From the Sector

Last week, the White House announced that President Joe Biden would not implement a tariff rate quota on imports of fine-denier polyester staple fiber (PSF) in response to a section 201 safeguard case filed by U.S.-based fiber producers.

The President announced an import quota only on imports of fine-denier PSF under the temporary importation under bond (TIB) program, which is predominately used in woven textiles and apparel and is not expected to impact nonwovens.

President Biden opted not to implement a tariff rate quote or other measures that were recommended by the U.S. International Trade Commission citing that other industries, including nonwoven manufacturers, would be negatively impacted by such actions, President Biden’s proclamation stated that:

“While the USITC Commissioners recommended that I impose a tariff-rate quota on fine denier PSF imports, I have determined not to do so…[t]herefore, I have decided to tailor this safeguard remedy to TIB entries of fine denier PSF. Furthermore, I have determined not to impose a tariff-rate quota on imports of fine denier PSF in the interest of balancing the competing interests of domestic fine denier PSF manufacturers and the impact of the safeguard remedy on downstream United States producers, including manufacturers of textiles, defense products, and consumer products, that rely on fine denier PSF.”

This decision comes after several U.S.-based nonwovens producers commented to the White House Trade Policy Staff Committee and the USITC that the nonwovens industry would be harmed by actions that would raise the costs of fine-denier PSF. INDA submitted comments outlining the concerns of many nonwovens producers. Government affairs director Wes Fisher testified before the Trade Policy Staff Committee at the Office of the U.S. Trade Representative hearing on September 30th.

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued the following statement on news of the passing of Congressman Bill Pascrell (D-NJ).

Statement by NCTO President and CEO Kim Glas:

"The entire U.S. textile industry is mourning the loss of Congressman Bill Pascrell (D-NJ), a true leader and advocate for critical manufacturing policies aimed at bolstering the domestic supply chain and confronting ongoing threats from predatory trade practices.

We commend his significant contributions – not just to the U.S. domestic industry—but for American manufacturers and workers everywhere.

Rep. Pascrell had served as co-chair of the House Textile Caucus with Rep. Patrick McHenry (R-NC) since 2013 and was an ardent fighter for the U.S. textile industry and beyond.

In April, Congressman Pascrell championed a bill titled the Import Security and Fairness Act led by Rep. Earl Blumenauer (D-OR) that would exclude all Chinese imports from de minimis treatment, as highlighted in our blog post on a House Ways & Means markup.

He also penned an op-ed with Congressman McHenry highlighting the urgent need to drive investment and for onshoring and nearshoring textile and apparel production and to not weaken the critical U.S. and Central America  Dominican Republic-Central America Free Trade Agreement (CAFTA-DR)..

In addition, he co-sponsored legislation aimed at strengthening the American PPE supply chain which would expand the Berry Amendment to nearly all federal purchases of PPE.

As is evidenced above, Congressman Pascrell took on every policy battle in support of U.S. textiles and manufacturing in general as an unwavering supporter of maintaining and expanding a vital domestic manufacturing chain.  He worked closely with Rep. McHenry on critical textile issues to advance the cause for our domestic industry and its workforce.

He will be missed deeply by the industry and to all who knew him. We extend our gratitude to a manufacturing warrior and express our condolences to the entire Pascrell family and his staff team."

National Council of Textile Organizations (NCTO) President and CEO Kim Glas issued the following statement welcoming the introduction of the bipartisan “Protecting American Industry and Labor from International Trade Crimes Act,” a bill that aims to combat trade fraud and hold those committing the crimes accountable.

Statement by NCTO President and CEO Kim Glas:
“We commend Chairman John Moolenaar (R-MI) and Ranking Member Raja Krishnamoorthi (D-IL), who lead the House Select Committee on the CCP, along with Congresswoman Ashley Hinson (R-IA) and others for introducing this bipartisan legislation that will put real teeth into combatting trade crimes that are undermining American textile and apparel manufacturers.

“NCTO has called for additional federal tools and resources to urgently address the pervasive trade crimes impacting our industry as well as other U.S. manufacturing sectors. We are pleased that this legislation will do exactly that by establishing a formal structure within the Department of Justice’s Criminal Division dedicated to aggressively prosecute international trade crimes.

“The U.S. textile and apparel supply chain has been severely harmed by rampant trade fraud, including an onslaught of imported products made with forced labor, which circumvent the U.S. ban on these imports, fraudulent rules of origin claims under our free trade agreements, and evasion of duties through abuse of the de minimis trade loophole. This had resulted in the closure of 18 textile plants over the past several months and job losses, combined with closures in Western Hemisphere trade partners who have suffered tens of thousands of job losses.

“We believe this bipartisan legislation is a critical step forward in confronting such massive fraud and will serve to hold bad actors accountable and help shield our vital domestic industries from these crimes.”

Fashion for Good launches the Sorting for Circularity USA report unveiling significant findings from the project. A first of its kind in the US, the report delves into consumer disposal behaviour, textile waste composition, and the potential for fibre-to-fibre recycling within the country. It provides insights for making informed decisions for further investments, infrastructure development and the next steps towards circularity.

The U.S. Textile Waste Landscape
The United States is a global leader in textile consumption and waste generation, positioning itself as one of the largest sources of secondary raw materials for post-consumer textile feedstock. Despite this, only 15% of the textile waste generated in the US is currently recovered, with 85% ending up in landfills or incinerators.

With the impending policies in the European Union and certain American states, alongside commitments from both public and private sectors to promote fibre-to-fibre recycling, there is a growing demand for infrastructure related to post-consumer textile collection, sorting, and recycling.

Addressing Data GPS
In the pursuit of establishing a functional reverse supply chain and the necessary infrastructure, two critical areas lack data  – consumer disposal behaviour, and material characteristics of post-consumer textiles. The Sorting for Circularity USA project addressed these gaps through a comprehensive national consumer survey and waste composition analysis.

The survey revealed that 60% of respondents divert textiles, while 4% discard them, driven primarily by factors such as condition and fit. On the other hand, the waste composition analysis unveiled that over 56% of post-consumer textiles are suitable for fibre-to-fibre recycling, with cotton and polyester being the most prevalent fibre types, indicating a substantial potential for these textiles to be used as feedstock for mechanical and chemical recycling processes.

The project revealed a $1.5 billion opportunity for fibre-to-fibre recycling by redirecting non-rewearable textiles from landfills and incinerators to recycling streams. The report outlines growth strategies for the US textile recycling industry, emphasising enhanced financial value through efficiency improvements, increased commodity valuation, and policy mechanisms like extended producer responsibility schemes. Collaboration among stakeholders is crucial, including brands, government, retailers, consumers, collectors, sorters, recyclers, and financial institutions, to promote circularity, invest in research and development, and advocate for supportive policies and incentives to drive technological innovation. This redirection of textiles towards recycling underscores the substantial economic potential of embracing circularity in the textile industry.
 
There is an opportunity to build on these insights and assess the feasibility of different sorting business models and (semi) automated sorting technologies to create a demo facility suitable for closed-loop textile recycling. Ultimately, evaluating the commercial and technical feasibility of a semi-automated sorting process and identifying investment opportunities to scale solutions nationwide.

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber through finished sewn products, held its officer elections for fiscal year 2024 at its annual meeting April 9-11.
NCTO has elected Charles Heilig, President of Parkdale Mills, as Chairman; and Chuck Hall, President and CEO of Barnet, as Vice Chairman.

In addition to the appointment of a new chairman and vice chairman, NCTO elected chairs for each of its five councils. NCTO is comprised of five councils to ensure a broad representation of the industry supply chain. Each council has an allotted number of members who are elected to the association’s Board of Directors, in addition to the Executive Committee.

Elected as NCTO Chairman and Vice Chairman for 2024:

• Chairman – Charles Heilig, President of Parkdale Mills based in Gastonia, North Carolina, a leading American manufacturer of yarn and cotton consumer products.
• Vice Chairman – Chuck Hall, President and CEO of Barnet based in Spartanburg, South Carolina, a 125-year-old manufacturer of technical textiles.

Elected to the NCTO Board of Directors:

• Fiber Council – David Adkins of Lenzing; John Freeman of Nan Ya Plastics; and Melissa Stewart of The LYCRA Company
• Yarn Council – Justin Ferdinand of Kentwool; Peter Iliopoulos of Gildan; Eddie Ingle of Unifi; Eric Noe of Buhler Quality Yarns; Marvin Smith of Shuford Yarns; and Jay Todd of Service Thread
• Fabric and Home Products Council – David Smith of Milliken & Company; James McKinnon of Cotswold Industries; Blake Millinor of Valdese Weavers; Leib Oehmig of Glen Raven; Dan Russian of Sage Automotive Interiors; and Walter Spiegel of Standard Textile
• Finished Textiles and Apparel Products Council – Marisa Fumei-South of Two-One-Two New York (Alternate: Gabrielle Ferrara of Ferrara Manufacturing)
• Industry Support Council – Todd Bassett of Fi-Tech; Greg Duncan of American Truetzschler; and Jim Reed of YKK Corp.

Elected by their respective Councils to serve on the Executive Committee:
David Adkins, Lenzing; Eddie Ingle, Unifi; Marvin Smith, Shuford Yarns; David Smith, Milliken & Company; James McKinnon, Cotswold Industries; Marisa Fumei-South, Two-One-Two New York; Gabrielle Ferrara, Ferrara Manufacturing; and Todd Bassett, Fi-Tech.

NCTO Chairman Charles Heilig has elected additional executives to serve on the Executive Committee: Anderson Warlick of Parkdale Mills; Norman Chapman of Inman Mills; John Maness of Gildan; Amy Bircher Bruyn of MMI Textiles; and Jackie Ferrari of American Fashion Network.

Elected to chair the Councils:

• Fiber Council: David Adkins of Lenzing
• Yarn Council: Justin Ferdinand of Kentwool
• Fabric and Home Products Council: David Smith of Milliken & Company
• Finished Textiles and Apparel Products Council: Marisa Fumei-South of Two-One-Two New York.
• Industry Support Council: Todd Bassett of Fi-Tech

INDA held an Advocacy Summit in Washington, D.C. in partnership with ISSA’s, The Worldwide Cleaning Industry Association, 2024 Clean Advocacy Summit. Over the course of two days, INDA members took to the nation’s capital to convene, connect, and advocate for issues important to the nonwovens industry, meeting with the staff and elected officials in over a dozen congressional offices.  

A key focus of these congressional meetings was education and support for the passage of the WIPPES Act (H.R.2964 / S.1350), the federal effort to implement consistent national Do Not Flush Labeling standards for non-flushable wipes. They also advocated for the renewal of the Miscellaneous Tariff Bill to provide tariff relief on items without domestic production as well as discussed various trade policy issues.

The advocacy summit portion of the event included panels on Wipes Policy, consumer education, international trade, plastics, and PFAS. Speakers included Dr. Laurie-Ann Agama, Acting Assistant U.S. Trade Representative for Textiles, James Willett, International Economist for the International Trade Administration, Sarah Sapirstein, federal lobbyist for the California Association of Sanitation Agencies, Lara Wyss, President of the Responsible Flushing Alliance, Jason Eberstein of the Plastics Industry Association, and Shawn Swearingen of the American Chemistry Council.

In a move to enhance the global competitiveness of the Turkish apparel industry, the Istanbul Apparel Exporters' Association (IHKIB) has entered into a collaborative agreement with the Worldwide Responsible Accredited Production (WRAP).

IHKIB, representing 80% of Türkiye's apparel exports, aims to facilitate and guide its members in navigating new markets and staying abreast of sectoral developments.
WRAP, a US-based non-profit organization, focuses on promoting safe, lawful, humane, and ethical working conditions within the textile and apparel industry.

Mr. Selcuk Mehmet Kaya, Chairman of the International Relations and Sustainability Committee of IHKIB, and Mr. Avedis Seferian, President and CEO of WRAP, officially inked a collaboration agreement on March 8, 2024, marking a significant step towards fostering business relations between Türkiye and the USA. The agreement focuses on a pilot project developed by IHKIB and WRAP, aiming to identify leading Turkish apparel companies exporting to the USA and encouraging these facilities to attain WRAP certification. In return, WRAP will provide in-person and virtual training at no charge to guide these facilities through the certification process. The project seeks to strengthen business ties between Türkiye and the USA, creating additional opportunities for mutual cooperation between the parties in both countries.

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

INDA, the Association of the Nonwoven Fabrics Industry, announced the conference program for Hygienix™ 2023, November 13-16 to be held at The Roosevelt New Orleans Hotel, New Orleans, LA.

The program details can be found on the Hygienix website.

The keynote speaker is Courtney Scharf, Chief Client Officer, Trend Hunter. Trend Hunter leverages big data, human researchers, and AI to identify consumer insights, and deep dive opportunities for the world’s most innovative companies, such as Unilever, Colgate-Palmolive, Georgia-Pacific, Kroger, Johnson & Johnson, Reckitt Benckiser, Samsung, and Bacardi. Trend Hunter utilizes Artificial Intelligence and research to identify and curate top insights and trends to advise brands and businesses in their pursuit of innovation.

The Hygienix program will feature thought leaders in consumer-centric innovations, the circular economy, raw material advancements in sustainability, opportunities for advanced recycling in absorbent hygiene, optimizing the packaging footprint, new approaches for odor control, and market trends and drivers.

Experts presenting at Hygienix include:

• Aquapak Polymers Ltd. – “Creating Sustainable Nonwovens for Hygiene Applications with Thermally Processable Polyvinyl Alcohol; A Water Soluble, Environmentally Friendly and High-Performance Polymer”
• Asahi Kasei Advance Corporation – “Continuous-Filament Cellulose Nonwovens”
• Confitex Technology – “Reusables Production: It’s Not All Green”
• Egal Pads, Inc. – “Closing the Circularity Gap One Used Pad at a Time”
• Essity – “Diaper Collection & Recycling in Australia”
• ExxonMobil Chemical Company – “Innovate New Levels of Strong Comfort with Hygiene Solutions”
• Henkel Corporation – “Reducing the Packaging Waste from Personal Hygiene Products”
• INNOVATEGRN – “Accelerating Innovation / Embracing a Consumer-Centric Approach”
• Kuraray Europe GmbH – “Safe and Eco-friendly Elastics for Absorbent Hygiene Products”
• Nexus Circular – “Increasing Plastics Circularity for the Hygiene Segment Through Advanced Recycling”
• W. Pelz GmbH –“Disposable Pads Meet Reusable Underwear”
• Price Hanna Consultants – “Squaring the Circle: Why Demonstration Projects = Good Sustainability Strategy” and “Wellness and Natural Materials”
• Rem Brands, Inc. – “Effective Reduction of Material Odors, In-use Odors, and Post-use Odors”
• Sequel – “Spiraling into Business: How a Dramatic Innovation to the Tampon Met the World’s Largest Manufacturer of Feminine Hygiene”
• Sparkle Innovations Inc. – Sustainability and Circularity in the Absorbent Hygiene Products Industry”

The Hygienix program will offer a hands-on workshop as well as two pre-conference webinars. Jim Robinson, Principal, Absorbent Hygiene Insights, LLC, will lead the in-person workshop on AHP Absorbent Hygiene Systems, Monday afternoon, November 13th. This workshop evaluates SAP absorption for different SAPs and participants have the opportunity to deconstruct and examine several hygiene products including infant, adult, and period care products to increase the understanding of these systems.

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration is open for FiltXPO™ 2023, Oct. 10-12, 2023, Navy Pier, Chicago, Illinois USA. More than 130 exhibitors from the filtration supply chain will showcase their solutions, technologies, and innovations to over 1,200 global professionals. FiltXPO will also feature a three-day technical program covering new technology, products, and research.

Exhibit stand reservations have been brisk, exceeding the prior two editions of FiltXPO. “We are pleased to see the strong interest in exhibiting at FiltXPO. It speaks to the strength of the industry and that filtration products continue to evolve for clean air and water, as well as safer food, beverages, and biopharmaceuticals,” said Joe Tessari, Associate Director of Exhibit Sales.

An important part of the FiltXPO event is the 1.5-day Filter Media Training Course. Participants will learn about the physics of filtration, how nonwoven media is designed and used in air and liquid filtration, the latest market trends, which applications have unmet needs, as well as testing standards.