne zu brechen. Ein neues Verfahren gewinnt die Bastrinde des Hanfes durch Schälen. Die daraus erzielten Kennwerte, wie Zug-E-Modul, Bruchkraft und Dehnung, sind vielversprechend im Vergleich mit den am Markt verfügbaren Endlosrovingen aus Flachs. Das Material könnte als Bewehrung im Leichtbau seine Anwendung finden. Das STFI stellt zur JEC World Bewehrungsstäbe aus, die im Pultrusionsverfahren auf Basis biobasierter Bewehrungsfasern aus Hanfbast für mineralische Matrices, zu einem Gewirke verarbeitet wurden.

Quelle:

Sächsische Textilforschungsinstitut e.V. (STFI)

04.01.2024

Panda Biotech Marks Final Stage Commissioning

Panda Biotech announced that building construction is complete and the official commissioning process to bring its Panda High Plains Hemp Gin™ (the “Panda Hemp Gin”) project online began in early Q4. The commissioning process marks the final stage before beginning commercial operations in Q1 2024 at the 500,000 square foot Wichita Falls, Texas facility. The Panda Hemp Gin will process 10 metric tons of industrial hemp per hour to produce textile-grade fiber, hurd, short-fiber hurd mix, and a nutrient-rich co-product that will be pelletized. The facility is expected to be the largest hemp decortication center in the Western Hemisphere and among the largest in the world.

Using only renewable energy sources, the engineering and production process at the Panda Hemp Gin has been certified green by Mid-South Engineering Company, in accordance with the International Capital Market Association’s Green Bond Principles. Panda Biotech has also partnered with Oritain, a scientific traceability company, to bring the most traceable hemp grown 100 percent in the United States to market.

Panda Biotech announced that building construction is complete and the official commissioning process to bring its Panda High Plains Hemp Gin™ (the “Panda Hemp Gin”) project online began in early Q4. The commissioning process marks the final stage before beginning commercial operations in Q1 2024 at the 500,000 square foot Wichita Falls, Texas facility. The Panda Hemp Gin will process 10 metric tons of industrial hemp per hour to produce textile-grade fiber, hurd, short-fiber hurd mix, and a nutrient-rich co-product that will be pelletized. The facility is expected to be the largest hemp decortication center in the Western Hemisphere and among the largest in the world.

Using only renewable energy sources, the engineering and production process at the Panda Hemp Gin has been certified green by Mid-South Engineering Company, in accordance with the International Capital Market Association’s Green Bond Principles. Panda Biotech has also partnered with Oritain, a scientific traceability company, to bring the most traceable hemp grown 100 percent in the United States to market.

Additionally, Panda Biotech is actively signing contracts with producers to grow the hemp feedstock for the 2024 growing season, as well as purchasing hemp fiber that has already been harvested or processed. The company recently unveiled an unmatched pay-to-grow program for producers to begin growing Panda hemp. With up-front, guaranteed money and agronomy support, Panda producers also receive tested and proven seed at no cost, successfully mitigating the risk producers may assume and underscoring Panda’s commitment and promise to the farming community. The benefits of growing hemp are substantial, as it is an excellent rotational crop that remediates the soil and provides a competitive margin.

“Each piece of the Panda Hemp Gin production line, including the three miles of overhead pneumatic duct lines, refining, blending, mechanical cottonization, hurd bagging and storage, baling, and more, must be individually started, checked, balanced, and commissioned,” says Panda Biotech Executive Vice President Scott Evans. “Currently, all equipment is individually being brought online to be officially placed in service.”

Weitere Informationen:
Panda Biotech hemp
Quelle:

Panda Biotech, LLC.

17.11.2023

Alliance for European Flax-Linen and Hemp: Flax fibres for Sailing boats

The adoption of composite parts based on flax fibres by the Marine Industry continues to grow, with major OEMs as well as smaller shipyards now aiming to take advantage of the reduced carbon impact and impressive mechanical properties they can provide.

“Over the last ten or fifteen years, several innovative flax fibre boats have been built and the fibre has started to gain significant traction,” says Julie Pariset, Innovation & CSR Director at the Alliance for European Flax-Linen and Hemp. “In addition to the environmental benefits, manufacturers are realising significant technical and processing gains with flax fibre composites.”

“Flax is a very low-density fibre, with a high specific stiffness,” she explains. “It can be used to manufacture composite laminates with mechanical properties not dissimilar to typical E-glass composites and the coefficient of thermal expansion of a flax fibre epoxy part is also quite close to that of a carbon fibre part.” This allows the materials to work well in combined assemblies with carbon fibre composites and the flax parts are also highly impact resistant.

The adoption of composite parts based on flax fibres by the Marine Industry continues to grow, with major OEMs as well as smaller shipyards now aiming to take advantage of the reduced carbon impact and impressive mechanical properties they can provide.

“Over the last ten or fifteen years, several innovative flax fibre boats have been built and the fibre has started to gain significant traction,” says Julie Pariset, Innovation & CSR Director at the Alliance for European Flax-Linen and Hemp. “In addition to the environmental benefits, manufacturers are realising significant technical and processing gains with flax fibre composites.”

“Flax is a very low-density fibre, with a high specific stiffness,” she explains. “It can be used to manufacture composite laminates with mechanical properties not dissimilar to typical E-glass composites and the coefficient of thermal expansion of a flax fibre epoxy part is also quite close to that of a carbon fibre part.” This allows the materials to work well in combined assemblies with carbon fibre composites and the flax parts are also highly impact resistant.

Flax fibres also provide acoustic and vibration damping in composite applications, as well as providing a warm and aesthetically pleasing appearance below decks.

ecoRacer30
As a member of the Alliance for European Flax-Linen and Hemp, Bcomp, headquartered in Fribourg, Switzerland, has this year been working with Northern Light Composites (nlcomp), based in Monfalcone, northern Italy, on the creation of what is billed as the first fully recyclable nine-metre-long sailing boat – the ecoRacer30.

The boat is based on nlcomp’s proprietary rComposite technology – a combination of thermoplastic resins and BComp’s ampliTex high-performance natural fibre reinforcement fabrics and patented powerRibs technology.

It was built in a collaborative effort with the help of Barcelona-based Magnani Yachts, which took care of the composite manufacturing, and Sangiorgio Marine, which provided technical assistance as the boat was being assembled at its shipyard in Genova, Italy.

Magnani Yachts has subsequently become the first shipyard to hold an rComposite license and others are now being encouraged to adopt the technology.

The second ecoracer30 is currently under construction and has already been sold and nlcomp is planning to build a fleet of eight of these boats in time to enter a series of regattas in the summer of 2025.

Flax 27 Daysailer
Greenboats, based in Bremen, Germany, is another specialist in building boats from natural fibre composites and has this year launched the Flax 27 daysailer.

The lower hull of this vessel is also made from Bcomp’s ampliTex technical fabrics in combination with a sandwich core of recycled PET bottles. Using a vacuum infusion process, the fibres were integrated with a plant-based epoxy resin in order to further reduce the CO2 footprint of the vessel.

The light structure and modern shapes of the lower hull of the boat result in very fast, sharp and agile handling on the water.

Greenboats has also recently announced significant new backing from alliance member Groupe Depestele, which manages 13,000 hectares of flax land in Normandy, France.

Blue Nomad
A project in Switzerland has meanwhile proposed the use of flax fibre composites in solar-powered habitats designed for comfortable living on the oceans – as the world grapples with the frightening implications of climate change and rising sea levels.

As envisaged by students from Institut auf dem Rosenberg in St Gallen, Switzerland working with Denmark-based SAGA Space Architects, Blue Nomad structures would form modular blocks to establish large communities and oceanic farms.
 

Quelle:

Alliance for European Flax-Linen and Hemp

Tatham: ‘Field to Fibre’ service for industrial hemp fibre production Photo: BTMA / Tatham
Tatham director Tim Porritt
07.07.2023

Tatham: ‘Field to Fibre’ service for industrial hemp fibre production

BTMA member Tatham has just delivered an advanced industrial hemp processing line to a major customer in Turkey and had many fruitful discussions about its machinery for the processing of natural staple fibres at the recent ITMA 2023 held in Milan from June 8-14.

The Bradford, UK-based company continues to equip mills around the world with staple fibre spinning and nonwoven technologies for manufacturing a wide range of products, while its TS system for drives and controls is suitable for retrofitting to all OEM textile machines, to provide user-friendly control systems with complete synchronisation and significant energy savings.

“We are currently fielding a lot of enquiries for technologies for the decortication, fibre opening and fabric forming of hemp,” said Tatham director Tim Porritt. “This is being driven by the sustainability of the fibre and concerns over climate change as brands seek solutions to meet their sustainability goals. As a result, there has been an explosion in the interest in hemp production, from farmers through to fibre production, and a wide range of new potential end-uses are being explored.”

BTMA member Tatham has just delivered an advanced industrial hemp processing line to a major customer in Turkey and had many fruitful discussions about its machinery for the processing of natural staple fibres at the recent ITMA 2023 held in Milan from June 8-14.

The Bradford, UK-based company continues to equip mills around the world with staple fibre spinning and nonwoven technologies for manufacturing a wide range of products, while its TS system for drives and controls is suitable for retrofitting to all OEM textile machines, to provide user-friendly control systems with complete synchronisation and significant energy savings.

“We are currently fielding a lot of enquiries for technologies for the decortication, fibre opening and fabric forming of hemp,” said Tatham director Tim Porritt. “This is being driven by the sustainability of the fibre and concerns over climate change as brands seek solutions to meet their sustainability goals. As a result, there has been an explosion in the interest in hemp production, from farmers through to fibre production, and a wide range of new potential end-uses are being explored.”

Tatham offers a complete ‘Field to Fibre’ service for industrial hemp fibre production and its decortication and cleaning process has a gentle opening action to maintain the fibre length, to make it suitable for subsequent processing.

Quelle:

BTMA

Philipp Köhler folgt auf Dr. Frank Meister TITK - Thüringisches Institut für Textil- und Kunststoff-Forschung e.V.
03.05.2023

TITK: Philipp Köhler folgt auf Dr. Frank Meister

Die größte Abteilung des Thüringischen Instituts für Textil- und Kunststoff-Forschung Rudolstadt (TITK) hat einen neuen Chef. Zum 30. April 2023 folgte auf Dr. Frank Meister sein bisheriger Stellvertreter Philipp Köhler, der den Bereich Native Polymere und Chemische Forschung und damit ein fast 60-köpfiges Team aus Wissenschaftlern, Technikern und Laboranten übernimmt.

„Dr. Frank Meister hat in seiner langen und bemerkenswerten Laufbahn maßgeblich dazu beigetragen, dass die TITK-Gruppe heute so solide aufgestellt ist und gerade durch die Celluloseforschung weltweit eine hohe Anerkennung als kompetenter und vertrauenswürdiger Forschungspartner genießt. Mit Philipp Köhler setzt nun eine überzeugende und noch dazu sehr sympathische Führungspersönlichkeit die erfolgreiche Arbeit dieser wichtigen Abteilung fort,“ so der geschäftsführende Direktor des TITK, Benjamin Redlingshöfer.

Die größte Abteilung des Thüringischen Instituts für Textil- und Kunststoff-Forschung Rudolstadt (TITK) hat einen neuen Chef. Zum 30. April 2023 folgte auf Dr. Frank Meister sein bisheriger Stellvertreter Philipp Köhler, der den Bereich Native Polymere und Chemische Forschung und damit ein fast 60-köpfiges Team aus Wissenschaftlern, Technikern und Laboranten übernimmt.

„Dr. Frank Meister hat in seiner langen und bemerkenswerten Laufbahn maßgeblich dazu beigetragen, dass die TITK-Gruppe heute so solide aufgestellt ist und gerade durch die Celluloseforschung weltweit eine hohe Anerkennung als kompetenter und vertrauenswürdiger Forschungspartner genießt. Mit Philipp Köhler setzt nun eine überzeugende und noch dazu sehr sympathische Führungspersönlichkeit die erfolgreiche Arbeit dieser wichtigen Abteilung fort,“ so der geschäftsführende Direktor des TITK, Benjamin Redlingshöfer.

Als promovierter Polymerchemiker war Dr. Frank Meister zum 1. Juni 1993 von der zentralen Forschung der Leuna-Werke nach Rudolstadt gewechselt. Sein erstes Arbeitsfeld wurde die chemische Modifizierung von Cellulose, um sie direkt, ohne jedes Lösungsmittel verformbar zu machen. Damals hatte das Institut bereits begonnen, die Grundlagen für ein Direktlöseverfahren – das Alleinstellungsmerkmal des TITK – zu legen. In der Folgezeit setzte sich dieser Prozess zur Direktauflösung und Trocken-Nass-Verformung von Cellulose durch. Die daraus erhaltenen Spezialfasern konnten in den kommerziellen Maßstab überführt werden.

Nach drei Jahren wurde Frank Meister stellvertretender Abteilungsleiter, 2001 Chef der Chemischen Forschung am TITK. Meilensteine seiner Laufbahn sind mehr als 50 wissenschaftliche Publikationen, über 30 Patente und mindestens 100 Fachvorträge im In- und Ausland.
Für die Entwicklung des Instituts war die Mitwirkung am Wachstumskern „ALCERU-Hightech“ rund um das patentierte Verfahren zur Herstellung von Cellulose-Funktionsfasern von großer Bedeutung. Die neue Methode zur Direkteinarbeitung unverträglicher flüssiger oder schmelzbarer Substanzen in eine Cellulosefaser brachte dem TITK 2008 auch den Thüringer Forschungspreis.

Das „letzte Highlight“ war für Meister Lyohemp® – die erste Lyocellfaser aus 100 Prozent nicht holzbasiertem Zellstoff. Diese Neuentwicklung auf Grundlage von bisher ungenutzten Hanf-Reststoffen steht beispielhaft für einen Forschungsschwerpunkt am TITK - die Verwendung von alternativen Rohstoffen und Recycling-Materialien.

Bereits seit knapp drei Jahren hat Meister Philipp Köhler auf seine Aufgabe vorbereitet. „Er ist ein exzellenter Wissenschaftler mit sehr genauen Vorstellungen von seiner eigenen Entwicklung. Und er ist mit einer hohen sozialen Kompetenz ausgestattet“, begründet Meister seine Wahl. Philipp Köhler ist mit 33 Jahren einer der jüngsten Abteilungsleiter, die das TITK je hatte.

Dass es darauf ankommt, nicht nur im Hier und Jetzt zu leben, sondern den Blick schon voraus zu richten, ist ein Prinzip, das er unbedingt beibehalten will. „Denn auch nachwachsende Rohstoffe wie Holz sind nur begrenzt verfügbar. Deshalb müssen wir uns schon heute Gedanken machen, was danach als Faserrohstoff dienen könnte.“ Zum Beispiel Proteine oder Bakterien-Zellulose, sagt Köhler. „Da, wo andere suchen, müssen wir schon Lösungen durchdacht und industrietaugliche, anwendbare Prozesse parat haben, die noch dazu nachhaltig und ressourceneffizient sind.“

Der gebürtige Saalfelder kam unmittelbar nach dem Studium der Werkstofftechnik 2014 als „Master of Engineering“ ans TITK. Als wissenschaftlicher Mitarbeiter übernahm er bestehende Projekte und half unter anderem mit, die vorhandenen Produkte mit Funktionsfasern weiter zu verbessern. Aktuell promoviert er bei Professor Chokri Cherif an der TU Dresden zu alternativen Materialien für die Faserherstellung.

Weitere Informationen:
TITK TITK Rudolstadt
Quelle:

TITK - Thüringisches Institut für Textil- und Kunststoff-Forschung e.V.

12.12.2022

CELC becomes Alliance for European Flax-Linen & Hemp

  • The European Confederation for Flax and Hemp (CELC) has unveiled its new visual identity and name: Alliance for European Flax-Linen & Hemp.
  • The European Flax-Linen and Hemp industries have announced they are organizing their development around a strengthened team with a clear mission: to expand the entire industry whilst making European Flax-Linen and Hemp the preferred sustainable premium fibers worldwide.
  • The Alliance for European Flax-Linen & Hemp will launch its new identity in the first semester of 2023 for all target groups including Natural Fiber Composite Applications.

CELC has announced its new name and visual identity. The organization, which is the only European agro-industrial organization that serves as a global reference, will now be known as the Alliance for European Flax-Linen & Hemp.

  • The European Confederation for Flax and Hemp (CELC) has unveiled its new visual identity and name: Alliance for European Flax-Linen & Hemp.
  • The European Flax-Linen and Hemp industries have announced they are organizing their development around a strengthened team with a clear mission: to expand the entire industry whilst making European Flax-Linen and Hemp the preferred sustainable premium fibers worldwide.
  • The Alliance for European Flax-Linen & Hemp will launch its new identity in the first semester of 2023 for all target groups including Natural Fiber Composite Applications.

CELC has announced its new name and visual identity. The organization, which is the only European agro-industrial organization that serves as a global reference, will now be known as the Alliance for European Flax-Linen & Hemp.

The new name - Alliance for European Flax-Linen & Hemp – reflects a newly restructured European industry which brings together the entire value chain around a common goal: to make European Flax-Linen and Hemp the preferred sustainable premium fibers worldwide for Fashion, Technical Textiles and Natural Fiber Composite Applications.

The new brand identity is accompanied by a new logo that connects the identity, values and strategic direction of the Alliance for European Flax-Linen & Hemp. In addition to visual changes, the Alliance has announced enhanced values and a clear strategic path to turn European Flax-Linen and Hemp into the preferred sustainable premium fibers worldwide.

The Alliance’s future development pathway will focus on three distinct strategic pillars.

  • Enhancing its work in publishing structured, reliable economic data and information on a regular basis, in order to be able to continuously deploy a set of specific decision-making support tools.
  • Transforming the Alliance for European Flax-Linen & Hemp into an innovative and sustainable international reference which continuously improves its environmental footprint through two essential elements: traceability and Life Cycle Analysis.
  • Guaranteeing quality and better describing the quality of its fibers by using technological innovations to create a reference for describing long fibers. A description of European Flax® fibers through optical imaging will soon complement the organoleptic method.

“Europe is the top global producer of Flax fiber. In an international context of growth and reindustrialization, Flax, which accounts for just 0.4% of global textile fibers, is a globalized fiber with remarkable technical and environmental properties. At the same time, the European textile Hemp industry is organizing itself to boost growth. Today, the European Flax-Linen and Hemp ecosystem thus embodies an innovative and sustainable European textile dynamic that meets the needs of consumers and brands.” Bart Depourcq, President, Alliance for European Flax-Linen & Hemp.

Quelle:

Alliance for European Flax-Linen & Hemp

JUMBO-Textil: Innovative Flechttechnik. Innovative Produkte. (c) JUMBO-Textil
Lochkordel von JUMBO-Textil
29.09.2021

JUMBO-Textil: Innovative Flechttechnik. Innovative Produkte.

  • JUMBO-Textil bietet elastische Hightech-Geflechte – produziert an Hightech-Anlagen

Schmaltextile Lösungen für unsere Kunden zu entwickeln – schnell, flexibel und präzise –, das ist unser Anspruch. An uns und an unsere Technik. Denn für erstklassige industrielle Lösungen braucht es erstklassige Technologie. Hochautomatisiert und digital gesteuert. Technologie, wie sie in unserem Variationsflechter von Herzog ¬steckt – dem High-Performer unter den modernen Flechtmaschinen. Auf der Spezial-Anlage fertigt JUMBO-Textil als erster Schmaltextiler überhaupt elastische Lochkordeln.

  • JUMBO-Textil bietet elastische Hightech-Geflechte – produziert an Hightech-Anlagen

Schmaltextile Lösungen für unsere Kunden zu entwickeln – schnell, flexibel und präzise –, das ist unser Anspruch. An uns und an unsere Technik. Denn für erstklassige industrielle Lösungen braucht es erstklassige Technologie. Hochautomatisiert und digital gesteuert. Technologie, wie sie in unserem Variationsflechter von Herzog ¬steckt – dem High-Performer unter den modernen Flechtmaschinen. Auf der Spezial-Anlage fertigt JUMBO-Textil als erster Schmaltextiler überhaupt elastische Lochkordeln.

Hochleistungsanlage für extrem stabile textile Bauteile
Die Spezial-Anlage verbindet anspruchsvolle Klöppeltechnik mit digitaler Steuerung und ermöglicht so die Herstellung von hochkomplexen individuell spezifizierbaren Flechtstrukturen. Die Technologie des Variationsflechters sorgt für einen ununterbrochenen Faserverlauf ¬über alle Verzweigungen hinweg. Das erlaubt nicht nur individuelle, eigenwillige Geometrien, es dient auch und vor allem der Stabilität der Bauteile. Denn wo bei anderen Verfahren durch Laserschnitt, Nähte oder Knoten bruchempfindliche Verzweigungsstellen entstehen, flicht der Variationsflechter die verzweigten Stränge einfach durch. Weil der Faserverlauf in geflochtenen Verzweigungen nicht unterbrochen wird, erhöht sich die Belastbarkeit der Textilien deutlich. Und es entstehen individuelle Geflechte für ganz unterschiedliche Anwendungsmöglichkeiten.
 
Klöppel-Technologie für hochkomplexe Strukturen
Die Flügelräder des Variationsflechters sind – anders als bei klassischen Flechtanlagen – quadratisch angeordnet. Bis zu 8 unterschiedliche Stränge lassen sich mit dem textilen Alleskönner flechten und verflechten. Alle Klöppel können separat programmiert und dadurch die Klöppelbahnen variabel und individuell miteinander kombiniert werden. Auch Schlauchgeflechte mit präzise definierten eingeflochtenen Öffnungen, triaxiale Geflechte und hochkomplexe Preforms fertigt JUMBO-Textil mit dem Variations- oder kurz: Varioflechter. Die Geometrien der Schmaltextilien reichen bis hin zu Netzstrukturen. Bei umflochtenen Kabeln schaffen wir über Verflechtungen zwischen Kern und Schutzummantelung stabile Verbindungen im Kern-Mantel-Geflecht, die insbesondere an Windungen für Schutz sorgt: Unerwünschtes Verrutschen von Kern und Mantel gibt es nicht mehr.

Individuelle Geflechtarchitekturen – für Automotive, Outdoor und mehr
Komplexe unelastische Kordeln laufen bei JUMBO-Textil schon lange vom Varioflechter. Für Lochkordeln – oder Bifurkationskordel (von lat.: furca, die Gabel) – werden die Klöppelweichen individuell so programmiert, dass Anordnung und Länge der Verzweigung präzise den Anforderungen entsprechen. Sie kommt u. a. im Automotive-Bereich, in der Bauindustrie und der Outdoor-Branche zum Einsatz, um Elemente metallfrei ein- oder abzuhängen.  

Elastische Lochkordel vom Elastics-Spezialisten
Die elastischen Loch-Geflechte von JUMBO-Textil sind neu auf dem Markt. „Der Variationsflechter bietet uns fantastische Möglichkeiten: Wir können vorkonfigurieren, was wir flechten wollen, und sind darin vollkommen frei. Der Rapport wird dabei computergesteuert“, erläutert Holger Vehring, Project Engineer von JUMBO-Textil. „Ein nahtlos geflochtener Kabelbaum-Schlauch, der den Kabel-Dschungel ordnet, für Automotive, Flechtschläuche mit definierten Öffnungen für leitfähige Elemente in Smart Textiles oder Reha-Anwendungen, als Spann-Elemente in Rucksäcken oder Funktionskleidung – die Einsatzmöglichkeiten sind groß. Für zahlreiche Anwendungen, bei denen bisher metallische Werkstoffe zum Einsatz kamen, können dank dieser Technik textile – also leichtere, leisere und flexiblere – Bauteile genutzt werden.“

30.07.2021

Hanf als Rohstoff textiler Innovationen

Das Thema Nachhaltigkeit ist immer wieder Bestandteil der Forschungs- und Entwicklungsarbeiten am Sächsischen Textilforschungsinstitut. In der aktuellen Ausgabe der STFI-Webtalks wird der Schwerpunkt auf nachhaltige und innovative Neuentwicklungen, im Speziellen mit dem Rohstoff Hanf gelegt.

Hanf ist abseits von Cannabis- und Seilherstellung vielseitig einsetzbar. Wie aus den Naturfasern neuartige Produkte entstehen können, wird Inhalt der Vorträge der Wissenschaftlerinnen Elke Thiele und Ina Sigmund sein. Beide präsentieren Ergebnisse von Projekten, deren Grundlage der Rohstoff Hanf bildete:

Der erste Teil der webTalks beschäftigt sich mit Biogenen Heavy Tows. Mit dem Ziel, Hochleistungsfaserverbunde aus Hanfbast zu entwickeln, wurde das Projekt gemeinsam mit den Forschungspartnern Invent GmbH Braunschweig, Technitex Sachsen GmbH, Hohenstein-Ernstthal und Hanffaser Uckermark eG, Prenzlau bearbeitet. In der Präsentation werden Möglichkeiten der Bastfaseraufbereitung zu endlosen Fasersträngen dargestellt und Varianten der Halbzeugherstellung präsentiert. Die Kennwerte der neuartigen Naturfaserverbunde bewegen sich im Bereich von Glasfaserverbunden.

Das Thema Nachhaltigkeit ist immer wieder Bestandteil der Forschungs- und Entwicklungsarbeiten am Sächsischen Textilforschungsinstitut. In der aktuellen Ausgabe der STFI-Webtalks wird der Schwerpunkt auf nachhaltige und innovative Neuentwicklungen, im Speziellen mit dem Rohstoff Hanf gelegt.

Hanf ist abseits von Cannabis- und Seilherstellung vielseitig einsetzbar. Wie aus den Naturfasern neuartige Produkte entstehen können, wird Inhalt der Vorträge der Wissenschaftlerinnen Elke Thiele und Ina Sigmund sein. Beide präsentieren Ergebnisse von Projekten, deren Grundlage der Rohstoff Hanf bildete:

Der erste Teil der webTalks beschäftigt sich mit Biogenen Heavy Tows. Mit dem Ziel, Hochleistungsfaserverbunde aus Hanfbast zu entwickeln, wurde das Projekt gemeinsam mit den Forschungspartnern Invent GmbH Braunschweig, Technitex Sachsen GmbH, Hohenstein-Ernstthal und Hanffaser Uckermark eG, Prenzlau bearbeitet. In der Präsentation werden Möglichkeiten der Bastfaseraufbereitung zu endlosen Fasersträngen dargestellt und Varianten der Halbzeugherstellung präsentiert. Die Kennwerte der neuartigen Naturfaserverbunde bewegen sich im Bereich von Glasfaserverbunden.

Anschließend werden im zweiten Teil innovative Maschenwaren aus biologisch angebautem Hanf vorgestellt, die sogenannten Lyohemp-Strickwaren. Hanf aus regionalem Anbau ist aufgrund seines Eigenschaftsprofils nur bedingt für die Textilproduktion geeignet. Stand der Technik sind Vliesstoffe als textile Halbzeuge für die Produktion von Naturfaserverstärkten Kunststoffen (NFK) für die Automobilindustrie oder Dämmstoffe. Hanfreststoffe bzw. ungenügende Faserqualitäten wurden daher als Ausgangsmaterial für die Zellstoffgewinnung herangezogen. Aus Hanfzellstoff wurde nach dem Lyocell-Verfahren eine Celluloseregeneratfaser entwickelt (Lyohemp), die sich zu feinen Garnen ausspinnen lässt.

Nächste Ausgabe der STFI webTalks am 12. August 2021 von 10:00 bis 10:45Uhr.
Die Teilnahme ist kostenlos und ohne Anmeldung über den Link möglich.

Weitere Informationen:
STFI Webtalks Webtalk Hanffasern
Quelle:

Sächsisches Textilforschungsinstitut e.V. (STFI)

11.05.2021

Devan launches bio-based softener and quick-dry finish

Devan Chemicals recently added two more products to its range of bio-based textile finishes. One being a softener, the other one a quick-dry finish. Both are derived from vegetable oils and are in line with the company’s latest innovations on bio-based chemistry.

Due to the Covid-pandemic, serving as an accelerator for a worldwide green economy, the textile industry is increasingly seeking more sustainable and products fit-for-circular programs. According to McKinsey & Company, the textile industry will experience innovation surrounding sustainably sourced raw materials and bio-based chemical additives to accommodate increasing consumer demand.

Devan Chemicals recently added two more products to its range of bio-based textile finishes. One being a softener, the other one a quick-dry finish. Both are derived from vegetable oils and are in line with the company’s latest innovations on bio-based chemistry.

Due to the Covid-pandemic, serving as an accelerator for a worldwide green economy, the textile industry is increasingly seeking more sustainable and products fit-for-circular programs. According to McKinsey & Company, the textile industry will experience innovation surrounding sustainably sourced raw materials and bio-based chemical additives to accommodate increasing consumer demand.

Devan launched its first bio-based technology in 2019 and is fully committed to making bio-based versions of their existing textile finishes. ‘We have put ourselves on a mission to be able to extend our Bio-Based range further”, says Sven Ghyselinck, CEO of Devan. “We wanted to make an even bigger impact on circularity than before, therefore we looked into what fabric producers use a lot: softeners and moisture management systems. Only by focusing more on the large volume products, can we support the industry to have a bigger impact on sustainability. After the growing success of our natural antimicrobial BI-OME NTL, we are proud to now introduce our new natural Passerelle line”.

Passerelle Soft NTL is a durable softness technology based on vegetable ingredients. The technology is wash durable and can be used with natural fibres like hemp, cotton, but is also fit for synthetic fibres like rPES, PA. The bio content of the technology is above 85% (ASTM D6866-20).

Passerelle Quick-Dry NTL is a moisture management technology also based on vegetable ingredients. This bio-based finish enables high wicking and evaporation capability which helps to evaporate water/sweat easier and faster. The technology is also > 60% (28 days) biodegradable according to OECD 301B.