From the Sector

In the first quarter of 2025, orders for textile machinery recorded by ACIMIT, the Association of Italian Textile Machinery Manufacturers, showed a sharp decline compared to the same period in 2024, down 29%. The index stood at 41.8 points (base year 2021=100).

The negative result reflects both a significant contraction in the domestic market and a pronounced slowdown abroad. In Italy, orders dropped by 57%, while foreign orders fell by 25%. The index for foreign markets stood at 43.3 points, while the domestic figure dropped to 30.5 points. The order backlog at the end of the quarter ensured 3.6 months of production.

The downturn also continues when compared to the previous quarter (October-December 2024), with overall orders decreasing by 15%.

Marco Salvadè, President of ACIMIT, commented: “The sector started 2025 on an even weaker footing than it ended 2024. On international markets, the deep uncertainty triggered by last year’s geopolitical tensions has been further worsened by the tariff decisions implemented by the Trump administration. In the US, orders remain at a standstill as the market awaits the next steps from the President. Some glimmers of hope come from the estimates of global export data for textile machinery in the first quarter: China, India, and Pakistan—key markets for technology suppliers—show signs of recovery compared to the same period in 2024.”

In Italy, the situation is even more critical, with the orders index at its lowest level, even surpassing the slump of 2020. “We need to look beyond 2025 and call on the Government to implement targeted, structural incentives for investments in capital goods, with simple procedures that allow companies to access them quickly”, Salvadè noted.

Increasingly weaker demand from key sales markets over the course of 2024 is slowing SGL Carbon's sales and earnings growth. Group sales in 2024 amounted to €1,026.4 million, down slightly by 5.8% on the prior-year level (2023: €1,089.1 million). The group's adjusted EBITDA decreased by 3.3% to €162.9 million (2023: €168.4 million).

Despite the slight decline in sales, the adjusted EBITDA margin improved from 15.5 % in the previous year to 15.9 % in 2024. This is mainly due to positive price and product mix effects.

Declining demand from the key semiconductor and automotive markets, coupled with persistently unsatisfactory demand from the wind industry, led to a decrease in volume and sales in three of four business units. Only Process Technology was able to improve its sales and adjusted EBITDA.

Earnings performance in the past fiscal year was strongly affected by non-recurring items of minus €118.5 million (2006: minus €52.9 million). These mainly included the impairment of assets of the Carbon Fibers business unit totaling €91.2 million (previous year: €44.7 million) and expenses from restructuring measures in the Carbon Fibers and Battery Solutions business lines totaling €19.0 million. After deducting one-off effects and non-recurring items as well as depreciation and amortization of €58.7 million (2023: €58.9 million), EBIT amounted to minus €14.3 million in 2024 (2023: €56.6 million).

Taking into account the financial result of minus €32.6 million (2023: minus €34.2 million) and tax expenses of €32.5 million (2023: €19.3 million), SGL Carbon recorded a net loss of €80.3 million (2023: net profit of €41.0 million) despite the solid overall business performance.

In 2024, the Carbon Fibers (CF) business unit's sales continued to decline, decreasing by 6.7% to €209.8 million (2023: €224.9 million). The decline was due in particularly to the continued low demand from the wind industry and the increasing competitive headwind resulting from global overcapacity for textile and carbon fibers.

Adjusted EBITDA in the Carbon Fibers business unit decreased by €18.2 million year-on-year to minus €11.0 million (2023: €7.2 million). The lack of fixed cost absorption led to high idle capacity costs and combined with declining margins for our fiber products, had a negative impact on adjusted EBITDA. It should be noted that the Carbon Fibers business unit included the result of the equity accounted activities (mainly the joint venture Brembo SGL Carbon Ceramic Brakes, BSCCB) in the amount of €15.8 million (2023: €18.3 million). Excluding the contribution from the equity-accounted BSCCB, the adjusted EBITDA of Carbon Fibers would amount to minus €27.0 million (2023: minus €10.9 million).

In February 2025, as part of the review of all strategic options for the Carbon Fibers, a decision was made to extensively restructure the Carbon Fibers business unit, which also includes the closure of unprofitable business activities. A complete sale of the Carbon Fibers activities was reviewed and is currently not considered feasible.

In the reporting period, sales in the Composite Solutions (CS) business unit amounted to €124.6 million, down 19.0% (2023: €153.9 million). The decline was due in particular to the premature expiration of a significant project-related supply contract with an automotive customer.

As a result of lower volumes and product mix effects, CS's adjusted EBITDA decreased by €4.0 million or 18.0% year on year to €18.2 million (2023: €22.2 million). It should be noted that the adjusted EBITDA includes a compensation payment of €3.0 million for a prematurely terminated customer contract. The adjusted EBITDA margin remained almost constant at 14.6% compared to the previous year (2023: 14.4%).

Forecast
For the year 2025, SGL Carbon expects different but overall challenging developments in their key sales markets. For the semiconductor industry and in particular for silicon carbide-based semiconductors, the demand is expected to remain moderate. The main reasons are lower than originally forecast growth rates for electric vehicles and continued high inventories at our customers site. At the earliest, demand could pick up in the second half of 2025. The company also expects a high degree of uncertainty combined with lower momentum for the automotive market segment.

The forecast for the current fiscal year 2025 takes into account all four operating business units, as they are still in the early stages of restructuring our Carbon Fibers business. Based on their assumptions regarding the development of the key sales markets, the managers expect consolidated sales for fiscal year 2025, including all business units, to be slightly below the previous year (2024: €1,026.4 million).

Taking into account all four operating business units, an adjusted EBITDA in 2025 is expected to range between €130 million and €150 million. Furthermore, the assumption is that the free cash flow at the end of the 2025 financial year - excluding payments for the planned restructuring of the CF - will be below the previous year's level but still positive (2024: €38.7 million).

Restructuring Carbon Fibers
On February 18, 2025, the Board of Management of SGL Carbon announced a restructuring of the loss-making CF business unit. This includes a significant reduction of CF's business activities and a focus on a profitable core. SGL Carbon's group sales guidance for 2025 excluding the expected sales contribution from CF would be approximately €200 million lower. On the other hand, the adjusted EBITDA for the remaining businesses excluding the operating adjusted EBITDA of CF would be between 155 – 175 million €.

“In the coming months, our work will focus on restructuring the carbon Fibers business unit and safeguarding our profitability. This includes focusing on new sales opportunities to further utilize our production capacities and strict cost management. The major trends such as digitization, climate-friendly transportation and renewable energy sources remain intact and are the drivers for our key sales markets. SGL Carbon will benefit from these trends and the associated growth opportunities in the medium and long term,” explains Andreas Klein, CEO of SGL Carbon SE.

From April 24 to 26, Karachi will host IGATEX, the International Garment & Textile Machinery Exhibition & Conference, the leading trade fair for the textile machinery sector in Pakistan. After many years, ACIMIT, the Association of Italian Textile Machinery Manufacturers, together with Italian Trade Agency, is once again organizing an Italian collective participation. A total of 11 companies will take part: 3 in the spinning hall and the remaining 8 in the finishing section. 10 are ACIMIT members companies: Audaces, Biancalani, Brazzoli, Danitech, Fadis, Ferraro, Mcs, Pinter Caipo, Pozzi Leopoldo, Zanfrini.

“In Pakistan, the textile sector, after a long period of strong investments in plants and machinery, has experienced a significant downturn due to a worsening macroeconomic situation in recent years,” commented Marco Salvadè, president of ACIMIT. The trend in Italian textile machinery exports to Pakistan reflects the decline in demand. The value of textile machinery sold to Pakistan dropped from 134 million euro in 2021 to 44 million euro in 2023. However, in the first nine months of 2024, Italian sales rebounded to 34 million euro, marking a 27% increase compared to the same period in 2023.

“Despite the challenges faced by Pakistani textile companies in recent years,” Salvadè concluded, “the recovery of our exports confirms the validity of ACIMIT and ICE’s decision to organize an Italian collective participation at IGATEX 2025. I believe it is crucial to maintain a presence in the local market, where we are also active with a technological training center at the National Textile University in Faisalabad, established in collaboration with PISIE – the International Polytechnic for Industrial and Economic Development – and Italian Trade Agency. Innovation and quality, which define Italian machinery, remain key factors in further enhancing the international competitiveness of Pakistani textile companies.”

In the fourth quarter of 2024, the index of orders for Italian textile machines, compiled by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, showed a 19% decline compared to the same period in 2023. In absolute terms, the index stood at 49.6 points (base 2021=100).

This result is due to a slight increase in order intake from the domestic market, contrasted by a decline in foreign markets. Orders in Italy grew by 6%, while abroad a 22% drop was recorded. The absolute value of the index in foreign markets was 48.3 points, while in Italy, it reached 58.5 points. In the fourth quarter, the order backlog ensured 3.3 months of production.

Overall, in 2024, the index recorded a 16% decrease compared to the 2023 average. Domestically, the index grew by 10%, whereas abroad there was a 19% decline.

Marco Salvadè, president of ACIMIT, commented: “The order index for the October-December 2024 period confirms a still weak order intake. The negative trend in machinery demand continues, especially abroad. According to data updated to October 2024, our exports have declined in all major target markets in the first 10 months of the year. Except for the Chinese market, Turkey, India, the United States, and Germany have all seen a drop compared to the same period in 2023.”

In the 2024 financial year, the global automotive industry recorded a slight decline in produc-tion of –1.1%* compared to the previous year. In this weakening environment, Autoneum in-creased its consolidated revenue in Swiss francs by CHF 36.4 million to CHF 2 338.7 million. Excluding translational effects from the conversion of local currencies into Swiss francs, revenue rose by CHF 96.1 million or 4.2% to CHF 2 398.5 million, which is in the middle of the guidance of CHF 2.3 billion to CHF 2.5 billion. Based on the preliminary figures, Autoneum expects an EBIT margin of over 5% and free cash flow of just over CHF 100 million for the 2024 financial year, thus fully confirming the guidance.

Business Group Europe achieved revenue of CHF 1 152.4 million in the 2024 financial year, an increase of CHF 78.5 million compared to CHF 1 073.9 million in the previous year. In local curren-cies, revenue grew by 9.8%. The first-time consolidation of four instead of three quarters of Borgers Automotive, which was acquired in 2023, resulted in an inorganic increase of 13.0%. Organically, revenue in local currencies declined by 3.2%, outperforming the market, which recorded a decline of 4.6%*.

Business Group North America outperformed the market in local currencies: while vehicle pro-duction fell by 1.4%* overall, Business Group North America recorded a slight increase of 1.3% in revenue. Borgers Automotive made a positive contribution of 3.0% to inorganic growth, while the organic revenue change was –1.7%. Consolidated revenue in Swiss francs amounted to CHF 884.6 million. (2023: CHF 895.9 million).

Business Group Asia generated revenue of CHF 198.3 million in Swiss francs, which was CHF 44.5 million below the previous year (2023: CHF 242.8 million). In local currencies, revenue shrank by 15.3% overall. The organic decline in revenue amounted to 16.6%, while the additional first quarter of Borgers Automotive, which was acquired in 2023, had a positive impact of 1.3% in the reporting year. The market in Asia remained stable with a growth of 0.1%*. In 2024, local Chinese vehicle manufacturers continued to gain market share in China at the expense of Japanese and European producers, which was clearly reflected in the revenue development of Business Group Asia. This trend underlines the importance of the acquisition of the Chinese Jiangsu Huanyu Group, announced on November 19, 2024, which generates over 90% of its reve-nue with Chinese car manufacturers in China and will significantly strengthen Autoneum's market position.

Business Group SAMEA (South America, Middle East and Africa) achieved revenue growth of 14.4% in local currencies, mainly due to inflation-related price increases. In Swiss francs, revenue amounted to CHF 121.4 million. This corresponds to an increase of CHF 12.4 million or 11.3% compared to the previous year.

Weak demand in some of their customer markets is increasingly hindering SGL Carbon's sales growth. After nine months in 2024, SGL Carbon generated sales of €781.9 million, which was slightly below the prior-year level at minus 4.8% (9M 2023: €821.7 million). Adjusted for currency and structural effects, Group sales decreased by 3.6%. Adjusted EBITDA, an important key figure for the Group, remained at a comparable level of €127.6 million in the reporting period (9M 2023: €130.0 million). Despite the slight decrease in sales, the adjusted EBITDA margin improved from 15.4% in Q1 and 16.7% in Q2 to 16.9% in Q3 and amounted to 16.3% after nine months (9M 2023: 15.8%). The reasons for the improved adjusted EBITDA margin are, in particular, product mix effects in the Graphite Solutions and Process Technology business units. By contrast, the ongoing weakness in demand and the associated price pressure for carbon and textile fiber products in the Carbon Fibers business unit continued to weigh on the Group's sales and earnings development.

“Even with our diversified product portfolio, we can no longer completely withdraw from the generally weak economic environment. In addition, there was a decline in demand for specialty graphite products for the semiconductor industry in the third quarter. In particular, our products for the manufacture of silicon carbide-based semiconductors are suffering from the restrained demand for electric vehicles on the customer side,” explains CEO Dr. Torsten Derr. “While the last 18 months were characterized by enormous demand for silicon carbide semiconductors and insufficient production capacities, the market has cooled down significantly. Due to a lack of demand from the automotive industry, our semiconductor customers have significantly reduced order volumes. We do not expect to see a significant upturn in demand for our specialty graphite products until the sales figures for electric vehicles pick up again.”

Based on the adjusted EBITDA of €127.6 million and taking into account depreciation and amortization of €41.0 million (9M 2023: €43.3 million) and one-off effects as well as non-recurring items of minus €18.3 million (9M 2023: minus €47.2 million), EBIT after nine months of 2024 will be €68.3 million (9M 2023: €39.5 million). The one-off effects and non-recurring items result, among other things, from the restructuring measures at Carbon Fibers and the Battery Solutions business line as well as from expenses for a strategy project. When comparing with the previous year, it should be noted that the first nine months of 2023 were disproportionately affected by an impairment loss on the assets of Carbon Fibers (€44.7 million).

Development of the business units
The Carbon Fibers business unit's sales for the first nine months of 2024 amounted to €157.1 million, significantly below the figure of €179.6 million for the prior-year period. The decline is due in particular to the continued weak demand from the wind industry and to the increasing competitive pressure resulting from global overcapacities for carbon and textile fibers.

Idle production capacities and the associated lack of fixed cost absorption as well as declining margins for commodity products led to a further deterioration in the adjusted EBITDA of the Carbon Fibers. The adjusted EBITDA of the Carbon Fibers business unit fell to minus €7.9 million in the first nine months of 2024 (9M 2023: €3.2 million). It should be noted that the adjusted EBITDA of the Carbon Fibers business unit includes an earnings contribution of €11.6 million from the joint venture BSCCB, which is accounted for At-Equity (9M 2023: €14.1 million). Excluding this contribution from the At-Equity accounted BSCCB, the adjusted EBITDA of Carbon Fibers would have been minus €19.6 million (9M 2023: minus €10.5 million).

SGL Carbon assumes that demand for carbon fibers will not recover in the coming months and that the realizable prices for these products will remain at a low level beyond 2025. Therefore, SGL Carbon anticipates that the expected improvement in sales and earnings for the Carbon Fibers segment will be delayed and is revising its existing mid-term planning for this segment. Due to the expected deviation, an ad hoc impairment test is currently being carried out. This indicates a non-cash impairment charge of €60–80 million, which will be recognized in Q4 2024. The structured transaction process initiated for Carbon Fibers is still ongoing.

Sales in the Composite Solutions business unit amounted to €95.8 million in the first nine months of 2024, down 16.2% (9M 2023: €114.3 million). The decline is due in particular to the early termination of a project-related supply contract with an automotive customer. Furthermore, the lower sales figures for electric vehicles are also having an impact on Composite Solutions.

Adjusted EBITDA in Composite Solutions fell from €16.6 million in the prior-year period to €10.7 million (minus 35.5%), due in particular to lower volumes. The adjusted EBITDA margin weakened accordingly to 11.2% (9M 2023: 14.5%).

Outlook
Macroeconomic conditions, lower than expected sales volumes in some customer groups and price pressure for commodity products are increasingly hindering SGL Carbon's growth ambitions. Thomas Dippold, CFO of SGL Carbon, explains: “Due to the diverse and diversified industrial applications of our products and our strict cost management, we continue to expect to achieve our guidance for 2024 at the lower end of the range of €160–170 million. The coming months will not be easier. We need to prepare for a flat demand development in some of our sales markets.”

Europe’s textile sorting and recycling industry is currently experiencing an unprecedented crisis, even more significant than during the COVID-19 pandemic. The sector is under immense pressure due to several global disruptions, including the war in Ukraine, logistical challenges in Africa, and the rise of ultra-fast fashion.

As a result, there is an oversupply of used textiles and a sharp decline in demand from traditional export markets. The trade in used textiles between the EU and non-EU decreased from 464,993 tonnes in 2022 to 430,185 tonnes in 2023. Looking at Germany alone, the exports of used textiles to Ghana (one of Europe’s key export markets) have decreased from 7911.2 tonnes in 2020 to 4532.9 tonnes in 2023. Additionally, demand for recycled materials remains low: recycled cotton had an estimated production volume of 319 000 tonnes in 2023 (compared to 24.4 million tonnes of virgin cotton) globally.

Consequently, prices for second-hand textiles have plummeted, while the costs of collection, sorting, and recycling have skyrocketed. Since spring 2024, the prices for sorted second-hand garments no longer cover processing costs, leading to major cash flow problems for sorting operators. Warehouses are becoming overwhelmed, increasing the risk of textile waste being incinerated.

In a joint statement EuRIC Textiles and Municipal Waste Europe expressed their concerns about the development of Europe’s textiles sorting and recycling sector. They have clearly specified what support they expect from Brussel:

“We call on the EU to encourage Member States to lower VAT on textile repair, reuse, and recycling activities, within the existing VAT Directive framework, and explore the possibility of introducing a tax on new, petroleum-based materials. Such measures, if adopted at national levels, would incentivise the use of recycled materials and reduce the environmental impact of virgin textile production.

This situation is likely to raise processing costs for municipalities, potentially resulting in higher waste disposal fees for residents, with the fear that the textiles will be thrown in the residual waste instead. Downstream players in the recycling chain, such as tearing and spinning mills, are also feeling the strain, leading to significant staff cuts.

To avert widespread bankruptcies, immediate financial and legislative support is essential. Short-term financial incentives for EU companies that contribute significantly to a sustainable circular textile chain are needed to safeguard the industry from collapsing. Investment in recycling technologies and infrastructure, alongside targeted support for municipalities dealing with textile waste stagnation, is crucial. We urge the EU to facilitate public-private partnerships to foster innovation in textile recycling and to scale up recycling technologies. This will help increase Europe’s capacity to process textile waste sustainably and efficiently. A swift revision of the Waste Framework Directive (WFD) and rapid implementation of Extended Producer Responsibility (EPR) schemes are also imperative.

In the mid-term, efforts should focus on making the textiles reuse and recycling sector competitive, in line with Commission President Ursula Von der Leyen’s ambition for a competitive and strong circular economy (through a future Clean Industrial Deal and Circular Economy Act). To reach this ambition, the EU needs to increase demand for recycled textiles, expand recycling capacity, and promote the use of sustainable materials through upcoming ecodesign requirements. We call for the mandatory inclusion of a percentage of recycled textile content (most preferably from post-consumer textiles) in all new textile products placed on the EU market, with a clear trajectory for increasing this percentage over the coming years. Without urgent action, Europe risks undermining its climate goals and jeopardising the future of its textile sorting and recycling industry.”

About 50 Italian companies will exhibit at ITMA ASIA + CITME 2024, taking place from October 14 to 18 in Shanghai. With an area of around 1,400 square meters, Italy ranks among the top exhibiting Countries, as in previous editions. 29 Italian exhibitors will show their innovations within the National Sector Groups, organized by ACIMIT (Association of Italian Textile Machinery Manufacturers) and Italian Trade Agency.

ITMA ASIA + CITME show has always been the main showcase for textile machinery manufacturers in Asia, that absorbs over 50% of global exports. Moreover, China is the world’s largest market in the sector (the value of imported textile machinery in 2023 was around 2.6 billion euro).

For Italian manufacturers as well, the Chinese market is the top foreign destination. In 2023, Italian sales to China amounted to 222 million euro. In the first six months of this year, exports to China increased by 38%, while the performance of total Italian exports declined slightly in the same period.

“We hope that the recovery of the Chinese market, observed in this first half of the year, may be an early indication of a more general upturn in global demand for machinery,” says ACIMIT President Marco Salvadè. Over the past few years, demand from Chinese companies has turned to technologies that combine savings in production costs and environmental friendliness, as also demanded by brands and end consumers. “Today, Italian manufacturers can offer highly customized solutions that are particularly suited to making textile production more sustainable,” confirms Salvadè. “The Chinese textile machinery market is rapidly evolving, and the level of innovation in the technology requested has risen due to the growing international competition that even Chinese companies face. In Shanghai, Italian manufacturers will display their latest innovations, essential for making textile production more efficient and sustainable.”

About 50 Italian companies will exhibit at ITMA ASIA + CITME 2024, taking place from October 14 to 18 in Shanghai. With an area of around 1,400 square meters, Italy ranks among the top exhibiting countries, as in previous editions. 29 Italian exhibitors will show their innovations within the National Sector Groups, organized by ACIMIT (Association of Italian Textile Machinery Manufacturers) and Italian Trade Agency.

ITMA ASIA + CITME show has always been the main showcase for textile machinery manufacturers in Asia, that absorbs over 50% of global exports. Moreover China is the world’s largest market in the sector (the value of imported textile machinery in 2023 was around 2.6 billion euro).

For Italian manufacturers as well, the Chinese market is the top foreign destination. In 2023, Italian sales to China amounted to 222 million euro. In the first six months of this year, exports to China increased by 38%, while the performance of total Italian exports declined slightly in the same period.

“We hope that the recovery of the Chinese market, observed in this first half of the year, may be an early indication of a more general upturn in global demand for machinery,” says ACIMIT President Marco Salvadè. Over the past few years, demand from Chinese companies has turned to technologies that combine savings in production costs and environmental friendliness, as also demanded by brands and end consumers. “Today, Italian manufacturers can offer highly customized solutions that are particularly suited to making textile production more sustainable,” confirms Salvadè. “The Chinese textile machinery market is rapidly evolving, and the level of innovation in the technology requested has risen due to the growing international competition that even Chinese companies face. In Shanghai, Italian manufacturers will display their latest innovations, essential for making textile production more efficient and sustainable.”

• Graphite Solutions with slight sales growth and positive margin development
• Process Technology again improves on good prior-year figures
• Weak demand in Carbon Fibers continues to impact Group sales and profitability
• Despite slight decline in sales (-4.0%), EBITDA margin improves from 15.7% to 16.1% compared to the first half of the previous year
• Outlook for 2024 confirmed

Q2 2024 confirms SGL Carbon's business development in an increasingly volatile market environment. After €272.6 million in Q1 and €265.4 million in Q2, SGL Carbon generated consolidated sales of €538.0 million in the first half of 2024 (H1 2023: €560.5 million). This corresponds to a slight decrease of 4.0% compared to the prior year period; adjusted for currency effects, Group sales decreased by only 2.2%. By contrast, adjusted EBITDA, an important key figure for the Group, remained almost constant year-on-year at €86.5 million (H1 2023: €88.0 million). The adjusted EBITDA margin improved from 15.7% to 16.1%, in particular due to the continued positive sales trend in the Semiconductor market segment and the associated change in the product mix. On the other hand, the persistently weak demand in the Carbon Fibers business unit continued to weigh on the Group's sales and earnings
performance.

Outlook
The current volatile development in some of their sales markets, which in some cases is below expectations, affects the expected sales and earnings performance of the business units. Due to the company's diversified business model, changes in demand for certain products can be largely offset by higher-than-expected sales in other businesses. SGL Carbon therefore continued to expect to achieve the forecast which was issued in March for the SGL Carbon Group at the lower end of the stated range. For fiscal year 2024, SGL Carbon expects Group sales to be at the previous year's level (2023: €1,089.1 million) and adjusted EBITDA at Group level to be between €160 million and €170 million.

Thomas Dippold, CFO of SGL Carbon, explains: “One of our most important market segments is the semiconductor industry and in particular the demand for graphite components for the production of silicon carbide-based semiconductors. These are used primarily in electric vehicles due to their higher efficiency and performance. In the first half of 2024, global demand for electric vehicles slowed compared to the growth in previous quarters, and a return to the previous year's growth rates is not expected in the coming months. In addition, there are high inventory levels in the semiconductor value chain, which are also impacting demand for our products. Even if we assume that the market for high-performance semiconductors for electric vehicles will continue to grow significantly in the future, we expect demand for our specialty graphite components for the production of SiC-based semiconductors to slow down in the second half of 2024. For Graphite Solutions, however, we continue to expect sales and adjusted EBITDA to be above the previous year."

On the other hand, other market segments are developing better than expected and can thus compensate for fluctuations in demand within the SGL Carbon Group. Taking into account the business unit developments in the first half of 2024 and the expected trends for their key sales markets, the Company expects to meet its forecast for sales and adjusted EBITDA in fiscal year 2024 at the lower end of the announced range.