From the Sector

Reset
9 results
29.10.2019

Rieter Investor Update 2019

  • Order intake of CHF 524.5 million after nine months
  • Order intake for a major project from Egypt booked in October 2019
  • Market situation remains challenging
  • Real estate sale in Ingolstadt successfully completed
  • Outlook 2019

The cumulative order intake recorded by Rieter Group in the first nine months of 2019 of CHF 524.5 million (2018: CHF 749.8 million) was down by 30% compared to the prior-year period. In the third quarter of 2019, order intake was CHF 146.2 million (Q3 2018: CHF 238.0 million).

Order Intake for a Major Project from Egypt Booked
On October 7, 2019, Rieter booked the order intake for the first six projects with Cotton & Textile Industries Holding Company, Cairo (Egypt) of around CHF 165 million. This amount is thus not included in the figures for the third quarter of 2019 and will positively affect the fourth quarter. The sales are anticipated to be realized in the 2020/2021 financial years. The order includes deliveries of compact and ring spinning systems and it is part of a comprehensive modernization program for the Egyptian textile industry.

  • Order intake of CHF 524.5 million after nine months
  • Order intake for a major project from Egypt booked in October 2019
  • Market situation remains challenging
  • Real estate sale in Ingolstadt successfully completed
  • Outlook 2019

The cumulative order intake recorded by Rieter Group in the first nine months of 2019 of CHF 524.5 million (2018: CHF 749.8 million) was down by 30% compared to the prior-year period. In the third quarter of 2019, order intake was CHF 146.2 million (Q3 2018: CHF 238.0 million).

Order Intake for a Major Project from Egypt Booked
On October 7, 2019, Rieter booked the order intake for the first six projects with Cotton & Textile Industries Holding Company, Cairo (Egypt) of around CHF 165 million. This amount is thus not included in the figures for the third quarter of 2019 and will positively affect the fourth quarter. The sales are anticipated to be realized in the 2020/2021 financial years. The order includes deliveries of compact and ring spinning systems and it is part of a comprehensive modernization program for the Egyptian textile industry.

Market Situation Remains Challenging
The demand for new machinery remained at a low level in the third quarter of 2019. The primary reasons are existing overcapacity in the spinning mills, the trade conflict between the USA and China, as well as political and economic uncertainties in other regions of importance to Rieter. Rieter's market share continues to be at the level of around 30%.

Real Estate Sale in Ingolstadt Successfully Completed
Rieter completed the real estate sale in Ingolstadt (Germany) to GERCHGROUP of Düsseldorf (Germany) on September 13, 2019. Rieter expects a non-recurring profit contribution from this transaction on a net profit level of around EUR 60 million.

Outlook 2019
Rieter estimates significantly lower sales for the year 2019 as a whole compared to 2018, and expects a significant drop in the result from the ongoing business. EBIT and net profit are anticipated to be significantly above the levels of the previous year due to the non-recurring profit contribution from the sale of real estate in Ingolstadt (Germany). The cost-cutting measures introduced have been implemented to a great extent.

More information:
Rieter Holding Ltd.
Source:

Rieter Holding Ltd.

Photo: Borealis
16.10.2019

Borealis launches new BorPure™ resin at the K 2019

BorPure™ RF777MO: designed for flip-top cap applications
Borealis announces the commercial launch of BorPure™ RF777MO. Based on the proprietary Borstar® Nucleation Technology (BNT), this new resin fulfils value chain demand for high-quality solutions offering excellent organoleptics. As next generation random polypropylene (PP), BorPure RF777MO has been designed for use in flip-top caps, a growing caps and closures market segment.

Next generation random PP offers excellent organoleptics
The rapidly evolving caps and closures industry must respond to a broad and diverse set of requirements from all sides. Converters demand innovative material solutions that reduce energy consumption and help increase productivity on injection moulding lines. Resins must offer easy processability, consistency, high quality, and provide optimal performance on the capping line. For brand owners and final consumers, caps and closures must secure package contents, provide ideal organoleptic properties, safety, and convenience. They must also stand out on the retail shelf and, increasingly, offer the lowest possible environmental footprint.

BorPure™ RF777MO: designed for flip-top cap applications
Borealis announces the commercial launch of BorPure™ RF777MO. Based on the proprietary Borstar® Nucleation Technology (BNT), this new resin fulfils value chain demand for high-quality solutions offering excellent organoleptics. As next generation random polypropylene (PP), BorPure RF777MO has been designed for use in flip-top caps, a growing caps and closures market segment.

Next generation random PP offers excellent organoleptics
The rapidly evolving caps and closures industry must respond to a broad and diverse set of requirements from all sides. Converters demand innovative material solutions that reduce energy consumption and help increase productivity on injection moulding lines. Resins must offer easy processability, consistency, high quality, and provide optimal performance on the capping line. For brand owners and final consumers, caps and closures must secure package contents, provide ideal organoleptic properties, safety, and convenience. They must also stand out on the retail shelf and, increasingly, offer the lowest possible environmental footprint.

More information:
Borealis
Source:

Borealis AG

(c) Borealis
16.10.2019

Borealis and Brouge offer monomaterial solutions for demanding consumer packaging applications

New polyethylene and polypropylene-based monomaterial pouch solutions developed in value-chain collaboration

Borealis and Borouge have developed a series of new, monomaterial pouch solutions based on polyethylene (PE) and polypropylene (PP). Designed specifically for recycling, and in collaboration with value-chain partners, these new pouch solutions are suitable for the most demanding consumer packaging applications. In line with the EverMinds™ approach to Thinking Circular, these solutions further expand the range of more sustainable options available to the flexible packaging industry. Several of the pouches will be showcased at the K 2019 in October, including one exemplar containing 35% post-consumer recyclate (PCR).

New polyethylene and polypropylene-based monomaterial pouch solutions developed in value-chain collaboration

Borealis and Borouge have developed a series of new, monomaterial pouch solutions based on polyethylene (PE) and polypropylene (PP). Designed specifically for recycling, and in collaboration with value-chain partners, these new pouch solutions are suitable for the most demanding consumer packaging applications. In line with the EverMinds™ approach to Thinking Circular, these solutions further expand the range of more sustainable options available to the flexible packaging industry. Several of the pouches will be showcased at the K 2019 in October, including one exemplar containing 35% post-consumer recyclate (PCR).

More information:
Borealis
Source:

Borealis AG

(c) Chomarat
09.10.2019

Chomarat fabrics at the KraussMaffei booth during K Messe 2019

Chomarat Group’s composite reinforcements will be featured at the KraussMaffei stand during the next K Messe in Düsseldorf. Chomarat has created a glass reinforcement adapted to the mass production of automotive parts, helping to lighten leaf springs by 60% compared to metal.

Automotive: Producing 60% lighter leaf springs for car's underbody
The new leaf springs made of composites are 60% lighter than their pendants made of steel thanks to KraussMaffei process and the involvement of a network of partners, including Chomarat with G-PLY™ glass reinforcement. Their strength can be deliberately increased in sections where it is required and the corrosion resistance offers further added value.

Chomarat Group’s composite reinforcements will be featured at the KraussMaffei stand during the next K Messe in Düsseldorf. Chomarat has created a glass reinforcement adapted to the mass production of automotive parts, helping to lighten leaf springs by 60% compared to metal.

Automotive: Producing 60% lighter leaf springs for car's underbody
The new leaf springs made of composites are 60% lighter than their pendants made of steel thanks to KraussMaffei process and the involvement of a network of partners, including Chomarat with G-PLY™ glass reinforcement. Their strength can be deliberately increased in sections where it is required and the corrosion resistance offers further added value.

“We created the fabrics, when Engenuity developed the component, Huntsman supplied the matrix system made of epoxy resin, Johns Manville supplied the glass fibers, Schmidt & Heinzmann manufactured the preforms, Alpex designed the RTM mold and Hufschmied (Bobingen, Germany) took charge of post-mold processing of the component by milling. KraussMaffei has taken over the project management for Hengrui and coordinates the project with the partners.” Francisco De Oliveira at Chomarat explains.

More information:
CHOMARAT K 2019
Source:

AGENCE APOCOPE

(c) BASF 3D Printing Solutions GmbH
07.10.2019

BASF 3D Printing Solutions Presented Cutting-Edge Manufacturing Solutions at K 2019

  • Comprehensive 3D printing expertise in the automotive, aerospace, consumer goods and medical application sectors
  • Hands-on application presentation with a leading RV and trailer manufacturer
  • Content-rich Live Talks with industry-leading business partners
  • Live demonstration of pigmented plastic filaments with BASF Colors & Effects

BASF 3D Printing Solutions (B3DPS) exhibited for the second time at K 2019 in Düsseldorf, Germany. At the world’s biggest trade show for plastics and rubber industry, B3DPS welcomed visitors from October 16 through 23 at the BASF SE stand C21/D21 in Hall 5 and presented its extensive portfolio of 3D printing materials and service solutions aiming at enabling industrial additive manufacturing at scale. What’s more, the company’s 3D printing experts did offer insights into the latest technological innovations and application developments in the “competencies” section.

  • Comprehensive 3D printing expertise in the automotive, aerospace, consumer goods and medical application sectors
  • Hands-on application presentation with a leading RV and trailer manufacturer
  • Content-rich Live Talks with industry-leading business partners
  • Live demonstration of pigmented plastic filaments with BASF Colors & Effects

BASF 3D Printing Solutions (B3DPS) exhibited for the second time at K 2019 in Düsseldorf, Germany. At the world’s biggest trade show for plastics and rubber industry, B3DPS welcomed visitors from October 16 through 23 at the BASF SE stand C21/D21 in Hall 5 and presented its extensive portfolio of 3D printing materials and service solutions aiming at enabling industrial additive manufacturing at scale. What’s more, the company’s 3D printing experts did offer insights into the latest technological innovations and application developments in the “competencies” section.

Customized 3D printing highly attractive to RV and trailer market
The Concept Caravan at the BASF stand gave visitors hands-on experience of the impressive spectrum of applications offered by B3DPS. Alongside complex samples of printed modular construction elements, over one hundred individual parts have been 3D-printed using advanced photopolymer, filament and powder-based ready-to-print material formulations. The RV and trailer market is exceptionally attractive as it can greatly benefit from unique advantages offered by additive-based manufacturing, namely the high customizability of parts with complex geometries as well as the rapid availability of production parts without incurring tool costs. The very diverse material characteristics of the construction elements meet the production requirements for both vehicle exteriors and interior fittings. In addition, the final coating of manufactured parts plays a decisive role in many application areas, and this is also covered by the comprehensive BASF technology portfolio.

Source:

BASF 3D Printing Solutions GmbH

23.09.2019

Tape inserts offer big potential for injection molding parts

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

Market and technology analysis confirms big potential for tape inserts in the injection molding process. Following the finalization of a major consortial project led by the Aachen Center for Integrative Lightweight Production (AZL) and the Institute for Plastics Processing at RWTH Aachen University (IKV), the result is clear: tape inserts offer enormous potential for injection molding parts. For suitable components, product costs and component properties can be positively influenced.

In cooperation with 20 industrial partners, the two renowned Aachen research institutes AZL and IKV carried out a detailed analysis of tape inserts in injection molded components over a period of eight months. The tapes, which are a few tenths of a millimeter thick, are continuous fibers, typically made of glass or carbon, completely impregnated and embedded in a thermoplastic matrix. The tapes can be precisely aligned to the loads in a component and are used primarily in high-performance applications with the aim of weight reduction. The aim of the conducted analysis was the identification of potential applications and the estimation of a wider range of applications.

The project was divided into several phases: Phase I was used to identify the current status. In 20 interviews with representative companies of the injection molding industry, the researchers gathered why tape inserts have rarely been taken into account so far, when defining the material concepts to be analyzed. The lack of information about the material class, the procedure and tools for the development process and the necessary production technologies were cited as major challenges. This is where the consortium will take action and provide comprehensive information during the “Technology Information Day” on the extensively prepared state of the art and the high degree of maturity of the supply chain. Based on the status quo, they developed a methodology for analyzing the technological and economic potential of tape inserts in injection molding applications.

Both the previous results and the planned follow-up projects are the subject of the “Technology Information Day" at K 2019, to which the companies involved in the study, the AZL and IKV, invite all companies along the value chain, from raw material manufacturers to injection molders to OEMs. (Date: 18th October 2019, 10:00 am to 1:30 pm, Trade Fair Düsseldorf CCD South, Room 002).

The consortium, amongst others consisting of Asahi Kasei Europe GmbH, BASF SE, Borealis AG, BÜFA Thermoplastic Composites GmbH & Co. KG, ENGEL AUSTRIA GmbH, Huesker Synthetic GmbH, LG Hausys R&D Center, Mitsui Chemicals, Nippon Electric Glass, Polyscope Polymers BV, POLYTEC GROUP, Simcon kunststofftechnische Software GmbH, SABIC and Toray International Europe GmbH, is inviting to the “Technology Information Day” at K 2019. The goal is to inform about the technology and to identify topics for future collaboration.

Source:

AZL Aachen GmbH

Mit hoher Schweißnahtfestigkeit und Langzeit-Temperaturbeständigkeit bis 230°C bietet Vydyne® XHT die richtigen Leistungseigenschaften für Bauteile im Motorraum, wie integrierte Lufteinlassverteiler. (c) Ascend Performance Materials APMPR038
Mit hoher Schweißnahtfestigkeit und Langzeit-Temperaturbeständigkeit bis 230°C bietet Vydyne® XHT die richtigen Leistungseigenschaften für Bauteile im Motorraum, wie integrierte Lufteinlassverteiler.
17.09.2019

Ascend stellt seine neuen Produkte Vydyne® XHT, LCPA und HTPA auf der K 2019 vor

HOUSTON – Ascend Performance Materials kündigte heute die Markteinführung mehrerer neuer Spezial-Polyamide auf der K 2019 an, um den wachsenden Anforderungen seiner Kunden zu begegnen. Unter den neuen Produkten befinden sich langkettigen Polyamide, Vydyne® XHT und neue hochtemperatur Polyamide.

Vydyne XHT, ein neues Portfolio aus hitzestabilisiertem Polyamid 66 und Copolymeren, ist widerstandsfähig gegenüber Langzeittemperaturen von bis zu 230°C. Durch eine Kombination aus speziellen Polymerverbindungen und einer mehrstufigen Wärmestabilisierungstechnologie erweitern XHT-Produkte die Grenzen der Temperaturbeständigkeit – ohne Einbußen bei der Verarbeitbarkeit, Beständigkeit und den mechanischen Eigenschaften, für die PA66 bekannt ist.

„Bei Motoren mit unterschiedlichen Leistungen und Drehmomenten, sind konstante Werte bei hohen Temperaturen für Anwendungen unter der Motorhaube unverzichtbar“, so Vikram Gopal, Senior Vice President für Technologie bei Ascend. „Vydyne XHT wurde von uns entwickelt, um unseren Kunden, die sich heute mit unzureichender Leistung in einem engen Betriebsbereich begnügen müssen, eine Alternative zu bieten.“

HOUSTON – Ascend Performance Materials kündigte heute die Markteinführung mehrerer neuer Spezial-Polyamide auf der K 2019 an, um den wachsenden Anforderungen seiner Kunden zu begegnen. Unter den neuen Produkten befinden sich langkettigen Polyamide, Vydyne® XHT und neue hochtemperatur Polyamide.

Vydyne XHT, ein neues Portfolio aus hitzestabilisiertem Polyamid 66 und Copolymeren, ist widerstandsfähig gegenüber Langzeittemperaturen von bis zu 230°C. Durch eine Kombination aus speziellen Polymerverbindungen und einer mehrstufigen Wärmestabilisierungstechnologie erweitern XHT-Produkte die Grenzen der Temperaturbeständigkeit – ohne Einbußen bei der Verarbeitbarkeit, Beständigkeit und den mechanischen Eigenschaften, für die PA66 bekannt ist.

„Bei Motoren mit unterschiedlichen Leistungen und Drehmomenten, sind konstante Werte bei hohen Temperaturen für Anwendungen unter der Motorhaube unverzichtbar“, so Vikram Gopal, Senior Vice President für Technologie bei Ascend. „Vydyne XHT wurde von uns entwickelt, um unseren Kunden, die sich heute mit unzureichender Leistung in einem engen Betriebsbereich begnügen müssen, eine Alternative zu bieten.“

Das Portfolio von Vydyne XHT umfasst vier glasgefüllte Typen, die sich optimal für anspruchsvolle Anwendungen im Automobilbereich wie Ladeluftkühler, Luftansaugkrümmer, Abgasrückführung und Resonatoren eignen. Alle XHT-Typen bieten ein ausgezeichnetes Fließverhalten und eignen sich als Regranulat, wodurch überschüssiges Material wiederaufbereitet und die Produktionseffizienz gesteigert werden kann.

Ascend stellt außerdem ein neues Produktportfolio aus den langkettigen Polyamiden PA610 und PA612 vor. Mit ihrer geringen Feuchtigkeitsaufnahme und einer hohen Beständigkeit gegenüber Chemikalien und UV-Strahlung eignen sich die langkettigen Polyamiden für eine Vielzahl von Anwendungen, darunter Monofilamente, Batterieabdichtungen, Kabelbinder, Automobilkühlsysteme, Kraftstoffanschlüsse sowie Sportartikel.

„Unsere Kunden sind Innovationstreiber und sehen steigende Anforderungen in ihren jeweiligen Branchen“, so Phil McDivitt, Präsident und Vorstandsvorsitzender bei Ascend. „Für größte Zuverlässigkeit, Funktionalität und Flexibilität bauen wir unsere vertikale Integration und starke Stellung im Bereich PA66 aus, um diese Innovationen zu ermöglichen“.

Zusätzlich werden die Aktivitäten des Unternehmens im Bereich der Hochtemperatur-Polyamide ausgebaut. Die neuen Produkte des HTPA-Portfolios von Ascend bieten als Metallersatz und für Hochtemperaturanwendungen im Automobilbereich höhere Festigkeit, Steifigkeit und Temperatur- und Chemikalienbeständigkeit.

Auf der vom 16. bis 23. Oktober in Düsseldorf stattfindenden K 2019 werden Vertriebs, als auch technische Expertern am Stand von Ascend (6A07) anwesend sein.

Sappi (c) Sappi
18.07.2019

Sappi: Innovation meets sustainability

Sappi to present its innovative papers and packaging solutions at FachPack 2019

Environmentally friendly packaging is a hot topic worldwide. Sappi has been a pioneer in the field of innovative and sustainable packaging solutions for years. The company will present its latest innovations at Stand 9-260 at FachPack in Nuremberg. Alongside barrier papers, these include the heat-sealable Sappi Seal paper. This is notable for being completely recyclable and can replace existing PE-coated packaging. The recently launched Atelier paperboard will be another focus of the trade fair presentation. This offers brilliant colour reproduction and a silky touch and feel.

Sappi to present its innovative papers and packaging solutions at FachPack 2019

Environmentally friendly packaging is a hot topic worldwide. Sappi has been a pioneer in the field of innovative and sustainable packaging solutions for years. The company will present its latest innovations at Stand 9-260 at FachPack in Nuremberg. Alongside barrier papers, these include the heat-sealable Sappi Seal paper. This is notable for being completely recyclable and can replace existing PE-coated packaging. The recently launched Atelier paperboard will be another focus of the trade fair presentation. This offers brilliant colour reproduction and a silky touch and feel.

More information:
Sappi FachPack
Source:

RUESS PUBLIC T GMBH

Borealis launches recycling technology Borcycle™ and new rPO compound at K 2019 © mtm plastics
25.06.2019

Borealis launches recycling technology Borcycle™ and new rPO compound at K 2019

  • Borealis’ EverMinds™ ambition moves industry one step closer to plastics circularity thanks to new recycling technology and improved recyclate
  • Borealis also announces significant material improvements to existing Purpolen® recyclate materials

Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the introduction of a new plastics recycling technology, Borcycle™. This evolving technology will be used to produce high-quality compounds made of recycled polyolefins (rPO) such as the newly-launched Borcycle™ MF1981SY, an rPO with over 80% recycled content intended for use in visible appliance parts. Borealis also announces a series of significant material improvements to existing recyclates in the established Purpolen™ brand portfolio. These market launches and product improvements are important technology advancements and thus accelerate the transformation to a circular economy of plastics. Borealis and its wholly-owned subsidiary, mtm plastics, will showcase the new Borcycle technology and recyclate innovations at the K 2019 in October.

  • Borealis’ EverMinds™ ambition moves industry one step closer to plastics circularity thanks to new recycling technology and improved recyclate
  • Borealis also announces significant material improvements to existing Purpolen® recyclate materials

Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the introduction of a new plastics recycling technology, Borcycle™. This evolving technology will be used to produce high-quality compounds made of recycled polyolefins (rPO) such as the newly-launched Borcycle™ MF1981SY, an rPO with over 80% recycled content intended for use in visible appliance parts. Borealis also announces a series of significant material improvements to existing recyclates in the established Purpolen™ brand portfolio. These market launches and product improvements are important technology advancements and thus accelerate the transformation to a circular economy of plastics. Borealis and its wholly-owned subsidiary, mtm plastics, will showcase the new Borcycle technology and recyclate innovations at the K 2019 in October.

Borealis is leading the industry by applying its Visioneering Philosophy™ to the development and implementation of novel polyolefins-based solutions that enable plastics reuse, recycling, and recovery, and by designing for circularity. These wide-ranging activities are gathered under the symbolic roof of EverMinds™, the Borealis platform dedicated to promoting a more circular mind-set in the industry. By capitalising on its profound expertise in virgin polyolefins and collaborating with value chain partners, Borealis keeps discovering new opportunities for business growth within the circular economy.

Advancing technology to bring about polyolefin circularity

The new technology, Borcycle, transforms polyolefin-based waste streams into recyclate material such as pellets. As a transformative technology, it complements the existing Borealis virgin polyolefins portfolio with a range of pioneering, circular solutions. It unites state-of-the-art technology with the profound Borealis polymer expertise gained over decades.

As a scalable and modular technology, Borcycle has been developed to meet growing market demand for high-quality recyclate. Leading appliance brand owners, for one, have pledged to increase the amount of recycled plastics in their goods. Yet until recently, producers have not been able to rely on a consistent supply of high-quality recyclate. The Borcycle technology will help address this challenge. Compounds made using the Borcycle technology deliver high performance, add value and offer versatility. Producers and brand owners in a range of industries will profit from the availability of high-quality recyclate that helps them meet environmental and regulatory challenges.

“Advancing technology is crucial if our aim is to implement value-creating solutions in the circular sphere,” claims Maurits van Tol, Borealis Senior Vice President, Innovation, Technology & Circular Economy Solutions. “‘Building tomorrow together’ means innovating, collaborating, focussing on the customer, and above all – taking action. The launch of our new recycling technology Borcycle is tangible proof of our commitment to achieving plastics circularity.”

New and improved recyclate for high-end applications

Borcycle™ MF1981SY is the first of several upcoming launches of rPO solutions made under the umbrella of the Borcycle technology. Borcycle™ MF1981SY will be available to Borealis customers in Europe. The compound is an exciting addition to the rPO portfolio because it is a 10% talc-filled compound that contains over 80% recycled material. It offers an ideal balance between stiffness and impact. The compound is especially suited for use in visible black parts, for example in small appliances.

Like its relatives in the mtm plastics family of recyclate materials, Borcycle™ MF1981SY is a truly sustainable offering. Recyclates from mtm save approximately 30% of CO2 emissions compared to virgin materials.

A number of significant improvements have been made to existing recyclate grades in the Purpolen portfolio.

“Mechanical recycling is presently a most eco-efficient method to implement the principles of the circular economy,” explains Guenter Stephan, Head of Mechanical Recycling, Borealis Circular Economy Solutions. “Borealis and mtm plastics are leveraging their respective areas of expertise to make significant progress in achieving polyolefin circularity by upscaling recycling output and ensuring the reliable supply of high-quality plastics recyclate for European producers, in particular.”

More information:
Recycling Borealis Borcycle
Source:

  Borealis AG