From the Sector

Reset
4 results
© ITM/TU Dresden
Woven hemisphere for usage in radome antennaes
15.12.2022

AVK Innovation Award 2022 to young engineers from ITM at TU Dresden

  • Award for near-net-shape 3D meshes for use in fibre-reinforced plastics

As part of the JEC FORUM DACH 2022, the AVK Innovation Awards were presented in Augsburg on November 29th. The innovation price in the category "Research/Science" (first place) was awarded to the team of scientists Dipl.-Ing. Dominik Nuss, Dr.-Ing. Cornelia Sennewald and Prof. Dr.-Ing. habil. Chokri Cherif.

With the development of the pull-off-free Jacquard weaving technology including the technological know-how in the field of highly complex 2D and 3D fabric geometries, which has been established at the ITM of the TU Dresden for many years, Dominik Nuss has succeeded in including different yarn lengths locally into the fabric structure solely through targeted variation of the fabric weave. There-fore, it is now possible to produce completely new types of fabrics without additional draping, especially spherically curved fabrics, but also large-format spiral or even curved fabrics. The fact that the required near-net-shape geometry of the component to be reinforced can be reproduced with significantly reduced preforming steps is to be emphasized.

  • Award for near-net-shape 3D meshes for use in fibre-reinforced plastics

As part of the JEC FORUM DACH 2022, the AVK Innovation Awards were presented in Augsburg on November 29th. The innovation price in the category "Research/Science" (first place) was awarded to the team of scientists Dipl.-Ing. Dominik Nuss, Dr.-Ing. Cornelia Sennewald and Prof. Dr.-Ing. habil. Chokri Cherif.

With the development of the pull-off-free Jacquard weaving technology including the technological know-how in the field of highly complex 2D and 3D fabric geometries, which has been established at the ITM of the TU Dresden for many years, Dominik Nuss has succeeded in including different yarn lengths locally into the fabric structure solely through targeted variation of the fabric weave. There-fore, it is now possible to produce completely new types of fabrics without additional draping, especially spherically curved fabrics, but also large-format spiral or even curved fabrics. The fact that the required near-net-shape geometry of the component to be reinforced can be reproduced with significantly reduced preforming steps is to be emphasized.

Continuous simulation aided engineering from CAD design to integrally woven 2D and 3D preforms by means of highly complex weave development for spatial constructions is a unique at the ITM, which was indispensable for the development of these promising woven high-tech structures. This technology is completely new and has never been carried out in this way before. The fabric structures are characterised by a high innovation level due to their geometric diversity and purposes. It can be used in numerous applications and further more contributes to the development of completely new fields of application. The technology can be implemented on all Jacquard weaving machines with only an additional device and the preform geometry is only determined by the control of the Jacquard machine. The preform geometry can be used in the full working width of the weaving machine.

Professor Chokri Cherif, Institute Director of the ITM, and his team are very pleased about these continuous research success in the constantly growing research field of 3D weaving technology, which are achieved at the ITM in close cooperation with industry and users. "This award is a special honour for our institute and confirms that the many years of our excellent research in the field of near-net-shape 3D weaving for the fibre-reinforced plastics sector plays a significant role and that we are making a significant contribution to the sustainable and resource-efficient production of lightweight structures with our development".

Source:

ITM/TU Dresden

Copyright: MK-Fotografie & JECDachforum
from left to right: Dirk Punke, Gerhard Lettl, Dr. Michael Effing, AVK-GF Dr. Elmar Witten, Prof. Jens Ridzewski, Michael Polotzki
08.12.2022

AVK Federation of Reinforced Plastics board unanimously re-elected

The German Federation of Reinforced Plastics (AVK) re-elected its previous Board on 29 November 2022 in Augsburg during the regular Board elections at the JEC Forum DACH.

At the constituent board meeting on 6 December 2022, the board positions were also confirmed. Dr. Michael Effing, Managing Director of AMAC GmbH, remains Chairman of the Board, and Dirk Punke, Managing Director of BÜFA Thermoplastics Composites GmbH, is Deputy Chairman. Treasurer is Prof. Jens Ridzewski, IMA Materialforschung und Anwendungstechnik GmbH, the other board members: Gerhard Lettl, Managing Director C.F. Maier Europlast GmbH & Co. KG and Michael Polotzki, Managing Director Menzolit S.r.L. The board is officially in office for three years from 1.1.2023.

"It's nice to see the Board's work so well evaluated that there is no doubt that this will continue for the next legislative period. We are very much looking forward to that," explains Managing Director Dr Elmar Witten, the members' vote. The general meeting took place during the JEC Forum DACH.

The German Federation of Reinforced Plastics (AVK) re-elected its previous Board on 29 November 2022 in Augsburg during the regular Board elections at the JEC Forum DACH.

At the constituent board meeting on 6 December 2022, the board positions were also confirmed. Dr. Michael Effing, Managing Director of AMAC GmbH, remains Chairman of the Board, and Dirk Punke, Managing Director of BÜFA Thermoplastics Composites GmbH, is Deputy Chairman. Treasurer is Prof. Jens Ridzewski, IMA Materialforschung und Anwendungstechnik GmbH, the other board members: Gerhard Lettl, Managing Director C.F. Maier Europlast GmbH & Co. KG and Michael Polotzki, Managing Director Menzolit S.r.L. The board is officially in office for three years from 1.1.2023.

"It's nice to see the Board's work so well evaluated that there is no doubt that this will continue for the next legislative period. We are very much looking forward to that," explains Managing Director Dr Elmar Witten, the members' vote. The general meeting took place during the JEC Forum DACH.

Source:

AVK Industrievereinigung Verstärkte Kunststoffe

09.10.2018

JEC Group announces appointment of CEO and JEC World event Director

ERIC PIERREJEAN, CEO OF JEC GROUP

Mr. Eric PIERREJEAN, who joined the company in January, has been appointed Chief Executive Officer, succeeding to Mrs. Frédérique MUTEL. He will be in charge of the further development of the company after two decades of growth under Mrs. MUTEL leadership, dedicated to the development and the promotion of the composite materials industry. Before joining JEC Group, Eric PIERREJEAN was Division General Manager at Comexposium from 2011 to 2017. Prior to this, he spent much of his career in sales and marketing positions, spending more than 15 years in the automotive sector (BMW Group, Land Rover) as well as in the sports goods industry (Nike).

ADELINE LARROQUE, EVENTS DIRECTOR FOR EMEA

ERIC PIERREJEAN, CEO OF JEC GROUP

Mr. Eric PIERREJEAN, who joined the company in January, has been appointed Chief Executive Officer, succeeding to Mrs. Frédérique MUTEL. He will be in charge of the further development of the company after two decades of growth under Mrs. MUTEL leadership, dedicated to the development and the promotion of the composite materials industry. Before joining JEC Group, Eric PIERREJEAN was Division General Manager at Comexposium from 2011 to 2017. Prior to this, he spent much of his career in sales and marketing positions, spending more than 15 years in the automotive sector (BMW Group, Land Rover) as well as in the sports goods industry (Nike).

ADELINE LARROQUE, EVENTS DIRECTOR FOR EMEA

Mrs. Adeline LARROQUE joins JEC Group as Show Director JEC World and EMEA Events with more than 15 years of Global work experience as she has worked in several countries such as USA, UK, China, India, Qatar and UAE where she has developed a strong skill set in exhibitions and events management. After a successful experience at Reed Exhibitions France and China managing numerous exhibitions in the Aerospace, Material, Security, Maritime, Logistics, Construction and Medical industries, she then worked for Qatar Tourism Authority as Head of Exhibitions driving growth for the Doha Jewellery Show, Qatar Motor Show and Women Fashion exhibitions. Lately, she worked for the Events division of the Daily Mail Group supervising the Abu Dhabi International Petroleum Exhibition and Conference as Event Director.

More information:
JEC Group
Source:

APOCOPE

Frédérique MUTEL (c)AGENCE APOCOPE
Frédérique MUTEL
20.08.2018

Frédérique MUTEL - Officer in the Order of the Legion of Honour

Frédérique MUTEL has just been promoted to the rank of Officer in the Order of the Legion of Honour by decree of the President of the French Republic, on 13 July 2018.

Frédérique MUTEL dedicated herself to advanced technologies at Dassault Group Sogitec, Accenture, Thales and Blenheim before joining the company JEC, recently created to develop composite materials, in 1997.

From 1997 to 2018, Frédérique MUTEL, President of JEC Group, made a major contribution to the composites industry. Her pioneering and unifying work helped to secure the international exposure of this industry.

Contact Frédérique MUTEL
Email: frederique.mutel@orange.fr
Tel: +33 6 80 70 78 71

Frédérique MUTEL has just been promoted to the rank of Officer in the Order of the Legion of Honour by decree of the President of the French Republic, on 13 July 2018.

Frédérique MUTEL dedicated herself to advanced technologies at Dassault Group Sogitec, Accenture, Thales and Blenheim before joining the company JEC, recently created to develop composite materials, in 1997.

From 1997 to 2018, Frédérique MUTEL, President of JEC Group, made a major contribution to the composites industry. Her pioneering and unifying work helped to secure the international exposure of this industry.

Contact Frédérique MUTEL
Email: frederique.mutel@orange.fr
Tel: +33 6 80 70 78 71

More information:
Composites JEC Group
Source:

AGENCE APOCOPE