From the Sector

Reset
24.11.2025

CARBIOS: Two new multi-year commercial agreements for recycled PET

CARBIOS announced the signing of two new multi-year commercial agreements with major players in beverage industry, for the supply of recycled PET (r-PET).

The signing of these two new commercial agreements marks CARBIOS’s entry into a new strategic sector: beverages. Thgey are part of the pre-commercialization process for CARBIOS’s future industrial site, bringing the current level of pre-sales to approximately 50% of the site’s maximum production capacity.

Negotiations are ongoing with other partners to reach a pre-commercialization level of 70% of the Longlaville site’s maximum capacity, a threshold constituting one of the conditions for obtaining additional non-dilutive funding necessary to resume construction of the Longlaville plant.

A regional grant of €12.5 million has also been signed, bringing the total amount of public funding already secured to €42.5 million.

CARBIOS announced the signing of two new multi-year commercial agreements with major players in beverage industry, for the supply of recycled PET (r-PET).

The signing of these two new commercial agreements marks CARBIOS’s entry into a new strategic sector: beverages. Thgey are part of the pre-commercialization process for CARBIOS’s future industrial site, bringing the current level of pre-sales to approximately 50% of the site’s maximum production capacity.

Negotiations are ongoing with other partners to reach a pre-commercialization level of 70% of the Longlaville site’s maximum capacity, a threshold constituting one of the conditions for obtaining additional non-dilutive funding necessary to resume construction of the Longlaville plant.

A regional grant of €12.5 million has also been signed, bringing the total amount of public funding already secured to €42.5 million.

More information:
Carbios r-PET beverage
Source:

Carbios

Reinforced with dimensionally stable HMLS yarn, tires remain dimensionally stable even under load and temperature. (c) Oerlikon Barmag
Reinforced with dimensionally stable HMLS yarn, tires remain dimensionally stable even under load and temperature.
20.11.2025

Demand for high-performance yarns on the rise

Barmag, a subsidiary of the Swiss Oerlikon Group, will commission three HMLS yarn systems with a total of 30 stations at renowned technical yarn manufacturers in China over the next three months.

China expands HMLS capacities
Among them are two HMLS producers who had previously purchased from competitors. "They were convinced by our process technology, which guarantees the economic production of HMLS yarns of the very best quality," says Sales Director Oliver Lemke, who, together with his colleagues on site, provides support to customers in the field of technical yarns. The sophisticated material obtains its special properties during the spinning process. High speeds in the production process guarantee a stable arrangement of the molecules within the polymer that forms the actual thread. The internal structure of the molecular chain, in turn, is decisive for the dimensional stability of the final yarn.

Barmag, a subsidiary of the Swiss Oerlikon Group, will commission three HMLS yarn systems with a total of 30 stations at renowned technical yarn manufacturers in China over the next three months.

China expands HMLS capacities
Among them are two HMLS producers who had previously purchased from competitors. "They were convinced by our process technology, which guarantees the economic production of HMLS yarns of the very best quality," says Sales Director Oliver Lemke, who, together with his colleagues on site, provides support to customers in the field of technical yarns. The sophisticated material obtains its special properties during the spinning process. High speeds in the production process guarantee a stable arrangement of the molecules within the polymer that forms the actual thread. The internal structure of the molecular chain, in turn, is decisive for the dimensional stability of the final yarn.

Growing demand for HMLS yarns
The industry expects demand for HMLS yarns to increase in the coming years. This is mainly due to the trend toward lighter tires. Whereas high-modulus polyester yarn (HMLS) was previously used mainly in high-speed tires, its properties now also allow the tire carcass of small vans to be converted from steel cord to polyester. HMLS yarn is extremely tear-resistant, yet highly elastic and temperature- and dimensionally stable.

Another factor is the steadily increasing number of vehicle registrations worldwide. In China in particular, the production of local car brands has increased rapidly in recent years, which explains the expansion of capacity in the country.

New Focus Textiles, Haelixa Graphic by New Focus Textiles, Haelixa
20.11.2025

Evidence-based verification in recycled cotton sourcing

Hong Kong–based New Focus Textiles is adopting Haelixa’s Swiss DNA traceability technology to strengthen trust and transparency in recycled cotton production. 

Haelixa, the Swiss-based global leader in DNA-based traceability, has enabled New Focus Textiles to provide forensic proof of recycled cotton content across its textile-to-textile manufacturing operations. This marks a significant move towards evidence-based verification in recycled material sourcing, addressing one of the main credibility gaps in the circular materials market.  

DNA-based forensic traceability for recycled cotton  
Haelixa’s DNA marker is applied directly to post-industrial and post-consumer waste, before shredding, staying intact through New Focus Textiles’ mechanical recycling process. The non-toxic DNA marker, which is derived from Swiss mountain herbs, is a permanent tag, and cannot be removed or copied, remaining embedded throughout spinning, weaving, dyeing, and finishing.  

Hong Kong–based New Focus Textiles is adopting Haelixa’s Swiss DNA traceability technology to strengthen trust and transparency in recycled cotton production. 

Haelixa, the Swiss-based global leader in DNA-based traceability, has enabled New Focus Textiles to provide forensic proof of recycled cotton content across its textile-to-textile manufacturing operations. This marks a significant move towards evidence-based verification in recycled material sourcing, addressing one of the main credibility gaps in the circular materials market.  

DNA-based forensic traceability for recycled cotton  
Haelixa’s DNA marker is applied directly to post-industrial and post-consumer waste, before shredding, staying intact through New Focus Textiles’ mechanical recycling process. The non-toxic DNA marker, which is derived from Swiss mountain herbs, is a permanent tag, and cannot be removed or copied, remaining embedded throughout spinning, weaving, dyeing, and finishing.  

At any point, the material can be tested in an accredited laboratory using a simple PCR analysis to confirm origin and verify the presence of recycled content. This method provides physical proof of the recycled fibre identity, going beyond certification schemes that rely on documentation and chain-of-custody declarations.  

Strengthening supply chain assurance  
New Focus Textiles produces GRS-certified recycled cotton fabrics from post-industrial and post-consumer feedstock under its T2T™ (Textile-to-Textile) programme. The integration of Haelixa’s DNA-based traceability ensures each recycled batch is scientifically identifiable and can be aligned with digital records on platforms such as TextileGenesis, enhancing material transparency at supplier, auditor, and brand level.  

Preparing for regulatory compliance  
The system supports upcoming EU Digital Product Passport requirements and wider regulatory scrutiny over green claims. It reduces reputational and compliance risk for brands that prioritise recycled materials. 

Source:

New Focus Textiles

Trevira CS® at CSI Show Hamburg Graphic Trevira CS/Indorama Ventures
Trevira CS® at CSI Show Hamburg
20.11.2025

IMO-Tested Flame-Retardant Textiles: Trevira CS® at CSI Show Hamburg

Trevira CS, a leading brand of inherently flame-retardant textiles, is set to showcase its high-performance fabric solutions for the cruise ship industry at the CSI (Cruise Ship Interiors) Show in Hamburg on December 3rd and 4th. The booth's motto, "All aboard with Trevira CS," highlights the brand's commitment to safety and luxury in marine interiors. The exhibit will feature an array of some 27 IMO-tested Trevira CS fabrics specifically designed for cruise ship applications. 
 
Safety and Luxury Meet Rigorous Marine Standards 
As cruises worldwide continue to grow in popularity, the demand for luxurious and inviting textile designs which comply with uncompromising safety performance is increasing. Inherently flame retardant and easy to care for, Trevira CS fabrics comply with the strict FTP Code 2010 Resolution MSC.307(88), Annex 1, part 5, 7, 8, and 9 for various applications, such as wallcoverings, drapes and decorative fabrics, sunscreens, upholstery fabrics and bedding textiles.
 

Trevira CS, a leading brand of inherently flame-retardant textiles, is set to showcase its high-performance fabric solutions for the cruise ship industry at the CSI (Cruise Ship Interiors) Show in Hamburg on December 3rd and 4th. The booth's motto, "All aboard with Trevira CS," highlights the brand's commitment to safety and luxury in marine interiors. The exhibit will feature an array of some 27 IMO-tested Trevira CS fabrics specifically designed for cruise ship applications. 
 
Safety and Luxury Meet Rigorous Marine Standards 
As cruises worldwide continue to grow in popularity, the demand for luxurious and inviting textile designs which comply with uncompromising safety performance is increasing. Inherently flame retardant and easy to care for, Trevira CS fabrics comply with the strict FTP Code 2010 Resolution MSC.307(88), Annex 1, part 5, 7, 8, and 9 for various applications, such as wallcoverings, drapes and decorative fabrics, sunscreens, upholstery fabrics and bedding textiles.
 
The cruise shipping industry requires high-quality fabrics for both indoor and demanding outdoor environments. For exterior use, Trevira CS textiles offer superior performance in terms of resistance to light and weather. This is, for example, achieved through flame-retardant and UV stabilised polyester, available as staple fiber and filament yarn. Such modified filament yarns are available in nearly 30 different spun dyed colours. 
 
Recognizing the cruise industry's increasing focus on sustainability, Trevira CS also offers recycled options under the trademark Trevira CS eco. These fabrics contain at least 50% recycled materials (pre-consumer or post-consumer). All fibers and yarns used for the Trevira CS eco trademark are GRS (Global Recycled Standard) certified. 

“Our trademark testing makes sure that the Trevira CS articles are made of our original Trevira® flame retardant polyester and that the textiles thereof meet the fire safety requirements of the brand and are fit to pass those of the cruise industry too. Needless to say, that also the requirements of other industries like hospitality, healthcare, rail and aviation are respected and can be met by Trevira CS® as well,” says Petra Krücken, Indorama Ventures Fibers Global Trademark Service Manager. 

Dornbirn Global Fibre Conference Asia debuts in Mumbai Photo Messe Frankfurt Trade Fairs India
19.11.2025

Dornbirn Global Fibre Conference Asia debuts in Mumbai

In a remarkable union of innovation and global expertise, the world’s largest fibre innovation congress, the Dornbirn Global Fibre Conference (GFC) Asia, was successfully held in Mumbai on November 18, 2025, hosted under the banner of the Techtextil India Symposium 2025. 

Under the theme ‘Shaping the Future: Sustainable Growth in Fibre Solutions and Innovations’, the event was a dynamic confluence of ideas, research breakthroughs and collaborative exchanges aimed at propelling the textile industry into a new era of responsible growth. The conference was supported by the Government of Tamil Nadu as a Partner State. 

The day-long conference included the latest research on sustainable fibres, innovations in eco-friendly manufacturing, breakthroughs in recycling & circular economy practices and the evolution of smart technical textiles. Discussions also addressed global fibre market shifts, policy frameworks shaping the industry and strategies for integrating sustainability into business models. These topics reflect the most pressing imperatives and emerging opportunities for manufacturers, designers, technologists and policymakers alike. 

In a remarkable union of innovation and global expertise, the world’s largest fibre innovation congress, the Dornbirn Global Fibre Conference (GFC) Asia, was successfully held in Mumbai on November 18, 2025, hosted under the banner of the Techtextil India Symposium 2025. 

Under the theme ‘Shaping the Future: Sustainable Growth in Fibre Solutions and Innovations’, the event was a dynamic confluence of ideas, research breakthroughs and collaborative exchanges aimed at propelling the textile industry into a new era of responsible growth. The conference was supported by the Government of Tamil Nadu as a Partner State. 

The day-long conference included the latest research on sustainable fibres, innovations in eco-friendly manufacturing, breakthroughs in recycling & circular economy practices and the evolution of smart technical textiles. Discussions also addressed global fibre market shifts, policy frameworks shaping the industry and strategies for integrating sustainability into business models. These topics reflect the most pressing imperatives and emerging opportunities for manufacturers, designers, technologists and policymakers alike. 

The Dornbirn Global Fibre Conference is a collaboration between organisers, Messe Frankfurt Trade Fairs India Pvt Ltd and Austrian Fibers Institute. It cements India’s position as a powerhouse in textile innovation, sustainability and fibre technology. Set against the backdrop of India’s ambition to elevate its textile and apparel exports to USD 100 billion by 2030, the Dornbirn Global Fibre Conference Asia proved to be a seminal platform for industry visionaries to share pioneering discoveries and collaborate on building a greener, smarter, and more resilient textiles future. 

The conference highlighted key initiatives and industry potential:

  • India is leading in converting post-consumer waste than many other developed countries 
  • India recycles its bottles into yarn and plastic
  • India’s EPR for plastic waste could be beneficial for speeding up the recycling of plastic waste into fibres 
  • Using technology for collection and sorting will make feedstock available for the circular supply chain to work efficiently
  • India shows positive signs and a huge the potential to become a recycled polyester hub

The India edition of the Dornbirn GFC Asia uniquely blended global expertise with India's vibrant textiles sector—a market rapidly advancing in technological innovation, sustainability efforts and export ambitions. The industry’s leading brands who were part of the conference included: Dodhia Group, Lenzing, Oerlikon Polymer Processing Solutions, Birla Cellulose, Erema Group GmbH, High Performance Textile Ltd, Pan Healthcare Pvt Ltd, TextileGenesis, Bekaert, FibreCoat GmbH and more. 

Source:

Messe Frankfurt Trade Fairs India

Photo Kraig Biocraft Laboratories
18.11.2025

Kraig Biocraft Laboratories to deliver spider silk yarns for elite-tier athletic application

Kraig Biocraft Laboratories, Inc., a leader in spider silk technology*, announced that it is fulfilling an order for spider silk from a globally recognized performance sports apparel brand as part of a confidential pilot development program.
 
This project will incorporate the company’s  next-generation recombinant spider silk into a cutting-edge application targeted at the highest tier of performance apparel. While specific project details remain protected, Kraig Labs can confirm that the program is designed for one of the most demanding and innovation-focused segments of the athletic market.
 
This customer's market leadership, engineering sophistication, and reputation for excellence in performance apparel made them the ideal choice for this initial pilot engagement. Their market leadership and commitment to innovation is the reason Kraig Labs selected to fulfill this request from among the numerous recent inbound inquiries it received.
 

Kraig Biocraft Laboratories, Inc., a leader in spider silk technology*, announced that it is fulfilling an order for spider silk from a globally recognized performance sports apparel brand as part of a confidential pilot development program.
 
This project will incorporate the company’s  next-generation recombinant spider silk into a cutting-edge application targeted at the highest tier of performance apparel. While specific project details remain protected, Kraig Labs can confirm that the program is designed for one of the most demanding and innovation-focused segments of the athletic market.
 
This customer's market leadership, engineering sophistication, and reputation for excellence in performance apparel made them the ideal choice for this initial pilot engagement. Their market leadership and commitment to innovation is the reason Kraig Labs selected to fulfill this request from among the numerous recent inbound inquiries it received.
 
The Company is now processing a portion of its recombinant spider silk inventory into yarns tailored to the precise specifications provided by the customer's development team. Delivery of these specialized materials is expected before the end of the first quarter.
 
As a focused pilot program, this order calls for a small, purpose-built quantity of spider silk designed explicitly for this highly specialized application. Even at this limited scale, the project provides a powerful platform for demonstrating the performance capabilities and commercial potential of the Company's specialized spider silk technology within a premier performance environment.
 
"This collaboration underscores the growing recognition of our material's potential in high-value, high-performance applications," said Kim Thompson, Kraig Labs’ Founder and CEO. "We are excited to support this project and a customer whose commitment to innovation aligns with our own. We look forward to showcasing what our spider silk can deliver at the elite level of apparel design and performance."

Source:

Kraig Biocraft Laboratories

18.11.2025

Four substances recommended for REACH authorisation

The European Chemicals Agency (ECHA), to protect health and the environment, recommends that the European Commission adds four substances, including melamine, to the REACH Authorisation List. Once added to the list, companies must apply for authorisation if they wish to continue using the substances.

The recommendation includes the following substances:

  • Barium diboron tetraoxide;
  • S-(tricyclo[5.2.1.0 2,6]deca-3-en-8(or 9)-yl) O-(isopropyl or isobutyl or 2-ethylhexyl) O-(isopropyl or isobutyl or 2-ethylhexyl) phosphorodithioate;
  • Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide; and
  • Melamine.

ECHA has selected these substances from the Candidate List of substances of very high concern (SVHC) for this recommendation because, following the agreed approach, they are of the highest priority. 

The inclusion of melamine in the draft recommendation was comprehensively commented on by sectors using the substance during the 2024 consultation period but the decision to include it was made after careful consideration of all the issues.

The European Chemicals Agency (ECHA), to protect health and the environment, recommends that the European Commission adds four substances, including melamine, to the REACH Authorisation List. Once added to the list, companies must apply for authorisation if they wish to continue using the substances.

The recommendation includes the following substances:

  • Barium diboron tetraoxide;
  • S-(tricyclo[5.2.1.0 2,6]deca-3-en-8(or 9)-yl) O-(isopropyl or isobutyl or 2-ethylhexyl) O-(isopropyl or isobutyl or 2-ethylhexyl) phosphorodithioate;
  • Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide; and
  • Melamine.

ECHA has selected these substances from the Candidate List of substances of very high concern (SVHC) for this recommendation because, following the agreed approach, they are of the highest priority. 

The inclusion of melamine in the draft recommendation was comprehensively commented on by sectors using the substance during the 2024 consultation period but the decision to include it was made after careful consideration of all the issues.

Ofelia Bercaru, Director for Prioritisation and Integration, said: 
“When assessing the consequences of including a substance in the Authorisation List, it is important to consider the scope of the legal requirement. In most of its applications, melamine appears to be used as an intermediate, which does not require authorisation under REACH.
“However, applications for authorisation for the remaining uses may potentially create a significant workload for companies and authorities. ECHA is aware of the challenges and considered that balancing the risks posed by melamine with its continued use, requires a policy decision by the Commission and EU Member States.”

Background
ECHA has the legal obligation to regularly recommend substances from the Candidate List for the Commission to include in the Authorisation List. Before sending its recommendation to the Commission , ECHA considers comments received during a three-month consultation and the opinion of the Member State Committee.

The Commission will decide which substances are included in the Authorisation List and what conditions apply to each substance. If a substance is included in the Authorisation List, it can only be placed on the EEA market or used after a given date, if an authorisation is granted for a specific use.

The authorisation process aims to enhance the substitution of substances of very high concern when technically and economically viable alternatives are available. Until this is achieved, the goal is to ensure proper control of risks for human health and the environment.

Source:

European Chemicals Agency 

17.11.2025

Circulose partners with Marks & Spencer to accelerate Circular Fashion

Circulose has announced a partnership with Marks & Spencer (M&S), making the British retailer the first UK brand to join Circulose as a Scaling Partner. Circulose is a Swedish sustain-tech company that has developed a patented process, which enables the recycling of cellulosic textile waste, transforming it into a new material called CIRCULOSE®. Fast Company named Circulose (formerly Renewcell) one of the World’s Most Innovative Companies in 2021 and was a winner of the 2023 World Changing Ideas Awards.

By joining forces, M&S is reinforcing its commitment to sustainability and supporting Circulose’s mission to make circular materials mainstream. The brand will integrate a significant volume of CIRCULOSE® into its collections, helping drive broader adoption of next-generation circular materials across the industry.

Circulose has announced a partnership with Marks & Spencer (M&S), making the British retailer the first UK brand to join Circulose as a Scaling Partner. Circulose is a Swedish sustain-tech company that has developed a patented process, which enables the recycling of cellulosic textile waste, transforming it into a new material called CIRCULOSE®. Fast Company named Circulose (formerly Renewcell) one of the World’s Most Innovative Companies in 2021 and was a winner of the 2023 World Changing Ideas Awards.

By joining forces, M&S is reinforcing its commitment to sustainability and supporting Circulose’s mission to make circular materials mainstream. The brand will integrate a significant volume of CIRCULOSE® into its collections, helping drive broader adoption of next-generation circular materials across the industry.

CIRCULOSE®, made entirely from textile waste, helps fashion brands reduce their dependence on virgin fibers derived from trees, while delivering the same high quality and performance. By transforming discarded textiles into a new material, Circulose helps minimize waste, lower emissions, and ease pressure on land and forests, advancing the shift toward a global circular fashion system.

This partnership also validates Circulose’s renewed commercial strategy, centered on close, hands-on collaboration with global brands. Through its new licensing model and dedicated implementation support, Circulose supports brands to scale circular materials efficiently across the entire textile value chain, beyond capsule collections.

International Cotton Conference Bremen 2026 Graphic Bremer Baumwollbörse
International Cotton Conference Bremen 2026
17.11.2025

Let´s Talk about Cotton! International Cotton Conference Bremen 2026

Participants can now register online for the 38th International Cotton Conference Bremen, which will be held on 25-27 March 2026 at the Haus der Bürgerschaft parliament building on market square. 

The comprehensive range of topics covering the entire value chain will provide practical expertise, address current developments, answer key industry questions, and provide new impetus for the future.  
 
Speakers will report on the current world market situation, trade flows, and production and processing statistics. Regulatory conditions, on textile recycling or the circular economy for instance, have a significant impact on the cotton industry and will therefore also feature on the agenda. Hot topics will include new developments and innovations relating to our core topics of production, quality assessment and cotton processing. Other focal points will include the circular economy and cotton recycling.  

Participants can now register online for the 38th International Cotton Conference Bremen, which will be held on 25-27 March 2026 at the Haus der Bürgerschaft parliament building on market square. 

The comprehensive range of topics covering the entire value chain will provide practical expertise, address current developments, answer key industry questions, and provide new impetus for the future.  
 
Speakers will report on the current world market situation, trade flows, and production and processing statistics. Regulatory conditions, on textile recycling or the circular economy for instance, have a significant impact on the cotton industry and will therefore also feature on the agenda. Hot topics will include new developments and innovations relating to our core topics of production, quality assessment and cotton processing. Other focal points will include the circular economy and cotton recycling.  

Highlight: Modern agriculture on focus 
A special highlight will be a keynote speech on modern agriculture. There will also be further fascinating presentations exploring the topic of cotton breeding and cultivation, as well as new potential and opportunities for increased efficiency in processing. Not least because of increasing competition from synthetic fibres on the market. 

Appropriately, there will also be an exclusive session together with the Discover Natural Fibres Initiative (DNFI) on the subject of ‘Regulations in the EU and worldwide’, which will look at the latest political situation, for example under the Green Deal. There will also be further parallel sessions expanding on the conference topics, along with an exhibition of selected posters.   

With additional events and meetings throughout Cotton Week, the International Cotton Conference combines in-depth expertise with direct practical relevance. It is aimed at scientists from the respective fields, cotton traders, textile producers, textile machine manufacturers, the textile processing industry, textile retailers and NGOs involved in textiles. 

Source:

Bremer Baumwollbörse 

Eton’s role in automating the reuse market Photo AWOL Media
17.11.2025

Eton’s role in automating the reuse market

Eton Systems – a member of TMAS, the Swedish Textile Machinery Association – is taking part in the current Microfactories System Innovation project which is working on the development of a fully automated workflow for second hand garments.

Eton is contributing its well-proven transport system for material handling to the project, which also involves specialists at the Swedish School of Textiles in Borås, the Automation Region innovation cluster at Mälardalen University and the national collaboration platform iHubs Sweden.

High volumes
According to ThredUp’s 2025 Resale Report, the value of the global second-hand apparel market is already worth an annual $256 billion this year and growing at 10% annually to reach a value of $367 billion by 2029.

Additionally, the online resale segment alone is forecast to double over the next five years to around $40, billion reflecting higher growth of 17%.

Eton Systems – a member of TMAS, the Swedish Textile Machinery Association – is taking part in the current Microfactories System Innovation project which is working on the development of a fully automated workflow for second hand garments.

Eton is contributing its well-proven transport system for material handling to the project, which also involves specialists at the Swedish School of Textiles in Borås, the Automation Region innovation cluster at Mälardalen University and the national collaboration platform iHubs Sweden.

High volumes
According to ThredUp’s 2025 Resale Report, the value of the global second-hand apparel market is already worth an annual $256 billion this year and growing at 10% annually to reach a value of $367 billion by 2029.

Additionally, the online resale segment alone is forecast to double over the next five years to around $40, billion reflecting higher growth of 17%.

“The volumes are now so large that handling must be automated for it to work,” says Jan Molin, CEO of Eton Systems. “The new EU regulations requiring separate collection of textiles are having an impact, but we are also seeing an increasingly positive attitude towards reuse and greater awareness of the textile industry’s environmental impact.”

AI categorisation
As part of the project, a test facility is being established at Science Park Borås involving garments being placed on custom product carriers within an Eton Systems conveyor system and transported through a series of stations. 

The garments are inspected using a vision system, after which AI is employed to categorise them based on parameters such as manufacturer, model and size. Any damage is analysed and the system also provides recommendations for possible repairs.

“The collected information is fed into a calculation model that, based on market data, makes suggestions for a sales price,” Molin explains. “Finally, the garment is photographed for marketing and then transported to a warehouse awaiting sale.”

Historic automation 
Eton’s material handling system was developed as early as the 1960s for the company’s own shirt production in Gånghester outside Borås. At the time, material handling was estimated to account for up to 80% of the manufacturing time. 

The company’s Unit Production System (UPS) was developed as an automated ceiling-mounted conveyor system that moved the shirts one by one through the various work steps, the company was able to move from mass production to one-off production.

“It provided many benefits, including shorter lead times, greatly reduced material handling time and better ergonomics for operators,” says Molin. “Quality defect costs were also reduced because defects could be detected on individual products instead of at the batch level.”

The UPS concept was very successful and in 1967 was spun off into the stand-alone automation company Eton Systems, which now runs its operations in a modern production facility in Nordskogen in Borås. Its customers are global with an emphasis on clothing production, home textiles and furniture manufacturing, but the system is also used in, for example, the transport and handling of plastic parts for the automotive industry.

Opportunities for Swedish industry
The textile industry has a major environmental impact, not least through extensive overproduction. Clothing companies often order large volumes from the manufacturers and what does not sell is sold out or destroyed. 

The Microfactories System Innovation project builds on previous projects that have mainly focused on developing small-scale, local and needs-based production. Now the focus is on the growing market for reuse.

“We see enormous potential in second hand,” says Molin. “It is an area that is growing rapidly and where there is room for innovation and new business models. There is also the opportunity to move technology from other industries.”

Work on the project started in 2024 and will continue for four years. For Eton Systems, participation means both a chance to test new applications for its technology and to strengthen the company’s ability to innovate.

“Collaboration with universities and innovation environments helps us to be at the forefront,” says Molin. “We can participate in freer and more visionary development, without having to take on all the work ourselves. But above all, it is about contributing to a more circular industry, where materials can be used for longer and in a smarter way.”

Accelerating circular systems
“It’s very encouraging to note this growing willingness by many consumers to embrace the second-hand market as an important component of the drive towards accelerating circular systems,” adds TMAS General Secretary Therese Premler-Andersson. “Automation and digitalization as developed by Swedish companies like Eton are increasingly innovating ways in which this market – and more generally textile manufacturing and retailing – can be sustained and made ever more efficient in the general fight against textile waste.”

The Microfactories System Innovation project is funded by the European Regional Development Fund, the Swedish Agency for Economic and Regional Growth, Region Västra Götaland and Region Västmanland.

14.11.2025

NCTO: Push for reinstatement of duty-free treatment for qualified textile and apparel goods

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber, yarn and fabrics to finished sewn products, applauded the administration’s announcement today of plans to reinstate duty-free treatment for qualified textile and apparel goods from Guatemala and El Salvador under the Dominican Republic-Central America-United States Free Trade Agreement (CAFTA-DR).

National Council of Textile Organizations President and CEO Kim Glas:
“NCTO and our industry leaders have long been pushing for the reinstatement of duty-free treatment for qualified textile and apparel goods for our CAFTA-DR partner countries. We welcome the administration’s announcements about restoring these benefits for Guatemala and El Salvador and continue to press for a resolution for the other trade partners including Honduras, the Dominican Republic and Costa Rica, while acknowledging that the administration is conducting an extensive review under Section 301 of Nicaragua and their human rights violations under a separate track.

The National Council of Textile Organizations (NCTO), representing the full spectrum of U.S. textiles from fiber, yarn and fabrics to finished sewn products, applauded the administration’s announcement today of plans to reinstate duty-free treatment for qualified textile and apparel goods from Guatemala and El Salvador under the Dominican Republic-Central America-United States Free Trade Agreement (CAFTA-DR).

National Council of Textile Organizations President and CEO Kim Glas:
“NCTO and our industry leaders have long been pushing for the reinstatement of duty-free treatment for qualified textile and apparel goods for our CAFTA-DR partner countries. We welcome the administration’s announcements about restoring these benefits for Guatemala and El Salvador and continue to press for a resolution for the other trade partners including Honduras, the Dominican Republic and Costa Rica, while acknowledging that the administration is conducting an extensive review under Section 301 of Nicaragua and their human rights violations under a separate track.

“We sincerely thank Rep. Richard Hudson (R-NC-09), Rep. David Rouzer (R-NC-07), and many members of the House Textile Caucus for their leadership and efforts in helping reinstate duty-free benefits for CAFTA-DR countries in support of the domestic textile chain.  Today was a first great step and we want to thank President Trump, U.S. Trade Representative Ambassador Jamieson Greer, and the administration for this important decision. 

“The CAFTA-DR region forms a vital co-production chain with the American textile supply chain, facilitating $11.3 billion in two-way trade in 2024 and supporting more than 470,000 U.S. workers in the domestic textile sector alone. However, since reciprocal tariffs were imposed on qualifying CAFTA-DR trade, U.S. textile and apparel imports from our free trade partner countries have declined 8 percent year to date in 2025 through July, while U.S. imports from top Asian suppliers have increased by double digits.

“The restoration of duty-free status for qualified goods from El Salvador and Guatemala is a critical key first step for our collective industries.  Restoring duty-free textile and apparel qualified goods from the CAFTA-DR region is important to bolster the U.S. textile supply chain can help bring some stability to this critical sector. The U.S. -Western Hemisphere supply chains stand as a bulwark to China and other Asian countries. We look forward to working with the Trump administration and lawmakers to find a resolution that will restore duty-free treatment for qualified trade for this vital region.”

Source:

National Council of Textile Organizations NCTO