From the Sector

Reset
4 results
(c) JEC Group
21.06.2019

JEC Forum Chicago 2019: A great success for this new format

JEC Forum Chicago 2019, with its new format combining business meetings and conference sessions was a great success. In fact, with 201 delegates and 490 business meetings organized on site, it reveals that North American composites industrials value this new format.

JEC Forum Chicago 2019, with its new format combining business meetings and conference sessions was a great success. In fact, with 201 delegates and 490 business meetings organized on site, it reveals that North American composites industrials value this new format.


Business and Knowledge all at once
The forum was the occasion for sponsors to showcase their solutions, industry buyers from all the composites value-chain to easily meet during pre-arranged business, without mentioning a great participation of Top buyers from Arevo, Bollinger Motors, Bouygues – CBNA: Civil & Building North America, and Florida Department of Transportation and John Deere. All confirmed that their meetings were very successful and would be leading to prolific cooperation in the future.

JEC World 2018 (c)AGENCE APOCOPE
Crowded aisle of JEC World 2018
08.03.2018

JEC World 2018: Composites Industry in Paris

  • JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries.

  • JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises. We also introduced one new planet called “Make it Real” along with the Aero, Auto and Construction planets. In this planet, we could discover astonishing futuristic products for example the Aeromobil, a flying car that would revolutionize urban transportation in the near future,“ she adds. “We launched our new Book on Natural Fibers: Flax and Hemp. We had strong communications on Composites Environmental Input and Recycling.”

The event was the first event to promote and host the new “French Fab”, a French government initiative to internationally promote the French Industry and Manufacture. Also, JEC World welcomed the French Secretary of State to the Minister of Economy and Finance Ms. Delphine Gény-Stephann, visit that demonstrates the growing role of composites in the industry.

Inspiring Keynotes to foster composites disruption

Dirk Ahlborn,CEO of Hyperloop opened the Startup Booster ceremony by supporting the spirit of ingenuity in the Industry. Dayton Horvath, industry expert and consultant in additive manufacturing presented his vision of how to apply artificial intelligence to composite Materials and Manufacturing. Finally, Yves Rossy, the “jetman” using the latest carbon-fiber wings for flight introduced the JEC Innovation awards ceremony, motivating the audience to pursue their dreams and explaining how composites could made his dreams come true.

The "Public Choice” Awards Winners

A first at the show this year was the introduction of the public votes to elect their favorite projects among two JEC programs promoting innovation. “The goal to create the “public choice awards” was to involve and embark our community to make their innovation loud. Our vision at JEC is to demonstrate and to make understand towards a broader scope the vast range of possibilities that composite materials offer.”
comments Ms. Anne-Manuèle Hébert, Director for JEC World and European Events for JEC Group.

Public Choice Award for Startup  Booster: Inca-Fiber (Germany) with 62.36% of the 2,221 votes
Public Choice Award for JEC Innovation Awards: Infusion technology for an aircraft wing by AeroComposit JSC (Russia) gaining 20.96% of the 4,126 votes.

Source:

AGENCE APOCOPE

20th anniversary of the JEC Innovation Awards (c) GROUPE JEC - Thierry-Alain TRUONG
07.03.2018

20th anniversary of the JEC Innovation Awards

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!

  • JEC Group pays tribute to the winners at JEC World 2018

The 2018 session of JEC World, the reference trade show organized by JEC Group, is in full swing and the focus is on innovation!
The JEC Innovation Awards ceremony, which took place on the Agora stage on Wednesday, March 7 at 5 pm, opened with a presentation by Yves Rossy, aircraft pilot and inventor of the first jet-powered wingpack. Then the jury revealed the names of the composite champions up for a JEC Innovation Award. Eleven winning innovations were chosen, out of the thirty finalists that had been previously selected from more than 100 applications from all over the world.

“JEC Group supports innovation. In 1998, it created the first award dedicated to composites, as a way to promote and reward the sector’s champions. Thanks to the work of JEC Group’s teams, the program has become an international benchmark. Each year, we receive more than a hundred applications from all over the world. Selection is now based on criteria like the level of involvement of the innovation’s partners in the value chain, the technical nature of the innovation, or its commercial applications,” explains JEC Group President & CEO Frédérique Mutel.
A new feature this year is that the jury revealed the winners during the ceremony, and the public could choose their favorite innovation before, during, and after the ceremony. So there is still time to vote! Votes are opened until Thursday March 8th, 5pm http://innovationawards.jec-world.events
Did you miss the ceremony?

11 AWARD WINNERS:
AEROSPACE APPLICATION

Winner:
AeroComposit, JSC (Russia) and its partner Solvay (United Kingdom)

  • Infusion technology for an aircraft wing

The use of infusion technology to manufacture primary structural components for an aircraft wing. The technology makes it possible to create extra-long, integrated composite structures with complex aerodynamic shapes.

AEROSPACE PROCESS 
2 tied winners!
Winner: Airbus (Germany) and its partners, BMW Group (Germany), Technical University of Munich (TUM) (Germany), Neue Materialien Bayreuth GmbH (Germany), Werkzeugbau Siegfried Hofmann GmbH (Germany), BASF SE (Germany), Foldcore GmbH (Germany), Neenah Filtration (Germany) and SGL Carbon GmbH (Germany)

  • Complex structural applications for MAI sandwich technology

Cost-effective production of a complex 2.5D structure made of thermoplastic composite sandwich, with very short cycle times: under 5 minutes for aerospace materials and 2.5 minutes for automotive materials.

Winner: M. Torres Diseños Industriales SAU (Spain)
Moldless process to manufacture one-piece parts
A new manufacturing process for oversized one-piece reinforced composite structures, without requiring the use of complete molds.

AUTOMOTIVE APPLICATION
Winner: Ford Werke GmbH (Germany) and its partners, Gestamp (United Kingdom), GRM Consulting (United Kingdom) and University of Warwick (United Kingdom)

  • Lightweight composite automotive suspension part

Structural suspension part made of lightweight composite, using a brand-new patented process for prepreg/SMC/steel overmolding that was designed using a new computer-aided engineering (CAE) technology.

AUTOMOTIVE PROCESS
Winner: Audi AG (Germany) and its partners, Voith Composites GmbH & Co. KG (Germany), Dow Automotive (Switzerland), and Zoltek Corp. (United States)

  • Series production of a rear panel module made of carbon composite

For the first time, the potential of carbon fiber reinforced plastics (CFRP) is used to full advantage in series production with a new rear panel module and cost-effective production technologies.

CONSTRUCTION & INFRASTRUCTURE
Winner: Komatsu Seiren Co., Ltd. (Japan) and its partners, Kanazawa Institute of Technology (Japan) and Nagase ChemteX Corporation (Japan)

  • Cabkoma cable made of CFRTP

Komatsu Seiren has developed a cable made of molded carbon fiber reinforced thermoplastic (CFRTP), using a very cost-effective process that consists in polymerizing a thermoplastic epoxy resin in situ.

MARINE
Winner: Uljanik JSC (Croatia)

  • Composite cargo decks for a vehicle carrier

On the SIEM Cicero, a vehicle carrier with a capacity of 7,000 vehicles, glass-fiber reinforced composites are used for a number of the structures for the cargo decks, thereby considerably reducing the ship’s weight, fuel consumption and CO2 emissions.

RAILWAY
Winner: ELG Carbon Fibre Ltd. (United Kingdom) and its partners, Alstom Transport (United Kingdom), Magma Structures (United Kingdom), the University of Birmingham (United Kingdom), and the University of Huddersfield (United Kingdom)

  • A bogie frame made of optimized lightweight carbon fiber

This project has developed the very first carbon-fiber bogie frame that uses a recycled material, making it possible to overcome the obstacles to a commercial adoption of this type of structure.

SPORTS & LEISURE
Winner: BMW Group (Germany) and its partners EDAG Engineering GmbH (Germany), KraussMaffei Technologies GmbH (Germany), Chr. Karl Siebenwurst GmbH & Co. KG (Germany), TUM-LCC (Germany), Automation W + R GmbH (Germany), and FHG-IGCV (Germany)

  • A modular construction system for the rear swing arm suspension of a motorcycle

A modular system to produce a complex-shape swing arm suspension reinforced with carbon fiber. The system can adjust the mechanical properties on a case-by-case basis, for a competitive cost and weight compared to metal solutions.

SMART CITIES
Winner: MC Materiales Compuestos (Argentina) and its partners, Plaquimet (Argentina), Purcom (Brazil), IS Groupe - Composite Integrity (France), and G12 Innovation (Brazil)

  • The Wet Core Pod composite housing module

The Wet Core Pod is a composite housing module with an industrialization potential that can facilitate the most complex, costly and difficult step in a construction project.

SUSTAINABLE DEVELOPMENT
Winner: Cetim-Cermat (France) and its partner, CETIM (France)

  • “3-in-1” line for producing recycled composites

A modular line that uses an innovative thermomechanical process to make large panels from recycled composites or plastics. The panels are then thermoformed into parts.
 

Source:

Dorothée David & Marion RISCH, Agence Apocope

26.02.2018

Hexcel’s Product Innovations for Aerospace, Automotive, Wind Energy and Marine at JEC WORLD 2018

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

More information:
Hexcel JEC World 2018 Aircraft
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE