From the Sector

Reset
87 results
04.12.2020

ANDRITZ to acquire Laroche

International technology Group ANDRITZ has signed an agreement with Laroche, based in Cours, France, to acquire LM Industries comprising Laroche SA and Miltec SA, France. ANDRITZ will take over all Laroche entities and their business worldwide. Closing of the transaction, which is subject to approval by the ANDRITZ Supervisory Board, is expected at the beginning of 2021.

International technology Group ANDRITZ has signed an agreement with Laroche, based in Cours, France, to acquire LM Industries comprising Laroche SA and Miltec SA, France. ANDRITZ will take over all Laroche entities and their business worldwide. Closing of the transaction, which is subject to approval by the ANDRITZ Supervisory Board, is expected at the beginning of 2021.

Laroche is a leading supplier of fiber processing technologies such as opening, blending and dosing, airlay web forming, textile waste recycling and decortication of bast fibers. The product portfolio further complements the ANDRITZ Nonwoven product range. ANDRITZ is now able to offer the complete supply and value chain, from the raw material, to opening and blending, web forming, bonding, finishing, drying, and converting. Laroche’s high-performance technologies for opening and blending enhance the ANDRITZ scope of supply for spunlace, needlepunch and wetlaid production lines. Moreover, both companies have agreed to further strengthen the development of their existing technologies for high-speed and high-capacity applications and also to continue pursuing the development of textile recycling processes in order to stay ahead of the changes the industry is facing.

Laroche SA has been developing fiber processing technologies for more than 100 years. With integrated manufacturing, the company supplies lines for a wide range of industries/products: spinning, bedding and furniture, automotive, acoustic and thermal insulation, geotextiles, filtration, wipes, and many more.

Robert Laroche, President of Laroche: “This acquisition is the logical conclusion in view of the successful long-term relationship between ANDRITZ and Laroche. We have been working in close cooperation for more than ten years and are very much looking forward to becoming a member of the ANDRITZ family.”

Andreas Lukas, Senior Vice President and Division Manager, ANDRITZ Nonwoven: “By adding Laroche’s state-of-the-art products and expertise to our existing capabilities, ANDRITZ Nonwoven will further strengthen its market and technology position.”

Source:

ANDRITZ AG

Bandagenband (c) JUMBO Textil
20.10.2020

JUMBO-Textil: Narrow textiles with a function

Technical textiles fulfil many functions: they hold, they lift, they fixate, they stretch – and they tension. In this function narrow textiles fulfil an important task in product development. And they offer significant advantages over metal or plastic tensioning devices such as springs, clamps or cable ties.

Properties
Textiles are light: a property that plays a central role in modern mobility. Textiles are flexible: from extremely high to extremely low elasticity: the force-elongation behaviour of elasticated narrow textiles can be precisely defined. Depending on the tensioning task to be performed. Textiles tension in tight packaging spaces: elastics can also be used where space is too tight for springs and clasps. Textiles are energy efficient: lightweight, with high tensioning force. Textiles are easy to handle: replace a connector spontaneously and without tools, quickly change the length or roll up and store a supply. And textiles are sustainable: natural fibres and rubber are natural and ecologically degradable raw materials; synthetic fibres can be completely produced from recycled materials.

Technical textiles fulfil many functions: they hold, they lift, they fixate, they stretch – and they tension. In this function narrow textiles fulfil an important task in product development. And they offer significant advantages over metal or plastic tensioning devices such as springs, clamps or cable ties.

Properties
Textiles are light: a property that plays a central role in modern mobility. Textiles are flexible: from extremely high to extremely low elasticity: the force-elongation behaviour of elasticated narrow textiles can be precisely defined. Depending on the tensioning task to be performed. Textiles tension in tight packaging spaces: elastics can also be used where space is too tight for springs and clasps. Textiles are energy efficient: lightweight, with high tensioning force. Textiles are easy to handle: replace a connector spontaneously and without tools, quickly change the length or roll up and store a supply. And textiles are sustainable: natural fibres and rubber are natural and ecologically degradable raw materials; synthetic fibres can be completely produced from recycled materials.

Applications
Development teams in numerous industries leverage these properties for their products. For example, for flexible machine parts in mechanical engineering, for switch contacts in electrical engineering, for oscillation-capable locking systems in the construction industry, for noise- and vibration-free seating systems in the automotive sector or for grip rings in the toys industry.

Tasks
Particularly en vogue today, when we are spending more time than usual in our own homes: applications for narrow textiles in the furniture industry. They go far beyond the area of legacy home textiles: as tensioning elements in armchairs, sofas and chairs, as hinge solutions in cupboards, as fixation elements in extendable or folding tables. Narrow textiles are used for gripping tasks almost everywhere in the living room.

"JUMBO-Textil specialises in precisely implementing the individual requirements for defined force-elongation values of elasticated narrow textiles: we adapt the technical properties of our products precisely to the specific task and the respective raw materials," explains Werner Thiex, Sales Director Automotive. "Precise technical specification plus sustainable raw materials – this is a crucial combination in the 21st century".

Source:

stotz-design.com

World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy (c) pixabay
Cotton
07.10.2020

October, 7th: World Cotton Day

  • World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy

Bremen - Stemming from a 2019 initiative of the African Cotton-4 countries Benin, Burkina Faso, Chad and Mali, World Cotton Day will take place this year on 7 October. The event is organised by the Geneva-based World Trade Organisation (WTO) and is supported by the Food and Agriculture Organisation of the United Nations (FAO), the United Nations Conference on Trade and Development (UNCTAD), the International Trade Centre (ITC) and the International Cotton Secretariat (ICAC). The Bremen Cotton Exchange is also involved.

“Cotton is often underestimated because it is so natural. Behind it are millions of people, for example many farmers, field workers, employees in ginning factories, logistics providers and traders. We want to honour their achievements,” said the President of the Bremen Cotton Exchange, Stephanie Silber.

  • World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy

Bremen - Stemming from a 2019 initiative of the African Cotton-4 countries Benin, Burkina Faso, Chad and Mali, World Cotton Day will take place this year on 7 October. The event is organised by the Geneva-based World Trade Organisation (WTO) and is supported by the Food and Agriculture Organisation of the United Nations (FAO), the United Nations Conference on Trade and Development (UNCTAD), the International Trade Centre (ITC) and the International Cotton Secretariat (ICAC). The Bremen Cotton Exchange is also involved.

“Cotton is often underestimated because it is so natural. Behind it are millions of people, for example many farmers, field workers, employees in ginning factories, logistics providers and traders. We want to honour their achievements,” said the President of the Bremen Cotton Exchange, Stephanie Silber.

According to the WTO, the aim of World Cotton Day is to highlight the global economic importance of cotton and to raise awareness of the raw material by recognising the work of everyone involved in its cultivation, processing and trade. At the same time, within the framework of international cooperation, it is hoped that supporters and investors can be found to aid with technological and economic progress within the cotton value chain.

This time, the entire world cotton community will be involved in World Cotton Day on Wednesday, 7 October 2020. A wide variety of campaigns and events are taking place everywhere to draw attention to the importance of cotton and its possible uses.

Cotton is one of the most relevant agricultural raw materials in the world. Around 26 million tonnes of it are harvested annually. Approximately 150 million people in almost 80 countries around the world live from the cultivation of the natural fibre. A large number of these live in developing countries, where cotton cultivation is of particular importance as a cash crop.

Cotton is known as an agricultural product that is turned into a textile. The raw material is indispensable in fashion and clothing – and has been for thousands of years. But the use of cotton now goes far beyond textiles. For example, cosmetic products such as hand creams and hair shampoo are made from the oil of cotton seeds. The raw material is also used in the manufacture of banknotes, furniture and technical textiles, as well as in medical technology.

Against the background of the current discussion on sustainability and sustainable consumption, the role of natural fibres is becoming even more important. Cotton is biodegradable and a renewable resource. It can be grown again and again in agriculture through cultivation in crop rotation. This secures incomes and enables efficient value creation within the global production and processing chain.

The Bremen Cotton Exchange will actively support World Cotton Day with cross-media coverage. In addition, in time for World Cotton Day, three thematically different, emotionally appealing short films about cotton will be launched. They are aimed at consumers as customers of the textile and clothing trade and provide information about the benefits and properties of cotton and answer questions about its sustainability. In keeping with the times, they will be published via virtual media.

Bio Composites Procedure (c) AZL Aachen GmbH
24.09.2020

Starting market and technology study on the Potential for bio-based composite materials

Sustainability and environmental responsibility are important developments for the current design of productions and products. In order to obtain a comprehensive evaluation of the potential of bio-based composites, the AZL, together with an industry consortium, is investigating the market potential, future applications and relevant technologies for bio-based composite materials. The 5-month market and technology study will start on October 22nd, 2020 and is open to interested companies. Companies such as REHAU, an Automotive Tier 1, Asahi Kasei, Johns Manville, Mahr Metering Systems and several material manufacturers are participating in the study.

Bio-plastics are well established in industry, especially in packaging applications. The market for biopolymers is expected to grow from USD 10.5 billion in 2020 to USD 27.9 billion in 2025. At the same time, bio-based raw materials, such as natural fibers, are available on the market in a cost-effective manner. Composites with wood or natural fiber content are also increasingly used in products.

Sustainability and environmental responsibility are important developments for the current design of productions and products. In order to obtain a comprehensive evaluation of the potential of bio-based composites, the AZL, together with an industry consortium, is investigating the market potential, future applications and relevant technologies for bio-based composite materials. The 5-month market and technology study will start on October 22nd, 2020 and is open to interested companies. Companies such as REHAU, an Automotive Tier 1, Asahi Kasei, Johns Manville, Mahr Metering Systems and several material manufacturers are participating in the study.

Bio-plastics are well established in industry, especially in packaging applications. The market for biopolymers is expected to grow from USD 10.5 billion in 2020 to USD 27.9 billion in 2025. At the same time, bio-based raw materials, such as natural fibers, are available on the market in a cost-effective manner. Composites with wood or natural fiber content are also increasingly used in products.

Dr. Michael Emonts, Managing Partner of AZL: "Together with our partner companies we want to identify hidden business potential for composites with bio-based materials. To do so, we will reapply our established approach for market and technology studies: Based on a detailed market analysis, we will dive deep into the technological evaluation of technologies, applications and business cases.”

Based on a detailed market segmentation, AZL's technology experts analyze the various market segments in terms of their size, growth potential, relevant players and existing and future applications. For the identified applications, the participants in the study will receive detailed insight into the respective technical and legal requirements as well as an overview of value chains, processes and materials. In the following, the strengths and challenges of bio-composites compared to conventional materials are elaborated. The consortium will select the components with the highest potential, for which suitable production scenarios will be developed and analyzed in terms of costs in a business case analysis.

"We are participating in the AZL study to identify and evaluate new product areas with bio-materials. The technological analyses of the AZL studies have already helped us in the past to initiate new developments," says Dr. Steven Schmidt, Director Technology Platforms Materials at REHAU, explaining the motivation for working with the AZL and the industry consortium. "As one of the 50 Sustainability & Climate Leaders, we at REHAU are incorporating environmentally friendly materials into more and more products. Wherever the company is active - from the furniture and construction industries to the automotive industry - REHAU is already developing and manufacturing high-quality products from recycled raw materials. By 2025, REHAU plans to increase its recycling rate across the Group to significantly more than 15 percent and at the same time reduce CO2 emissions by at least 30 percent," adds Dr. Steven Schmidt.

Bio-composites will also be the topic of the upcoming Lightweight TechTalk by AZL on September 29, 2020. Experts from industry and academia will give technology and market insights on sustainability and recycling of composites in 6 presentations. Registration is free of charge at: https://azl-aachen-gmbh.de/termine/recycling-of-composites/.

The kick-off of the project will take place on October 22nd, 2020 in the form of a video conference. Further background information on the project can be found under the following link: https://azl-aachen-gmbh.de/wp-content/uploads/2020/09/2020-251_OP_Bio-Bases_Composites.pdf

Intertextile Shanghai Home Textiles 2020 concluded successfully: online and offline platforms met sourcing demands    (c) Messe Frankfurt (HK) Co Ltd
ITSH20 Fairground
27.08.2020

Intertextile Shanghai Home Textiles 2020 concluded successfully: online and offline platforms met sourcing demands

The 26th edition of Intertextile Shanghai Home Textiles concluded on 26 August, following a successful three-day run at the National Exhibition and Convention Center (Shanghai). It was Messe Frankfurt’s first event to take place in Shanghai in 2020 following disruptions from the pandemic. Amid the challenges presented by the pandemic, this year’s fair provided a vital opportunity for the international home and contract textile industries to source and reconnect through virtual and in-person meetings. Offering a comprehensive range of home and commercial textile products, the fair welcomed over 600 exhibitors and attracted more than 25,000 trade buyers.

The 26th edition of Intertextile Shanghai Home Textiles concluded on 26 August, following a successful three-day run at the National Exhibition and Convention Center (Shanghai). It was Messe Frankfurt’s first event to take place in Shanghai in 2020 following disruptions from the pandemic. Amid the challenges presented by the pandemic, this year’s fair provided a vital opportunity for the international home and contract textile industries to source and reconnect through virtual and in-person meetings. Offering a comprehensive range of home and commercial textile products, the fair welcomed over 600 exhibitors and attracted more than 25,000 trade buyers.

Speaking as the fair concluded, Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “Intertextile has always been dedicated to providing an ideal platform for the international home textile industry and we are delighted to continue to do so during these unprecedented, challenging times. In view of the current global travel restrictions, this year’s fair offered a series of digital tools in addition to the traditional exhibition, allowing the fair to reach as wide an audience as possible. We are glad that this new format was highly recognised by the participating exhibitors and buyers alike.”

“Whilst economic activity in China is progressively recovering and domestic consumption continues to grow, the country’s exports are taking longer to rebound,” Ms Wen added. “One of the main objectives of this year’s fair was to connect domestic and international suppliers and buyers who are eager to make personal contacts and get back to business. As evidenced by feedback from numerous exhibitors and visitors, the fair has been able to help and support the industry’s recovery, so we are delighted with the results.”

Online business matching platform connected worldwide companies
 
In view of the current international travel restrictions, this year’s fair launched a brand new online business matching platform, which connected around 200 buyers from over 50 countries and regions to 60 exhibitors. The platform introduced multiple new functions, such as live-stream product presentations and a real-time chat platform to better facilitate business exchanges between suppliers and buyers from around the world. One exhibitor participating in the platform was Suzhou Roufang Textile Technology Co Ltd. “Yesterday we had a live-stream product presentation, which attracted around 200 buyers. The online platform is useful for us as we could showcase our new products and design concepts to overseas buyers, and let them know that we are still here to serve them,” the company’s Business Manager Ms Yu Qian Ru explained.

Mr Azam Osman, Manager of the Factory Depot (Pty) Ltd from South Africa expressed his satisfaction about the online platform: “I am glad that the fair provided the online business matching service where I have seen a lot of quality furniture and decorative fabric exhibitors. I’m interested in connecting with them.” Another buyer, Ms Elena Freyuk from Ziptown Trading Inc. said: "I am pleased that the fair offered both live-stream and video recording product presentations as I was unable to watch the live presentation due to time difference. The services were very thoughtful!”

A source of inspiration for the industry
 
To ensure fairgoers can discover the latest design and industry trends and insights, this year’s fringe programme presented a series of high quality events, covering the industry’s hottest topics. Some of the highlights included the 2021 Intertextile Trend Forum, which was led by Shen Lei, the Chinese representative of the Intertextile International Lifestyle Trend Committee. The forum brought together five prominent Chinese designers including Ben Chen, Ben Wu, Meng Ye, Paul Pang and Xie Ke, who presented an in-depth interpretation of the theme of 2021 Intertextile Trends, “BOUND”. Other events included Ride the Storm – Home Textile Digital Printing Forum, Tmall Seminar on industry digitalisation, Furniture & Home Textile Direct Negotiation Event and more.

Intertextile Shanghai Home Textiles 2020 opens next Monday: new digital tools complement in-person meetings   (c) Intertextile Shanghai Home Textiles
Intertextile Shanghai Home Textiles 2020
21.08.2020

Intertextile Shanghai Home Textiles 2020 opens next Monday: new digital tools complement in-person meetings

Asia’s leading trade platform for the home and contract textile industry, Intertextile Shanghai Home Textiles, is ready to welcome over 600 exhibitors to China’s commercial hub from 24 – 26 August. As China’s economy continues its recovery, the upcoming fair will serve as a key platform for the industry to reconnect and prepare for the seasons ahead. Taking consideration of current international travel restrictions, Intertextile has launched a brand new online business matching platform, enabling participation for those who cannot travel to Shanghai.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “2020 has been a difficult and unpredictable year for every business and industry across the world, so we are pleased to be providing a platform for the home textile industry to connect and recover from the coronavirus pandemic. Intertextile Shanghai Home Textiles is the first physical trade event for the sector held by Messe Frankfurt since January, so we hope that the fair assists the sector to join forces and overcome this challenging year together.”

Asia’s leading trade platform for the home and contract textile industry, Intertextile Shanghai Home Textiles, is ready to welcome over 600 exhibitors to China’s commercial hub from 24 – 26 August. As China’s economy continues its recovery, the upcoming fair will serve as a key platform for the industry to reconnect and prepare for the seasons ahead. Taking consideration of current international travel restrictions, Intertextile has launched a brand new online business matching platform, enabling participation for those who cannot travel to Shanghai.

Ms Wendy Wen, Senior General Manager of Messe Frankfurt (HK) Ltd commented: “2020 has been a difficult and unpredictable year for every business and industry across the world, so we are pleased to be providing a platform for the home textile industry to connect and recover from the coronavirus pandemic. Intertextile Shanghai Home Textiles is the first physical trade event for the sector held by Messe Frankfurt since January, so we hope that the fair assists the sector to join forces and overcome this challenging year together.”

Ms Wen continued: “Our first priority is to create a clean and hygienic space for all participants to source and network. To achieve this goal, the fair will implement extra health care and hygiene precautions onsite. On the other hand, we are aware that a number of travel restrictions are still in place across the world. With this in mind, Intertextile will offer a series of online services for those who are unable to travel to Shanghai, allowing the fair to reach as wide an audience as possible.”

2020 fair highlights

To provide buyers with greater efficiency, the fair, which covers four halls, will be divided clearly by product categories: Household Hall (hall 3), International Brands / Upholstery Hall (hall 4.1), Brand Fabrics Hall (hall 5.1) and Sofa Fabrics Hall (hall 6.1).

In addition, the Contract Business 360° concept will return this year, with over 40 premier upholstery exhibitors presenting their latest textile products and furnishing solutions for contract use. Exhibitors include Guangzhou Yuanzhicheng Home Textile, Haining Julai Textile, JAB, Morgan Shanghai, Symphony Mills, Suzhou Roufang, Ter Molst International, Zhejiang Hexin and Zhejiang Maya Fabric. Furthermore, top brands such as Agmamito from Poland and Wollsdorf Leather from Austria will be exhibiting for the first time at Intertextile.

Online business matching platform offers new sourcing landscape

Although face-to-face interaction is irreplaceable, a virtual complement has become more important as a result of the worldwide pandemic. To support the industry during these unprecedented times, Intertextile has launched a brand new online business matching platform. With this free service, participants are able to source and network at their fingertips. The virtual platform will offer many new features including:

  • Easy sourcing: exhibitors are categorised by product groups including Sofa / Decorative Fabrics, Curtains and Accessories, Bedding and Finished products, Shading and Accessories, and Editors
  • Live-streamed product presentations of exhibitors
  • Smart recommendations: pre-selected exhibitor lists will be provided to buyers based on their personal preferences and interests
  • Convenience: participants are able to use the service through computers or portable devices without the need to download any software

High quality fringe programme covers comprehensive topics
 
The fair’s event programme will once again provide the industry with the latest trends and insights in four topics: Design Inspiration, Business O2O, Textile & Technology and Industry Empowerment. One of the highlights will be the 2021 Intertextile Trend Forum, led by Shen Lei, the Chinese representative of the Intertextile International Lifestyle Trend Committee. The forum will bring together five prominent Chinese designers including Ben Chen, Ben Wu, Meng Ye, Paul Pang and Xie Ke, who will delve into the theme of 2021 Intertextile Trends–“BOUND”, as well as the Chinese market conditions. The event will be held on day 1 of the fair, from 14:00 – 17:00 in hall 5.1 booth C18, and streamed live online.

Another not-to-be-missed event is the Ride the Storm – Home Textile Digital Printing Forum, which will include an array of educating seminars that cover the latest digital textile printing trends and technologies. The forum will be held on day 2 of the fair, from 13:20 – 17:20 in hall 3, booth M12.

Furthermore, joining forces with Tmall Global, the largest cross border B2C online retail platform in China, the fair will host a series of seminars delivering the solutions and strategies for industry digitalisation during the afternoon of day 1. In addition, the well-received Furniture & Home Textile Direct Negotiation Event will return to provide an excellent opportunity for furniture companies and fabric brands to collaborate.

Additional health care and hygiene precautions will be in place

As trade fair co-organisers, Messe Frankfurt’s number one priority always remains the health and safety of fairgoers. To maintain a clean and hygienic environment for visitors and exhibitors to meet in, extra measures will be in practice at the fair. These include: real-name registration, onsite temperature checks, frequent sterilisation of public areas and distancing measures for forum / seminar audiences, amongst others.

Digitak services always in fashion with Mimaki sublimation and direct printing (c) Mimaki
Filippo Taccani, founder and owner at Digitak, in the company’s production department, surrounded by an arsenal of Mimaki’s printing solutions.
01.07.2020

Digitak services always in fashion with Mimaki sublimation and direct printing

  • Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
  • With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

  • Specialised in dye-sublimation printing, the Italian company has conquered the heights of the high fashion sector with its top-quality printed fabrics.
  • With its recent investment in a direct-to-fabric printing line, Digitak is preparing to expand its range of printed products, focusing on fabric differentiation.

Dye sublimation printing of high fashion designs is the beating heart of Digitak, an Italian company specialised in digital textile printing. Operating in the textile district of Lombardy, Italy, the company has established itself among the main suppliers in the world of high fashion and sportswear in just under 15 years.

Making production versatility one of the cornerstones of its philosophy, Digitak has continued to invest in technology, as well as research and development its product portfolio. This forward-thinking approach has enabled the company to guarantee innovative, personalised products with meticulous attention to detail, with the highest – almost obsessive – standards of quality and maximum design flexibility. Over the years, the extensive experience gained by the company’s management in the field of sublimation with traditional and digital techniques, combined with their investment decisions have allowed Digitak to enhance its production performance, gradually implementing higher quality standards and differentiating itself from the competition in the complex and competitive sector of high fashion. An important feat, which has not, however, dampened its enthusiasm and willingness to continue growing and exceeding its goals. The company’s latest investment in a direct-to-fabric digital printing line with pigment ink propels the company into a new and promising production dimension.

Sublimation printing specialists

Since Digitak’s establishment, Filippo Taccani, the founder and current owner of the company, had set himself a clear and ambitious objective: “I wanted to take up the challenge of operating digitally - printing fabrics using this innovative technology to create products on a par with those  I had achieved with traditional sublimation textile printing methods during my previous work experience.”

The purchase of a Mimaki JV4 plotter, one of the first to be installed in Italy, marked the beginning of Digitak’s adventure. “To start the business, I needed a printing system that could operate with dispersed inks to print on polyester and I found the JV4 to be the best option,” explains Taccani. “It was an excellent decision, because I used these plotters to build the company and its success.”

The first Mimaki plotter was in fact followed by a second and a third. When it bought the fifth, the company moved to an industrial unit in Tradate (Varese) – Digitak’s current site – which now houses around fifteen Mimaki JV33 plotters, in addition to three Mimaki TS500-1800 wide-format sublimation printers, and a Mimaki TS300P-1800 high-speed sublimation printer. This Mimaki powered production facility – which is one of the company’s core strengths – was recently expanded with the addition of a Mimaki TX300P-1800B belt-type hybrid printing system, together with a Mimaki TR300-1850C textile coater and a Mimaki Tiger-1800.

“Naturally, over the years, we have also tested printing systems from other suppliers, but we have always returned to Mimaki. With high fashion as our key market, we need to guarantee our customers the highest levels of quality and, to date, we have never found solutions that beat the quality of this Japanese brand’s technology.”

According to Taccani, the difference lies in the “calligraphy” of Mimaki’s machines, that is the line of the ink on the fabric: “Unlike its competitors, Mimaki has focused on the ‘waveforms’, i.e. the electronics associated with the print heads. This attention paid to the way the ink jet is managed from the print head has allowed Mimaki to achieve unparalleled levels of accuracy, an aspect that has given my company a clear competitive edge.”

Moreover, at Digitak, quality comes before quantity: “We prefer to dedicate an extra day to production to guarantee the customer a final product that fully meets requirements and expectations. Mimaki’s technology not only suits this business model bult on top quality, but it crucially enables it.”

Operational and creative flexibility

Digitak currently prints around 2,000 linear metres of fabric per day. Its portfolio ranges from clothing and scarves, to beach and swimwear, with related personalised accessories, to sportswear, with technical properties such as breathability, comfort, resistance to external agents. The company have even added customised outdoor furniture to their offering of diverse and creative products.
The company’s machines operate continuously, 24/7. During the day, the machines are mainly used to develop and produce samples and colour proofs, while the actual production is carried out at night. “Thanks to our technology, we have developed an extraordinary operational flexibility. The fact that we have so many plotters allows us to work on multiple designs at the same time and to launch projects that are also very different from one another,” explains Taccani. “There are also some other crucial factors that have contributed, and continue to contribute, to increasing our production efficiency. The reliability of Mimaki’s solutions and the remote monitoring option offered is key. Once the standard start-up monitoring has been carried out and the machines are found to be printing correctly, we can let them work overnight without an operator. This is a great benefit for people who, like us, manage such a large and diverse fleet of machines.”

Digitak takes the same approach to customer service. Faced with an increasingly demanding market in terms of creativity, precision and completeness of service, the company wants to guarantee flexibility and customisation. “We decided to set up a department dedicated to the pre-press stage, in charge of preparing and checking the files supplied by customers. Seldom do our teams not need to do some editing of the files supplied, even if it’s only to make small changes that are essential for the print document to be as suitable as possible and to achieve the best final result.”

Technologies of the future

With a view to further enhancing production and customer service, Taccani has chosen to take on a new challenge, switching things up with some of the most recent investments.

While maintaining the focus on dye sublimation printing, Taccani has focused on technological diversification by installing a direct-to-fabric digital printing line. This consists of a Mimaki TX300P-1800B printing system with pigment inks and a TR300-1850C coater from Mimaki’s TR series. “The market continues to evolve and now requires even more flexibility regarding both processes and the fabrics supplied. This means that great opportunities exist for a print shop capable of simultaneously producing the same design – with minimal colour adjustment – on different fabrics, guaranteeing similar and accurate results. And this is precisely the path we are taking,” says Taccani. “Why have we opted for Mimaki again? Well, I had an opportunity to try out their new pigment inks and I immediately realised that they are a generation ahead of the other pigments available on the market. The cyan is very clean, the black is deep and there is a very interesting fullness of colour, suitable not only for furnishings, but also for other applications in the clothing sector.”

With its pigment inks, the new direct-to-fabric printing line allows Digitak to explore other related market segments. Thanks to the innovative automatic belt system, the TX300P-1800B guarantees good productivity and high-quality results. A standard of quality that is also boosted by the TR300-1850C fabric pre-treatment system: “This coater is essential for ensuring the best possible preparation of fabrics for printing. In fact, we are able to treat fabrics to make them suitable for the type of print they are intended for, sanitise them for specific applications and, in some cases, even dye them, with excellent quality.”

According to Taccani, another beneficial factor of direct-to-fabric pigment printing technology is the eco-sustainability of the process and its lower environmental impact. “We are proud to be able to offer our customers excellent printing results using little water and printing in ‘green mode’, with both the technologies we have available. I consider them winning technologies for the future, as both dye sublimation printing and direct-to-fabric printing with pigment inks use little water while mainly requiring the use of energy. Therefore, if you use renewable energy, then you’re done.”

Digitak’s other trump card is the Tiger-1800 installed in 2019. With this industrial printing system, the company aims to increase production volumes while maintaining its high-quality standards and further optimising costs. “We are excited to have these promising technologies available to us in-house. We are currently experimenting with these solutions, testing new opportunities and evaluating which paths to take to stay ahead of the game,” concludes Taccani.

 

Source:

Mimaki Europe B.V.

Beaulieu International Group and Greencare (c) Beaulieu International Group
Beaulieu International Group and Greencare
16.04.2020

Tessutica produces furniture upholstery from recycled marine waste

Beaulieu International Group (B.I.G.)’s Tessutica business is proud to announce a new product line in upholstery. Greencare fabrics are created from pellets that come from marine plastic waste. The fabrics themselves can then be 100% recycled into pellets again.

The new Greencare collection is made with 100% recycled and recyclable upholstery fabrics and is certified with the the Global Recycle Standard (GRS) label. The company used recycled yarns from regular post-consumer PET bottles from the oceans, landfills and upcycled cotton from garments.
For this, Tessutica partnered with the Seaqual project, which brings plastic waste back into the manufacturing chain. Through the recycling process there is no usage of new petroleum which decresases the CO₂  emissions significantly compared to the use of virgin polyester.

With growing demands for sustainability within the business world as well as from end-consumers, Tessutica felt it was the right choice to offer a product line that comes with a full guarantee of environmental consciousness.

 

Beaulieu International Group (B.I.G.)’s Tessutica business is proud to announce a new product line in upholstery. Greencare fabrics are created from pellets that come from marine plastic waste. The fabrics themselves can then be 100% recycled into pellets again.

The new Greencare collection is made with 100% recycled and recyclable upholstery fabrics and is certified with the the Global Recycle Standard (GRS) label. The company used recycled yarns from regular post-consumer PET bottles from the oceans, landfills and upcycled cotton from garments.
For this, Tessutica partnered with the Seaqual project, which brings plastic waste back into the manufacturing chain. Through the recycling process there is no usage of new petroleum which decresases the CO₂  emissions significantly compared to the use of virgin polyester.

With growing demands for sustainability within the business world as well as from end-consumers, Tessutica felt it was the right choice to offer a product line that comes with a full guarantee of environmental consciousness.

 

(c) MECELEC COMPOSITES
03.02.2020

MECELEC COMPOSITES designs Flax fibre roofs for 550 Morris columns

At JEC World 2020, MECELEC COMPOSITES is a finalist of the JEC Innovation Awards in the Design & Furniture category. The Group announces the launch of a new sustainable development application on the urban design market. MECELEC COMPOSITES designed the first mass-produced flax fibre roofs for the 550 Morris columns installed by JCDecaux in Paris. “This is the first application of flax fibre BMC for mass production. The new solution combines all the advantages of composite materials, lightness and strength, with stringent environmental requirements and is adapted to the safety constraints of this kind of street furniture,” says Bénédicte Durand, Chief Executive Officer at MECELEC COMPOSITES.

At JEC World 2020, MECELEC COMPOSITES is a finalist of the JEC Innovation Awards in the Design & Furniture category. The Group announces the launch of a new sustainable development application on the urban design market. MECELEC COMPOSITES designed the first mass-produced flax fibre roofs for the 550 Morris columns installed by JCDecaux in Paris. “This is the first application of flax fibre BMC for mass production. The new solution combines all the advantages of composite materials, lightness and strength, with stringent environmental requirements and is adapted to the safety constraints of this kind of street furniture,” says Bénédicte Durand, Chief Executive Officer at MECELEC COMPOSITES.

A COMPOSITE ROOF THAT IS BOTH INNOVATIVE AND GREEN
The dome of the Morris columns is composed of 23 different parts, 14 of which are made from composite materials. To design the roof, MECELEC COMPOSITES developed a new RTM complex and a new BMC material, that is reinforced exclusively with a flax mat. “Today it is the only BMC with a 100% flax fibre reinforcement, which uses a partially recycled ABS resin. It was created specifically for this project and we had to work on the processes in order to adapt them to this new material,” explains Bertrand Vieille, Head of sales.
In the design, MECELEC COMPOSITES replaced the bonding process with a time-saving mechanical assembly process using an invisible fixing system.

AN ECO-FRIENDLY APPLICATION IN LINE WITH THE GROUP’S ECO-DESIGN CSR APPROACH
MECELEC COMPOSITES creates scalable, sustainable and environmentally-friendly street furniture. The Group is committed to developing a sustainable production process and reuses all its waste materials. MECELEC COMPOSITES R&D laboratory promotes eco-design with a process of characterisation and mechanical sizing of parts. “For this project, we imagined, created, produced and delivered a mass-produced composite application with a low environmental impact within less than a year. At the end of its lifecycle, the product completely breaks down, leaving no fibre residue,” Bénédicte Durand concludes.

More information:
fiber-reinforced composites
Source:

AGENCE APOCOPE

Neue Technologie in der HeiQ Fresh-Serie verwandelt Vorhänge in Luftreiniger (c) HeiQ
Neue Technologie in der HeiQ Fresh-Serie verwandelt Vorhänge in Luftreiniger
04.12.2019

New technology in the HeiQ Fresh range turns curtains into air purifiers

Swiss textile innovator HeiQ has added a new dimension to air management in the HeiQ Fresh product range – air purifying functionality that will be used in curtains from IKEA to reduce indoor air pollutants such as the Volatile Organic Compounds (VOCs) acetaldehyde, formaldehyde and nitrogen oxide (NO).

No electricity required, no extra space occupied, the Gunrid curtain from IKEA looks like an ordinary curtain but performs a novel function – it purifies indoor air because it is infused with the latest technology in the HeiQ Fresh range – HeiQ Fresh AIR. Gunrid curtains will be available in IKEA retail stores in 2020.

Swiss textile innovator HeiQ has added a new dimension to air management in the HeiQ Fresh product range – air purifying functionality that will be used in curtains from IKEA to reduce indoor air pollutants such as the Volatile Organic Compounds (VOCs) acetaldehyde, formaldehyde and nitrogen oxide (NO).

No electricity required, no extra space occupied, the Gunrid curtain from IKEA looks like an ordinary curtain but performs a novel function – it purifies indoor air because it is infused with the latest technology in the HeiQ Fresh range – HeiQ Fresh AIR. Gunrid curtains will be available in IKEA retail stores in 2020.

According to the World Health Organization, over 80% of urban residents are exposed to high levels of air pollution1. The concentration of VOCs indoors is generally higher than outdoors2.. While many VOCs are not considered as harmful to health, such as perfumes and fragrances, some others such as acetaldehyde, formaldehyde, nitrogen oxide (NO) and d-limonene and other semi-volatile polycyclic aromatic hydrocarbons are attributed as responsible for significant negative impact on health by the World Health Organization (WHO). These VOCs come from outdoor sources as well as indoor sources such as furniture, paints, household cleaning products, sprays or cooking activities, as outlined in the clean air survey 2018, conducted by IKEA. Aiming to improve the lives of people through making everyday textiles more functional, HeiQ innovated a textile treatment that will use home fabrics such as curtains as a medium to purify the indoor air.

More information:
HeiQ HeiQ Smart Temp IKEA
Source:

HeiQ

Special exhibition “Textile Future by Trevira CS” presented by studio aisslinger (c) studio aisslinger
05.11.2019

Trevira at Heimtextil 2020

Special features: over 30 top clients at a joint stand and a special exhibition highlighting trendsetting textile concepts for the contract market

Trevira, which manufactures high-quality, flame retardant polyester fibres, will be repeating its successful joint booth concept at the upcoming Heimtextil fair, due to take place from 7-10 January 2020 in Frankfurt. Together with 32 of its major customers, Trevira will be located on a stand of over 2000 msq in Hall 4.2.

The participants of the Trevira CS joint stand will cover the entire textile value chain: from the fibre production and yarn manufacture, to the colouring, weaving and warp and weft knitting stages, to the textile editor. Trevira’s customers will present their latest Trevira CS products for home and contract textiles at individual stands, demonstrating their contribution to the value chain. This year, Trevira welcomes a new partner to its Heimtextil stand, design and engineering specialist ima-tuve.

Special features: over 30 top clients at a joint stand and a special exhibition highlighting trendsetting textile concepts for the contract market

Trevira, which manufactures high-quality, flame retardant polyester fibres, will be repeating its successful joint booth concept at the upcoming Heimtextil fair, due to take place from 7-10 January 2020 in Frankfurt. Together with 32 of its major customers, Trevira will be located on a stand of over 2000 msq in Hall 4.2.

The participants of the Trevira CS joint stand will cover the entire textile value chain: from the fibre production and yarn manufacture, to the colouring, weaving and warp and weft knitting stages, to the textile editor. Trevira’s customers will present their latest Trevira CS products for home and contract textiles at individual stands, demonstrating their contribution to the value chain. This year, Trevira welcomes a new partner to its Heimtextil stand, design and engineering specialist ima-tuve.

“We’re excited that our joint fair booth has proved to be so popular and that we are increasing the number of Trevira CS customers joining us for Heimtextil year on year. This means that we can once again look forward to displaying the extensive range of possibilities and applications available in Trevira CS,” said Trevira CEO Klaus Holz.

Trevira’s joint booth, which will be situated in Hall 4.2, immediately next to the Messe Frankfurt exhibition “Interior. Architecture. Hospitality”, will also feature a special showcase, “Textile Future by Trevira CS” especially for the contract market. To curate this special display, Trevira is proud to have secured a collaborative partnership with renowned Berlin design company studio aisslinger. The studio is known for its outstanding work in experimental and product design, innovative materials and architectural concepts.  As a designer, studio founder Werner Aisslinger is particularly interested in how the newest technologies and unusual materials can be integrated into product design. Besides a focus on furniture, his most recent projects include interior design concepts for hotels and workspaces.

More information:
heimtextil 2020 Trevira GmbH
Source:

Trevira GmbH

lectra (c) Lectra
lectra
01.10.2019

Lectra supports growth in Asia with market-attuned solutions

On-demand production a focal point of Industry 4.0 demonstrations at CISMA, Asia’s major garment and textile technology exhibition
Lectra unveiled its flagship Industry 4.0 solutions for Asia—Fashion On Demand by Lectra and Furniture On Demand by Lectra—as well as the new VectorAutomotive iP9 fabric-cutting solution for automotive seating and interiors this week, at the 2019 edition of the China International Sewing Machinery and Accessories (CISMA) exhibition in Shanghai.

Under the banner “Lectra 4.0: Digitalizing and Connecting Your Value Chain”, Lectra asserted its leadership as the trusted advisor to fashion, furniture and automotive companies undertaking digital transformation. Smart, connected supply chains are at the core of the fourth industrial revolution. In all industries using textiles, the intelligent factory requires a high degree of flexibility, maximum efficiency and optimal planning processes for a variety of production types, from mass production to on-demand production. These requirements are paramount to the future success of companies competing for business on Asian markets.

On-demand production a focal point of Industry 4.0 demonstrations at CISMA, Asia’s major garment and textile technology exhibition
Lectra unveiled its flagship Industry 4.0 solutions for Asia—Fashion On Demand by Lectra and Furniture On Demand by Lectra—as well as the new VectorAutomotive iP9 fabric-cutting solution for automotive seating and interiors this week, at the 2019 edition of the China International Sewing Machinery and Accessories (CISMA) exhibition in Shanghai.

Under the banner “Lectra 4.0: Digitalizing and Connecting Your Value Chain”, Lectra asserted its leadership as the trusted advisor to fashion, furniture and automotive companies undertaking digital transformation. Smart, connected supply chains are at the core of the fourth industrial revolution. In all industries using textiles, the intelligent factory requires a high degree of flexibility, maximum efficiency and optimal planning processes for a variety of production types, from mass production to on-demand production. These requirements are paramount to the future success of companies competing for business on Asian markets.

More information:
Lectra, PLM CISMA
Source:

Lectra

 50. Ausgabe: Heimtextil feiert ein halbes Jahrhundert Weltleitmesse (c) Messe Frankfurt Exhibition GmbH
25.09.2019

50th edition: Heimtextil celebrates half a century as a leading trade fair

  • Heimtextil celebrates its anniversary: from 7-10 January 2020, the global home textiles industry will meet for the 50th time in Frankfurt am Main.

With a great anniversary party, a showcase presenting design classics from the past few decades, an anniversary film and other activities, Heimtextil will review the past half century since its first edition in 1971.

‘50 editions over the course of the past five decades are a rarely experienced phenomenon in the fast-moving global trade fair industry and are practically an eternity’, says Detlef Braun, CEO of Messe Frankfurt. ‘Like no other trade fair, Heimtextil stands for product variety, international clout and undisputed market leadership in the textile sector’. As a design show, it constantly reinvents itself, continues to present
state-of-the-art home trends as it has always done and makes the furnishing trends of tomorrow tangible’.

Big celebration party on the Wednesday of the trade fair

  • Heimtextil celebrates its anniversary: from 7-10 January 2020, the global home textiles industry will meet for the 50th time in Frankfurt am Main.

With a great anniversary party, a showcase presenting design classics from the past few decades, an anniversary film and other activities, Heimtextil will review the past half century since its first edition in 1971.

‘50 editions over the course of the past five decades are a rarely experienced phenomenon in the fast-moving global trade fair industry and are practically an eternity’, says Detlef Braun, CEO of Messe Frankfurt. ‘Like no other trade fair, Heimtextil stands for product variety, international clout and undisputed market leadership in the textile sector’. As a design show, it constantly reinvents itself, continues to present
state-of-the-art home trends as it has always done and makes the furnishing trends of tomorrow tangible’.

Big celebration party on the Wednesday of the trade fair

Messe Frankfurt will be inviting exhibitors and visitors to the highlight of the celebrations, the big Heimtextil @ Night party in hall 11.1 on Wednesday, 8 January 2020. Heimtextil exhibitors from the very beginning will be warmly welcomed and paid special attention. As part of the celebrations, Messe Frankfurt will present an anniversary film with a look back at earlier Heimtextil editions as well as music acts from the last five decades.

In hall 9.0, Heimtextil will present design classics from the past 50 years in a special showcase area. Here, the trade fair will invite people to take a journey through time and a tour of discovery through five  decades of Heimtextil history. The presentation is based on editorials from interior magazines. Four rooms incorporate colours, shapes, furniture and design objects from past decades. The showcase is complemented by a café that will be realised in cooperation with Schöner Wohnen, Europe's largest living magazine.

Exclusive offer: anniversary scarf in the Heimtextil look

To mark the anniversary, Heimtextil will launch a textile accessory of its  own creation: a scarf in the look of the current trade fair campaign. The scarf in the unisex colour combination of petrol, turquoise and lilac will be available for exhibitors and visitors to buy during the trade fair.

 

Source:

Messe Frankfurt Exhibition GmbH

26.07.2019

Expansion of pulp production at the Lenzing site successfully completed

  • Production capacities increased to 320,000 tons p.a.
  • Investments of EUR 60 mn enhance self-sufficiency and strengthen autonomy from market prices
  • Project serves as a significant economic driver in the region

Lenzing AG, producer of pulp and fibers from the renewable raw material wood, has concluded its expansion and modernization drive at the pulp plant at the Lenzing site. The company invested EUR 60 mn for this purpose, increasing production capacities for dissolving pulp extracted from beech wood from 300,000 to 320,000 tons per year. The coming on stream of the additional pulp capacities over the past weeks strengthens Lenzing’s self-supply of pulp in accordance with the sCore TEN corporate strategy.

  • Production capacities increased to 320,000 tons p.a.
  • Investments of EUR 60 mn enhance self-sufficiency and strengthen autonomy from market prices
  • Project serves as a significant economic driver in the region

Lenzing AG, producer of pulp and fibers from the renewable raw material wood, has concluded its expansion and modernization drive at the pulp plant at the Lenzing site. The company invested EUR 60 mn for this purpose, increasing production capacities for dissolving pulp extracted from beech wood from 300,000 to 320,000 tons per year. The coming on stream of the additional pulp capacities over the past weeks strengthens Lenzing’s self-supply of pulp in accordance with the sCore TEN corporate strategy.

“The successful expansion brings us closer to achieving our strategic objective of increasing our self-supply of pulp to a level of 75 percent, thus making us even more resistant to price fluctuations in sourcing pulp”, says Stefan Doboczky, CEO of the Lenzing Group. “We are also pleased that this project enables us to make a further significant contribution towards strengthening the Lenzing site as well as the regional economy”, Mr. Doboczky adds.

The expansion drive was completed in less than two years. In addition to 100 Lenzing Group employees, numerous external partner companies from Upper Austria and neighboring regions were involved in implementing the project. About 40,000 working days were needed by external companies in order to install the delivered machinery on site. The Lenzing Group secured additional jobs due to the pre-production work required in the factories of these suppliers.

In line with the corporate strategy of the Lenzing Group, the self-supply of dissolving wood pulp will be successively increased in the coming years to 75 percent of consumption. At present, Lenzing’s own pulp plants in Lenzing and Paskov (Czech Republic) cover 60 percent of the Group’s pulp requirements. The Lenzing site primarily makes use of beech wood which is not suitable for producing furniture, whereas it mainly relies on spruce wood in the Czech Republic. The remaining dissolving wood pulp is sourced from a variety of hardwoods and softwoods from international partners. In this case, in the spirit of sustainability, Lenzing applies procurement rules which are just as strict as when it purchases wood for its own pulp production.

Source:

Lenzing AG

(c) BASF Venture Capital GmbH
06.11.2018

BASF invests in Chinese 3D printing specialist Prismlab

  • Unique, patented 3D printing process enables production of large-scale components
  • First direct investment by BASF Venture Capital in a company in China

BASF Venture Capital GmbH is investing in Prismlab, a leading provider of 3D printing processes and 3D printers, headquartered in Shanghai, China. Prismlab has developed a patented printing process that is characterized by a very high printing speed, high level of precision and lower printing costs. BASF’s venture investment will enable Prismlab to further accelerate its product development and innovation while strengthening its market reach to the global market.

“This is our first direct investment in a Chinese company,” said Markus Solibieda, Managing Director of BASF Venture Capital GmbH. “The trailblazing technology from Prismlab allows large and stable components, such as medical braces and anatomical models, to be 3D printed for the first time. This investment supports BASF’s strategy of actively advancing our technologies and expanding our product offering in the 3D printing sector.”

  • Unique, patented 3D printing process enables production of large-scale components
  • First direct investment by BASF Venture Capital in a company in China

BASF Venture Capital GmbH is investing in Prismlab, a leading provider of 3D printing processes and 3D printers, headquartered in Shanghai, China. Prismlab has developed a patented printing process that is characterized by a very high printing speed, high level of precision and lower printing costs. BASF’s venture investment will enable Prismlab to further accelerate its product development and innovation while strengthening its market reach to the global market.

“This is our first direct investment in a Chinese company,” said Markus Solibieda, Managing Director of BASF Venture Capital GmbH. “The trailblazing technology from Prismlab allows large and stable components, such as medical braces and anatomical models, to be 3D printed for the first time. This investment supports BASF’s strategy of actively advancing our technologies and expanding our product offering in the 3D printing sector.”

“China is transforming from a manufacturing-driven to an innovation-driven economy. This investment in Prismlab reflects our commitment to further expanding our innovation capabilities in China, and BASF Venture Capital plays an important role in helping us identifying potential partners that lead us to success,” said Dr. Zheng Daqing, BASF’s Senior Vice President, Business and Market Development Greater China.

“The 3D printing technology must continue to evolve before it is set to change the world. At Prismlab, we aim to spearhead and accelerate that change by providing solutions through specialized customization. The investment allows us to stay laser-focused on our R&D capability, a key factor to achieve that goal,” said Mr. Hou Feng, Founder and Chairman of Prismlab.

Prismlab has developed a patented 3D printing process, “Pixel Resolution Enhanced Technology”, based on stereolithography (SLA). SLA allows comparatively large components to be produced using light-curing resins. Prismlab’s technology increases the printing resolution without compromising printing speed. In order to increase the amount of energy brought into a pixel, Prismlab’s technology divides each pixel in the resin into several small sections, which can be cured individually by exposure to LCD light. This makes the energy input into each pixel significantly higher than similar processes that expose each pixel to light once. This allows comparatively large and stable components or numerous parts to be printed in the same production step. With the use of LCD light, it also reduces process costs. This advantage opens opportunities in the footwear and furniture industry.

Along with this patented process, Prismlab also markets 3D printers and other related services. The Prismlab technology can be used in various key customer applications, including invisible braces, and anatomical models for medical, and education and training purposes.

SLA uses a laser for layer-by-layer curing of a photopolymer solution to shape the required workpiece. SLA and LCD based printing processes determinate the size, stability, and usability of the components to be produced as they are limited by the size of the light spot and the intensity of the light.

More information:
BASF prismlab
Source:

BASF Venture Capital GmbH

(c) KLULE/Unsplash
Composites offer design freedom and exceptional mechanical properties at low weight for furniture applications
22.10.2018

Composites are opening up new horizons for the furniture industry

What does the furniture market look like and what potential composites offer for the furniture of today and tomorrow? The AZL is investigating this question together with companies from the composite and furniture industry. The result will be an overview of the current market and the materials used to date as well as an outlook on future mass applications for fiber-reinforced plastics (FRP). The study is open to interested companies and starts with a kick-off meeting at Composites Europe in Stuttgart on November 7th, 2018.

Furniture, its design and function have undergone major changes in recent decades: From robust lifelong companions to trend-setting models, from handmade one-of-a-kind pieces to mass products, from storage objects to multi-functional and “smart” all-rounders. This goes along with an increased diversity in terms of design and the materials used – and high potential for composites that offer additional design freedom and exceptional mechanical properties at low weight.

Study provides overview of furniture market and unique selling points of composites

What does the furniture market look like and what potential composites offer for the furniture of today and tomorrow? The AZL is investigating this question together with companies from the composite and furniture industry. The result will be an overview of the current market and the materials used to date as well as an outlook on future mass applications for fiber-reinforced plastics (FRP). The study is open to interested companies and starts with a kick-off meeting at Composites Europe in Stuttgart on November 7th, 2018.

Furniture, its design and function have undergone major changes in recent decades: From robust lifelong companions to trend-setting models, from handmade one-of-a-kind pieces to mass products, from storage objects to multi-functional and “smart” all-rounders. This goes along with an increased diversity in terms of design and the materials used – and high potential for composites that offer additional design freedom and exceptional mechanical properties at low weight.

Study provides overview of furniture market and unique selling points of composites
In order to systematically identify the potential of fiber-reinforced composites and to use them in future furniture applications, the AZL is starting a study together with companies from the furniture and composite industry. Within four and a half months the market for furniture will be segmented, design and technology trends will be identified and the technical requirements for furniture and furniture components will be broken down to identify applications with high potential for composites. The overall goal is to understand the selection process and needs of the furniture designer in order to bring composites to the market as a targeted alternative to conventional materials.

Virginia Bozsak, Technical Manager Composites at ARKEMA Innovative Chemistry is participating in the study: “The ever-growing population number requires environmentally friendly material and a solution for the end of life treatment to recollect and reuse materials. For fast changing markets such as the furniture market, these materials also need to offer an enormous freedom of design. Arkema already answers this demand with the only liquid thermoplastic resin Elium® used as a thermoset resin to produce composite structural or aesthetical parts. With the joint study, we aim to identify specific applications in the furniture market to make use of material which is not limiting creativity or design specifications but rather enabling the future to be revolutionized.”

 

Carl Meiser GmbH&CoKG expandiert am Standort Albstadt (c) Carl Meiser GmbH&CoKG
Visualisierungen Investitionsobjekt
22.08.2018

Carl Meiser GmbH&CoKG invests in an Innovation Center in Albstadt/Germany.

With an investment in an Innovation Center with testing labs and additional production facilities, Carl Meiser GmbH&Co KG gives a clear statement to it’s location in Albstadt in Central Europe. As well this underlines the know-how and the motivation of the whole team. The constructions were already launched. The first buildings for production and a part if the Innovation Center will be ready end of this year. State of the art offices and social facilities will be ready to move in mid of 2019.

“After our suffered setback with the fire in our production facilities in November 2017, this investment will move us much more forward and will give us the motivation to offer our customers even better and more innovative service and products. In long-term view this will creates the base for further growth”, says Jens Meiser CEO of Carl Meiser GmbH&Co.KG. During the last months we already invested in production technology and machines. During the last weeks we changed the complete production organisation to reach a lean product flow.

With an investment in an Innovation Center with testing labs and additional production facilities, Carl Meiser GmbH&Co KG gives a clear statement to it’s location in Albstadt in Central Europe. As well this underlines the know-how and the motivation of the whole team. The constructions were already launched. The first buildings for production and a part if the Innovation Center will be ready end of this year. State of the art offices and social facilities will be ready to move in mid of 2019.

“After our suffered setback with the fire in our production facilities in November 2017, this investment will move us much more forward and will give us the motivation to offer our customers even better and more innovative service and products. In long-term view this will creates the base for further growth”, says Jens Meiser CEO of Carl Meiser GmbH&Co.KG. During the last months we already invested in production technology and machines. During the last weeks we changed the complete production organisation to reach a lean product flow.

As well Meiser expanded it’s apprenticeship programme during the last years. At the moment we apprentice new staff members in three different education programmes. It is planned to add a fourth in management in future.

The company Carl Meiser GmbH&Co.KG with it’s brand „MEISER – Know How in textiles“ delivers to the high end underwear and lingerie industry as specialised dyehouse for knitted fabrics. With the brand “NOPMA technical textiles” the company acts as a fast growing development and production partner for the aviation, automotive and furniture industry as well the protection fabric industry. For this industries coated fabrics are developed and delivered to the markets. “In this sector we grow continuous during the last years. We are convinced that our investment in the Innovation Center will support this growth next to our first presence as exhibitor on the fair Techtex in 2019”, says Jens Meiser.

In the approval phase the company was supported by the city of Albstadt in all necessary questions. Fast and possible solutions were found. This shows the Mittelstands-friendly climate in this region in south Germany. The invest is supported by the national programme “Spitze auf dem Land” by the country of Baden-Württemberg and the EU.

More information:
Carl Meiser
Source:

Carl Meiser GmbH&CoKG

Belgium, Czech Republic, Germany and Taiwan Pavilions to join Cinte Techtextil China (c) Messe Frankfurt (HK) Ltd
15.08.2018

Belgium, Czech Republic, Germany and Taiwan Pavilions to join Cinte Techtextil China

From 4 – 6 September, leading innovations and technologies from around the world will feature in the Shanghai New International Expo Centre for Cinte Techtextil China 2018. With a growing technical textile market in China and Asia, big industry names will come to showcase new products. The Belgium, Germany and Taiwan Pavilions are predicted to draw a crowd with their return, while the Czech Republic Pavilion makes its debut appearance.

From 4 – 6 September, leading innovations and technologies from around the world will feature in the Shanghai New International Expo Centre for Cinte Techtextil China 2018. With a growing technical textile market in China and Asia, big industry names will come to showcase new products. The Belgium, Germany and Taiwan Pavilions are predicted to draw a crowd with their return, while the Czech Republic Pavilion makes its debut appearance.

Fresh innovation from the Taiwan Pavilion
The Taiwan Pavilion lives up to its reputation as one of the leading sources of industry innovation. Ten exhibitors in the Taiwan Pavilion will showcase a variety of innovations ideal for a number of industries. With advances in medical and hygiene product technologies, exhibitors Web-Pro Corporation will offer protective cover-all materials that resist pathogens and micro-organisms and multi-layered PE films for hygiene products, while Kae Hwa Industrial will introduce their developments in materials that protect against viruses. Four Elements Energy Biotechnology will showcase their multi-functional Masterbatch product, a unique FDA-qualified, anti-mildew and transparent plastic additive that repels bacteria.

Other exhibitors to watch out for in the Taiwan Pavilion include Ritex Machinery, who will display their Air Through machinery which can be applied to nonwoven fabrics for hygienic, medical and filtration uses. Everlight Chemical Industrial’s Evereco® adhesives introduce an eco-friendly solution with heat-resistance and other resilient properties. Also offering eco-friendly alternatives is TomLong Techstile and their TPU coated fabrics, ideal for waterproof and inflatable products.

Productivity and efficiency at the German Pavilion
Following high demand in the Chinese market, the German Pavilion returns with around 30 exhibitors, showcasing their expertise in efficiency in textile production. Highlights include Baumüller Nürnberg’s modular concepts and intelligent automations which allow flexible reactions to changeable market requirements. Edelmann Technology brings new high speed winder systems for increased production rates and new concepts for reducing contamination in products. ISRA Surface Vision will present 100% inline optical surface inspection methods for quality control and process optimisations. Another product to watch out for is Kufner’s xShield®, a lightweight, soft textile with 99% shielding efficiency against electromagnetic radiation.

Other big names in the German Pavilion include Autefa Solutions, Brückner Textile Technologies, Dornier Lindauer, IBENA, J.H. Ziegler, Kufner, Perlon and more.

Belgium Pavilion returns along with a Czech Republic debut
Organised by Fedustria (Belgian Textile, Woodworking and Furniture Industry Federation), the Belgium Pavilion will include textile recycling company Belrey Fibres, engineered fabrics by Pennel & Flipo for marine and rescue industries, as well as leading coating specialists Vetex who will feature a variety of functional tapes, and R&D institute Centexbel who carry out research projects across the entire textile and polymer production chain.

The new Czech Republic Pavilion organised by ATOK, the Association of Textile-Clothing–Leather Industry, will showcase three exhibitors who will provide solutions for technical yarn, fabric processing and nonwoven fabrics. These include: GF Machinery, showcasing R&D and production of special machines and lines for glass / basalt yarn and fabric processing; Retex’s nonwoven needle-punched and air laid textiles; and STAP, Europe’s biggest manufacturer of narrow fabrics.

The Cinte Techtextil China fair is recognised by European manufacturers as a gateway to the Asian market. With investment from China boosting the technical textile industry, and more Asian countries than ever developing their technical markets, Cinte Techtextil China 2018 is set to be a hub of business potential.

 

 

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd

09.04.2018

Heimtextil India and Ambiente India 2018 launch Bespoke Living in their fifth edition

  • Special display arena will showcase exquisite signature collections from interior décor and home textile sectors

India’s premium fairs for home textiles, homeware and interior décor, Heimtextil India and Ambiente India have launched Bespoke Living, an exclusive product showcase space dedicated to companies dealing with signature collections at Pragati Maidan, New Delhi from 27th – 29th June 2018.

With four successful editions in a row, Heimtextil India and Ambiente India also slated on the same dates, have become the country’s leading business trade fairs to showcase the finest quality of dining, living, giving and home textiles. The launch of Bespoke Living aims to highlight one of a kind brands who deal with uniquely crafted designs that will range from plush statement pieces to extensive signature collections for home and retail furnishing.

  • Special display arena will showcase exquisite signature collections from interior décor and home textile sectors

India’s premium fairs for home textiles, homeware and interior décor, Heimtextil India and Ambiente India have launched Bespoke Living, an exclusive product showcase space dedicated to companies dealing with signature collections at Pragati Maidan, New Delhi from 27th – 29th June 2018.

With four successful editions in a row, Heimtextil India and Ambiente India also slated on the same dates, have become the country’s leading business trade fairs to showcase the finest quality of dining, living, giving and home textiles. The launch of Bespoke Living aims to highlight one of a kind brands who deal with uniquely crafted designs that will range from plush statement pieces to extensive signature collections for home and retail furnishing.

The term luxury décor is not restricted to brand names anymore. With trends like fully furnished luxury houses, theme dominated homes and tastefully designed retail showrooms rapidly picking up in the country, consumers are open to different styles and unique designs.
Be it the very popular Scandinavian themed houses to colourful cultural artefacts creating a soothing aura, Indians now want their homes and businesses to reflect their personal style with statement interiors.

Halls dedicated to Bespoke Living will feature selected designer brands from India and around the world showcasing their premium collections. This product showcase arena will be beneficial for interior designers, architects, hotel buyers, buyers of luxury goods and luxury homes developers. Business visitors can gain knowledge about the upcoming trends, source timeless pieces, build new connections with people sharing the same interest and experience the quality of the products in person. Exposure to best in class products and latest trends presented here will help them create a better home design experience for their clients.

Excelling in statement leather pieces the brand Three Sixty will showcase their latest leather collection that comprises of rugged travel accessories and signature furniture pieces. Inspired by the world’s deserts and explorers who traversed them, the brand designs fully customisable handmade products which are available in beautiful shades of tan, sure to up the sophistication quotient of home and retail interiors.     
        
“Our latest collection at Bespoke Living will showcase our ever evolving tastes and designs. We believe luxury need not be synonymous with breaking open the bank. Traditional Indian craftsmen can craft the most beautiful signature pieces and provide quality beyond compare, shared Mr Vikash Gupta, CEO, Three Sixty. International exhibitors present at the show will showcase exquisite artefacts like decorative ceramics with glaze, handmade clay wreaths with metal leaves, ceramic vases and other decorative items to make every home unique.

Apart from this specially curated design platform, Heimtextil India and Ambiente India 2018 will host the Interior Lifestyle Awards that will bring creative masters from the interior decor and home textile sectors together by recognising their art and giving them an international platform to showcase their designs.
The trade fair will also organise the Hospitality Day, a hospitality and retail procurement programme that will bring top class purchase managers from the industry to build new contacts and source quality products. Together, Heimtextil India and Ambiente India together will host over 100 companies from countries like India, Indonesia, Switzerland and Thailand showcasing trendsetting designs in the interior décor and home textile industry.

Source:

Messe Frankfurt

Intertextile Shanghai, Taiwan Pavillion (c) Messe Frankfurt
26.02.2018

Largest range of exhibitors from Asia awaits at Intertextile Shanghai Apparel Fabrics

For buyers that prioritise having the widest range of sourcing options in one place, their best bet is March’s Intertextile Shanghai Apparel Fabrics. Boasting pavilions from Japan, Korea, Pakistan and Taiwan, individual exhibitors from Hong Kong, India, Indonesia and Vietnam, not to mention 2,800-plus Chinese exhibitors, the fair is the largest gathering of Asian suppliers under one roof for the spring / summer sourcing season. To ensure convenience for buyers, international exhibitors are grouped by country or region, while Chinese exhibitors are located in product halls including fabrics for casualwear, functional wear / sportswear, ladieswear, lingerie & swimwear, shirting and suiting, as well as for accessories and denim.

In total, around 3,300 exhibitors will showcase their apparel fabrics and accessories at the fair, with the SalonEurope zone hosting premium suppliers from Europe – including pavilions and zones from France, Germany, Italy and Turkey – while the International Hall also houses other overseas exhibitors from the likes of Argentina, Australia, Peru the US and elsewhere.

For buyers that prioritise having the widest range of sourcing options in one place, their best bet is March’s Intertextile Shanghai Apparel Fabrics. Boasting pavilions from Japan, Korea, Pakistan and Taiwan, individual exhibitors from Hong Kong, India, Indonesia and Vietnam, not to mention 2,800-plus Chinese exhibitors, the fair is the largest gathering of Asian suppliers under one roof for the spring / summer sourcing season. To ensure convenience for buyers, international exhibitors are grouped by country or region, while Chinese exhibitors are located in product halls including fabrics for casualwear, functional wear / sportswear, ladieswear, lingerie & swimwear, shirting and suiting, as well as for accessories and denim.

In total, around 3,300 exhibitors will showcase their apparel fabrics and accessories at the fair, with the SalonEurope zone hosting premium suppliers from Europe – including pavilions and zones from France, Germany, Italy and Turkey – while the International Hall also houses other overseas exhibitors from the likes of Argentina, Australia, Peru the US and elsewhere.

Japan Pavilion keeps ‘Banshu-Ori’ tradition alive
Organised by the Japan Fashion Week Organization (JFW), the Japan Pavilion will house 22 exhibitors and also feature a Japan Trend Corner. After the immense popularity of this pavilion with buyers in previous editions, the organisers are in a good position to comment on the trends in the local market. “The now mature Chinese market tends to seek out very different types of products and purchase in smaller batches, which is a world away from the mass-production focus of the past,” JFW commented.

Included in this edition’s Japan Pavilion are three companies from the Nishiwaki region, which is famous for its ‘Banshu-Ori’, or Banshu weave. Banshu-Ori is a yarn-dyed fabric, woven into various patterns, such as checks and stripes, with yarns that are dyed before being woven by weaving machines. This tradition dates back to 1792, and will be showcased by Bon Co Ltd, Ueyama Orimono Corp and Kuwamura Co Ltd at the fair. Bon will showcase a range of new products using this traditional technique, including organic cotton fabrics, paper yarn fabrics and indigo items. Ueyama Orimono, which boasts Japan’s largest dyeing factory in Nishiwaki, designs its own fabrics in Tokyo, and will present cotton, cotton / linen and medium-thin yarn-dyed fabrics at the fair. Kuwamura will showcase fabrics based on 100% yarn-dyed cotton, as well as cotton and cotton-blend materials.

Taiwan Pavilion the place to find innovation
The Taiwan Pavilion, with over 40 participating companies, is a guaranteed source of innovation at the fair, with a number of exhibitors also offering eco-friendly options. Some of the highlights include:

  • Keen Ching Industrial: they will have a number of their patented KCC-branded zippers at the fair including a durable double-coil zipper, an invisible zipper with a movable retainer box, a track type water-repellent zipper, a curved metal zipper and more.
  • Handseltex Industrial: will showcase a wide range of products including lace, jacquard and mesh, made with the likes of organic cotton and recycled polyester with an eco-friendly production process.
  • Paltex: the company’s ‘From Waste to Yarn’ regeneration system involves turning waste fishing nets and plastic bottles from the ocean into polyester and nylon fabrics, membranes and trimmings.
  • Superwill: their unique gradient fabric combines specialty yarns and a special knitting process, and features a thickness that decreases from top to bottom. This design allows the fabric to be tailored to different garments.
  • Tri Ocean Textile: will feature its own DreamFel® high-performance filament polypropylene yarn which is lightweight, durable and environmentally friendly, and used in sports & outdoor apparel and outdoor furniture.

The Taiwan Pavilion will be full of innovative textile solutions again this edition
The Korea and Pakistan Pavilions round out the Asian offerings. Nearly 60 Korean exhibitors will showcase predominantly manmade, fancy, knitted, acetate woven, tricot, jacquard, faux leather and printed fabrics, as well as lace and embroidery, for ladieswear, while other members will feature fabrics for sportswear and outdoor wear. Those from Pakistan, meanwhile, will feature in the Beyond Denim hall and offer a wide range of denim products.  

In addition to Intertextile Shanghai Apparel Fabrics, four other textile fairs also take place at the National Exhibition and Convention Center: Yarn Expo Spring, Intertextile Shanghai Home Textiles – Spring Edition, fashion garment fair CHIC and knitting fair PH Value.

Source:

Messe Frankfurt