From the Sector

Reset
401 results
23.08.2022

Lenzing: Transition to green electricity in Indonesia

  • Gradual transformation of production capacities to LENZING™ ECOVERO™ and VEOCEL™ branded specialty viscose

The Lenzing Group, provider of wood-based specialty fibers, is expanding its global clean electricity portfolio and transitioning its production site in Purwakarta to green electricity. The Indonesian subsidiary PT. South Pacific Viscose (SPV) has been using electricity generated solely from renewable sources since July this year, which will reduce its specific carbon emissions by 75,000 tonnes annually.

In 2019, Lenzing became the first fiber producer to set a target of halving its carbon emissions by 2030 and becoming climate neutral by 2050. This carbon reduction target has been recognized by the Science Based Targets Initiative. In Purwakarta, Lenzing is currently investing in the reduction of carbon emissions, as well as air and water emissions. Thanks to its EUR 100 million investment in this area, Lenzing is gradually transitioning its existing capacities for standard viscose to LENZING™ ECOVERO™ and VEOCEL™ branded specialty viscose.

  • Gradual transformation of production capacities to LENZING™ ECOVERO™ and VEOCEL™ branded specialty viscose

The Lenzing Group, provider of wood-based specialty fibers, is expanding its global clean electricity portfolio and transitioning its production site in Purwakarta to green electricity. The Indonesian subsidiary PT. South Pacific Viscose (SPV) has been using electricity generated solely from renewable sources since July this year, which will reduce its specific carbon emissions by 75,000 tonnes annually.

In 2019, Lenzing became the first fiber producer to set a target of halving its carbon emissions by 2030 and becoming climate neutral by 2050. This carbon reduction target has been recognized by the Science Based Targets Initiative. In Purwakarta, Lenzing is currently investing in the reduction of carbon emissions, as well as air and water emissions. Thanks to its EUR 100 million investment in this area, Lenzing is gradually transitioning its existing capacities for standard viscose to LENZING™ ECOVERO™ and VEOCEL™ branded specialty viscose.

“Demand for our wood-based, biodegradable specialty fibers is constantly rising. We see enormous growth potential, especially in Asia. The switch to green, renewable electricity marks a huge step forward in converting our Indonesian site into a specialty fiber supplier. This makes us better positioned to meet the growing demand for sustainably produced fibers,” comments Robert van de Kerkhof, Chief Commercial Officer for Fiber at Lenzing.


The company aims to generate more than 75 percent of its fiber revenue from the wood-based, biodegradable specialty fibers business under the TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ brands by 2024. With the launch of the lyocell plant in Thailand in March 2022 and the investments in existing production sites in Indonesia and China, the share of specialty fibers in Lenzing’s fiber revenue is set to exceed the 75 percent target by a significant margin as early as 2023.

Source:

Lenzing AG

Photo: Mark Stebnicki, pexels
16.08.2022

USDA presents new study of Chinese Cotton Textile Industry

  • Growing geographic separation between cotton production and textile manufacturing since the 1990s

The United States Department of Agriculture (USDA) released a comprehensive study about Chinese cotton in August 2022. The authors, Fred Gale and Eric Davis, concentrate on textiles, imports and Xinjiang.

China is the world’s largest textile manufacturer and the largest cotton consumer, but changes in China’s economy are reshaping the geography of its cotton-textile sector. Nearly all of China’s cotton is produced in the Xinjiang Uyghur Autonomous Region (XUAR), also known more simply as Xinjiang.

  • Growing geographic separation between cotton production and textile manufacturing since the 1990s

The United States Department of Agriculture (USDA) released a comprehensive study about Chinese cotton in August 2022. The authors, Fred Gale and Eric Davis, concentrate on textiles, imports and Xinjiang.

China is the world’s largest textile manufacturer and the largest cotton consumer, but changes in China’s economy are reshaping the geography of its cotton-textile sector. Nearly all of China’s cotton is produced in the Xinjiang Uyghur Autonomous Region (XUAR), also known more simply as Xinjiang.

Their study reviewed the regional patterns of China’s cotton textile industry development and identified growing geographic separation between cotton production and textile manufacturing since the 1990s using data from Chinese sources. The study investigated spatial patterns of demand for imported cotton by analyzing lists of Chinese companies applying for a share of the import quota from 2016 to 2022. Multiple regression analysis was used to control for potentially confounding influences when investigating whether companies in coastal provinces were more likely to use imported cotton than similarly sized companies in other regions.

Textile manufacturers — the main consumers of cotton — are concentrated in coastal and central regions where the share of China’s cotton production fell from over 50 percent to 10 percent during 2011–21. These geographic changes are a factor influencing global trade in cotton and textiles. Additionally, the use of forced labor in Xinjiang attracted more attention to the industry, prompting the United States and other countries to ban products produced in the region.

This study reviews the economic, geographic, and policy factors reshaping the industry and influencing the global trade of cotton and textile products. The study also examines data on Chinese companies applying for a share of China’s cotton import quota to gain insight about the demand for imported cotton.

China became the world’s largest producer, consumer, and importer of cotton soon after joining the World Trade Organization (WTO) in 2001. Despite adopting a tariff-rate quota (TRQ) system for cotton imports and issuing supplemental quotas in most years, the large number of cotton goods manufacturers that request shares of the quota suggests demand for imported cotton exceeds  the quota.

While the TRQ was intended to protect China’s cotton farmers, many farmers abandoned the labor-intensive crop as wages rose rapidly in many other industries and other crops produced higher returns. In response, officials encouraged cotton production in the relatively remote region of Xinjiang to prevent China from becoming reliant on imported cotton. Xinjiang growers receive a subsidy payment for cotton, and subsidies for machinery and seeds. A transportation subsidy induces textile manufacturers in eastern and central regions to purchase cotton from Xinjiang, which is about 2,200 to 2,900 miles from most of the country’s textile manufacturers. Financial support and other incentives encourage manufacturers to shift operations to Xinjiang.

Textile manufacturers in China are highly interested in importing cotton due to its lower price and quality. China imports about 20 percent of its cotton, and the United States is a chief exporter of cotton to China. While imported cotton is used in all provinces, manufacturers near the eastern seaboard show a greater propensity for imports. Nevertheless, in all regions, domestic cotton has the largest share of mill use.

Between 2016 and 2022, 1,581 companies applied for a share of the TRQ, and 265 companies applied in all 7 years. Most of these companies also applied for supplemental quotas issued with slightly higher tariffs. This large number of applicants suggests that imports could be even greater if quotas did not limit them. The operation of the quota application process is not public information, but data submitted by applicants suggests access to imported cotton is uneven. About 14 percent of applicants said imported cotton comprised over half of the cotton they used. Another 20 percent of companies requesting import quota did not use any imported cotton, suggesting that many applicants are unable to import. Textile manufacturers coped with limits on cotton imports by increasing their use of synthetic, chemical-based fibers or by importing cotton yarn. From 2000 to 2020, China’s yarn imports doubled from under 1 million metric tons to around 2 million metric tons with Vietnam supplying about 45 percent of that total in 2020.

The number of textile manufacturers in Xinjiang applying for a share of the cotton import quota rose from 37 to 68 between 2016 and 2022. However, imports constituted less than 2 percent of  the cotton Xinjiang applicants reported using—and 66 percent of them reported using no imported cotton—suggesting that applications from Xinjiang textile companies were often denied.
Analysis found that applicants in coastal provinces used more imported cotton than similarly sized applicants in other regions. Each location of a multi-plant company must apply separately for tariff-rate quotas. Textile manufacturers in Xinjiang that requested a share of the import quota included branches of some of China’s largest textile companies, but the analysis found that Xinjiang applicants used less imported cotton than similar manufacturing plants located in other regions. China’s role as a cotton importer appears to have peaked, while other countries are increasing their share of imports.

USDA baseline projections suggest that by 2030 Vietnam, Pakistan, Indonesia, Bangladesh, and Turkey will together account for 47 percent of the world’s cotton imports while China will only account for 24 percent. The study cam be downloaded from the USDA website.

More information:
cotton Cotton USA China Xinjiang
(c) DNFI
16.08.2022

DNFI: Cotton prices the highest in a decade during 2021/22

The Discover Natural Fibres Initiative DNFI published their statistical World Natural Fibre Update this month. The world production of natural fibres is estimated at 33.7 million tonnes in 2022, a slight increase compared with a preliminary 33.3 million tonnes in 2021 and 31.6 million in 2020.

The DNFI Natural Fibre Composite Price dropped 2% in July 2022 to US 219 cents/kg, compared with US 223 cents the previous month. The DNFI Composite is an average of prices in major markets for cotton, wool, jute, silk, coir fibre, and sisal, converted to US$ per kilogram and weighted by shares of world production.

The Discover Natural Fibres Initiative DNFI published their statistical World Natural Fibre Update this month. The world production of natural fibres is estimated at 33.7 million tonnes in 2022, a slight increase compared with a preliminary 33.3 million tonnes in 2021 and 31.6 million in 2020.

The DNFI Natural Fibre Composite Price dropped 2% in July 2022 to US 219 cents/kg, compared with US 223 cents the previous month. The DNFI Composite is an average of prices in major markets for cotton, wool, jute, silk, coir fibre, and sisal, converted to US$ per kilogram and weighted by shares of world production.

  • The DNFI Composite was pulled downward primarily by a 9% decline in the Eastern Market Indicator of wool prices in Australia, which fell from US$ 10.27 per kilogram in June to US$9.38 in July.
  • October cotton ICE futures (the nearby contract) finished July marginally lower, closing at 228 US cents per kilogram, compared with 229 at the end of June.
  • Prices of jute fibre in India quoted by the Jute Balers Association (JBA) at the end of July were unchanged from a month earlier, but with depreciation of the Rupee versus the dollar, calculated prices fell from 84 cents to 82 cents per kilogram.
  • Prices of silk in China equalled US$29.5 per kilogram in July 2022, coconut coir fibre in India held at US cents 21 per kilogram, and sisal in Brazil finished July at US cents 41 per kilogram.

Cotton prices were the highest in a decade during 2021/22, and world cotton production is estimated by the International Cotton Advisory Committee at 25.8 million tonnes during the 2022/23 season which began August 1, up from 25.4 million in the season just completed. Extreme drought in Texas, the largest producing state in the United States, is limiting the rise in world production that would otherwise be occurring.

World production of jute and allied fibres is estimated unchanged at 3.2 million tonnes in 2022 compared with 2021. High market prices in 2021 motivated farmers to expand planted area in both Bangladesh and India, but dry weather in jute-growing areas during June and July has undermined earlier optimistic hopes for yields. Rainfall was approximately half of normal in the city of Kolkata from early June to mid-July.

Production of coir fibre rose by an average of 18,000 tonnes per year during the past decade, and production was record high at 1.12 million tonnes in 2021. Production is expected to remain high in 2022.

Flax has also been trending upward, rising by an average of 27,000 tonnes per year, and production in 2022 is estimated to remain above one million tonnes.
World wool production is forecast up by 5% in 2022 to 1.09 million tonnes (clean), the highest since 2018. Wetter weather in the Southern Hemisphere, following eight years of drought, is allowing farmers to rebuild herds.

More information:
natural fibers DNFI
Source:

DNFI

10.08.2022

Indorama Ventures' Results for 2Q22: Fibers segment -35% QoQ

  • Record Revenue of US$5,451M, an increase of 23% QoQ and 53% YoY
  • Record Reported EBITDA of US$1,010M, up 29% QoQ and 83% YoY
  • Reported Net Profit of THB 20.3B, an increase of 44% QoQ and 143% YoY.
  • Reported EPS of THB 3.58 (LTM2Q22: 8.11) and Core EPS of THB 2.32 (LTM2Q22:6.16)

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical producer, reported record 2Q22 earnings as the company’s global integrated model continues to benefit from strong consumer trends and management responded effectively to market disruptions.

IVL posted a record Core EBITDA of US$758 million in the second quarter, up 17% QoQ and 59% YoY. Sales revenue rose by about 11% QoQ on a same-store basis, supporting a Core EBITDA margin of 14%. The combination of strong sales and improved margins helped offset higher energy costs in the U.S. and Europe, while management leveraged the company’s leading position in local and regional markets to ensure uninterrupted customer service levels as higher crude oil prices impacted raw materials costs.

  • Record Revenue of US$5,451M, an increase of 23% QoQ and 53% YoY
  • Record Reported EBITDA of US$1,010M, up 29% QoQ and 83% YoY
  • Reported Net Profit of THB 20.3B, an increase of 44% QoQ and 143% YoY.
  • Reported EPS of THB 3.58 (LTM2Q22: 8.11) and Core EPS of THB 2.32 (LTM2Q22:6.16)

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical producer, reported record 2Q22 earnings as the company’s global integrated model continues to benefit from strong consumer trends and management responded effectively to market disruptions.

IVL posted a record Core EBITDA of US$758 million in the second quarter, up 17% QoQ and 59% YoY. Sales revenue rose by about 11% QoQ on a same-store basis, supporting a Core EBITDA margin of 14%. The combination of strong sales and improved margins helped offset higher energy costs in the U.S. and Europe, while management leveraged the company’s leading position in local and regional markets to ensure uninterrupted customer service levels as higher crude oil prices impacted raw materials costs.

Fibers segment posted Core EBITDA of US$55 million, a decrease of 35% QoQ and 15% YoY, as sales declined 11% QoQ. The segment was impacted by lower demand in the Lifestyle vertical amid the China lockdown while higher freight rates restricted exports. The Hygiene vertical was impacted by volumes at Avgol’s Russia site along with increased polypropylene prices, while strength in the replacement tires market partially offset the ongoing semiconductor shortage, resulting in a stable performance for Mobility.

Source:

Indorama Ventures Public Company Limited

10.08.2022

SGL Carbon: More capacities for graphite products for use in the semiconductor industry

  • Rising global demand for particularly high-performance silicon carbide (SiC)-based semiconductors

  • Increase in production capacities at the Shanghai (China), St. Marys (USA) and Meitingen (Germany) sites

SGL Carbon will significantly increase capacities for the production of graphite products for the semiconductor industry by 2024. As part of the investment budget for the Business Unit Graphite Solutions set out in the medium-term planning, a mid-range double-digit million euro amount will be made available for the expansion of production over the next two years. The company is thus responding to the strong growth in demand in this sector and strengthening its commitment to the global megatrend of digitalization.

  • Rising global demand for particularly high-performance silicon carbide (SiC)-based semiconductors

  • Increase in production capacities at the Shanghai (China), St. Marys (USA) and Meitingen (Germany) sites

SGL Carbon will significantly increase capacities for the production of graphite products for the semiconductor industry by 2024. As part of the investment budget for the Business Unit Graphite Solutions set out in the medium-term planning, a mid-range double-digit million euro amount will be made available for the expansion of production over the next two years. The company is thus responding to the strong growth in demand in this sector and strengthening its commitment to the global megatrend of digitalization.

The expansion program will take place in several steps over the next two years. In St. Marys, North America, and at the Chinese site in Shanghai, capacities for purification and for high-precision, computer-controlled processing of graphite components and felts will be expanded. In Meitingen (Germany), a new plant for the production of carbonized and graphitized soft felt is under construction. Further capacity expansions at various locations are being planned.

Source:

SGL CARBON SE

09.08.2022

NCTO: North Carolina Textile Executives highlight Importance of Industry

North Carolina textile executives spanning the fiber, yarn, fabric, and finished product textile industries participated in a roundtable discussion with Rep. Kathy Manning (D-NC), at which they discussed the innovative achievements and competitiveness of the domestic industry and outlined priority issues in Washington that impact their daily operations.

The roundtable discussion, hosted by Unifi Inc. and sponsored by the National Council of Textile Organizations (NCTO), was held at Unifi’s headquarters in Greensboro, North Carolina.

North Carolina is the second largest state employer of textile-related jobs, employing more than 30,000 jobs in 2021, according to U.S. government data. The state’s $2.7 billion in textile-related exports leads the nation, according to U.S. government data.

Congresswoman Manning’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $65.2 billion in output in 2021 and employed nearly 535,000 workers. The industry has been at the forefront of domestic manufacturing of over 1 billion personal protective equipment (PPE) items during the COVID-19 pandemic.

North Carolina textile executives spanning the fiber, yarn, fabric, and finished product textile industries participated in a roundtable discussion with Rep. Kathy Manning (D-NC), at which they discussed the innovative achievements and competitiveness of the domestic industry and outlined priority issues in Washington that impact their daily operations.

The roundtable discussion, hosted by Unifi Inc. and sponsored by the National Council of Textile Organizations (NCTO), was held at Unifi’s headquarters in Greensboro, North Carolina.

North Carolina is the second largest state employer of textile-related jobs, employing more than 30,000 jobs in 2021, according to U.S. government data. The state’s $2.7 billion in textile-related exports leads the nation, according to U.S. government data.

Congresswoman Manning’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $65.2 billion in output in 2021 and employed nearly 535,000 workers. The industry has been at the forefront of domestic manufacturing of over 1 billion personal protective equipment (PPE) items during the COVID-19 pandemic.

During the roundtable, North Carolina executives showcased the industry’s important contribution to the state and the U.S. economy as well as its advanced sustainability initiatives, while outlining critical policies, such as the importance of Buy American and Berry Amendment government procurement policies, maintaining strong rules of origins in free trade agreements, supporting a domestic PPE production sector, and the need to address larger systemic trade issues with China.

“In North Carolina, the textile industry is woven into the very fabric of our state and economy, with more than 33,000 workers employed in over 600 textile manufacturing facilities across the state. In Congress, I am committed to supporting our homegrown industry by making PPE in America, protecting the yarn forward rule of origin in our trade agreements, and cracking down on China’s unfair trade practices. I am thrilled to engage with industry leaders in my district, as we discuss ways to grow the U.S. textile industry and the critical role that textile manufacturers play in our local, state, and national economy,” said Congresswoman Kathy Manning.

(c) Messe Frankfurt (HK) Ltd.
08.08.2022

Deferral of Cinte Techtextil China 2022

In light of the evolving pandemic circumstances in Shanghai, Cinte Techtextil China will no longer be taking place from 6 – 8 September at the Shanghai New International Expo Centre. A new date for the technical textile fair will be announced in due course.
 
Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, explained: “After discussions with stakeholders, and in support of the government’s pandemic control measures, we have decided to postpone Cinte Techtextil China 2022 to a later date. The safety of fairgoers is of paramount importance to the fair’s ongoing success, and we are working tirelessly to provide an efficient sourcing platform for the technical textile industry. I would like to thank all participants for their sustained support and understanding.”

In light of the evolving pandemic circumstances in Shanghai, Cinte Techtextil China will no longer be taking place from 6 – 8 September at the Shanghai New International Expo Centre. A new date for the technical textile fair will be announced in due course.
 
Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, explained: “After discussions with stakeholders, and in support of the government’s pandemic control measures, we have decided to postpone Cinte Techtextil China 2022 to a later date. The safety of fairgoers is of paramount importance to the fair’s ongoing success, and we are working tirelessly to provide an efficient sourcing platform for the technical textile industry. I would like to thank all participants for their sustained support and understanding.”

Cinte Techtextil China’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry. The 2021 edition attracted 366 exhibitors and recorded 14,868 visits. The fair is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA).

Source:

Messe Frankfurt (HK) Ltd

04.08.2022

adidas with strong growth in Western markets in Q2

  • Currency-neutral sales up 4%, despite more than € 300 million negative impact from macroeconomic constraints
  • Markets representing more than 85% of the business grow 14% overall
  • Gross margin down 1.5pp to 50.3% reflecting significantly higher supply chain costs
  • Operating profit reaches € 392 million
  • Net income from continuing operations amounts to € 360 million
  • FY 2022 outlook reflects double-digit growth during the second half of the year

“Our Western markets continued to show strong momentum in the second quarter amid heightened macroeconomic uncertainty. With Asia-Pacific returning to growth, markets combined representing more than 85% of our business grew at a double-digit rate,” said adidas CEO Kasper Rorsted. “With sports back at center stage this summer, revenues in our strategic growth categories Football, Running and Outdoor all increased by double digits. However, the macroeconomic environment, particularly in China, remains challenging. The recovery in this market is – due to continued covid-19-related restrictions – slower than expected.

  • Currency-neutral sales up 4%, despite more than € 300 million negative impact from macroeconomic constraints
  • Markets representing more than 85% of the business grow 14% overall
  • Gross margin down 1.5pp to 50.3% reflecting significantly higher supply chain costs
  • Operating profit reaches € 392 million
  • Net income from continuing operations amounts to € 360 million
  • FY 2022 outlook reflects double-digit growth during the second half of the year

“Our Western markets continued to show strong momentum in the second quarter amid heightened macroeconomic uncertainty. With Asia-Pacific returning to growth, markets combined representing more than 85% of our business grew at a double-digit rate,” said adidas CEO Kasper Rorsted. “With sports back at center stage this summer, revenues in our strategic growth categories Football, Running and Outdoor all increased by double digits. However, the macroeconomic environment, particularly in China, remains challenging. The recovery in this market is – due to continued covid-19-related restrictions – slower than expected. And we have to take into account a potential slowdown in consumer spending in all other markets for the remainder of the year.”

Currency-neutral revenues increase 4% despite macroeconomic constraints
In the second quarter, currency-neutral revenues increased 4% as adidas continued to see strong momentum in Western markets. This growth was achieved despite continued challenges on both supply and demand. Supply chain constraints as a result of last year’s lockdowns in Vietnam reduced top-line growth by around € 200 million in Q2 2022. In addition, the company’s decision to suspend its operations in Russia reduced revenues by more than € 100 million during the quarter. Continued covid-19-related lockdowns in Greater China also weighed on the top-line development in Q2. From a channel perspective, the top-line increase was to a similar extent driven by the company’s own direct-to-consumer (DTC) activities as well as increases in wholesale. Within DTC, e-commerce, which now represents more than 20% of the company’s total business, showed double-digit growth reflecting strong product sell-through. From a category perspective, revenue development was strongest in the company’s strategic growth categories Football, Running and Outdoor, which all grew at strong double-digit rates. In euro terms, revenues grew 10% to € 5.596 billion in the second quarter (2021: € 5.077 billion).

Strong demand in Western markets
Revenue growth in the second quarter was driven by Western markets despite last year’s lockdowns in Vietnam still reducing sales, particularly in EMEA and North America, by
€ 200 million in total. In addition, the top-line development in EMEA was also impacted by the loss of revenue in Russia/CIS of more than € 100 million. Nevertheless, currency-neutral sales grew 7% in the region. Revenues in North America increased 21% during the quarter driven by growth of more than 20% in both DTC and wholesale. Revenues in Latin America increased 37%, while Asia-Pacific returned to growth. Currency-neutral revenues increased 3% in this market despite still being impacted by limited tourism activity in the region. In contrast, the company continued to face a challenging market environment in Greater China, mainly related to the continued broad-based covid-19-related restrictions. As a result, currency-neutral revenues in the market declined 35% during the three-months period, in line with previous expectations. Excluding Greater China, currency-neutral revenues in the company’s other markets combined grew 14% in Q2.

Operating profit of € 392 million reflects operating margin of 7.0%
The company’s gross margin declined 1.5 percentage points to 50.3% (2021: 51.8%). Significantly higher supply chain costs and a less favorable market mix due to the significant sales decline in Greater China weighed on the gross margin development. This could only be partly offset by a higher share of full price sales, first price increases and the benefits from currency fluctuations. Other operating expenses were up 19% to € 2.501 billion (2021: € 2.107 billion). As a percentage of sales, other operating expenses increased 3.2 percentage points to 44.7% (2021: 41.5%). Marketing and point-of-sale expenses grew 8% to € 663 million (2021: € 616 million). The company continued to prioritize investments into the launch of new products such as adidas’ new Sportswear collection, the next iteration of its successful Supernova running franchise and first drops related to the Gucci collaboration as well as campaigns around major events like ‘Run for the Oceans.’ As a percentage of sales, marketing and point-of-sale expenses were down 0.3 percentage points to 11.8% (2021: 12.1%). Operating overhead expenses increased by 23% to a level of € 1.838 billion (2021:
€ 1.492 billion). This increase was driven by adidas’ continuous investments into DTC, its digital capabilities and the company’s logistics infrastructure as well as by unfavorable currency fluctuations. As a percentage of sales, operating overhead expenses increased 3.5 percentage points to 32.8% (2021: 29.4%). The company’s operating profit reached a level of € 392 million (2021: € 543 million), resulting in an operating margin of 7.0% (2021: 10.7%).

Net income from continuing operations reaches € 360 million
The company’s net income from continuing operations slightly declined to € 360 million (2021: € 387 million). This result was supported by a one-time tax benefit of more than € 100 million due to the reversal of a prior year provision. Consequently, basic EPS from continuing operations reached € 1.88 (2021: € 1.93) during the quarter.

Currency-neutral revenues on prior year level in the first half of 2022
In the first half of 2022, currency-neutral revenues were flat versus the prior year period. In euro terms, revenues grew 5% to € 10.897 billion in the first six months of 2022 (2021:
€ 10.345 billion). The company’s gross margin declined 1.7 percentage points to 50.1% (2021: 51.8%) during the first half of the year. While price increases as well as positive exchange rate effects benefited the gross margin, these developments were more than offset by the less favorable market mix and significantly higher supply chain costs. Other operating expenses increased to € 4.759 billion (2021: € 4.154 billion) in the first half of the year and were up 3.5 percentage points to 43.7% (2021: 40.2%) as a percentage of sales. adidas generated an operating profit of € 828 million (2021: € 1.248 billion) during the first six months of the year, resulting in an operating margin of 7.6% (2021: 12.1%). Net income from continuing operations reached € 671 million, reflecting a decline of € 219 million compared to the prior year level (2021: € 890 million). Accordingly, basic earnings per share from continuing operations declined to € 3.47 (2021: € 4.52).

Average operating working capital as a percentage of sales slightly decreases
Inventories increased 35% to € 5.483 billion (2021: € 4.054 billion) at June 30, 2022 in anticipation of strong revenue growth during the second half of the year. Longer lead times as well as the challenging market environment in Greater China also contributed to the increase. On a currency-neutral basis, inventories were up 28%. Operating working capital increased 23% to € 5.191 billion (2021: € 4.213 billion). On a currency-neutral basis, operating working capital was up 14%. Average operating working capital as a percentage of sales decreased 0.4 percentage points to 21.0% (2021: 21.4%), reflecting an overproportional increase in accounts payable due to higher sourcing volumes and product costs.

Adjusted net borrowings at € 5.301 billion
Adjusted net borrowings amounted to € 5.301 billion at June 30, 2022, representing a year-over-year increase of € 2.155 billion (June 30, 2021: € 3.146 billion). This development was mainly due to the significant decrease in cash and cash equivalents.

FY 2022 outlook reflects double-digit growth during the second half of the year
On July 26, adidas adjusted its guidance for FY 2022 due to the slower-than-expected recovery in Greater China since the start of the third quarter resulting from continued widespread covid-19-related restrictions. adidas now expects currency-neutral revenues for the total company to grow at a mid- to high-single-digit rate in 2022 (previously: at the lower end of the 11% to 13% range), reflecting a double-digit decline in Greater China (previously: significant decline). While so far the company did not experience a meaningful slowdown in the sell-through of its products or significant cancellations of wholesale orders in any market other than Greater China, the adjusted guidance also accounts for a potential slowdown of consumer spending in those markets during the second half of the year as a result of the more challenging macroeconomic conditions. Therefore, growth in EMEA is now expected to be in the low teens (previously: mid-teens growth), while revenues in Asia-Pacific are projected to grow at a high-single-digit rate (previously: mid-teens growth). Despite the more conservative view on the development of consumer spending in the second half of the year, adidas has increased its forecasts for North America and Latin America reflecting the strong momentum the brand is enjoying in these markets. In North America, currency-neutral revenues are now expected to increase in the high teens. Sales in Latin America are projected to grow between 30% and 40% (both previously: mid- to high-teens growth).   

Due to the less favorable market mix and the impacts from initiatives to clear excess inventories in Greater China until the end of the year, gross margin is now expected to reach a level of around 49.0% (previously: around 50.7%) in 2022. Consequently, the company’s operating margin is now forecast to be around 7.0% (previously: around 9.4%) and net income from continuing operations is expected to reach a level of around € 1.3 billion (previously: at the lower end of the € 1.8 billion to € 1.9 billion range).

More information:
adidas financial year 2022
Source:

adidas

27.07.2022

Autoneum: Half Year Results 2022

Lower volumes due to geopolitical developments and the sharp rise in inflation impacted the result in the first half of 2022. In a slightly declining market, Autoneum increased revenue in local currencies by 0.5%. At CHF 888.7 million, revenue in Swiss francs reached the previous year's level. Despite the challenging environment, Autoneum achieved a positive operating result of CHF 6.4 million (EBIT margin: 0.7%). The net result decreased to CHF –12.8 million. On the other hand, Autoneum was able to generate a solid free cash flow of CHF 45.2 million. A high demand for sustainable products for electric vehicles confirms that Autoneum is well positioned for this growing market of the future.

Lower volumes due to geopolitical developments and the sharp rise in inflation impacted the result in the first half of 2022. In a slightly declining market, Autoneum increased revenue in local currencies by 0.5%. At CHF 888.7 million, revenue in Swiss francs reached the previous year's level. Despite the challenging environment, Autoneum achieved a positive operating result of CHF 6.4 million (EBIT margin: 0.7%). The net result decreased to CHF –12.8 million. On the other hand, Autoneum was able to generate a solid free cash flow of CHF 45.2 million. A high demand for sustainable products for electric vehicles confirms that Autoneum is well positioned for this growing market of the future.

Current geopolitical developments substantially affected business performance in the first half of 2022. They are accompanied by accelerating inflation and significant price increases in the commodities markets, which the war in Ukraine has further exacerbated. These developments are also delaying market recovery in the automotive industry. Autoneum does everything it can to minimize the impact on the Group. Despite the present challenges, we will continue to implement our strategy, focusing on innovative and sustainable technologies for growing markets of the future.

  • Revenue development influenced by the war in Ukraine and supply chain bottlenecks*
  • Low production volumes and high inflation impact profitability*
  • Solid free cash flow enables further reduction in net debt*
  • Business Groups*
  • Well positioned for e-mobility and sustainability*
  • Expanding the product portfolio for electric vehicles*
  • Autoneum joins the Science Based Targets initiative*

Outlook
According to global market forecasts1, automobile production will pick up again in the second half of the year with growth of 8.8% compared with the first half-year 2022. For full-year 2022, global automobile production is projected to reach 80.8 million vehicles, which is equivalent to a 4.7% increase on 2021. Based on the market forecasts, Autoneum expects to improve the operating result for the second half of the year. This will be supported by ongoing customer negotiations with a view to fair sharing of costs, the accompanying contribution of vehicle manufacturers to shouldering the sharp increases in material, energy and transport costs and the foreseeable normalization of production after the easing of lockdown measures in China. On this basis, Autoneum expects substantially enhanced results for full-year 2022, as well as an improvement in the EBIT margin to 2.0% to 3.0%. Free cash flow is expected to be in the mid to high double-digit million range for the full year 2022.

*For more information see attached document

1Source: IHS “Light Vehicle Production Forecasts” – July 15, 2022

More information:
Autoneum supply chain acoustic
Source:

Autoneum Management AG

26.07.2022

adidas adjusts outlook for 2022: Declining revenues in Greater China expected

adidas is adjusting its outlook for the financial year 2022. While second quarter results were somewhat ahead of expectations reflecting continued strong momentum in Western markets and a return to growth in Asia-Pacific, the company has been experiencing a slower-than-expected recovery in its business in Greater China since the start of the third quarter. Previously, the company had assumed that in absence of any major lockdowns as of Q3, currency-neutral revenues in the region would be flat during the second half of the year versus the prior year level. However, given the continued widespread covid-19-related restrictions, adidas now expects revenues in Greater China to decline at a double-digit rate during the remainder of the year.

adidas is adjusting its outlook for the financial year 2022. While second quarter results were somewhat ahead of expectations reflecting continued strong momentum in Western markets and a return to growth in Asia-Pacific, the company has been experiencing a slower-than-expected recovery in its business in Greater China since the start of the third quarter. Previously, the company had assumed that in absence of any major lockdowns as of Q3, currency-neutral revenues in the region would be flat during the second half of the year versus the prior year level. However, given the continued widespread covid-19-related restrictions, adidas now expects revenues in Greater China to decline at a double-digit rate during the remainder of the year.

As a result, adidas now expects currency-neutral revenues for the total company to grow at a mid- to high-single-digit rate in 2022 (previously: at the lower end of the 11% – 13% range). Because of the less favorable market mix due to lower-than-expected revenues in Greater China as well as the impact from initiatives to clear excess inventories in this market until the end of the year, the company’s gross margin is now expected to be around 49.0% in 2022 (previously: around 50.7%). Consequently, the company’s operating margin is now forecasted to be around 7.0% in 2022 (previously: around 9.4%) and net income from continuing operations is expected to reach a level of around € 1.3 billion (previously: at the lower end of the € 1.8 billion – € 1.9 billion range).

So far, the company did not experience a meaningful slowdown in the sell-through of its products or significant cancellations of wholesale orders in any other market. Nevertheless, the adjusted guidance also accounts for a potential slowdown of consumer spending in these markets during the second half of the year as a result of the more challenging macroeconomic conditions.

Despite these headwinds, adidas continues to expect double-digit revenue growth during the second half of the year for the total company. In addition to easier prior year comparables, the acceleration will be driven by adidas’ strong product pipeline, the restocking opportunity with its wholesale customers given unconstrained supply as well as the support from major sporting events.

Based on preliminary numbers, adidas’ currency-neutral revenues grew 4% during the second quarter. This increase was driven by strong double-digit growth in North America and Latin America, high-single-digit growth in EMEA (also double-digit growth excluding negative Russia/CIS impact) as well as a return to growth in Asia-Pacific. In euro terms, sales increased 10% to € 5.596 billion. The company’s gross margin declined 1.5 percentage points to a level of 50.3% and operating margin reached 7.0% during the second quarter (2021: 10.7%). Net income from continuing operations was € 360 million in Q2 (2021: € 387 million) supported by a one-time tax benefit of more than € 100 million due to the reversal of a prior year provision.

More information:
adidas financial year 2022
Source:

adidas AG

21.07.2022

NCTO: China Penalty Tariffs on finished textiles and apparel to be maintained

  • China Penalty Tariffs on Finished Textiles & Apparel Give U.S. Companies a Chance to Compete and are a Powerful Trade-Negotiation Tool, NCTO Tells U.S. International Trade Commission

Section 301 penalty tariffs on finished Chinese textile and apparel imports give American manufacturers a chance to compete and provide trade officials with an essential trade negotiation tool, the National Council of Textile Organizations (NCTO) told a key government panel today in a formal written submission. Removing them, the association said, would reward China, put U.S. manufacturers at a competitive disadvantage and do nothing to reduce inflation.

Those were among the key points outlined by NCTO President and CEO Kim Glas in a written testimony submitted to the U.S. International Trade Commission during three days of hearings on the economic impact of Section 301 China tariffs and Section 232 steel tariffs on U.S. industries.

  • China Penalty Tariffs on Finished Textiles & Apparel Give U.S. Companies a Chance to Compete and are a Powerful Trade-Negotiation Tool, NCTO Tells U.S. International Trade Commission

Section 301 penalty tariffs on finished Chinese textile and apparel imports give American manufacturers a chance to compete and provide trade officials with an essential trade negotiation tool, the National Council of Textile Organizations (NCTO) told a key government panel today in a formal written submission. Removing them, the association said, would reward China, put U.S. manufacturers at a competitive disadvantage and do nothing to reduce inflation.

Those were among the key points outlined by NCTO President and CEO Kim Glas in a written testimony submitted to the U.S. International Trade Commission during three days of hearings on the economic impact of Section 301 China tariffs and Section 232 steel tariffs on U.S. industries.

The 301 penalty tariffs should be maintained “absent substantive improvements in China’s pervasive, predatory trade practices,” Glas said in her testimony.  China’s illegal actions “have put U.S. companies at a serious disadvantage, and tariffs give American manufacturers a chance to compete.” Glas noted that U.S. trade officials have “stressed that the penalty tariffs also create leverage and are a ‘significant tool’ in ongoing negotiations with China.”
 
While some advocates for lifting the tariffs point to concerns about inflation, Glas said, “canceling these penalty duties would do little to ease Americans’ inflationary pains.” She also noted that “apparel prices out of China continue to hit rock bottom even with the Section 301 tariffs in place. As detailed in an economic study recently released by Werner International, U.S. import prices for apparel from China have dropped 25 percent since 2019 and 50 percent since 2011.”

Glas also warned that lifting the tariffs would have “a substantial negative ripple effect” on U.S. free-trade agreements, including undermining those with Western Hemisphere partners that have established shorter coproduction supply chains and serve other U.S. and regional interests.

The Section 301 tariffs were first imposed in 2018 in response to China’s persistent violations of intellectual property rules. By law, they are now under review.

More information:
NCTO Tariffs China Penalty Tariffs
Source:

National Council of Textile Organizations

19.07.2022

Rieter starts sales process for the remaining land owned by Rieter

  • Order intake of CHF 869.4 million, order backlog of more than CHF 2 100 million
  • Sales of CHF 620.6 million, preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022
  • EBIT of CHF -10.2 million, net result of CHF -25.2 million due to significant cost increases, additional costs, and acquisition-related expenses
  • Action plan to increase sales and profitability
  • Rieter site Winterthur
  • Outlook

Rieter continued to be successful in the market in the first half of 2022. Based on the company’s technology leadership, innovative product portfolio and the completion of the ring- and compact-spinning system, a high order intake and a significant increase in sales were generated. The increase in sales was achieved even though preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022. The order backlog is at a record level.

  • Order intake of CHF 869.4 million, order backlog of more than CHF 2 100 million
  • Sales of CHF 620.6 million, preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022
  • EBIT of CHF -10.2 million, net result of CHF -25.2 million due to significant cost increases, additional costs, and acquisition-related expenses
  • Action plan to increase sales and profitability
  • Rieter site Winterthur
  • Outlook

Rieter continued to be successful in the market in the first half of 2022. Based on the company’s technology leadership, innovative product portfolio and the completion of the ring- and compact-spinning system, a high order intake and a significant increase in sales were generated. The increase in sales was achieved even though preproduced deliveries in the three-digit million range had to be postponed until the second half of 2022. The order backlog is at a record level. Despite higher sales, the significant increase in material and logistics costs, additional costs for compensation of the material shortages and the expenditure incurred for the acquisition in the years 2021/2022 resulted in a loss. Rieter is implementing an action plan to increase sales and profitability. The sales process for the remaining land owned by Rieter was initiated.

Order Intake and Order Backlog
Rieter posted an order intake of CHF 869.4 million, which included CHF 176.6 million from the businesses acquired in the years 2021/2022. As expected, demand has thus returned to normal compared with the exceptionally high figure for the prior-year period, but remains well above the average figure for the last five years of around CHF 570 million (first half 2021: CHF 975.3 million, first half 2022 excluding acquisition effect CHF 692.8 million).

The regional shift in demand with investments in additional spinning capacity outside China along with investments in the competitiveness of Chinese spinning mills continues. Rieter benefits from its technology leadership, the innovative product portfolio and the completion of the ring- and compact-spinning system through the acquisition of the automatic winding machine business. The largest order intakes came from India, Turkey, China, Uzbekistan, and Pakistan.

On June 30, 2022, the company had an order backlog of more than CHF 2 100 million (June 30, 2021: CHF 1 135 million). Cancellations in the reporting period amounted to around 5% of the order backlog.

Sales
The Rieter Group posted sales of CHF 620.6 million, which included CHF 68.9 million from the businesses acquired in the years 2021/2022 (first half 2021: CHF 400.5 million).

As a result, sales were significantly higher than in the prior-year period, although preproduced deliveries, which mainly affected the Business Group Machines & Systems, in the three-digit million range had to be postponed until the second half of 2022. The reasons for the postponements were the COVID lockdown in China and supply chain bottlenecks.

EBIT, Net Result and Free Cash Flow
Rieter posted a loss of CHF -10.2 million at the EBIT level in the first half of 2022.

Earnings were impacted by significantly higher material and logistics costs. The price increases already implemented are having a delayed effect, mainly in the Business Group Machines & Systems, and were therefore unable to compensate for the high increase in costs. In addition, costs in connection with material shortages negatively impacted profitability. The result also includes acquisition-related expenses of CHF -11.2 million.

The loss at the net result level was CHF -25.2 million, of which CHF -17.6 million was due to the acquisition.

Free cash flow was CHF -57.1 million, attributable to the build-up of inventories in connection with the high order backlog and postponed deliveries.

Action Plan to Increase Sales and Profitability
Rieter is implementing a comprehensive package of measures with the aim of increasing sales and profitability in the second half of 2022.

The package focuses on two main priorities: Firstly, Rieter is continuing to systematically implement price increases while working to improve the quality of margins of the order backlog, so as to compensate for cost increases in materials and logistics.
Secondly, Rieter is working closely with key suppliers and is developing alternative solutions to eliminate material bottlenecks, as far as possible, in order to safeguard deliveries.

Rieter Site Winterthur
The Board of Directors has decided to begin the process for the sale of the remaining land at the Rieter site in Winterthur (Switzerland). In total, around 75 000 m2 of land will be sold.

Outlook
As already reported, Rieter expects demand for new systems to normalize further in the coming months. Due to the capacity utilization at spinning mills, the company anticipates that demand for consumables, wear & tear and spare parts will remain at a good level.

For the full year 2022, due to the high order backlog and the consolidation of the businesses acquired from Saurer, Rieter expects sales of around CHF 1 400 million (2021: CHF 969.2 million). The reduced sales forecast compared to early 2022 (March 2022: CHF 1 500 million) reflects the impact of global supply bottlenecks. The realization of sales revenue from the order backlog continues to be associated with risks in relation to the well-known challenges.

Despite significantly higher sales, Rieter expects EBIT and net result for 2022 to be below the previous year’s level. This is due to the considerable increases in the cost of materials and logistics, additional costs for compensation of material shortages as well expenses in connection with the acquisition in the years 2021/2022. Despite the price increases already implemented, global cost increases continue to pose a risk to the growth of profitability.

Source:

Rieter Holding AG

15.07.2022

ANDRITZ at CINTE 2022 in China

International technology group ANDRITZ will be presenting its nonwovens production solutions at CINTE 2022 in Shanghai, China – one of the main trade fairs for technical textile and nonwoven products in Asia. ANDRITZ will show its product portfolio covering state-of-the-art nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

ANDRITZ supports nonwovens producers in the move to sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded pulp or standard carded wipes. The latest development in this field is the ANDRITZ neXline wetlace CP line, which integrates the carded-pulp (CP) process. This is a fully engineered production line combining the benefits of drylaid and wetlaid technologies to produce a new generation of biodegradable wipes.

International technology group ANDRITZ will be presenting its nonwovens production solutions at CINTE 2022 in Shanghai, China – one of the main trade fairs for technical textile and nonwoven products in Asia. ANDRITZ will show its product portfolio covering state-of-the-art nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

ANDRITZ supports nonwovens producers in the move to sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded pulp or standard carded wipes. The latest development in this field is the ANDRITZ neXline wetlace CP line, which integrates the carded-pulp (CP) process. This is a fully engineered production line combining the benefits of drylaid and wetlaid technologies to produce a new generation of biodegradable wipes.

The neXline wetlaid aXcess targets smaller and medium production volumes and has been devised for new and existing lines. The line is easy and fast to ship due to the compact design, which also fits perfectly into containers. An operator-friendly configuration and versatile design ensure efficient production at affordable investment costs.

The aXcess range was specially developed at ANDRITZ (China) Ltd. Wuxi Branch to handle medium capacities. The facility in Wuxi has an experienced platform for production and service specially geared to serve the Asian nonwovens industry. With the aXcess range, ANDRITZ has developed a hybrid line combining European and Chinese machines, which is the ideal combination to obtain the best added value from each component in the line and be very flexible to accommodate different business cases.

15.07.2022

ANDRITZ at CINTE 2022 in China

ANDRITZ will be presenting its innovative nonwovens production solutions at CINTE 2022 in Shanghai, China (September 6–8). ANDRITZ will show its broad product portfolio covering state-of-the-art nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

SUSTAINABILITY IS KEY
ANDRITZ supports nonwovens producers in the move to sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded pulp or standard carded wipes. The latest development in this field is the ANDRITZ neXline wetlace CP line, which integrates the carded-pulp (CP) process. This is a fully engineered production line combining the benefits of drylaid and wetlaid technologies to produce a new generation of biodegradable wipes.

ANDRITZ will be presenting its innovative nonwovens production solutions at CINTE 2022 in Shanghai, China (September 6–8). ANDRITZ will show its broad product portfolio covering state-of-the-art nonwovens and textile production technologies such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, recycling, and natural fiber processing.

SUSTAINABILITY IS KEY
ANDRITZ supports nonwovens producers in the move to sustainability with the aim of reducing or eliminating plastic components while maintaining the high quality of the desired product properties. This applies to all types of sustainable wipes, such as flushable, biodegradable, bio-sourced, carded pulp or standard carded wipes. The latest development in this field is the ANDRITZ neXline wetlace CP line, which integrates the carded-pulp (CP) process. This is a fully engineered production line combining the benefits of drylaid and wetlaid technologies to produce a new generation of biodegradable wipes.

NEXLINE WETLAID AXCESS TARGETS SMALLER AND MEDIUM PRODUCTION VOLUMES
The neXline wetlaid aXcess targets smaller and medium production volumes and has been devised for new and existing lines. The compact line provides an entrance to the growing wetlaid market, with a variety of final applications and options.

ANDRITZ AXCESS DEVELOPED FOR MEDIUM CAPACITIES IN WUXI, CHINA
The aXcess range was specially developed at ANDRITZ (China) Ltd. Wuxi Branch to handle medium capacities. The facility in Wuxi has an experienced platform for production and service specially geared to serve the Asian nonwovens industry. It designs and manufactures cutting-edge lines to complement the ANDRITZ aXcess product range, which includes complete lines and individual machines for air-through bonding, needlepunch and spunlace processes. With the aXcess range, ANDRITZ has developed a hybrid line combining European and Chinese machines, which is the ideal combination to obtain the best added value from each component in the line and be very flexible to accommodate different business cases.

The service organization was set up to provide prompt delivery and excellent customer support, even during the COVID-19 pandemic. A team of technicians and process experts can be deployed quickly to customer sites requiring full-range assistance. The ANDRITZ facilities include a roll service center with state of-the-art grinding equipment and a test stand for various types of rolls.

In addition, our aXcess range manufactured in Europe also offers technologies for spunlaid and wetlaid processes. Increasing production speeds and widths, compact and reliable design, and affordable investment costs are what customers look for in a competitive market environment. To meet these requirements ideally, we recently enhanced our nonwoven calender and dryer ranges.

15.07.2022

Intertextile Shanghai Home Textiles Autumn rescheduled to 2023

In light of the current pandemic circumstances in China, the 2022 edition of Intertextile Shanghai Home Textiles Autumn will be deferred. The Autumn fair, which was originally scheduled to be held from 15 – 17 August at the National Exhibition and Convention Center in Shanghai, will now take place in 2023 at the same venue. The fair’s organisers will announce the new date in due course.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the decision: “After holding discussions with our stakeholders, we have made what we believe to be the responsible decision to delay the fair. While the call was made with the safety of the fair’s participants in mind, deferring the fair to the early part of next year will also allow more time for fairgoers to plan for their participation.”

“We understand that there is a lot of anticipation surrounding this fair, with exhibitors and buyers eager to connect in person. We would like to thank all participants for their patience and understanding, and also to express our continued dedication to provide a quality international trading platform for the home textile industry.”

In light of the current pandemic circumstances in China, the 2022 edition of Intertextile Shanghai Home Textiles Autumn will be deferred. The Autumn fair, which was originally scheduled to be held from 15 – 17 August at the National Exhibition and Convention Center in Shanghai, will now take place in 2023 at the same venue. The fair’s organisers will announce the new date in due course.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd, explained the decision: “After holding discussions with our stakeholders, we have made what we believe to be the responsible decision to delay the fair. While the call was made with the safety of the fair’s participants in mind, deferring the fair to the early part of next year will also allow more time for fairgoers to plan for their participation.”

“We understand that there is a lot of anticipation surrounding this fair, with exhibitors and buyers eager to connect in person. We would like to thank all participants for their patience and understanding, and also to express our continued dedication to provide a quality international trading platform for the home textile industry.”

Exhibitors or visitors with any further enquiries related to the fair can email, or visit the fair’s official website.

Source:

Messe Frankfurt (HK) Ltd

(c) adidas AG
15.07.2022

adidas launches its first product in collaboration with Spinnova

The adidas TERREX HS1 is one of the first knitted products to be made in part with Spinnova technology. At least 30% of the fabric in this mid-layer hiking hoodie comes from wood-based SPINNOVA® fibres (other fibres)* and 70% from cotton (organic).

Adidas is committed to helping End Plastic Waste via a three-loop strategy that consists of using recycled materials, materials that can be made to be remade and in the case of Made with Nature, products created in part with natural ingredients, such as the adidas TERREX HS1.  

The first product to emerge from this partnership, the adidas TERREX HS1 mid-layer is a piece of multi-functional gear that works on the trails and then rolls up into its hood for easy storage or to create a pillow on longer adventures. It was designed using UNITEFIT – an all-gender fit system created with a spectrum of sizes, genders, and forms in mind.

The adidas TERREX HS1 is one of the first knitted products to be made in part with Spinnova technology. At least 30% of the fabric in this mid-layer hiking hoodie comes from wood-based SPINNOVA® fibres (other fibres)* and 70% from cotton (organic).

Adidas is committed to helping End Plastic Waste via a three-loop strategy that consists of using recycled materials, materials that can be made to be remade and in the case of Made with Nature, products created in part with natural ingredients, such as the adidas TERREX HS1.  

The first product to emerge from this partnership, the adidas TERREX HS1 mid-layer is a piece of multi-functional gear that works on the trails and then rolls up into its hood for easy storage or to create a pillow on longer adventures. It was designed using UNITEFIT – an all-gender fit system created with a spectrum of sizes, genders, and forms in mind.

Made in part with Spinnova technology , a minimum of 30% of the fabric in the adidas TERREX HS1 comes from wood-based SPINNOVA® fibres (other fibres)* that are made by grinding wood pulp with water into a paste and then spun into a textile fibre.

The product also works with the material’s natural color. Since no dyeing or bleaching is applied, in turn this uses less water compared to the standard dyeing process.

* (Rayon) in US, (New type of cellulose fibre) in China

More information:
adidas Spinnova Fibers fibres Recycling
Source:

adidas AG

13.07.2022

Cotton Market Fundamentals & Price Outlook – July 22

SUPPLY, DEMAND, & TRADE
The latest USDA report featured reductions to figures for both world production and mill-use for both the 2021/22 and 2022/23 crop years.  For 2021/22, the global production estimate was lowered -0.7 million bales (to 116.2 million) and global consumption was lowered -1.9 million bales (to 119.8 million).  For 2022/23, the global production forecast was lowered -1.2 million bales (to 120.7 million) and global consumption was lowered -1.6 million bales (to 119.9 million).

With the decreases in use exceeding the declines in production, figures for global ending stocks increased.  For 2021/22, the projection rose +1.1 million bales (to 84.0 million).  For 2022/23, the forecast increased +1.6 million bales (to 84.3 million).

At the country-level, the largest changes to 2021/22 production were for Brazil (-400,000 bales to 12.3 million) and Uzbekistan (-100,00 bales to 2.7 million).  The largest changes for the 2022/23 harvest were for the U.S. (-1.0 million bales to 15.5 million) and Brazil (-200,000 bales to 13.0 million).

SUPPLY, DEMAND, & TRADE
The latest USDA report featured reductions to figures for both world production and mill-use for both the 2021/22 and 2022/23 crop years.  For 2021/22, the global production estimate was lowered -0.7 million bales (to 116.2 million) and global consumption was lowered -1.9 million bales (to 119.8 million).  For 2022/23, the global production forecast was lowered -1.2 million bales (to 120.7 million) and global consumption was lowered -1.6 million bales (to 119.9 million).

With the decreases in use exceeding the declines in production, figures for global ending stocks increased.  For 2021/22, the projection rose +1.1 million bales (to 84.0 million).  For 2022/23, the forecast increased +1.6 million bales (to 84.3 million).

At the country-level, the largest changes to 2021/22 production were for Brazil (-400,000 bales to 12.3 million) and Uzbekistan (-100,00 bales to 2.7 million).  The largest changes for the 2022/23 harvest were for the U.S. (-1.0 million bales to 15.5 million) and Brazil (-200,000 bales to 13.0 million).

It may be notable that there were no upward country-level revisions for mill-use in either 2021/22 or 2022/23.  The largest revisions for 2021/22 included those for China (-1.0 million to 37.0 million), Vietnam (-400,000 bales to 6.9 million), Bangladesh (-300,000 to 8.0 million), Pakistan (-100,000 bales to 10.9 million), and Uzbekistan (-100,000 bales to 2.7 million).  For 2022/23, consumption estimates were lowered for China (-500,000 bales to 37.5 million), India (-500,000 bales to 25.0 million), Bangladesh (-300,000 bales to 8.6 million), and Vietnam (-300,000 bales to 7.1 million).
The global trade forecast for 2022/23 was lowered -1.1 million bales (to 46.4 million).  The most significant changes on the import side included those for China (-500,000 bales to 10.0 million), Bangladesh (-300,000 bales to 8.5 million), and Vietnam (-300,000 bales to 7.2 million).  On the export side, the largest updates included those for the U.S. (-500,000 bales to 14.0 million) and Australia (+300,000 bales to 6.0 million).
 
PRICE OUTLOOK
Recent volatility was not limited to the cotton market.  A wide range of commodities lost significant value in June.  Between June 9th and July 5th (dates chosen unsystematically to describe the magnitude of declines), cotton fell -25% (NY/ICE December futures), corn fell -19% (Chicago Board of Trade, December contract), soybeans fell -17% (Chicago Board of Trade, November contract), wheat fell -25% (Chicago Board of Trade, December contract), copper fell -20% (London Metal Exchange, nearby), and Brent crude oil fell -12% (ICE, nearby).

The breadth of losses throughout the commodity sector suggests a sea change in investor sentiment for the entire category.  The effects of inflation, the withdrawal of stimulus, rising interest rates, and concerns about a possible recession could all be reasons explaining a reversal of speculative bets, and all could be contributors to the losses.  While the macroeconomic environment can be expected to continue to weigh on prices, there are also supportive forces for the market that are specific to cotton.

The current USDA forecast for U.S. cotton production is 15.5 million bales, and it may get smaller over time because of the severe drought in West Texas.  The current harvest figure is two million bales lower than the 2021/22 number and is equal to the five-year average for U.S. cotton exports (2017/18-2021/22).  On top of exports, the U.S. will need to supply domestic mills with 2.5 million bales.  The last time the U.S. had a severely drought-impacted crop (2020/21), the harvest was only 14.6 million bales.  In that crop year, the U.S. was able to export more than it grew because it had accumulated stocks in the previous year.  The U.S. is coming into the 2022/23 crop year with low stocks.  This suggests U.S. shipments may have been rationed.  Since the U.S. is the world’s largest exporter, this may lend some support to prices internationally.

More information:
cotton Cotton USA Cotton Inc.
Source:

Cotton Incorporated

05.07.2022

ITM 2022: Bringing Textile Technology Leaders together

ITM 2022 hosted textile technology leaders in Istanbul for 5 days, presenting the latest innovations in every field of textile from weaving, knitting, yarn, digital printing, finishing to denim. The ITM 2022 Exhibition, where a business volume of over 1.5 billion Euros was created in 5 days, accelerated the Turkish and world economy.

Organized by the partnership of Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc., ITM 2022- International Textile Machinery Exhibition was held at Tüyap Fair and Congress Center between 14-18 June.  ITM 2022 Exhibition, attended by 1280 companies and company representatives from 65 countries, was visited by 64,500 people from 102 countries, consisting of 44% international and 56% domestic visitors.

ITM 2022 hosted textile technology leaders in Istanbul for 5 days, presenting the latest innovations in every field of textile from weaving, knitting, yarn, digital printing, finishing to denim. The ITM 2022 Exhibition, where a business volume of over 1.5 billion Euros was created in 5 days, accelerated the Turkish and world economy.

Organized by the partnership of Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc., ITM 2022- International Textile Machinery Exhibition was held at Tüyap Fair and Congress Center between 14-18 June.  ITM 2022 Exhibition, attended by 1280 companies and company representatives from 65 countries, was visited by 64,500 people from 102 countries, consisting of 44% international and 56% domestic visitors.

Turkey became a Supply Center at the ITM 2022 Exhibition
The successful sales graph achieved at the ITM 2022 Exhibition proved that the difficulties experienced due to the pandemic for the last 3 years have been left behind. Turkey has become a supply center for European, Middle Eastern and African countries, especially with the disruption of the supply chain in Far East countries, including China. The profile of the professional visitors visiting the ITM 2022 Exhibition revealed that in the new world order that has shifted after the pandemic, the trade network has also changed hands and new players have appeared on the scene. The fact that manufacturers from all over the world such as Andorra, Angola, Honduras, Peru, Seychelles, Sierra Leone, Brazil, Sri Lanka, Tanzania, Egypt, Iran, and Oman purchased a large number of machinery and signed collaborations at the ITM 2022 Exhibition has proven this.

Exhibitors of ITM 2022 enlarge their stands for ITM 2024
Many company officials, who stated that they have achieved a sales graphic far above their expectations starting from the very first day of the ITM 2022 Exhibition and that they have hosted visitors from all over the world, decided to enlarge their stands at the ITM 2024 Exhibition. During the exhibition, companies visited the registration application points and applied for ITM 2024 participation.

The next meeting of the ITM and HIGHTEX Exhibitions will be held in Istanbul between 4-8 June 2024.

Source:

ITM / Teknik Fairs INC.

Photo: Andritz, Yanpai
04.07.2022

ANDRITZ supplies batt forming equipment to China

International technology group ANDRITZ has received an order from Yanpai Filtration Technology Co., Ltd. (YANPAI®), China, to supply batt forming equipment with an aXcess card and crosslapper for a needlepunch line producing PTFE filtration products at its site in Tiantai. The PTFE felts will be used as smoke filters in waste incineration plants. Start-up of the line is planned for the second half of 2022.

Yanpai is one of the leading Chinese producers of nonwoven filters for dust and air treatment and of woven filter fabrics used in solid/liquid separation. Established in 1990, Yanpai was at the forefront of development work on new industrial filtration fabrics. Today, Yanpai is a company with facilities in China and the USA.

International technology group ANDRITZ has received an order from Yanpai Filtration Technology Co., Ltd. (YANPAI®), China, to supply batt forming equipment with an aXcess card and crosslapper for a needlepunch line producing PTFE filtration products at its site in Tiantai. The PTFE felts will be used as smoke filters in waste incineration plants. Start-up of the line is planned for the second half of 2022.

Yanpai is one of the leading Chinese producers of nonwoven filters for dust and air treatment and of woven filter fabrics used in solid/liquid separation. Established in 1990, Yanpai was at the forefront of development work on new industrial filtration fabrics. Today, Yanpai is a company with facilities in China and the USA.

27.06.2022

Indorama Ventures enters world-first China license agreement

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, has signed a license agreement with Shandong Binhua New Material Co., Ltd. (Binhua), a subsidiary of Befar Group, a leading petroleum and chemical enterprise in China, to build, own and operate a propylene oxide (PO), t-Butanol (TBA) and t-Butyl methyl ether (MTBE) co-production unit.

Featuring the world’s only MTBE ‘single-step’ reaction technology, IVL’s proprietary innovation, the project is part of the ‘C3 and C4’ comprehensive utilization project in Shandong, China. It is one of the largest in the province, covering an area of over one million square meters.

Under the contract, IVL will provide a design package, technology, operational know-how and training to enable the construction and operation of a PO co-production with MTBE and TBA units for Binhua. The plant is part of a larger complex comprising propane dehydrogenation to propylene, butane isomerization, synthetic ammonia, and other installations.

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, has signed a license agreement with Shandong Binhua New Material Co., Ltd. (Binhua), a subsidiary of Befar Group, a leading petroleum and chemical enterprise in China, to build, own and operate a propylene oxide (PO), t-Butanol (TBA) and t-Butyl methyl ether (MTBE) co-production unit.

Featuring the world’s only MTBE ‘single-step’ reaction technology, IVL’s proprietary innovation, the project is part of the ‘C3 and C4’ comprehensive utilization project in Shandong, China. It is one of the largest in the province, covering an area of over one million square meters.

Under the contract, IVL will provide a design package, technology, operational know-how and training to enable the construction and operation of a PO co-production with MTBE and TBA units for Binhua. The plant is part of a larger complex comprising propane dehydrogenation to propylene, butane isomerization, synthetic ammonia, and other installations.

More information:
Indorama
Source:

Indorama Ventures Public Company Limited