From the Sector

Reset
32 results
21.11.2023

One in three checked biocidal products found to be non-compliant

EU-wide enforcement project found about 60 active substances in biocidal products that are not allowed on the EU, EEA and Swiss markets. One in three of the checked products did not comply with at least one of the checked legal requirements.
Helsinki, 21 November 2023 – The national enforcement authorities in 29 countries checked over 3 500 biocidal products. Overall, 37 % of the checked biocides were non-compliant with at least one of the checked legal requirements.
 
18 % of checked products were non-compliant with fundamental requirements that affect their safe use. Most of them either lacked a product authorisation or included non-allowed active substances. Most biocides with such major non-compliance were disinfectants, insecticides, and repellents/attractants. Inspectors found about 60 active substances that are not allowed in these products. All products that lacked authorisation or contained non-allowed active substances were withdrawn from the market. In some cases, criminal complaints or fines were issued.

EU-wide enforcement project found about 60 active substances in biocidal products that are not allowed on the EU, EEA and Swiss markets. One in three of the checked products did not comply with at least one of the checked legal requirements.
Helsinki, 21 November 2023 – The national enforcement authorities in 29 countries checked over 3 500 biocidal products. Overall, 37 % of the checked biocides were non-compliant with at least one of the checked legal requirements.
 
18 % of checked products were non-compliant with fundamental requirements that affect their safe use. Most of them either lacked a product authorisation or included non-allowed active substances. Most biocides with such major non-compliance were disinfectants, insecticides, and repellents/attractants. Inspectors found about 60 active substances that are not allowed in these products. All products that lacked authorisation or contained non-allowed active substances were withdrawn from the market. In some cases, criminal complaints or fines were issued.

The remaining 19 % non-compliant products were found to have minor deficiencies that did not affect safe use such as missing contact information of the supplier. In these cases the national enforcement authorities gave advice or administrative orders.

Much non-compliance was found in disinfectants sold to consumers. 265 disinfectants out of nearly 1 900 that were checked (14 %) were found to be non-compliant. This included serious compliance deficiencies such as lacking authorisation or incorrect labelling that usually led to the withdrawal of the disinfectants from the market.
 
The inspectors focused on disinfectants because new manufacturers entered the market with biocidal products at the early stages of the COVID-19 pandemic. Many of those disinfectants were not fully compliant with the EU’s Biocidal Products Regulation (BPR) and the related national transitional requirements for biocides.

More information:
ECHA biocid
Source:

European Chemicals Agency (ECHA)

Infinited Fiber Company
14.10.2022

Infinited Fiber Company accelerates scaling plans amid turbulence

and textile technology company Infinited Fiber Company’s work to build the world’s first commercial-scale Infinna™ textile fiber factory in Kemi, Finland, has progressed largely according to plan since the announcement of the factory site in June 2022. The company is increasing its focus on scaling Infinna™ production volume further as quickly as possible. This is in response to the continued and growing customer demand for the company’s high-quality regenerated textile fiber Infinna™. The market impacts of the ongoing war in Ukraine – including the increased uncertainty on the global utility, commodity and financial markets – have highlighted the need to proceed rapidly with technology scaling on multiple fronts.
 

and textile technology company Infinited Fiber Company’s work to build the world’s first commercial-scale Infinna™ textile fiber factory in Kemi, Finland, has progressed largely according to plan since the announcement of the factory site in June 2022. The company is increasing its focus on scaling Infinna™ production volume further as quickly as possible. This is in response to the continued and growing customer demand for the company’s high-quality regenerated textile fiber Infinna™. The market impacts of the ongoing war in Ukraine – including the increased uncertainty on the global utility, commodity and financial markets – have highlighted the need to proceed rapidly with technology scaling on multiple fronts.
 
“We are not immune to the global market context in which we operate. The supply chain issues stemming from the Covid-19 pandemic are still wreaking havoc, and the ongoing war in Ukraine has dealt a heavy blow to the global utility, commodity, and financial markets – and to us. We are satisfied with the progress at the site of our planned commercial-scale factory and the opening of the factory remains our key priority. The current, unstable market environment has highlighted the need for us to also accelerate efforts to simultaneously pursue other avenues for scaling production, with the ultimate aim of serving our customers in the best possible way in the long run,” said Infinited Fiber Company CEO and cofounder Petri Alava.
 
Infinited Fiber Company said in June that it planned to build a factory to produce Infinna™, a textile fiber that can be created 100% from cotton-rich textile waste, at the site of a discontinued paper mill in Kemi, Finland. The factory is expected to create around 270 jobs in the area and to have an annual production capacity of 30,000 metric tons, equivalent to the fiber needed for about 100 million T-shirts. The future factory’s customer-base includes several of the world’s leading apparel companies, with most of the future production capacity already sold out for several years.
 
Since June, Infinited Fiber Company has advanced the site-specific basic engineering, recruitment planning, vendor selection, and permit processes according to plan. The limited component availability caused by the continuing impacts of the Covid-19 pandemic and the war in Ukraine have, however, prolonged significantly the delivery times for some of the key equipment and machinery needed for the factory. As a result of these developments, Infinited Fiber Company has re-evaluated its overall factory project timeline. The first commercial fiber deliveries from Kemi are now expected to begin in January 2026. The scope of the project remains unchanged and construction work at the site is expected begin during 2023 as previously communicated.
 
In addition, the European energy crisis sparked by the war in Ukraine has caused the electricity prices in Finland to roughly triple, and the prices of some of the key chemicals needed in the fiber regeneration process have risen by some 200-300% since the start of the war.
 
“We of course don’t have a crystal ball. But according to our advisors and other experts, utility and commodity prices are forecast to normalize before 2026, when we now expect the first commercial fiber deliveries from Kemi to be shipped. In addition to the likely normalization of the market, the extended timeline enables us to undertake the necessary measures to develop the profitability of the future factory. The growing demand for Infinna™, despite the general turbulence, is an encouraging and clear indication of the fashion industry’s commitment to circularity,” said Petri Alava.

Source:

Infinited Fiber Company

09.05.2022

GOTS releases 2021 annual report detailing record growth and increased interest

Global Organic Textile Standard (GOTS) announces the release of its 2021 Annual Report. Even with the continued constraints of COVID-19, 2021 was a year of significant developments for GOTS. An increased interest in sustainability in the textile industry led to greater awareness of GOTS certification from businesses as well as consumers.

Global Organic Textile Standard (GOTS) announces the release of its 2021 Annual Report. Even with the continued constraints of COVID-19, 2021 was a year of significant developments for GOTS. An increased interest in sustainability in the textile industry led to greater awareness of GOTS certification from businesses as well as consumers.

The 31-page report details the record growth experienced in 2021, which included an increase of 19 percent in GOTS certified facilities around the world, with Certification Bodies (CBs) reporting 12.338 facilities in 79 countries (+11 percent). Three new GOTS-approved Certification Bodies brought the total to 18, nine of which have chemical input approval in their scopes. The additional CBs are helping meet an ever-increasing demand for certification. The rise in certifications also allowed GOTS to expand internally, adding Representatives as well as colleagues with expertise in Standard Development and Implementation, Quality Assurance, Communication, and IT. GOTS representatives worldwide offered training and education to thousands of participants, including businesses, governmental representatives, certification bodies, and other stakeholders. Visits to the GOTS website jumped 43 percent from 2020 and GOTS’s following on social media expanded significantly, gaining 57 percent across platforms.

“Despite ongoing difficulties and uncertainty caused by the Covid-19 pandemic, decision-makers continue to pursue their sustainability goals and value GOTS as a tool to accomplish them. We will continue to strive toward our vision of a future in which organic textiles are a significant part of everyday life, enhancing people’s lives and the environment,” says GOTS Managing Director Claudia Kersten.

Additional highlights covered in the report include chronicling the implementation of the most recent update to the standard document, GOTS version 6.0, and the release of ‘Conditions for the Use of GOTS Signs (CUGS)’, which outlines the rules for using the GOTS logo and labeling and updates to GOTS Scope and Transaction Certification policies which are a crucial part of the certification process.

Source:

Global Organic Textile Standard

(c) INDA
27.04.2022

World of Wipes® International Conference 2022 addresses changing role of wipes

With the wipes sector adapting to demands for products that protect consumers from COVID-related risks, industry experts will present the latest insights for moving forward post-pandemic at the World of Wipes® (WOW) International Conference.   

The shift from “clean” to “safe” in the world of wipes will be among the key topics thought-leading speakers will address at the in-person event, June 27-30, at the Marriott Marquis in Chicago.

The information-packed program will tackle timely topics to support decision making on the following key themes: Circular and Sustainable Wipes, Supply Chain Challenges in Wipes, Nonwoven Substrates for More Sustainable Wipes, Trends in the Wipes Market and Among Consumers, Disinfection Concerns and New Technologies, Sustainable Wipe Packaging Trends and Developments in Flushability Issues.

World of Wipes Session Highlights

With the wipes sector adapting to demands for products that protect consumers from COVID-related risks, industry experts will present the latest insights for moving forward post-pandemic at the World of Wipes® (WOW) International Conference.   

The shift from “clean” to “safe” in the world of wipes will be among the key topics thought-leading speakers will address at the in-person event, June 27-30, at the Marriott Marquis in Chicago.

The information-packed program will tackle timely topics to support decision making on the following key themes: Circular and Sustainable Wipes, Supply Chain Challenges in Wipes, Nonwoven Substrates for More Sustainable Wipes, Trends in the Wipes Market and Among Consumers, Disinfection Concerns and New Technologies, Sustainable Wipe Packaging Trends and Developments in Flushability Issues.

World of Wipes Session Highlights

  • Lifestyle Shifts and the World of Wipes: Meeting the Changing Consumer Demand to Secure Growth – Liying Quian, Research Analyst, Euromonitor International will explore personal and beauty care trends based on consumer surveys that could shape wipes’ long-term performance
  • The Supply Chain – Import Pressures Versus Domestic Manufacturing – Jacob Smith, Director, Supply Chain and Customer Care, Health, Hygiene, and Specialties Division, North America, Berry Global will share his expertise and experience on how COVID-19 has impacted domestic production and international sourcing of wipes
  • Packaging Sustainability:  A Global Perspective – David Clark, Vice President of Sustainability, Amcor will look at how consumer brands, retailers and others are responding to consumer demand for more sustainable packaging and discuss progress and risks in the U.S. and other countries
  • How Sustainable are You Willing to Be? New Technology to Support Use of Recycled Fiber Sources – Richard Knowlson, Principal, RPK Consulting will tackle the question of how new manufacturing technology can help produce more sustainable nonwoven substrates in today’s price-sensitive environment
  • Dead Turtle Logos – What We Know So Far in the EU – Heidi Beatty, Chief Executive Officer, Crown Abbey, LLC will share the latest learnings on the European Union’s Single Use Plastic Directive and the impact of the plastic-free packaging logos on consumer attitudes
  • Challenges and Pitfalls of Scaling Up a Waste Cleaning Wipes Collection and Recycle System – Sergio Barbarino, Research Fellow, Fabric and Home Care Open Innovation, Procter & Gamble Distribution Company Europe will look at cleaning wipes’ potential to be recycled and become a convenient pioneering experimental platform
  • Case Study: Surface Disinfection Incompatibility with Medical Devices Creates Potential Patient Risks – Caroline Etland, Ph.D., RN. CNS, ACHPN, Associate Professor, Hahn School of Nursing, BINR, University of San Diego will share real examples of the issues healthcare facilities face with surface disinfection incompatibility that make cleaning and disinfection a major challenge

In addition to the conference program, WOW 2022 also features two nights of tabletop displays and receptions; the presentation of the World of Wipes Innovation Award® and the INDA Lifetime Technical Achievement Award; and 11 hours of face-to-face engagement during a welcome reception, first-time attendee mentorship program, and breakfast connections. The event kicks off with the WIPES Academy, a 1.5-day value-added training opportunity on June 27-28.

30.03.2022

Member States to nominate candidates for next IFAD President

At a time when global food security is becoming a rising concern for governments around the world, the International Fund for Agricultural Development (IFAD) today announced a call to its 177 Member States to nominate candidates for the Fund’s next President.
 
IFAD is a specialized United Nations agency and international financial institution focused on the alleviation of rural poverty and hunger.
 
The President is IFAD’s most senior position with responsibility for leading the organization and chairing its Executive Board. Nominations for President can only be made by IFAD Member States and must be received by the Secretary of IFAD no later than 6 May 2022.
 

At a time when global food security is becoming a rising concern for governments around the world, the International Fund for Agricultural Development (IFAD) today announced a call to its 177 Member States to nominate candidates for the Fund’s next President.
 
IFAD is a specialized United Nations agency and international financial institution focused on the alleviation of rural poverty and hunger.
 
The President is IFAD’s most senior position with responsibility for leading the organization and chairing its Executive Board. Nominations for President can only be made by IFAD Member States and must be received by the Secretary of IFAD no later than 6 May 2022.
 
The President will lead IFAD at a crucial time. Fears that rising food and fuel prices - worsened by the current conflict in Ukraine - could lead to a global food crisis are running high, with the world’s poorest rural people likely to be hardest hit. Small-scale producers are already reeling from the impacts of the COVID-19 pandemic, droughts, cyclones and other natural disasters. Their incomes are expected to be affected by the rising cost of inputs and disrupted markets. This is also likely to have devastating and long-term impacts on their nutrition and food security.
 
IFAD plays a crucial role in increasing the resilience of rural small-scale producers to shocks, and ensuring that they can continue to grow food and earn incomes. The Fund’s investments in climate adaptation and sustainable food systems are helping to achieve the Sustainable Development Goals to eradicate hunger and poverty.
 
Following the nomination process, the appointment of the next President will take place on 7 July 2022 during the first special session of the IFAD Governing Council. The Governing Council is IFAD's principle governing body with full decision-making powers.
 
The President of IFAD serves a four-year term, renewable once. The newly appointed President will take office on 1 October 2022.

Source:

IFAD

03.03.2022

Lenzing opens lyocell plant in Thailand

  • Project delivered on schedule and at budget after two and a half years of construction despite challenges arising from a global pandemic
  • New state-of-the-art lyocell plant with a capacity of 100,000 tons will help serve the growing demand for sustainably produced fibers
  • Important milestone towards a carbon-free future has been set

The Lenzing Group is pleased to announce the completion of its key lyocell expansion project in Thailand. The new plant, one of the largest of its kind in the world with a nameplate capacity of 100,000 tons per year, started production on schedule and will help to even better meet the increasing customer demand for TENCEL™ branded lyocell fibers. For Lenzing, the project also represents an important step towards strengthening its leadership position in the specialty fiber market and into a carbon-free future.

  • Project delivered on schedule and at budget after two and a half years of construction despite challenges arising from a global pandemic
  • New state-of-the-art lyocell plant with a capacity of 100,000 tons will help serve the growing demand for sustainably produced fibers
  • Important milestone towards a carbon-free future has been set

The Lenzing Group is pleased to announce the completion of its key lyocell expansion project in Thailand. The new plant, one of the largest of its kind in the world with a nameplate capacity of 100,000 tons per year, started production on schedule and will help to even better meet the increasing customer demand for TENCEL™ branded lyocell fibers. For Lenzing, the project also represents an important step towards strengthening its leadership position in the specialty fiber market and into a carbon-free future.

The construction of the plant located at Industrial Park 304 in Prachinburi, around 150 kilometers northeast of Bangkok, started in the second half of 2019 and proceeded largely according to plan, despite the challenges arising from the COVID-19 pandemic. The recruiting and onboarding of new employees has been successful. Investments (CAPEX) amounted to approx. EUR 400 mn.

“The demand for our wood-based, biodegradable specialty fibers under the TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ brands is growing very well. In Asia in particular, we see huge growth potential for our brands based on sustainable innovation. With the production start of the lyocell plant in Thailand, Lenzing reached an important milestone in its growth journey, supporting our ambitious goal to make the textile and nonwoven industries more sustainable”, said Robert van de Kerkhof, Member of the Managing Board.

In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions per ton of product by 50 percent by 2030. The target is to be climate-neutral by 2050. Due to the established infrastructure, the site in Thailand can be supplied with sustainable biogenic energy and contribute significantly to climate protection.

Together with the key project in Brazil and the substantial investments at the existing sites in Asia, Lenzing is currently implementing the largest investment program in its corporate history (with more than approx. EUR 1.5 bn). Lenzing will continue to drive the execution of its strategic projects, which are to make a significant contri-bution to earnings from 2022.

Source:

Lenzing AG

23.02.2022

GOTS marks 20th anniversary with all-time high in certified facilities

  • Record high: 12,338 (+19%) GOTS certified facilities in 79 countries in 2021  

Twenty years after its inception, the textile processing standard for organic fibres records new all-time high figures: 18 GOTS Approved Certification Bodies report a total of 12,338 certified facilities (+19%) in 79 countries (+11%).  

Among the countries with the largest increase in GOTS certified facilities in 2021 are Turkey (+61% to 1.799), Italy (+53% to 894), Germany (+19% to 817), Portugal (+35% to 608), France (+22% to 122), Denmark (+14% to 115), Switzerland (+15% to 61), Belgium (+55% to 59), Sweden (+34% to 51) and Vietnam (+264% to 51).

  • Record high: 12,338 (+19%) GOTS certified facilities in 79 countries in 2021  

Twenty years after its inception, the textile processing standard for organic fibres records new all-time high figures: 18 GOTS Approved Certification Bodies report a total of 12,338 certified facilities (+19%) in 79 countries (+11%).  

Among the countries with the largest increase in GOTS certified facilities in 2021 are Turkey (+61% to 1.799), Italy (+53% to 894), Germany (+19% to 817), Portugal (+35% to 608), France (+22% to 122), Denmark (+14% to 115), Switzerland (+15% to 61), Belgium (+55% to 59), Sweden (+34% to 51) and Vietnam (+264% to 51).

“What seemed utopian to many in 2002 has become a reality in the past 20 years. We have created an organic textile standard, certified by approved certification bodies, which is accepted in all major markets. GOTS is a standard that gives consumers the power to choose truly organic products sourced from sustainable supply chains.” says Claudia Kersten, Managing Director at GOTS. “Despite ongoing difficulties and uncertainty caused by the Covid-19 pandemic, decision-makers continue to pursue their sustainability goals and value GOTS as a tool to accomplish them”.

The results of the annual GOTS Survey among certified entities underline this. Out of 1.114 respondents (+39%), 63% indicated a permanent shift in their sustainability strategy with a focus on the environment and health of their workers and staff.

Growing interest from industry, the public, and the media drove website visits up an impressive 48%. Media exposure grew by 64% and GOTS social media followers across several platforms jumped by 57%.
“As much as we are pleased with the development so far, we don’t intend to rest on our laurels” adds Rahul Bhajekar, Managing Director at GOTS. “In March 2022 we begin revision for GOTS version 7.0 involving all stakeholders including associations, organisations, companies, and individuals to further advance the progressive, innovative, stringent yet practical standard of GOTS”.

More information:
GOTS
Source:

GOTS

17.02.2022

ROICA™ welcomes 2022 with a brand new wardrobe

ROICA™ main objective is to focus on and respond to new generation values in fashion. Values that are key for contemporary consumers, who are the ones leading the change throughout all the supply value chain, and have received even more attention since the beginning of the pandemic. ROICA™ by Asahi Kasei team knows that value creation is the basic foundation of contemporary business. Its teams are ready to go to the next level, answering to the market demand for innovation while sharing its responsibility efforts towards the new generation of consumer.

ROICA™ main objective is to focus on and respond to new generation values in fashion. Values that are key for contemporary consumers, who are the ones leading the change throughout all the supply value chain, and have received even more attention since the beginning of the pandemic. ROICA™ by Asahi Kasei team knows that value creation is the basic foundation of contemporary business. Its teams are ready to go to the next level, answering to the market demand for innovation while sharing its responsibility efforts towards the new generation of consumer.

For this reason, the ROICA™ strategy is based on two key elements. On the one side, a strong focus on responsible innovation, able to respond to new fashion needs and desires while not harming the environment nor the society at large. On the other hand, a consolidation of partnerships along the whole supply chain through conversations and collaborations with companies sharing the ROICA™ values, in order to deliver creativity, solutions and design to all contemporary consumers. For example, in terms of fabric producers ROICA™ has been working alongside industry leaders such as Brugnoli, Candiani Denim, CIFRA, Dresdner Spitzen, Eusebio, Iluna Group, Innova Fabrics, Inter Jersey Milano, Lauma Fabrics, L/E Textile, Maglificio Ripa, M.I.T.I., Penn Italia - Penn Textile Solutions GmbH, Piave Maitex, Sitip S.p.A., Sofileta, Taubert Textil, Tessitura Colombo, TINTEX Textiles, TVB Textil-Vertrieb-Beratungs.

See attached document to read more about the current wardrobe stories.

Source:

ROICA™ by Asahi Kasei / GB Network

09.12.2021

Neonyt: Die Konferenz Fashionsustain zeigt Wege zur Veränderung

Um aktuelle Herausforderungen zu bewältigen und für zukünftige gewappnet zu sein, ist die Mode- und Textilindustrie bereit, sich grundlegend zu verändern. Unter dem Motto Change the set-up beleuchtet die Fashionsustain, das internationale und multidisziplinäre Konferenzformat der Neonyt, vom 18. bis 20. Januar 2022 im Rahmen der Frankfurt Fashion Week, wie das gelingen kann und setzt Impulse für den laufenden Transformationsprozess der Branche. Neben technologischen Innovationen, neuen Geschäftsmodellen und Ansätzen für den Modehandel stehen dabei Themen wie Konsumverhalten, Gaming und Nudging for Good auf der Agenda, um das Spannungsfeld zwischen Anspruch und Realität zu ergründen.

Um aktuelle Herausforderungen zu bewältigen und für zukünftige gewappnet zu sein, ist die Mode- und Textilindustrie bereit, sich grundlegend zu verändern. Unter dem Motto Change the set-up beleuchtet die Fashionsustain, das internationale und multidisziplinäre Konferenzformat der Neonyt, vom 18. bis 20. Januar 2022 im Rahmen der Frankfurt Fashion Week, wie das gelingen kann und setzt Impulse für den laufenden Transformationsprozess der Branche. Neben technologischen Innovationen, neuen Geschäftsmodellen und Ansätzen für den Modehandel stehen dabei Themen wie Konsumverhalten, Gaming und Nudging for Good auf der Agenda, um das Spannungsfeld zwischen Anspruch und Realität zu ergründen.

Selbst in Zeiten, in denen nichts sicher scheint, gibt es eine Konstante: die Veränderung. Change the set-up – unter diesem Motto lädt die Fashionsustain die Modebranche vom 18. bis 20. Januar 2022 nach Frankfurt ein. Mit dem Wechsel des Standortes von Berlin nach Frankfurt ändert die Fashionsustain nicht nur ihren Ort, sondern lädt Entscheidungsträger*innen der Branche auch zu einem Perspektivwechsel ein. In Panels, Talks, Keynotes und interaktiven Formaten sprechen internationale Vertreter*innen nachhaltiger und konventioneller Modemarken, Designerbrands, Modeproduzent*innen, Nichtregierungs- und Nonprofit-Organisationen und Handelsvertretungen darüber, wie sie sich weiterhin agil aufstellen und welche Rolle das Thema Nachhaltigkeit hier spielt.

Schon prä-pandemisch hatte sich die Textil- und Modebranche großen Herausforderungen zu stellen: Das Problem der Überproduktion und damit einhergehender Umweltbelastung und sozialer Ungerechtigkeit ist nun eines von vielen geworden. Neue Herausforderungen wie logistische Engpässe, Fertigungsverzögerungen, hohe Versandkosten und Materialknappheit kommen hinzu. Die gute Nachricht: Trotz international verbreiteter Produktionsstörungen und kurzzeitigem Stillstand kann selbst eine globale Pandemie aktuelle Megatrends wie Neo-Ökologie, Konnektivität und Wissenskultur nicht bremsen. Tatsächlich wirken diese Trends weiterhin als Treiber internationaler Branchenveränderungen und mit ihnen die aktuellen Herausforderungen als Beschleuniger dieses Wandels. Große Schritte in der Digitalisierung gehen dabei einher mit zunehmender Transparenz von Lieferketten und einem Fokus auf ökologische und soziale Maßnahmen, was wiederum positive Effekte auf Gerechtigkeit, Vielfalt und Integration mit sich bringt. Wichtig ist nun, dass alle Akteur*innen die vergangenen zwei Jahre reflektieren und sich auf ein sich ständig veränderndes Marktumfeld einstellen, in dem auch die Interessen ihrer Kund*innen, Partner*innen und der Gesellschaft Berücksichtigung finden.

Vor diesem Hintergrund bietet die Fashionsustain die Möglichkeit, sich im Rahmen der Neonyt aktiv mit aktuellen Herausforderungen auseinanderzusetzen und auszutauschen. Erste Einblicke in das Programm im Januar:

  • „Change the set-up“ steht gleich am ersten Tag der Fashionsustain ganz oben auf der Agenda. Wie wir die Lücke zwischen Einstellung und Verhalten von Konsument*innen und damit zwischen Wunsch und Wirklichkeit in Sachen nachhaltigem Konsum schließen können, diskutiert Neurowissenschaftlerin und Professorin für Medienpsychologie Prof. Dr. Maren Urner mit Brancheninsider*innen und NGO-Vertreter*innen. Dass der Wandel des Set-Ups international nachhaltig gestaltet werden muss und wie das gelingen kann, beleuchten das UN Global Compact Network Germany und das Umweltbundesamt gemeinsam mit einem der weltweit führenden Hersteller nachhaltiger Fasern Tencel Lenzing AG und den beiden NPOs Fairwear Foundation und The Sustainable Angle.
  • Um das Thema Digitalisierung dreht sich alles am zweiten Konferenztag. Wie wir diese nutzen können, um nachhaltige Mode zu designen, zeigt beispielsweise Deutschlands Nachbar Dänemark mit seinem Kreativnetzwerk Creative Denmark, dem nachhaltigen Modeunternehmen Son of a tailor und der Circularity App Create2stay. Ein weiteres Thema, das unter diesem Schwerpunkt nicht fehlen darf: digitale Lösungen, um Lieferketten transparent zu machen. Dazu diskutieren unter anderem die nachhaltige Modemarke Greenbomb und die Technologieanbieter Retraced GmbH und Remei AG.
  • Der Handel steht am dritten Tag der Fashionsustain im Fokus. In einem Interview geben die Startups Yook und Keepoala Einblick, wie sie Konsument*innen anhand ihrer Apps mit positiven Anreizen motivieren, nachhaltiger zu konsumieren. Vintagemode-Anbieter Vinokilo, das nachhaltige Mode-Label Jan‘n June und Re-Commerce-Expertin Doris Schoger liefern Brancheninsights darüber, ob und inwiefern Re-Commerce ein erfolgreiches Businessmodell für den Modehandel sein kann.

Das vollständige Programm der Fashionsustain erscheint in Kürze online.

Source:

Messe Frankfurt / KERN

(c) Dr. Wieselhuber & Partner GmbH
25.11.2021

W&P: Modebranche - Trendometer 2022

Was sind die angesagten Themen in der Modebranche im Jahr 2022?  Auf einer Skala von 1-10: Welche Trends scheuchen die Player aus ihrer Komfortzone, welchen „Impact“ haben sie?
Branchenexperte Philipp Trompeter von Dr. Wieselhuber & Partner (W&P) wagt eine Prognose – im Trendometer 2022.

Was sind die angesagten Themen in der Modebranche im Jahr 2022?  Auf einer Skala von 1-10: Welche Trends scheuchen die Player aus ihrer Komfortzone, welchen „Impact“ haben sie?
Branchenexperte Philipp Trompeter von Dr. Wieselhuber & Partner (W&P) wagt eine Prognose – im Trendometer 2022.

Engpass Lieferkette und Warenversorgung - IMPACT 10
Nach Ifo-Umfragen leiden fast alle Modehändler unter Lieferproblemen und sie rechnen damit, dass diese Versorgungslücken noch weit in das Jahr 2022 andauern. Während es in Lockdown-Zeiten noch darum ging, die Warenversorgung mit Hinblick auf Unsicherheit bzgl. der Öffnungszeiten im Textileinzelhandel möglichst flexibel zu halten, kämpfen die Lieferanten nun überwiegend damit, die Ware zielgenau aus den Produktionsländern in die Absatzmärkte zu schaffen. Die Hersteller müssen mit Herausforderungen wie Rohstoffverknappung, Containerstaus und Hafenschließungen umgehen. Wer seine Supply-Chain also bestmöglich im Griff hat, verfügt über einen Wettbewerbsvorteil gegenüber Lieferanten, deren Ware nicht zum geplanten Abverkaufszeitpunkt am POS eingetroffen ist. Hierbei gilt es zum einen den Anteil aus Fernost und Nearshore Produktion auszubalancieren. Aber auch operative Spielregeln in der Warenlogistik müssen berücksichtigt werden. Die Digitalisierung spielt auch weiter eine tragende Rolle, wenn es darum geht Prozesse unternehmensweit schlank und fit zu machen, um so den steigenden Einkaufs- und Logistikkosten entgegenzuwirken.

Wirksame Pillen für die Performance – IMPACT 9
Gerade in wirtschaftlich herausfordernden Zeiten mit steigenden Beschaffungskosten kommt es drauf an, die „richtigen Pillen zu schlucken“, die zu einer Verbesserung der Performance beitragen. Pricing ist der eine Hebel. Im hochwertigen Segment wird bereits versucht, durch selektiven Vertrieb die Preise und Margen zu erhöhen. Doch nicht immer sind Preisanpassungen möglich, vor allem wenn Eckpreislagen gehalten werden müssen oder die Macht des Handels zu groß ist. Umso mehr rücken die eigenen Kosten in den Fokus. Viele Einsparpotenziale, die während der Corona-Hochphase eingeführt wurden, können in den „Regelbetrieb“ überführt werden. Dazu gehört z.B. die Senkung der Marketing-/Vertriebskosten durch digitales Ordern und andere Prozessoptimierungen. Doch das allein reicht nicht: Weitere Kostenstellhebel für die operative Exzellenz liegen erfahrungsgemäß im Einkauf, in der Logistik und Supply Chain, im Neuproduktentwicklungsprozess sowie last but noch least in den Gemeinkosten. In allen Segmenten spielt die Digitalisierung eine Schlüsselrolle: Digitale Prozesse und Vernetzung sowie digitale Tools sind erforderlich, um effizienter, robuster und damit renditestärker zu werden.

Konsequente Nachhaltigkeit im gesamten Geschäftsmodell - IMPACT 8
Das Thema „Nachhaltigkeit“ ist durch die Pandemie zunächst in der öffentlichen Wahrnehmung etwas in den Hintergrund gerückt. Gleichzeitig haben die meisten Unternehmen den gesellschaftlichen und politischen Druck sowie die zunehmende Wichtigkeit für den Endverbraucher erkannt und zahlreiche Initiativen und konkrete Maßnahmen in diese Richtung gestartet. Für echte Nachhaltigkeit in der Textilbranche reichen einzelne Projekte jedoch nicht. Die Dimensionen „Planet“, „People“ und „Performance“ müssen konsequent angegangen werden. Umweltfaktoren (Planet) sind z.B. nachhaltige Praktiken in der der Rohstoffgewinnung (inkl. Recyclinganteilen), Verringerung des Wasserverbrauchs in der Produktion oder die Reduktion von Verpackungsabfällen. In der Dimension „People“ sind insbesondere die sozialen Standards in der Produktion im Fokus. Wer nachhaltig am Markt vertreten zu sein will,  braucht zudem ein robustes Geschäftsmodell, das nachhaltig gute Ergebnisse liefert, um auch in die Zukunft investieren zu können (Performance). Nur so sind Unternehmen auch krisenresistent.

Source:

Dr. Wieselhuber & Partner GmbH

16.11.2021

RGE: Second Annual Update on Textile Fibre Innovation and Technology

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Amid the COVID-19 pandemic continuing to restrict travel and collaboration, RGE persisted in building upon existing partnerships, while entering into new agreements. Sateri strengthened its strategic collaboration with Infinited Fiber Company, participating in the company’s EUR30 million funding round, which attracted new and existing investors such as H&M Group, Adidas, BESTSELLER and Zalando.

New partnerships formed by RGE included a five-year textile recycling research collaboration with Nanyang Technological University Singapore, and a three-year strategic partnership with the Textile and Fashion Federation Singapore which seeks, among others goals, to advance research and innovation in circular economy approaches to fashion waste in Asia.

RGE’s in-house R&D team has made good progress in advancing its textile-to-textile project, focusing on producing quality viscose using recycled cotton textiles as feedstock. To support plans to build a textile recycling facility in Indonesia, and as part of commercial feasibility analysis, studies examining the availability of textile waste and textile recycling landscapes in China, Indonesia, Sri Lanka and Bangladesh were completed.

Sateri remains on track in developing a product with 50 per cent recycled content by 2023, and to reach 100 per cent by 2030. It also aims for 20 per cent of its feedstock to contain alternative or recycled materials by 2025. In this similar vein, APR will source 20 per cent of its feedstock from alternative or recycled materials by 2030.

Source:

RGE / Omnicom Public Relations Group

Indorama Ventures launches its 10th annual Sustainability Report celebrating a decade of PET recycling and carbon reduction milestones (c) Indorama Ventures Public Company Limited
10th annual Sustainability Report
27.10.2021

Indorama Ventures launches its 10th annual Sustainability Report

  • IVL is celebrating a decade of PET recycling and carbon reduction milestones
  • Over 10 years, IVL has achieved a 100x increase in recycled PET

Indorama Ventures Public Company Limited (IVL), a world-class sustainable chemical company, launches its 10th annual Sustainability Report and a video celebrating a decade of ambitious PET recycling and carbon reduction milestones. The company is committed to intensifying its drive towards ending plastic waste and a more circular economy in the decade ahead.

Since its first Sustainability Report in 2011, IVL has grown its sustainability initiatives through the 3Ps – People, Planet and Prosperity. From the baseline in 2013, the company achieved a 10% reduction in GHG intensity, 4% in energy intensity and 7% in water intensity. It also increased total waste diverted from landfill from 48% to 84% in 2020. Moreover, IVL’s global PET recycling capacity has improved almost 100 times from 3,576 tons per year in 2011 – the first entry of IVL to the PET recycling business – to more than 330,000 tons per year in the second quarter of 2021.

  • IVL is celebrating a decade of PET recycling and carbon reduction milestones
  • Over 10 years, IVL has achieved a 100x increase in recycled PET

Indorama Ventures Public Company Limited (IVL), a world-class sustainable chemical company, launches its 10th annual Sustainability Report and a video celebrating a decade of ambitious PET recycling and carbon reduction milestones. The company is committed to intensifying its drive towards ending plastic waste and a more circular economy in the decade ahead.

Since its first Sustainability Report in 2011, IVL has grown its sustainability initiatives through the 3Ps – People, Planet and Prosperity. From the baseline in 2013, the company achieved a 10% reduction in GHG intensity, 4% in energy intensity and 7% in water intensity. It also increased total waste diverted from landfill from 48% to 84% in 2020. Moreover, IVL’s global PET recycling capacity has improved almost 100 times from 3,576 tons per year in 2011 – the first entry of IVL to the PET recycling business – to more than 330,000 tons per year in the second quarter of 2021.

Celebrating 10 years of sustainability reporting
Throughout the decade, IVL has voluntarily adopted international standards for its sustainability reports to drive benefits for the environment, society and economy. The effort resulted in recognition by world-class sustainability ratings agencies such as the Dow Jones Sustainability Indices (DJSI) and the Morgan Stanley Capital International (MSCI).

Recent Sustainability Reports have featured business cases and special situations such as COVID-19. In 2016, IVL was the first Thailand-based company to introduce an additional, shorter version of the report called the Sustainability Report Executive Summary. This year, IVL has made further improvements with an interactive approach, including links to videos and shortcuts to highlighted articles. As a global company operating in 33 countries, the report is available in 15 languages.

On track to recycle 50 billion bottles per year by 2025
In 2020 IVL recycled 10.1 billion PET bottles and is on track to recycle 50 billion bottles per year by 2025. The company’s global reach and leadership position as the world’s largest PET and recycled PET resin producer allow IVL to leverage a closed-loop system. In 2020 IVL invested in three additional recycling facilities and recently acquired CarbonLite’s recycling assets in Texas.

DyStar Releases 2020 – 2021 Integrated Sustainability Report (c)dystar
Sustainability Performance Report 2020-2021
13.10.2021

DyStar Releases 2020 – 2021 Integrated Sustainability Report

DyStar is pleased to announce the release of its eleventh annual Sustainability Performance Report. The report is written in accordance with the GRI Standards: Core option, while using the Integrated Reporting <IR> framework to communicate how DyStar drives value creation across multiple stakeholder groups in six capital categories, namely financial, manufactured, intellectual, natural, human capital and social capital.

In FY2020, COVID-19 has continued to present its challenges, such as the shortage of raw materials and rising freight costs. Gloomy global demand has also resulted in some raw and product material wastage in production plants worldwide, leading to increased non-hazardous waste output for FY2020. DyStar recognizes these global factors in play and will continue to make active efforts within the organization’s capability to reduce its environmental footprint in the years ahead.

DyStar is pleased to announce the release of its eleventh annual Sustainability Performance Report. The report is written in accordance with the GRI Standards: Core option, while using the Integrated Reporting <IR> framework to communicate how DyStar drives value creation across multiple stakeholder groups in six capital categories, namely financial, manufactured, intellectual, natural, human capital and social capital.

In FY2020, COVID-19 has continued to present its challenges, such as the shortage of raw materials and rising freight costs. Gloomy global demand has also resulted in some raw and product material wastage in production plants worldwide, leading to increased non-hazardous waste output for FY2020. DyStar recognizes these global factors in play and will continue to make active efforts within the organization’s capability to reduce its environmental footprint in the years ahead.

The Group has set its sight on achieving the 2025 sustainability target of reducing its production footprint by 30% from 2011 levels for every ton of production. “We will continue to innovate and develop a wide range of products and processes that improve environmental performance and reduce carbon footprint across our value chain”, said Mr Xu Yalin, Executive Board Director of DyStar Group.

Mr Eric Hopmann, CEO of DyStar Group added: “We are also developing various projects in anticipation of future demands from customers as well as adopting more environmentally friendly technologies and improve our workflows and processes. Some of our projects include traceability programs, adopting renewable energy technologies, and digitalizing our business processes.” Understanding the importance of collaborative efforts to drive sustainability across the value chain, DyStar seeks to continually support industrial innovations and develop strategic partnerships to work towards becoming a sustainable and trusted leader in the industry.

Source:

DyStar Press Info

Livinguards Pro Maske ausgezeichnet als Nachhaltigkeitsprodukt des Jahres (c) Livinguard
Pro Mask Livinguard
08.09.2021

Livinguards Pro Maske ausgezeichnet als Nachhaltigkeitsprodukt des Jahres

  • Dieser Preis unterstreicht Livinguards Bestreben, ein nachhaltigeres Leben zu ermöglichen.

Das Schweizer Hygiene-Unternehmen Livinguard, das Schutzmasken mit COVID-19-deaktivierenden Eigenschaften entwickelt hat, gab heute bekannt, dass seine Pro Mask die Auszeichnung als bestes Nachhaltigkeitsprodukt 2021 von der Business Intelligence Group erhalten hat. Mit den prestigeträchtigen Sustainability Awards werden Menschen, Teams und Organisationen ausgezeichnet, die Nachhaltigkeit zu einem festen Bestandteil ihrer Geschäftspraktiken oder ihrer Firmenmission gemacht haben. Zu den bisherigen Preisträgern gehören Hilton Hotels Supply Management, Dow und Belkin.

Livinguard hat es sich zur Aufgabe gemacht, Hygiene neu zu definieren, um Verbraucher und den Planeten zu schützen. Die patentierten und revolutionären Technologien des Unternehmens verleihen Textilien, Papier, Kunststoffen und anderen Materialien die Fähigkeit, Keime kontinuierlich, dauerhaft und sicher zu vernichten. Im Kern geht es bei der permanenten Hygiene darum, mit weniger Aufwand bessere hygienische Bedingungen zu erreichen – heute und für künftige Generationen.

  • Dieser Preis unterstreicht Livinguards Bestreben, ein nachhaltigeres Leben zu ermöglichen.

Das Schweizer Hygiene-Unternehmen Livinguard, das Schutzmasken mit COVID-19-deaktivierenden Eigenschaften entwickelt hat, gab heute bekannt, dass seine Pro Mask die Auszeichnung als bestes Nachhaltigkeitsprodukt 2021 von der Business Intelligence Group erhalten hat. Mit den prestigeträchtigen Sustainability Awards werden Menschen, Teams und Organisationen ausgezeichnet, die Nachhaltigkeit zu einem festen Bestandteil ihrer Geschäftspraktiken oder ihrer Firmenmission gemacht haben. Zu den bisherigen Preisträgern gehören Hilton Hotels Supply Management, Dow und Belkin.

Livinguard hat es sich zur Aufgabe gemacht, Hygiene neu zu definieren, um Verbraucher und den Planeten zu schützen. Die patentierten und revolutionären Technologien des Unternehmens verleihen Textilien, Papier, Kunststoffen und anderen Materialien die Fähigkeit, Keime kontinuierlich, dauerhaft und sicher zu vernichten. Im Kern geht es bei der permanenten Hygiene darum, mit weniger Aufwand bessere hygienische Bedingungen zu erreichen – heute und für künftige Generationen.

Die wiederverwendbare Pro Mask von Livinguard ist als medizinische Maske Typ I zertifiziert, zerstört Viren und Bakterien und verhindert deren Ausbreitung – einschließlich SARS-CoV-2 (COVID-19). Die Technologie von Livinguard wurde umfänglich getestet und ist sicher für Haut und Atemwege. Livinguard-Produkte sind mindestens 30-Mal waschbar. Bei täglichem Gebrauch und wöchentlichem Waschen kann die Maske bis zu 210-Mal verwendet werden, was den Bedarf an 210 herkömmlichen Masken ersetzen kann. Bislang hat Livinguard mehr als 20 Millionen Masken verkauft, die umgerechnet mehr als 4,2 Milliarden Einwegmasken und somit enorme Mengen an nicht-recyclebarem Abfall vermeiden können.

In einer Zeit, in der die Umweltkosten von medizinischen Einwegmasken in Frage gestellt werden, ist dies ein Beweis dafür, dass Schweizer Technologie Hygiene und Nachhaltigkeit miteinander verbinden kann.

(c) Officina+39
31.08.2021

Officina+39 presents Better Seasons collection at Munich Fabric Start

The Italian company Officina+39 will be at Bluezone’s KEYHOUSE area to present its latest sustainable achievements in the field of research and chemical application for the textile sector as well as The Circle Book 2, a special project with circularity as main focus.  
 
For the first time since Covid-19 pandemic hit the world, Munich Fabric Start returns to host some of the most renowned international players in the textile and fashion industry, showcasing their latest innovations. From August 31 to September 1, Officina+39 will step into the Bluezone’s KEYHOUSE area, the interactive hub featuring futuristic solutions with a high level of innovation for the textile supply chain, to present its Better Seasons collection as well as its most recent developments.
 

The Italian company Officina+39 will be at Bluezone’s KEYHOUSE area to present its latest sustainable achievements in the field of research and chemical application for the textile sector as well as The Circle Book 2, a special project with circularity as main focus.  
 
For the first time since Covid-19 pandemic hit the world, Munich Fabric Start returns to host some of the most renowned international players in the textile and fashion industry, showcasing their latest innovations. From August 31 to September 1, Officina+39 will step into the Bluezone’s KEYHOUSE area, the interactive hub featuring futuristic solutions with a high level of innovation for the textile supply chain, to present its Better Seasons collection as well as its most recent developments.
 
The new collection embodies the company’s pillars of Trustainable approach – innovation, sustainable practices, clean information, transparency and social responsibility –, delivering a selection of bold, colorful and conscious solutions for the textile industry. These explore better ways to produce and use less through cuttingedge technologies, specifically developed to reduce the use of energy and hazardous chemicals while increasing waste recycling and water conservation.

More information:
Officina+39 munich fabric start
Source:

Menabò Group srl for Officina+39

21.07.2021

Green fashion community to meet at INNATEX

The 48th INNATEX is opening its doors at the Messecenter Rhein-Main in Hofheim-Wallau from 31 July to 2 August 2021. More than 200 labels are poised to appear at the international trade fair for sustainable textiles. Following a long string of industry gatherings being cancelled due to COVID-19, the summer trade fair is a first opportunity for the sector to get together. All visitors are required to register digitally  in advance of the fair.

The pandemic has presented an opportunity to launch new projects. They include a special zone created in collaboration with GIZ GmbH, the German society for international development, which will shine a light on African designers. 13 labels from Ethiopia, Kenya, Rwanda, South Africa, Tanzania, and Uganda will present their ideas for sustainable textiles and fashion products.

The starting point for the special area is a virtual trade fair, commissioned by the Federal Ministry for Economic Cooperation and Development. GIZ GmbH has realised the joint project in cooperation with several partners; its physical extension can be visited at INNATEX.

The 48th INNATEX is opening its doors at the Messecenter Rhein-Main in Hofheim-Wallau from 31 July to 2 August 2021. More than 200 labels are poised to appear at the international trade fair for sustainable textiles. Following a long string of industry gatherings being cancelled due to COVID-19, the summer trade fair is a first opportunity for the sector to get together. All visitors are required to register digitally  in advance of the fair.

The pandemic has presented an opportunity to launch new projects. They include a special zone created in collaboration with GIZ GmbH, the German society for international development, which will shine a light on African designers. 13 labels from Ethiopia, Kenya, Rwanda, South Africa, Tanzania, and Uganda will present their ideas for sustainable textiles and fashion products.

The starting point for the special area is a virtual trade fair, commissioned by the Federal Ministry for Economic Cooperation and Development. GIZ GmbH has realised the joint project in cooperation with several partners; its physical extension can be visited at INNATEX.

Exhibitors include well-known pioneers and young newcomers
The IVN (International Association of Natural Textile Industry), which sponsors INNATEX, is staging its own pop-up showroom. In doing so, the association is creating its own curated space, showcasing the diversity and special features of its members. The future objective is to expand this space with the organiser to create a growing Concept Area that introduces visitors to different ways of presenting green fashion.

Besides the IVN, the Global Organic Textile Standard, the Green Button and Fairtrade are among the other standardisation bodies represented at the fair. In addition, a special exhibition entitled “Fashion in the Hood” (Fashion im Kiez) and delivered by the young interest group “Frankfurt Fashion Movement”, helps visitors join the dots in the fashion industry. Among the labels exhibiting at the fair for the first time are Active Wear by Klitmøller Collective from Denmark, Organic Fashion by Bibico from the UK and Italian sneaker brand ACBC.

More information:
INNATEX
Source:

UBERMUT GbR für INNATEX

World of Wipes® International Conference Expected to Draw More than 400 Attendees July 12-15 in Atlanta (c) WOW
WOW 2021
21.06.2021

Nonwovens Industry Demonstrates Readiness to Return to Business In-Person

  • World of Wipes® International Conference Expected to Draw More than 400 Attendees July 12-15 in Atlanta

As business activity emerges with renewed enthusiasm post-pandemic, more than 400 attendees are expected to attend the World of Wipes® International Conference July 12-15 at the Atlanta Marriott Marquis with over 50 tabletop exhibits at the two evening receptions.

In a sign of the industry’s strong desire to return to business in-person, INDA is anticipating a full show for a dynamic interactive experience with wipes industry professionals at WOW 2021. With less than a month to go, over 350 wipes professionals have already registered and registration remains open.

“We are pleased to open our doors for WOW 2021 and have our wipes professionals gather once again for face-to-face business, educational program content and social interactions,” said Dave Rousse, INDA President. “INDA is looking forward to welcoming industry friends to re-engage and bringing attendees together to forge new relationships.”

  • World of Wipes® International Conference Expected to Draw More than 400 Attendees July 12-15 in Atlanta

As business activity emerges with renewed enthusiasm post-pandemic, more than 400 attendees are expected to attend the World of Wipes® International Conference July 12-15 at the Atlanta Marriott Marquis with over 50 tabletop exhibits at the two evening receptions.

In a sign of the industry’s strong desire to return to business in-person, INDA is anticipating a full show for a dynamic interactive experience with wipes industry professionals at WOW 2021. With less than a month to go, over 350 wipes professionals have already registered and registration remains open.

“We are pleased to open our doors for WOW 2021 and have our wipes professionals gather once again for face-to-face business, educational program content and social interactions,” said Dave Rousse, INDA President. “INDA is looking forward to welcoming industry friends to re-engage and bringing attendees together to forge new relationships.”

The three-day conference will deliver the latest insights and material science developments in key areas for business growth in this vital market with themes focused on sustainability issues, the impact of COVID-19 on consumer wipes, regulatory trends, flushability and more.

WOW 2021 Highlights

July 12 – The learning gets started with the separate one-and-a-half-day WIPES Academy led by Chris Plotz, INDA Director of Education and Technical Affairs, providing critical training on research, development and manufacturing of wipes. WOW 2021 will officially kick off with an evening welcome reception in the Marriott’s Imperial Foyer.

July 13 – WOW attendees are greeted by INDA’s President, Dave Rousse. The compelling conference program gets underway with the following sessions:

  • Wipes and the Growing Plastics Debate
  • Government Affairs Update 
  • The Confusing World of Regulations Impacting the Disinfecting and Sanitizing Wipes
  • Presentations by the three finalists for the World of Wipes Innovation Award® – Kimberly-Clark Scott Sanitizing Wipes, Lenzing™ Lyocell Skin fibers and Shark

July 14 – Industry-leading experts will present on thought-provoking topics related to wipes trends, innovations, sustainable packaging and the impact of COVID-19 during this packed second day. Among the not-to-be-missed sessions are:

  • Trends in the Wipes Market and Among Consumers
  • Innovation in Wet Wipe Preservatives
  • COVID-19 Impact on Wipes Consumption and Cleaning Habits
  • Sustainable Packaging and Dispensing for Wipes 

July 15 – Sustainability will be a headliner for this third day as well as the presentation of INDA’s prestigious award for innovation.

  • Nonwoven Substrates for More Sustainable Wipes
  • Flushable Wipes: Loved by Consumers, Wrongly Accused by Utilities

In addition to the strong conference content, at least 50 companies will exhibit their products and services during two evenings of one-and-a-half-hour tabletop exhibitions with networking receptions.

WOW 2021 will conclude with the exciting announcement of the World of Wipes Innovation Award® by Dave Rousse.

In addition to the live component, a conference recording will be available on demand two weeks after the event. INDA maintains its commitment to adhering to all CDC protocols and guidelines for a safe event. For the full event details, visit the WOW website.

16.06.2021

Closed-loop recycling pilot project for single-use facemasks

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

“Recognizing the challenge, we set out to explore how used facemasks could potentially be returned into the value chain of new facemask production”, says Dr. Peter Dziezok, Director R&D Open Innovation at P&G. “But creating a true circular solution from both a sustainable and an economically feasible perspective takes partners. Therefore, we teamed up with Fraunhofer CCPE and Fraunhofer UMSICHT’s expert scientists and SABIC’s Technology & Innovation specialists to investigate potential solutions.”

As part of the pilot, P&G collected used facemasks worn by employees or given to visitors at its manufacturing and research sites in Germany. Although those masks are always disposed of responsibly, there was no ideal route in place to recycle them efficiently. To help demonstrate a potential step change in this scenario, special collection bins were set up, and the collected used masks were sent to Fraunhofer for further processing in a dedicated research pyrolysis plant.

“A single-use medical product such as a face mask has high hygiene requirements, both in terms of disposal and production. Mechanical recycling, would have not done the job”, explains Dr. Alexander Hofmann, Head of Department Recycling Management at Fraunhofer UMSICHT. “In our solution, therefore, the masks were first automatically shredded and then thermochemically converted to pyrolysis oil. Pyrolysis breaks the plastic down into molecular fragments under pressure and heat, which will also destroy any residual pollutants or pathogens, such as the Coronavirus. In this way it is possible to produce feedstock for new plastics in virgin quality that can also meet the requirements for medical products”, adds Hofmann, who is also Head of Research Department “Advanced Recycling” at Fraunhofer CCPE.

The pyrolysis oil was then sent to SABIC to be used as feedstock for the production of new PP resin. The resins were produced using the widely recognized principle of mass balance to combine the alternative feedstock with fossil-based feedstock in the production process. Mass balance is considered a crucial bridge between today’s large scale linear economy and the more sustainable circular economy of the future, which today is operated on a smaller scale but is expected to grow quickly.

“The high-quality circular PP polymer obtained in this pilot clearly demonstrates that closed-loop recycling is achievable through active collaboration of players from across the value chain”, emphasizes Mark Vester, Global Circular Economy Leader at SABIC. “The circular material is part of our TRUCIRCLE™ portfolio, aimed at preventing valuable used plastic from becoming waste and at mitigating the depletion of fossil resources.”

Finally, to close the loop, the PP polymer was supplied to P&G, where it was processed into non-woven fibers material. “This pilot project has helped us to assess if the close loop approach could work for hygienic and medical grade plastics”, says Hansjörg Reick, P&G Senior Director Open Innovation. “Of course, further work is needed but the results so far have been very encouraging.”

The entire closed loop pilot project from facemask collection to production was developed and implemented within seven months. The transferability of advanced recycling to other feedstocks and chemical products is being further researched at Fraunhofer CCPE.

Source:

Fraunhofer

22.04.2021

Lenzing Group: Sustainability Report 2020

  • Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
  • New level of transparency in the textile industry: introduction of blockchain technology
  • Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes.

  • Successful measures to fight against the COVID-19 pandemic with a focus on the safety and health of employees, customers and partners and securing sustainable business development
  • Implementation of strategic investment projects and climate targets progressing on schedule – launch of first TENCEL™ branded carbon-zero fibers
  • New level of transparency in the textile industry: introduction of blockchain technology
  • Target setting: Lenzing raises the bar even higher and sets new sustainability goals

The Lenzing Group presented its Sustainability Report 2020 on April 22, 2021, World Earth Day. Featuring the title “Stand up for future generations”, Lenzing once again emphasized its commitment to taking responsibility beyond the products it makes. The non-financial report, prepared in accordance with the reporting standards of the Global Reporting Initiative (GRI) and the Austrian Sustainability and Diversity Improvement Act (NaDiVeG) and reviewed by KPMG Austria GmbH Wirtschaftsprüfungs- und Steuerberatungsgesellschaft, illustrates how the company is responding to the global challenges of our time.

The 2020 financial year of the Lenzing Group was largely dominated by the COVID-19 pandemic. Lenzing took short-term measures to safeguard its business operations and mitigate the effects of fiber prices and fiber demand which came under increasing pressure. The priority was to protect employees and strengthen long-term partnerships with suppliers and customers. Following the current fight against the coronavirus and its consequences, the company continues to move ahead determinedly to achieve its sustainability targets, also against the backdrop of such a difficult market environment.

With the implementation of its science-based targets, the Lenzing Group actively contributes to mastering the problems caused by climate change. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions by 50 percent per ton of product by 2030. The overriding target is to be climate-neutral by 2050.*

The launch of the first carbon-zero TENCEL™ fibers certified as CarbonNeutral® products in accordance with The CarbonNeutral Protocol – the leading global framework for carbon neutrality – represents another important milestone from the reporting year. As of June 2021, Lenzing will also market the first VEOCEL™ branded lyocell fibers as certified CarbonNeutral® products.

Promoting the circular economy
Lenzing also sets standards for the entire fiber, textile and clothing industry with respect to the circular economy which is of such crucial importance in climate and resource protection. In order to enhance resource efficiency and offer a solution for the global problem of textile waste, the company developed the REFIBRA™ recycling technology. REFIBRA™ is the only technology in the world enabling the production of new lyocell fibers on a commercial scale from cotton scraps derived from manufacturing cotton clothing as well as from used garments. In this way, an important contribution is made to promoting circularity in the textile industry.*

New level of transparency in the textile industry
In addition to environmental protection, the issue of transparency along the supply chain poses a major challenge to the textile industry. Working in cooperation with TextileGenesis™, Lenzing offers an innovative solution to ensure greater transparency on the basis of blockchain technology. Following several successful pilot projects with renowned fashion brands, this digital platform was ultimately launched in 2020 to enable the traceability of textiles, from the fiber to all stages of production and distribution. Thanks to the innovative Fibercoin™ technology of the TextileGenesis™ platform, Lenzing and its partners are able to issue so-called “blockchain assets” in direct proportion to the physical fiber deliveries of the brands TENCEL™ and LENZING™ ECOVERO™. These digital assets function like a “fingerprint” and thus prevent adulteration.*

Target setting: Lenzing raises the bar even higher
The Lenzing Group operates in line with three strategic principles within the context of its “Naturally positive” sustainability strategy: partnering for change, advancing circularity and greening the value chain.*

 

*See attached document for more information..

14.04.2021

Resolutions adopted by the virtual Annual General Meeting of Lenzing AG

At the 77th Annual General Meeting of Lenzing AG, which was once again held virtually on April 14, 2021 via livestream due to the COVID-19 pandemic, the members of the Managing Board and Supervisory Board were formally discharged from liability for the business year 2020. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual financial statements and consolidated annual financial statements for the business year 2021.

Furthermore, the Annual General Meeting adopted the resolution on the compensation to be paid to Supervisory Board members as well as the principles underlying the remuneration of the members of the Managing Board. In addition to financial performance criteria, the remuneration policy of Lenzing AG regulating the multi-year, performance-oriented remuneration paid to the Managing Board members will also be linked in the future to non-financial sustainability criteria (ESG) designed to further promote the sustainable business strategy of Lenzing AG.

At the 77th Annual General Meeting of Lenzing AG, which was once again held virtually on April 14, 2021 via livestream due to the COVID-19 pandemic, the members of the Managing Board and Supervisory Board were formally discharged from liability for the business year 2020. KPMG Austria GmbH Wirtschaftsprüfungs- u. Steuerberatungsgesellschaft was appointed to serve as the auditor of the annual financial statements and consolidated annual financial statements for the business year 2021.

Furthermore, the Annual General Meeting adopted the resolution on the compensation to be paid to Supervisory Board members as well as the principles underlying the remuneration of the members of the Managing Board. In addition to financial performance criteria, the remuneration policy of Lenzing AG regulating the multi-year, performance-oriented remuneration paid to the Managing Board members will also be linked in the future to non-financial sustainability criteria (ESG) designed to further promote the sustainable business strategy of Lenzing AG.

Fully on track strategically
The Managing Board of Lenzing AG presented the business development of the year 2020, a strategic outlook and sustainability strategy including the relevant roadmap to achieve climate targets to the participating shareholders. In 2019, Lenzing made a strategic commitment to reducing its greenhouse gas emissions per ton of product by 50 percent by the year 2030. The goal is to operate in a climate-neutral manner by 2050.

The substantial investments made in Thailand and Brazil not only support Lenzing in its transformation to a supplier of environmentally compatible specialty fibers but also comprise an important milestone on this journey which sustainably increases the company’s enterprise value.

The implementation of these two key projects is proceeding ahead as planned in spite of the direct impacts of the coronavirus crisis. The pulp plant in Brazil is scheduled to be put into operation in the first half of 2022 and will significantly increase Lenzing’s own in-house supply of dissolving pulp. Production in Thailand is expected to commence towards the end of 2021, further raising the share of eco-friendly specialty fibers in the Lenzing product portfolio.

New appointments to the Supervisory Board
Dr. Veit Sorger retired from the Supervisory Board of Lenzing AG on his request effective at the end of the Annual General Meeting. Veit Sorger had been a Member of the Supervisory Board since 2004 (also serving as Deputy Chairman since 2011) and served on various Supervisory Board committees.

The Annual General Meeting elected Dr. Markus Fürst, Managing Director of B&C Industrieholding GmbH, and Thomas Cord Prinzhorn, MBA, CEO of Prinzhorn Holding GmbH, to serve on the Supervisory Board until the end of the Annual General Meeting resolving upon the discharge of the Supervisory Board members for the business year 2024.

Source:

Lenzing AG