From the Sector

Reset
5 results
14.10.2021

Baldwin brings new connected technology to FEFCO Technical Seminar

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

Baldwin Technology Company Inc. will showcase its new portfolio of optimized LED-UV curing, IRdrying and automated cleaning solutions—all specifically designed for corrugated high-graphics printers—at the European Federation of Corrugated Board Manufacturers (FEFCO) Technical Seminar, held October 20 to 22 in Copenhagen, Denmark.

Baldwin’s FlexoCleanerBrush™ removes hickeys in four seconds and can clean plates within three to four minutes, increasing print quality and providing a cleaner, safer work environment. This automated cleaner removes fibers, debris and fine lines from printing plates at the beginning, during or at the end of a job, allowing printers to achieve optimal quality with minimal downtime—Baldwin has a proven track record of enabling significant productivity improvements for its long list of customers. Designed to replace all manual activities, this cleaning system eliminates skin contact with wash agents, increasing workers’ safety.

For wide-format flexo corrugated box printing, Baldwin’s AMS Spectral UV has engineered CorruCure™, a new generation of LEDUV technology that offers more than a 60% reduction in power consumption in an ultra-compact UV lamp head. This revolutionary solid-state curing system, designed specifically for corrugated LED printing, emits almost no heat or ozone, and accommodates width-switching. It also enables the curing of high-value decorative solutions, such as full-gloss, spot and matte coating effects on a variety of corrugated substrates, making it the ideal addition for product enhancement.

Lastly, Baldwin’s FlexoDry2™ infrared dryer, developed for corrugated flexo printing presses, utilizes patented Diamond IR lamps capable of reducing energy consumption by up to 30%, when compared to traditional IR dryers with aluminum or gold reflectors. Dramatically improved drying enhances color definition, and reduces or eliminates marking, while allowing full-speed printing. The system offers an optional integrated hot-air knife with temperature control to provide better surface drying. Taking safety into consideration, the FlexoDry2 comes with an integrated safety light curtain as standard and an optional camera vision system.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

(c) Baldwin Technology Company Inc. / Barry-Wehmiller
20.07.2021

Baldwin to unveil FlexoCleanerBrush™ at SuperCorrExpo

Baldwin Technology Company Inc. will showcase a new generation of innovative technologies for optimized corrugated high-graphics package printing at SuperCorrExpo, taking place in Orlando, Florida, from Aug. 8 to 12.

The FlexoCleanerBrush™ enhances the print quality and improves worker safety in corrugated printing. The system automatically removes dust and contamination from the plate in seconds during production, without stopping the press. It also performs full end-of-job plate cleaning and drying in fewer than four minutes, enabling increased uptime and sustainability. A carbon fiber core keeps even the ultra-wide FlexoCleanerBrush to a minimal weight, and ensures cleaning is stable, uniform and consistent throughout the plate’s width. Because the system is fully automatic and spans the entire width of the plate cylinder, the FlexoCleanerBrush improves safety by eliminating routine operator contact with the machine, while also reducing the risk of cylinder nip injuries and contact with wash agents.

Baldwin Technology Company Inc. will showcase a new generation of innovative technologies for optimized corrugated high-graphics package printing at SuperCorrExpo, taking place in Orlando, Florida, from Aug. 8 to 12.

The FlexoCleanerBrush™ enhances the print quality and improves worker safety in corrugated printing. The system automatically removes dust and contamination from the plate in seconds during production, without stopping the press. It also performs full end-of-job plate cleaning and drying in fewer than four minutes, enabling increased uptime and sustainability. A carbon fiber core keeps even the ultra-wide FlexoCleanerBrush to a minimal weight, and ensures cleaning is stable, uniform and consistent throughout the plate’s width. Because the system is fully automatic and spans the entire width of the plate cylinder, the FlexoCleanerBrush improves safety by eliminating routine operator contact with the machine, while also reducing the risk of cylinder nip injuries and contact with wash agents.

Also on view in Baldwin’s SuperCorrExpo booth, the FlexoDry™ is a fully integrated IR drying system, specifically developed for corrugated flexo printing presses. It reduces energy consumption by up to 30 percent over standard IR dryers through patented Diamond IR™ lamps. The system delivers improved drying results because of a unique optical design that produces higher intensity for enhanced color definition, and reduces or eliminates marking altogether, allowing for high-speed and full-confidence printing.

Additionally, Baldwin will showcase LED-UV technology, designed by its AMS Spectral UV division for wide-format flexo corrugated box printing.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

Baldwin showcases innovations for corrugated flexo printers at ConneXion (c) Baldwin, Barry-Wehmiller
20.05.2021

Baldwin showcases innovations for corrugated flexo printers at ConneXion

Baldwin Technology Company Inc. will showcase its key innovative technologies for optimized corrugated high-graphics package printing at the ConneXion virtual expo, taking place from June 1 to 8. In Baldwin’s virtual exhibit, visitors will experience fully automated flexo plate-cleaning systems, an energy-efficient IR (infrared) drying solution and LED-UV curing systems, all of which increase print quality and productivity, with operator safety and sustainability in mind.

Key innovative technologies:

Baldwin Technology Company Inc. will showcase its key innovative technologies for optimized corrugated high-graphics package printing at the ConneXion virtual expo, taking place from June 1 to 8. In Baldwin’s virtual exhibit, visitors will experience fully automated flexo plate-cleaning systems, an energy-efficient IR (infrared) drying solution and LED-UV curing systems, all of which increase print quality and productivity, with operator safety and sustainability in mind.

Key innovative technologies:

  • The FlexoCleanerBrush™, a solution to enhance print quality and improve worker safety in corrugated printing.
  • The FlexoCleanPick™, a system designed to automatically remove hickeys—typically caused by paper fibers, dust and ink contamination, and other causes of printing defects—from the plate during the print run without stopping the press or requiring operator skin contact with wash agents.
  • The FlexoDry2™, a fully integrated IR drying system, specifically developed for corrugated flexo printing presses, that reduces energy consumption by up to 30 percent over standard IR dryers via the use of patented Diamond IR™ lamps.
  • A new generation of LED-UV technology—designed by AMS Spectral UV, a Baldwin Technology company, for wide-format flexo corrugated box printing—represents the latest in solid-state LED curing innovations and offers more than a 50 percent reduction in power consumption, compared to traditional UV systems, in an ultra-compact lamphead that fits at the end of the press or between printing units.

You can register here.

Source:

Barry-Wehmiller

Baldwin receives three FlexoCleanerBrush™ orders in 30 days (c) Baldwin Technology
Baldwin’s three new FlexoCleanerBrush installations are located in Bevaria (Germany), Michigan (US) and Florida (US). The Florida order was secured in partnership with local agent Technoflex in South Carolina (US).
23.03.2021

Baldwin receives three FlexoCleanerBrush™ orders in 30 days

  • Full-width automated cleaning system will be installed on high-graphics corrugated presses

Baldwin Technology Company Inc. has successfully landed three new FlexoCleanerBrush orders, with a total of 16 cleaning heads, from customers in the US and Germany. During the COVID-19 pandemic, Baldwin has delivered a total of 30 FlexoCleanerBrush cleaning heads, thanks to close collaboration between onsite team members, local agents, the company’s global sales organization, and support from its product and technology center in Germany. With the FlexoCleanerBrush system, an inline cleaning station installed within each print unit uses a brush that runs the full width of each printing plate. Paired with a precision spray application system, the FlexoCleanerBrush evenly distributes a mixture of detergent and water across the plate as it spins, gently cleaning its surface. The plates are then dried by the integrated air knife.

  • Full-width automated cleaning system will be installed on high-graphics corrugated presses

Baldwin Technology Company Inc. has successfully landed three new FlexoCleanerBrush orders, with a total of 16 cleaning heads, from customers in the US and Germany. During the COVID-19 pandemic, Baldwin has delivered a total of 30 FlexoCleanerBrush cleaning heads, thanks to close collaboration between onsite team members, local agents, the company’s global sales organization, and support from its product and technology center in Germany. With the FlexoCleanerBrush system, an inline cleaning station installed within each print unit uses a brush that runs the full width of each printing plate. Paired with a precision spray application system, the FlexoCleanerBrush evenly distributes a mixture of detergent and water across the plate as it spins, gently cleaning its surface. The plates are then dried by the integrated air knife.

“With two of the recent orders, the customers had already installed the FlexoCleanerBrush in other locations. One of them reported as much as a 30 percent production capacity increase, thanks to the  installation,” said Lee Simmonds, Regional Sales Manager at Baldwin. “Both customers have experienced insufficient results with their original traversing cloth cleaning systems, which will now be removed and replaced with the full-width, stand-alone, automated FlexoCleanerBrush technology from Baldwin.”

Improving sustainability is one of the key drivers for investments in the corrugated printing industry. The FlexoCleanerBrush dramatically cuts water waste by cleaning plates more efficiently. In a recent independent study that was conducted to validate the capacity of the automated system, the FlexoCleanerBrush could fully clean and dry all printing plates in less than four minutes and pick hickeys in seconds.

Besides offering efficient cleaning during runs and fast end-of-job cleaning, the FlexoCleanerBrush system also enables operators to remove dry plates from the machine without the potential risk of plates sticking together once they are placed back in the plateracking system. This helps to ensure increased board throughput, less downtime and a safer working environment by eliminating operators’ contact with nip points, moving parts and chemicals.

Source:

Baldwin Technology

24.06.2020

VPK Group invests in FlexoCleanerBrush™ from Baldwin Technology

  • New system automatically cleans corrugated printing plates in less than four minutes

Baldwin Technology Company Inc. has announced that corrugated packaging market leader VPK Group has recently installed a FlexoCleanerBrush. This new system—which automatically cleans and dries corrugated printing plates in less than four minutes—has been added to VPK’s advanced 2.1-meter-wide six-color Göpfert Ovation High Board Line flexographic printer at the company’s new high-bay factory in Halden, Norway.

  • New system automatically cleans corrugated printing plates in less than four minutes

Baldwin Technology Company Inc. has announced that corrugated packaging market leader VPK Group has recently installed a FlexoCleanerBrush. This new system—which automatically cleans and dries corrugated printing plates in less than four minutes—has been added to VPK’s advanced 2.1-meter-wide six-color Göpfert Ovation High Board Line flexographic printer at the company’s new high-bay factory in Halden, Norway.

With the FlexoCleanerBrush system, an inline cleaning station installed within each print unit uses a brush that runs the full width of each printing plate. Paired with a precision spray application system, the FlexoCleanerBrush evenly distributes a mixture of approximately five percent detergent and water across the plate as it spins, gently cleaning its surface. The plates are then dried by the integrated air knife. Cleaning cycles can be controlled through the FlexoCleanerBrush’s operator panel or the integrated Göpfert human-machine interface. Besides offering efficient cleaning during runs and fast end-of-job cleaning, the FlexoCleanerBrush system also enables operators to remove dry plates from the machine without the potential risk of plates sticking together once they are placed back in the plate-racking system. This helps to ensure increased board throughput, less downtime and a safer working environment by eliminating operators’ contact with nip points, moving parts and chemicals.

Source:

Baldwin Technology Company Inc.