From the Sector

Reset
568 results
(c) Autoneum
16.06.2023

Autoneum: Sustainable sound absorption for underbody shields

Silence and resource efficiency are the order of the day in the development and optimization of electric vehicles. On the one hand, ever stricter emissions regulations worldwide are increasing demand for components that reduce noise pollution while helping vehicle manufacturers meet their sustainability targets. On the other hand, the absence of noise from the combustion engine in e-cars amplifies the disruptive effects of other noise sources in the passenger compartment. With Ultra-
Silent Tune, Autoneum now presents a new lightweight and environmentally friendly technology for underbody shields that reduces tire rolling noise both outside and inside the vehicle, thus improving not only acoustic performance but also driver comfort in electric cars.

Silence and resource efficiency are the order of the day in the development and optimization of electric vehicles. On the one hand, ever stricter emissions regulations worldwide are increasing demand for components that reduce noise pollution while helping vehicle manufacturers meet their sustainability targets. On the other hand, the absence of noise from the combustion engine in e-cars amplifies the disruptive effects of other noise sources in the passenger compartment. With Ultra-
Silent Tune, Autoneum now presents a new lightweight and environmentally friendly technology for underbody shields that reduces tire rolling noise both outside and inside the vehicle, thus improving not only acoustic performance but also driver comfort in electric cars.

Autoneum's Ultra-Silent Tune technology owes its sound-absorbing performance to acoustic chambers of different shapes and sizes. The chambers are created by applying an embossed polyester foil to the side of the Ultra-Silent underbody shield facing away from the noise source: they capture the sound waves emitted by the car tires, modulate them according to their respective geometry and reflect them back onto the porous carrier material. Compared to conventional single-layer underbody shields, whose acoustic performance is mainly determined by the noise-reducing properties of the product side facing the tires, Ultra-Silent Tune exploits both sides of the component, which significantly improves its acoustic absorption. Autoneum thus makes innovative use of the proven concept of traditional chamber absorbers, reducing exterior tire rolling noise.

Moreover, Ultra-Silent Tune combines optimized acoustic performance with the sustainability benefits of Autoneum's Pure technology Ultra-Silent. In addition to the high proportion of recycled PET fibers, underbody shields made from Ultra-Silent Tune can be manufactured from 100% polyester and thus be fully recycled at the end of vehicle life. Furthermore, the thickness of the multilayer construction can be flexibly adapted to the packaging spaces of different vehicle models. Underbody shields made from Autoneum's new Ultra-Silent Tune technology are already in pre-development at various vehicle manufacturers in Europe.

Source:

Autoneum Management AG

12.06.2023

Circular Polymers by Ascend launches Cerene™

Nylon 6, nylon 6,6, polypropylene, PET and calcium carbonate are available through the company’s proprietary carpet recycling process

Circular Polymers by Ascend, a market-leading recycler of post-consumer carpet, today the launch of Cerene™, a line of recycled polymers and materials made from the company’s proprietary carpet reclaiming technology. Cerene is available as polyamide 6 and 66, PET, polypropylene and calcium carbonate as a consistent,
sustainable feedstock for many applications, including molding and compounding.
Recycling experts from Circular Polymers will be showcasing Cerene at Compounding World Expo on June 14-15 at the Messe Essen in Germany.

Ascend Performance Materials, a fully integrated producer of durable high-performance materials and the majority owner of Circular Polymers by Ascend, is known for its innovations in nylon 6,6. Cerene will continue that legacy with offerings in nylon 6,6 while also bringing to market recycled polymers such as nylon 6, PET and PP.

Nylon 6, nylon 6,6, polypropylene, PET and calcium carbonate are available through the company’s proprietary carpet recycling process

Circular Polymers by Ascend, a market-leading recycler of post-consumer carpet, today the launch of Cerene™, a line of recycled polymers and materials made from the company’s proprietary carpet reclaiming technology. Cerene is available as polyamide 6 and 66, PET, polypropylene and calcium carbonate as a consistent,
sustainable feedstock for many applications, including molding and compounding.
Recycling experts from Circular Polymers will be showcasing Cerene at Compounding World Expo on June 14-15 at the Messe Essen in Germany.

Ascend Performance Materials, a fully integrated producer of durable high-performance materials and the majority owner of Circular Polymers by Ascend, is known for its innovations in nylon 6,6. Cerene will continue that legacy with offerings in nylon 6,6 while also bringing to market recycled polymers such as nylon 6, PET and PP.

“Customers around the globe are seeking consistent and reliable post-consumer recycled materials,” said Maria Field, business director of Circular Polymers by Ascend. “Cerene is mechanically recycled using a process that minimizes our carbon footprint and environmental impact.”

Circular Polymers by Ascend converts post-consumer carpet into fiber and pellets. The company uses a proprietary process in its California-based facilities to achieve high efficiency in recycling, successfully providing a new life for virtually every component of the carpet and backing. The company has redirected 85 million pounds of carpet from landfills into new goods since 2018.

Source:

Circular Polymers by Ascend

09.06.2023

Archroma and COLOURizd™ collaborate to make fashion more sustainable

Archroma, a leader in specialty chemicals towards sustainable solutions, is teaming up with COLOURizd™, an innovator specializing in sustainable textile dyeing technologies, to set a new standard for the eco-friendlier production of sustainable textiles.

The new collaboration will enable fabric mills and brands to combine Archroma pigment coloration solutions with the COLOURizd™ QuantumCOLOUR™ yarn-coloring technology to produce high-quality, high-performance textiles with maximum consumer appeal and minimal environmental impact.

Conventional fiber-reactive methods of dyeing cellulosic and synthetic yarns are multi-step resource-intensive processes that use up to 95 liters of water per kilograms of colored yarn and discharge approximately 94 liters of effluent.

Archroma, a leader in specialty chemicals towards sustainable solutions, is teaming up with COLOURizd™, an innovator specializing in sustainable textile dyeing technologies, to set a new standard for the eco-friendlier production of sustainable textiles.

The new collaboration will enable fabric mills and brands to combine Archroma pigment coloration solutions with the COLOURizd™ QuantumCOLOUR™ yarn-coloring technology to produce high-quality, high-performance textiles with maximum consumer appeal and minimal environmental impact.

Conventional fiber-reactive methods of dyeing cellulosic and synthetic yarns are multi-step resource-intensive processes that use up to 95 liters of water per kilograms of colored yarn and discharge approximately 94 liters of effluent.

In contrast, the innovative QuantumCOLOUR™ process injects pigment and a binder directly into the yarn, using only 0.95 liters of water per kilograms of colored yarn while producing zero effluent. This represents an unprecedented reduction of 98% in water consumption alongside zero wastewater discharge, zero discharge of harmful chemicals, 73% decrease in carbon footprint and 50% reduction in energy use.*

With Archroma, textile manufacturers and apparel brands can add further value to the QuantumCOLOUR™ process with tailor-made system solutions, including JUST COLOR. This formaldehyde-free** pigment coloration system is based on Archroma’s revolutionary Printofix® pigment dispersions and Helizarin® binders to deliver exceptionally soft fabrics with high fastness and durability, while also enabling energy and chemical savings and higher productivity.

* As tested by Peterson Control Union
** Below limits of detection according to industry standard test methods

Source:

Archroma

(c) EREMA
Manfred Hackl, CEO EREMA Group and Markus Huber-Lindinger, Managing Director EREMA, open the EREMA Discovery Day 2023
09.06.2023

EREMA Discovery Day as meeting place for plastics and recycling industry

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

"This wide range of technologies is necessary because the recycling process each of our customers choose depends on the type of plastic, the level of contamination of the input material, and which product will be made using the recycled pellets. Following the expansion of our Ansfelden site and with the new site nearby in St. Marien, we can now demonstrate all these processes, carry out test runs with customers' material and focus on development work independently of our Customer Centre," says EREMA's Managing Director Markus Huber-Lindinger.

EREMA is driving forward research and development work in the company's new R&D Centre. Two halls with a total area of 1,550 square metres and a new office building offering space for 50 workplaces has been built. Here, the company bundles cross-departmental test machines and laboratory facilities for post consumer and inhouse recycling applications. R&D is decentralised at EREMA. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology - all with the aim of meeting customer requirements and achieving the highest possible quality of recycled pellets.  

On the evening before Discovery Day, EREMA celebrated its 40th anniversary together with customers and partners. A review covered the company's history - from the first workshop in a garage in 1983, to its position today as a innovation pioneer and one of the market leaders.

More information:
EREMA plastics Recycling
Source:

EREMA Group

(c) EREMA
07.06.2023

EREMA presents a new solution for PET fibre-to-fibre recycling

Following their entry into the fibres and textiles sector, as announced at K 2022, recycling machine manufacturer EREMA launches the INTAREMA® FibrePro:IV - which has been specially developed for PET fibre-to-fibre recycling - at ITMA in Milan from June 8 to 14. Thanks to its especially gentle material preparation and efficient removal of spinning oils, the rPET produced can be reused in proportions of up to 100 percent for the production of very fine fibres.

Following their entry into the fibres and textiles sector, as announced at K 2022, recycling machine manufacturer EREMA launches the INTAREMA® FibrePro:IV - which has been specially developed for PET fibre-to-fibre recycling - at ITMA in Milan from June 8 to 14. Thanks to its especially gentle material preparation and efficient removal of spinning oils, the rPET produced can be reused in proportions of up to 100 percent for the production of very fine fibres.

PET is regarded as a key material for the production of synthetic fibres. Around two thirds of the total volume of PET goes into the production of PET fibres for the textile industry. This highlights the importance of high-quality recycling solutions for the circular economy. By combining proven INTAREMA® technology with a new IV optimiser, EREMA succeeds in processing shredded PET fibre materials heavily contaminated by spinning oils in such a way that the finest fibres can be produced again from the recycled pellets. The system, which now joins EREMA's machine portfolio as the INTAREMA® FibrePro:IV, is characterised by a longer residence time of the PET melt. This is an essential factor for achieving high quality recycled pellets, as it allows the spinning oils and other additives used to improve the handling of the fibres during manufacturing to be removed more efficiently than in conventional PET recycling processes. Following extrusion, by polycondensation the intrinsic viscosity (IV) of the PET melt is increased in the new IV optimiser and under high vacuum to the precise level that is needed for fibre production. "Including filtration the output quality that we achieve with this recycling process is so high that ultra-fine fibres of up to 2 dtex can be produced using these rPET pellets, with an rPET content of 100 percent," says Markus Huber-Lindinger, Managing Director at EREMA. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

While the focus of the fibre and textiles application is currently still on PET fibre recycling, EREMA is committed to driving forward the recycling of mixed fibre materials from classic textile recycling collection in a next project phase. In order to accelerate development work, the EREMA Group opened its own fibre test centre, where a cross-company team is working on recycling solutions for fibre-to-fibre applications. The centre also operates a fully equipped and variable industrial-scale recycling plant. It includes the peripheral technology required and is available to customers for trials.

More information:
EREMA ITMA Fibers Recycling
Source:

EREMA Group

FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale © Foto: Indorama Ventures Fibers Germany GmbH / FIDIVI Tessitura Vergnano S.p.A./ Nabucco 6075 Reale
06.06.2023

Trevira CS at the Cruise Ship Interiors Design Expo Americas in Miami

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

Trevira CS is exhibiting for the first time at CSI Miami (Cruise Ship Interiors Design Expo Americas). Taking place on 6 – 7 June, 2023 at the Miami Beach Convention Center, CSI will bring together buyers and suppliers involved in cruise ship interiors, including interior designers, architects, outfitters, shipyards and suppliers.
 
On the Trevira CS stand, visitors can get an idea of the wide range of flame retardant fabrics suitable for use on board cruise ships. 53 fabrics from 20 Trevira CS customers will be on display that either have IMO certification and/or have been tested to the fire safety standards (FTP Code) required in the marine sector. Trevira CS fabrics are inherently flame retardant, meaning that their flame retardant properties cannot be washed out or lost through aging or use. This is due to the chemical structure of the polyester fiber: the flame retardant properties are firmly anchored in the fiber and cannot be altered by external influences. A surface-applied flame retardant finish is therefore not necessary.

In the marine sector, the demands placed on textiles are not only high in terms of fire protection, but also with regards to light resistance and durability. This is particularly true for textiles used in outdoor applications. These must be extremely robust, as they are exposed to moisture and sunlight. To meet these requirements, Trevira CS has launched a range of 30 new spun-dyed, UV-stable filament yarns. Besides color depth and durability, spun-dyed yarns offer another advantage: They are more sustainable because the fabrics made from them can be produced in a more environmentally friendly way than textiles that are dyed in one piece or consist of brightly colored yarns. In fabric production, a large share of resource consumption goes to the dyeing and finishing of fabrics as well as the use of chemicals and water. However, with spun-dyed yarns, these processing steps are unnecessary – the yarn immediately comes out of the spinneret in the desired color, reducing the products’ environmental impact.

The topic of sustainability is also taken up in other Trevira CS products. For example, Trevira CS fabrics are available in recycled versions. They consist of fiber and filament yarns obtained in different recycling processes. Filament yarns are produced using recycled PET bottles, they contain 50% post-consumer recycled material. Recycled fibers are obtained using an agglomeration plant and in further processing steps from residual pre-consumer waste from production. They consist of 100% recycled material (pre-consumer recycling). All flame retardant recycled Trevira® products are GRS (Global Recycled Standard) certified.
Fabrics made from these yarns are marked with the Trevira CS eco trademark. The prerequisite for this is a recycled content of at least 50%. Among the fabrics presented at the Trevira CS trade fair stand are 8 fabrics bearing the Trevira CS eco brand.

The long-term goal in developing sustainable products is undoubtedly to enter a circular economy. For this new path, an innovative Trevira CS product development was launched, producing flame retardant fibers and filament yarns from chemically recycled raw material. In this case, the basic raw material for the chemical recycling was PET bottles, but essentially it could be most any other PET recyclables, such as packaging material or even textiles. Chemical recycling involves depolymerization, a sequence of chemical reactions in which the polymer chains are broken down again into their original components, i. e. the monomers. In a further processing step, impurities are removed. Before the polymerization process is initiated, a small amount of MEG (mono ethylene glycol) is added.

The same technology used to produce the original (virgin) raw material for Trevira CS is also used here. The flame retardant modification is added during polymerization. In this way, the flame retardant properties are indelibly anchored in the polymer.

By recycling valuable materials such as packaging material, waste can be avoided. The raw material obtained from the recycling process is comparable to the original material can be used again in high-quality products.

Source:

Indorama Ventures Fibers Germany GmbH

06.06.2023

Hohenstein celebrates 30 years of accreditation

On June 9, Hohenstein celebrates World Accreditation Day (WAD2023) along with 30 years as an accredited testing laboratory. In 1993, Hohenstein’s first lab received official certification to test textile products competently, reliably and impartially according to internationally recognized standards. With the expansion of its testing business, the company, headquartered in Boennigheim, Germany, has since gained numerous other accreditations for its global laboratories.

"The accreditations give our customers confidence that we comply with the required quality control procedures," says Julia Seeberg, who as Head of Quality Management also oversees the regular monitoring of the laboratories by DAkkS, the Deutsche Akkreditierungsstelle. “Everything possible is done to ensure the integrity of the test results.” In addition to DAkks accreditations of the testing laboratories for textile technological, biological, chemical and physical tests, Hohenstein is accredited as a certification and inspection body. Hohenstein's 75 years of expertise in the testing business complement its accreditation and provide an important basis for its long-standing customer trust.

On June 9, Hohenstein celebrates World Accreditation Day (WAD2023) along with 30 years as an accredited testing laboratory. In 1993, Hohenstein’s first lab received official certification to test textile products competently, reliably and impartially according to internationally recognized standards. With the expansion of its testing business, the company, headquartered in Boennigheim, Germany, has since gained numerous other accreditations for its global laboratories.

"The accreditations give our customers confidence that we comply with the required quality control procedures," says Julia Seeberg, who as Head of Quality Management also oversees the regular monitoring of the laboratories by DAkkS, the Deutsche Akkreditierungsstelle. “Everything possible is done to ensure the integrity of the test results.” In addition to DAkks accreditations of the testing laboratories for textile technological, biological, chemical and physical tests, Hohenstein is accredited as a certification and inspection body. Hohenstein's 75 years of expertise in the testing business complement its accreditation and provide an important basis for its long-standing customer trust.

Hohenstein laboratories in China, Bangladesh, Hong Kong and India have accreditations from the respective national and international accreditation bodies. The labs celebrate World Accreditation Day by highlighting the importance of accredited laboratories for the product quality and sustainability. "The demands of suppliers and consumers have increased," Julia Seeberg also notes. “For manufacturers to remain credible, it is even more imperative to demonstrate compliance with defined and standardized quality criteria.”

The globally valid quality standard for testing and calibration laboratories is DIN EN ISO/IEC 17025. The standard specifies general requirements for the competence, impartiality and uniform working methods of laboratories that operate internationally. Accreditations in accordance with DIN EN ISO/IEC 17020 and 17065 exist for the inspection and certification bodies. In addition, Hohenstein is an accredited testing laboratory for medical devices, where biological, chemical and physical laboratory tests are carried out. These tests form the basis for conformity with the European Medical Device Regulation (MDR).

Source:

Hohenstein

(c) Freudenberg Performance Materials Holding GmbH
(From left) Dr. Frank Heislitz, CEO Freudenberg Performance Materials, Andrea Luzi, Mayor of Sant'Omero, Italy, Dr. Tilman Krauch, CTO Freudenberg Group, Christian Cavaletti, Head of Operations Freudenberg Performance Materials Apparel Italy, Jonathan Oh, Senior Vice President & General Manager Global Business Division Apparel, and Dr. Hannah Koeppen, Vice President & General Manager Freudenberg Performance Materials Apparel Europe.
02.06.2023

Freudenberg: New Competence Center for Apparel Interlinings in Italy

Freudenberg Performance Materials Apparel Europe (Freudenberg) has expanded its facility in Sant´Omero, Italy, into a competence center for finishing and coating apparel interlinings. The Competence Center was officially opened on May 26, 2023.

The Freudenberg team in Sant´Omero has over 35 years of expertise in the manufacture of high-quality interlinings for menswear: base materials produced at the site are finished and coated to customers’ specifications. With the new competence center, the facility will now focus on coating and finishing all nonwoven, woven and weft apparel interlinings in Freudenberg’s portfolio. Customers throughout Europe will enjoy the advantages of greater manufacturing flexibility and a more diverse product offering.

Freudenberg Performance Materials Apparel Europe (Freudenberg) has expanded its facility in Sant´Omero, Italy, into a competence center for finishing and coating apparel interlinings. The Competence Center was officially opened on May 26, 2023.

The Freudenberg team in Sant´Omero has over 35 years of expertise in the manufacture of high-quality interlinings for menswear: base materials produced at the site are finished and coated to customers’ specifications. With the new competence center, the facility will now focus on coating and finishing all nonwoven, woven and weft apparel interlinings in Freudenberg’s portfolio. Customers throughout Europe will enjoy the advantages of greater manufacturing flexibility and a more diverse product offering.

Freudenberg installed the necessary finishing and coating technology at the new competence center in Italy over the last few months, building a new production hall for this machinery and equipment. Until recently, the bulk of interlinings were coated and finished in Weinheim, Germany. The facility there will now operate as a further competence center specializing in the production of base materials for apparel interlinings.

In addition to establishing the competence center, Freudenberg has also improved logistics. A new central warehouse in Italy now supplies customers in Southern Europe. It complements the central warehouse in Germany that delivers goods to customers in Northern Europe. As a result, Freudenberg is shortening both delivery routes and delivery times.

Source:

Freudenberg Performance Materials Holding GmbH

02.06.2023

Carbios receives funding for PET biorecycling plant and R&D activities

Carbios will receive grants totaling €54 million from French State via France 2030 and Grand-Est Region to finance construction of world’s first PET biorecycling plant and accelerate R&D activities

Carbios announces that its project has been selected by the French State for funding of €30 million from the French State as part of the investment plan France 2030, and €12.5 million from the Grand-Est Region.  The implementation of this funding is conditional to the European Commission’s approval of the corresponding state aid scheme, followed by the conclusion of national aid agreements. As part of the national call for projects on “Plastics Recycling” operated by ADEME[1], Carbios’ project to finalize the industrialization of its unique PET biorecycling process has been selected. The reference plant in Longlaville in the Grand-Est region will be the world’s first PET biorecycling plant and is due for commissioning in 2025. This plant will make it possible to relocate to France the production of the two basic components of PET, PTA and MEG[2], both derived from the Carbios process.

Carbios will receive grants totaling €54 million from French State via France 2030 and Grand-Est Region to finance construction of world’s first PET biorecycling plant and accelerate R&D activities

Carbios announces that its project has been selected by the French State for funding of €30 million from the French State as part of the investment plan France 2030, and €12.5 million from the Grand-Est Region.  The implementation of this funding is conditional to the European Commission’s approval of the corresponding state aid scheme, followed by the conclusion of national aid agreements. As part of the national call for projects on “Plastics Recycling” operated by ADEME[1], Carbios’ project to finalize the industrialization of its unique PET biorecycling process has been selected. The reference plant in Longlaville in the Grand-Est region will be the world’s first PET biorecycling plant and is due for commissioning in 2025. This plant will make it possible to relocate to France the production of the two basic components of PET, PTA and MEG[2], both derived from the Carbios process.

Carbios also announces that it has been granted total funding of €11.4 million from the French State as part of France 2030, of which €8.2 million directly for Carbios (€5 million in repayable advances) and €3.2 million for its academic partners INRAE[3], INSA[4] and CNRS[5] via the TWB[6] and TBI[7] joint service and research units. This funding will enable to continue its research into the optimization and continuous improvement of Carbios’ enzymatic technologies.

The plant will secure the sales of the first volumes of recycled PET produced with Carbios’ technology, and to offer its partners recycled PET of the same quality as virgin PET. Once the necessary permits have been obtained, which should be granted by the end of 2023, in line with the announced start of construction before the end of the year, the plant is scheduled to be commissioned in 2025. This will be followed by a period of ramp-up to full capacity. The plant will have a nominal processing capacity of 50,000 tonnes of PET waste per year, equivalent to 2 billion bottles or 2.5 billion food trays.

Selection for funding by the French State through France 2030 and the Grand-Est Region complements the recent announcement of an exclusive, long-term partnership with Novozymes[8], a leader in enzyme production, one of the main aims is to ensure the supply of enzymes to Carbios’ Longlaville plant and future licensed plants. In addition, Carbios recently secured a first supply source for its future plant by winning part of the CITEO tender for the biorecycling of multilayer trays[9].


[1] The French Agency for Ecological Transition
[2] PTA = purified terephthalic acid; MEG = monoethylene glycol
[3] French National Research Institute for Agriculture, Food and the Environment
[4] French National Institute of Applied Sciences
[5] French National Center for Scientific Research
[6] Toulouse White Biotechnology – UMS INRAE 1337 / UAR CNRS 3582
[7] Toulouse Biotechnology Institute – UMR INSA/CNRS 5504 / UMR INSA/INRAE 792
[8] Cf. press release dated 12 January 2023
[9] Cf. press release published by Citeo dated 26 April 2023

More information:
Carbios biorecycling plastics France
Source:

Carbios

(c) wet-green GmbH
01.06.2023

wet-green GmbH earns USDA Certified Biobased Product Label

wet-green GmbH announced today that it has earned the U.S. Department of Agriculture (USDA) Certified Biobased Product Label for wet-green® OBE 1 tanning agent for Olivenleder®.

wet-green® OBE 1 is made of 100% biobased raw materials coming from by-products of olive growing, covered by a global patent. wet-green® OBE 1 is applied as a pre-tanning agent and replaces standard tanning technologies e.g. Chromium, Glutaraldehyde, Zeolites etc., is non-corrosive, metal-free, free of synthetic reactive tanning chemicals, formaldehyde-free, glutaraldehyde-free, bisphenol-free, syntan free, viscous, pumpable and pleasant smelling. wet-green® OBE 1 is the next generation vegetable tanning agent suitable for a wide range of leather articles and applied since many years in areas e.g. automotive, upholstery, garments, shoes and accessories.

The wet-green® tanning agent for Olivenleder® can now display a USDA label that highlights its percentage of biobased content. Third-party verification for a product's biobased content is administered through the USDA BioPreferred® Program, which strives to increase the development, purchase, and use of biobased
products.

wet-green GmbH announced today that it has earned the U.S. Department of Agriculture (USDA) Certified Biobased Product Label for wet-green® OBE 1 tanning agent for Olivenleder®.

wet-green® OBE 1 is made of 100% biobased raw materials coming from by-products of olive growing, covered by a global patent. wet-green® OBE 1 is applied as a pre-tanning agent and replaces standard tanning technologies e.g. Chromium, Glutaraldehyde, Zeolites etc., is non-corrosive, metal-free, free of synthetic reactive tanning chemicals, formaldehyde-free, glutaraldehyde-free, bisphenol-free, syntan free, viscous, pumpable and pleasant smelling. wet-green® OBE 1 is the next generation vegetable tanning agent suitable for a wide range of leather articles and applied since many years in areas e.g. automotive, upholstery, garments, shoes and accessories.

The wet-green® tanning agent for Olivenleder® can now display a USDA label that highlights its percentage of biobased content. Third-party verification for a product's biobased content is administered through the USDA BioPreferred® Program, which strives to increase the development, purchase, and use of biobased
products.

Biobased products help address climate change by offering renewable alternatives to petroleum-based products; sequester carbon dioxide, lowering the concentration of greenhouse gasses in the atmosphere that contribute to climate change; create and expand markets; are generally safer for people and the environment than their petroleum-based counterparts; and represent incredible technological advances and innovations.

More information:
wet-green GmbH Leather chemicals
Source:

wet-green GmbH

(c) VeriVide
31.05.2023

BTMA: VeriVide’s new UltraView booth

At ITMA 2023 in Milan from June 8-14, BTMA member VeriVide will introduce UltraView – its first all-LED light booth for achieving a new level of consistent and standardised colour assessment.

The company’s light booths and lighting cabinets are specified by major global retailers around the world, who rely on them for establishing and maintaining visual quality standards across their supply chains.

This is no easy feat, given the textile industry’s complex structure and the many process stages each individual garment undertakes from the designer’s desk to the finished garment on the retail shelf – often criss-crossing several continents during the journey.

Benefits
UltraView brings a range of sustainable new benefits to designers, mills and brands, and combined with VeriVide’s successful DigiEye system for non-contact colour measurement and digital imaging, can have a positive impact on a company’s bottom line, bringing savings in time, money and CO2 emissions.

At ITMA 2023 in Milan from June 8-14, BTMA member VeriVide will introduce UltraView – its first all-LED light booth for achieving a new level of consistent and standardised colour assessment.

The company’s light booths and lighting cabinets are specified by major global retailers around the world, who rely on them for establishing and maintaining visual quality standards across their supply chains.

This is no easy feat, given the textile industry’s complex structure and the many process stages each individual garment undertakes from the designer’s desk to the finished garment on the retail shelf – often criss-crossing several continents during the journey.

Benefits
UltraView brings a range of sustainable new benefits to designers, mills and brands, and combined with VeriVide’s successful DigiEye system for non-contact colour measurement and digital imaging, can have a positive impact on a company’s bottom line, bringing savings in time, money and CO2 emissions.

The new all-LED light booth meets all relevant international lighting and colour assessment standards. The UltraView incorporates the company’s A rated CIE D65 and CIE D50 artificial daylight light sources and includes multiple pre-set point of sale light sources while being fully tuneable for recalibration to the individual requirements of each customer. In the past, individual light booths have had to be dedicated to the stipulated settings of each specific customer’s switch sets. The rapid flexibility of UltraView, however, makes the need for multiple light booths a thing of the past.

It also eliminates the need for the regular bulb changes that were necessary with fluorescents, to provide significant energy savings.

As supply chains continue to move towards digitisation away from time-consuming and expensive physical sampling, a version of the UltraView, VisionView, is available with an internal monitor to enable physical samples to be compared with their digital versions, if required.

DigiEye
For non-contact colour measurement and digital imaging, VeriVide’s DigiEye collects and processes data that can be communicated and shared instantly, enabling manufacturers, producers and processors to speed up quality control, sustain product integrity and reduce waste.

DigiEye also overcomes the limitations of spectrophotometers, which are limited to products with a solid colour appearance and can only measure ‘average’ colour, assessing the limited area of the product exposed in the instrument’s aperture.

These limitations are further compounded if the product has any form of multi-coloured characteristics or appearance, an uneven or inconsistent surface, a colour area too small to be captured by the instrument or any sort of surface effect, such as carpet pile and the sheen of satin and silk.

(c) Hologenix
31.05.2023

CELLIANT® with REPREVE® wins third Consecutive Award

CELLIANT® with REPREVE®, introduced by Hologenix with global textile solutions provider UNIFI®, makers of REPREVE®, has been awarded a Top 5 Selection in the Accelerated Eco category of the Spring/Summer ISPO Textrends 2025 Awards.

Last fall CELLIANT with REPREVE was also awarded a Selection in the Fibers & Insulation Category of the ISPO Textrends Fall/Winter 2024/2025. In addition, in the spring the fiber was shortlisted in the Drapers Sustainable Fashion 2023 Awards in the Sustainable Textile Innovation category.

Twice a year, ISPO recognizes innovative fibers, fabrics and components that are used to manufacture sports apparel. Both companies are excited that this innovation, whereby CELLIANT infrared (IR) technology is embedded into REPREVE, a brand of recycled fiber, has achieved these honors. CELLIANT with REPREVE is a performance fiber made from recycled materials that have been enhanced with IR technology to provide wellness benefits to the consumer.  

CELLIANT® with REPREVE®, introduced by Hologenix with global textile solutions provider UNIFI®, makers of REPREVE®, has been awarded a Top 5 Selection in the Accelerated Eco category of the Spring/Summer ISPO Textrends 2025 Awards.

Last fall CELLIANT with REPREVE was also awarded a Selection in the Fibers & Insulation Category of the ISPO Textrends Fall/Winter 2024/2025. In addition, in the spring the fiber was shortlisted in the Drapers Sustainable Fashion 2023 Awards in the Sustainable Textile Innovation category.

Twice a year, ISPO recognizes innovative fibers, fabrics and components that are used to manufacture sports apparel. Both companies are excited that this innovation, whereby CELLIANT infrared (IR) technology is embedded into REPREVE, a brand of recycled fiber, has achieved these honors. CELLIANT with REPREVE is a performance fiber made from recycled materials that have been enhanced with IR technology to provide wellness benefits to the consumer.  

CELLIANT is a natural blend of IR-generating bioceramic minerals, which, when embedded into textiles, allows them to convert body heat into infrared energy, returning it to the body and temporarily increasing local circulation and cellular oxygenation. This aids in muscle recovery, increases endurance, and improves overall performance in healthy individuals, among other benefits.
 
REPREVE recycled performance fiber consists of high-quality fibers made from 100% recycled materials, including post-consumer plastic bottles and pre-consumer waste. It is also certified and traceable with UNIFI’s U TRUST® verification and FiberPrint™ technology, which provide assurance that the product comes from recycled materials. Compared to virgin fiber, REPREVE helps to offset the use of petroleum, conserving water and energy and emitting fewer greenhouse gasses.

This award marks the third year in a row that Hologenix has had its CELLIANT technology recognized in the ISPO Textrends Awards. CELLIANT in pure white was a Top Ten Winner in 2022. The prior year, CELLIANT Viscose was a Selection Winner as well. 

Source:

Hologenix, LLC

(c) Hohenstein
In May 2023, Markus Tiemann, Hohenstein Global Head of Retail, had the pleasure of handing over the first quality certificate of its kind to Bernd Brunssen, pictured here on the right, Head of Quality Assurance at Carstensen Import Export Handelsgesellschaft mbH.
31.05.2023

First Hohenstein Quality Label Tested Pet Supplies awarded

To ensure that our four-legged pets are looked after in terms of product safety, quality and durability of their cuddly blankets, cushions or favorite toys, the testing service provider Hohenstein has established its quality label Tested Pet Supplies. In May 2023, Markus Tiemann, Hohenstein Global Head of Retail, had the pleasure of handing over the first quality certificate of its kind to Bernd Brunssen, Head of Quality Assurance at Carstensen Import Export Handelsgesellschaft mbH, located near Hamburg.

The bar for quality products is set high at the globally networked importer and distributor, and the company accordingly commissioned product-testing with Hohenstein testing laboratory from its existing range of dog cushions, toys for dogs and cats, pet transport boxes and food balls for dogs and cats.

To ensure that our four-legged pets are looked after in terms of product safety, quality and durability of their cuddly blankets, cushions or favorite toys, the testing service provider Hohenstein has established its quality label Tested Pet Supplies. In May 2023, Markus Tiemann, Hohenstein Global Head of Retail, had the pleasure of handing over the first quality certificate of its kind to Bernd Brunssen, Head of Quality Assurance at Carstensen Import Export Handelsgesellschaft mbH, located near Hamburg.

The bar for quality products is set high at the globally networked importer and distributor, and the company accordingly commissioned product-testing with Hohenstein testing laboratory from its existing range of dog cushions, toys for dogs and cats, pet transport boxes and food balls for dogs and cats.

The label is designed for the entire range in pet supplies, from chew toys to pet beds, with special attention to the high requirements for textiles. It provides consumers with clear product information on product safety, quality and durability, and also offers pets and their owners security against unwanted residues of chemical substances. Markus Tiemann adds, "To ensure that our four-legged darlings feel completely at ease, we can, depending on the intended use also include additional tests for example chew resistance, scratch resistance, outdoor suitability, water repellency, waterproofness or air permeability and include these in the claim, alongside standard tests."

Source:

Hohenstein

(c) Beaulieu International Group
22.05.2023

B.I.G. Yarns launches Sustainable Yarns at Clerkenwell Design Week

B.I.G. Yarns unveils its new “SustainableYarns” platform, with Clerkenwell Design Week visitors the first to be invited to get on board and focus on what matters most for the design and manufacture of sustainable soft floorings.

The expert in polyamide (PA) 1 step 3 ply yarns offers a range of options for manufacturers to introduce sustainable yarns into carpet solutions and reach sustainability targets faster and more efficiently.

The Sustainable Yarns range creates opportunities to design with recycled content yarn (EqoCycle), to work with renewable resources (EqoBalance), and, following the launch of new polyamide 6 (PA6) EqoYarn at Clerkenwell Design Week, to also leverage the low-impact value chain.

New addition EqoYarn is a new low-impact PA6 carpet yarn based on the most recent innovations in polymer production, which enable yarn manufacturers to lower their carbon footprint by nearly 50% and give carpet manufacturers more options to reduce their impact.

B.I.G. Yarns unveils its new “SustainableYarns” platform, with Clerkenwell Design Week visitors the first to be invited to get on board and focus on what matters most for the design and manufacture of sustainable soft floorings.

The expert in polyamide (PA) 1 step 3 ply yarns offers a range of options for manufacturers to introduce sustainable yarns into carpet solutions and reach sustainability targets faster and more efficiently.

The Sustainable Yarns range creates opportunities to design with recycled content yarn (EqoCycle), to work with renewable resources (EqoBalance), and, following the launch of new polyamide 6 (PA6) EqoYarn at Clerkenwell Design Week, to also leverage the low-impact value chain.

New addition EqoYarn is a new low-impact PA6 carpet yarn based on the most recent innovations in polymer production, which enable yarn manufacturers to lower their carbon footprint by nearly 50% and give carpet manufacturers more options to reduce their impact.

For its EqoYarn Bulk Continuous Filament (BCF) production process, B.I.G. Yarns has selected the few best-in-class partners that have made major steps forward in terms of sustainability, and reduced their greenhouse gas emissions thanks to continuous investments in process efficiency, green energy, heat optimization and waste reduction. The result is EqoYarn with a carbon footprint of 4 kg CO2 eq/kg yarns, which is a CO2 reduction of up to 50% compared to conventional PA yarns.

EqoBalance PA6 yarns enable customers to reach an even higher CO2 reduction of up to 75%. Manufactured with polymers made from renewable resources such as organic waste from cooking oil instead of virgin or fossil feedstock, these yarns have a carbon footprint of 1.98 kg CO2 eq./ kg yarns. They help carpet manufacturers to create products with an extremely low carbon footprint.

EqoCycle PA6 yarns are fully recyclable and incorporate 75% recycled content originating from recycled and regenerated PA6 granules. With a carbon footprint of 4.64 kg CO2 eq./ kg yarns, they deliver the same high-quality performance of virgin PA6 yarn with the benefit of 37% CO2 reduction. EqoCycle yarns offer carpet manufacturers a sustainable alternative to help reduce the ecological footprint of their products and move towards a circular economy without jeopardizing the end-product quality.

In addition to the different CO2-reducing options, B.I.G. Yarns’ customers can access an unlimited colour range to elevate their designs. Its BCF technology for polyamide yarns, twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex, along with its colour studio, are available to support their creation of customised collections.

Source:

Beaulieu International Group

Foto: BekaertDeslee/HeiQ
BekaertDeslee receiving the "High Product Quality" Interzum Award
18.05.2023

BekaertDeslee's Purotex+ with HeiQ Allergen Tech wins Interzum Award

HeiQ announces that its HeiQ Allergen* Tech has powered the award-winning product, Purotex+ from BekaertDeslee. The innovative solution for mattress ticking won the Interzum Award in the category "High Product Quality", being one of the six prizes given to BekaertDeslee.

Purotex+ powered by HeiQ Allergen* Tech is a solution for reducing exposure to allergens in bedding. The technology uses active probiotics to reduce exposure to allergens, including house dust mite matter, and pet allergens. HeiQ Allergen* Tech has received the Seal of Approval by Allergy UK, and independent testing has shown that it reduces exposure to inanimate allergens by up to 96.6%, making it a highly effective solution for allergy sufferers.

The Interzum Award recognizes exceptional design and innovation in the furniture production industry. Purotex+ was selected for the award from a field of 280 submissions from 25 countries. The jury praised the product's design, innovative features, and its contribution to improving the quality of life for people with allergies.

*Inanimate allergens such as house dust mite matter & pet allergens.

HeiQ announces that its HeiQ Allergen* Tech has powered the award-winning product, Purotex+ from BekaertDeslee. The innovative solution for mattress ticking won the Interzum Award in the category "High Product Quality", being one of the six prizes given to BekaertDeslee.

Purotex+ powered by HeiQ Allergen* Tech is a solution for reducing exposure to allergens in bedding. The technology uses active probiotics to reduce exposure to allergens, including house dust mite matter, and pet allergens. HeiQ Allergen* Tech has received the Seal of Approval by Allergy UK, and independent testing has shown that it reduces exposure to inanimate allergens by up to 96.6%, making it a highly effective solution for allergy sufferers.

The Interzum Award recognizes exceptional design and innovation in the furniture production industry. Purotex+ was selected for the award from a field of 280 submissions from 25 countries. The jury praised the product's design, innovative features, and its contribution to improving the quality of life for people with allergies.

*Inanimate allergens such as house dust mite matter & pet allergens.

Source:

HeiQ 

(c) Freudenberg Performance Materials Holding GmbH
Judith Marquant from fashion school Esmod in Paris during the presentation of her winning design
17.05.2023

Freudenberg Performance Materials Apparel: Winners of "Fashioning Sustainability"

A total of 20 European fashion and design schools took part in the 2nd “Fashioning Sustainability” competition organized by Freudenberg Performance Materials together with Macpi and Bemberg™ by Asahi Kasei, two co-branding partners in the textile industry.

Freudenberg invited talented young designers to create and submit their ideas for sustainable clothing. The initiative aims to show that sustainability is a key factor in the fashion industry.

Two of the most innovative outfits from each school were selected for the final round and presented to an international jury at the “Bagni Misteriosi” event location in Milan in May. Fashion design experts and opinion leaders as well as journalists were invited to select the most sustainable designs in the categories of “Technology” and “Design”.

A total of 20 European fashion and design schools took part in the 2nd “Fashioning Sustainability” competition organized by Freudenberg Performance Materials together with Macpi and Bemberg™ by Asahi Kasei, two co-branding partners in the textile industry.

Freudenberg invited talented young designers to create and submit their ideas for sustainable clothing. The initiative aims to show that sustainability is a key factor in the fashion industry.

Two of the most innovative outfits from each school were selected for the final round and presented to an international jury at the “Bagni Misteriosi” event location in Milan in May. Fashion design experts and opinion leaders as well as journalists were invited to select the most sustainable designs in the categories of “Technology” and “Design”.

The winners
First place in the “Technology” category went to Judith Marquant while the second to Jagoda Sokolowska, both students of the fashion school Esmod in Paris. Ilaria De Martino, from the fashion institute Modartech, Italy, and Xiaodan Liao from Polimoda, Italy, were awarded first and second place in the “Design” category. The first-place winners received €2,000, while the second places won €1,000.

All participants benefited from the platform to network with leading players in the garment industry and learn more about concrete steps for embracing sustainability. Creating true sustainability in the fashion industry means reducing the material flow of clothing, addressing both sustainable production and consumption.

Members of the Jury:
Cristiano Zanetti, Sales Director Italy, Freudenberg Performance Materials
Maurizio Cazzin, Male Modeller, Maison Giorgio Armani
Riccardo Bullio, Apparel Industrial Division Director, Dolce & Gabbana
Caterina Cuoghi, Industrial Director, Area NYC
Simone Bigi, Style and Product Office Manager FAY line, Gruppo TOD’S
Roberto Cibin, Model and Pattern Development Manager, Caruso
Bruno Landi, Sales Director, Vitale Barberis Canonico
Luisella Allegretti, Pattern Designer Boss MW Business Specialist, Hugo Boss
Eugenio Balordi, Product Manager, Maison Margiela
Ettore Pellegrini, Sales and Marketing Manager, Asahi Kasei Fibers Italia

Source:

Freudenberg Performance Materials Holding GmbH

(c) Groz-Beckert KG
12.05.2023

Groz-Beckert presents its innovations at ITMA

Groz-Beckert will be represented at ITMA with its six product sectors and will showcase its various innovations. The presentations at the booth will be supported by augmented reality applications. This allows visitors to discover the products both live and virtually.

The Knitting product sector will be represented at the Groz-Beckert stand with its four product groups circular knitting, flat knitting, legwear and warp knitting. In the circular knitting segment, for example, two newly developed knitting systems will be on show which have been realized in collaboration with machine manufacturers. The developments focus on energy savings, extended cleaning intervals and increased process reliability.

In addition to the machines for weaving preparation, the Weaving product sector will present its recently expanded portfolio of technical weaving reeds. The new weaving reeds make it possible to supply customers who produce fabrics with high densities. The weaving reeds are used in the production of special fabrics, for example, in technical filtration, membrane technology, solar cells or touch screens.

Groz-Beckert will be represented at ITMA with its six product sectors and will showcase its various innovations. The presentations at the booth will be supported by augmented reality applications. This allows visitors to discover the products both live and virtually.

The Knitting product sector will be represented at the Groz-Beckert stand with its four product groups circular knitting, flat knitting, legwear and warp knitting. In the circular knitting segment, for example, two newly developed knitting systems will be on show which have been realized in collaboration with machine manufacturers. The developments focus on energy savings, extended cleaning intervals and increased process reliability.

In addition to the machines for weaving preparation, the Weaving product sector will present its recently expanded portfolio of technical weaving reeds. The new weaving reeds make it possible to supply customers who produce fabrics with high densities. The weaving reeds are used in the production of special fabrics, for example, in technical filtration, membrane technology, solar cells or touch screens.

Products and services for classic needling and hydroentanglement will be presented by the Felting (Nonwovens) product area. In the field of felting needles, visitors can look forward to two innovations: a new notch shape and the Groz-Beckert felting needle module. In the felting needle module, the needles are embedded as a module in a plastic mold for the first time. The needle modules are characterized by high deformation resistance and offer new dimensions in needle density.

For the production of tufted floor coverings such as carpets, bath mats or artificial turf, the Tufting product sector will be presenting its proven Gauge Part system.

Various new and further developments will also be shown by the Carding product area. For those interested in the nonwovens industry, for example, the world's finest Interlocking wire for reduced risk of crashis included. For customers of the spinning industry, the division will be presenting further developed stationary flats and revolving tops. The new revolving tops have been adapted to the processing of fine yarns, while the stationary flats have been provided with a new, resistant aluminum profile.

The Sewing product sector is focusing on the presentation of its special application needles, SANTM. The sewing machine needles of the SANTM series have been specially developed for demanding sewing operations – e.g. for sewing technical or finest textiles. The division will also be presenting its new Needle Finder. The Needle Finder is an interactive tool in the online customer portal that helps customers select the right needle.

Source:

Groz-Beckert KG

10.05.2023

Indorama Ventures reports improved quarterly earnings

  • 1Q23 Performance Summary
  • Revenue of US$4B, an increase of 3% QoQ and a decline of 9% YoY
  • Reported EBITDA of US$301M, an increase of 269% QoQ and decrease of 62% YOY
  • Operating cash flows of US$201M
  • Net Operating Debt to Equity of 1.00x
  • Reported EPS of THB 0.14

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical producer, reported improved quarterly earnings as headwinds continue to ease from the previous quarter’s peaks, although still below normalized levels. The company continues to focus on enhancing its global competitiveness as the full benefit of China’s reopening spurs volumes through the year, and as volatile energy costs and the destocking trend by customers begin to normalize.

  • 1Q23 Performance Summary
  • Revenue of US$4B, an increase of 3% QoQ and a decline of 9% YoY
  • Reported EBITDA of US$301M, an increase of 269% QoQ and decrease of 62% YOY
  • Operating cash flows of US$201M
  • Net Operating Debt to Equity of 1.00x
  • Reported EPS of THB 0.14

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical producer, reported improved quarterly earnings as headwinds continue to ease from the previous quarter’s peaks, although still below normalized levels. The company continues to focus on enhancing its global competitiveness as the full benefit of China’s reopening spurs volumes through the year, and as volatile energy costs and the destocking trend by customers begin to normalize.

Indorama Ventures achieved Reported EBITDA of $301 million in 1Q23, an increase of 269% QoQ and a decline of 62% YoY. Sales volumes dropped 8% YoY amid the heavy destocking trend that is impacting the chemical industry globally, although volumes rose 5% QoQ as the pace of destocking begins to slow from the peak in 4Q22. With China reopening from pandemic lockdowns and economic activity increasing, there has been marginal improvement in benchmark spreads, albeit below historical levels. In Europe, the warmer-than-expected winter contributed to lower energy prices and alleviated the cost pressures faced last year.

The Group reported an overall decline in Q1 earnings on a year-on-year basis as continued destocking by customers kept sales volumes below consumer consumption levels. CPET posted Reported EBITDA of $142 million, a 74% decrease YoY as sales volumes dropped 9%. Fibers segment achieved Reported EBITDA of $32 million, a decrease of 69% YoY as all three verticals reported declining sales. Integrated Oxides and Derivatives (IOD) segment posted a 4.4% growth in YoY Reported EBITDA to $128 million as volumes rose 4.4% YoY.

Source:

Indorama Ventures Public Company Limited

(c) Carbios
05.05.2023

Carbios accelerates enzyme optimization

  • Carbios has developed an ultra-high throughput microfluidic screening of PET-depolymerizing enzymes in partnership with the Paul Pascal Research Center[1], a joint research unit of the CNRS[2] and the University of Bordeaux
  • Microfluidics enables millions of enzymes to be screened in a day, compared with a few thousand a week with conventional technologies
  • Future polymers of interest will benefit from this acceleration of the R&D phase, enabling Carbios to develop its portfolio of innovations on different types of plastic more rapidly

Carbios has accelerated its enzyme screening process with a microfluidic technology developed in partnership with the Paul Pascal Research Centre (a joint research unit of the CNRS and the University of Bordeaux, which specializes in microfluidics). This technology enables the screening of millions of enzymes in just one day, speeding up the process to optimize enzymes breaking down PET.

  • Carbios has developed an ultra-high throughput microfluidic screening of PET-depolymerizing enzymes in partnership with the Paul Pascal Research Center[1], a joint research unit of the CNRS[2] and the University of Bordeaux
  • Microfluidics enables millions of enzymes to be screened in a day, compared with a few thousand a week with conventional technologies
  • Future polymers of interest will benefit from this acceleration of the R&D phase, enabling Carbios to develop its portfolio of innovations on different types of plastic more rapidly

Carbios has accelerated its enzyme screening process with a microfluidic technology developed in partnership with the Paul Pascal Research Centre (a joint research unit of the CNRS and the University of Bordeaux, which specializes in microfluidics). This technology enables the screening of millions of enzymes in just one day, speeding up the process to optimize enzymes breaking down PET. This competitive advantage enables Carbios to reduce the time between the R&D phase and the production of its proprietary enzymes, and therefore to develop concrete solutions to plastic pollution even faster.

Microfluidics
Microfluidics allows the production of devices handling very small amounts of liquid. Each droplet generated can be considered as an independent microreactor having a volume in the picoliter range (10-12 liters) and containing a particular enzyme whose PET depolymerization activity will be screened. These droplets move through analysis units the size of a microchip allowing ultra-high throughput screening of 150 enzymes per second.

Previously, conventional robotic systems allowed screening in microplate format with a volume in the milliliter range (10-3 liters) and with rates of around one enzyme per minute.

The use of microfluidics to screen for more efficient or new enzymes will become widely adopted in the coming years, therefore accelerating the development of bioprocessing. Currently used by Carbios for the development of its PET depolymerization process, microfluidics should be used to accelerate the development of new enzymes for other types of plastic such as polyamide.

Carbios researchers specialized in microfluidics
Microfluidic processes require special expertise. At present, two researchers at Carbios are dedicated to microfluidics and based in the cooperative laboratory with TBI[3] hosted by INSA[4] Toulouse.  Alexandra Tauzin, Researcher in Enzyme Engineering and Microfluidics, and Alexandre Gilles, Engineer specialized in robotics, work in partnership with the Paul Pascal Research Center.

[1] Centre de Recherche Paul Pascal (CRPP)
[2] Centre National de la Recherche Scientifique (CNRS) = National Center for Scientific Research
[3] Toulouse Biotechnology Institute
[4] National Institute of Applied Sciences

More information:
Carbios plastics Enzyme polymers
Source:

Carbios

05.05.2023

Indorama Ventures in Obernburg focuses on automotive sector and specialties

Indorama Ventures at the Obernburg site (Germany) will focus on the core markets of tires and automotive safety/airbags and specialties, as well as drive selected product innovations for application in new market segments. Accordingly, the company plans to adjust its capacity at the Obernburg site and cut around 80 of the current 620 total jobs by the end of the year in production and supporting functions.

Stefan Braun, Managing Director of Indorama Ventures at Industrie Center Obernburg, said, “Global competitive pressure in the man-made fibers industry continues. While our customers value us as one of their leading technology partners, particularly in the development and production of nylon yarns, the cost pressure in the production of individual polyester-based yarns has increased continuously in recent years. We are therefore convinced that we have made the right decision to focus on our core competencies to remain successful in the long term.”

The jobs cuts affect both production and administration and sales positions. Representatives of the company and the Works Council together informed employees about the situation on May 4.

Indorama Ventures at the Obernburg site (Germany) will focus on the core markets of tires and automotive safety/airbags and specialties, as well as drive selected product innovations for application in new market segments. Accordingly, the company plans to adjust its capacity at the Obernburg site and cut around 80 of the current 620 total jobs by the end of the year in production and supporting functions.

Stefan Braun, Managing Director of Indorama Ventures at Industrie Center Obernburg, said, “Global competitive pressure in the man-made fibers industry continues. While our customers value us as one of their leading technology partners, particularly in the development and production of nylon yarns, the cost pressure in the production of individual polyester-based yarns has increased continuously in recent years. We are therefore convinced that we have made the right decision to focus on our core competencies to remain successful in the long term.”

The jobs cuts affect both production and administration and sales positions. Representatives of the company and the Works Council together informed employees about the situation on May 4.

The aim is to make the adjustments as acceptable as possible. Braun added, “We are prepared to talk to employees who will reach retirement age soon and who wish to leave the company early.” The company and employee representatives will agree on suitable measures in the coming weeks.

Source:

Indorama Ventures Mobility Obernburg GmbH