From the Sector

When textiles are equipped with electronic components, conductive yarns and textile sensors, the application possibilities are almost unlimited. These high-tech textiles are a global growth market. In Stuttgart, manufacturers, users and researchers presented amazing examples of applications in construction, architecture and mobility. The appropriate standards ensure quality and safety.

In keeping with the themes of the event, participants were able to take a look behind the construction fence of the Stuttgart 21 rail project on the first day. After the tour, DITF board member Götz T. Gresser drew parallels with the market for smart textiles. Just like the completion of the underground station, the market potential for smart textiles is developing more slowly than predicted.

One important reason for this is that there is still a lot to be regulated. Standardization was therefore a key topic in the presentations on the second day of the event. Norms and standards create trust among users. They reduce the error rate in design and therefore development costs, helping to bring innovations and new technological developments into use. Kristina Müller from the German Institute for Standardization explained that consistent compliance with standards can reduce error costs in construction, for example, from the current estimated eleven percent to five percent per year. Jan Beringer from the Hohenstein Group used the example of actively illuminated high-visibility clothing to show the hurdles that need to be overcome on the way to standardization.

In addition to high-visibility equipment, workwear offers many opportunities for smart functions. Despite all safety precautions, accidents at work cannot always be avoided, explained Silke Rehm from Adresys. Smart clothing can then automatically make an emergency call and trigger an emergency shutdown of the machine.

There are suitable testing devices for monitoring and quality assurance of materials and textile surfaces. Stefan Fliescher from Textechno presented a device that has so far been exclusively used at the DITF.

The second block of presentations focused on mobility: examples included textile ideas for flight cabins of the future from Diehl Aviation, precise and therefore energy-saving heating systems for vehicles from Köstler and contactless sensor technology from Rotec, which detects when fiber ropes need to be replaced. Erhardt manufactures flexible, customized bodies for commercial vehicles They are particularly suitable for logistics in city centers and are equipped with textile sensors, for example for measuring temperature or determining the optimum load. The textile superstructures not only offer a textile surface for design, they can also communicate with their surroundings. Digital lettering shows when the vehicle is giving way or warns cyclists of blind spots when turning. Modules that are not required can be folded or rolled up to save space.

In the construction and architecture application area, solutions for climate change are in demand. TEC KNIT has developed smart shading systems made from “shape memory” polymer fibers that close or reopen depending on the temperature. Optigrün relies on smart rainwater management for greening buildings. Textile sensor technology ensures that the water is optimally distributed over the surface - digitally controlled according to the weather forecast. Michael Schneider from the Smart Textiles Hub showed how intelligent knitted fabrics installed on flat roofs detect moisture and temperature by contracting or expanding accordingly. This can also prevent damage caused by icing, for example. Christoph Riethmüller from the DITF explained that the actual state of buildings is constantly changing due to events. The charm of smart textiles is that they can adapt to these changes. In this way, it is possible to intervene before negative consequences become noticeable. This saves a lot of energy. For example, the targeted heating of walls depending on the relative humidity prevents the occurrence of mold with low energy consumption. Intelligent shading systems also ensure that rooms remain at a pleasant temperature in summer without air conditioning and that the heat remains in the room in winter.

The event was accompanied by an exhibition where participants were able to try out numerous smart products.

The annual User Forum is organized by the German Institutes of Textile and Fiber Research Denkendorf (DITF), the Textile Research Institute Thuringia-Vogtland e.V. (TITV Greiz) and the Forschungskuratorium Textil e. V. (FKT).

The next SMART TEXTILES User Forum will take place on March 4-5, 2026 in Zeulenroda.

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical producer, is preparing for a new era of growth under its IVL 2.0 strategy as it outlined a new approach to partnering with major industry peers, positioning the company to capitalize on significant expansion and consolidation opportunities unlocked by fundamental shifts in global chemical markets.

At the company’s annual Capital Markets Day in Bangkok, Mr. Aloke Lohia, Group CEO of Indorama Ventures, outlined the significant potential for Indorama Ventures—now revitalizing itself under its 3-year IVL 2.0 optimization plan—to resume its growth journey as it pivots towards a future that is being re-shaped by macroeconomic forces such as China’s push for self-sufficiency in manufacturing, the uneven impact of Peak Oil across East and West, and India’s rapid economic expansion. A few days ago, on 26 February, the company posted improved full-year 2024 EBITDA as its focused management executed their plan to transform the business through decisive ‘self-help’ actions amid one of the most severe industry downturns in recent years.

Mr. Lohia told an audience of analysts and investors, “Today, Indorama Ventures is a fitter company than we were when we announced our IVL 2.0 strategy a year ago, and we are now able to compete with the best. Our plan is designed not only to help us re-tool and re-skill to navigate the current downturn—which is expected to persist—but also to restore our historical growth trajectory. As an innately entrepreneurial family business with global scale and deep expertise, we have always been able to take advantage of change to grow our unmatched model and generate increasing shareholder returns. I am excited by new opportunities to substantially expand our business as our industry undergoes seismic, generational shifts and consequently unlocks fresh growth potential.”

IVL 2.0 Progress
At the event, senior executives provided updates on their measures under IVL 2.0 to fortify the business against prevailing market headwinds and set a new course for enhanced, sustainable earnings growth. In a year of alignment, mobilization and launch, all segments recorded improved performances in 2024 as they took concerted management steps to refine their organizations, optimize assets, and transform their business processes through modern data-led toolsets and digital enterprise systems.

Still, in light of continued industry pressures, the company fell short on its deleveraging and cash conversion targets in 2024 and has determined that further management actions are necessary to sustain progress toward the company's objectives, building on the significant measures already taken.

Strategic Growth Plan
Indorama Ventures, as a mature company with more than three decades of successful growth, is fundamentally changing its approach to generating increasing returns as it prepares a next generation of leaders to operate in a vastly different environment. In a departure from the company’s previous M&A-led model, Mr. Lohia outlined several expansion projects currently in the pipeline, all involving complementary strategic partnerships with major industry peers. This new growth approach aims to leverage Indorama Ventures’ unmatched organization, platform, processes, and systems—revitalized under IVL 2.0 and the company’s “indispensable chemistry” brand—to consolidate dominant positions and grow scale in attractive growth markets, including India.

In February, the company bought a minority stake of ~24.9% of EPL Limited, an Indian specialty packaging company and the largest global manufacturer of laminated tubes. The transformation that Indorama Ventures is undertaking under IVL 2.0 provides a critical springboard enabling the new partnerships-led growth model, Mr. Lohia explained.

In addition, Indorama Ventures is planning spin-offs of its Indovinya downstream chemicals segment and its Indovida packaging unit—as flagged a year ago—to enable them to achieve their potential as independent high-growth businesses.

Autoneum signed an agreement to acquire 70 percent of the shares of Jiangsu Huanyu Group, a leading automotive supplier for acoustic and thermal management in China. Business Group Asia is thus expanding its customer base to include major Chinese vehicle manufacturers such as BYD, BAIC and GAC, and will significantly increase its annual revenue. The transaction is scheduled to close in March 2025.

With around 30 million light vehicles produced annually, China is the world’s largest automotive market and, with an expected increase to 32.4 cars in 2030, it is also one of the most important growth markets for the automotive industry. Established in 2001, Jiangsu Huanyu Group is today one of China’s leading suppliers of lightweight components for light and commercial vehicles. The company operates 14 production facilities with around 1 100 employees in the immediate vicinity of local automotive manufacturers in the north, west and southeast of China.

Jiangsu Huanyu Group’s product portfolio includes components for the vehicle interior such as carpets, inner and outer dashes, headliners, trunk and interior trim, wheelhouse outer liners as well as insulation for the engine bay and the underbody. Jiangsu Huanyu Group also supplies commer-cial vehicle manufacturers in China, supporting Autoneum’s strategic initiative to grow its truck business in China. Synergies in the areas of technology and purchasing will also contribute to the further development of Business Group Asia. In the 2023 financial year, Jiangsu Huanyu Group generated revenue of around CHF 130 million and is recording strong growth in 2024. It is planned to continue operating the company under the Chinese company name.

The acquisition of Jiangsu Huanyu Group will be done in two phases. The closing of phase 1, the takeover of a majority stake of 70 percent at a purchase price of around CHF 75 million (excluding cash and cash equivalents and debt), is expected in March 2025 after approval by the authorities. As for the acquisition of the remaining 30 percent of the share capital, phase 2, Autoneum has a call option, which can be exercised in 2028. This two-phase approach binds both the current shareholders and the employees in key positions and allows Autoneum, together with Jiangsu Huanyu Group, to continue and further develop existing business activities smoothly.

“Jiangsu Huanyu Group has broad customer access to the largest local vehicle manufacturers in China. With its plants in the key automotive hubs in China, the company is an excellent strategic addition to Autoneum and brings us a significant step closer to our medium-term target of generating 20 percent of Group revenue in Asia,” explains Eelco Spoelder, Chief Executive Officer of Autoneum. “The acquisition of the majority stake in Jiangsu Huanyu Group will strengthen our position in China, the world’s largest and fastest-growing market, both in the light and commercial vehicle business. This step not only gives us access to an established customer base in China, but also allows us to further expand our presence and gain strong influence in the booming automotive hubs of Anhui and Shaanxi.”

The CEO of SGL Carbon SE, Dr. Torsten Derr, informed the Chairman of the Supervisory Board today that he will not extend his contract, which expires on May 31, 2025. Dr. Derr will continue his duties until the new CEO is appointed, at the latest until May 31, 2025.

“SGL Carbon is once again a strong and stable company whose profitable development I will continue to work on with all my strength until the last day. But even without me, my colleague on the Board of Management, Thomas Dippold, and the team will continue to develop the company successfully. The last almost four years have always been the achievement of the entire SGL team. SGL Carbon is now sailing in stable waters and my transformation work will therefore be completed shortly,” explains Dr. Torsten Derr.

“We are grateful to Dr. Derr for talking to us early on and in a spirit of trust. This will allow us to take our time in arranging his succession. SGL Carbon can look back on three successful financial years, is financially strong and relies on a broad-based management team that continues to drive forward the expansion of the business in strong growth markets. In our appreciative discussions, Dr. Derr has promised to complete all important projects with his usual commitment until the handover of the CEO position,” says Prof. Dr. Frank Richter.

The Supervisory Board will immediately begin the search for a successor to Dr. Torsten Derr.

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

After 14 years on the Supervisory Board of SGL Carbon, this was Dr. h.c. Susanne Klatten's last Annual General Meeting as Chairwoman of the Supervisory Board. She had already informed the Company on February 14, 2023, that she would be leaving the Board at the end of this Annual General Meeting. As the largest shareholder, Dr. h.c. Klatten will remain associated with SGL Carbon through SKion GmbH.

As proposed, the Annual General Meeting elected Prof. Dr. Frank Richter as a shareholder representative on the Supervisory Board to succeed Dr. h.c. Susanne Klatten. Following the Annual General Meeting, the constituent meeting of the Supervisory Board elected Prof. Dr. Richter as Chairman of the Supervisory Board. Prof. Dr. Richter is Managing Director of SKion GmbH, Bad Homburg, which holds a stake of approximately 28.55% in SGL Carbon SE. Furthermore, Ingeborg Neumann, Managing Partner of Peppermint Holding GmbH, Berlin, was elected to the Supervisory Board of SGL Carbon SE for a further term of office.

• Strengthening market position in Asia-Pacific

Indorama Ventures Public Company Limited (IVL), a global sustainable chemical company, announces that it is in the process of acquiring shares in Ngoc Nghia Industry – Service – Trading Joint Stock Company (NN).

NN is a leading PET converter in Vietnam with long-standing relationships with major brands. It has four manufacturing sites in both the North and South of Vietnam. It has a total production capacity of approximately 5.5 billion units of PET preforms, bottles and closures, or equivalent to a PET conversion of 76,000 tons per annum.

Operating with high quality standards, NN is a trusted provider of PET packaging products to major multinational and Vietnamese brands in the beverage and non-beverage industries. Its business operations are run by an experienced management team with strong industry knowledge as well as local market exposure and understanding. These competitive advantages are strategic fits for IVL and would complement the company’s long-term growth after integration. This proposed acquisition will strengthen IVL’s market position in the packaging business in high growth markets of the Asia-Pacific region.

Mr. D K Agarwal, CEO of Combined PET, IOD and Fibers Business at Indorama Ventures, said, “This investment opportunity is in line with IVL’s business strategy of expanding our footprint in rising economies like Vietnam. The country is positioned to be the ASEAN production hub for the Asia-Pacific region. Moreover, Vietnam’s PET packaging market is expected to grow continuously due to strong growth in consumption and improving living standards. The proposed acquisition would foster sustainable growth in our largest business segment, Combined PET, which has been growing constantly to serve increasing demands globally.”

The acquisition process is required to follow the Law on Securities, its guiding decrees and circulars as required by the State Securities Commission of Vietnam and regulations of the Hanoi Stock Exchange. Through its affiliate, Indorama Netherlands B.V., IVL would be required to do the tender offer of all of NN’s shares. The transaction is expected to be completed by the first half of 2022.

Oerlikon signs agreement to acquire INglass, a global leader in high precision polymer flow control equipment, to accelerate expansion strategy in polymer processing market

• INglass and its HRSflow Division is a market leader spezialized in hot runner sytems
• Technology is highly complementary to Oerlikon’s existing capabilities in polymer flow control and will expand Oerlikon’s market access
• Acquisition accelerates Oerlikon’s strategy in diversifying its manmade fibers business to expand into the high-growth polymer processing solution market
• Oerlikon renames ‘Manmade Fibers’ Division to ‘Polymer Processing Solutions’
• Acquisition is expected to be completed in the second quarter of 2021

Oerlikon, a leading provider of surface engineering, polymer processing and additive manufacturing, announced today that it has signed an agreement to acquire Italy-headquartered INglass S.p.A. and its innovative hot runner systems technology operating under its market-leading HRSflow business.

The strategic acquisition is a significant step in expanding Oerlikon’s current manmade fibers business into the larger polymer processing market. The acquisition accelerates and enhances existing organic initiatives to diversify and strengthen the company’s core high-precision polymer flow control capabilities, products and services. The completion of the transaction is subject to customary regulatory approvals and is expected by the second quarter of 2021.

To reflect Oerlikon’s expansion into a larger high-growth market, the Manmade Fibers Division will be renamed as Polymer Processing Solutions Division. This division will have two business units: Flow Control Solutions and Manmade Fibers Solutions. The busines unit Flow Control Solutions will combine the expertise of Oerlikon Barmag’s existing gear metering pumps business line and INglass’ HRSflow operations. The business unit Manmade Fibers Solutions will continue to focus on growing the existing chemical fiber machinery and plant engineering business, offering plant solutions for the production of polyester, polypropylene and polyamide.

“Our new Polymer Processing Solutions Division and the acquisition of INglass S.p.A. and its HRSflow business are critical components of Oerlikon Group’s growth strategy. We are accelerating our efforts to drive sustainable organic and inorganic growth in all of our businesses. The acquisition enables new synergy opportunities between both Oerlikon divisions in specific end markets such as automotive. With INglass and its HRSflow operations, we acquire leading suppliers in their markets with proven success of their technologies and services,” said Dr. Roland Fischer, CEO Oerlikon Group.

“We firmly believe that within the Oerlikon Group we can further exploit the potential of our hot runner systems technology and, when combined with the capabilities of Oerlikon Barmag gear metering pumps and their melt distribution engineering competence, will position our business as one of the leading precision flow control specialists for multiple applications in a global growth market”, said Antonio Bortuzzo, CEO of INglass S.p.A.

New business unit offers great growth potential

The Oerlikon Barmag competence brand already offers high precision flow control related components, including a large selection of gear metering pumps for textile and non-textile markets. These highly efficient pumps are used in silicone casting, dynamic mixing and oil spraying for the chemical, paint, polymer processing and automotive industries. This double-digit million CHF business, which has grown in recent years, will be merged with INglass’ HRSflow hot runner technologies under the new business unit Flow Control Solutions. HRSflow’s excellent market access to many OEMs in and outside the automotive industry brings significant growth opportunities.

INglass is a leader in automotive and expanding in other sectors

INglass S.p.A. is an internationally operating successful company established in 1987. Its product portfolio includes hot runners as well as engineering and consultancy services for the advanced development of polymer processing products. INglass’ HRSflow hot runner systems are applied in multiple industries from automotive, consumer goods and household appliances to packaging, waste management, construction and transportation.

INglass is headquartered in San Polo di Piave, Italy, near Venice. 2020 revenues of INglass were approximately CHF 135 million and the acquisition is expected to be immediately accretive to Oerlikon’s margins and cash flows. INglass has more than 1 000 employees and 55 sites worldwide, including production plants in Italy, China and the US. Among these sites are INglass’ newly renovated headquarters and production at its primary location in San Polo di Piave near Venice, Italy. The investment modernized the facilities with automated production, underlining the company’s commitment to sustainability and the environment. The other two modern production sites are in Zhejiang (Hangzhou Province) in China and Michigan (Grand Rapids) in the USA.

Following the integration with Oerlikon Barmag’s gear metering pumps business of about 200 employees in Remscheid, Germany, the new Flow Control Solutions business unit will have round about 1 200 employees.

"We see great potential for growth in our new Flow Control Solutions business unit,” said Georg Stausberg, Polymer Processing Solutions Division CEO and Member of the Executive Committee of the Oerlikon Group. “The businesses form the two core growth pillars and benefit from each other in global market development, in modern and digitized production, and in customer services. We also see potential synergies in R&D by combining existing know-how in the field of polymer processing. New technological solutions between hot runner systems and gear metering pumps are conceivable. We also anticipate collaborating more closely with the Oerlikon Surface Solutions Division, particularly in future mobility applications and functional polymer component solutions for the automotive industry. All in all, we will offer our customers innovative and attractive solutions in the field of polymer processing and high precision flow control components.”

Next steps for further diversification of the division product portfolio are already ongoing

Combining the divisions plant engineering and process know how with expertise on high precision flow control components technologies has a significant impact on product quality in nearly all applications, which opens up a platform for further organic and inorganic growth. "We are closely observing the megatrends in the markets and developing new business models to match. In the area of sustainability, covering topics such as circular economy, the recycling of materials using mechanical and chemical recycling solutions, as well as the handling of new, more environmentally friendly and biodegradable materials, we are on the verge of a breakthrough. We are ready to actively participate in these growth areas,” added Georg Stausberg.

“In realigning the Polymer Processing Solutions Division, Oerlikon will continue to apply our successful recipe of a lean organizational structure to efficiently manage the business. This means clear processes, short decision-making paths and competent teams in a diverse and multicultural organization in which everyone can contribute innovatively to create customer value,” said Georg Stausberg.

Deterioration in market segments Textile Fibers and Industrial Applications in the business unit CFM will be counteracted with various measures; strategic growth markets remain intact

• Continued weakness in the business unit Composites – Fibers & Materials (CFM) in the final quarter of 2019 due to the further weakening in the market segment Textile Fibers as well as the deteriorated economic environment in the market segment Industrial Applications leads to a guidance adjustment for the full year 2019
• Earnings deterioration at CFM triggers an impairment testing; impairment charge will become necessary
• Initial outlook for 2020
• Comprehensive measures initiated to improve earnings of the CFM business unit
• CFM strategic growth markets automotive and aerospace remain intact
• Growth in higher-margin aerospace business to be accelerated

While the preliminary results for the first nine months 2019 remain, overall, within the scope of the full year outlook outlined in the ad-hoc notification of August 14, 2019 (preliminary 9M/2019 recurring EBIT: Group: approx. €54 million, CFM: approx. minus €2 million, GMS: approx. €71 million, Corporate: approx. minus €15 million), continued weakness is becoming apparent for the final quarter 2019 in the reporting segment Composites – Fibers & Materials (CFM). This is due to the further weakening in the market segment Textile Fibers as well as the deteriorated economic environment in the market segment Industrial Applications.

SGL Carbon therefore now expects for the full year 2019 a recurring EBIT in the reporting segment CFM in a negative mid to high single digit million € amount (previous guidance: positive mid-single digit million € amount). This results in a Group recurring EBIT for the full year 2019 in the magnitude of €45 to 50 million (previous guidance: approx. €55 million).

The earnings deterioration at CFM triggers an impairment testing. Based on the preliminary status of the new five-year plan, a non-cash impairment charge of €70 to 80 million is becoming apparent in CFM mainly due to the lower starting point in 2019 as well as the ongoing weakness in the market segments Textile Fibers and Industrial Applications. This impairment charge will be recorded in the third quarter 2019. In recent years acquired assets of the former joint ventures with BMW and Benteler are not affected by this impairment.