From the Sector

Reset
8 results
Robert van de Kerkhof (c) Karl Michalski
Robert van de Kerkhof
27.11.2023

Robert van de Kerkhof joins HeiQ’s Board of Directors

HeiQ announces the appointment of Robert van de Kerkhof as Non-Executive Director, with effect from 1 January 2024 to the board of HeiQ plc and as Chairman of the Environmental, Occupation, Health & Safety and Sustainability Committee. Robert will also be appointed to the board of HeiQ AeoniQ Holding AG (in Switzerland), a subsidiary of HeiQ plc.

Robert van de Kerkhof has over 30 years of experience in general management and sustainability leadership and extensive knowledge of the textiles industry, including cellulosic fiber technology. He founded PEPPER-i2, an advisory company specializing in sustainability and circularity. Robert also serves as the Chief Sustainability Officer and as a Board Member of Lenzing AG, a position he has held since 2014. Robert will be leaving Lenzing and its Board on the 31st. December 2023.

Robert joins HEIQ AeoniQ™ with the firm belief that the novel HEIQ AeoniQ™ man-made cellulosic fibers (MMCF) are one of the most promising solutions to transform the textile industry, now the second-most polluting in the world, into one of the most sustainable, by rendering fossil fuel-based fibers like polyester obsolete.

HeiQ announces the appointment of Robert van de Kerkhof as Non-Executive Director, with effect from 1 January 2024 to the board of HeiQ plc and as Chairman of the Environmental, Occupation, Health & Safety and Sustainability Committee. Robert will also be appointed to the board of HeiQ AeoniQ Holding AG (in Switzerland), a subsidiary of HeiQ plc.

Robert van de Kerkhof has over 30 years of experience in general management and sustainability leadership and extensive knowledge of the textiles industry, including cellulosic fiber technology. He founded PEPPER-i2, an advisory company specializing in sustainability and circularity. Robert also serves as the Chief Sustainability Officer and as a Board Member of Lenzing AG, a position he has held since 2014. Robert will be leaving Lenzing and its Board on the 31st. December 2023.

Robert joins HEIQ AeoniQ™ with the firm belief that the novel HEIQ AeoniQ™ man-made cellulosic fibers (MMCF) are one of the most promising solutions to transform the textile industry, now the second-most polluting in the world, into one of the most sustainable, by rendering fossil fuel-based fibers like polyester obsolete.

Robert has also held senior positions as President of the Austrian Fiber Institute, President and Board Member of CIRFS – the European Man-made Fibres Association, and Chairman of the ReHubs Business Council for Euratex, which is the voice of the European Apparel and Textile Industry.

Source:

HeiQ

IVL
03.08.2022

Winners of the RECO Sustainable Young Designer Competition

Indorama Ventures Public Company Limited (IVL) named the winners of ‘RECO Young Designer Competition’, Thailand's largest upcycling fashion design event, parading haute couture garments containing at least 60% recycled materials.

Eleven finalists showcased 33 handmade sustainable outfits at the 9th edition of the fashion show at IVL’s headquarters in Bangkok, using recycled PET and polyester items to craft creative fashions. Under the concept of ‘REVIVE: Start from the Street,’ RECO supports young Thai designers while raising awareness of recycling. The designs use a range of recycled materials including recycled PET yarns, discarded fabric from factories, and even repurposed safety belts.

Indorama Ventures Public Company Limited (IVL) named the winners of ‘RECO Young Designer Competition’, Thailand's largest upcycling fashion design event, parading haute couture garments containing at least 60% recycled materials.

Eleven finalists showcased 33 handmade sustainable outfits at the 9th edition of the fashion show at IVL’s headquarters in Bangkok, using recycled PET and polyester items to craft creative fashions. Under the concept of ‘REVIVE: Start from the Street,’ RECO supports young Thai designers while raising awareness of recycling. The designs use a range of recycled materials including recycled PET yarns, discarded fabric from factories, and even repurposed safety belts.

RECO awarded finalists and winners with 500,000 baht in prizes to support their careers. First prize of 125,000 baht was awarded to 23-year-old emerging furniture designer Prem Buachum for his ‘The Origin of Rebirth’ collection, using fabric recycled from post-consumer PET bottles. The first runner-up, Sathitkhun Boonmee, was awarded 75,000 baht for his ‘Remembering Your Favorite Teddy Bear’ collection, using old dolls made of polyester fibers. Second runners-up, Worameth Monthanom and Tanakorn Sritong, received 50,000 baht for their ‘Regeneration of Nature (into Spring)’ collection, using unused fabrics and discarded PET film. Napat Tansuwan, a finalist with his’ Don’t Judge’ collection, will go on to create designer merchandise for sponsor Buriram United Football Club using local weaving techniques from communities in Buriram province.

Mrs. Aradhana Lohia Sharma, Vice President at Indorama Ventures and RECO Young Designer Competition Chairperson, said, “Since 2011, RECO's ambition has been to uplift recycling and inspire people to realize the value of recyclable materials to produce great new products for daily life. We have witnessed many thoughtful initiatives on upcycling through the collections created by our talented young Thai designers. The designs this year showcase stunning wearability and innovation while using a large percentage of recycle materials. Public interest in recycling has been growing immensely, and we are grateful to strengthen the relationship with partners like Buriram United Football Club.”

“Indorama Ventures hopes this competition will be a driving force in nurturing sustainable fashion concepts and increasing the acceptance of recycled materials, especially post-consumer PET. We are proud to be a stepping-stone for our youth's design journey and our community’s sustainable future.”

Source:

IVL

19.07.2022

IVL: Corpus Christi Polymers plant in Texas resumes construction

Indorama Ventures Public Company Limited (IVL) announced that construction of an integrated PTA-PET plant in Corpus Christi, Texas, will resume in August this year. Corpus Christi Polymers LLC (CCP), a partnership between three companies, is expected to begin production in 2025 and ensure continued cost-competitive production to support the growth of IVL’s global PET operations into the next decade.

CCP was formed in 2018 as a joint venture between Indorama Ventures Corpus Christi Holdings LLC, a subsidiary of Indorama Ventures; DAK Americas LLC, a subsidiary of Alpek S.A.B. de C.V.; and APG Polytech USA Holdings, Inc, a subsidiary of Far Eastern New Century, following the purchase of a partially constructed facility of M&G Resins in Corpus Christi. Each partner will procure its own raw materials and receive one third of the PTA and PET produced at the facility to sell and distribute independently.

Indorama Ventures Public Company Limited (IVL) announced that construction of an integrated PTA-PET plant in Corpus Christi, Texas, will resume in August this year. Corpus Christi Polymers LLC (CCP), a partnership between three companies, is expected to begin production in 2025 and ensure continued cost-competitive production to support the growth of IVL’s global PET operations into the next decade.

CCP was formed in 2018 as a joint venture between Indorama Ventures Corpus Christi Holdings LLC, a subsidiary of Indorama Ventures; DAK Americas LLC, a subsidiary of Alpek S.A.B. de C.V.; and APG Polytech USA Holdings, Inc, a subsidiary of Far Eastern New Century, following the purchase of a partially constructed facility of M&G Resins in Corpus Christi. Each partner will procure its own raw materials and receive one third of the PTA and PET produced at the facility to sell and distribute independently.

Construction of the plant is resuming following a period of pandemic-related disruptions. Through the pandemic, the partners firmly resolved to continue planning amid continued robust demand for PET packaging and the need for shorter supply chains. As the impact of the pandemic eased in 2022, the management team was strengthened in preparation for the resumption in activities.

CCP is expected to be the largest vertically integrated PTA-PET production plant in the Americas, and IVL’s biggest greenfields project in the U.S. since the development of the AlphaPet production facility at Decatur, Alabama in 2009. The new Texas facility is a significant addition to IVL’s leading global footprint, and will expand its coverage to customers across the U.S. The plant’s vertical integration optimizes PTA-PET production and, together with the availability of raw materials Paraxylene and Mono Ethylene Glycol in the U.S., ensures long-term competitive-cost supply for IVL’s locally integrated polyester value chain.

The facility will have nominal annual capacities of 1.1 million metric tons of PET and 1.3 million metric tons of PTA, shared between the partners. It will employ three state-of-the-art technologies: PTA: IntegRex®, PET melt: Invista, and PET solid state: Easy Up (HCIRR – Horizontal Continuous slightly Inclined Rotary Reactor).

CCP is adding to its leadership team to prepare for the new growth opportunities. Mr Russell Wilson will leave his role with IVL as Head of Manufacturing Americas, Combined PET, to take up a new role as Chief Executive Officer of CCP from 18 July. He brings 30 years of Aromatics and PET leadership experience including prior roles with Amoco and BP before joining IVL. Mr Todd Hogue, IVL’s Global Head of EH&S, replaces Mr Wilson as IVL’s representative on CCP’s Board. Mr Michael Day joined CCP as Project Director in June and brings 34 years of construction leadership experience including senior roles with Bilfinger, KBR, and CB&I.  Mr Jeff Shea will assume the role of Chief Operating Officer on 18 July.  Mr Shea has been in the PET industry for the last 22 years and has managed PET sites for the last 17. 

Source:

Indorama Ventures Public Company Limited

Lenzing supports school competition on circular economy and climate protection (c) Lenzing
VCÖ BRG SolarCity Linz Gruppenfoto
22.06.2021

Lenzing supports school competition on circular economy and climate protection

  • Excellent project to encourage ingenuity among young students
  • Experiment on biodegradability of textiles and nonwovens produces impressive results
  • EUR 30,000 in prize money for a total of 209 participating schools in and outside Austria
  • Lenzing views supporting these kinds of projects as part of its sustainability mission

Lenzing – The Association of Chemistry Teachers in Austria – known by its German abbreviation, VCÖ – has been holding project competitions that thrill students and take them beyond the traditional syllabus for 30 years. Every two years, it highlights a key topic for ninth- and tenth-graders to explore by conducting special experiments and learning from their observations and conclusions.

  • Excellent project to encourage ingenuity among young students
  • Experiment on biodegradability of textiles and nonwovens produces impressive results
  • EUR 30,000 in prize money for a total of 209 participating schools in and outside Austria
  • Lenzing views supporting these kinds of projects as part of its sustainability mission

Lenzing – The Association of Chemistry Teachers in Austria – known by its German abbreviation, VCÖ – has been holding project competitions that thrill students and take them beyond the traditional syllabus for 30 years. Every two years, it highlights a key topic for ninth- and tenth-graders to explore by conducting special experiments and learning from their observations and conclusions.

This year, the 16th installment of the competition is called, “Achieving a cleaner climate and a circular economy with chemistry”. These topics are also near and dear to the heart of globally active fiber manufacturer Lenzing. That’s why the company promptly announced that it was prepared to support this project competition in several different ways. First, Lenzing made a contribution toward the sponsorship fund totaling EUR 30,000. Second, it initiated a special prize on biodegradability – a topic of growing importance given the huge challenges involved in reducing plastic waste. Finally, Lenzing placed a recognized expert at the students’ disposal to provide assistance and answer questions: Michaela Kogler, Project Manager Nonwovens & Technical Products.

Teaming up with rainworms

Two teams were tasked with biodegrading different fibers – just like those used to produce textiles and nonwovens – with the active participation of worms. Students at BRG solarCity in Linz buried fiber nonwovens, a basic material used in wet wipes and other products, in soil that was populated with numerous rainworms, while students at Vöcklabruck Junior High School for Sports and Integration layered textiles into a vermicomposting bin. Both experiments intended to determine the extent to which certain materials would biodegrade quickly. As it turned out, both projects showed that wood-based fibers, like those that Lenzing manufactures for the textile and nonwoven industry, break down very rapidly into natural constituents that swiftly pass into the soil. In contrast, fossil-based plastics such as polyester or polyethylene cannot be decomposed by worms or bacteria but remain in the soil, sometimes for hundreds of years.

The prizes for this year’s competition were awarded on June 11. The competition attracted entries from no fewer than 209 schools, including 11 from outside Austria. For more information on the projects and the winners, visit www.vcoe.or.at.

04.06.2021

Election of a new EPTA Board

During its members meeting of June 2nd, 2021, the European Pultrusion Technology Association (EPTA) elected a new board. All EPTA board members who stood for re-election have been confirmed again. Dr. Elmar Witten, Secretary of the EPTA, is happy about the continuity in the line-up of the EPTA board. "We will continue the current marketing activities to promote the pultrusion process," said Witten.

Thus, the board members for the next 4 years are:
Dr. Luigi Giamundo, ATP srl., Italy (Chairman)
Alfonso Branca, TOP GLASS, Italy
Dietmar Kühne, Ernst Kühne Kunststoffwerk, Germany
Sebastian Mehrtens, Fibrolux, Germany
Eric Moussiaux, Exel Composites, Belgium
Martin Zelinka, Owens Corning, France

Pultrusion is an important and continuously growing segment in the composites industry. It is a continuous manufacturing process of linear composite profiles made of polymeric resins such as polyesters and fiber reinforcement such as glass fibers. Automated Pultrusion Production Technology facilitates today's High Quality and Low-Cost demands by the market.

During its members meeting of June 2nd, 2021, the European Pultrusion Technology Association (EPTA) elected a new board. All EPTA board members who stood for re-election have been confirmed again. Dr. Elmar Witten, Secretary of the EPTA, is happy about the continuity in the line-up of the EPTA board. "We will continue the current marketing activities to promote the pultrusion process," said Witten.

Thus, the board members for the next 4 years are:
Dr. Luigi Giamundo, ATP srl., Italy (Chairman)
Alfonso Branca, TOP GLASS, Italy
Dietmar Kühne, Ernst Kühne Kunststoffwerk, Germany
Sebastian Mehrtens, Fibrolux, Germany
Eric Moussiaux, Exel Composites, Belgium
Martin Zelinka, Owens Corning, France

Pultrusion is an important and continuously growing segment in the composites industry. It is a continuous manufacturing process of linear composite profiles made of polymeric resins such as polyesters and fiber reinforcement such as glass fibers. Automated Pultrusion Production Technology facilitates today's High Quality and Low-Cost demands by the market.

Kooperation AMAC und FINNESTER (c) Finnester
Finnester’s innovative fire protection coatings in action
21.09.2020

Cooperation AMAC and FINNESTER

  • Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

  • Finnish coating and gelcoat manufacturer Finnester strengthens its activities in the D-A-CH region with AMAC

As of September 15th 2020, the Finland-based coating and gelcoat manufacturer Finnester Coatings Oy strengthens its activities in German speaking countries, the so-called D- A-CH region, comprising Germany, Austria and Switzerland with Dr. Michael Effing from AMAC.

Finnester is a pioneer in developing high-quality coatings and gelcoat for both urface spread as well as flame and thermal insulation of composite solutions in different fields of industries. Their portfolio comprises products based on Polyester coatings for fire and thermal protection as well as ceramifying polymers like HybridRED, compliant with the requirements of the standards e.g. EN45545-2. In
order to develop new business opportunities in the D-A-CH region for the endmarkets building and infrastructure, transportation, marine, industrial and electrical industries, Finnester is cooperating with AMAC to accelerate the process of locating suitable partnerships.

Ari Hokkanen, CEO of Finnester: “Finnester has developed unique high-quality coatings. The cooperation with AMAC will accelerate our growth ambitions and supports us in finding new business opportunities. We are happy to benefit from AMAC and Dr. Effing’s long-term experience as a pioneer in the composites industry and his high-quality network along the entire value chain.” Dr. Effing, CEO of AMAC GmbH confirms: “Fire-retardant coatings are very important to the composites industry in order to be successful especially in rail, fast ferry and building & infrastructure applications with their tough fire standards. The DACH region represents more than 30 % of the European market and is the key target for Finnester. I am looking forward to supporting Finnester with their unique offerings and connecting them with key players in the D-A-CH region.”

More information:
Finnester Coatings Oy AMAC
Source:

AMAC GmbH

Sustainable leadership for GtA with new Monforts Montex wide width lines (c) AWOL Media
GtA Managing Director Andreas Niess
27.07.2020

Sustainable leadership for GtA with new Monforts Montex wide width lines

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

Following the successful commissioning of two new Monforts Montex wide-width stenter lines and additional environmental management equipment at its plant in Germany, GtA – Society for Textile Equipment GmbH – is aiming to be the first textile finishing company to become entirely CO2-neutral in the manufacture of all of its products by 2025.

GtA is a partner company to Germany’s large-format digital printing fabric leader, Georg and Otto Friedrich GmbH, which has has this year been able to considerably expand its portfolio due to the new Monforts lines.

Headquartered in Gross-Zimmern, close to Frankfurt, Georg and Otto Friedrich GmbH and its partners in Germany have an annual production of 37 million square metres of warp knits for a range of end-use applications, including garments, automotive interiors and technical textiles, but increasingly with a concentration on digital printing substrates.

Fault-free textiles

A new standard in pure white, 100% clean and fault-free textile substrates has been demanded by this market in recent years due to the rapid growth in digitally-printed banners and billboards – often referred to as ‘soft signage’.

The substrates of choice for digital printing are 100% polyester warp knits which are resilient and allow excellent take-up of inks, and vibrant colours and clear and precise images to be achieved with digital printing techniques. The knitted construction also has the advantage of elasticity, which is a plus in terms of flexibility for installers.

Critically, the warp knitted fabrics have extremely smooth surfaces which is becoming increasingly important due to the general move away from PVC coatings which were the standard in the past.

It was to finish these fabrics for Georg and Otto Friedrich GmbH as well as providing such services for many other customers, that the GtA plant in Neresheim, Baden-Württemberg, was established in 2015.

The purpose-built plant on a greenfield site was initially equipped with a fully-automated, 72 metre long Monforts installation comprising a washing machine integrated with a 3.6 metre wide, seven-chamber Montex stenter. The line quickly went from single to double shift production and then to 24/7 operation  to meet demand.

Expanded widths

Building on the success of this installation, GtA has now installed two more Montex stenter lines – both in expanded working widths of 5.6 metres and purpose-built at Montex GmbH in Austria.

A six-chamber Montex unit is combined with a washing machine to guarantee the purity of the substrates, while a five-chamber line is integrated with a wide-width coating machine. This new coating capability at GtA has led to a number of new additions to the Georg and Otto Friedrich DecoTex range for digital printing, including wide width fabrics with flame retardant, antimicrobial and non-slip finishes.

The new Montex stenter lines benefit from all of the latest innovations from Monforts, including the Smart Sensor system for the optimised maintenance planning of key mechanical wear components on the stenters. A comprehensive overview of the condition of all parts at any time is now available for operators within the highly intuitive Qualitex visualization software.

With Qualitex, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

Environmental commitment

GtA is run by a seasoned team of textile professionals led by Managing Director Andreas Niess.

“We have received excellent service from Monforts from the outset and we were happy to place the order for these two new lines as part of our ongoing cooperation,” he says. “With all of the latest Monforts advances in technology we are fully in control of all production and quality parameters with these lines, as part of our significant commitment to innovative environmental technology.”

The GtA plant, which operates in near-cleanroom conditions, has also been equipped with proprietary technology to fully exploit the Monforts air-to-air heat recovery systems that are now standard with Montex stenters.

“Around 30 per cent of our investment volume at the site goes to energy-saving measures and we are sure that this commitment is worthwhile,” Mr Niess says. “As an example, our integrated heat recovery system fully exploits the waste heat from the process exhaust air and the burner exhaust gases of the Monforts stenters, allowing us to achieve an exhaust air temperature of  between 30 to 34°C, compared to what would conventionally be between 140 to 160°C. Another focus has been on exhaust air purification technology and here too, the latest technology has been installed with integrated heat recovery elements.”

This, he adds, saves 52% of the energy that would normally be used – equating to 5,800,000 KwH per year. The necessary audits for energy-efficient companies are also carried out annually.

In addition, GtA has purpose-designed the automatic chemical mixing and dosing systems that feed the padders for the key treatments that are carried out on the fabrics through the stenters.

The company is going further, however, in its pursuit of clean production and raw materials.

"We want to be an asset and not a burden on our immediate environment and therefore do not use any additives containing solvents," Mr Niess says. “We were the first to use fully halogen-free flame retardant chemistry, and we use bio-based, finely ground alumina products for the washing process instead of surfactants. PES polyester yarns made from recycled material are also increasingly used and the latest additions to our raw materials portfolio, the RC-Ocean products, are made from recycled sea plastic.

“We are now planning a combined heat and power plant for the production of electrical energy and heat and we will also build a photovoltaic system that converts solar radiation into electrical energy. GtA wants to be the first textile finishing company to be CO2-neutral in the manufacture of all of its products by 2025. The complete heat supply and heating for the 13,000 square metre production hall, as well as the office building and the hot water supply for the domestic water, is already energy-neutral. We are convinced that this commitment will pay off in the long term and our positive business development proves that sustainability and business profitability are perfectly compatible.”

In addition to the products for Georg and Otto Friedrich GmbH, GtA  offers its manufacturing capacities for other customers as a contract service.

All products are manufactured in accordance with Öko-Tex Standard 100, product class 1 and the company is also involved in the research and development of new sustainable manufacturing processes, in cooperation with many regional universities and funding project partners.

Source:

AWOL Media for A. Monforts Textilmaschinen GmbH & Co. KG

Primary Vittorio Segramora of San Gerardo Hospital with a nurse wearing one of the 1,800 donated gowns (c) GB Network
Primary Vittorio Segramora of San Gerardo Hospital with a nurse wearing one of the 1,800 donated gowns
29.04.2020

Call to action of the fashion world

  • Diana, Giusy, Simona and Marina. The call to action of the fashion world was born from four women engaged in the field of sustainability. On the occasion of Fashion Revolution Week, we tell you their story and the results achieved

A task force of Italian textile companies active in our area supported the first call to action launched at the fashion world by four women who have always been involved in the field of sustainability. The appeal launched on March 19th by the green journalist Diana de Marsanich, Giusy Bettoni, founder and CEO of C.L.A.S.S.

  • Diana, Giusy, Simona and Marina. The call to action of the fashion world was born from four women engaged in the field of sustainability. On the occasion of Fashion Revolution Week, we tell you their story and the results achieved

A task force of Italian textile companies active in our area supported the first call to action launched at the fashion world by four women who have always been involved in the field of sustainability. The appeal launched on March 19th by the green journalist Diana de Marsanich, Giusy Bettoni, founder and CEO of C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy)the eco multi-platform hub specialized in integrating a new generation of eco values into fashion, products and companies, Simona Roveda, Editorial Director and Director of Institutional Communication of LifeGate and Marina Spadafora, Italian Country Coordinator of Fashion Revolution and currently collaborating with Luxury Fashion Brands to implement responsible strategies in their companies have luaunched a call-to-action project which has brought together textile companies to manufacture PPE garments for the medical staff working in San Gerardo Hospital in Monza, near Milan.

The companies that answered the call-to-action are: Filo d’Oro, Mantero, ROICA™ by Asahi Kasei, C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy) e Zerobarracento, Iluna Group, Lg Electronics, Jimmy Lion, Personal Genomics, Isamar Holyday Village, Marcolin Eyewear, Maglificio Ripa.

During the last weeks the 4 women collected about 1,800 non-drip cotton and non-woven TNT gowns for sanitary use, about 400 protective masks for multipurpose washable, bacteriostatic, breathable and water-repellent prevention, 1,000 washable cotton surgical caps, 150 complete protective googles eye masks, two microwave ovens for hospital departments to offer support to medical and healthcare personnel by helping them in the few breaks during the grueling shifts of this period, a supply of samples of cotton socks, 300 cotton masks + polyester outer layer, water-repellent and antibacterial, and free weekly stays made available to doctors, nurses, civil protection personnel and families with related children involved in the Covid-19 pandemic.

Source:

GB Network Marketing Communications Srl