From the Sector

Reset
802 results
12.10.2020

CHT Germany GmbH: Sustainable heat for sustainable chemical solutions

  • Efficient heat supply of the future reduces environmentally harmful CO2

The heating sector offers a variety of options for the energy turnaround. One of them is district heating. This is an efficient energy source that makes an important contribution to sustainability and climate protection, especially when used within heat and energy-intensive companies. The CHT Group for speciality chemicals has opted to utilise the district heating supplied by the Tübingen public utilities (swt) at its headquarters in Tübingen - and thus reduce CO2 and the use of fossil fuels. This also resulted in the district heating network of the municipal utilities being extended by an additional half kilometre.

  • Efficient heat supply of the future reduces environmentally harmful CO2

The heating sector offers a variety of options for the energy turnaround. One of them is district heating. This is an efficient energy source that makes an important contribution to sustainability and climate protection, especially when used within heat and energy-intensive companies. The CHT Group for speciality chemicals has opted to utilise the district heating supplied by the Tübingen public utilities (swt) at its headquarters in Tübingen - and thus reduce CO2 and the use of fossil fuels. This also resulted in the district heating network of the municipal utilities being extended by an additional half kilometre.

Until recently, heating, hot water and various process steam applications within the CHT site in Bismarckstrasse, Tubingen were fed from a central steam generation plant fired by heating oil. Now three of four company buildings are connected to the swt district heating network and the process steam applications have been decentralised. The fourth building has already been equipped with a modern CHP system for many years. In the future, this building will be prepared for district heating. The conversion to district heating supply will be made as soon as the CHP plant has reached the end of its operating life. In order to connect the CHT headquarters to the district heating, the municipal utilities have extended their supply network by around 570 metres during a four-month construction period. The heat now flows through newly installed transfer stations where it is measured, regulated, transferred and finally fed into the buildings' heating circuits.

Dr. Bernhard Hettich, Chief Technical Officer of CHT Germany GmbH: "As a company CHT focuses on worldwide sustainability. This not only includes products but also the sustainable use of resources at the individual locations. At our headquarters in Tübingen, our efforts are directed towards reducing energy consumption and optimising it with regard to renewable energies. With this investment we will continue to reduce CO2 emissions and the consumption of fossil fuels for the energy we consume. As a Tübingen company, we are therefore pleased to be connected to the local district heating network and to be able to use its advantages for the benefit of our sustainability strategy".

High heat demand offers great savings potential
CHT's heat requirements are high as the three buildings already connected require around 1.3 million kilowatt hours of heat per year. With the fourth building included, the heat requirement is even 1.6 million kilowatt hours. With the conversion to district heating CHT saves about 152 tons of CO2 per year. An investment in the district heating connection is therefore an investment in the future, both from an ecological and economic point of view. CHT has invested 180,000 Euro in the district heating connection.

 

Please read the attached document for more information

Source:

CHT Germany GmbH

World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy (c) pixabay
Cotton
07.10.2020

October, 7th: World Cotton Day

  • World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy

Bremen - Stemming from a 2019 initiative of the African Cotton-4 countries Benin, Burkina Faso, Chad and Mali, World Cotton Day will take place this year on 7 October. The event is organised by the Geneva-based World Trade Organisation (WTO) and is supported by the Food and Agriculture Organisation of the United Nations (FAO), the United Nations Conference on Trade and Development (UNCTAD), the International Trade Centre (ITC) and the International Cotton Secretariat (ICAC). The Bremen Cotton Exchange is also involved.

“Cotton is often underestimated because it is so natural. Behind it are millions of people, for example many farmers, field workers, employees in ginning factories, logistics providers and traders. We want to honour their achievements,” said the President of the Bremen Cotton Exchange, Stephanie Silber.

  • World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy

Bremen - Stemming from a 2019 initiative of the African Cotton-4 countries Benin, Burkina Faso, Chad and Mali, World Cotton Day will take place this year on 7 October. The event is organised by the Geneva-based World Trade Organisation (WTO) and is supported by the Food and Agriculture Organisation of the United Nations (FAO), the United Nations Conference on Trade and Development (UNCTAD), the International Trade Centre (ITC) and the International Cotton Secretariat (ICAC). The Bremen Cotton Exchange is also involved.

“Cotton is often underestimated because it is so natural. Behind it are millions of people, for example many farmers, field workers, employees in ginning factories, logistics providers and traders. We want to honour their achievements,” said the President of the Bremen Cotton Exchange, Stephanie Silber.

According to the WTO, the aim of World Cotton Day is to highlight the global economic importance of cotton and to raise awareness of the raw material by recognising the work of everyone involved in its cultivation, processing and trade. At the same time, within the framework of international cooperation, it is hoped that supporters and investors can be found to aid with technological and economic progress within the cotton value chain.

This time, the entire world cotton community will be involved in World Cotton Day on Wednesday, 7 October 2020. A wide variety of campaigns and events are taking place everywhere to draw attention to the importance of cotton and its possible uses.

Cotton is one of the most relevant agricultural raw materials in the world. Around 26 million tonnes of it are harvested annually. Approximately 150 million people in almost 80 countries around the world live from the cultivation of the natural fibre. A large number of these live in developing countries, where cotton cultivation is of particular importance as a cash crop.

Cotton is known as an agricultural product that is turned into a textile. The raw material is indispensable in fashion and clothing – and has been for thousands of years. But the use of cotton now goes far beyond textiles. For example, cosmetic products such as hand creams and hair shampoo are made from the oil of cotton seeds. The raw material is also used in the manufacture of banknotes, furniture and technical textiles, as well as in medical technology.

Against the background of the current discussion on sustainability and sustainable consumption, the role of natural fibres is becoming even more important. Cotton is biodegradable and a renewable resource. It can be grown again and again in agriculture through cultivation in crop rotation. This secures incomes and enables efficient value creation within the global production and processing chain.

The Bremen Cotton Exchange will actively support World Cotton Day with cross-media coverage. In addition, in time for World Cotton Day, three thematically different, emotionally appealing short films about cotton will be launched. They are aimed at consumers as customers of the textile and clothing trade and provide information about the benefits and properties of cotton and answer questions about its sustainability. In keeping with the times, they will be published via virtual media.

Lenzing (c) Lenzing Group
28.09.2020

New Nonwoven Development Center at Hof University goes on line in cooperation with Lenzing

On Thursday, September 24, the Lenzing Group, a leading manufacturer of wood-based cellulose specialty fibers, and Hof University opened a new Nonwoven Development Center (VEZ). As a strategic partner, Lenzing has access to a state-of-the-art development line at the campus in Münchberg with immediate effect. This offers new opportunities for sustainable fiber and nonwoven innovations for a wide range of applications including hygiene, body care and medical.

In line with the sCore TEN corporate strategy, the Lenzing Group is focusing on sustainable innovations, which are agreed in an optimum manner to the needs of the value chain. „We offer our customers and partners a decisive competitive advantage: agility. The pilot plant in the VEZ allows the resource-efficient development of fiber and nonwoven innovations on a small scale”, Jürgen Eizinger, Vice President Business Unit Nonwovens at Lenzing, explains.

On Thursday, September 24, the Lenzing Group, a leading manufacturer of wood-based cellulose specialty fibers, and Hof University opened a new Nonwoven Development Center (VEZ). As a strategic partner, Lenzing has access to a state-of-the-art development line at the campus in Münchberg with immediate effect. This offers new opportunities for sustainable fiber and nonwoven innovations for a wide range of applications including hygiene, body care and medical.

In line with the sCore TEN corporate strategy, the Lenzing Group is focusing on sustainable innovations, which are agreed in an optimum manner to the needs of the value chain. „We offer our customers and partners a decisive competitive advantage: agility. The pilot plant in the VEZ allows the resource-efficient development of fiber and nonwoven innovations on a small scale”, Jürgen Eizinger, Vice President Business Unit Nonwovens at Lenzing, explains.

The VEZ was completed according to schedule in September 2020, after Lenzing and the University of Hof signed a cooperation agreement for its use in 2019. The timing is perfect. Developments at political level, such as the directive (EU) 2019/904 of the European Parliament and of the Council of 5 June 2019 on the reduction of the impact of certain plastic products on the environment, increase demand for responsibly manufactured nonwovens. The so-called Single-Use Plastics Directive aims at building awareness and greater transparency with regard to wet wipes and feminine hygiene products.

With its VEOCEL™ branded wood-based cellulose fibers, Lenzing has been laying the foundation for many years for sustainable nonwoven applications and will test and develop innovative ideas using the new possibilities offered by the VEZ. „We are noticing increasing interest in sustainable concepts from biodegradable cellulose fibers“, Jürgen Eizinger sums up the market development of the last months and adds: „We are aware that the fibers used have an enormous influence on the final product. For this reason our commitment goes beyond fiber production.“

With the spunlace pilot plant at the VEZ, Lenzing will support customers and partners more intensively in the development of new nonwoven applications and at the same time promote cooperation in the field of marketing. In the previous year, the company already established new certification standards for the VEOCEL™ brand. Since then certified manufacturers can only use the VEOCEL™ logo with blends of biodegradable cellulose fibers. With this measure, the VEOCEL™ brand allows consumers to make a more conscious product selection.

With its #ItsInOurHands environmental initiative, the VEOCEL™ brand also actively contributes to creating awareness. More detailed information can be obtained on itsinourhands.com.

Source:

Lenzing Group

VacuFil (c) Oerlikon
24.09.2020

Recycling becomes a focus

Mountains of waste, plastic-infested oceans, negative CO2 footprints – the need for more sustainable ways of living has never been more urgent. Consequently, it is logical that recycling solutions are becoming increasingly important within the textile industry. This was also tapped into at the first virtual Global Fiber Congress in Dornbirn with a session that focused specifically on the topic. In front of around 400 participants, Markus Reichwein, Head of Product Management at Oerlikon Barmag, also spoke about solutions currently on the market.

As one of only manufactureres, the Oerlikon Group’s Manmade Fibers segment offers the entire mechanical recycling chain –from preparing the recycled materials, producing the melt all the way through to the textured package. Here, the company utilizes the VacuFil solution supplied by its subsidiary Barmag Brückner Engineering (BBE) –which, in addition to mastering bottle-to-bottle and bottle-to-textile processes, is also able to process textile waste into chips. This permits the running of textile production operations very much in line with the zero-waste philosophy.

Mountains of waste, plastic-infested oceans, negative CO2 footprints – the need for more sustainable ways of living has never been more urgent. Consequently, it is logical that recycling solutions are becoming increasingly important within the textile industry. This was also tapped into at the first virtual Global Fiber Congress in Dornbirn with a session that focused specifically on the topic. In front of around 400 participants, Markus Reichwein, Head of Product Management at Oerlikon Barmag, also spoke about solutions currently on the market.

As one of only manufactureres, the Oerlikon Group’s Manmade Fibers segment offers the entire mechanical recycling chain –from preparing the recycled materials, producing the melt all the way through to the textured package. Here, the company utilizes the VacuFil solution supplied by its subsidiary Barmag Brückner Engineering (BBE) –which, in addition to mastering bottle-to-bottle and bottle-to-textile processes, is also able to process textile waste into chips. This permits the running of textile production operations very much in line with the zero-waste philosophy.

VacuFil ensures a stable process in the case of recycled quality yarns
The reliable removal of contaminants is vital for a stable and efficient spinning process and outstanding yarn quality. At the same time, stable operating conditions with minimal fluctuations are essential. The greatest challenge here is the differing qualities of the bottle flakes fed into the system, as the extrusion process is barely able to balance these fluctuations. Here, the VacuFil concept counters with blending silos, which reduce the differences in the viscosity of the polymers considerably and guarantee high yarn and fabric quality.

The VacuFil concept is installed upstream to an Oerlikon Barmag POY system, which transforms the recycled melt into filament yarn of the accustomed high quality. As texturing solutions, Oerlikon Barmag offers its state-of-the-art automatic eAFK-series systems, including the latest generation of the eAFK Evo, which was unveiled at the ITMA Barcelona last year. Yarn manufacturers wishing to continue texturing manually can use the eFK series.

With the VarioFil R+, producers of smaller batches now also have a compact system with an integrated recycled materials preparation unit at their disposal. The system offers a special extrusion system for bottle flake materials, the very latest metering and mixing technology for spin-dying and expanded 2-stage melt filtration. The four spinning positions are each equipped with an Oerlikon Barmag 10-end WINGS POY winder.

While mechanical recycling has already been extensively developed, chemical recycling for mixed fabrics is still presenting the textile industry with huge challenges. The Oerlikon Group’s Manmade Fibers segment is currently working on solutions and concepts for transforming these fabrics into new textiles.

 

More information:
Oerlikon Sustainability Yarns
Source:

Oerlikon

Bio Composites Procedure (c) AZL Aachen GmbH
24.09.2020

Starting market and technology study on the Potential for bio-based composite materials

Sustainability and environmental responsibility are important developments for the current design of productions and products. In order to obtain a comprehensive evaluation of the potential of bio-based composites, the AZL, together with an industry consortium, is investigating the market potential, future applications and relevant technologies for bio-based composite materials. The 5-month market and technology study will start on October 22nd, 2020 and is open to interested companies. Companies such as REHAU, an Automotive Tier 1, Asahi Kasei, Johns Manville, Mahr Metering Systems and several material manufacturers are participating in the study.

Bio-plastics are well established in industry, especially in packaging applications. The market for biopolymers is expected to grow from USD 10.5 billion in 2020 to USD 27.9 billion in 2025. At the same time, bio-based raw materials, such as natural fibers, are available on the market in a cost-effective manner. Composites with wood or natural fiber content are also increasingly used in products.

Sustainability and environmental responsibility are important developments for the current design of productions and products. In order to obtain a comprehensive evaluation of the potential of bio-based composites, the AZL, together with an industry consortium, is investigating the market potential, future applications and relevant technologies for bio-based composite materials. The 5-month market and technology study will start on October 22nd, 2020 and is open to interested companies. Companies such as REHAU, an Automotive Tier 1, Asahi Kasei, Johns Manville, Mahr Metering Systems and several material manufacturers are participating in the study.

Bio-plastics are well established in industry, especially in packaging applications. The market for biopolymers is expected to grow from USD 10.5 billion in 2020 to USD 27.9 billion in 2025. At the same time, bio-based raw materials, such as natural fibers, are available on the market in a cost-effective manner. Composites with wood or natural fiber content are also increasingly used in products.

Dr. Michael Emonts, Managing Partner of AZL: "Together with our partner companies we want to identify hidden business potential for composites with bio-based materials. To do so, we will reapply our established approach for market and technology studies: Based on a detailed market analysis, we will dive deep into the technological evaluation of technologies, applications and business cases.”

Based on a detailed market segmentation, AZL's technology experts analyze the various market segments in terms of their size, growth potential, relevant players and existing and future applications. For the identified applications, the participants in the study will receive detailed insight into the respective technical and legal requirements as well as an overview of value chains, processes and materials. In the following, the strengths and challenges of bio-composites compared to conventional materials are elaborated. The consortium will select the components with the highest potential, for which suitable production scenarios will be developed and analyzed in terms of costs in a business case analysis.

"We are participating in the AZL study to identify and evaluate new product areas with bio-materials. The technological analyses of the AZL studies have already helped us in the past to initiate new developments," says Dr. Steven Schmidt, Director Technology Platforms Materials at REHAU, explaining the motivation for working with the AZL and the industry consortium. "As one of the 50 Sustainability & Climate Leaders, we at REHAU are incorporating environmentally friendly materials into more and more products. Wherever the company is active - from the furniture and construction industries to the automotive industry - REHAU is already developing and manufacturing high-quality products from recycled raw materials. By 2025, REHAU plans to increase its recycling rate across the Group to significantly more than 15 percent and at the same time reduce CO2 emissions by at least 30 percent," adds Dr. Steven Schmidt.

Bio-composites will also be the topic of the upcoming Lightweight TechTalk by AZL on September 29, 2020. Experts from industry and academia will give technology and market insights on sustainability and recycling of composites in 6 presentations. Registration is free of charge at: https://azl-aachen-gmbh.de/termine/recycling-of-composites/.

The kick-off of the project will take place on October 22nd, 2020 in the form of a video conference. Further background information on the project can be found under the following link: https://azl-aachen-gmbh.de/wp-content/uploads/2020/09/2020-251_OP_Bio-Bases_Composites.pdf

130 Million Liters of Water Saved in One Year (c) Huntsman Corporation
ERIOPON® E3-SAVE saves time, water, energy and cost
23.09.2020

130 Million Liters of Water Saved in One Year

Singapore – As global interest in sustainable textile production continues to soar, mills that have adopted Huntsman Textile Effects’ all-in-one ERIOPON® E3-SAVE textile auxiliary for polyester processing, which launched one year ago, have collectively saved more than 130 million liters of water.

Demand for polyester fabric is being driven by seemingly insatiable consumer appetite for sportswear and athleisure clothing. Sales in the sector have been on an upward trend for several years and are even proving resilient amid Covid-19 market disruption. However, dyeing of polyester and its blends has traditionally been resource intensive, time consuming and costly.

Huntsman Textile Effects’ next-generation ERIOPON® E3-SAVE textile auxiliary was engineered to address these challenges. It eliminates the need for separate pre-scouring, allowing pre-scouring, dyeing and reduction clearing to be combined in a single bath. Mills that use ERIOPON® E3-SAVE can thus dramatically shorten the polyester dyeing process and save water, energy and cost.

Singapore – As global interest in sustainable textile production continues to soar, mills that have adopted Huntsman Textile Effects’ all-in-one ERIOPON® E3-SAVE textile auxiliary for polyester processing, which launched one year ago, have collectively saved more than 130 million liters of water.

Demand for polyester fabric is being driven by seemingly insatiable consumer appetite for sportswear and athleisure clothing. Sales in the sector have been on an upward trend for several years and are even proving resilient amid Covid-19 market disruption. However, dyeing of polyester and its blends has traditionally been resource intensive, time consuming and costly.

Huntsman Textile Effects’ next-generation ERIOPON® E3-SAVE textile auxiliary was engineered to address these challenges. It eliminates the need for separate pre-scouring, allowing pre-scouring, dyeing and reduction clearing to be combined in a single bath. Mills that use ERIOPON® E3-SAVE can thus dramatically shorten the polyester dyeing process and save water, energy and cost.

“Our innovations aim to help mills improve their productivity and competitiveness while also contributing to the textile industry’s shift to more sustainable practices and a reduced environmental footprint,” said Kerim Oner, Global Marketing Manager, Huntsman Textile Effects. “With ERIOPON® E3-SAVE, we have harnessed the unparalleled technical expertise and application know-how of our research and field teams to develop a product that is proven to reduce costs for mills and that meets current and anticipated industry sustainability standards.”

Dae Young Textile Vietnam Co., Ltd, a forerunner in sustainable textile production in Asia, was an early adopter of the ERIOPON® technology. Results from bulk production show that ERIOPON® E3-SAVE has reduced process time by over 20 percent and water consumption by over 50 percent, delivering annual cost savings of up to 30 percent.

“ERIOPON® E3-SAVE delivers a combination of best-in-class performance and value. It allows us to have the shortest possible processing cycle, which is key for us to deal with increasing industry pressure for faster turnarounds,” Jeong Won Oh, General Manager, Dae Young Textile Vietnam, said. “Alongside dramatic time savings, we are also saving water, energy and ultimately cost. Huntsman’s best-in-class products and high level of technical support help keep businesses like us productive.”

This unique polymer technology of ERIOPON® E3-SAVE promotes controlled exhaustion to ensure right-first-time level dyeing. It extracts oil and oil-based impurities from the fiber during processing and displays a high affinity to disperse dyes, enabling the rapid removal of unfixed surface dyes from the fiber during reduction clearing. The technology also enhances reproducibility and improves wet- and rub-fastness.

ERIOPON® E3-SAVE saves time, water, energy and cost in polyester dyeing by combining pre-scouring, dyeing and reduction clearing in a single bath. An advanced multi-action dyeing auxiliary in the dyEvolutionTM range, it delivers environmental and economic sustainability.

Source:

Huntsman Corporation

(c) Kelheim Fibres GmbH
23.09.2020

Kelheim Fibres nominated for the Sustainbability Heroes Award

Kelheim Fibres has been selected as a finalist for the Sustainability Heroes Award in the category “Sustainable Innovation”. The award is presented by DQS (German Association for Sustainability) and DGQ (German Association for Quality) to pioneers in sustainability and aims to further encourage active involvement in this field.
 
The viscose speciality fibres manufacturer has secured the selection with its innovative plant-based fibres that can substantially contribute to a plastic-free future in absorbent hygiene products such as femcare or incontinence products.

In contrast to other plant-based fibres, viscose fibres can be precisely modified and functionalised during the production process. They can be adapted to meet the exact requirements of the single components of a hygiene product in terms of their liquid management properties (from water repellent to highly absorbent) and so match the performance of synthetic fibres that are still used in the majority of these single-use products.

Kelheim Fibres has been selected as a finalist for the Sustainability Heroes Award in the category “Sustainable Innovation”. The award is presented by DQS (German Association for Sustainability) and DGQ (German Association for Quality) to pioneers in sustainability and aims to further encourage active involvement in this field.
 
The viscose speciality fibres manufacturer has secured the selection with its innovative plant-based fibres that can substantially contribute to a plastic-free future in absorbent hygiene products such as femcare or incontinence products.

In contrast to other plant-based fibres, viscose fibres can be precisely modified and functionalised during the production process. They can be adapted to meet the exact requirements of the single components of a hygiene product in terms of their liquid management properties (from water repellent to highly absorbent) and so match the performance of synthetic fibres that are still used in the majority of these single-use products.

Whereas today, environmentally conscious consumers must often decide between feeling safe and a clear conscience, the Bavarian fibre experts are actively developing more and more products that do justice to both: Kelheim combines sustainably manufactured and completely biodegradable fibres with the technical performance of synthetic fibres. The aim is to help to reduce the use of crude-oil-based plastics in single-use products and their negative impact on the environment.

Source:

Kelheim Fibres GmbH

Baldwin installs six precision spray systems in 60 days for textile manufacturers (c) Baldwin Technology Company Inc.
Baldwin’s TexCoat G4 precision spray system produces ideal results in fabric finishing, because the exact required amount of water and chemistry is always applied.
22.09.2020

Baldwin: six precision spray systems in 60 days for textile manufacturers

  • Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

  • Fabric finishing and sanforization systems installed in the US and Turkey to enhance productivity

ST. LOUIS - Baldwin Technology Company Inc. has successfully installed six new fabric finishing and sanforizing precision spray systems in the US and Turkey. Despite the COVID-19 pandemic, the installations were completed in just 60 days, thanks to close collaboration between onsite Baldwin textile team members, local agents and remote support from the company’s product and technology center in Sweden.
For textiles, non-wovens and technical textiles, Baldwin’s precision spray technology processes a wide range of low-viscosity water-based chemicals, such as softeners, anti-microbial agents, water repellents, oil  repellents, flame retardants and more.

These systems enable fabric producers to significantly reduce chemical and water consumption, while speeding up production times and eliminating production steps, including drying and bath changeovers when switching fabric colors. “Our customers are major manufacturers in fabric dying, finishing and remoistening, and we want to provide outstanding service and support—even in times like this,” said Rick Stanford, Business Development Leader at Baldwin and the commercial leader of the US installations. “Not only does our precision spray technology enhance productivity in their process, but there is also zero waste, which goes hand-in-hand with the increased sustainability focus in the textile industry.”

In North Carolina, two new TexCoat G4 precision spray systems are now in production with major international vertical manufacturers of outdoor living, performance fabrics and automotive fabrics. In Georgia, a major vertical manufacturer of workwear and protective fabrics installed a sanfor precision spray system, which has helped the customer obtain deeper penetration of moisture into fabrics treated with durable water repellents. In Turkey, three new TexCoat G4 systems were installed in Çorlu, northwest of Istanbul, for a large producer of knit fabrics, such as T-shirts. “In Turkey, the manufacturer purchased and installed one TexCoat G4 system before COVID-19, and the customer was so pleased with the results that, during the pandemic, three more were purchased,” said Simone Morellini, Sales Manager- EMEAR at Baldwin and the commercial leader of the Turkish installations. “The systems were manufactured and installed during the lockdown, and now, all four systems are up and running, and being used heavily on a daily basis.” “With the success we have seen, we plan to apply the same strategies for upcoming installations, including the next one in Honduras: strong local management and customer coordination, combined with  effective remote support during the installation,” said Stanford.

Source:

Baldwin Technology Company Inc.

21.09.2020

Lenzing Group further improves sustainability rating

The Lenzing Group was raised to “B-” by the sustainability rating agency ISS ESG and awarded “Prime Status”.  

In its latest report, ISS ESG, one of the most recognized rating agencies in the field of sustainability, raised the Lenzing Group’s sustainability rating from “C+” to “B-”, the highest rating in the category “Paper & Forest Products“, positioning the Lenzing Group among the top 10 percent of rated companies. The “Prime Status” of the Lenzing Group has also been confirmed.

ISS ESG is one of the leading agencies for sustainability ratings internationally and currently covers more than 8,000 issuers worldwide. The assessment of sustainability performance is based on more than 800 individual indicators in the areas of environmental, social and governance (so-called ESG criteria) performance. 40 companies from all over the world are rated in the “Paper & Forest Products” category. The best rating in this category is “B-“.

The Lenzing Group was raised to “B-” by the sustainability rating agency ISS ESG and awarded “Prime Status”.  

In its latest report, ISS ESG, one of the most recognized rating agencies in the field of sustainability, raised the Lenzing Group’s sustainability rating from “C+” to “B-”, the highest rating in the category “Paper & Forest Products“, positioning the Lenzing Group among the top 10 percent of rated companies. The “Prime Status” of the Lenzing Group has also been confirmed.

ISS ESG is one of the leading agencies for sustainability ratings internationally and currently covers more than 8,000 issuers worldwide. The assessment of sustainability performance is based on more than 800 individual indicators in the areas of environmental, social and governance (so-called ESG criteria) performance. 40 companies from all over the world are rated in the “Paper & Forest Products” category. The best rating in this category is “B-“.


 An essential part of the Lenzing Group’s strategy are its ambitious climate goals. In 2019, Lenzing was the first fiber manufacturer in the world to make a strategic commitment to climate-neutral production. This vision is to be put into practice by 2050. By 2030, the company is aiming for the interim goal of reducing emissions by 50 percent per ton of product compared to 2017.

The Science Based Targets Initiative, an organization in the field of climate-relevant target setting, has scientifically confirmed the climate targets of the Lenzing

More information:
Lenzing Group
Source:

Lenzing AG

Sappi 1 (c) Sappi Europe
18.09.2020

Sappi - Platinum for sustainability

Sappi Europe received a platinum score in the latest EcoVadis rating. On of the leading global providers of sustainable woodfibre products and solutions retained its top position from the previous year among the leading one per cent of all companies assessed which exhibit high activity and responsibility with regard to corporate social responsibility (CSR).

  • Sappi Europe receives top rating for sustainability
  • Unlocking the power of renewable resources to benefit people, communities and the planet

As part of its clear strategic goals in relation to sustainability and environmental protection, Sappi reached a new milestone. A market leader in environmentally friendly packaging and graphic papers received a platinum score in this year’s sustainability rating from EcoVadis, establishing itself as one of the top performers, with a score well above the overall average. The EcoVadis rating covers a total of 21 criteria, which in turn are divided into four general areas: environment, labour and human rights, ethics and sustainable procurement.

Sappi Europe received a platinum score in the latest EcoVadis rating. On of the leading global providers of sustainable woodfibre products and solutions retained its top position from the previous year among the leading one per cent of all companies assessed which exhibit high activity and responsibility with regard to corporate social responsibility (CSR).

  • Sappi Europe receives top rating for sustainability
  • Unlocking the power of renewable resources to benefit people, communities and the planet

As part of its clear strategic goals in relation to sustainability and environmental protection, Sappi reached a new milestone. A market leader in environmentally friendly packaging and graphic papers received a platinum score in this year’s sustainability rating from EcoVadis, establishing itself as one of the top performers, with a score well above the overall average. The EcoVadis rating covers a total of 21 criteria, which in turn are divided into four general areas: environment, labour and human rights, ethics and sustainable procurement.

Encouraging sustainable operations across the entire value chain have been a key part of Sappi’s corporate strategy for many years. Sappi’s entire business model and investments in research and development are based on the use of renewable materials. The environment management approach of the global company includes a variety of strategies designed to improve its ecological footprint. For 2025, Sappi has linked its sustainability targets to the United Nations’ Sustainable Development Goals. Sappi has long held principles based around People, Planet and Prosperity and with  a heightened focus on seven of the SDG’s they believe they can deliver  real impact and contribute to the global sustainable development agenda.

The platinum rating from EcoVadis demonstrates that Sappi not only talks about sustainability, but actively works towards ensuring it in a very practical way. The whole world is talking about sustainable solutions and looking for alternatives to fossil fuels. Sappi is focused on providing product solutions to the market. A few weeks ago, the market leader presented a number of solutions relating to functional paper packaging as part of its ‘Pro Planet Paper Packaging’ campaign to enable sustainable, high-quality packaging for food and non-food products.

Sappi Europe is extremely proud to have obtained the EcoVadis Platinum rating and while certification and recognition go a long way to helping our work we also acknowledge at Sappi Europe that we are part of a global community that need to continue to strive in all our business areas to create the change needed to help our customers become truly sustainable. The recyclable nature of products derived from woodfibre are essential to creating a more circular economy, where the world’s resources are kept in use longer and more creatively. By responsibly sourcing materials, reducing material waste and emissions , carefully considering product end-of-life, and aiming to use the full potential of trees, we actively promote more sustainable systems explains Sarah Price, Sappi Europe’s Sustainability Manager

 

More information:
Sappi Europe Sustainability
Source:

Sappi Europe

Devan lauded by Frost & Sullivan for its antimicrobial technology with proven quaternized silane chemistry (c) Devan Chemicals NV
16.09.2020

Devan lauded by Frost & Sullivan

Belgian textile innovator Devan Chemicals was lauded by Frost & Sullivan for its antimicrobial technology with proven quaternized silane chemistry, known under its trade name as BI-OME®.

RONSE, BELGIUM – The non-leaching attributes of the technology coupled with its ability to reduce microbial mutation make it a potential candidate for textiles where durability and safe human contact are highly valued.

Belgian textile innovator Devan Chemicals was lauded by Frost & Sullivan for its antimicrobial technology with proven quaternized silane chemistry, known under its trade name as BI-OME®.

RONSE, BELGIUM – The non-leaching attributes of the technology coupled with its ability to reduce microbial mutation make it a potential candidate for textiles where durability and safe human contact are highly valued.

Based on its recent analysis of the European antimicrobial technology for the textile market, Frost & Sullivan recognizes the Belgium-headquartered Devan Chemicals NV (Devan) with the 2020 European Technology Innovation Leadership Award. Devan’s highly relevant antimicrobial technology addresses issues concerning the contamination of PPE and textiles, including the spread of drug-resistant bacteria, viral transmissions, and hospital-acquired infections (HAIs). Its quat-silane technology, due to its non-migrating behaviour, physically punctures the microorganism cell to destroy it without interfering with cell DNA. Notably, it eliminates the adverse effects of leaching antimicrobials while providing high efficiency in the range of 99.9 percent to 99.99 percent, even after multiple washes.

"By providing non-migrating antimicrobial technology for the textile industry, Devan plugs the safety and performance gaps inherent in current inorganic and organic antimicrobial agents. Its antimicrobial technology, unlike silver- or triclosan-based technology, comprises non-migrating monomers and prepolymers such as organo-functional silane," said Monami Dey, Industry Manager, Frost & Sullivan. "The organo-silane polymers are covalently bonded and polymerized to the textile surface as a coating via padding, exhaust, and spraying techniques. The coating forms a non-leaching reactive surface and destroys the microbes on contact, without releasing harmful components into the environment."

Devan CEO Sven Ghyselinck is very happy with the award: “The best practice award is a nice recognition of the hard work we did in the last 6 months to evaluate the performance against viral activity. It’s great to see our efforts didn’t go unnoticed.”

Earlier this month Devan published new test results confirming the high performance virus-reducing capabilities of its BI-OME fabric coating technology on both unwashed and intensely washed fabrics. The Belgian company has worked closely with a series of international third party laboratories to test different fabric substrates against a wide range of enveloped viruses. Before washing, samples treated with Devan BI-OME score very good to excellent (99% and higher according to ISO 18184) results on virus reduction. Different substrates, like polyester, cotton and polycottons, were exposed to enveloped viruses like SARS-COV-2 (known to cause COVID-19), Feline Corona, Vaccinia (the EU standard for enveloped viruses) and Porcine Respiratory viruses. After 30minutes, BI-OME already reduced 99.96% of the activity of SARS-COV-2.

After washing, a decrease in virus reduction performance of coating technologies is normal and expected. However, BI-OME is confirmed to deliver only a minimal reduction, retaining up to 98.5% virus reduction even when the fabric is washed 25 times.

"Devan is working towards sustainability and green chemistry. For instance, its technology does not contain any harmful solvents such as formaldehyde or polychlorinated phenols and fulfills the regulatory obligations of the EU BPR," noted Dey. "Its commitment to promoting sustainability in textile finishes with a strong focus on GMO-free, kosher, as well as halal certifications, and recyclability has given the company an edge in launching new products at an accelerated pace to match customers’ most pressing concerns and demands."

One of those innovations is BI-OME NTL (natural), a natural, bio-based antimicrobial solution that guarantees an optimal freshness and hygiene for textiles. The active ingredient is the well-known Linseed oil, obtained from the dried, ripened seeds of the flax plant. The active ingredients in BI-OME NTL are GMO free, Halal, Kosher and recyclable.

Collaboration Between DuPont™ Sorona® and Sateri’s EcoCosy® Results in Innovative Fabrics for Fashion and Athleisure (c) Sateri
StretchCosy
10.09.2020

Innovative Fabrics for Fashion and Athleisure

  • Collaboration Between DuPont™ Sorona® and Sateri’s EcoCosy®

DuPont™ Sorona® and Sateri’s EcoCosy® have together developed a new fabric called StretchCosy™. The fabric uses a blend of Sorona®, a partially plant-based fibre, and Sateri’s ultra-comfortable and near weightless EcoCosy® fibres to achieve a soft material that is highly stretchable, shape-retaining and, most importantly, sustainably sourced.

StretchCosy™ combines the mechanical stretch of Sorona® stretch fibres, which gives it excellent stretch and long-lasting, consistent recovery, with the soft, cotton-like breathability and smooth silk-like texture of EcoCosy® for an unparalleled fabric that is high-performing and well-suited for fashion and sportswear.

  • Collaboration Between DuPont™ Sorona® and Sateri’s EcoCosy®

DuPont™ Sorona® and Sateri’s EcoCosy® have together developed a new fabric called StretchCosy™. The fabric uses a blend of Sorona®, a partially plant-based fibre, and Sateri’s ultra-comfortable and near weightless EcoCosy® fibres to achieve a soft material that is highly stretchable, shape-retaining and, most importantly, sustainably sourced.

StretchCosy™ combines the mechanical stretch of Sorona® stretch fibres, which gives it excellent stretch and long-lasting, consistent recovery, with the soft, cotton-like breathability and smooth silk-like texture of EcoCosy® for an unparalleled fabric that is high-performing and well-suited for fashion and sportswear.

Created in 2019, StretchCosy™ is a fabric breakthrough that made it possible for natural plant-based fibres to be more extensively used in various applications, e.g. t-shirts, shirting, bottoms, jackets, dresses, hoodies and underwear. Previously, cellulosic fibres were rarely found in sportswear, due to concerns such as pilling. The combination of Sorona® and EcoCosy® in StretchCosy™ has eliminated this concern, hinting at the future of activewear where performance combined with sustainability will be the norm.

Source:

Omnicom Public Relations Group

Color Atlas 1 (c) Shima Seiki
10.09.2020

Shima Seiki selects Archroma’s ‘Color Atlas’ library system for their new design software

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that the 4,320 color references of its Color Atlas library have been selected by Shima Seiki and integrated into their ‘SDS-ONE APEX’ series of software for the design, planning and virtual sampling of textile and apparel.

Shima Seiki is a leading provider of digitally optimized solutions for the fashion industry, who combines its on-demand ‘WHOLEGARMENT’ knitting machine with realistic virtual sampling. Based on actual yarn data, fabric simulations generated on the SDS-ONE APEX-series are unparalleled in quality and realism. Design and simulation are available for knits and various other textile applications, and smooth transition to machine programming is possible for quick and accurate design-to-manufacture interface.

That is where the Color Atlas by Archroma® will considerably benefit to the users of Shima Seiki’s solutions.

The Color Atlas was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Archroma, a global leader in color and specialty chemicals towards sustainable solutions, today announced that the 4,320 color references of its Color Atlas library have been selected by Shima Seiki and integrated into their ‘SDS-ONE APEX’ series of software for the design, planning and virtual sampling of textile and apparel.

Shima Seiki is a leading provider of digitally optimized solutions for the fashion industry, who combines its on-demand ‘WHOLEGARMENT’ knitting machine with realistic virtual sampling. Based on actual yarn data, fabric simulations generated on the SDS-ONE APEX-series are unparalleled in quality and realism. Design and simulation are available for knits and various other textile applications, and smooth transition to machine programming is possible for quick and accurate design-to-manufacture interface.

That is where the Color Atlas by Archroma® will considerably benefit to the users of Shima Seiki’s solutions.

The Color Atlas was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

The Color Atlas continues to evolve in line with Archroma’s commitment to sustainability through innovation. The company describes it as “The Archroma Way to a sustainable world: safe, efficient, enhanced, it’s our nature”. All color references available in the Color Atlas have been formulated with products that comply with leading international eco-standards, and can be selected based on the desired sustainability profile.

Today, the Color Atlas contains 4,320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists. Technical support is available to designer, manufacturers, as well as brands and retailers, through Archroma’s global offices - for every single color from its selection to its implementation in production. Engineered color standards empowered by NFC technology are also available for all colors and reproducible in production.

With this new collaboration, the users of the SDS-ONE APEX design software of Shima Seiki will have at their disposal 4320 colors that they can visualize, evaluate and implement, in a considerably accelerated process from the first creative idea to the production to the final outlet, whether online or in brick-and-mortar shops.

“Accurate color evaluation and communication are very important issues for design work”, explains Hideya Ohtani, General Manager, Graphic System Development Division, at Shima Seiki. “We have high expectations for Archroma's Color Atlas to help our APEX series users develop their products in an even more smooth and accurate manner.“

“We are proud to bring our Color Atlas library to the users of Shima Seiki’s extremely advanced design software,” says Chris Hipps, Head of Co lor Management Services, at the Archroma Brand Studio. “Designers and users of the software will have at their disposal not only color options they never had before but also colors that they can trust will be implementable right away. That’s what we strive to do at Archroma: create a new way of working: safe, efficient and enhanced. It’s our nature!”

More information:
Shima Seiki Archroma Design Software
Source:

Archroma / EMG

Milano Unica: Iluna Group presents the FW 21-22 collection (c) Iluna Group
Green Label and BIOLINE laces
08.09.2020

Milano Unica: Iluna Group presents the FW 21-22 collection

  • Trust the vibes, energy doesn’t lie!

Advanced design and sustainability, innovation, aesthetics and quality, made of “ethical” laces and tights of very high quality standards and a careful look at fashion. Iluna Group, strengthened by this heritage, with a smart approach, carefully selected materials, know-how on processes and particular attention to the ecosystem, is a leader in its sector

With the FW 21-22 collection, Iluna Group focuses on design excellence aimed at perfection driven by this particular historical moment, in which preferring quality over quantity has become necessary: offering ever higher standards of quality is combined with the choice of reducing minimum waste in a way of working that becomes more thoughtful, studied, focused and less hectic.

  • Trust the vibes, energy doesn’t lie!

Advanced design and sustainability, innovation, aesthetics and quality, made of “ethical” laces and tights of very high quality standards and a careful look at fashion. Iluna Group, strengthened by this heritage, with a smart approach, carefully selected materials, know-how on processes and particular attention to the ecosystem, is a leader in its sector

With the FW 21-22 collection, Iluna Group focuses on design excellence aimed at perfection driven by this particular historical moment, in which preferring quality over quantity has become necessary: offering ever higher standards of quality is combined with the choice of reducing minimum waste in a way of working that becomes more thoughtful, studied, focused and less hectic.

The range of sustainable products expands by adding to the GRS certified Green Label, the BIOLINE, made with raw materials such as the precious ROICA™ V550 premium stretch fiber which belongs to ROICA Eco-Smart ™ family produced by Asahi Kasei able to combine elasticity and comfort and other benefits in terms of circular economy related to the health of materials, as demonstrated by the Gold Level Material Health Certificate by the Cradle to Cradle Product Innovation Institute, and by the world's first biodegradable polyamide 6.6 yarn AMNI SOUL ECO®, fibers that degrade completely in the environment under anaerobic conditions.

The exceptional natural dyes proposed are made with vegetable dyes extracted from various plants, with a color chart that now has 14 shades, all with solidity within the OEKO TEX® Standard 100 and all GOTS certified. No chemical product is used for the dyes, including the softening finish, for which an equally natural product is used.

All the products of the Iluna Group collections can be made in a recycled or organic variant.

Iluna Group participates to Milano Unica and digitally at all sector fairs, a new way of communicating that together with the use of social media - accompanied by the launch last year of the official website and e-commerce with all the collections and the ilunamasks.com site dedicated to the sale of the exclusive Iluna masks - it can be transformed from a necessity to a great resource and an opportunity to enhance a 360° sustainable attitude. Iluna, even before the pandemic, has always considered the sustainable aspect a priority in its work and now, in the light of this new landscape, the many years of experience gained benefits the company by pushing it to place itself more and more as a precursor of sustainable innovation.

The constant commitment to responsible solutions makes Iluna Group the only lace manufacturer to use - since 2017 - transformed stretch in the entire range of its elastic laces. Iluna Group excellence is based 100% on responsible innovation, guaranteed by the most important certifications. The creation of smart lace, strictly Made in Italy, is also Global Recycled Standard (GRS) certified. Today Iluna is a reference point for international markets and boasts products with OEKO-TEX® Standard 100 certification.

Source:

GB Network Marketing & Communication

Amazing Connections: SFASHION NET & C.L.A.S.S. © GB Network Marketing & Communication
Marina Savarese, SFASHION NET founder
31.08.2020

Amazing Connections: SFASHION NET & C.L.A.S.S.

  • A new partnership is born in the name of responsible innovation, relationships and a new twist in the fashion system

C.L.A.S.S., the international hub for responsible innovation founded by Giusy Bettoni, and SFASHION NET, the portal dedicated to micro critical fashion companies created by Guya Manzoni and Marina Savarese, join forces to give active support to micro enterprises and bring a wave of fresh air in the fashion system.

When you speak the same language and are moved by the same values, it is easy to meet on a common path. You can decide to walk alone, or to continue together in the same direction. This is what has happened since the meeting of C.L.A.S.S. and SFASHION NET, two realities, the first consolidated over time and the second recently born, which speak of responsible innovation, beauty, design, tradition, ethics and smart communication.

And who have decided to combine skills and ideas in the name of a revolutionary vision of fashion.

  • A new partnership is born in the name of responsible innovation, relationships and a new twist in the fashion system

C.L.A.S.S., the international hub for responsible innovation founded by Giusy Bettoni, and SFASHION NET, the portal dedicated to micro critical fashion companies created by Guya Manzoni and Marina Savarese, join forces to give active support to micro enterprises and bring a wave of fresh air in the fashion system.

When you speak the same language and are moved by the same values, it is easy to meet on a common path. You can decide to walk alone, or to continue together in the same direction. This is what has happened since the meeting of C.L.A.S.S. and SFASHION NET, two realities, the first consolidated over time and the second recently born, which speak of responsible innovation, beauty, design, tradition, ethics and smart communication.

And who have decided to combine skills and ideas in the name of a revolutionary vision of fashion.

Micro companies and independent designers, the daily bread of SFASHION NET, will become the final addressees of a series of specialized services and courses developed by C.L.A.S.S. and will benefit from special conditions for finding materials in small quantities available on the Smart Source and ad hoc consultancy. All this to support the growth of these brands that have always moved on the wave of sustainability and ethical production, but often encountering many problems.

Online activities will alternate with offline meetings, because relationship is what makes the difference, even in the world of fashion.

“The spirit and values of the new generation of designers are what makes us optimistic about tomorrow’s fashion system. For this reason, together with SFASHION NET “every year” we will choose 1 or 2 creatives that are more in line with our common values and we will promote them at 360°, on all our channels and with a targeted communication activity starting from the collections that will be presented in February”.

14.08.2020

Two More Sateri Mills Confirmed EU-BAT Compliant

  • World’s largest viscose producer well on track for all of its five mills to be EU-BAT compliant by 2023

Two more Sateri mills in China, Sateri Jiujiang and Sateri Jiangxi, have received verification of compliance to the emissions limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) on Polymers. This brings the total number of EU-BAT compliant mills to three of five, accounting for over 60 per cent of Sateri’s overall fibre production capacity. In April this year, Sateri Fujian was the company’s first mill to be verified as being EU-BAT compliant. Verified by independent consultant Sustainable Textile Solutions (STS), a division of BluWin Limited (UK), the parameters of the EU-BAT BREF assessed included resource utility efficiency, wastewater discharge and air emission. As a highlight, STS’ assessment concluded that the energy intensity and air emission of Sateri Jiujiang and Sateri Jiangxi were well under EU-BAT norms for viscose production. Considering the EU-BAT energy requirements limit of 30GJ/MTf, the mills were each saving about 1,100 kg CO2/MT of fibre production.

  • World’s largest viscose producer well on track for all of its five mills to be EU-BAT compliant by 2023

Two more Sateri mills in China, Sateri Jiujiang and Sateri Jiangxi, have received verification of compliance to the emissions limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) on Polymers. This brings the total number of EU-BAT compliant mills to three of five, accounting for over 60 per cent of Sateri’s overall fibre production capacity. In April this year, Sateri Fujian was the company’s first mill to be verified as being EU-BAT compliant. Verified by independent consultant Sustainable Textile Solutions (STS), a division of BluWin Limited (UK), the parameters of the EU-BAT BREF assessed included resource utility efficiency, wastewater discharge and air emission. As a highlight, STS’ assessment concluded that the energy intensity and air emission of Sateri Jiujiang and Sateri Jiangxi were well under EU-BAT norms for viscose production. Considering the EU-BAT energy requirements limit of 30GJ/MTf, the mills were each saving about 1,100 kg CO2/MT of fibre production.

The mills also followed local requirements for controlling ecological impact for viscose production, and there were no gaps identified against EU-BAT. Sateri Jiangxi is a 16-year-old mill and the company’s first and oldest, while Sateri Jiujiang was acquired and expanded in 2015. Said Allen Zhang, President of Sateri, “For three of our five mills to meet the EU-BAT emissions limits in such a short span of time is a testament to our continued investment in best-in-class technologies. This applies to all our mills – regardless of whether they are existing, acquired, or newly constructed ones – as we aim to achieve a high level of sustainability performance across all our operations.”

The company is well on track for its remaining two mills, Sateri Jiangsu and Sateri China which were acquired and newly-built in 2019 respectively, to comply with EU-BAT’s recommended emission levels by 2023.

Source:

Omnicom Public Relations Group

ECOSENSOR™ by Asahi Kasei launches its new fabric collection imbued with the brand’s sustainable story-making © GB Network
ECOSENSOR™ 100% recycled polyamide fabrics
06.08.2020

ECOSENSOR™ by Asahi Kasei launches its new fabric collection imbued with the brand’s sustainable story-making

  • ECOSENSOR™’s new references combine high-performance and innovation to empower people with the possibility to live life naturally both for mind and body.
  • The new range is woven from certified ingredients, a completely traceable production process and highly certified suppliers               

"A New Eco high-tech force of Nature", a bold claim, a daring attitude and true facts. ECOSENSOR™ by Asahi Kasei has concentrated all its key values into a Nature-driven and high-tech fabric collection that respects the environment and human being.

Sustainability, active climate control, exquisite touch and extreme performance co-habit the textiles: the collection is made of wovens and knits where the main technology is represented by GRS - Global Recycle Standard certified polyamide and polyesters, sometime combined with ROICA™ recycled stretch yarns and dyed and finished with Oekotex Standard 100 certified processes and/or by BlueSign® partners’ companies.

But there is much more than it meets the eye.

Behind the new collection is a great story of sustainability.

  • ECOSENSOR™’s new references combine high-performance and innovation to empower people with the possibility to live life naturally both for mind and body.
  • The new range is woven from certified ingredients, a completely traceable production process and highly certified suppliers               

"A New Eco high-tech force of Nature", a bold claim, a daring attitude and true facts. ECOSENSOR™ by Asahi Kasei has concentrated all its key values into a Nature-driven and high-tech fabric collection that respects the environment and human being.

Sustainability, active climate control, exquisite touch and extreme performance co-habit the textiles: the collection is made of wovens and knits where the main technology is represented by GRS - Global Recycle Standard certified polyamide and polyesters, sometime combined with ROICA™ recycled stretch yarns and dyed and finished with Oekotex Standard 100 certified processes and/or by BlueSign® partners’ companies.

But there is much more than it meets the eye.

Behind the new collection is a great story of sustainability.

"Our international team strives to innovate with a human-based approach to research and develop solutions that meet high-performance standards as well as the transparency and traceability of both the ingredients and the supply chain", says Mr. Hashimoto, Senior Managing Director of Asahi Kasei Advance, the global materials innovator and manufacturer.

Indeed, the company has set the high bar all its suppliers and partners must match. Such criteria include: thoroughly transparency and traceability of both materials and production, corporate responsibility at all levels and a strategic commitment granted by influential certifications such as GRS - Global Recycle Standard for recycled ingredients and processes, as well as Bluesign® and OekoTex Standard 100 certifications, which focus on environmentally-friendly impact of the dyeing and finishing processes.

The human, environmentally-friendly and cutting-edge imprint of ECOSENSOR™ ultimate collection reflects a vision for a more responsible way of fabric manufacturing.

A new force of nature, because story telling truly must match the story making.

Italian creativity merges with Chinese technological innovation to create a new capsule collection ADVANCE DENIM BY PAOLO GNUTTI (c) ADVANCE DENIM
31.07.2020

Advance Denim by Paolo Gnutti

  • Italian creativity merges with Chinese technological innovation to create a new capsule collection
     

A new era is born in the world of denim, Paolo Gnutti and Advance Denim will combine their skills to create capsule collections for both the US and Asian markets.

These collections will combine Paolo Gnutti’s artistry and Advance denim’s technological innovation to create “magical” inspiration that is with the reach of all brands.

Advance Denim has the distinction of being the oldest denim manufacturer in China and has dedicated its efforts since day one around the core beliefs of innovation , service , quality and people. These core beliefs are the foundation of their day to day focus of becoming a world leader in denim. They are also  committed to making the most sustainable denim possible and they are constantly investing in the infrastructure and systems that will help them to reach aggressive sustainability goals . Sustainability is important but Advance Denim has always been true to denim and strive to produce innovative high-quality products that exceed the needs of the market

  • Italian creativity merges with Chinese technological innovation to create a new capsule collection
     

A new era is born in the world of denim, Paolo Gnutti and Advance Denim will combine their skills to create capsule collections for both the US and Asian markets.

These collections will combine Paolo Gnutti’s artistry and Advance denim’s technological innovation to create “magical” inspiration that is with the reach of all brands.

Advance Denim has the distinction of being the oldest denim manufacturer in China and has dedicated its efforts since day one around the core beliefs of innovation , service , quality and people. These core beliefs are the foundation of their day to day focus of becoming a world leader in denim. They are also  committed to making the most sustainable denim possible and they are constantly investing in the infrastructure and systems that will help them to reach aggressive sustainability goals . Sustainability is important but Advance Denim has always been true to denim and strive to produce innovative high-quality products that exceed the needs of the market

“We are looking forward to Paolo bringing his Italian artistic aesthetics to our denim.” Said Ms. Amy Wang, General Manager of ADVANCE DENIM. “ We believe it is the combination of eastern and western design and culture that have never been offered to our customers before and will take Advance Denim to a whole new level. It is our goal to also offer these high quality designs at a competitive price from our Vietnam facility.” conclude Ms. Wang.

Paolo Gnutti, a life time dedicated to denim innovation and creativity, bases the creation of his collections following  precise themes and  stylistic contaminations. He uses indigo bases which are completely transformed thanks to the use of flocks, 3D prints, colored foils and metallic effects.

Paolo Gnutti has the ability to conceive ground breaking fashion, thanks to his incredible creativity and visionary irreverent combination that ushers in a new concept of  fashionability to the denim world.

“ My passion and my professional exploration lead me to acquire the skill needed to develop unforgettable and unique textile concepts” said Paolo Gnutti “ I’m trilled to begin this collaboration with Advance Denim. I feel that we need a new challenge in our denim world, a new era of true globalization; we will create a capsule collection that will reach all customers, from premium to the mass market.”

A new era begins, based on the evolution of the  market and the search for innovation and inspiration that is both technically performance driven and accessible to all brands.

More information:
ADVANCE DENIM Paolo Gnutti Denim
Source:

EFFE-BI SRL PR & COMMUNICATION

Sustainable leadership for GtA with new Monforts Montex wide width lines (c) AWOL Media
GtA Managing Director Andreas Niess
27.07.2020

Sustainable leadership for GtA with new Monforts Montex wide width lines

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Source:

AWOL Media for A. Monforts Textilmaschinen GmbH & Co. KG

20.07.2020

Lenzing once again gold status in the sustainability rating of EcoVadis

For the third time in a row, the Lenzing Group was awarded gold status in the EcoVadis CSR rating. The assessment is further evidence that the company is one of the top performers in the field of sustainability worldwide.

Lenzing is thus one of the leading two percent of all assessed companies in its industry.
The assessment covers the four most important CSR (Corporate Social Responsibility) practices:

  • environment
  • fair working conditions and human rights
  • ethics and sustainable procurement

“This award makes us very proud and encourages us to continue on our path to becoming a provider of environmentally friendly specialty fibers. At Lenzing, we look beyond fibers and take responsibility for our children and grandchildren by
standing up resolutely against the shortcomings of our time. This attitude is part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and society”, says Stefan Doboczky, CEO of the Lenzing Group.

For the third time in a row, the Lenzing Group was awarded gold status in the EcoVadis CSR rating. The assessment is further evidence that the company is one of the top performers in the field of sustainability worldwide.

Lenzing is thus one of the leading two percent of all assessed companies in its industry.
The assessment covers the four most important CSR (Corporate Social Responsibility) practices:

  • environment
  • fair working conditions and human rights
  • ethics and sustainable procurement

“This award makes us very proud and encourages us to continue on our path to becoming a provider of environmentally friendly specialty fibers. At Lenzing, we look beyond fibers and take responsibility for our children and grandchildren by
standing up resolutely against the shortcomings of our time. This attitude is part of our strategic principles and we will continue to work hard to make a sustainable contribution to the environment and society”, says Stefan Doboczky, CEO of the Lenzing Group.

Lenzing’s ambitious climate target represents an important component of the company’s strategy and the responsibility towards future generations. In the 2019 financial year, Lenzing became the world’s first producer of wood-based cellulosic fibers to strategically commit to a climate-neutral production. This vision is to be put into practice by 2050. By 2030, the company aims to achieve an interim goal of reducing emissions by 50 percent per ton of product compared to 2017.

In 2019, Lenzing was once again rated number one in the world in the “Hot Button Report” of the Canadian NGO Canopy, another highly regarded ranking. In this ranking, Canopy grades the world’s 32 largest producers of wood-based fibers with respect to their success in achieving sustainable wood and pulp sourcing.