From the Sector

• On October, 20th, 2020, the State Prize for Innovation was awarded to the Lenzing Group for their LENZING™ Web Technology.
• Lenzing thus received the highest award for particularly innovative achievements in Austria.

Lenzing – On Tuesday, October 20, 2020, the Lenzing Group was awarded the coveted “State Prize for Innovation”. Lenzing emerged as the winner with its project LENZING™ Web Technology and thus received the highest recognition for particularly innovative achievements in Austria. The novel process combines fiber and nonwovens production in only one step, setting new standards in terms of efficiency, circularity and ecological sustainability. Margarete Schramböck, Federal Minister for Digital and Economic Affairs, presented the award to Gert Kroner, Vice President Global Research & Development.

“This award is a great recognition of our work. Our goal is to grow continuously with sustainable innovations and to look beyond our fibers, to the needs of our customers and partners and to the needs of consumers worldwide. With the LENZING™ Web Technology we have created an exciting and promising solution for eco-friendly products in line with our corporate strategy sCore TEN and support consumers in their daily needs in a sustainable way”, says Stefan Doboczky, Chief Executive Officer of the Lenzing Group.

Biodegradable nonwovens for a clean environment

The pollution of the environment by plastics is one of the most urgent problems of our time. Every day, millions of hygiene products and wipes around the globe end up in garbage and sewage. Most of them consist of up to 80 percent polyester or other fossil, non-biodegradable materials and therefore pollute the environment. With the LENZING™ Web Technology, Lenzing has developed a patented technology to counter this problem: Sustainable and eco-friendly nonwovens are produced from the renewable raw material wood. These are not only plastic-free, they also score points for their particularly high environmental friendliness. “Thanks to a unique self-bonding mechanism, in which the filaments bond with each other during the spinning process, binders, which are found in many nonwovens, are no longer needed. As a result, the nonwovens produced with LENZING™ Web Technology are 100 percent biodegradable and do not pollute either humans or the environment”, says Gert Kroner, Vice President Global Research & Development of the Lenzing Group.

The Austrian State Prize for Innovation is awarded annually by the Federal Ministry for Digital and Economic Affairs to the most innovative Austrian company. In 2020, the competition took place for the 40th time.

The Cetex Institut gGmbH, the thermoPre ENGINEERING GmbH and The FilamentFactory GmbH cooperate in the development, production and marketing of novel hybrid materials. The cooperation agreement signed on October 2, 2020 in Chemnitz takes the collaboration to a new level. "We are pleased to be able to supply the hybrid rovings to the end user not only in an application-specific manner, but also to offer the engineering for subsequent component applications, including the prototyping of the FRP components," says Sebastian Nendel, Managing Director of Cetex.

Patented process for the production of hybrid rovings
In the last 3 years the Cetex Institute has developed a plant technology for the production of hybrid rovings. By means of the patented process, different material combinations can be produced according to customer specifications. Material combinations of reinforcing fibers (glass, basalt, carbon, aramid or high-strength polymer fibers) can be combined with matrix fibers (PP, PET, PA, PPS, PEEK), but also special combinations of different reinforcing fibers or the combination of reinforcing fibers with metal fibers. Advantages of the new hybrid roving are the torsion-free and completely stretched fiber layer and the associated optimal utilization of the properties of the reinforcing fibers, as well as a very good homogeneity, whereby excellent processing can be achieved in later process steps.

Series production as next step
The next goal is clearly defined: Under the agreement, the process is to be jointly developed further by the project partners and transferred to series production. These joint activities form the basis for many years of intensive cooperation in this new field.

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

"Reconnecting innovation in the textile & apparel value chain" is the motto of WTIN's virtual trade show. And Oerlikon intends to more than live up to this motto. With more than 50 active experts from sales, customer service and technology as well as partners from its international network of representatives, the Manmade Fibers segment of the Swiss Oerlikon Group will try to be represented around the clock. "It is an interesting experiment for all of us and we would like to see it succeed," explains André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs. "Our aim is to meet our existing customers again, make new contacts and see 'old friends' from the industry. We have prepared an attractive digital offer for them all. Those of you who missed our roller coaster ride in Barcelona last year can now enjoy the journey through time in peace and quiet from your home office on your digital tour of the fair. And, there are no more waiting times either," promises Wissenberg.

Factory know-how from a single source
From Melt to Yarn, Fibers and Nonwovens. From the polycondensation and the processing of PTA and MEG as well as the extrusion of, for example, recycled polyester chips all the way through to hundreds of thousands of packaged and stored or directly-delivered textured bobbins for a market within the textile industry worth billions. From the planning and construction of highly complex production plants to the engineering of large-scale plant projects and competent customer services. This business model runs like a red thread through the self-conception of the Manmade Fibers segment of the Swiss Oerlikon Group. The right partner, especially – but not exclusively – for newcomers to the textile industry. "With us they get everything they need for a successful business: Factory know-how from a single source. And that's what we would like to show our visitors at our virtual trade fair booth," says Wissenberg.

Singapore – As global interest in sustainable textile production continues to soar, mills that have adopted Huntsman Textile Effects’ all-in-one ERIOPON® E3-SAVE textile auxiliary for polyester processing, which launched one year ago, have collectively saved more than 130 million liters of water.

Demand for polyester fabric is being driven by seemingly insatiable consumer appetite for sportswear and athleisure clothing. Sales in the sector have been on an upward trend for several years and are even proving resilient amid Covid-19 market disruption. However, dyeing of polyester and its blends has traditionally been resource intensive, time consuming and costly.

Huntsman Textile Effects’ next-generation ERIOPON® E3-SAVE textile auxiliary was engineered to address these challenges. It eliminates the need for separate pre-scouring, allowing pre-scouring, dyeing and reduction clearing to be combined in a single bath. Mills that use ERIOPON® E3-SAVE can thus dramatically shorten the polyester dyeing process and save water, energy and cost.

“Our innovations aim to help mills improve their productivity and competitiveness while also contributing to the textile industry’s shift to more sustainable practices and a reduced environmental footprint,” said Kerim Oner, Global Marketing Manager, Huntsman Textile Effects. “With ERIOPON® E3-SAVE, we have harnessed the unparalleled technical expertise and application know-how of our research and field teams to develop a product that is proven to reduce costs for mills and that meets current and anticipated industry sustainability standards.”

Dae Young Textile Vietnam Co., Ltd, a forerunner in sustainable textile production in Asia, was an early adopter of the ERIOPON® technology. Results from bulk production show that ERIOPON® E3-SAVE has reduced process time by over 20 percent and water consumption by over 50 percent, delivering annual cost savings of up to 30 percent.

“ERIOPON® E3-SAVE delivers a combination of best-in-class performance and value. It allows us to have the shortest possible processing cycle, which is key for us to deal with increasing industry pressure for faster turnarounds,” Jeong Won Oh, General Manager, Dae Young Textile Vietnam, said. “Alongside dramatic time savings, we are also saving water, energy and ultimately cost. Huntsman’s best-in-class products and high level of technical support help keep businesses like us productive.”

This unique polymer technology of ERIOPON® E3-SAVE promotes controlled exhaustion to ensure right-first-time level dyeing. It extracts oil and oil-based impurities from the fiber during processing and displays a high affinity to disperse dyes, enabling the rapid removal of unfixed surface dyes from the fiber during reduction clearing. The technology also enhances reproducibility and improves wet- and rub-fastness.

ERIOPON® E3-SAVE saves time, water, energy and cost in polyester dyeing by combining pre-scouring, dyeing and reduction clearing in a single bath. An advanced multi-action dyeing auxiliary in the dyEvolutionTM range, it delivers environmental and economic sustainability.

Seit drei Jahren unterstützt das Mittelstand 4.0-Kompetenzzentrum Textil vernetzt erfolgreich kleine und mittlere Unternehmen beim Thema Digitalisierung. Knapp 50 Praxis-Projekte hat das Kompetenzzentrum umgesetzt und weit über 3 000 KMU mit seinen Angeboten erreicht. Vielen Unternehmen hat das Netzwerk bereits beim Sprung in die Zukunft geholfen, wie die Teilnehmer der dritten Fachtagung hautnah erleben konnten.

Es war die erste Online-Fachtagung. Gastgeber und Organisator war das Sächsische Textilforschungsinstitut e. V. (STFI) in Chemnitz mit dem Thema: „Textil neu denken: Wie Digitalisierung und KI die vernetzte Produktion ermöglichen“. Die Fachtagung stand ganz im Zeichen der vernetzten Produktion, der Digitalisierung und Automatisierung von Produktionsprozessen. So ging es beispielsweise um die durchgängige digitale Auftragsabwicklung. Oder darum, welche Vorteile Bilderkennung und Barcode bei der Lagerortbestimmung haben. Der Einsatz von Sensortechnik eignet sich zum Sammeln und Auswerten großer Datenmengen: So kann die Wartung von Maschinen vorausgesagt werden. Das spart Kosten und Arbeitskraft.

„Die Unternehmer haben sehr offen darüber geredet, vor welchen digitalen Herausforderungen sie standen, wie Textil vernetzt unterstützen konnte und welche weiteren Schritte geplant sind“, zieht Geschäftsführerin Anja Merker nach der Veranstaltung Bilanz. „Durch Corona hat die Digitalisierung einen Schub erfahren. KI-Anwendungen werden von unserem textilen Mittelstand bei den Textil vernetzt-Partnern zunehmend nachgefragt“, so Merker. Gerade unkonventionelle und KMU-orientierte Herangehensweisen sind es, die von den Unternehmern geschätzt werden, so die Quintessenz der Veranstaltung. „In unserem neu eröffneten EscapeROOM können Unternehmen spielerisch KI erleben“, resümiert Claudia Feith vom Textil vernetzt-Partner Hahn-Schickard.

An die Partner Deutsche Institute für Textil- und Faserforschung (DITF), Hahn-Schickard, Institut für Textiltechnik (ITA) der RWTH Aachen sowie Sächsisches Textilforschungsinstitut (STFI) unter Leitung des Gesamtverbandes textil+mode wenden sich kleine und mittlere Firmen aus Industrie und Handwerk. Die Unternehmer kommen dabei mit individuellen Fragestellungen auf Textil vernetzt zu und werden von den Projektpartnern bei der Digitalisierung unterstützt.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announces that Dyneema® is driving the performance of Team Sunweb’s protective cycling jerseys in the 2020 Tour de France. Together with its partners, Team Sunweb and Craft Sportswear, DSM has helped to deliver a jersey that, when combined with a protective baselayer, offers cyclists effective abrasion protection at speeds up to 60km/h, while also reducing the severity of open wounds at even higher speeds. In this way, DSM underlines its commitment to protect people and the environment they live in.

Professional cycling places its participants in considerable danger; in recent years, the Tour de France has averaged 1.5 crashes per stage, while crashes in one-day classics are even more frequent. Cycling jerseys can support riders by enabling protection for a large portion of the body, while allowing for moisture transport to the surface and offering low thermal resistance. However, cycling jerseys made with conventional materials offer limited protective performance.

To address these needs and enable a safer riding experience, DSM has teamed up with Craft Sportswear and Team Sunweb to develop a cycling jersey that offers much-needed increases in abrasion resistance without compromising the comfort or low weight that cyclists demand. The new jersey is the latest protective cycling apparel solution, following the launch of the protective bib shorts (2015) and the protective baselayer (2019). The jersey will be worn for the first time by Team Sunweb in this year’s Tour de France. When combined with the protective baselayer, the new jersey offers complete protection against abrasions up to 60km/h, a speed below which professional cyclists spend 95% of race time in a typical stage.

Dyneema® has been used to protect workers in high-stake industries for more than 30 years – and the expansion into fabrics means both professional and recreational cyclists can enjoy the intrinsic performance capabilities of Dyneema® in their protective garments without sacrificing wearer comfort.

“Being 15 times stronger than steel on a weight for weight basis, Dyneema® fiber offers an excellent solution to increasing the abrasion resistance of a fabric, reducing the severity of road rash in case of a crash, without compromising the rider weight or comfort,” states Piet Rooijakkers, Head of R&D Team Sunweb “What’s more, the new jersey can form part of a modular protection solution, where riders can easily take off or put on layers according to race and weather conditions. In this way, the new jersey will support our riders significantly in the Tour de France and beyond.”

“The new cycling jersey with Dyneema® will make a real difference to cyclists facing the dangers of professional competition, and help ensure the health of both people and the environment,” states Wilfrid Gambade, President DSM Protective Materials. “The jersey is physical proof of the great achievements collaboration with expert partners can deliver. Moving forward, we will work with Craft and Team Sunweb to integrate bio-based Dyneema® fibers into protective cycling jerseys – contributing even further to a safe and healthy world!”

In line with its commitment to protect people and the environment they live in, DSM introduced the world’s first-ever bio-based HMPE fiber in May 2020. Bio-based Dyneema® fiber offers the same exact performance as conventional Dyneema® with a carbon footprint that is 90% lower than generic HMPE. The continued partnership between DSM, Craft and Team Sunweb will not only provide innovative, lightweight solutions for cyclists, but also environmentally sustainable alternatives that contribute to a circular economy.

• Kettelhack GmbH – a German leader in the dyeing and finishing of monochrome fabrics for high-quality and durable workwear and bed linen – has this year retired its existing Monforts sanforizing line after 35 years of daily service, replacing it with a new one.

The first line was installed in 1985 during a decisive time for the company.

Taking the helm in the early 1980s, Jan Kettelhack – the current CEO, owner and great grandson of Heinrich Kettelhack who founded the company back in 1874 – made a number of decisions that have secured its success over the following decades.

In 1982 Kettelhack had to vacate its existing plant in the city of Rheine due to urban development restrictions and despite a general sense of crisis in the European textile industry at that time, opted to relocate and build a new highly automated plant that was not reliant on mechanical and personnel-intensive processes. This was aligned with a greater focus on competitive international sales.

From 1986, the company’s proficiency as a specialist in solid-colour textiles led to workwear textiles becoming a bedrock of the business. Continuous investments in machinery and technical equipment have resulted in a fully integrated and rationalised single source site dedicated solely to what the company does best – the expert dyeing and finishing of textiles.

Crucial process steps

These stages in the textile value-added chain, Jan Kettelhack has observed, are crucial to the quality of a final product in workwear – whether it stands the test in everyday use, how comfortable it is, and how many washes it can withstand.

Central to this is the sanforizing process, which pre-shrinks a fabric by compressing it prior to washing. This limits any residual or further shrinkage in a made-up finished garment to less than 1%, to ensure perfect comfort and fit over an extended lifetime.

“We certainly can’t complain about the performance of the old Monfortex sanforizing line which gave us so many uninterrupted years of service, but certain spare parts for it were becoming increasingly hard to source, the control unit was becoming a little unstable and we couldn’t risk potential interruptions to our production schedule,” says Kettelhack plant manager Hendrik Pleimann. “In many ways, the new Monfortex sanforizer is much the same as the old one in terms of its mechanical reliability and robust construction, but of course today’s drives are much more efficient, and when it comes to the automation features and control units – and the data we can generate and analyse for increasing efficiency – that’s a whole new world.”

Qualitex 800

The two-metres-wide Monfortex line benefits from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure.

The integrated Compactomat system allows a continuous indication and control of the shrinkage values and the temperatures of the shrinking cylinder and felt calender. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

Full line management can be optimised via the batch-specific calculation of all process material consumption and water and electricity use, with any standstill times analysed and immediately corrected for the future.

Any further assistance required is available via Monforts Teleservice, with direct connection to technicians and virtual access to machine analysis.

Professional

Commissioning of the new Monfortex line at Kettelhack commenced in January and it was fully operational in a relatively short time.

“This was a very professional installation provided by the Monforts team with whom we have a very good relationship dating back many years, and everyone knew what was required from both sides,” says Mr Pleimann. “Our operators have found the new line very user friendly and we are very pleased with how everything proceeded so smoothly. An unexpected benefit is that the new line is also a lot quieter, of course, which is something our operatives are appreciating.”

Key features of the Monfortex line are the proven fabric preparation, weft straightening and spreading units, prior to the compressive shrinkage machine with a 750mm shrinking cylinder, and a felt calender equipped with 2,000mm diameter drying cylinder. The line also features an integrated automatic grinding unit.

Customer service

Kettelhack is processing primarily cotton and polyester woven fabrics, with lyocell becoming increasingly popular in workwear for its softness and comfort.

As part of its customer service, the company stocks more than a million metres of grey fabric and at least 1.2 million metres of finished and rolled standard fabric in its warehouse at any one time, with a further 750,000 metres permanently in production.

While a significant cost, this commitment ensures Kettelhack customers can be fully flexible and rely on it as a partner.

“As a family-run company with around a hundred employees, Kettelhack operates very differently to bigger businesses which have to constantly consider their immediate quarterly profits,” Mr Pleimann concludes. “The thinking at Kettelhack is in terms of the next twenty years and ensuring that the business will be just as successful for the next generation as it is today. We also have a very flat organisational structure in which everyone is involved and takes an active part, which makes it a very nice place to work.”

• Italian creativity merges with Chinese technological innovation to create a new capsule collection
   

A new era is born in the world of denim, Paolo Gnutti and Advance Denim will combine their skills to create capsule collections for both the US and Asian markets.

These collections will combine Paolo Gnutti’s artistry and Advance denim’s technological innovation to create “magical” inspiration that is with the reach of all brands.

Advance Denim has the distinction of being the oldest denim manufacturer in China and has dedicated its efforts since day one around the core beliefs of innovation , service , quality and people. These core beliefs are the foundation of their day to day focus of becoming a world leader in denim. They are also  committed to making the most sustainable denim possible and they are constantly investing in the infrastructure and systems that will help them to reach aggressive sustainability goals . Sustainability is important but Advance Denim has always been true to denim and strive to produce innovative high-quality products that exceed the needs of the market

“We are looking forward to Paolo bringing his Italian artistic aesthetics to our denim.” Said Ms. Amy Wang, General Manager of ADVANCE DENIM. “ We believe it is the combination of eastern and western design and culture that have never been offered to our customers before and will take Advance Denim to a whole new level. It is our goal to also offer these high quality designs at a competitive price from our Vietnam facility.” conclude Ms. Wang.

Paolo Gnutti, a life time dedicated to denim innovation and creativity, bases the creation of his collections following  precise themes and  stylistic contaminations. He uses indigo bases which are completely transformed thanks to the use of flocks, 3D prints, colored foils and metallic effects.

Paolo Gnutti has the ability to conceive ground breaking fashion, thanks to his incredible creativity and visionary irreverent combination that ushers in a new concept of  fashionability to the denim world.

“ My passion and my professional exploration lead me to acquire the skill needed to develop unforgettable and unique textile concepts” said Paolo Gnutti “ I’m trilled to begin this collaboration with Advance Denim. I feel that we need a new challenge in our denim world, a new era of true globalization; we will create a capsule collection that will reach all customers, from premium to the mass market.”

A new era begins, based on the evolution of the  market and the search for innovation and inspiration that is both technically performance driven and accessible to all brands.

• Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
• With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

Making production versatility one of the cornerstones of its philosophy, Digitak has continued to invest in technology, as well as research and development its product portfolio. This forward-thinking approach has enabled the company to guarantee innovative, personalised products with meticulous attention to detail, with the highest – almost obsessive – standards of quality and maximum design flexibility. Over the years, the extensive experience gained by the company’s management in the field of sublimation with traditional and digital techniques, combined with their investment decisions have allowed Digitak to enhance its production performance, gradually implementing higher quality standards and differentiating itself from the competition in the complex and competitive sector of high fashion. An important feat, which has not, however, dampened its enthusiasm and willingness to continue growing and exceeding its goals. The company’s latest investment in a direct-to-fabric digital printing line with pigment ink propels the company into a new and promising production dimension.

Sublimation printing specialists

Since Digitak’s establishment, Filippo Taccani, the founder and current owner of the company, had set himself a clear and ambitious objective: “I wanted to take up the challenge of operating digitally - printing fabrics using this innovative technology to create products on a par with those  I had achieved with traditional sublimation textile printing methods during my previous work experience.”

The purchase of a Mimaki JV4 plotter, one of the first to be installed in Italy, marked the beginning of Digitak’s adventure. “To start the business, I needed a printing system that could operate with dispersed inks to print on polyester and I found the JV4 to be the best option,” explains Taccani. “It was an excellent decision, because I used these plotters to build the company and its success.”

The first Mimaki plotter was in fact followed by a second and a third. When it bought the fifth, the company moved to an industrial unit in Tradate (Varese) – Digitak’s current site – which now houses around fifteen Mimaki JV33 plotters, in addition to three Mimaki TS500-1800 wide-format sublimation printers, and a Mimaki TS300P-1800 high-speed sublimation printer. This Mimaki powered production facility – which is one of the company’s core strengths – was recently expanded with the addition of a Mimaki TX300P-1800B belt-type hybrid printing system, together with a Mimaki TR300-1850C textile coater and a Mimaki Tiger-1800.

“Naturally, over the years, we have also tested printing systems from other suppliers, but we have always returned to Mimaki. With high fashion as our key market, we need to guarantee our customers the highest levels of quality and, to date, we have never found solutions that beat the quality of this Japanese brand’s technology.”

According to Taccani, the difference lies in the “calligraphy” of Mimaki’s machines, that is the line of the ink on the fabric: “Unlike its competitors, Mimaki has focused on the ‘waveforms’, i.e. the electronics associated with the print heads. This attention paid to the way the ink jet is managed from the print head has allowed Mimaki to achieve unparalleled levels of accuracy, an aspect that has given my company a clear competitive edge.”

Moreover, at Digitak, quality comes before quantity: “We prefer to dedicate an extra day to production to guarantee the customer a final product that fully meets requirements and expectations. Mimaki’s technology not only suits this business model bult on top quality, but it crucially enables it.”

Operational and creative flexibility

Digitak currently prints around 2,000 linear metres of fabric per day. Its portfolio ranges from clothing and scarves, to beach and swimwear, with related personalised accessories, to sportswear, with technical properties such as breathability, comfort, resistance to external agents. The company have even added customised outdoor furniture to their offering of diverse and creative products.
The company’s machines operate continuously, 24/7. During the day, the machines are mainly used to develop and produce samples and colour proofs, while the actual production is carried out at night. “Thanks to our technology, we have developed an extraordinary operational flexibility. The fact that we have so many plotters allows us to work on multiple designs at the same time and to launch projects that are also very different from one another,” explains Taccani. “There are also some other crucial factors that have contributed, and continue to contribute, to increasing our production efficiency. The reliability of Mimaki’s solutions and the remote monitoring option offered is key. Once the standard start-up monitoring has been carried out and the machines are found to be printing correctly, we can let them work overnight without an operator. This is a great benefit for people who, like us, manage such a large and diverse fleet of machines.”

Digitak takes the same approach to customer service. Faced with an increasingly demanding market in terms of creativity, precision and completeness of service, the company wants to guarantee flexibility and customisation. “We decided to set up a department dedicated to the pre-press stage, in charge of preparing and checking the files supplied by customers. Seldom do our teams not need to do some editing of the files supplied, even if it’s only to make small changes that are essential for the print document to be as suitable as possible and to achieve the best final result.”

Technologies of the future

With a view to further enhancing production and customer service, Taccani has chosen to take on a new challenge, switching things up with some of the most recent investments.

While maintaining the focus on dye sublimation printing, Taccani has focused on technological diversification by installing a direct-to-fabric digital printing line. This consists of a Mimaki TX300P-1800B printing system with pigment inks and a TR300-1850C coater from Mimaki’s TR series. “The market continues to evolve and now requires even more flexibility regarding both processes and the fabrics supplied. This means that great opportunities exist for a print shop capable of simultaneously producing the same design – with minimal colour adjustment – on different fabrics, guaranteeing similar and accurate results. And this is precisely the path we are taking,” says Taccani. “Why have we opted for Mimaki again? Well, I had an opportunity to try out their new pigment inks and I immediately realised that they are a generation ahead of the other pigments available on the market. The cyan is very clean, the black is deep and there is a very interesting fullness of colour, suitable not only for furnishings, but also for other applications in the clothing sector.”

With its pigment inks, the new direct-to-fabric printing line allows Digitak to explore other related market segments. Thanks to the innovative automatic belt system, the TX300P-1800B guarantees good productivity and high-quality results. A standard of quality that is also boosted by the TR300-1850C fabric pre-treatment system: “This coater is essential for ensuring the best possible preparation of fabrics for printing. In fact, we are able to treat fabrics to make them suitable for the type of print they are intended for, sanitise them for specific applications and, in some cases, even dye them, with excellent quality.”

According to Taccani, another beneficial factor of direct-to-fabric pigment printing technology is the eco-sustainability of the process and its lower environmental impact. “We are proud to be able to offer our customers excellent printing results using little water and printing in ‘green mode’, with both the technologies we have available. I consider them winning technologies for the future, as both dye sublimation printing and direct-to-fabric printing with pigment inks use little water while mainly requiring the use of energy. Therefore, if you use renewable energy, then you’re done.”

Digitak’s other trump card is the Tiger-1800 installed in 2019. With this industrial printing system, the company aims to increase production volumes while maintaining its high-quality standards and further optimising costs. “We are excited to have these promising technologies available to us in-house. We are currently experimenting with these solutions, testing new opportunities and evaluating which paths to take to stay ahead of the game,” concludes Taccani.

• There is an urban legend that hemp canvas was used to make the very first pair of Levi’s jeans.
• While this is a myth that originated in the counterculture of the 1960s, hemp is without doubt the fibre of the moment for the denim industry.

At the second Kingpins24 virtual denim show that was broadcast from New York on June 23rd and 24th, the sustainable benefits of hemp fibre were referenced by many Monforts customers who are now including it in their collections, including AGI Denim, Artistic Milliners, Black Peony, Calik, Cone Denim, Naveena Denim Mills (NDM) and Orta.

“Hemp is an easy to grow fibre which requires no irrigation, no fertilizers, no herbicides and no chemicals,” says Allan Little, Director of Product Development for Cone Denim, which has recently launched its Sweet Leaf collection featuring the fibre. “Significantly, it also uses fifty per cent or even less water than cotton in cultivation.”

It can also bring some new aesthetics to denim too, he adds.

“Hemp has a unique colour and adds a different cast to our indigo, the drape and texture of the fabrics is different and it even adds  a bit of a unique hand, so combined with its sustainable credentials we are proud to be bringing the Sweet Leaf collection to the market.”

US supply chain

Cone is currently sourcing its hemp from France, but with much of its manufacturing now in Mexico – and with the introduction of the US Farm Bill in 2018 which has legalised the growing of legal hemp – is exploring the possibility of investing in the US supply chain.

“With US hemp we’re really at the R&D phase,” Little emphasises. “It’s a unique crop, so coming up with the right stalk to provide the right fibre is challenging. We’ve experimented with different types of seed and various methods of decortication.”

Decortication, he explains, is the mechanical removal of the outside layer of the hemp stalk to useable fibre on the inside. A second process, cottonization, is necessary to make the fibre suitable for spinning, because compared to cotton, hemp is longer, stiffer, and less flexible.

100% success

At the end of 2019, Naveena (NDM), headquartered in Karachi, introduced fabrics featuring up to 51% hemp content in blends with Tencel and recycled polyester and this year has developed the first 100% hemp denims.

“The response to the fabrics we showed last year was incredible and we were looking forward to the response to this latest development – which everyone was asking for – at the Kingpins show in Amsterdam, which unfortunately was unable to go ahead,” says NDM’s Director of Marketing Rashid Iqbal. “We produced initial samples in an undyed state because we were not sure how the wet spun yarn would react in the dyeing, but I’m happy to say we have had success in this respect and are now able to provide one hundred per cent indigo dyed hemp denim.”

Environmental benefits

“Differentiation is the key in the highly-competitive denim industry and we have assisted our customers with trials and optimised processing parameters for a range of different fibres, including hemp, both at our Advanced Technology Centre in Germany and at their own mills around the world,” says Hans Wroblowski, Monforts Head of Denim. “Given the environmental benefits of hemp, and the liberalisation of its cultivation in many parts of the world, the interest in it now comes as no surprise. We have the technologies and know-how to help our customers to fully maximise their hemp denims at all post-weaving stages of production.”

Monforts has a dominant position in the field of denim finishing with its well proven Montex stenters. It has been enjoying further recent success with its Eco Line concept based on two key technology advances – the Eco Applicator and the Thermo Stretch.

The latest Monforts innovation for denim is the CYD yarn dyeing system. This technology is based on the effective and established dyeing process for denim fabrics that is now being applied for yarn dyeing.

The CYD system also integrates new functions and processes into the weaving preparation processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – to increase quality, flexibility, economic viability and productivity. A full CYD line is now available for trials at the company’s Advanced Technology Centre.