From the Sector

Reset
58 results
26.03.2024

CARBIOS joins Paris Good Fashion

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS will be particularly involved in the association's project to set up a working group dedicated to the development of a "fiber-to-fiber" industry, one of Paris Good Fashion's top priorities over the next five years. While only 1% of textiles are currently recycled fiber-to-fiber (circular), this working group will identify levers for significantly increasing the share of recycled fibers in the industry.  Polyester currently follows a linear model from which we need to break out: virgin polyester is made from petroleum, and recycled polyester from PET bottles. After use, most of these products end their lives in landfill or incineration. A circular, "fiber-to-fiber" industry will give new life to textiles and reduce the environmental impact associated to their end-of-life management.

Source:

Carbios

22.03.2024

Fashion for Good: Ten new innovators for 2024 programme

Building on a renewed five-year strategy, Fashion for Good selects ten new innovators for its 2024 programme to receive tailored support validating their technologies. This cohort represents an increased focus on novel footwear material and recycling technologies, man-made cellulosics, and nylon recycling.

The 2024 Innovation Programme provides support based on the development stage and ambitions of each innovator, matching them with relevant industry partners to drive technology and impact technology and impact validation as well as investing activities.

The selected innovators joining the 2024 Innovation Programme are:

Building on a renewed five-year strategy, Fashion for Good selects ten new innovators for its 2024 programme to receive tailored support validating their technologies. This cohort represents an increased focus on novel footwear material and recycling technologies, man-made cellulosics, and nylon recycling.

The 2024 Innovation Programme provides support based on the development stage and ambitions of each innovator, matching them with relevant industry partners to drive technology and impact technology and impact validation as well as investing activities.

The selected innovators joining the 2024 Innovation Programme are:

  • Algreen Ltd: Algreen co-develops alternative materials from algae and biobased sources that can replace fossil-based products such as PU.
  • Balena: Balena creates biodegradable partly biobased polymers for footwear outsoles.
  • Epoch Biodesign: Epoch Biodesign is an enzymatic recycler of PA66 and PA6 textile waste.
  • Fibre52: Fibre52 is a bio-based solution replacing traditional bleach prepared-for-dyeing and dye processes.
  • Gencrest BioProducts Pvt Ltd: Gencrest works with various agri-residues to convert them into textile-grade fibres using their enzymatic technology.
  • HeiQ AeoniQ: HeiQ AeoniQ™ is a continuous cellulose filament yarn with enhanced tensile properties.
  • Nanollose - Nullabor: Nullarbor™Lyocell is developed from microbial cellulose which is converted into pulp pulp to produce a lyocell fibre with their partner Birla Cellulose.  
  • REGENELEY:  REGENELEY pioneers advanced shoe sole recycling technologies by separating and recycling EVA, TPU, and rubber components found in footwear.
  • Samsara Eco: Samsara Eco is an enzymatic recycler of PA66 and PET textile waste.
  • SEFF: SEFF Fibre produces cottonised fibres and blends of hemp fabrics utilising a patented HVPED process.
Source:

Fashion for Good

08.03.2024

Autoneum: Two new plants in China and India

  • Autoneum is expanding its production capacities in Asia with two new plants in Changchun in the Chinese province of Jilin and Pune in Western India.

The world's largest automotive market Asia is one of the most important sales regions for vehicle manufacturers and suppliers as well as a pioneer for new forms of e-mobility. Autoneum already supplies both international and local vehicle manufacturers in Asia with multifunctional lightweight components for noise and heat protection, supporting them in their commitment to sustainable mobility. Autoneum is expanding its production capacities in the key automotive hubs of China and India to increase its presence and thus its proximity to customers in these important production centers.

  • Autoneum is expanding its production capacities in Asia with two new plants in Changchun in the Chinese province of Jilin and Pune in Western India.

The world's largest automotive market Asia is one of the most important sales regions for vehicle manufacturers and suppliers as well as a pioneer for new forms of e-mobility. Autoneum already supplies both international and local vehicle manufacturers in Asia with multifunctional lightweight components for noise and heat protection, supporting them in their commitment to sustainable mobility. Autoneum is expanding its production capacities in the key automotive hubs of China and India to increase its presence and thus its proximity to customers in these important production centers.

Autoneum’s new plant in China, which will be operated as a joint venture, will be located in Changchun in the northern Chinese Jilin province, which is one of Asia’s largest car production centers. The proximity to key local and international vehicle manufacturers makes Changchun a strategically important and attractive location for Autoneum. The plant will help to increase market share with European, Japanese and Chinese car manufacturers with products for light vehicles and also support the expansion of the Company’s business with components for commercial vehicles in this region. The project is supported by the local authorities in China. From the end of 2024, the plant will ramp up production with first samples for already awarded business for inner dashes, interior floor insulators and other NVH (noise, vibration, harshness) components for cars of all drive types.

Autoneum is furthermore expanding its local presence in Western India with a fully owned production facility in Pune in the state of Maharashtra. The Company already operates two locations in India: one in Behror near New Delhi in the north and a joint venture plant in Chennai in the south. Thanks to the new Pune plant, Autoneum will now be present in the north, west and south of the country and gain access to the third of four major automobile production centers in India. Orders have already been received and the plant in Pune will start manufacturing carpet systems, interior trim, wheelhouse outer liners, e-motor covers and other noise protection components as of the second quarter of 2024. From the 7 500 square meter building, Autoneum will supply international as well as local car manufacturers with a particular focus on Indian and Korean vehicle manufacturers.

Source:

Autoneum Management AG

CARBIOS and Landbell Group: Collaboration for biorecycling plant (c) Landbell Group / CARBIOS
01.03.2024

CARBIOS and Landbell Group: Collaboration for biorecycling plant

CARBIOS and Landbell Group, a global operator of more than 40 producer responsibility organizations (PROs) and a provider of closed-loop recycling solutions, announce the signing of a non-binding Memorandum of Understanding for the sourcing, preparation and recycling of post-consumer PET waste using CARBIOS’ biorecycling technology at its first commercial plant in Longlaville from 2026.  

The partnership will leverage Landbell Group’s expertise and network in the sourcing of PET packaging and textile waste which will be prepared for biorecycling. Thanks to CARBIOS’ highly selective enzyme, less sorting and washing is required compared to current recycling technologies, offering future savings in energy and water use. From 2026, Landbell Group will supply CARBIOS with 15 kt/year of PET flakes, ensuring a steady supply chain for sustainable PET production. These flakes will serve as essential feedstock for CARBIOS’ production of food-grade PTA and MEG, further re-polymerized into PET.

CARBIOS and Landbell Group, a global operator of more than 40 producer responsibility organizations (PROs) and a provider of closed-loop recycling solutions, announce the signing of a non-binding Memorandum of Understanding for the sourcing, preparation and recycling of post-consumer PET waste using CARBIOS’ biorecycling technology at its first commercial plant in Longlaville from 2026.  

The partnership will leverage Landbell Group’s expertise and network in the sourcing of PET packaging and textile waste which will be prepared for biorecycling. Thanks to CARBIOS’ highly selective enzyme, less sorting and washing is required compared to current recycling technologies, offering future savings in energy and water use. From 2026, Landbell Group will supply CARBIOS with 15 kt/year of PET flakes, ensuring a steady supply chain for sustainable PET production. These flakes will serve as essential feedstock for CARBIOS’ production of food-grade PTA and MEG, further re-polymerized into PET.

Through the partnership with Landbell Group in Germany, the supply of multilayer trays through the CITEO tender in France  and the MoU with Indorama Ventures, CARBIOS will have sourced over 70% of its feedstock required for the 50kt/year capacity when its first commercial plant in Longlaville, France, will operate at full capacity. Close to the borders with Belgium, Germany and Luxembourg, the plant’s location is strategic for nearby waste supplies.

Through this partnership with CARBIOS, Landbell Group will ensure that the problematic PET fractions such as multilayered, colored and opaque trays from packaging waste and polyester textile waste are redirected towards recycling. In this way, Landbell Group strengthens its commitment to the development of recycling solutions to enable a circular economy.

19.02.2024

CARBIOS and De Smet Engineers & Contractors: Partnership for construction of PET biorecycling plant

CARBIOS and De Smet Engineers & Contractors (DSEC), a provider of Engineering, Procurement and Construction services in the biotech’s and agro-processing industries, announce their collaboration to spearhead the construction of the world's first PET biorecycling plant. Under the agreement, De Smet has been entrusted with the project management and detailed engineering, including procurement assistance and CARBIOS partners’ management, to ensure the execution of the plant's construction in Longlaville, France, due for commissioning in 2025.  CARBIOS’ first commercial facility will play a key role in the fight against plastic pollution by offering an industrial-scale solution for the enzymatic depolymerization of PET waste to accelerate a circular economy for plastic and textiles.

With over 70 members of De Smet's expert team dedicated to the project and working alongside CARBIOS teams, the collaboration aims to guarantee the project timeline and budget while upholding quality, safety, health, and environmental standards. Construction is currently underway and on schedule.

CARBIOS and De Smet Engineers & Contractors (DSEC), a provider of Engineering, Procurement and Construction services in the biotech’s and agro-processing industries, announce their collaboration to spearhead the construction of the world's first PET biorecycling plant. Under the agreement, De Smet has been entrusted with the project management and detailed engineering, including procurement assistance and CARBIOS partners’ management, to ensure the execution of the plant's construction in Longlaville, France, due for commissioning in 2025.  CARBIOS’ first commercial facility will play a key role in the fight against plastic pollution by offering an industrial-scale solution for the enzymatic depolymerization of PET waste to accelerate a circular economy for plastic and textiles.

With over 70 members of De Smet's expert team dedicated to the project and working alongside CARBIOS teams, the collaboration aims to guarantee the project timeline and budget while upholding quality, safety, health, and environmental standards. Construction is currently underway and on schedule.

1000 international exhibitors at DOMOTEX 2024 (c) Deutsche Messe AG
08.01.2024

Over 1000 international exhibitors at DOMOTEX 2024

From 11 to 14 January 2024, the global carpet and flooring industry will meet at the Hannover exhibition grounds to discuss new products and current industry trends. With 1,000 international exhibitors, DOMOTEX promises a comprehensive overview of the Flooring und Carpets & Rugs sectors.

In addition to top exhibitors from the Carpets & Rugs sector, numerous global brands from the flooring industry will be exhibiting.
Well-known and long-standing exhibitors such as Area Floors, Amorim, Lamett, Li & Co, Camsan, Design Parquet, CFL Flooring, AGT, Forestry Timber, STP, SWISS KRONO, Decospan, Massive Holding, Floorify and Granorte have confirmed their participation. However, new exhibitors or those who have not participated for several years are also back in 2024 – including Kronospan and Kaindl, mFlor, Onefloor, Republic, Classen, Gerflor and MeisterWerke. From the field of application and installation technology, Neuhofer, SELIT, Välinge, Estillon, Shaper Origin, ADESIV, KLEIBERIT and i4F have also announced their participation.

From 11 to 14 January 2024, the global carpet and flooring industry will meet at the Hannover exhibition grounds to discuss new products and current industry trends. With 1,000 international exhibitors, DOMOTEX promises a comprehensive overview of the Flooring und Carpets & Rugs sectors.

In addition to top exhibitors from the Carpets & Rugs sector, numerous global brands from the flooring industry will be exhibiting.
Well-known and long-standing exhibitors such as Area Floors, Amorim, Lamett, Li & Co, Camsan, Design Parquet, CFL Flooring, AGT, Forestry Timber, STP, SWISS KRONO, Decospan, Massive Holding, Floorify and Granorte have confirmed their participation. However, new exhibitors or those who have not participated for several years are also back in 2024 – including Kronospan and Kaindl, mFlor, Onefloor, Republic, Classen, Gerflor and MeisterWerke. From the field of application and installation technology, Neuhofer, SELIT, Välinge, Estillon, Shaper Origin, ADESIV, KLEIBERIT and i4F have also announced their participation.

In addition to the main exhibition, DOMOTEX will offer a variety of side events designed to provide important impulses for the day-to-day business of all trade visitors

THE GREEN COLLECTION
For the second time, THE GREEN COLLECTION in Hall 23 will highlight the latest developments in the fields of sustainability, circular economy and environmental protection in the carpet and flooring industry for visitors to experience first-hand. The special display includes current research projects by TFI Aachen, a haptic material show by raumprobe and product presentations by companies such as Uzin Utz, Classen and Gerflor.

RETAILERS‘ PARK
In collaboration with DECOR-UNION and the MEGA Group, DOMOTEX will be expanding its portfolio to include the two product segments "wall" and "ceiling" for the first time. In addition to other flooring suppliers, the RETAILERS' PARK in Hall 19/20 will feature products for holistic interior design, including paints and coatings from Südwest, Meffert and PPG Coatings as well as wallpapers from AS and Erfurt. Participants can also look forward to practical solutions for their day-to-day business, presented in the area's own user forum through hands-on live demonstrations.

DOMOTEX on Stage
The conference program in Hall 23 features experts from the retail sector, associations, architecture, interior design, trade and politics, who will offer a holistic view of the topics of the future for the entire industry. On Friday, 12 January, German politician and member of the European Parliament Reinhard Bütikofer will give a presentation on the European Green Deal. Joachim Stumpp, Managing Director of raumprobe, and Chiara Rodriguez from Materially will report on sustainable materials. In addition to sustainability, topics relating to trends, new work and the shortage of skilled workers will also play a keyrole at DOMOTEX on Stage.

Source:

Deutsche Messe AG

Carbios published Sustainability Report for 2022 (c) Carbios
29.12.2023

Carbios published 2022 Sustainability Report

CARBIOS published its second Sustainability Report with 2022 as the reference year. Like the first, this report is not subject to any publication obligation for the company, confirms CARBIOS' commitment and desire for transparency in terms of environmental, social and governance (ESG) initiatives.

In 2022, several objectives were achieved:

CARBIOS published its second Sustainability Report with 2022 as the reference year. Like the first, this report is not subject to any publication obligation for the company, confirms CARBIOS' commitment and desire for transparency in terms of environmental, social and governance (ESG) initiatives.

In 2022, several objectives were achieved:

  • Increase of the number of independent directors on the Board of Directors,
  • Completion of the first carbon footprint report to sustainably reduce greenhouse gas emissions,
  • Consolidation of the life cycle analysis (LCA) of the PET enzymatic depolymerization process,
  • Continuation of employee training in safety and environmental issues.

In October 2023, CARBIOS appointed Bénédicte Garbil as Senior Vice President of Corporate Affairs and Sustainability: "In 2022, CARBIOS strengthened its governance, building a solid foundation for our continued growth and commitment to Corporate Social Responsibility (CSR). This strategic development demonstrates our commitment to operational excellence and transparency. We have integrated the principles of sustainability, ethics and environmental responsibility at the heart of our governance, putting CSR at the forefront of our actions."

Source:

Carbios

15.11.2023

Indorama Ventures: 3Q23 Performance report

  • Revenue of US$3.9B, a decline of 1% QoQ and 20% YoY
  • EBITDA of US$324M, an increase of 1% QoQ and a decrease of 37% YoY
  • Operating cash flows of US$410M
  • Net Operating Debt to Equity of 0.97x
  • EPS of THB 0.00

Indorama Ventures Public Company Limited (IVL) reported stable third-quarter earnings as the company’s management focuses on conserving cash and improving competitiveness to bolster performance in a continued period of weakness in the global chemical industry.

Indorama Ventures achieved EBITDA of $324 million in 3Q23, an increase of 1% QoQ and a decline of 37% YoY, impacted by a weak economic environment, geopolitical tensions, and continued post-pandemic disruptions in global markets. Sales volumes dropped 5% from a year ago to 3.6 million tons as China recovers from the pandemic more slowly than expected and an extended period of destocking in the manufacturing and chemical sectors continues to normalize from unprecedented levels last year.

  • Revenue of US$3.9B, a decline of 1% QoQ and 20% YoY
  • EBITDA of US$324M, an increase of 1% QoQ and a decrease of 37% YoY
  • Operating cash flows of US$410M
  • Net Operating Debt to Equity of 0.97x
  • EPS of THB 0.00

Indorama Ventures Public Company Limited (IVL) reported stable third-quarter earnings as the company’s management focuses on conserving cash and improving competitiveness to bolster performance in a continued period of weakness in the global chemical industry.

Indorama Ventures achieved EBITDA of $324 million in 3Q23, an increase of 1% QoQ and a decline of 37% YoY, impacted by a weak economic environment, geopolitical tensions, and continued post-pandemic disruptions in global markets. Sales volumes dropped 5% from a year ago to 3.6 million tons as China recovers from the pandemic more slowly than expected and an extended period of destocking in the manufacturing and chemical sectors continues to normalize from unprecedented levels last year.

Management continues to focus on conserving cash, realizing efficiency improvements, and optimizing the company’s operational footprint to boost profitability. These efforts resulted in positive operating cash flow of US$410 million in the quarter, positive free cash flow of $79 million year to date, and room for further reductions in working capital going forward. The company’s AA- rating was maintained by TRIS in the quarter, with a stable outlook. 

The company expects the operating environment to improve in 2024 as customer destocking continues to ease across all three of Indorama Ventures’ segments. The ramp up of PET and fibers expansion projects operations in India and the U.S. will also contribute to increased volumes.  

Combined PET posted EBITDA of $146 million, a 25% decline QoQ, amid historically low benchmark PET margins, increased feedstock prices in Western markets, and lingering effects of destocking. Integrated Oxides and Derivatives (IOD) segment posted a 27% rise in EBITDA to $119 million QoQ, supported by strong MTBE margins in the Integrated Intermediates business. The Integrated Downstream portfolio’s profitability was impacted by destocking, inflationary pressures, and margin pressure from imports. Fibers segment achieved a 140% increase in EBITDA to $48 million QoQ as Lifestyle volumes grew in key markets in Asia, and the Mobility and Hygiene verticals benefited from management’s focus on optimizing operations and refocusing the organization. 
 

Source:

Indorama Ventures Public Company Limited

A Dress For Venice 2023 Illustration by Jacopo Ascari for A Dress For Venice 2023
05.09.2023

A Dress For Venice - Debut at the International Film Festival

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

  • Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
  • Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

  • Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
  • Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

On Thursday, September 7th, at 12:30, in the Veneto Region's room at the Hotel Excelsior on Lido, Elena Donazzan, Councilor for Education, Training, Employment, and Equal Opportunities, will present the project alongside its creators Laura Scarpa and Lorenzo Cinotti of Venezia da Vivere, designer Tiziano Guardini, artist Jacopo Ascari, and actress Margot Sikabonyi.

"We conceived A Dress For Venice for Homo Faber in 2019, to celebrate Venice's 1600 years of craftsmanship," explains Laura Scarpa. "This year, the research extends to sustainable innovation thanks to an international team of designers, artisans and companies," continues Lorenzo Cinotti.

The project reaffirms Venice's role as an international laboratory to reflect on the planet's future. "A Dress For Venice" is a limited-edition collection realized with the support of a network of companies identified by the Tavolo Veneto della Moda (Confartigianato, CNA, Confindustria, Confesercenti and Confcommercio of Veneto), the global platform C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy), the partnership of Camera Buyer Italia and the media partnership of The Italian Rêve.

The presentation of the collection to buyers will take place at the Marina Guidi showroom in mid-September, while it will have its dedicated exhibition on Friday, October 20th, during the Venice Fashion Week.

"A Dress for Venice" is endorsed by the Comune di Venezia, the Regione del Veneto, and Homo Faber - Fondazione Cologni dei Mestieri d’Arte, which promotes worldwide high craftsmanship and savoir-faire.

Partners in the project Infinity srl and Tessitura Grisotto, renowned Italian textile manufacturers who expertly craft Bemberg™ fiber into exquisite fabrics. Creazioni Digitali, a specialized company in sublimation digital printing, carries out the prints on Bemberg™ textiles with its unique project GreenDrop; with inks that reduces the water consumption.

Other partners include Marina Iremonger, Camera Buyer Italia, and the Tavolo Veneto della Moda, representing Confartigianato, CNA, Confindustria, Confcommercio, and Confesercenti.

More information:
Venice Asahi Kasei Bemberg™
Source:

C.L.A.S.S. Eco Hub

24.07.2023

Indorama Ventures and SMBC: Thailand’s first sustainability-linked Trade Finance facility

Indorama Ventures Public Company Limited and Sumitomo Mitsui Banking Corporation (SMBC) signed Thailand’s first sustainability-linked Trade Finance facility of US$50 million to support Indorama Ventures’ contributions to its ambitious sustainability commitment. This new facility reflects Indorama Ventures’ leadership in leveraging sustainable financing in Thailand.

The new facility is short-term working capital finance linked to the company’s sustainability performance targets, including reducing greenhouse gas (GHG) emissions intensity by 10% by 2025 (from a 2020 base), increasing post-consumer PET bale input for recycling to 750,000 tons by 2025, and boosting renewable electricity consumption to 25% by 2030.

Indorama Ventures Public Company Limited and Sumitomo Mitsui Banking Corporation (SMBC) signed Thailand’s first sustainability-linked Trade Finance facility of US$50 million to support Indorama Ventures’ contributions to its ambitious sustainability commitment. This new facility reflects Indorama Ventures’ leadership in leveraging sustainable financing in Thailand.

The new facility is short-term working capital finance linked to the company’s sustainability performance targets, including reducing greenhouse gas (GHG) emissions intensity by 10% by 2025 (from a 2020 base), increasing post-consumer PET bale input for recycling to 750,000 tons by 2025, and boosting renewable electricity consumption to 25% by 2030.

Indorama Ventures has secured a total US$2.4 billion in long-term sustainable financing from various national and international financial institutions between 2018–2022. The funds are supporting the company’s expansion and sustainability projects in line with its strategy under Vision 2030 as a purposeful company with ESG at its core.

Source:

Indorama Ventures Public Company Limited 

10.05.2023

Indorama Ventures reports improved quarterly earnings

  • 1Q23 Performance Summary
  • Revenue of US$4B, an increase of 3% QoQ and a decline of 9% YoY
  • Reported EBITDA of US$301M, an increase of 269% QoQ and decrease of 62% YOY
  • Operating cash flows of US$201M
  • Net Operating Debt to Equity of 1.00x
  • Reported EPS of THB 0.14

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical producer, reported improved quarterly earnings as headwinds continue to ease from the previous quarter’s peaks, although still below normalized levels. The company continues to focus on enhancing its global competitiveness as the full benefit of China’s reopening spurs volumes through the year, and as volatile energy costs and the destocking trend by customers begin to normalize.

  • 1Q23 Performance Summary
  • Revenue of US$4B, an increase of 3% QoQ and a decline of 9% YoY
  • Reported EBITDA of US$301M, an increase of 269% QoQ and decrease of 62% YOY
  • Operating cash flows of US$201M
  • Net Operating Debt to Equity of 1.00x
  • Reported EPS of THB 0.14

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical producer, reported improved quarterly earnings as headwinds continue to ease from the previous quarter’s peaks, although still below normalized levels. The company continues to focus on enhancing its global competitiveness as the full benefit of China’s reopening spurs volumes through the year, and as volatile energy costs and the destocking trend by customers begin to normalize.

Indorama Ventures achieved Reported EBITDA of $301 million in 1Q23, an increase of 269% QoQ and a decline of 62% YoY. Sales volumes dropped 8% YoY amid the heavy destocking trend that is impacting the chemical industry globally, although volumes rose 5% QoQ as the pace of destocking begins to slow from the peak in 4Q22. With China reopening from pandemic lockdowns and economic activity increasing, there has been marginal improvement in benchmark spreads, albeit below historical levels. In Europe, the warmer-than-expected winter contributed to lower energy prices and alleviated the cost pressures faced last year.

The Group reported an overall decline in Q1 earnings on a year-on-year basis as continued destocking by customers kept sales volumes below consumer consumption levels. CPET posted Reported EBITDA of $142 million, a 74% decrease YoY as sales volumes dropped 9%. Fibers segment achieved Reported EBITDA of $32 million, a decrease of 69% YoY as all three verticals reported declining sales. Integrated Oxides and Derivatives (IOD) segment posted a 4.4% growth in YoY Reported EBITDA to $128 million as volumes rose 4.4% YoY.

Source:

Indorama Ventures Public Company Limited

Photo: EREMA/Wakolbinger
Manfred Hackl, CEO EREMA Group GmbH
28.04.2023

EREMA Group ends financial year 2022/23

Around EUR 355 million in overall turnover, 350 extruders delivered creating an additional recycling capacity for 1.6 million tons of recycled pellets as a result - these are the figures with which the EREMA Group was able to close the 2022/23 financial year in March.

"With demand for recycled plastics remaining high, the past financial year brought many challenges that we needed to handle," says Manfred Hackl, CEO of EREMA Group GmbH. The challenges included persistent delays in the supply chain and unexpected supplier outages. Logistics and production processes had to be adapted several times as a result. The situation has improved significantly meantime as a result of these measures and more stable supply chains.

Around EUR 355 million in overall turnover, 350 extruders delivered creating an additional recycling capacity for 1.6 million tons of recycled pellets as a result - these are the figures with which the EREMA Group was able to close the 2022/23 financial year in March.

"With demand for recycled plastics remaining high, the past financial year brought many challenges that we needed to handle," says Manfred Hackl, CEO of EREMA Group GmbH. The challenges included persistent delays in the supply chain and unexpected supplier outages. Logistics and production processes had to be adapted several times as a result. The situation has improved significantly meantime as a result of these measures and more stable supply chains.

The production locations in Austria manufactured 270 extruders and delivered them to customers around the globe. Taking the whole group into consideration, this figure rises to 350 including the extruders from PLASMAC, the Italian subsidiary. The recycled pellet production capacity of all extrusion systems delivered in financial year 2022/23 adds up to around 1.6 million tonnes per year. On top of that there are around 130 additional components and modules such as filter systems and ReFresher anti-odour units.

Recycling innovations for high-quality pellets
K 2022 - the highlight trade fair of the past financial year - saw the EREMA Group launch seven
new recycling systems and components. These included the new INTAREMA® TVEplus® DuaFil® Compact recycling system and the EcoGentle® plasticising unit, which was also newly developed. Thanks to their gentle polymer treatment and significantly lower melt temperature, both extrusion innovations deliver effective advantages in terms of the quality of the melt, recycled pellets, and final product, as well as impressive energy efficiency in post consumer and PET recycling applications. The significance of these innovations for plastics recycling is underlined by the nomination of the DuaFil® Compact technology for one of this year's Plastics Recycling Awards Europe in the category Recycling Machinery Innovation of the Year.
The same applies to the READYMAC 1109 TVE machine made to stock by EREMA Group subsidiary UMAC, as well as to the new ALPHA XS edge trim recycling machine for the inhouse recycling segment made by PLASMAC. The market launch of the deinking system presented at K 2022 by the EREMA Group company KEYCYCLE delivering a throughput of 1,200 kilograms per hour has been a success, as has the commissioning of a further unit sold to a film manufacturer.

40 years of EREMA
The beginning of the new financial year falls almost to the day on EREMA's 40th anniversary. On 14 April 1983, Helmut Bacher, Helmuth Schulz and Georg Wendelin founded EREMA Engineering Recycling Maschinen und Anlagen GesmbH, laying the foundation for the 40-year success story. In celebration, the comapny will hold the event EREMA Discovery Day at the company headquarters on the 1st of June. This event with live insights into the latest post consumer and PET recycling technologies will also see the official opening of the newly built research and development centre.

Source:

EREMA Group GmbH

14.04.2023

Carbios presents its 2022 Annual Results

Carbios, a compnay in the development and industrialization of biological technologies for reinventing the life cycle of plastics and textiles, announces its operating and financial results for the year 2022. The financial statements as of December 31, 2022, were approved by the Company’s Board of Directors at their meeting on April 5, 2023.

Carbios, a compnay in the development and industrialization of biological technologies for reinventing the life cycle of plastics and textiles, announces its operating and financial results for the year 2022. The financial statements as of December 31, 2022, were approved by the Company’s Board of Directors at their meeting on April 5, 2023.

  • Project to build, in France, the world’s first PET biorecycling plant: Progress in line with 2025 unit commissioning target6
  • Excellent results from the demonstration plant validating the industrial scale-up of Carbios technology
  • Carbios licensing documentation ready for worldwide industrial and commercial deployment
  • Long-term exclusive strategic partnership with Novozymes to ensure supply of enzymes at industrial scale for the Reference Unit and all future licensee plants
  • Creation of fiber-to-fiber consortium with On, Patagonia, Puma, PVH Corp., and Salomon
  • CE-PET research project successfully completed
  • Participation in WhiteCycle project co-funded by Horizon Europe and coordinated by Michelin
  • Publication of scientific articles in the prestigious Biophysical Journal and in Chemical Reviews
  • Carbios hosts world’s first PET Biorecycling Summit
  • Carbios publishes first Sustainability Report and outlines objectives for environmental, social and governance (ESG) initiatives
  • Carbios joins Ellen MacArthur Foundation’s circular economy network
  • €30 million European Investment Bank loan drawn down in 2022
  • Group’s cash position of €101 million as of December 31, 2022
More information:
Carbios plastics life cycle Recycling
Source:

Carbios

(c) Avgol by Indorama Ventures Limited
30.12.2022

Avgol® wins Procter & Gamble Supplier Excellence Award

Avgol®, an Indorama Ventures Limited company, has been honoured with the Supplier Excellence Award by leading global brand Procter & Gamble.

The award was in recognition of Avgol, a leader in the manufacture of high-performance nonwoven fabric solutions, ‘being a notable and valuable supplier over the last fiscal year’ to the P&G Baby Care Business Unit.

Avgol CEO Tommi Bjornman said receiving the honour from P&G for the first time is a source of great pride for the company. “The assessment process for the award focuses on us as the supplier showing outstanding contributions across a range of key categories,” he said. “I am delighted and proud that the Avgol team was unanimously identified as being strongest in terms of our collaboration with the customer, as well as in our continuous improvement efforts across all regions of P&G’s global Baby Care program.

“It was heartening that, in making the award, P&G further noted that Avgol’s efforts have significantly assisted in their own commercial growth during a challenging period for the Hygiene market,” he said.

Avgol®, an Indorama Ventures Limited company, has been honoured with the Supplier Excellence Award by leading global brand Procter & Gamble.

The award was in recognition of Avgol, a leader in the manufacture of high-performance nonwoven fabric solutions, ‘being a notable and valuable supplier over the last fiscal year’ to the P&G Baby Care Business Unit.

Avgol CEO Tommi Bjornman said receiving the honour from P&G for the first time is a source of great pride for the company. “The assessment process for the award focuses on us as the supplier showing outstanding contributions across a range of key categories,” he said. “I am delighted and proud that the Avgol team was unanimously identified as being strongest in terms of our collaboration with the customer, as well as in our continuous improvement efforts across all regions of P&G’s global Baby Care program.

“It was heartening that, in making the award, P&G further noted that Avgol’s efforts have significantly assisted in their own commercial growth during a challenging period for the Hygiene market,” he said.

In 2018, Indorama Ventures Limited (IVL), a leading petrochemicals producer and global integrated leader in PET and fibres, acquired majority ownership of Avgol, resulting in a focused and faster growth of Avgol Nonwovens.

“With the combined financial, technical, commercial strength and expertise of Avgol and IVL, Avgol has been working hard to develop innovative products, putting sustainability front and centre in our plans for the future and ensuring we deliver the very best product and service to our customers around the world,” said Tommi Bjornman.

 

Source:

Avgol by Indorama Ventures Limited / PHD Marketing Ltd

02.12.2022

Indorama Ventures signs ESG-Linked Revolving Credit Facility

Indorama Ventures Public Company Limited (IVL) has signed an ESG-Linked Revolving Credit Facility of €275 million with six syndicate banks, a further boost to the company’s long-standing commitment to sustainability-led corporate financing.

Tied to IVL’s ESG risk rating, the revolving credit facility’s pricing mechanism results in margin adjustments related to management score improvements across the Material ESG Issues as defined by independent sustainability and corporate governance research firms. The facility is available to IVL subsidiaries in Europe for two-years with the option to extend for one more year.

Indorama Ventures Public Company Limited (IVL) has signed an ESG-Linked Revolving Credit Facility of €275 million with six syndicate banks, a further boost to the company’s long-standing commitment to sustainability-led corporate financing.

Tied to IVL’s ESG risk rating, the revolving credit facility’s pricing mechanism results in margin adjustments related to management score improvements across the Material ESG Issues as defined by independent sustainability and corporate governance research firms. The facility is available to IVL subsidiaries in Europe for two-years with the option to extend for one more year.

The facility is part of IVL’s corporate financing strategy across a range of instruments linked to the company’s ESG and sustainability commitments. In November 2021, the company issued a THB 10 billion triple-tranche Sustainability-Linked Bond (SLB), the largest SLB issued in Thailand. IVL is on track to achieve its 2025 ESG goals. More ambitious 2030 targets include a 30% reduction in Scope 1 & 2 combined greenhouse gas (GHG) intensity, 15% reduction in energy intensity, 25% use of renewable electricity, 20% reduction in water intensity, 90% diversion of waste from landfill, recycle 1.5 million tons in PET bale input annually.

 

 

Source:

Indorama Ventures Public Company Limited

(c) Anthropics Technology
02.12.2022

Zyler wins Grosvenor Social Shopping Experience Challenge

Grosvenor, an international retail development and investment company, has launched a search for new technologies that promote innovation and create a social customer experience. A major aim of the challenge was to drive retail recovery in a post-pandemic world where bricks and mortar stores saw footfall slump. Zyler’s try-on solution impressed the judges and the companies will launch the technology with Grosvenor’s retail tenants.

Zyler’s patented technology allows customers to see themselves in any outfit with a head and shoulders photo and basic measurements virtually. For retailers, the try-on experience can be embedded into a website or existing app with only a small snippet of code needed.

Grosvenor, an international retail development and investment company, has launched a search for new technologies that promote innovation and create a social customer experience. A major aim of the challenge was to drive retail recovery in a post-pandemic world where bricks and mortar stores saw footfall slump. Zyler’s try-on solution impressed the judges and the companies will launch the technology with Grosvenor’s retail tenants.

Zyler’s patented technology allows customers to see themselves in any outfit with a head and shoulders photo and basic measurements virtually. For retailers, the try-on experience can be embedded into a website or existing app with only a small snippet of code needed.

Source:

Anthropics Technology

(c) Indorama Ventures Public Company Limited
22.11.2022

Indorama Ventures’ Deja™ brand named winner of the Best Sustainable Product Award

Indorama Ventures Public Company Limited (IVL) has been named winner of the Best Sustainable Product Award at the Chemical Week Sustainability Awards 2022. The award was for IVL’s DejaTM Carbon Neutral pellets, a carbon-neutral virgin polyethylene terephthalate (PET) resins, helping to reduce environmental impact.

The Deja™ brand covers carbon neutral virgin and recycled PET resins and a range of recycled PET (rPET) products, including flakes, resins, fibers, and yarns. It provides IVL’s global customers with a range of high-performance applications, including packaging, lifestyle, automotive, apparel, and medical equipment. The solutions help environmentally conscious companies meet their sustainability goals.

IVL has set ambitious 2025 and 2030 targets, which shall be met through its six-pronged decarbonization strategy, including energy transition, improving operational efficiency, circular feedstock, and future technologies. The company also has a goal to recycle 100 billion PET bottles annually by 2030.

Indorama Ventures Public Company Limited (IVL) has been named winner of the Best Sustainable Product Award at the Chemical Week Sustainability Awards 2022. The award was for IVL’s DejaTM Carbon Neutral pellets, a carbon-neutral virgin polyethylene terephthalate (PET) resins, helping to reduce environmental impact.

The Deja™ brand covers carbon neutral virgin and recycled PET resins and a range of recycled PET (rPET) products, including flakes, resins, fibers, and yarns. It provides IVL’s global customers with a range of high-performance applications, including packaging, lifestyle, automotive, apparel, and medical equipment. The solutions help environmentally conscious companies meet their sustainability goals.

IVL has set ambitious 2025 and 2030 targets, which shall be met through its six-pronged decarbonization strategy, including energy transition, improving operational efficiency, circular feedstock, and future technologies. The company also has a goal to recycle 100 billion PET bottles annually by 2030.

Chemical Week Sustainability Awards recognize the industry's best efforts in addressing financial, operational, and strategic challenges by focusing on ESG and sustainable product development. The awards were assessed by S&P Global, the world's leading credit rating agency, and a panel of experts from various companies across the chemical industry's value chain.

(c) Hologenix, LLC
18.11.2022

Hologenix® celebrates 20-year anniversary

Hologenix®, creators of CELLIANT®, began 20 years ago with the idea of improving the quality of people's lives and health with an emphasis on non-invasive, natural, holistic healing. Co-founder and CEO Seth Casden became fascinated with the effect infrared has on the body and worked with a dedicated team to develop and market CELLIANT® infrared technology and thus materials science innovator Hologenix came to be.

CELLIANT, a proprietary blend of IR-generating bioceramics that are ethically sourced, is a unique combination of nature and performance. CELLIANT captures and converts body heat into infrared energy for increased local circulation and cellular oxygenation, resulting in stronger performance, faster recovery and better sleep. It is a key ingredient in textiles, spanning both performance and fashion apparel, sleep and lounge wear, bedding, upholstery, uniforms and medical supplies.

Hologenix®, creators of CELLIANT®, began 20 years ago with the idea of improving the quality of people's lives and health with an emphasis on non-invasive, natural, holistic healing. Co-founder and CEO Seth Casden became fascinated with the effect infrared has on the body and worked with a dedicated team to develop and market CELLIANT® infrared technology and thus materials science innovator Hologenix came to be.

CELLIANT, a proprietary blend of IR-generating bioceramics that are ethically sourced, is a unique combination of nature and performance. CELLIANT captures and converts body heat into infrared energy for increased local circulation and cellular oxygenation, resulting in stronger performance, faster recovery and better sleep. It is a key ingredient in textiles, spanning both performance and fashion apparel, sleep and lounge wear, bedding, upholstery, uniforms and medical supplies.

The first partnership Hologenix secured was with the Ireland-based fiber company Wellman International Limited, a fully owned subsidiary of Indorama Ventures and a pioneer in recycling technologies. Hologenix still works with them today, a tribute to the company’s ability to form long-term partnerships with like-minded organizations, and their joint project of pure white CELLIANT rPET fiber was shortlisted for a prestigious Drapers Sustainable Fashion Award earlier in the year.

On the brand side, many of the first brands to incorporate CELLIANT were in the sportwear industry, including Adidas, Reebok, Saucony, Eastern Mountain Sports, Sierra Designs sleeping bags and Superfeet insoles.

In 20 years, Hologenix has achieved many scientific milestones, and CELLIANT has been and continues to be rigorously tested by a Science Advisory Board composed of experts in photobiology, nanotechnology, sleep medicine, and diabetes and wound care. The Science Advisory Board has overseen nine peer-reviewed published studies that demonstrate CELLIANT’s effectiveness and the benefits of infrared energy.

Looking ahead, Hologenix is continuing to research applications for CELLIANT in the agriculture industry and wound healing and diabetes. Expansion into the FemTech market with both product applications and scientific research about the benefits of infrared for women’s health issues is also on the horizon.

Source:

Hologenix, LLC / Sarah P. Fletcher Communications

08.11.2022

Ascend buys majority stake in recycler Circular Polymers

Ascend Performance Materials has purchased a majority stake in California-based Circular Polymers, a recycler of post-consumer, high-performance polymers including polyamide 6 and 66, polypropylene and polyester (PET). The deal provides Ascend with a consistent supply of high-quality PCR materials for its ReDefyne™ sustainable polyamides, launched at K 2022.

Circular Polymers, which as part of the deal is renamed Circular Polymers by Ascend, reclaims and processes post-consumer carpet via a unique technology and has redirected approximately 85 million pounds of waste from landfills into new goods since 2018.

“We are focused on helping our customers reach their sustainability goals and Circular Polymers by Ascend provides materials that offer strong performance with a considerably smaller environmental footprint, compared to other technologies like pyrolysis,” said Phil McDivitt, president and CEO of Ascend. “Since we launched ReDefyne, the demand for our circular products has been significant across all segments of our business, including automotive, consumer, electronics and high-performance fibers and textiles.”

Ascend Performance Materials has purchased a majority stake in California-based Circular Polymers, a recycler of post-consumer, high-performance polymers including polyamide 6 and 66, polypropylene and polyester (PET). The deal provides Ascend with a consistent supply of high-quality PCR materials for its ReDefyne™ sustainable polyamides, launched at K 2022.

Circular Polymers, which as part of the deal is renamed Circular Polymers by Ascend, reclaims and processes post-consumer carpet via a unique technology and has redirected approximately 85 million pounds of waste from landfills into new goods since 2018.

“We are focused on helping our customers reach their sustainability goals and Circular Polymers by Ascend provides materials that offer strong performance with a considerably smaller environmental footprint, compared to other technologies like pyrolysis,” said Phil McDivitt, president and CEO of Ascend. “Since we launched ReDefyne, the demand for our circular products has been significant across all segments of our business, including automotive, consumer, electronics and high-performance fibers and textiles.”

Ascend has a sustainability strategy based on three pillars: empowering people, innovating solutions and operating without compromise. Ascend has committed to reducing its greenhouse gas emissions by 80% by 2030 and recently announced two new efforts to reduce the carbon footprint of its products.

Source:

Ascend Performance Materials / EMG

Photo: EREMA
21.10.2022

EREMA: Circular economy for PET fibres

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

"With EREMA's VACUREMA® and INTAREMA® technology and PURE LOOP's ISEC evo technology, our company group already has an extensive range of machines for fibre and PET recycling applications. For ecologically and economically sound recycling, however, new technological solutions are needed to use the recycled fibres in higher-value end applications and to achieve a functioning circular economy," explains Wolfgang Hermann, Business Development Manager Application Fibres & Textiles, EREMA Group GmbH. The initial focus will be on PET, regarded as a key material for the production of synthetic fibres. The aim is to find recycling solutions that allow PET fibre materials to be prepared for reuse in PET fibre production processes. This is a significant step for the circular economy because PET fibres in textiles account for about two-thirds of the total volume of PET.

In this development work, the EREMA Group can build on existing know-how. Proven recycling technologies have been combined with a new IV optimiser. "This extends the residence time of the PET melt, which is particularly necessary in fibre recycling to efficiently remove spinning oils. Our recycling process also increases the IV value of the PET melt after extrusion back to the specific level that is essential for production of the fibre," explains Hermann. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

Fibre test centre with plant to test customers' materials
In order to accelerate development work, EREMA opened its own fibre test centre a few months ago, where a cross-company team is working on recycling solutions for fibre-to-fibre applications.

Source:

EREMA Gruppe