From the Sector

The National Council of Textile Organizations (NCTO), National Chamber of the Textile Industry (CANAINTEX), and Canadian Textile Industry Association (CTIA) issued a joint statement urging President Donald Trump to reach a deal with Mexico and Canada to avoid imposing 25 percent tariffs on imports from these countries and to close the de minimis loophole immediately.

“All three of our countries are partners in a vital textile and apparel coproduction chain that generates $20 billion in two-way trade and helps support over 1.6 million jobs under the United States-Mexico-Canada Agreement (USMCA) — a trade deal that was negotiated during President Trump’s first term in office,” the associations said.

The U.S. textile industry ships $12.3 billion, or 53 percent, of its total global textile exports to Mexico and Canada. Those inputs come back as finished products to the United States under the USMCA.

Mexico exports $9 billion in textile and apparel to the United States. Mexico is the 4th largest exporter of textiles and the 6th largest exporter of apparel to the United States.

Canada exports approximately $1.8 billion in textiles and apparel to the United States and Mexico, with the United States being the destination for 64 percent of its total global textile export, including high-quality flame-resistant materials and medical equipment including PPE.

“While we fully support President Trump’s efforts to stem illegal migration and to address the fentanyl crisis as quickly as possible, we urge the administration to refrain from imposing penalty tariffs on imports from USMCA partners. We are focused on ensuring a normalized trading relationship between our countries,” said NCTO President and CEO Kim Glas. “Imposing penalty tariffs on imports from critical U.S. free trade agreement (FTA) partners will only serve to benefit China and other Asian countries that don’t play by the rules and to harm the U.S. textile industry and manufacturers in our Western Hemisphere supply chains.”

“As part of any deal with Mexico, Canada—and China—we also call on the Trump administration to end the de minimis tariff exemption immediately for imports from all countries. This loophole in U.S. trade law, which allows imports valued at $800 or less to enter the United States duty-free hurts our textile and apparel industries, rewards countries like China, and helps facilitate the flow of illegal and toxic products, such as fentanyl and fentanyl precursors into the U.S. market,” Glas added.

“Despite steps taken by our countries to prevent the importation of goods that are undervalued, made with forced labor or transshipped, we have seen firsthand how the Asian market has gained an unfair advantage through predatory trade practices, displacing companies and workers in our industries and undermining our critical coproduction chain,” said Rafael Zaga Saba President of CANAINTEX.

“Canada is seeking to preserve our strong coproduction chain with Mexico and the United States which spurs investment, trade and employment in our three countries,” said Jeff Ayoub, Chairman of the Board of CTIA. “These additional tariffs would harm our industries and workers, and we urge President Trump stop these expected tariffs from being imposed.”

“We look forward to working closely with the Trump administration and continuing to educate officials about the adverse impact of penalty tariffs on imports from Western Hemisphere countries and de minimis on our industries and workers, while highlighting the critical nature of our strong coproduction chain, which contributes to our overall investment, job growth, and economic stability,” the associations jointly added.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers.

• U.S. employment in the textile and apparel supply chain was 501,755 in 2023.
• The value of shipments for U.S. textiles and apparel was $64.8 billion in 2023.
• U.S. exports of fiber, textiles and apparel were $29.7 billion in 2023.
• Capital expenditures for textiles and apparel production totaled $2.27 billion in 2021, the last year for which data is available.

CANAINTEX is a Mexico City-based trade association representing Mexican textile producers.

• The textile industry in Mexico provides over 1.1 million jobs.
• Mexican textile exports are projected to reach 9 billion USD in 2024.
• Mexico is the 4th largest exporter of textiles and the 6th largest exporter of apparel to the United States.
• One out of every three pairs of pants sold in the U.S. is made in Mexico.
• With 36% domestic content in its exports, the textile industry generates the highest value-added of any manufacturing sector in the country.

CTIA represents domestic textile manufacturers across Canada, advocating for policies that support innovation, sustainability, and growth in the sector.

• The Canadian textile industry employs approximately 30,000 textile and apparel workers.
• The total value of shipments for Canadian textiles and apparel was approximately C$7.5 billion in 2023.
• Canada exported approximately US$2.66 billion in textiles in 2023, with 64% (US$1.71 billion) going to the United States.

The start to the premiere of the CHINA WAVE pavilion at Pitti Uomo 106: the first stop of the "2024 China National Garment Association Overseas Programme" was a complete success for the participating designer labels from China. The Chinese brands impressed the international fashion world with their exclusive and extraordinary collections at the Costruzioni Lorenesi in the Fortezza da Basso in Florence. The famous fashion journalist, Suzy Menkes, was also impressed by the creations.

The styles and current looks from from VALLEYOUTH, KB HONG BY K-BOXING, RAXXY, JDV, FENGGY, BLACKHEAD, KEYONE BY HATTERSHUB, TYPETAIL impressed buyers, fashionistas and media representatives alike with their design expertise, creativity and product quality. The combination of contemporary styles with traditional Chinese elements, as seen in the collections of KB HONG by BY K-BOXING, JDV and VALLEYOUTH, among others, attracted international audience from Italy, Germany, France, Great Britain, Spain, Saudi Arabia, the United Arab Emirates, the USA, Mexico, Canada, Australia and many more.

Among those welcomed to the pavilion was Suzy Menkes, who emphasised the combination of tradition and modernity in collections such as those from KB HONG by BY K-BOXING and VALLEYOUTH in the CHINA WAVE pavilion. VALLEYOUTH's new collection was presented by fashion photographer Acielle from style du monde at Vogue World, while fashion blogger Augusto Ferretti commented on the brands' designs as "artistic sculptures". The appearance of the famous Chinese actor and singer AYUNGA as a testimonial for the new KB HONG by BY K-BOXING collection at Pitti Uomo attracted particular attention.

Further stops of the "2024 China National Garment Association Overseas Programme" are Who's Next in Paris and TheOne Milano in Milan in September.

The next CHINA WAVE presentation at Pitti Uomo is planned for January 2025.

With over 400 exhibitors, the fourth Istanbul Fashion Connection event from August 9-11, 2023, at the Istanbul Expo Center on 35,000 sqm was again successful.

With over 20,000 visitors from more than 125 countries, IFCO recorded an increase in visitors of over 30% compared to August last year. International visitors more than doubled, with the largest visitor groups coming from Asia and the Middle East at 33% each, Europe at 17%, Africa 11% and the Americas at 6%.

All retail channels were represented at the show, from large shopping mall and department store groups to wholesalers, international retail chains, multi-brand boutiques and online platforms.

Exhibitors
In six clearly segmented halls, more than 400 brands presented themselves on 35,000 sqm from womenswear, menswear, kidswear sportswear, denim, leather and fur.

The Core Istanbul
For the second time, the exclusive design area The Core Istanbul, originally launched as part of Istanbul Fashion Week, presented itself at IFCO. Among others, Arzu Kaprol, Ceren Ocak, Çiğdem Akın, Essin Barış, Ezgi Karayel, Fulyaİlkmen - F.ILKK, Mehmet Emiroğlu, Meltem Özbek, Mert Erkan, Merve Ulu - Kuela, Murat Aytulum, Nejla Güvenç - Nej, Özlem Erkan, Selin Küçüksöz, Tuba Ergin joined the show. Menswear was also represented with Emre Erdemoğlu, Seydullah Yılmaz - SYHZ Wear and Yakup Biçer - Y Plus.

The Exclusive Area
Leading Turkish retail brands, already internationally active, showed in The Exclusive Area such as B&G Store, Climber BC, Damat, Giovane Gentile, Hatemoğlu, Ipekyol, Kayra, Kiğılı, Lee Cooper, Lufian, Jakamen, Naramaxx and convinced with their high quality, sustainable and fashionable products, which were in great demand among international buyers. Jakamen opened the IFCO Shows on the first day of the fair with its latest spring / summer collection for 2024.

FashionIst
With its own catwalk, the occasion fashion section FashionIst for women and men featured thirty leading brands and showed a cross-section of the latest designs in evening fashion with their innovative colors and dynamic styles. Daily fashion shows informed visitors about the latest trends.

B2B Match Making
The B2B Match Making at IFCO took place in speed dating mode and was well received. Exhibitors were efficiently networked with buyers from all over the world such as Inditex from Spain, Walmart, Quicksilver, Teddy Fresh or Wilbo from the USA, Sainsbury's from the UK, Cihuah from Mexico, the Apparel Group and Safari Group from the United Arab Emirates, Ria Miranda from Indonesia, Hi Style and Zalora from Malaysia, Musinsa from South Korea, Ackermans from South Africa etc.

IFCO February 2024
For the next date of IFCO (7.-10. February, 2024), the organizers expect more than 600 companies. The participation of international fashion companies is to be expanded, for which IFCO provides the ideal springboard into the European and Asian markets.

adidas TERREX announces a multi-season collaboration with National Geographic, consisting of high-performance outdoor wear. The inaugural collection is built to celebrate the role of photography in the culture of outdoor sport - as well-equipped hikers turn their ability to explore more places, and spirit of adventure, into stunning content.

To celebrate this relationship, designers at adidas TERREX combed the National Geographic photography archives for stunning stills of some of the most remote yet moving locations on earth, integrated in unique all over prints in a bold new hiking collection. All pieces are unified by National Geographic’s iconic yellow icon.

Places celebrated in the collection include a snow-covered sandstone monocline in Comb Ridge, Utah, a 120-mile-long, north to south stretch that defines the State’s red rock landscape, as well as textured portraits of shale, - captured on the coast of Norway’s northernmost county - highlighting the sedimentary rock’s distinctive formations.

The 51-piece collection includes women’s, men’s, and gender-neutral offerings – all built to equip the wearer in multi-terrain environments:

• A part of the collection is the RAIN.RDY Jacket; a 2.5L waterproof and seam-sealed outer garment built to facilitate epic adventures. The men’s jacket features a bold print of the shell formations in the Porsanger Peninsula, Norway, while the women’s is inspired by stills of White Sands National Park in New Mexico.
• A long sleeve shirt is finished with the bold National Geographic yellow icon and reflective details.
• The TERREX Swift R3 GORE-TEX Hiking shoes offer the peak combination of a lightweight construction and cushioning as seen in trail running shoes with the stability of a hiking boot. Finished in a print inspired by a stunning aerial shot of Earth, the hiking shoes come with a GORE-TEX lining and membrane seal so water is kept out, and a Continental™ Rubber outsole for optimal grip in wet or dry conditions.
• The WIND.RDY: GET SHELTERED Jacket, with wind-resistant technology and a water repellent ripstop fabric, allows explorers to feel protected and confident in many weather conditions. The men’s and women’s versions come with bold prints inspired by photography including that of sandstone and snow at Comb Ridge, Utah. Smart design features including a bungee-cord enabled adjustable hem, a lightweight fabric and reflective details. Additionally, it features a bold new lenticular logo design that alternates between Terrex and National Geographic from different perspectives – and is made in part with recycled materials.

Cone Denim®, a leader in denim authenticity and sustainable innovation, launches a new U.S. grown hemp denim collection in collaboration with expert hemp processing innovator, BastCore. Cone is excited to expand its sustainable denim offerings and increase its support of the American agriculture industry, featuring denim made with Alabama hemp and U.S. cotton and dyed with natural indigo grown in Tennessee.

Cone Denim is honored to partner with BastCore, a team that aligns with Cone’s values and its commitment to innovation, quality, sustainability, and traceability. The pioneers at BastCore have created patent-pending technology and a proprietary process that produces clean, mechanically processed, OEKO-TEX® STANDARD 100 certified and USDA bio-preferred hemp fiber out of its operation in Montgomery, Alabama.

Cone’s U.S. Hemp Collection includes a range of fabrics featuring classic 3×1 and comfort stretch to modern workwear constructions. The collection further expands upon Cone’s sustainability and traceability practices, driving the future of the industry. The proximity of the hemp, indigo, and cotton crops in the U.S. to the company’s mills in Mexico is also key in creating the smallest environmental impact and footprint possible.

Hemp offers many key benefits in creating the next level of sustainable denim:

• More than 50% water savings occur, compared to cotton
• No chemicals, wet processing, pesticides, or herbicides are used
• Hemp grows in a variety of soils with excellent biodegradability, is antimicrobial, has high tensile strength, moisture regain content, and tenacity
• Hemp and natural indigo crops have high rates of carbon sequestration, which ultimately benefits the environment and improves the soil’s health for other crops (climate positive)

• There is an urban legend that hemp canvas was used to make the very first pair of Levi’s jeans.
• While this is a myth that originated in the counterculture of the 1960s, hemp is without doubt the fibre of the moment for the denim industry.

At the second Kingpins24 virtual denim show that was broadcast from New York on June 23rd and 24th, the sustainable benefits of hemp fibre were referenced by many Monforts customers who are now including it in their collections, including AGI Denim, Artistic Milliners, Black Peony, Calik, Cone Denim, Naveena Denim Mills (NDM) and Orta.

“Hemp is an easy to grow fibre which requires no irrigation, no fertilizers, no herbicides and no chemicals,” says Allan Little, Director of Product Development for Cone Denim, which has recently launched its Sweet Leaf collection featuring the fibre. “Significantly, it also uses fifty per cent or even less water than cotton in cultivation.”

It can also bring some new aesthetics to denim too, he adds.

“Hemp has a unique colour and adds a different cast to our indigo, the drape and texture of the fabrics is different and it even adds  a bit of a unique hand, so combined with its sustainable credentials we are proud to be bringing the Sweet Leaf collection to the market.”

US supply chain

Cone is currently sourcing its hemp from France, but with much of its manufacturing now in Mexico – and with the introduction of the US Farm Bill in 2018 which has legalised the growing of legal hemp – is exploring the possibility of investing in the US supply chain.

“With US hemp we’re really at the R&D phase,” Little emphasises. “It’s a unique crop, so coming up with the right stalk to provide the right fibre is challenging. We’ve experimented with different types of seed and various methods of decortication.”

Decortication, he explains, is the mechanical removal of the outside layer of the hemp stalk to useable fibre on the inside. A second process, cottonization, is necessary to make the fibre suitable for spinning, because compared to cotton, hemp is longer, stiffer, and less flexible.

100% success

At the end of 2019, Naveena (NDM), headquartered in Karachi, introduced fabrics featuring up to 51% hemp content in blends with Tencel and recycled polyester and this year has developed the first 100% hemp denims.

“The response to the fabrics we showed last year was incredible and we were looking forward to the response to this latest development – which everyone was asking for – at the Kingpins show in Amsterdam, which unfortunately was unable to go ahead,” says NDM’s Director of Marketing Rashid Iqbal. “We produced initial samples in an undyed state because we were not sure how the wet spun yarn would react in the dyeing, but I’m happy to say we have had success in this respect and are now able to provide one hundred per cent indigo dyed hemp denim.”

Environmental benefits

“Differentiation is the key in the highly-competitive denim industry and we have assisted our customers with trials and optimised processing parameters for a range of different fibres, including hemp, both at our Advanced Technology Centre in Germany and at their own mills around the world,” says Hans Wroblowski, Monforts Head of Denim. “Given the environmental benefits of hemp, and the liberalisation of its cultivation in many parts of the world, the interest in it now comes as no surprise. We have the technologies and know-how to help our customers to fully maximise their hemp denims at all post-weaving stages of production.”

Monforts has a dominant position in the field of denim finishing with its well proven Montex stenters. It has been enjoying further recent success with its Eco Line concept based on two key technology advances – the Eco Applicator and the Thermo Stretch.

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing.

The CYD system also integrates new functions and processes into the weaving preparation processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre.