From the Sector

Reset
15 results
(c) Mayer & Cie. GmbH & Co. KG
05.07.2023

Mayer & Cie. draws positive balance on ITMA 2023

From circular knitting machines and braiders via upgrades to digital solutions, Mayer & Cie. presented at ITMA 2023 a wide range of solutions that make circular knitting machines and braiding machines even more durable and thereby more valuable, for which the long-established firm received a positive visitor response.

From machinery manufacturer to solution provider
Three circular knitting machines – a Relanit 3.2 HS, an SF4-3.2 III and the OVJA 2.4 EM – and an MR-15/18C/Single Deck braiding machine took up about half the floor space of Mayer & Cie.’s ITMA stand. That reflected the weighting of the trade fair presentation. Along with high-tech circular knitting and braiding products the Mayer & Cie. focus at this year’s ITMA was on solutions that increase the value and durability of its machines. Including the digital platform knitlink, the new Control 5.0 machine control system, the camera-assisted error recognition system knithawk, almost a dozen upgrade kits for existing machines and the new oiler system Senso Blue RS.

From circular knitting machines and braiders via upgrades to digital solutions, Mayer & Cie. presented at ITMA 2023 a wide range of solutions that make circular knitting machines and braiding machines even more durable and thereby more valuable, for which the long-established firm received a positive visitor response.

From machinery manufacturer to solution provider
Three circular knitting machines – a Relanit 3.2 HS, an SF4-3.2 III and the OVJA 2.4 EM – and an MR-15/18C/Single Deck braiding machine took up about half the floor space of Mayer & Cie.’s ITMA stand. That reflected the weighting of the trade fair presentation. Along with high-tech circular knitting and braiding products the Mayer & Cie. focus at this year’s ITMA was on solutions that increase the value and durability of its machines. Including the digital platform knitlink, the new Control 5.0 machine control system, the camera-assisted error recognition system knithawk, almost a dozen upgrade kits for existing machines and the new oiler system Senso Blue RS.

Trade fair debut for Mayer & Cie. braiding machine
Mayer & Cie. also exhibited a braiding machine at ITMA for the first time. The company has integrated the braiding division at is Albstadt headquarters since 2019. “Braiding machines are a part of textile machinery,” said Mayer & Cie. Managing Partner Benjamin Maye, “but we nevertheless saw presenting the MR-15/18C/SD braider at ITMA as an experiment – and are satisfied with the result. The machine attracted a great deal of attention and we were able to make interesting contacts.”

A positive conclusion on ITMA 2023
Expectations of this year’s ITMA were moderate, Benjamin Mayer said. “War, high energy prices, inflation and recession are the signs of the times. Not even an ITMA is going to change that.” In addition, there had been serious problems with the issue of visas that had made it impossible for many potential visitors to attend the trade fair.

The Mayer & Cie. management therefore judged its success not by the general demand but by the positive visitor feedback. “For us that was an indicator of our future competitiveness,” said CEO Benjamin Mayer, “and we can definitely be sure of that with our developments.”

Source:

Mayer & Cie. GmbH & Co. KG

(c) INNATEX
19.07.2022

INNATEX: Countdown to 50th international trade fair for sustainable textiles

The 50th INNATEX fair opens its gates to a Green Fashion trade audience from 29 to 31 July 2022 in Hofheim-Wallau, near Frankfurt. At this anniversary fair, over 200 labels will be exhibiting, a wide range of experts and organisations will be gathering, and elaborate features and facilities are planned for the Rhein-Main exhibition centre.

According to INNATEX project manager Alexander Hitzel, one highlight is the Community Area, which brings together a range of experts. In short lounge talks, they reveal insights into what they are currently working on and a dialogue format encourages personal discussion. Mirjam Smend, whom we know well from Greenstyle Munich, introduces her recently launched sustainability magazine, Pureviu, and facilitates the morning talks.

The 50th INNATEX fair opens its gates to a Green Fashion trade audience from 29 to 31 July 2022 in Hofheim-Wallau, near Frankfurt. At this anniversary fair, over 200 labels will be exhibiting, a wide range of experts and organisations will be gathering, and elaborate features and facilities are planned for the Rhein-Main exhibition centre.

According to INNATEX project manager Alexander Hitzel, one highlight is the Community Area, which brings together a range of experts. In short lounge talks, they reveal insights into what they are currently working on and a dialogue format encourages personal discussion. Mirjam Smend, whom we know well from Greenstyle Munich, introduces her recently launched sustainability magazine, Pureviu, and facilitates the morning talks.

Alongside standard bodies such as IVN and GOTS, which have taken part in INNATEX for many years, younger projects such as Fairmodel and the digital platform Retraced will be part of this special area. Fairtrade Germany, Femnet and the VDMD are to be found there too. Almost all of them are joining in with the Ask Me Anything dialouge format. Interested attendees can pre-book a slot of up to ten minutes for a personal discussion with the expert of their choice.

The supportive activities that had to be suspended during the pandemic are enjoying a comeback at this year’s summer fair: five newcomers to INNATEX designated DesignDiscoveries will be presenting their projects in another special area. Vegtus, from Barcelona, produces sneakers and other products from cactus leather. Natural textiles such as organic cotton are used by Lounge Cherie, a yoga fashion label.

Products for kids through to seniors, classics and streetwear, footwear and accessories
Nordlicht similarly relies on recyclable, renewable natural fibres for its outerwear, bags and accessories. The field of circular fashion is also served by the remaining two Design Discoveries. Both Nature is Future, with its handmade sneakers, and Freibeutler, with its functional rucksacks, make extensive use of recycled materials, while also paying due attention to broader sustainability aspects.

Regular INNATEX exhibitors include Lana, Chapati and Didymos, all of whom are also celebrating anniversaries. Labels such as Anokho with their colourful accessories in jacquard fabrics and Danish label Angel Circle with its plus-size fashion are exhibiting for the first time.

Source:

INNATEX / UBERMUT GbR

PREMIUM GROUP & JOOR present their first Hybrid Trade Fair Platform (c) Premium Exhibitions GmbH
09.06.2022

PREMIUM GROUP & JOOR present hybrid Trade Fair Platform

Premium Group and JOOR have renewed their partnership to power the SS23 PREMIUM and SEEK trade shows through JOOR’s digital platform, underpinning their belief in the power of a hybrid approach to wholesale.

From 7 - 9 July, buyers visiting the shows in Berlin will be able to learn more about and shop from exhibitors in a new hybrid way. Buyers can discover the full PREMIUM and SEEK portfolio of brands both in-person and online 24/7 by visiting JOOR Passport, JOOR's digital trade show destination.

Premium Group and JOOR have renewed their partnership to power the SS23 PREMIUM and SEEK trade shows through JOOR’s digital platform, underpinning their belief in the power of a hybrid approach to wholesale.

From 7 - 9 July, buyers visiting the shows in Berlin will be able to learn more about and shop from exhibitors in a new hybrid way. Buyers can discover the full PREMIUM and SEEK portfolio of brands both in-person and online 24/7 by visiting JOOR Passport, JOOR's digital trade show destination.

Premium Group unites its various show locations to one cosmos for SS23 at Messe Berlin. The PREMIUM and SEEK shows will be joined by two further components— The Ground is a D2C creative platform for brands and consumers to meet, connect, and collaborate through one-of-a-kind experiences, engaging content, and innovative products, while FASHIONTECH, features masterclasses and panel discussions from the fashion industry’s most brilliant minds. A calendar of content includes deep dives into strong, successful, and sustainable strategies. As part of the content offer, JOOR will facilitate a masterclass on ‘Digital Wholesale’ and a future-looking roundtable discussion with four leading fashion brands on the FASHIONTECH stage.

Throughout the duration of the show, in-person buyers and visitors will have the ability to shop via the Premium Group mobile app. By simply scanning a brand’s corresponding QR code, visitors will link to the brand’s custom profile on JOOR Passport and be able to shop collections directly on the platform. JOOR Passport will also extend the duration of the shows by up to three months, allowing brands to continue wholesale selling digitally outside the window of the physical show.

JOOR and Premium Group’s flexible hybrid format allows visitors and brands a seamless digital and physical introduction to each other and their collections, the opportunity to connect in an efficient, effective, and longer term way, and the convenience to shop the show 24 hours a day from anywhere in the world.

Brands participating include Drykorn, Closed, Bertoni of Denmark, Veja, Ecoalf, Wrangler and Absolut Cashmere.

Source:

Premium Exhibitions GmbH

(c) SHIMA SEIKI MFG., LTD
25.01.2022

SHIMA SEIKI to exhibit at Pitti Filati with flat knitting machine

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 90th edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the N.SVR®123SP computerized flat knitting machine as well as APEXFiz™ design software.

SHIMA SEIKI ITALIA S.p.A., Italian subsidiary of leading Japanese computerized knitting solutions provider SHIMA SEIKI MFG., LTD., will exhibit at the 90th edition of the Pitti Immagine Filati exhibition in Florence, Italy. Products exhibited will include the N.SVR®123SP computerized flat knitting machine as well as APEXFiz™ design software.

The N.SVR®123SP computerized knitting machine features a special loop presser bed, capable of producing hybrid inlay fabrics with both knit and weave characteristics. Demand for such novel fabrics are very high across a wide range of applications, from fashion apparel to sportswear, innerwear, outerwear, uniforms and other functional clothing, as well as home furnishing and technical textiles. Shown in 18G at the SHIMA SEIKI booth, N.SVR®123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible. An SVR®123SP machine in 14G with i-Plating option will also be on display at the booth of yarn spinner IAFIL S.p.A. as well.

APEXFiz™ is subscription-based design software that maintains the proven functions that have made SHIMA SEIKI’s SDS®-ONE APEX series design systems so popular with fashion designers. Installed on personal computers, those strengths are now enhanced with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. APEXFiz™ software supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

APEXFiz™ along with SHIMA SEIKI’s yarnbank™ digital yarn web platform are featured at a special section launched at the previous session of Pitti Filati no. 89 called Pitti Studios. Pitti Studios is a content production service that yarn companies exhibiting at Pitti Filati can use for their own promotion. Yarn companies provide a piece of yarn, which is digitized on yarnbank™ and used to simulate photorealistic fabric on APEXFiz™. This is then processed by a creative studio specializing in digital content to provide static and animated 3D virtual representations. The process shows how to use the latest DX tools to provide accurate representation of a finished garment without having to produce any fabric, converting the conventionally wasteful process of sample-making into a sustainable one.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio.

Source:

SHIMA SEIKI MFG., LTD

24.01.2022

JEC World 2022 postponed

After thorough consultation with the exhibitors and partners of the event, JEC Group has decided to postpone the 2022 edition of JEC World. The world’s leading composites event will now take place from May 3rd to 5th, 2022, at the same venue Paris Nord Villepinte, as well as online via the JEC World Connect digital platform.

JEC World gathers the whole value chain of the composite materials industry in Paris, France every year and is “the place to be” for composites professionals from all over the world. The event brings together not only all major global companies, but also innovative startups in the field of composites and advanced materials, experts, academics, scientists, and R&D leaders. JEC World is also the “festival of composites”, offering a unique showcase of what composites can offer to various application sectors, from aerospace to marine, from construction to automotive, and an unlimited source of inspiration for participants from these industries.

After thorough consultation with the exhibitors and partners of the event, JEC Group has decided to postpone the 2022 edition of JEC World. The world’s leading composites event will now take place from May 3rd to 5th, 2022, at the same venue Paris Nord Villepinte, as well as online via the JEC World Connect digital platform.

JEC World gathers the whole value chain of the composite materials industry in Paris, France every year and is “the place to be” for composites professionals from all over the world. The event brings together not only all major global companies, but also innovative startups in the field of composites and advanced materials, experts, academics, scientists, and R&D leaders. JEC World is also the “festival of composites”, offering a unique showcase of what composites can offer to various application sectors, from aerospace to marine, from construction to automotive, and an unlimited source of inspiration for participants from these industries.

“We are fully dedicated to supporting the composites industry and to fostering its development via our events and media activities. Exhibitors and partners are strongly supporting JEC World, their leading event and want to meet in person in 2022 to activate business, share knowledge and highlight innovations. Postponing from March to May is a way to offer improved conditions to satisfy the industry requirements for such a trade fair as JEC World”, says Eric Pierrejean, CEO of JEC Group.

The JEC World team has decided to postpone the event after conducting a survey of its exhibitors and partners, confirming that a large majority is in favour of the new dates in May. As already planned, for three days, the event will offer for the first time a digital platform, JEC World Connect, in parallel to the in-person event in Paris for an augmented digital experience. Even after the show, via the JEC Web TV, unique content will be available to extend the reach of the event.

“Our main concern is to create the best possible conditions for our participants for successful networking, inspiration and business success. With a postponement of eight weeks we can enable this and offer to the industry the event it deserves. Taking the decision now, after consultation of all exhibitors, was necessary to give them planning and preparation visibility,” adds Thomas Lepretre, VP Events, Sales and Operations.

Source:

JEC Group

06.01.2022

Messe Frankfurt cancels consumer goods fairs in January and February 2022

In view of the exponential worsening of the pandemic situation worldwide and the accompanying tightened travel and contact regulations, the consumer goods fairs Christmasworld, Paperworld, and Creativeworld are cancelled for January 2022 and Ambiente for mid-February 2022. The regionally-oriented trade fair Nordstil from 15 to 17 January 2022 in Hamburg will take place at the present time.

The easing of the pandemic situation that was still hoped for in December is no longer in sight. Instead, the situation is deteriorating worldwide with an enormous, unforeseeable dynamic. This extreme deterioration due to the spread of the Omicron virus in Europe and Germany currently makes it impossible for Messe Frankfurt, as organiser of the leading international trade fairs Christmasworld, Paperworld, and Creativeworld, as well as Ambiente, to keep their dates in Frankfurt at the end of January and in mid-February 2022.

In view of the exponential worsening of the pandemic situation worldwide and the accompanying tightened travel and contact regulations, the consumer goods fairs Christmasworld, Paperworld, and Creativeworld are cancelled for January 2022 and Ambiente for mid-February 2022. The regionally-oriented trade fair Nordstil from 15 to 17 January 2022 in Hamburg will take place at the present time.

The easing of the pandemic situation that was still hoped for in December is no longer in sight. Instead, the situation is deteriorating worldwide with an enormous, unforeseeable dynamic. This extreme deterioration due to the spread of the Omicron virus in Europe and Germany currently makes it impossible for Messe Frankfurt, as organiser of the leading international trade fairs Christmasworld, Paperworld, and Creativeworld, as well as Ambiente, to keep their dates in Frankfurt at the end of January and in mid-February 2022.

The four events, consisting of Christmasworld with its focus on seasonal and festive decorations, Paperworld and Creativeworld with their product ranges for paper, office supplies, stationery and hobby, craft and artists' requisites and Ambiente with its cross-sector range of products for the table, kitchen and housewares, furnishing and decorative accessories, home furnishing concepts, gifts and fashion accessories, are the recognised leading trade fairs in their sectors and open the trading year in their respective segments. Even in a reduced numerical form, the four trade fairs would still have been the leading events worldwide for their respective product segments.

However, the exponential increase in the number of infections worldwide in a very short period of time and the accompanying multitude of developments and decisions that are clearly outside the organiser's sphere of influence have led to a significant deterioration in the general conditions and necessary prerequisites for holding the four leading trade fairs as major events of international relevance at the end of January and in mid-February 2022 respectively. These developments include the classification of Germany as a high-risk area and the associated travel warnings and international and intercontinental travel restrictions in countries such as India, Japan and the United States, as well as the corresponding quarantine obligations. Equally important are the steadily rising infection figures and the accompanying urgent appeal, among others by the Robert Koch Institute and the expert council of the German Federal Government, to continue to reduce contacts to a minimum and to cancel all major events. At present, there are even further international fears that the critical infrastructure will not be maintained due to the highly contagious Omicron variant. The majority of exhibiting and visiting companies at Christmasworld, Paperworld, and Creativeworld as well as Ambiente are currently reacting to this overall situation with travel and trade fair attendance bans for reasons of duty of care towards their employees to protect them from health risks. The global willingness to travel is dropping enormously at the moment.

There are no plans to postpone the event. Detlef Braun, Member of the Executive Board of Messe Frankfurt, explains: "Since the trend-oriented order cycles of the international consumer goods industry require an annual event at the beginning of the year, a shift to the second half of the year would not meet the needs of the exhibiting companies and visitors."

Nordstil to be held in Hamburg from 15 to 17 January 2022
In the interests of the sectors involved, the planning and implementation of Nordstil from 15 to 17 January 2022 is not affected. This trade fair will take place in the Free and Hanseatic City of Hamburg at this time due to other general conditions for local implementation. However, the extremely volatile situation is continuously reviewed and assessed in close exchange with the relevant local authorities and industry partners.

Messe Frankfurt's digital platforms for business success
Messe Frankfurt has already been actively helping retailers to help themselves since 2019 with Nextrade, the first order and data management platform for the home and living sector, and Conzoom Solutions, an information platform for the global consumer goods sector. "A second year without appropriate ordering, inspiration and networking formats poses considerable and in some cases existentially threatening challenges for retailers worldwide," Braun explains. "With our digital offers, we are specifically supporting our partners in industry and trade in this volatile situation. In addition, we will continue to put all our energy and optimism into safe and promising trade fairs. Because there is no substitute for meeting in real life."

Information on the planning of the Frankfurt consumer goods fairs for 2023 will be announced at the beginning of February 2022.

Source:

Messe Frankfurt Exhibition GmbH

JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking © 2021 JEC Group
JEC World 2022
08.12.2021

JEC World 2022: 3 months to go

  • JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

  • JEC Group announces theme for JEC World 2022 and reaffirms global leadership in composites innovation, business and networking

JEC World, the leading global trade show dedicated to composite materials, their manufacturing technologies and application markets, will take place in Paris from March 8-10, 2022, under the theme Composites for a Sustainable World. JEC World 2022 will be the industry’s most awaited international face to face event after the long pandemic period. Exhibition space is already 98% booked, a clear demonstration of the industry’s commitment to meet and resume business. Those unable to join in person will be able to experience the show via the JEC World Connect digital platform.

“We are looking forward to welcoming our exhibitors, partners and visitors back to Paris to resume business and promote innovation,” comments Thomas Lepretre, VP Events, Sales and Operations of JEC Group. “JEC World will bring the composites industry together to showcase the sustainability benefits of composite materials to a global audience, and to provide a stimulating meeting-place for the industry to pursue its sustainability ambitions by exchanging knowledge, forging collaborations, and imagining new concepts to protect our environment.”

  • JEC World a unique get-together on sustainability throughout the product lifecycle
  • JEC World a real composites “think tank”
  • JEC World 2022 will demonstrate how sustainable thinking is at the heart of the innovative designs, technologies and business models driving the development of the next generation of composites applications.

Four conferences will be held over the three days, focusing on:

• Sustainability of Raw Materials for Composites: Fueling the Circular Revolution
• Rethinking Composite Materials Production: The Path to Sustainable Manufacturing
• Design for Circular Composite Products: Turning Waste, Recycling & Reuse into Opportunities
• Applications of Composite Materials for Circularity: Towards a Net-Zero World

Innovation is in JEC World’s DNA
One of JEC World’s objective’s is to promote the composites sector’s most innovative projects. More than 600 product launches are expected to be announced over the three days of the show, which will also feature JEC’s high-regarded innovation challenges and awards ceremonies :

• The JEC Composites Innovation Awards celebrate innovative global composite projects, as well as fruitful collaborations between different players in the value chain. Over more than 15 years, the JEC Composites Innovation Awards have highlighted collaborations between some 1,900 companies and recognized 203 creative projects. The winners will be announced on March 7th during a dedicated ceremony and their successful technologies will be on display throughout the show.

• The JEC Composites Startup Booster is the leading startup competition in the world of composites. In 2022, this competition will celebrate its fifth anniversary, with a special event to be organized onsite and the launch of a new “sustainability” award. And, with 20 finalists for 2022, it will recognize innovations with the greatest potential market impact and promote them to an influential audience of decision-makers. The finalists’ innovations will be displayed at JEC World’s “Startup Village.”

• For the first time, JEC World will host the 3rd edition of the SMC BMC Design Award organized by the European Alliance for SMC BMC. This international competition recognizes and promotes design excellence in the use of SMC and BMC materials. The theme of this edition is Sustainable Living, and the award is opento design students and young design professionals (less than 3 years of experience) living in Europe.

Source:

JEC Group

24.11.2021

PERFORMANCE DAYS cancelled in Munich on December 1-2, 2021

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

  • Focus now on digital fair platform

The PERFORMANCE DAYS team regrets having to cancel at short notice the physical edition of PERFORMANCE DAYS which was scheduled to take place on December 1-2, 2021 at the Messe München exhibition center. Right up until today, the event organizers of PERFORMANCE DAYS were in the final stages of preparations for the fair. The goal of being able to realize a fully booked fair with a portfolio like in pre-pandemic times seemed to be within reach. The political regulations agreed in Bavaria from November 19, 2021 and the heavily restricted constraints associated with an incidence of 1000 have far-reaching consequences for PERFORMANCE DAYS. As a result of the current sharp rise in the number of infections in Munich, the planned winter edition must now be cancelled as a precaution. The focus now is now completely on the digital fair on December 1 and 2, 2021.

The new measures are scheduled to come into effect in Munich from the middle of this week, which would lead to very short-term changes. The organizers of PERFORMANCE DAYS therefore see themselves in the responsibility to enable a minimum of planning security as well as a responsible handling of the given situation with this decision.

“Exceptional situations require exceptional decisions – making these all the more difficult. After experiencing a very successful and surprisingly well-attended fair with the Functional Fabric Fair by PERFORMANCE DAYS in Portland, Oregon last week, we have tried everything possible up to the last moment and firmly believed that we would finally set a further positive milestone with the physical edition of PERFORMANCE DAYS in Munich. We fulfilled all the requirements, updated our hygiene concept several times to comply with the dynamically changing measures and took all the necessary precautions for a safe event. Unfortunately, current developments do not allow us to host the trade fair event next week, since the undisputed top priority is the protection and health of our visitors. Now our focus turns to the full implementation of the Digital Fair on December 1 and 2, 2021”, explains Marco Weichert, CEO of PERFORMANCE DAYS

Focus on digital platform
The PERFORMANCE DAYS team is now investing all its efforts into implementing the Digital Fair on December 1 and 2, 2021. As part of THE LOOP, those interested have the opportunity as of now to view online the fabric innovations and news for the Winter Season 2023/24, this year’s Focus Topic “Sustainable Nylon” and the latest color trends. In the Marketplace, visitors will be able to view the numerous exhibitor products, including the PERFORMANCE FORUM’s curated sustainable fabric highlights. In order to present the fabrics to visitors as realistically as possible in terms of feel, design and structure in digital form, the PERFORMANCE FORUM has been equipped with new 3D-technology, including innovative tools such as 3D images, video animations and downloadable U3M files. Throughout the Digital Fair, exhibitors and fair visitors can look forward to extensive networking opportunities. For example, as part of the extensive digital supporting program on December 1, with various expert talks, discussion rounds and speakers via livestream, moderated by Charles Ross live from the studio. On December 2, the “sustain & innovate” conference on this year’s Focus Topic “The Sustainable Future of Nylon” will kick off with discussions and panels, moderated by Astrid Schlüchter, Editor-in-Chief of SAZsport and SPORTSFASHION by saz.  

A very special thank you goes out to the entire PERFORMANCE DAYS community with its exhibitors, visitors and partners for their active support, trust, loyalty and understanding in these still extraordinary times. The team looks forward to the Digital Fair on December 1 and 2, 2021 and further ahead to meeting you all personally on April 27 and 28, 2022 at the summer edition of PERFORMANCE DAYS live in Munich.

Source:

Performance Days

(c) JANDALI MODE.MEDIEN.MESSEN für CHIC
10.08.2021

CHIC Shanghai in October instead of August 2021

Instead of taking place from August 25-27 as originally planned, Asia's leading trade fair for fashion and lifestyle will now be held from October 9-11, 2021 at the National Exhibition and Convention Center in Shanghai. The fair has been taking place physically again since July 2020, always in compliance with strict safety and hygiene regulations. Various digital platforms are being set up in parallel.

The around 500 brands registered for CHIC (August) will now present themselves to the trade visitors in autumn on 62,000 sqm, including important industry players such as JINTIANSHI (menswear), VINI Bespoke (menswear), Zaijiu (womenswear), Jiebeidi (womenswear), COFNA (childrenswear), Laura Vita (shoes), Hattershub (headwear), MANNYLONQ (CHIC-Young Blood) and Dragon Heart (CHIC-Young Blood) and exciting up-and-coming designers such as KIMUSSO, Yujiantian and Wuma.

Instead of taking place from August 25-27 as originally planned, Asia's leading trade fair for fashion and lifestyle will now be held from October 9-11, 2021 at the National Exhibition and Convention Center in Shanghai. The fair has been taking place physically again since July 2020, always in compliance with strict safety and hygiene regulations. Various digital platforms are being set up in parallel.

The around 500 brands registered for CHIC (August) will now present themselves to the trade visitors in autumn on 62,000 sqm, including important industry players such as JINTIANSHI (menswear), VINI Bespoke (menswear), Zaijiu (womenswear), Jiebeidi (womenswear), COFNA (childrenswear), Laura Vita (shoes), Hattershub (headwear), MANNYLONQ (CHIC-Young Blood) and Dragon Heart (CHIC-Young Blood) and exciting up-and-coming designers such as KIMUSSO, Yujiantian and Wuma.

The expected 60,000 visitors are also able to attend seminars and workshops on current topics such as Recognition and new opportunities of new retail in AI Fashion or 2021 Maker of Silk Road & Innovation of Design Infinity -- The Innovation and Entrepreneurship Competition of China Textile & Apparel SME.

Next events:
CHIC Shenzhen | 3rd-5th November 2021 | Shenzhen
CHIC March 22 | 9-11 March 2022 | Shanghai

Source:

JANDALI MODE.MEDIEN.MESSEN

03.03.2021

CHIC Shanghai takes place on March 17 to 19, 2021

  • CHIC Shanghai, March 17 to 19, 2021 (due to new regulation to control the infection rate)
  • 905 exhibitors are present at CHIC
  • Parallel: CHIC ONLINE as a digital platform with upgrade of the CHIC
  • APP
  • CHIC GARDEN: puts fashion and sustainability in the limelight

The CHIC spring event takes place from March 17th to 19th under strict hygiene guidelines in the National Exhibition & Convention Center in Shanghai parallel to Intertextile Shanghai, Yarn Expo and PH Value.

The Chinese economy has recovered again after the pandemic in China and already reached pre-crisis level with 6.5% growth in the fourth quarter of 2020. McKinsey estimates are a 5 to 10% growth in sales in China in 2021 compared to 2019. Thanks to good sales in China, the fashion luxury brands in particular have been able to improve their sales figures. But also regarding online trade, Chinese ecommerce sales were in first place worldwide for the eighth year in a row. The average per capita income of consumers rose by 3.8% last year.

  • CHIC Shanghai, March 17 to 19, 2021 (due to new regulation to control the infection rate)
  • 905 exhibitors are present at CHIC
  • Parallel: CHIC ONLINE as a digital platform with upgrade of the CHIC
  • APP
  • CHIC GARDEN: puts fashion and sustainability in the limelight

The CHIC spring event takes place from March 17th to 19th under strict hygiene guidelines in the National Exhibition & Convention Center in Shanghai parallel to Intertextile Shanghai, Yarn Expo and PH Value.

The Chinese economy has recovered again after the pandemic in China and already reached pre-crisis level with 6.5% growth in the fourth quarter of 2020. McKinsey estimates are a 5 to 10% growth in sales in China in 2021 compared to 2019. Thanks to good sales in China, the fashion luxury brands in particular have been able to improve their sales figures. But also regarding online trade, Chinese ecommerce sales were in first place worldwide for the eighth year in a row. The average per capita income of consumers rose by 3.8% last year.

905 exhibitors and 932 brands will present themselves on site at CHIC. Around 95,000 trade visitors from all retail areas, including all relevant online sales platforms, are expected. The CHIC's online and live streaming events, which run parallel to the trade fairs, have recorded an average of 150,000 clicks on each show since April last year.

CHIC Garden
China is to become climate neutral by 2060, which of course also affects the fashion sector. Overall, the awareness of Chinese consumers has developed even more towards high-quality, sustainable collections. In their "State of Fashion 2021" report, McKinsey & BoF analyze the awareness development in China that consumers and producers are increasingly recognizing the importance of joint efforts by all participants in the value chain to work together in order to achieve sustainability in the fashion industry.

The CHIC flagship event visualizes this topic with the "CHIC Garden" theme. With the help of garden design experts, the fair is transformed into an inspiring garden paradise that reflects closeness to nature and the appreciation of natural resources.

As an exception, the CHIC autumn event, CHIC Shanghai will take place in August this year (25th to 27th August 2021).

Source:

JANDALI

03.03.2021

JEC WORLD 2021 postponed

  • Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

  • Next Jec World Will Take Place From March 8 To 10, 2022

The continued impact of the Covid-19 pandemic unfolding throughout 2021 has forced the JEC World team to reexamine the possibility of holding the next edition of JEC World this year. Thus, after thorough consultation of clients and partners, the JEC World team has decided to postpone the next edition of JEC World to March 8 to 10, 2022.

Amidst growing concern among our exhibitors and partners surrounding the critical situation of the Covid 19 restrictive measures and other limitations in place in many countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in the best conditions in 2022. Thus, JEC World exhibitors were asked to respond to a survey offering two new dates to determine which one would suit them the most. It appeared that 89% of respondents favored holding the next JEC World session from March 8 to 10, 2022.

“The coronavirus pandemic situation has taken the central stage, so in light of the current situation, it would not be possible for us to satisfy our customers’ requirements for such an international trade fair as JEC World in June. We truly regret having to make this difficult decision once again. However, we are all committed, starting today, to deliver the best JEC World experience to our clients in 2022.” says Eric Pierrejean, CEO of JEC Group. “While waiting for welcoming the international composites community back to Paris in March 2022, JEC Group team is preparing various online Rendez-Vous in June enabling the entire composites community to discover trends and innovations, and to connect″, he added.

The leading composites event will take place from March 8 to 10, 2022, at Paris Nord Villepinte (same venue) and online for a new augmented experience.

As the leading trade show of the composites industry, JEC World will bring together the whole composites materials value chain and professionals from application sectors, experts from the scientific and academic world, associations, and media from more than 112 countries, introducing in 2022 its audience its new digital platform, JEC World Augmented.

“JEC World 2022 and the augmented platform  will bring the international composites community and specialists together to resume business, network, hold business meetings. They will also have the chance to participate in conferences, workshops, and discover the latest composites innovations,” says Adeline Larroque, Show director and EMEA events.

Source:

JEC Group

03.11.2020

JEC WORLD announces new 2021 Dates

  • New digital platform unveiled
  • Due to the continued impact of the Covid-19 pandemic and after thorough consultation of clients and partners, the JEC World team today announces that the next edition of JEC World is postponed from March 9 to 11 to June 1 to 3, 2021.

With the growing concern among our exhibitors and partners surrounding the critical situation of the Covid  19,  travel  restrictions,  quarantine,  and  lockdown  measures  announced  recently  in  many  countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in safer conditions in 2021.

  • New digital platform unveiled
  • Due to the continued impact of the Covid-19 pandemic and after thorough consultation of clients and partners, the JEC World team today announces that the next edition of JEC World is postponed from March 9 to 11 to June 1 to 3, 2021.

With the growing concern among our exhibitors and partners surrounding the critical situation of the Covid  19,  travel  restrictions,  quarantine,  and  lockdown  measures  announced  recently  in  many  countries, the JEC World team has decided to work on a new timeline to hold the next edition of the event in safer conditions in 2021.

Thus, JEC World exhibitors answered a survey proposing three dates to determine which one would suit  them  the  most.  It  appeared  that  a  large  majority  of  respondents  favored  holding  the  next  JEC  World session from June 1 to 3, 2021."We truly regret having to make this difficult decision. However, we are all committed, starting todayto deliver the best JEC World experience to our clients.  We look forward to welcoming the international composites community back to Paris in June 2021", says Eric Pierrejean, CEO of JEC Group. As the leading trade show of the composites industry, JEC World brings together the whole composites materials  value  chain  and  professionals  from  application  sectors,  experts  from  the  scientific  and  academic world, associations and media from more than 112 countries.

JEC  World  is  also  proud  to  introduce  its  audience  this  year,  its  new  digital  platform,  JEC  World  Augmented.

This online platform, programmed to take place alongside JEC World,istailored primarily for attendees who cannot be present physically at the show but still want to experience a tremendousdigital event immersion. "JEC  World  and  its  augmented platform  will  bring  the  international  composites  community  and  specialists   together   to   network   with   exhibitors,   hold   digital   business   meetings,   access   online   conferences, workshops, and discover the latest composites innovation,"  says Adeline Larroque, Show director and EMEA events. "Now, more than ever, the international composites sector needs to come together to discuss today's challenges and tomorrow's composites solutions," adds Larroque.

Source:

JEC Group

Bemberg™ with Istituto Secoli for Milan Fashion Week © Tommaso Lazzarini
The students designed three women collections and two men collections interpreting the concept of SHAPE.
07.10.2020

Bemberg™ with Istituto Secoli for Milan Fashion Week

The Secoli Fashion Show, live this year on the Camera Moda digital platform, staged the projects of 19 students supported by exceptional companies such as Bemberg™ by Asahi Kasei, which supplied its precious and contemporary materials for the creation of some pieces of the collections.

During Milan Fashion Week the students of Istituto Secoli presented their projects for the traditional appointment of the Secoli Fashion Show, an event that this year has took place in digital version in a particular dedicated section - Italian Education Lab - live on the streaming platform of Camera Nazionale della Moda.

The students designed three women collections and two men collections interpreting the concept of SHAPE.

The Secoli Fashion Show, live this year on the Camera Moda digital platform, staged the projects of 19 students supported by exceptional companies such as Bemberg™ by Asahi Kasei, which supplied its precious and contemporary materials for the creation of some pieces of the collections.

During Milan Fashion Week the students of Istituto Secoli presented their projects for the traditional appointment of the Secoli Fashion Show, an event that this year has took place in digital version in a particular dedicated section - Italian Education Lab - live on the streaming platform of Camera Nazionale della Moda.

The students designed three women collections and two men collections interpreting the concept of SHAPE.

Brands of excellence supported the young creatives for the creation of the collections, such as Bemberg™ by Asahi Kasei, which provided the printed fabrics - produced by Tessitura Grisotto - for the creation of some pieces of the collections, that were used in particular for shirts and padded outerwear and quilted parts.
 
Bemberg™ is a fiber that comes from the smart and technologically advanced transformation of pre-consumer cotton linter materials and converted through a traceable and transparent process. Its uniqueness comes from its exceptional qualitative characteristics such as the magnificent touch - which is soft and smooth as silk, like a second skin - brilliance and radiance. Bemberg™ also has antistatic and breathable performances and the fiber is biodegradable and compostable too.

The collaboration with these companies is continuous and in the name of the close and interconnected relationship between education and the world of work. A support that is also reconfirmed for Asahi Kasei, who for years has supported the Istituto Secoli with an intense commitment in the field of education to new generations.

In addition to Istituto Secoli, Bemberg™ invests in future generations of professionals in the textile and clothing sector also through BIELLA MASTER DELLE FIBRE NOBILI and Sanchi no Gakko (in Japanese “School of Textile & Yarn Production Site”) founded three years ago and supported for two years by Asahi Kasei through its “Bemberg Lab”.

PREMIUM GROUP in Berlin is cancelling its shows (c) Boris Kralj
Anita Tillmann
22.04.2020

PREMIUM GROUP in Berlin is cancelling its shows

  • The PREMIUM GROUP in Berlin is cancelling its PREMIUM and SEEK trade shows for this summer season, as well as the FASHIONTECH conference – in collaboration with the leading global digital B2B marketplace, JOOR, there is still a guaranteed trading option.


Due to the coronavirus crisis, in April the dates of the PREMIUM GROUP’s events were provisionally moved from the original schedule of 31 June-2 July 2020 to 28 -30 July. Now, the Federal and State governments have decided to cancel large-scale events with over 1,000 visitors until 31 August 2020.
     
A statement from Anita Tillmann, Managing Partner of the PREMIUM GROUP: 

  • The PREMIUM GROUP in Berlin is cancelling its PREMIUM and SEEK trade shows for this summer season, as well as the FASHIONTECH conference – in collaboration with the leading global digital B2B marketplace, JOOR, there is still a guaranteed trading option.


Due to the coronavirus crisis, in April the dates of the PREMIUM GROUP’s events were provisionally moved from the original schedule of 31 June-2 July 2020 to 28 -30 July. Now, the Federal and State governments have decided to cancel large-scale events with over 1,000 visitors until 31 August 2020.
     
A statement from Anita Tillmann, Managing Partner of the PREMIUM GROUP: 

“We greatly regret the decision of course, especially after the success of our January events. The ban on large-scale events has been around for some time and has been publicly discussed. It hurts us to do it, but we are also conscious of our responsibility. If cancelling our trade shows, conferences and parties contributes to the safety of our customers and visitors, then we have to take this step.
 
We are in close contact with all our brands and partners and have spent the last four weeks discussing possible approaches, concepts and new focal topics for the summer. The bottom line is that digitalisation is clearly the focus. It’s all about using the time over the next few months sensibly. The timing for brands and retailers is now right – all market participants are aware of the necessity of this.

We have been working closely with JOOR, the leading B2B marketplace globally, for around a year, after successfully integrating our own digital platform, Veee.com. JOOR has digitalised the entire procurement process and ensures a seamless, functioning wholesale process on an international scale – both for brands and retailers.
 
We shall shortly be offering webinars on this and can offer our customers an optimal, digital ordering solution so as to use this time of the pandemic efficiently. We are very happy with this option and our year-long investment in the topic of digitalisation. This has come good for us now.
 
Our trade show formats have been about more than just ordering for a long time now. They are about encounters, emotion, inspiration, communication and, finally, the fashion community getting together. Although lots can take place digitally nowadays, it doesn't replace physically meeting up in person. We have seen this more than ever in the present situation.
 
We are going to work on new concepts for 2021, and we will liaise with the key stakeholders in Berlin and with all others too to ensure we hit the ground running again. We’re taking on the challenge and will come back to the industry when we have news.”

ISKO logo
ISKOs shared its R-TWO Platform
11.03.2020

ISKO shared R-TWO™ at Drapers Sustainable Fashion Forum

ISKO presented its 100% responsible platform, R-TWO™.

The denim ingredient brand hosted a special panel to discuss some of the advancements in technology that are making the fashion industry more responsible: from R-TWO™ to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, ISKO was the headline sponsor at The Drapers Sustainable Fashion Forum brings together responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

ISKO presented its 100% responsible platform, R-TWO™.

The denim ingredient brand hosted a special panel to discuss some of the advancements in technology that are making the fashion industry more responsible: from R-TWO™ to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, ISKO was the headline sponsor at The Drapers Sustainable Fashion Forum brings together responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.
As evidence of its Responsible Innovation™ approach, ISKO presented the R-TWO™ program, its latest
responsible achievement. Stemming from the mill’s holistic vision, R-TWO™ represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its  environmental performance.
The R-TWO™ reduces the amount of raw material sourced by using a blend of reused cotton and recycled polyester – both certified –, improving sourcing efficiency throughout the entire field-to-fabric production.
Reused cotton is certified with the Content Claim Standard – or CCS – from the Textile Exchange. As for recycled polyester, it can be either Recycled Claim Standard (RCS) or Global Recycled Standard (GRS) certified, depending on the content percentages. Together with this cutting-edge and fully responsible program, ISKO also uses automated laser
technology developed in partnership with Jeanologia.

“How technology can help make the fashion industry more sustainable”:
On March 11th, ISKO hosted a discussion about ways, to make the fashion industry more responsible
The panel was moderated by David Shah, consultant on design and marketing development, Publisher and CEO at Metropolitan Publishing BV and Associate Professor at ARTez (Arnhem, the Netherlands) and Associate Professor at Renmin University, (Beijing, China). The talk involved Keith O’Brien, ISKO Marketing & Business Development Manager, Victoria Soto, Jeanologia Custom Technology Consultant and Filippo Ricci, Fashion Open Studio Program & Partnership Manager.

 

Source:

Menabò Group, Global Press and PR Support