From the Sector

Reset
9 results
17.01.2023

ECHA adds nine hazardous chemicals to Candidate List

ECHA has added nine chemicals to the Candidate List because of their hazardous properties. They are used for example in flame retardants, paints and coatings, inks and toners, coating products, plasticisers and in the manufacture of textile, leather or fur and paper.

Entries added to the Candidate List on 17 January 2023:

  • 1,1'-[ethane-1,2-diylbisoxy]bis[2,4,6-tribromobenzene]
  • 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol
  • 4,4'-sulphonyldiphenol
  • Barium diboron tetraoxide
  • Bis(2-ethylhexyl) tetrabromophthalate covering any of the individual isomers and/or combinations thereof
  • Isobutyl 4-hydroxybenzoate
  • Melamine
  • Perfluoroheptanoic acid and its salts
  • reaction mass of 2,2,3,3,5,5,6,6-octafluoro-4-(1,1,1,2,3,3,3-heptafluoropropan-2-yl)morpholine and 2,2,3,3,5,5,6,6-octafluoro-4-(heptafluoropropyl)morpholine

Information on these substances' uses and reasons for inclusion on the Candidate List is available here.

 

ECHA has added nine chemicals to the Candidate List because of their hazardous properties. They are used for example in flame retardants, paints and coatings, inks and toners, coating products, plasticisers and in the manufacture of textile, leather or fur and paper.

Entries added to the Candidate List on 17 January 2023:

  • 1,1'-[ethane-1,2-diylbisoxy]bis[2,4,6-tribromobenzene]
  • 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol
  • 4,4'-sulphonyldiphenol
  • Barium diboron tetraoxide
  • Bis(2-ethylhexyl) tetrabromophthalate covering any of the individual isomers and/or combinations thereof
  • Isobutyl 4-hydroxybenzoate
  • Melamine
  • Perfluoroheptanoic acid and its salts
  • reaction mass of 2,2,3,3,5,5,6,6-octafluoro-4-(1,1,1,2,3,3,3-heptafluoropropan-2-yl)morpholine and 2,2,3,3,5,5,6,6-octafluoro-4-(heptafluoropropyl)morpholine

Information on these substances' uses and reasons for inclusion on the Candidate List is available here.

 

More information:
ECHA chemicals hazardous
Source:

European Chemicals Agency

31.10.2022

Cinte Techtextil China announces exhibitors for December Edition

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

  • TESTEX, an international, independent Swiss institute which specialises in the testing and certification of textile and leather products. The organisation is a founding member and official representative of the OEKO-TEX® Association, and will present their certification services at the fairground.
  • Cotton Council International (CCI) is a non-profit trade association that promotes US cotton fibre and manufactured cotton products, with their COTTON USA™ Mark. At this year’s fair they will showcase cotton spunlace fabric, wipes, kitchen tissues, facial masks, cosmetic removers, and more, with their products particularly applicable to Agrotech, Clothtech, Medtech, and Sporttech.
  • Graf + Cie AG is a subsidiary of the Rieter Group, and a leading supplier of clothing for carding and combs for combing machines in the short- and long-staple spinning industry. This year, the Swiss company will showcase stationary flats, and metallic card clothing for roller cards.
  • At the returning German Pavilion, buyers can source sought-after technical textiles and nonwovens that are renowned for their quality. The companies and expertise on display at this pavilion are endorsed by the Federal Republic of Germany, with several exhibitors highlighted below:
  • Brückner Textile Technologies GmbH & Co KG has developed machinery for the textile industry since 1949. Today, the company offers complete line systems for the dry finishing of both woven and knitted fabric, as well as for technical textiles, glass fibres, and floor coverings.
  • Perlon (Zhejiang) Co Ltd is part of a global group of companies that specialises in the manufacture of synthetic filaments, with factories in China, Germany, Poland, and the US. Their products have a diverse range of potential uses, largely categorised in the Agrotech and Indutech application areas.
  • IBENA Textilwerke GmbH produces various functional fabrics for Protech. At the fair, the company will be showcasing insulative, flame retardant (FR) textiles for firefighting and search & rescue services. Developed with DuPont™ aramid material, their FR properties will not diminish after washing or repeated use.

This year’s fair also sees the return of the Taiwan Zone. With support from the Taiwan Nonwoven Fabrics Industry Association, the area will showcase a range of industry leading nonwoven products and services, by brands such as KNH Enterprise, Nan Liu Enterprise, Unique Pretty Ind, and Web-Pro Corporation.

As a world’s largest manufacturer of technical textiles, China is home to a vast array of companies responsible for innovative products. Some domestic exhibitors to look out for are:

  • CTA Hi-Textiles Co Ltd, a high-tech enterprise controlled by China Textile Science Research Institute. In recent years, the company has developed several new textile composite materials, and their products are widely used in sectors such as national defence, policing and public security, medical protection, and engineering and manufacturing.
  • Sateri is one of the world’s largest producers of viscose fibre, with an annual capacity of 1.8 million metric tonnes. At their mills, they make yarn and fibre products applicable to sectors such as beauty, hygiene and personal care, medical, wipes, and protective wear.

To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations. Further information on Match Plus will be available at a later stage.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

(c) Baldwin Technology Company Inc.
Baldwin’s Rick Stanford and Fi-Tech’s Ian Mills kick off partnership with a handshake
03.10.2022

Baldwin Technology partners with Fi-Tech to represent textile finishing technologies

Baldwin Technology Co. Inc. and Fi-Tech Inc. join partnership to ensure service amid growing demand for sustainable solutions. Fi-Tech Inc. will represent Baldwin Technology Co. Inc.’s complete textile and nonwoven product lines as its sales agent in the U.S. and Canada.

Founded in 1972 and headquartered in Richmond, Virginia, Fi-Tech is an agency and distribution firm for textile and non-woven machinery. Its initial focus was on synthetic fibers and nonwovens and it has since expanded its portfolio to represent manufacturers of complete machines or technical components used in the production of nonwovens, synthetic fibers, polymer, textiles, converting, perforated products and tobacco processing. Fi-Tech also maintains a spare parts inventory for many of the companies it represents.

Baldwin Technology Co. Inc. and Fi-Tech Inc. join partnership to ensure service amid growing demand for sustainable solutions. Fi-Tech Inc. will represent Baldwin Technology Co. Inc.’s complete textile and nonwoven product lines as its sales agent in the U.S. and Canada.

Founded in 1972 and headquartered in Richmond, Virginia, Fi-Tech is an agency and distribution firm for textile and non-woven machinery. Its initial focus was on synthetic fibers and nonwovens and it has since expanded its portfolio to represent manufacturers of complete machines or technical components used in the production of nonwovens, synthetic fibers, polymer, textiles, converting, perforated products and tobacco processing. Fi-Tech also maintains a spare parts inventory for many of the companies it represents.

“With the increasing demand of Baldwin’s finishing technology, we needed to find the right partner for sales promotion in the U.S. and Canadian markets for knits, wovens and non-wovens,” said Rick Stanford, Baldwin Technology’s VP Global Business Development, Textiles. “Fi-Tech of Richmond, Virginia is the perfect partner. They are well established in the textile and non-wovens industry and their portfolio of principals provides excellent synergy with Baldwin’s precision spray and plasma treater systems.”

Baldwin’s solutions are used in a wide variety of fabrics from basic jersey and fleece with softening and anti-microbial finishes to technical fabrics such as outdoor gear, military, upholstery, automotive and industrial fabrics utilizing the latest in technical finishes such as DWR, soil release, flame retardants and insect repellent among others.

Source:

Baldwin Technology Company Inc. / Adduco Communications

19.06.2022

Stahl introduces Integra® - a toolbox of flame-retardant and performance coating technologies

Stahl announced the launch of its Integra® portfolio, a versatile toolbox that provides tailor-made, customer-orientated solutions under the umbrella of flame-retardant technology, protective surfaces, and protective coatings. The integrated, polymer-driven approach behind Integra® offers customers greater flexibility in terms of product development, helping them to achieve regulatory and environmental compliance while ensuring superior product quality and fabric integrity.

Stahl announced the launch of its Integra® portfolio, a versatile toolbox that provides tailor-made, customer-orientated solutions under the umbrella of flame-retardant technology, protective surfaces, and protective coatings. The integrated, polymer-driven approach behind Integra® offers customers greater flexibility in terms of product development, helping them to achieve regulatory and environmental compliance while ensuring superior product quality and fabric integrity.

The market for flame retardants and performance coatings is increasingly complex and subject to extensive – and often conflicting – demands and requirements. This includes increasingly stringent chemical industry legislation that limits flexibility regarding chemical and additive usage as well as growing expectations from stakeholders regarding environmental, social, and governance (ESG) factors.
 
With Integra®, Stahl offers a polymer-driven solution that builds upon the flame-retardant technology offered through Stahl’s Eagleban™ brand, which is enhanced by Stahl’s expertise in polymer-based technologies for protective coatings and surfaces. By using the proven polymer technology as its “backbone” while harnessing the other technologies in its toolbox, including specialty crosslinkers and other additives, Integra® can help customers solve complex challenges in a flexible, integrated way that goes beyond traditional additive-driven approaches.

More information:
Stahl Coatings flame retardant
Source:

Stahl Holdings B.V.

05.05.2022

Monforts at Techtextil showcasing its finishing and coating technologies

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

The Techtextil and Heimtextil Summer Special exhibitions, taking place together in Frankfurt from June 21-24, represent an opportunity for Monforts to showcase its finishing and coating technologies for two of its major markets – especially at a time when energy prices continue to soar for textile manufacturers in Europe.

Existing customers of Monforts include many manufacturers in the field of home textiles, as well as those making geotextiles, automotive fabrics and other functional materials – all of whom will be well represented in Frankfurt this June. Dedicated Montex lines have also been supplied to producers of airbags, flame retardant barrier fabrics and spacer fabrics, as well as high-temperature filter materials.

Energy prices are rising steeply everywhere and a particular emphasis for Monforts in Frankfurt will be on the energy and heat recovery that can be achieved with Montex stenters, through features such as better insulation of the treatment chambers or the MonforClean system, in which waste heat from the drying process is used to pre-heat the drying air resulting in a radical reduction in the conventional heat supply required compared to gas and thermal oil heating. The modular system for heat recovery can also be extended for exhaust air cleaning and odour elimination. Monforts can provide a range of further resource-saving and energy recovery options tailored to each individual line installation including modification of the heating source.

With the Qualitex 800 visualization software, all article-specific settings can be stored and the formulations for thousands of treatment processes called up again at any time. Individual operators can also personalise their dashboards with the most important machine functions and process parameters.

The Qualitex 800 system is available for the automatic and continuous operation of the company’s Montex stenters, as well as its Thermex continuous dyeing ranges, Monfortex shrinking systems and Montex®Coat coating units.

Monforts Montex®Coat coating units serve an equally diverse number of markets, including tents, tarpaulins and awnings, black-out roller blinds and sail cloth, automotive interior fabrics and medical disposables. Full PVC coatings, pigment dyeing or minimal application surface and low penetration treatments and solvent coatings (in explosion-proof conditions) with knife coating, roller coating or screen printing can all be accommodated with this system.

All of these very different materials require coating and finishing for maximum efficiency, using Monforts technologies which provide the ultimate in flexibility and the ability to switch quickly from one fabric run to the next, without compromising on the economical use of energy or raw materials.

The Monforts EcoApplicator offers further potential for sustainably achieving perfect finishes via a precise direct application system, as an alternative to conventional padding – where fabrics are immersed in a bath of the required finishing chemicals. It can significantly further reduce the energy and water required and finishes can be applied on just one side of the fabric, or both, and even separately on each side, to be sealed in place via different heating zones in the stenter.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

22.02.2022

Baldwin partners with Blutec S.A. de C.V. to serve Mexico’s textile industry

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin’s precision spray systems for finishing and remoistening use non-contact spray technology to provide optimal controlled coverage of the exact amount of liquids needed to achieve the specific characteristics of the fabric—saving customers time, money and valuable resources. Because only the required amounts of water and chemicals are applied, water consumption can be reduced by up to 50%, contributing to considerably improved productivity in the finishing process.
In addition, these solutions can process a wide range of low-viscosity water-based chemicals—such as softeners, antimicrobial agents, durable water repellents, flame retardants and more—for woven fabrics, knitted textiles and nonwovens.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

08.07.2021

ECHA: Candidate List updated with eight hazardous chemicals

Some of the newly added substances are used in consumer products such as cosmetics, scented articles, rubber and textiles. Others are used as solvents, flame retardants or to manufacture plastics products. Most have been added to the Candidate List because they are hazardous to human health as they are toxic for reproduction, carcinogenic, respiratory sensitisers or endocrine disruptors.

Companies must follow their legal obligations and ensure the safe use of these chemicals. They also have to notify ECHA under the Waste Framework Directive if their products contain substances of very high concern. This notification is submitted to ECHA’s SCIP database and the information will later be published on the Agency’s website.

Some of the newly added substances are used in consumer products such as cosmetics, scented articles, rubber and textiles. Others are used as solvents, flame retardants or to manufacture plastics products. Most have been added to the Candidate List because they are hazardous to human health as they are toxic for reproduction, carcinogenic, respiratory sensitisers or endocrine disruptors.

Companies must follow their legal obligations and ensure the safe use of these chemicals. They also have to notify ECHA under the Waste Framework Directive if their products contain substances of very high concern. This notification is submitted to ECHA’s SCIP database and the information will later be published on the Agency’s website.

Background
The Candidate List includes substances of very high concern that may have serious effects on our health or the environment. These substances may be placed on the Authorisation List in the future, which means that companies would need to apply for permission to continue using them. The Candidate List has now 219 entries – some of these cover groups of chemicals so the overall number of impacted chemicals is higher.
 
Under the REACH Regulation, companies may have legal obligations when their substance is included – either on its own, in mixtures or in articles – in the Candidate List. Any supplier of articles containing a Candidate List substance above a concentration of 0.1 % weight by weight has to give sufficient information to their customers and consumers to allow safe use.
 
Importers and producers of articles containing a Candidate List substance have six months from the date of its inclusion in the list (8 July 2021) to notify ECHA. Suppliers of substances on the Candidate List (supplied either on their own or in mixtures) have to provide their customers with a safety data sheet.
 
As of 5 January 2021, suppliers of articles on the EU market containing Candidate List substances in a concentration above 0.1% weight by weight must notify these articles to ECHA’s SCIP database. This duty comes from the Waste Framework Directive.
 
More information on these obligations and related tools are available here.

Source:

European Chemicals Agency

01.07.2021

Pulcra Chemicals achieves first Acquisition with Devan

Pulcra Chemicals, with headquarters in Geretsried (Germany) has announced its first acquisition in its history by acquiring fellow-industry player Devan.

Devan, with origins since 1977 and Belgian headquarters, is since 2013 owned by Pentahold (a Belgian private equity fund). Devan is known from its antimicrobial range BI-OME, its large sustainable track record with a.o. probiotics solutions, a wide range of recently introduced bio-based textile finishes and a long standing in Thermoregulation and Flame Retardants. Devan has offices in the UK, Portugal, the US and a team in Shanghai.

The acquisition price will not be disclosed.

Pulcra Chemicals, with headquarters in Geretsried (Germany) has announced its first acquisition in its history by acquiring fellow-industry player Devan.

Devan, with origins since 1977 and Belgian headquarters, is since 2013 owned by Pentahold (a Belgian private equity fund). Devan is known from its antimicrobial range BI-OME, its large sustainable track record with a.o. probiotics solutions, a wide range of recently introduced bio-based textile finishes and a long standing in Thermoregulation and Flame Retardants. Devan has offices in the UK, Portugal, the US and a team in Shanghai.

The acquisition price will not be disclosed.

Source:

Pulcra Chemicals

(c) Teijin Carbon Europe GmbH
19.05.2021

Teijin Carbon produces new thermoplastic PPS-Tape

Teijin Carbon Europe introduces a new thermoplastic carbon fiber tape (TPUD) based on PPS. The new Tenax™ TPUD with PPS matrix allows entry in new cost-sensitive markets while offering the typical TPUD advantages like high resistance to chemicals and solvents, low flammability, storage or shipping at room temperature and recyclability.  

Due to its flame retardant properties and low smoke emission, it can be used in interior applications of aircraft or rail vehicles, among others. The maximum continuous operating temperature is up to 220 °C. Very low water absorption, excellent creep resistance even at elevated temperatures and high dimensional stability round off the property portfolio of this new TPUD. It is therefore also suitable for demanding applications in the aerospace, oil & gas, sporting goods or industrial sectors, while remaining cost-effective. These properties make the product perfect for highly automated processing routes such as ATL or AFP in combination with overmolding for complex geometries. Production start for the Tenax™ TPUD with PPS matrix is the first quarter in 2021.

Teijin Carbon Europe introduces a new thermoplastic carbon fiber tape (TPUD) based on PPS. The new Tenax™ TPUD with PPS matrix allows entry in new cost-sensitive markets while offering the typical TPUD advantages like high resistance to chemicals and solvents, low flammability, storage or shipping at room temperature and recyclability.  

Due to its flame retardant properties and low smoke emission, it can be used in interior applications of aircraft or rail vehicles, among others. The maximum continuous operating temperature is up to 220 °C. Very low water absorption, excellent creep resistance even at elevated temperatures and high dimensional stability round off the property portfolio of this new TPUD. It is therefore also suitable for demanding applications in the aerospace, oil & gas, sporting goods or industrial sectors, while remaining cost-effective. These properties make the product perfect for highly automated processing routes such as ATL or AFP in combination with overmolding for complex geometries. Production start for the Tenax™ TPUD with PPS matrix is the first quarter in 2021.

For almost 10 years, unidirectional tapes (TPUD) have been manufactured from carbon fibers and thermoplastics in Heinsberg, Germany. The semi-finished products have so far been offered with PEEK or PAEK – and PPS is now added to the list of available matrixes. PPS allows a lower process temperature compared to PEEK or PAEK. For the industrial market in particular, increasing the production rate to make processes more cost-efficient is an opportunity.

Source:

Teijin Carbon Europe GmbH