From the Sector

Reset
142 results
FET-200LAB wet spinning system Photo: Fibre Extrusion Technology Limited (FET)
21.11.2022

FET wet spinning system selected for major fibre research programme

Fibre Extrusion Technology Limited (FET) of Leeds, England has installed a FET-200LAB wet spinning system at the University of Manchester which will play a major part in advanced materials research to support sustainable growth and development.

This research programme will be conducted by The Henry Royce Institute, which operates as a hub model at The University of Manchester with spokes at other leading research universities in the UK.

The Henry Royce Institute identifies challenges and stimulates innovation in advanced UK materials research, delivering positive economic and societal impact. In particular, this materials research initiative is focused on supporting and promoting all forms of sustainable growth and development.
These challenges range from biomedical devices through to plastics sustainability and energy-efficient devices; hence supporting key national targets such as the UK’s zero-carbon 2050 target.

Fibre Extrusion Technology Limited (FET) of Leeds, England has installed a FET-200LAB wet spinning system at the University of Manchester which will play a major part in advanced materials research to support sustainable growth and development.

This research programme will be conducted by The Henry Royce Institute, which operates as a hub model at The University of Manchester with spokes at other leading research universities in the UK.

The Henry Royce Institute identifies challenges and stimulates innovation in advanced UK materials research, delivering positive economic and societal impact. In particular, this materials research initiative is focused on supporting and promoting all forms of sustainable growth and development.
These challenges range from biomedical devices through to plastics sustainability and energy-efficient devices; hence supporting key national targets such as the UK’s zero-carbon 2050 target.

FET-200 Series wet spinning systems complement FET’s renowned range of melt spinning equipment. The FET-200LAB is a laboratory scale system, which is especially suitable for the early stages of formulation and process development. It is used for processing new functional textile materials in a variety of solvent and polymer combinations.

In particular, the FET-200LAB will be utilised in trials for a family of fibres made from wood pulp, a sustainable resource rather than the usual fossil fuels. Bio-based polymers are produced from biomass feedstocks such as cellulose and are commonly used in the manufacture of high end apparel. The key to cellulose and other materials like lyocell and viscose is that they can be recycled, treated and fed back into the wet spinning system for repeat manufacture.

Established in 1998, FET is a leading supplier of laboratory and pilot melt spinning systems with installations in over 35 countries and has now successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

Source:

DAVID STEAD PROJECT MARKETING LTD

31.10.2022

Cinte Techtextil China announces exhibitors for December Edition

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

  • TESTEX, an international, independent Swiss institute which specialises in the testing and certification of textile and leather products. The organisation is a founding member and official representative of the OEKO-TEX® Association, and will present their certification services at the fairground.
  • Cotton Council International (CCI) is a non-profit trade association that promotes US cotton fibre and manufactured cotton products, with their COTTON USA™ Mark. At this year’s fair they will showcase cotton spunlace fabric, wipes, kitchen tissues, facial masks, cosmetic removers, and more, with their products particularly applicable to Agrotech, Clothtech, Medtech, and Sporttech.
  • Graf + Cie AG is a subsidiary of the Rieter Group, and a leading supplier of clothing for carding and combs for combing machines in the short- and long-staple spinning industry. This year, the Swiss company will showcase stationary flats, and metallic card clothing for roller cards.
  • At the returning German Pavilion, buyers can source sought-after technical textiles and nonwovens that are renowned for their quality. The companies and expertise on display at this pavilion are endorsed by the Federal Republic of Germany, with several exhibitors highlighted below:
  • Brückner Textile Technologies GmbH & Co KG has developed machinery for the textile industry since 1949. Today, the company offers complete line systems for the dry finishing of both woven and knitted fabric, as well as for technical textiles, glass fibres, and floor coverings.
  • Perlon (Zhejiang) Co Ltd is part of a global group of companies that specialises in the manufacture of synthetic filaments, with factories in China, Germany, Poland, and the US. Their products have a diverse range of potential uses, largely categorised in the Agrotech and Indutech application areas.
  • IBENA Textilwerke GmbH produces various functional fabrics for Protech. At the fair, the company will be showcasing insulative, flame retardant (FR) textiles for firefighting and search & rescue services. Developed with DuPont™ aramid material, their FR properties will not diminish after washing or repeated use.

This year’s fair also sees the return of the Taiwan Zone. With support from the Taiwan Nonwoven Fabrics Industry Association, the area will showcase a range of industry leading nonwoven products and services, by brands such as KNH Enterprise, Nan Liu Enterprise, Unique Pretty Ind, and Web-Pro Corporation.

As a world’s largest manufacturer of technical textiles, China is home to a vast array of companies responsible for innovative products. Some domestic exhibitors to look out for are:

  • CTA Hi-Textiles Co Ltd, a high-tech enterprise controlled by China Textile Science Research Institute. In recent years, the company has developed several new textile composite materials, and their products are widely used in sectors such as national defence, policing and public security, medical protection, and engineering and manufacturing.
  • Sateri is one of the world’s largest producers of viscose fibre, with an annual capacity of 1.8 million metric tonnes. At their mills, they make yarn and fibre products applicable to sectors such as beauty, hygiene and personal care, medical, wipes, and protective wear.

To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations. Further information on Match Plus will be available at a later stage.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

Photo: EREMA
21.10.2022

EREMA: Circular economy for PET fibres

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

"With EREMA's VACUREMA® and INTAREMA® technology and PURE LOOP's ISEC evo technology, our company group already has an extensive range of machines for fibre and PET recycling applications. For ecologically and economically sound recycling, however, new technological solutions are needed to use the recycled fibres in higher-value end applications and to achieve a functioning circular economy," explains Wolfgang Hermann, Business Development Manager Application Fibres & Textiles, EREMA Group GmbH. The initial focus will be on PET, regarded as a key material for the production of synthetic fibres. The aim is to find recycling solutions that allow PET fibre materials to be prepared for reuse in PET fibre production processes. This is a significant step for the circular economy because PET fibres in textiles account for about two-thirds of the total volume of PET.

In this development work, the EREMA Group can build on existing know-how. Proven recycling technologies have been combined with a new IV optimiser. "This extends the residence time of the PET melt, which is particularly necessary in fibre recycling to efficiently remove spinning oils. Our recycling process also increases the IV value of the PET melt after extrusion back to the specific level that is essential for production of the fibre," explains Hermann. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

Fibre test centre with plant to test customers' materials
In order to accelerate development work, EREMA opened its own fibre test centre a few months ago, where a cross-company team is working on recycling solutions for fibre-to-fibre applications.

Source:

EREMA Gruppe

(c) DiloGroup
Needle Module Holder
13.10.2022

DiloGroup at India ITME 2022

DiloGroup will be attenting India ITME 2022 (December 8 – 13, 2022), an exhibition for the textile industry, which offers a central forum for dialogue within the textile production sector, including textile machine building, fibre production, ancillaries and accessories. For DiloGroup this event is a good oppportunity to inform customers and interested parties about new developments aimed at improving production technologies with a focus on needlefelts.

Focal points of the development work are:

DiloGroup will be attenting India ITME 2022 (December 8 – 13, 2022), an exhibition for the textile industry, which offers a central forum for dialogue within the textile production sector, including textile machine building, fibre production, ancillaries and accessories. For DiloGroup this event is a good oppportunity to inform customers and interested parties about new developments aimed at improving production technologies with a focus on needlefelts.

Focal points of the development work are:

  1. Intense Needling:
    The development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
  2. “Fibre Pulp Recycling”
    Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
    When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
  3. Additive nonwoven production
    The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses. It is also suited for uses in the sector of apparel and shoe production.
  4. “IsoFeed”-card feeding
    In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.
Source:

DiloGroup

Foto: (c) Starlinger & Co Gesellschaft m.b.H.
11.10.2022

Starlinger PET recycling lines in India: Bottle-to-fibre and bottle-to-bottle

Ganesha Ecopet Private Limited, a subsidiary of Indian PET recycling pioneer Ganesha Ecosphere Ltd., has recently opened its new Warangal facility under the brand name Go Rewise where it produces rPET for filament yarns and fibres, as well as for food-grade packaging.  

The company has installed two Starlinger PET recycling lines in its facility in Warangal, Telangana state. Ganesha Ecopet plans to supply the produced rPET granulates under its newly introduced brand enterprise Go Rewise. Launched under the umbrella of one of India's rPET industry leaders, Go Rewise is committed to supplying highest quality rPET products that are produced in a resource-efficient process.
One Starlinger recycling line, a recoSTAR PET 165 H-VAC, processes washed PET bottle flakes for the Go Rewise polyester filament yarn applications and reaches an output of approx. 14,000 tons per year. With the second Starlinger recycling line, Ganesha is producing food-grade rPET resins.

Ganesha Ecopet Private Limited, a subsidiary of Indian PET recycling pioneer Ganesha Ecosphere Ltd., has recently opened its new Warangal facility under the brand name Go Rewise where it produces rPET for filament yarns and fibres, as well as for food-grade packaging.  

The company has installed two Starlinger PET recycling lines in its facility in Warangal, Telangana state. Ganesha Ecopet plans to supply the produced rPET granulates under its newly introduced brand enterprise Go Rewise. Launched under the umbrella of one of India's rPET industry leaders, Go Rewise is committed to supplying highest quality rPET products that are produced in a resource-efficient process.
One Starlinger recycling line, a recoSTAR PET 165 H-VAC, processes washed PET bottle flakes for the Go Rewise polyester filament yarn applications and reaches an output of approx. 14,000 tons per year. With the second Starlinger recycling line, Ganesha is producing food-grade rPET resins.

Ganesha Ecosphere looks back on 30 years of experience in the PET recycling business and can be considered a role model regarding sustainable business activities. Founded in 1987, the company started out as a yarn processing facility. It was among the first companies in India to start reprocessing PET waste to manufacture recycled polyester staple fibre (RPSF) and recycled polyester spun yarns (RPSY) in 1994. By today, the group has established a large network of over 300 scrap vendors located across the country and operates four factories in India - two in Uttar Pradesh, one in Uttarakhand, and the recently opened one in Telangana. It also recently operationalised its first factory outside India in Nepal. With over 500 customers and exports to more than 18 countries, the company ranks among the largest rpet producers in India with 130,000 tonnes per year and currently recycles around 16 - 18 % of India's total PET waste.

Source:

Starlinger & Co Gesellschaft m.b.H.

Photo: FET
FET-103 Monofilament meltspinning system
10.10.2022

RHEON LABS: Fibre with unique strain-rate sensitive characteristics

RHEON LABS, a fast-growing materials technology company based in Battersea, London, has completed an extensive 6 month trial with FET, a world leader in laboratory and pilot meltspinning equipment. Backed by a £173,000 grant from Innovate UK for feasibility studies, RHEON LABS has further developed its RHEON™ technology, a reactive polymer that dynamically stiffens when subjected to force. The technology can control energy of any amplitude or frequency, from small vibrations to forces at ballistic-speeds and therefore has a wide range of applications.
 
This Innovate UK Smart Grant-backed project aims to develop a hyper viscoelastic fibre from RHEON™ which displays high strain-rate sensitive properties. Creating a fibre with unique strain-rate sensitive properties will be a world first. It will enable the creation of a 'breakthrough-generation' of stretch textiles that can actively absorb, dampen and control energy during movement, rather than simply acting as a spring.

RHEON LABS, a fast-growing materials technology company based in Battersea, London, has completed an extensive 6 month trial with FET, a world leader in laboratory and pilot meltspinning equipment. Backed by a £173,000 grant from Innovate UK for feasibility studies, RHEON LABS has further developed its RHEON™ technology, a reactive polymer that dynamically stiffens when subjected to force. The technology can control energy of any amplitude or frequency, from small vibrations to forces at ballistic-speeds and therefore has a wide range of applications.
 
This Innovate UK Smart Grant-backed project aims to develop a hyper viscoelastic fibre from RHEON™ which displays high strain-rate sensitive properties. Creating a fibre with unique strain-rate sensitive properties will be a world first. It will enable the creation of a 'breakthrough-generation' of stretch textiles that can actively absorb, dampen and control energy during movement, rather than simply acting as a spring.

For close-fitting activewear and sports bras, the ability to actively control muscle mass or soft tissue movement during exercise will be a game-changing advancement. It will allow brands to engineer garments that relax during everyday use but actively stiffen during exercise for improved support and performance.
The Innovate UK grant was awarded under the category of Hyper-Viscoelastic Fibre Extrusion for Textile Manufacture. Fibre Extrusion Technology Limited (FET) enabled the customer trials at its bespoke Fibre Development Centre in Leeds, England using its in-house FET-103 Monofilament meltspinning facilities, in harness with RHEON and FET technical operatives. The next phase will be to upscale the trials of preferred materials on RHEON’s own new FET-103 meltspinning line, with FET’s continued support and expertise on hand.
 
Creating a fibre with unique strain-rate sensitive characteristics could be as radical a change in the market as the initial introduction of stretch fibre with the launch of Lycra™. The textiles would have a multitude of beneficial properties and would provide significantly less compression in the garment than conventional materials, substantially improving user comfort, support and performance.

Source:

DAVID STEAD PROJECT MARKETING LTD

Photo Pixabay
16.09.2022

Euratex, EuroCoton, Edana, CIRFS and ETSA join forces for the European Textile Industry

The associations published a joint European textiles industry statement on the energy package claiming incisive actions with no further delay.
Here is the statement in full:

Last month, when gas wholesale prices reached the record level of 340€/MWh – triggering also sky-high electricity prices – the European textiles industry called on the European Union to adopt a wholesale price cap for gas, the revision of the merit-order principle in the electricity market, support for SMEs and a single European strategy. On 14 September 2022, on the occasion of the State of the Union address by President Von der Leyen, the Commission announced initiatives aimed at tackling the dramatic energy crisis that the Europe is facing.

We, the European associations representing the whole textiles’ ecosystem,  welcome these proposals by the Commission to change the TTF benchmark parameters and decouple the TTF from the electricity market and the revision of the merit-order principle for the electricity market, which is no longer serving the purpose it was designed for.

The associations published a joint European textiles industry statement on the energy package claiming incisive actions with no further delay.
Here is the statement in full:

Last month, when gas wholesale prices reached the record level of 340€/MWh – triggering also sky-high electricity prices – the European textiles industry called on the European Union to adopt a wholesale price cap for gas, the revision of the merit-order principle in the electricity market, support for SMEs and a single European strategy. On 14 September 2022, on the occasion of the State of the Union address by President Von der Leyen, the Commission announced initiatives aimed at tackling the dramatic energy crisis that the Europe is facing.

We, the European associations representing the whole textiles’ ecosystem,  welcome these proposals by the Commission to change the TTF benchmark parameters and decouple the TTF from the electricity market and the revision of the merit-order principle for the electricity market, which is no longer serving the purpose it was designed for.

We also welcome the proposal to amend the state-aid framework that, in our view, should include the textiles finishing, the textiles services and the nonwoven sectors as well as a simplification of the application requirements. Furthermore, we call for a uniform implementation across the EU.

However, we acknowledge that the Commission proposal lacks in ambition and – if confirmed – it will come at the cost of losing European industrial capacity and European jobs. Ultimately, Europe will remain without its integrated textiles ecosystem, as we know it today, and no mean to translate into reality the EU textiles strategy, for more sustainable and circular textiles products.

An ambitious and meaningful European price cap on the wholesale price of natural gas is absolutely necessary. Europe is running out of time to save its own industry. It is now time to act swiftly, decisively in unity and solidarity at European level. We understand a very high price cap has been so far discussed among Ministries and that is not reassuring for companies across Europe: if any cap is, as expected, above 100/MWh, these businesses will collapse.

Already in March 2022, with EU gas wholesale prices at 200€/MWh, the business case for keeping textiles production was no longer there. To date, natural gas wholesale prices have reached the level of 340€/MWh, more than 15 times higher compared to 2021! Currently, many businesses have suspended their production processes to avoid the loss of tens of thousands of euros every day. We hope this will not become the new normal and – to reduce the likelihood of such a scenario – we call on the Commission, the EU Council and the Parliament to swiftly adopt decisive, impactful and concrete actions to tackle the energy crisis and ensure the survival of the European industry.

Given the dire international competition in which the EU textiles industry operates, it is not possible to just pass on the increased costs to consumers. Yet, with these sky-high prices, our companies cannot afford to absorb those costs. The EU textiles companies are mainly SMEs that do not have the financial structure to absorb such a shock.  In contrast with such reality in Europe, the wholesale price of gas in the US and China is 10€/MWh, whereas in Turkey the price is 25€/MWh. If the EU does not act, our international competitors will easily replace us in the market, resulting in the de-industrialisation of Europe and a worsened reliance on foreign imports of essential products.

Specific segments of the textile industry are particularly vulnerable:

  • The man-made fibres (MMF) industry for instance is an energy intensive sector and a major consumer of natural gas and electricity in the manufacturing of its fibres. Not only is it being affected by higher energy process, it is also experiencing shortages and sharply rising costs of its raw materials.
  • For the nonwovens segment, production processes – which use both fibres and filaments extruded in situ – are also highly dependent on gas and electricity. Polymers melting and extrusion, fibres carding, web-forming, web-bonding and drying are energy-intensive techniques. Nonwoven materials can be found in many applications crucial to citizens like in healthcare (face masks) or automotive (batteries).
  • It also is to be noted that for some segments the use of gas has no technological substitute: for example, the dyeing and finishing production units make very intense use of gas. These production units are mainly composed by boilers and driers, which only work on gas and there is no alternative technology.
  • The textile services sector is also struggling: with the critical nature of the service they provide, they require a considerable amount of energy to keep services, particularly hospitals and care homes stocked with lifesaving material as well as clothing and bed linens for the patients themselves. Losing these businesses would cause a lack of clothing for healthcare professionals, including protective sanitary gowns for surgeons, nurses and doctors, uniforms including other forms of personal protective equipment.
Source:

Euratex

(c) Freudenberg
25.08.2022

Freudenberg at Fachpack 2022

Freudenberg Performance Materials (Freudenberg) is presenting its sustainable Evolon® product range for reusable technical packaging for highly-sensitive parts at Fachpack 2022 in Nuremberg, Germany from September 27-29. The microfilament textiles offer improved surface protection for molded plastic parts, painted parts and so-called class A parts, thus providing customers with significant savings potential.

Evolon® RE is the most sustainable product in the portfolio. It contains the highest percentage of recycled PET and has a smaller carbon footprint. The new Ultra Force range from Evolon® offers extremely high mechanical strength and eliminates the need for PVC in the transportation and protection of large, heavy parts. Freudenberg has developed the ESD range (electro-static discharge range) for the packaging of sensitive electronic components: it offers permanent electro-static discharging and its surface resistivity can be customized.

Freudenberg Performance Materials (Freudenberg) is presenting its sustainable Evolon® product range for reusable technical packaging for highly-sensitive parts at Fachpack 2022 in Nuremberg, Germany from September 27-29. The microfilament textiles offer improved surface protection for molded plastic parts, painted parts and so-called class A parts, thus providing customers with significant savings potential.

Evolon® RE is the most sustainable product in the portfolio. It contains the highest percentage of recycled PET and has a smaller carbon footprint. The new Ultra Force range from Evolon® offers extremely high mechanical strength and eliminates the need for PVC in the transportation and protection of large, heavy parts. Freudenberg has developed the ESD range (electro-static discharge range) for the packaging of sensitive electronic components: it offers permanent electro-static discharging and its surface resistivity can be customized.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

Photo: FET
02.08.2022

FET at Techtextil 2022: Principle theme was Sustainability

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

Fibre Extrusion Technology Limited (FET) of Leeds, England enjoyed another successful Techtextil in Frankfurt, with high quality enquiries from technical companies and organisations worldwide, but in particular from customers based in Europe.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET

(c) Freudenberg Performance Materials Holding SE & Co. KG
21.06.2022

Freudenberg endorses further products with ECO-CHECK label

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Healthcare applications
In the field of healthcare, the bio-based M 1714 wound pad with superior absorption for more challenging wounds has now been endorsed with the ECO-CHECK label. The dressing consists of a mix of bio-based fibers derived from natural sources and exhibits a smooth wound contact layer. The product has been evaluated for industrial compostability and conforms to ISO 13432.

Architectural applications
The sustainable TF 400 Eco F mesh fabric for textile architecture from Mehler Texnologies® now also bears the ECO-CHECK label. Its yarn is made of 100% recycled PET bottles and its characteristics are very similar to those of conventional mesh fabrics. In 2021, it was awarded first place by the Architectural Membrane Association (AMA) in the “product” category in recognition of its properties.

Shoes
In the shoe industry, the binder-free strobel insoles have been endorsed as particularly sustainable. They contain a high percentage of recycled green bottle flakes. Moreover, the insoles themselves are fully recyclable.

Filtration applications
The two layered, needle-punched nonwoven filter medium that has just been endorsed with the ECO-CHECK label has impressive sustainability characteristics. Made entirely of polyester, more than half the fibers consist of recycled material.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

(c) Trützschler Nonwovens & Man-Made Fibers GmbH
14.06.2022

Trützschler Man-Made Fibers presents OPTIMA systems for industrial yarns

Trützschler Man-Made Fibers introduces OPTIMA for IDY and expands the range of the OPTIMA extrusion systems by the industrial yarn (IDY) sector. In addition to OPTIMA for carpet yarns (MO40-C, MO40-E and TO40), variants for manufacturing (semi-)industrial multifilament yarns are now joining the line.

Since 2012, Trützschler has been developing and building high-performance extrusion lines for carpet yarns (BCF - Bulk Continuous Filament) and industrial/technical yarns made of polyester, polyamide and polypropylene. The market launch of the OPTIMA concept for BCF took place in 2019 and has established itself in the markets since then. OPTIMA was designed as a modular platform and now also includes solutions in the IDY (InDustrial Yarn) sector.

OPTIMA systems for industrial yarn (TEC-O40 and TEC-O80) impress with flexibility application and end product diversity. Both concepts offer a wide range of design options and can be tailored precisely to meet end product and the throughput requirements.

Trützschler Man-Made Fibers introduces OPTIMA for IDY and expands the range of the OPTIMA extrusion systems by the industrial yarn (IDY) sector. In addition to OPTIMA for carpet yarns (MO40-C, MO40-E and TO40), variants for manufacturing (semi-)industrial multifilament yarns are now joining the line.

Since 2012, Trützschler has been developing and building high-performance extrusion lines for carpet yarns (BCF - Bulk Continuous Filament) and industrial/technical yarns made of polyester, polyamide and polypropylene. The market launch of the OPTIMA concept for BCF took place in 2019 and has established itself in the markets since then. OPTIMA was designed as a modular platform and now also includes solutions in the IDY (InDustrial Yarn) sector.

OPTIMA systems for industrial yarn (TEC-O40 and TEC-O80) impress with flexibility application and end product diversity. Both concepts offer a wide range of design options and can be tailored precisely to meet end product and the throughput requirements.

OPTIMA enables the production of high-tenacity yarns for shoelaces, ropes and nets as well as low-shrinkage qualities for tire cords, truck tarpaulins and airbags. As the lines are modular, they can be quickly adapted to new market developments and end products.

Source:

Trützschler Nonwovens & Man-Made Fibers GmbH

(c) DiloGroup
13.05.2022

DiloGroup at Techtextil with nonwovens technology

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

The DiloGroup informs at Techtextil in Frankfurt (June 21 – 24, 2022) about new developments aimed at improving production technologies with a focus on needlefelts.

It becomes more evident that the textile industry comes into the focus of regulatory authorities who push respecting sustainability principles and who initiate a new body of laws. Hence all industrial sectors are requested to achieve savings in material and energy. The textile machine building, of course, plays an important role by seizing this initiative and offering solutions for fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big efforts to meet these challenges together with a circle of partner companies. In this regard focal points of the development work are:

  1. Intense Needling
    Needling per se is a mechanical production method with a high energy efficiency. For this reason, the development efforts of DiloGroup aim at producing nonwovens by “intense needling” instead of water entangling, even for light nonwovens made of fine fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This would result in a reduction of the environmentally relevant production costs; per annum to about 1/3 to 1/5 of current.
    Despite the prospective advantages of the mechanical intense needling method over the hydrodynamical, water entanglement is at the moment the most important production method for low area weights and highest production capacity and is also offered by the DiloGroup as general contractor in cooperation with partner companies.
  2. “Fibre Pulp Recycling”
    Fibrous material in nonwovens and particularly used clothes can be successfully recycled, if staple length can be conserved in the tearing process. In the classical tearing process, staple lengths are dramatically reduced and therefore these fibres can only be used as base material for inferior uses in thermal or acoustic insulation or in protective textiles, transportation or protective covers etc.
    When recycling textile waste in the context of the collection of used clothes, the so called “filament-saving” tearing using special tearing machines and methods must be used to produce fibres with longer staple lengths which can be fed to a nonwoven installation. Hence product characteristics can be better specified and controlled.
  3. Additive nonwoven production
    The additive production method of the “3D-Lofter” is especially suited for automotive parts with differently distributed masses; but there may also be potential for increasing uses in the sector of apparel and shoe production.
  4. “IsoFeed”-card feeding
    In the field of card feeding, the “IsoFeed” method offers great potential for a more homogeneous card feeding at the same time reducing the variation in cross-machine fibre mass distribution and thus the fibre consumption while conserving the end product quality.
Source:

DiloGroup

(c) Oerlikon
The new Staple Fiber Technology Center in Neumünster
13.05.2022

Oerlikon Polymer Processing Solutions at Techtextil 2022

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
Airbags have become an integral part of our everyday automotive lives. The yarns used in them are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technologies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants. And all this without any loss of function in any climate and anywhere in the world for the lifetime of the vehicle.

Buckle up!
Seat belts play a decisive role in protecting vehicle occupants. They have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments.

Invisible, but essential – road reinforcement using geotextiles
But it not just inside vehicles, but also under them, that industrial yarns reveal their strengths. Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demanding tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC – technological quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

New high-tech Staple Fiber Technology Center
Extending to around 2,100 m2, Oerlikon Neumag in Neumünster is home to one of the world’s largest staple fiber technology centers. As of now, these state-of-the-art staple fiber technologies are also available for customer-specific trials.

The focus during the planning and the design of the Technology Center was on optimizing components and processes. Here, special attention was paid to ensuring the process and production parameters in the Technology Center system could be simply and reliably transferred to production systems. Here, the fiber tape processing line is modular in design. All components can be combined with each other as required. And comprehensive set-up options supply detailed findings for the respective process for various fiber products.

The Technology Center is also equipped with two spinning positions for mono- and bi-component processes. The same round spin packs are used for both processes, characterized by excellent fiber quality and properties and meanwhile very successfully deployed in all Oerlikon Neumag production systems. Furthermore, the spinning plant is complemented by automation solutions such as spin pack scraper robots, for example.

More information:
Oerlikon Neumag Techtextil
Source:

Oerlikon

Freudenberg Experts meet Sustainability (c) Freudenberg Performance Materials
Sustainable seat covers padding material by FILC
11.05.2022

Freudenberg Experts meet Sustainability

Following their merger, Freudenberg Performance Materials, Low & Bonar, Mehler Texnologies® and Filc will be presenting their innovative solutions at a joint stand for the first time at this year’s techtextil exhibition in Frankfurt. The focus is on sustainability. Among the highlights are Evolon® RE, a microfilament textile for a wide variety of applications and markets, FILFLEX, a sustainable padding material for car seat covers, and the truck tarpaulin POLYMAR® 8556 ECO CF. Customers will find the world's leading manufacturer of technical textiles at Stand C51 in Hall 12.1.

Following their merger, Freudenberg Performance Materials, Low & Bonar, Mehler Texnologies® and Filc will be presenting their innovative solutions at a joint stand for the first time at this year’s techtextil exhibition in Frankfurt. The focus is on sustainability. Among the highlights are Evolon® RE, a microfilament textile for a wide variety of applications and markets, FILFLEX, a sustainable padding material for car seat covers, and the truck tarpaulin POLYMAR® 8556 ECO CF. Customers will find the world's leading manufacturer of technical textiles at Stand C51 in Hall 12.1.

Evolon® textiles made from recycled PET
With Evolon® RE, Freudenberg Performance Materials is presenting an even more sustainable version of its high-performance microfilament textiles. Evolon® RE is manufactured from an average of 70% recycled polyester, which the company makes by cycling post-consumer PET bottles in-house. Evolon® RE products are available for various applications such as technical packaging, in weights currently ranging from 80g/sqm to 300g/sqm. For high-tech wiping, lightweight Evolon® RE is now available starting from 30g/sqm. The material meets the needs of cleaning specialists for more sustainable wiping solutions. Evolon® RE offers the same high quality and material performance as all other Evolon® textiles.

Tarpaulins made from recycled raw materials presented by Mehler Texnologies®
When it comes to tarpaulins on trucks, both protection of the transport cargo and advertising for the transport company place high demands on the material. Mehler Texnologies® tarpaulin material ranks among the premium products for truck tarpaulins. The company is a pioneer in sustainable development and is showcasing POLYMAR® 8556 ECO CF. This unique material has a 25% share of recycled raw materials in the coating mass. In addition, the material is made with 100% R-PES yarns. The input materials undergo a complex separation and filtering process.

Sustainable padding material for automotive and furniture seat covers presented by FILC
FILFLEX is a soft and flexible padding layer made from nonwovens for automotive and furniture seat covers. It prevents leather from creasing and improves the dimensional stability of the seat covers. In terms of sustainability, its benefit is its 100% PET composition, making FILFLEX easy to recycle. FILFLEX offers customers easier handling during sewing and the seat covering process. End users benefit from the high seating comfort.

(c) Beaulieu International Group
05.05.2022

B.I.G. Yarns at Clerkenwell Design Week with carpet tile collections

B.I.G. Yarns has secured its debut spot at the return of Clerkenwell Design Week (24-26 May 2022) and will showcase its sustainable contract flooring to carpet makers, architects and designers.

B.I.G. Yarns’ polyamide-based collections are high-performing with a strong emphasis on elevating design through remarkable colour contrasts and patterns: from bulk continuous filament (BCF) to twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex.

Designers can tap into the Class 33 resilience and various comfort levels of its one-step 3Ply Resilya, Softitude, and new two-step ColorMind solutions to meet application requirements, as well as access monthly inspiration care of #CatchtheColor. ColorMind offers yarn diversity to support a new level of design sophistication in high-end carpet segments. The ColorMind colour bank features predefined colours, always in stock, meaning short lead times. Manufacturers can also benefit from customized lot sizes and bobbin length, creating even more flexibility and design freedom.

B.I.G. Yarns has secured its debut spot at the return of Clerkenwell Design Week (24-26 May 2022) and will showcase its sustainable contract flooring to carpet makers, architects and designers.

B.I.G. Yarns’ polyamide-based collections are high-performing with a strong emphasis on elevating design through remarkable colour contrasts and patterns: from bulk continuous filament (BCF) to twisted and heat-set yarns, one-colour to multi-colour, between 650 and 15000 dTex.

Designers can tap into the Class 33 resilience and various comfort levels of its one-step 3Ply Resilya, Softitude, and new two-step ColorMind solutions to meet application requirements, as well as access monthly inspiration care of #CatchtheColor. ColorMind offers yarn diversity to support a new level of design sophistication in high-end carpet segments. The ColorMind colour bank features predefined colours, always in stock, meaning short lead times. Manufacturers can also benefit from customized lot sizes and bobbin length, creating even more flexibility and design freedom.

B.I.G. Yarns continues to extend its ranges to reduce fossil-carbon in the industry and encourage greater product circularity. Its EqoCycle PA6 yarns incorporate recycled content originating from recycled and regenerated PA6 and are fully recyclable, improving resource efficiency and other environmental benefits throughout the value chain. Carpet tufters can also contribute to a sustainable future through less use of fossil resources and reduced greenhouse gas emissions with EqoBalance yarns. Both ranges offer the same high-quality performance as virgin-based yarns.

Source:

Beaulieu International Group / EMG

Photo: Ralph Koch for Mayer & Cie.
29.04.2022

Mayer & Cie. at the ITM

  • Turkish circular knitting market offers prospects in turbulent times

After a four-year, Covid-related break the German circular knitting machine manufacturer Mayer & Cie. is exhibiting with its Turkish representative Mayer Mümessillik (MMÜ) once more at the important International Textile Machinery Exhibition (ITM) in Istanbul. At Booth 713 in Hall 8, Mayer & Cie. will present three machines: the D4-2.2 X interlock machine, the OV 3.2 QCe for double jersey structures and the MV 4 3.2 II for single jersey fabrics. For the Mayer & Cie. and MMÜ team the focus will be on in-person contacts with customers, suppliers and partners. Despite the tense international situation both the manufacturer and its representative are positive about the medium-term outlook for the Turkish market.

  • Turkish circular knitting market offers prospects in turbulent times

After a four-year, Covid-related break the German circular knitting machine manufacturer Mayer & Cie. is exhibiting with its Turkish representative Mayer Mümessillik (MMÜ) once more at the important International Textile Machinery Exhibition (ITM) in Istanbul. At Booth 713 in Hall 8, Mayer & Cie. will present three machines: the D4-2.2 X interlock machine, the OV 3.2 QCe for double jersey structures and the MV 4 3.2 II for single jersey fabrics. For the Mayer & Cie. and MMÜ team the focus will be on in-person contacts with customers, suppliers and partners. Despite the tense international situation both the manufacturer and its representative are positive about the medium-term outlook for the Turkish market.

Turkey is a market with prospects
“The challenges that the global economy faces are at present enormously wide-ranging, of course,” says Mayer & Cie.’s Turkey specialist Stefan Bühler. “The Russian invasion of the Ukraine, supply chain outages, shortages of raw materials and skyrocketing energy prices all create uncertainty.” And then there is galloping inflation in Turkey and elections in 2023. Yet despite, and in part because of, this state of affairs Bühler and Kahraman Güveri, CEO of Mayer & Cie.’s Turkish representative MMÜ, hold a positive view of the market outlook for the years ahead. Large orders, especially for standard products, are on the increase, Kahraman Güveri explains. That leads to new investments, new companies and a growing demand for refurbished machines that then need to be replaced by new machines elsewhere. And former commission merchants are now enterprises in their own right.

“Apart from that, Turkey benefits from its proximity to Europe, transport routes are manageable,” says Stefan Bühler. “This location advantage attracts brand manufacturers who together with their orders bring new approaches, new designs and new technologies into the country.” And Turkey’s already very highly developed textiles sector benefits too. That, says Kahraman Güveri, is why one can be confident for the next few years, “at least for as long as nothing unforeseen happens”.

Established machines with that something special: OV 3.2 QCe for double jersey structures
The portfolio of machines that Mayer & Cie. is exhibiting at the ITM is tried, trusted and popular. The OV 3.2 QCe is a specialist for interlock fabrics and double jersey structures that it knits in both filament and synthetic fibre yarns. With a conversion kit the OV 3.2 QCe also qualifies as a producer of 8-lock structures, spacer fabrics and fine gauges. The machine is available in a choice of three frames: from open-width and industrial to giant frame. Stefan Bühler, regional sales manager for Turkey, has this to say: “Not for nothing has the OV 3. 2 QCe been one of our most popular machines for years. It is mainly used for sportswear and for leisure- and outerwear.” In Istanbul the OV 3.2 QCe on show will be a 30-inch, E40-gauge model.

D4-2.2 X for fine rib and interlock fabrics
The double-jersey D4-2.2 X is an obvious choice for knitting fine rib fabrics of up to E28 gauge. Spacer and interlock fabrics are also part of the machine’s established repertoire. And it can produce elastomeric plating in both cylinder and dial cam. No matter which of these tasks is assigned to the D4-2.2 X, it performs it with impressive productivity.

MV 4 3.2 II for flexibility in the single jersey sector
In the single jersey sector, the long-established German firm delivers a literally fine solution. The MV 4 3.2 II on show at the ITM knits to an E38 gauge. The machine can also be supplied for gauges from E14 to E60. It is, in addition, highly flexible, with a repertoire that ranges from piqué and double piqué to one-thread fleece and smooth single jersey.

Source:

Mayer & Cie.

(c) 2022, SSM
07.04.2022

Swiss Textile Machinery members at Techtextil

High-performance yarns now offer almost unlimited possibilities for replacing traditional raw materials in a vast range of technical applications. Often tailor-made, these filament yarns go way beyond the conventional idea of ‘textiles’ – finding new uses in sectors such as automotive, aviation, maritime, medical and construction, among many others.

Technical textiles are everywhere in our daily lives today, even if we may not always realize it. Some are in more obviously textile products, from sewing threads to artificial turf. But then, take cars as an example: modern vehicles are stuffed with parts made from sophisticated yarns. It’s common for producers of automotive parts now to send template material and requirement lists to Swiss Textile Machinery members, trusting their expertise and experience. Members operate development and testing centers with latest machine installations, where their experts devise customized solutions, as well as calling on the pure innovative spirit which is part of their DNA.

High-performance yarns now offer almost unlimited possibilities for replacing traditional raw materials in a vast range of technical applications. Often tailor-made, these filament yarns go way beyond the conventional idea of ‘textiles’ – finding new uses in sectors such as automotive, aviation, maritime, medical and construction, among many others.

Technical textiles are everywhere in our daily lives today, even if we may not always realize it. Some are in more obviously textile products, from sewing threads to artificial turf. But then, take cars as an example: modern vehicles are stuffed with parts made from sophisticated yarns. It’s common for producers of automotive parts now to send template material and requirement lists to Swiss Textile Machinery members, trusting their expertise and experience. Members operate development and testing centers with latest machine installations, where their experts devise customized solutions, as well as calling on the pure innovative spirit which is part of their DNA.

At the extremes
Technology drives applications beyond our current imagining in the case of Heberlein air splicers. Developed for a wide range of uses with high-strength technical fibers, they have no problems splicing aramid fibers up to 16’100 dtex, carbon up to 30’000 dtex, Dyneema up to 5’500 dtex, and glass up to 4’800 tex. Using compressed air, the splicers produce a tear-resistant, homogeneous splice of material without interfering knots.

Retech has the technology to achieve specifications for filament yarns, drawing and stretching fibers to perfection. Top heated godet rolls – many customized – are developed for high-performance fibers. Temperatures up to 400 °C can be achieved. Combining the right settings and wide speed ranges for each specific process results in unique end-products.

Fabric producers of high-end applications must avoid any quality risk. Yarn producers are well aware of this responsibility, so they use precision package winders for technical yarns, developed by Rieter’s subsidiary SSM. Taking yarns from ring twisting bobbins, its specialist finish winders can produce coarse-count technical yarns up to 50’000 dtex, offering a new level of flexibility and winding quality.

Lifestyle essentials
At first glance, motorists might fail to notice many of the technical yarns ‘hidden’ inside their cars. These products have functions such as providing stability with hardly any weight, or absorbing tensile forces at defined elongation. This kind of controlled elongation behaviour, for example, arises from the choice of textile material and the special construction of the yarns used.

Such specifications make twisting and cabling machines essential for the automotive industry. Saurer offers machines for the production of technical yarns made from a variety of feed materials in a very wide yarn count range. They are needed for vehicle products such as tire carcasses, toothed engine belts, seat belts, airbags and lorry tarpaulins.

Technical yarns also play a surprising role in our mobile devices. Tapping, scrolling and swiping are second nature for billions, with our phones and a plethora of other lifestyle essentials. Yet, how many people would know that the touch-sensitivity we take for granted on these screens is largely made possible by twisted glass fibers. Bräcker, part of Rieter’s components business, offers a selection of vertical sinter metal rings and nylon travelers for glass fiber twisting, so that mills can achieve high levels of productivity and quality.

Future unlimited
Automotive and communication technology are already important industries for Swiss Textile Machinery members, along with well-known technical textiles markets in sectors such as medical, transport and construction. Smart-wear is already noted as a field with significant potential. Naturally, members are constantly investigating other possibilities. Swiss textile machinery is already applied in energy (batteries), and plastics.

The Swiss Textile Machinery Pavilion will be at the Techtextil exhibition in Frankfurt, Germany, taking place from 21 to 24 June 2022.

01.04.2022

Rieter completes acquisition of the three Saurer businesses

With the takeover of the automatic winding machine business at the Uebach-Palenberg/Germany site with effect from April 1, 2022, Rieter has completed the acquisition of the three businesses from Saurer.

The acquisition of the automatic winding technology in the premium category completes Rieter’s ring and compact-spinning system and thus lays the foundation to further improve the company’s position in the staple fiber market segment.

The components businesses Accotex (elastomer technology for spinning machines) at the Muenster/Germany site and Temco (technology components for filament machines) at the Hammelburg/Germany site had already been acquired by Rieter as of December 1, 2021.

Rieter had announced the acquisition of the three businesses on August 16, 2021.

In total, the three businesses generated sales of EUR 142 million in 2020, the year of the COVID crisis. In 2019 and 2018, total sales amounted to EUR 235 million and EUR 260 million, respectively.

With the takeover of the automatic winding machine business at the Uebach-Palenberg/Germany site with effect from April 1, 2022, Rieter has completed the acquisition of the three businesses from Saurer.

The acquisition of the automatic winding technology in the premium category completes Rieter’s ring and compact-spinning system and thus lays the foundation to further improve the company’s position in the staple fiber market segment.

The components businesses Accotex (elastomer technology for spinning machines) at the Muenster/Germany site and Temco (technology components for filament machines) at the Hammelburg/Germany site had already been acquired by Rieter as of December 1, 2021.

Rieter had announced the acquisition of the three businesses on August 16, 2021.

In total, the three businesses generated sales of EUR 142 million in 2020, the year of the COVID crisis. In 2019 and 2018, total sales amounted to EUR 235 million and EUR 260 million, respectively.

The winding machine business with new machines will be assigned to the Business Group Machines & Systems, and the after-sales business will be assigned to the Business Group After Sales. The Accotex and Temco component businesses are managed by the Business Group Components.

Source:

Rieter Management AG

Oerlikon Barmag celebrates its 100th anniversary (c) Oerlikon Barmag
A look at the state-of-the-art assembly of a WINGS winder
30.03.2022

Oerlikon Barmag celebrates its 100th anniversary

  • Innovation begins with creativity
  • A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

  • Innovation begins with creativity
  • A pioneer of the manmade fiber industry

When the manmade fiber age began a century ago, a German company was responsible for the pioneering work involved. Barmag, established in 1922, was one of the world’s first companies to construct machines for the large-scale production of synthetic staple fibers. To this day, the leading manufacturer of manmade fiber spinning systems and texturing machines in Remscheid – a brand under the aegis of the Swiss Oerlikon Group since 2007 – has shaped technological progress in this sector; in future, with ever more innovations focusing on sustainability and digitalization.

Barmer Maschinenfabrik Aktiengesellschaft (Barmag) is founded in Barmen, located in the Bergische Land region, on March 27, 1922. The German and Dutch founders enter unchartered technological territory, one created as the result of a groundbreaking invention: in 1884, French chemist Count Hilaire Bernigaud de Chardonnet used nitrocellulose to produce the first so-called artificial silk, later known as rayon. The following decades see rapid development focusing on the search for synthetic textile fibers and their manufacturing technologies. As one of the first machine factories, Barmag battles its way through the eventful early years of the manmade fiber industry, the ‘Roaring Twenties’ and the Great Depression – and suffers the extensive destruction of its factories at the end of World War Two. Rebuilding is successful. With the unstoppable success story of purely synthetic plastic fibers such as polyamide, the company flourishes from the 1950s through to the 1970s, establishing sites in all international, for the textile industry at the time important, industrial regions and garnering prestige across the globe in the process. In the ups and downs of expansion, global competition and crises, Barmag reaches the very pinnacle of the market and becomes the preferred technological development partner for the manmade fiber industries in China, India and Turkey. The company has been a high-impact brand under the umbrella of the Oerlikon Group since 2007.

On the wings of innovation
Today, Oerlikon Barmag is a leading supplier of manmade fiber filament spinning systems and part of the Manmade Fibers Solutions business unit of the Oerlikon Polymer Processing Solutions Division. And our aspirations have not diminished: “The striving towards innovation and technological leadership has been, is and will always be part of our DNA”, emphasizes Georg Stausberg, CEO of Oerlikon Polymer Processing Solutions. In the past, this has been observable in such trailblazing innovations as the revolutionary WINGS generation of winders for POY in 2007 and WINGS for FDY in 2012. Currently, the focus of new and further developments is very much on digitalization and sustainability. Here, Oerlikon Barmag has – as one of the world’s first systems manufacturers – been implementing fully-networked smart factories for globally-leading polyester manufacturers since the end of the last decade. Within this context, digital solutions and automation are also helping to provide greater climate and environmental compatibility. This sustainability commitment is not only evidenced by the e-save label introduced for all products back in 2004: Oerlikon is endeavoring to also make all its sites carbon-neutral by 2030 and to acquire its energy exclusively from renewable sources. An ambitious target, whose achievement could be helped by the Oerlikon Barmag anniversary, states Georg Stausberg: “Innovation begins with creativity. And remembering the past provides plenty of motivation and inspiration for the future.”

(c) FET
FET-100 Series Melt Spinning System
13.03.2022

FET gearing up for Techtextil 2022

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

A major theme to be highlighted on the FET stand is Sustainability. The FET range of laboratory and pilot extrusion lines is ideally suited for both process and end product development of sustainable materials.

FET has successfully processed almost 30 different polymer types in multifilament, monofilament and non-woven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET