From the Sector

Reset
2 results
JEC Summit Sports & Health - Connect exceeds goals and sets new standards for JEC digital events
JEC Summit Sports & Health - Connect
15.12.2020

JEC Summit Sports & Health - Connect exceeds goals and sets new standards for JEC digital events

First edition of JEC Summit Sports & Health – Connect, an online event platform devoted to medical and sports equipment manufacturers using composites, ended last week going above and beyond its set goals. JEC Summit Sports & Health – Connect brought together professionals from the whole composites value chain and allows decision-makers to evolve and inspire through a subsequent event program. This summit was the first in a long line of events devoted to composites in the Sports and Health industry that are to come within the next two years.

The three-day event was conceived as a forum to gather composites professionals, affiliates, and high-profile speakers to share their expertise in composites materials involved in creating state-of-the-art medical devices and sports equipment.

First edition of JEC Summit Sports & Health – Connect, an online event platform devoted to medical and sports equipment manufacturers using composites, ended last week going above and beyond its set goals. JEC Summit Sports & Health – Connect brought together professionals from the whole composites value chain and allows decision-makers to evolve and inspire through a subsequent event program. This summit was the first in a long line of events devoted to composites in the Sports and Health industry that are to come within the next two years.

The three-day event was conceived as a forum to gather composites professionals, affiliates, and high-profile speakers to share their expertise in composites materials involved in creating state-of-the-art medical devices and sports equipment.

“Following the enforced postponement of many trade shows, we took the step of becoming the first organizer to stage an online event dedicated to composites in the sports and health industry. We put together a high-level conference agenda and speaker roster, and devised some great ideas for virtual networking, said Christian Strassburger, Event Director at JEC Group. “I could not be prouder of what we achieved with many delegates from Europe and Americas tuning in, including representatives from more than 36 countries. I would also like to take this opportunity to thank all our sponsors and partners. Their trust, support, and input were a crucial part of both the quality and success of the summit.”

The event attracted an audience of more than 1,100 professionals from the composites industry, from 36 countries, and helped organize 216 pre-arranged one to one meetings between buyers and sellers via our dedicated online meeting rooms, this without mentioning informal networking between participants. It reached these numbers, as participants logged on in considerable numbers to learn from the insights and ideas of the unparalleled line-up of high-level speakers who took part in the summit’s twenty-track conference.

The agenda for the JEC Summit Sports & Health – Connect featured tracks on current trends and Innovations in sports & health composite applications, with keynotes delivered by Dominic LeBlanc Senior Concept Engineer, at Callaway Golf, Christophe Lecomte, Director of Biomechanical Solutions R&D, at Össur, Fleur Jong, Professional Sprinter, and Co-founder of the Para Athletics Foundation and Damiano Salvatori, Materials Research Engineer, at the Straumann Group.

The panel of high-profile experts from Europe and America offered perspectives and inspiration for the next generation of medical and sports devices made of composites materials. The line-up included Bjorn Ivar Austrem, Technical Director, at Madshus, Laurine Calistri, Research Engineer, at Proteor, Anatole Gilliot, CEO of Suprem, Julien Duplay, Composites Methods Engineer, at Decathlon, Eric Jackson, President of Apex Watercraft, Stéphan Vérin, General Secretary, at EuraMaterials, Maximilian Segl, Principal Expert Composites, and Johannes Wölper, Development Engineer, both from Ottobock, and Matthew Dickinson, Senior Lecturer in Engineering, at University of Central Lancashire. Christos Karatzias, at Mitsui Chemicals Europe and Anthony Bert, at Helicoid Industries.

And one cannot omit the international startups that pitched all through the three-day event: ProsFit (Bulgaria), Alchemy (Greece), moi composites (Italy), Mercuris (Germany), Arevo/Superstrata (USA), Checkerspot/WNDR Alpine (USA), Ambrocio (Finland) Nairoby (Argentina). All gave inspiring and promising perspectives in the sector and what to look for in the near future.

Source:

JEC Press Relations

13.11.2020

The AVK presents its awards virtually for the first time

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

3rd Place: “Fireproof composite metal hybrid structure – LEO® fire protection sandwich with integrated Hyconnect steel-glass hybrid connector” – developed by SAERTEX GmbH & Co. KG and Hyconnect GmbH.*

Category “Innovative Processes”
1st Place: “Robotised Injection Moulding (ROBIN)” – developed by Robin, Dresden with the Institute for Lightweight Engineering and Polymer Technology at the TU Dresden*

2nd Place: “Omega stringer from the roll” – developed by the German Aerospace Center, Braunschweig*

3rd Place: “Hybrid die-casting – manufacturing of intrinsic CFRP-aluminium composite structures in aluminium high-pressure die-casting” – developed by Faserinstitut Bremen e. V. with Fraunhofer IFAM, Bremen*

Category “Research and Science”:
1st Place: “New high-temperature resistant UP resins and toughening agents” – developed by Münster University of Applied Sciences with BASF SE Global New Business Development, Leibniz Institute for Polymer Research e. V., Saertex multicom GmbH*

2nd Place: “Scientific basis for the industrial application of the thermoplastic resin transfer moulding (T-RTM) process” – developed by Fraunhofer Institute for Chemical Technology ICT, Pfinztal*

3rd Place: “The material- and energy-efficient production of turbine struts by the integrative combination of thermoset fibre reinforced materials” – developed by the Institute of Polymer Technology, University of Erlangen-Nuremberg with the German Aerospace Center, Gubesch Group, Schmidt WFT, Siebenwurst, Raschig.

Award ceremony on the Internet for the first time
For the first time, due to the Covid-19 pandemic, the award ceremony took place as an online event on 12 November 2020. Many of the award winners’ innovations will be presented again in this year’s AVK Innovation Award brochure. This will be available online: https://www.avk-tv.de/innovationaward.php

 

*Please see attached document for more information.

 

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V